Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Nanofabrication of Metasurfaces with Polarization-Dependent Response

  • Matricardi, Cristiano
  • García Pomar, Juan Luis
  • Molet, Pau
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Metal nanostructures offer exciting ways to manage light at the nanoscale exploited in fields such as imaging, sensing, energy conversion, and information processing. The optical response of the metallic architectures can be engineered to exhibit photonic properties that span from plasmon resonances to more complex phenomena such as negative refractive index, optical chirality, artificial magnetism, and more. However, the latter optical properties are only observed in intricate architectures, which are highly demanding in terms of nanofabrication and hence less scalable and far away from device implementation. Here, a series of metasurfaces covering centimeter areas and operating in the visible spectrum are presented, which are produced from the combination of nanoimprinting lithography and oblique angle metal evaporation. The potential of this scalable approach is illustrated by easily fabricating metasurfaces engineered to exhibit artificial optical magnetism, tunable linear polarization dependent response, chirality with g‐factor of 0.2, and photoluminescence enhancement of 20 times over a 9 mm2 area., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016‐79053‐P and through Grant No. SEV‐2015‐0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement Nos. 637116, ENLIGHTMENT and 648901, FOREMAT) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofunded by the ESF. L.A.P. is thankful to the Marie Sklodowska‐Curie Actions (H2020‐MSCA‐IF‐2018) for grant agreement No. 839402, PLASMIONICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large-Scale Soft-Lithographic Patterning of Plasmonic Nanoparticles

  • Chiang, Naihao
  • Scarabelli, Leonardo
  • Vinnacombe-Willson, Gail A.
  • Pérez, Luis Alberto
  • Dore, Camilla
  • Mihi, Agustín
  • Jonas, Steven J.
  • Weiss, Paul S.
Micro- and nanoscale patterned monolayers of plasmonic nanoparticles were fabricated by combining concepts from colloidal chemistry, self-assembly, and subtractive soft lithography. Leveraging chemical interactions between the capping ligands of pre-synthesized gold colloids and a polydimethylsiloxane stamp, we demonstrated patterning gold nanoparticles over centimeter-scale areas with a variety of micro- and nanoscale geometries, including islands, lines, and chiral structures (e.g., square spirals). By successfully achieving nanoscale manipulation over a wide range of substrates and patterns, we established a powerful and straightforward strategy, nanoparticle chemical lift-off lithography (NP-CLL), for the economical and scalable fabrication of functional plasmonic materials with colloidal nanoparticles as building blocks, offering a transformative solution for designing next-generation plasmonic technologies., The authors would like to thank the Nanoquim clean room facility at ICMAB-CSIC and, in particular, Dr. Luigi Morrone for help with the use of the microwriter for master preparation. We acknowledge the CNSI-EICN, ICMAB-CSIC, and ICN2 electron microscopy facilities for TEM and SEM imaging, WiTEC for access to their microscopy instrumentation, and Dr. Thomas Young and Michael Mellody for the preparation of silicon masters. Special thanks to Dr. Leonora Velleman for the fruitful discussion on nanoparticle self-assembly. L.S. research is supported by the Marie Sklodowska-Curie Actions SHINE (H2020-MSCA-IF-2019, grant agreement No. 894847) and the 2020 Post-doctoral Junior Leader-Incoming Fellowship by “la Caixa” Foundation (ID 100010434, fellowship code LCF/BQ/PI20/11760028). L.A.P. thanks the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2018) for grant agreement No. 839402, PLASMIONICO. L.S., L.A.P., C.D., and A.M. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). ICMAB acknowledges the Spanish Ministry of Economy and Competitiveness under grants PID2019-106860GB-I00 (AEI/FEDER, UE) and FUNFUTURE (CEX2019-000917-S) center of excellence Severo Ochoa program. This work has been performed in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. N.C. thanks the NIH NIBIB Pathway to Independence Award (K99EB028325) for support. S.J.J. is supported by the NIH Common Fund through a NIH Director’s Early Independence Award co-funded by the National Institute of Dental and Craniofacial Research and Office of the Director, NIH Grant DP5OD028181. S.J.J. also acknowledges Young Investigator Award funds from the Alex’s Lemonade Stand Foundation for Childhood Cancer Research and the Hyundai Hope on Wheels Foundation for Pediatric Cancer Research. P.S.W. thanks the National Science Foundation (2004238) for support of this work. Funds for core facility use were provided via a support voucher awarded to N.C. and S.J.J. via the UCLA Clinical and Translational Science Institute (CTSI) Core Voucher Program, which is administered through Grant Number UL1TR001881., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient infrared sunlight absorbers based on gold-covered, inverted silicon pyramid arrays

