Pasar al contenido principal

SYNATRA: Arquitecturas sinérgicas para agrovoltaica de nueva generación integrando módulos fotovoltaicos orgánicos transparentes

PLEC2022-009323

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO EURECAT

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tansley review: Molecular mechanisms of shade tolerance in plants

  • Martinez-Garcia, J.F.
  • RODRIGUEZ-CONCEPCION, Manuel|||0000-0002-1280-2305
[EN] Shade tolerance is an ecological concept used in a wide range of disciplines, from plant physiology to landscaping or gardening. It refers to the strategy of some plants to persist and even thrive in environments with low light levels because of the shade produced by the vegetation proximity (e.g. in the understory). Shade tolerance influences the organization, structure, functioning, and dynamics of plant communities. However, little is known about its molecular and genetic basis. By contrast, there is a good understanding on how plants deal with the proximity of other plants, a divergent strategy used by most crops to respond to vegetation proximity. While generally shade-avoiding species strongly elongate in response to the proximity of other plants, shade-tolerant species do not. Here we review the molecular mechanisms that control the regulation of hypocotyl elongation in shade-avoiding species as a reference framework to understand shade tolerance. Comparative studies indicate that shade tolerance is implemented by components also known to regulate hypocotyl elongation in shade-avoiding species. These components, however, show differential molecular properties that explain how, in response to the same stimulus, shade-avoiding species elongate while shade-tolerant ones do not., Research in our laboratories is supported by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR grants PID2020-115782GB-I00 and PLEC2022-009323 (to JFM-G), PID2020-115810GB-I00 (to MR-C) and the EC-H2020-PRIMA UToPIQ project (PCI2021-121941). Funding from Generalitat Valenciana (ENIGmA project, PROMETEU/2021/065) and CSIC (grants 202040E256 to JFM-G, and 202040E299 to MR-C) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DNA-binding activity of PIF7 links phytochrome B signaling to plant responses to vegetation proximity

  • Diaz-Lopez, Marta
  • Pastor-Andreu, Pedro
  • Qin, Wenting
  • Sánchez-García, Ángela
  • Burbano-Erazo, Esteban
  • Valverde, Laura
  • Paulisic, Sandi
  • Rodriguez-Concepcion, Manuel
  • Moreno-Romero, Jordi
  • Martínez-García, Jaume F.
[EN] PHYTOCHROME INTERACTING FACTORs (PIFs) are transcription factors that act as central signaling hubs in light-regulated processes. All PIFs contain an active phytochrome B-binding motif and a DNA-binding basic helix-loop-helix domain. In the shade-avoider Arabidopsis thaliana, PIF7 is a major promoter of hypocotyl elongation in response to vegetation proximity, becoming active when released from phytochrome B via its active phytochrome B-binding motif. Here we show that PIF7 promotes seedling elongation in other species, including the shade-avoider tomato and the shade-tolerant Cardamine hirsuta, suggesting that PIF7 has retained some of its key functional domains across diverse plants. Through complementation analyses using PIF7 variants lacking either the active phytochrome B-binding or basic helix-loop-helix domain, we demonstrate that, unlike PIF3, PIF7 versions unable to bind phytochrome B remain active regardless of light conditions, whereas loss of DNA-binding capacity fully disrupts PIF7 function. Our results further suggest that phytochrome B interaction imposes a dual regulatory control over PIF7, modulating both its abundance and its phosphorylation state (ie its ability to bind and regulate target genes)., Support for this work was provided by a Juan de la Cierva postdoctoral contract (reference FJC2021-046591-I) to M.D.-L. funded by the AEI (Spanish Agencia Estatal de Investigacion, MCIU/AEI/10.13039/501100011033) and European extGenerationEU/PRTR, a postdoctoral contract funded by the European Commission (H2020-MSCA-IF-2017, Proposal 797473) and a Ramon y Cajal contract (RYC2020-028933-I) funded by the AEI and "ESF Investing in Your Future" to J.M.-R., a predoctoral Chinese Scholarship Council (CSC) fellowship to W.Q. (201806910055), and a predoctoral fellowship from Colombia's Colciencias Doctorado Exterior program (MINCIENCIAS885/2020) to E.B.-E. Our research is supported by the PRIMA project UToPIQ (PCI2021-121941) funded by the AEI and "European Union NextGeneration EU/PRTR" to M.R.-C.; grants BIO2017-85316-R (funded by the AEI and "ERDF A Way of Making Europe"), PID2020-115782GB-I00 (funded by the AEI), PLEC2022-009323 (funded by the AEI and "European Union NextGeneration EU/PRTR"), PID2023-149395NB-I00 (funded by the AEI and "ERDF/EU"), and CIPROM/2024/41 (funded by Generalitat Valenciana) to J.F.M.-G.; and PID2021-128803NB-I00 (funded by the AEI and "ERDF/EU") to J.M.-R. We are part of the Spanish network EvoDevoSigNet, RED2022-134917-T, funded by the AEI. This work was supported by institutional grant CEX2025-001626-S (Center of Excellence Severo Ochoa) funded by MCIU/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A shade-hyposensitive tomato line shows altered auxin homeostasis and higher fruit yield under high-density field conditions

  • Burbano-Erazo, Esteban
  • Francesca, Silvana
  • Simon-Moya, Miguel
  • Berdonces, Andrea
  • Valverde, Laura
  • Pérez-Beser, Jose
  • Addonizio, Matteo
  • Rigano, Maria Manuela
  • Palau-Rodriguez, Julia
  • Martínez-García JF|||0000-0003-1516-0341
  • RODRIGUEZ-CONCEPCION, Manuel|||0000-0002-1280-2305
[EN] Plants detect the presence of nearby vegetation as a reduced ratio of red to far-red light (low R : FR). This proximity shade signal can be simulated in the lab by supplementing white light (W) with FR (W + FR). While shade avoidance strategies are considered undesirable in agricultural crops, FR supplementation enhances plant growth and fruit quality in tomato (Solanum lycopersicum). Here we compared the response of different tomato genotypes to W + FR in the lab and identified one Solanum pennellii introgression line (IL2-2) with a shade-tolerant phenotype at the seedling stage. Compared to the shade-avoider parental genotype M82, IL2-2 plants showed reduced elongation upon W + FR exposure and a disrupted expression of auxin-related genes both under W and W + FR. At harvest, W + FR treatment improved M82 fruit quality by increasing degrees Brix, ascorbic acid, and carotenoids, and these quality traits remained virtually unchanged in IL2-2. Under high density (HD) conditions, fruit quality traits were hardly impacted by planting density or genotype, but IL2-2 showed improved fruit yield. Our findings suggest that IL2-2 could serve as a valuable genotype for high-density or intercropping agrosystems., We thank the staff at the IBMCP Metabolomics Platform for technical support. This study was part of the PRIMA project UToPIQ funded by the Italian Ministero dell'Istruzione e del Merito (MIUR) to MMR (reference E79J21005760001) and the Spanish Agencia Estatal de Investigacion (AEI, MCIN/AEI/10.13039/501100011033) and European Commission NextGeneration EU/PRTR to MR-C (reference PCI2021-121941). Additional funding for MMR and MR-C came from the EU/COST-funded ReCrop network (Reproductive Enhancement of CROP resilience to extreme climate, CA22157). We also acknowledge the support of MICIN/AEI grants PID2020-115810GB-I00, RED2022-134577-T and PID2023-149584NB-I00 to MR-C and PID2020-115782GB-I00, PLEC2022-009323, and PID2023-149395NB-I00 to JFM-G and Generalitat Valenciana grants AGROALNEXT/2022/067 to MR-C and PROMETEU/2021/056 to JFM-G. EB-E received a predoctoral fellowship from Colombia's Colciencias Doctorado Exterior program (MINCIENCIAS885/2020). JP-R is supported by a predoctoral fellowship from AEI (PRE2021-099195).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Increasing Polymer Molecular Weight Enables Low-Donor-Content, Efficient and Scalable Semitransparent Organic Solar Cells

  • Martín-Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Burgués-Ceballos, Ignasi
  • Campoy-Quiles, Mariano
[Abstract]: The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., AGAUR; 2021-SGR-00444
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the degradation mechanisms in roll-to-roll P3HT-based organic photovoltaic modules

  • Adel, Rana
  • Grüne, Jeannine
  • Klotz, Jannis
  • Stella, Marco
  • Dyakonov, Vladimir
  • Campoy Quiles, Mariano
  • Sperlich, Andreas
  • Martínez Ferrero, Eugenia
Solution-processed organic solar modules offer a promising approach for low-cost and flexible organic photovoltaic (OPV) technology. However, one of the key challenges of these devices is the degradation of materials over time, leading to overall limited module stability, which ultimately results in a decrease in efficiency. In this study, the environmental degradation mechanisms of roll-to-roll slot-die organic solar modules have been investigated by means of photovoltaic, spectroscopic and electron paramagnetic resonance (EPR) measurements. The degradation of modules based on blends of P3HT with PC61BM fullerene or with non-fullerene o-IDTBR acceptors has been analyzed following the ISOS-L-1 protocol. Moreover, two different encapsulating materials have also been studied. Our results indicate that the fullerene acceptor provides better stabilization to the donor polymer than the non-fullerene acceptor. Additionally, oxygen diffusion affects not only the photoactive layer components but also the hole transport layer. Finally, the encapsulation with adequate materials, such as a barrier foil offering UV protection, allows for longer lifetimes., All the authors acknowledge financial support from the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651. MCQ thanks the Ministry of Science and Education of Spain and the European Union NextGenerationEU/PRTR for funding through grant TED2021-131911B-I00 and PLEC2022-009323., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Burgués Ceballos, Ignasi
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín|||0009-0006-9755-3913
  • Pinyol Castillo, Paula|||0000-0002-4927-3371
  • Rodríguez Martínez, Xabier|||0000-0002-6715-4392
  • Martín, Jaime|||0000-0002-9669-7273
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Organic photovoltaics as an agricultural protective cover: lessons learned from the first flexible agrivoltaic installation in a European apple orchard, Fotovoltaics orgànics com a cobertura protectora agrícola: lliçons apreses de la primera instal·lació d'agrovoltaica flexible en un camp de pomes europeu

  • Pinyol Castillo, Paula|||0000-0002-4927-3371
  • Tijero, Verónica
  • Vidal Tur, Margalida
  • Martín-Ruiz, Martín
  • Nikolaidou, Katerina
  • Gibert-Roca, Martí
  • Molas, Sílvia
  • Martinez-Garcia, Jaume F.
  • Asín, Luís
  • Campoy Quiles, Mariano
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
Semitransparent organic photovoltaics (ST-OPV) offer a promising path toward lightweight and spectrally selective agrivoltaics. Yet, the number of reports in real openfield scenarios remains limited. In this interdisciplinary work, we develop an agricultural protective cover integrating flexible ST-OPV modules with tailored light absorption to favour the simultaneous production of energy and plants. First, we evaluate the suitability of the blend PTB7-Th:IEICO-4F:PC70BM for this application, obtaining a maximum light utilisation efficiency for plants (LUEP) of 4.5% in lab-scale devices. We then show the gradual upscaling of devices from opaque laboratory cells to industrially roll-to-roll manufactured large-area ST-OPV modules. The transition from opaque to semitransparent electrodes, and the shift from rigid devices to flexible modules using large-scale deposition techniques are identified as the main contributors to efficiency losses in the chosen OPV stack. Remarkably, we demonstrate the successful production of large-area ST-OPV modules (1925 cm², 3.7% PCE) with roll-to-roll slot-die coating. Preliminary greenhouse tests indicated minor effects on physiological parameters of adult plants. Then, a 22 m² prototype was installed over an experimental apple orchard, where outdoor stability tests revealed a progressive voltage loss, together with reliability limitations associated with the presence of hot-spots, soiling, and wind-induced structural failure. Despite these operational challenges, the prototype remained operational for 3.5 months, reducing ground temperature by ~10 °C, and showing no negative impact on key plant production yield nor fruit quality traits., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M. P. P.-C. is a fellow of Eurecat's “Vicente López” PhD grant. P. P.-C. is enrolled in the Doctoral Programme in Materials Science and Engineering at the Universitat Politècnica de Catalunya (UPC). I. B. C. thanks MICINN for funding through the Ramón y Cajal fellowship, grant ref. RYC2022-035399-I, and Dr Pablo Royo (UPC) for helping with the drone-assisted aerial inspection of the prototype. J. F. M.-G. thanks MICIN/AEI (MCIN/AEI/10.13039/501100011033) for grant PID2023-149395NB-I00 (ERDF/EU) to his laboratory.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Burgués Ceballos, Ignasi
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Organic photovoltaics as an agricultural protective cover: lessons learned from the first flexible agrivoltaic installation in a European apple orchard, Fotovoltaics orgànics com a cobertura protectora agrícola: lliçons apreses de la primera instal·lació d'agrovoltaica flexible en un camp de pomes europeu

  • Pinyol Castillo, Paula
  • Tijero, Verónica
  • Vidal Tur, Margalida
  • Martín-Ruiz, Martín
  • Nikolaidou, Katerina
  • Gibert-Roca, Martí
  • Molas, Sílvia
  • Martinez-Garcia, Jaume F.
  • Asín, Luís
  • Campoy Quiles, Mariano
  • Burgués Ceballos, Ignasi
Semitransparent organic photovoltaics (ST-OPV) offer a promising path toward lightweight and spectrally selective agrivoltaics. Yet, the number of reports in real openfield scenarios remains limited. In this interdisciplinary work, we develop an agricultural protective cover integrating flexible ST-OPV modules with tailored light absorption to favour the simultaneous production of energy and plants. First, we evaluate the suitability of the blend PTB7-Th:IEICO-4F:PC70BM for this application, obtaining a maximum light utilisation efficiency for plants (LUEP) of 4.5% in lab-scale devices. We then show the gradual upscaling of devices from opaque laboratory cells to industrially roll-to-roll manufactured large-area ST-OPV modules. The transition from opaque to semitransparent electrodes, and the shift from rigid devices to flexible modules using large-scale deposition techniques are identified as the main contributors to efficiency losses in the chosen OPV stack. Remarkably