  • Hu, Jinhui
  • Pérez, Luis Alberto
  • García Pomar, Juan Luis
  • Mihi, Agustín
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption stems from the resonant excitation at infrared wavelengths of surface-plasmon polaritons at the metal/dielectric interface mainly by tuning size and separation of the inverted pyramids. The array-parameter optimization proceeded by iteration of the calculation and measurement of the infrared response using finite difference time-domain simulations and Fourier-transform IR spectroscopy, respectively. We analyse the calculated near-field distributions specifically looking for the presence of hot spots, i.e. nano-sized regions of very high concentration of the electronic charge and strong electromagnetic field enhancement, and discuss their potential for hot-electron generation. We show two fabrication routes for this kind of metal/silicon metamaterial either by photolithography or scalable nanoimprint techniques for a seamless integration in optoelectronic fabrication processes., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Individual Fellowship (MGA MSCA-IF) grant agreement No. 839402 (PLASMIONICO). The Spanish “Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/)” is gratefully acknowledged for its support through grants SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grant PGC2018-095411-B-100 (RAINBOW) and PID2019-106860GB-I00 (HIGHN). The authors also thank the Catalan agency AGAUR for grant 2017-SGR-00488. JLG-P acknowledges support of MSCA-IF fellowship grant agreement No. 840064 (2D_PHOT); JH acknowledges a fellowship from the China Scholarship Council (CSC) and the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Chiro-Optical Activity of Plasmonic Metasurfaces with Inverted Pyramid Arrays

  • Pérez, Luis Alberto
  • Hu, Jinhui
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Arteaga, Oriol
  • Goñi, Alejandro R.
  • Mihi, Agustín
Chiral plasmonics has emerged as a powerful tool for manipulating light at the nanoscale with unprecedented control over light polarization. The advances in nanofabrication have led to the creation of nanostructures that support strong chiroptical responses. However, the complexity of the fabrication and the associated high costs remain major challenges in upscaling these architectures. Here, we report on the development of chiral plasmonic metasurfaces composed of inverted pyramid arrays with mismatched directions with respect to the lattice vectors of the array. These metasurfaces are fabricated using a combination of soft lithography and anisotropic etching, resulting in cost-effective and reproducible chiral nanostructures without the need for expensive equipment. The fabricated metasurfaces exhibit high differential transmittance values in the visible spectrum, which are among the highest reported for plasmonic films. Theoretical modeling corroborates the experimental results, demonstrating the significant influence of the mismatch angle on the chiral behavior. Complete polarimetric characterization reveals exceptional chiro-optical activity with circular birefringence exceeding 375°/μm and Kuhn's dissymmetry factors (g-factors) approaching unity., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Individual Fellowship (MSCA-IF) grant agreement No. 839402 (PLASMIONICO) and from the Spanish Ministerio de Ciencia e Innovación through grants, TED2021-132807B–I00 and TED2021-129639B–I00 by the “European Union NextGenerationEU/PRTR. Financial support from the State Investigation Agency through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and PID2022-141956NB-I00 (OUTLIGHT) and from the Catalan agency AGAUR (2021-SGR-00444) is gratefully acknowledged as well. JH acknowledges a fellowship from the China Scholarship Council (CSC) and the PhD program in Materials Science from Universitat Autònoma de Barcelona, in which he was enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed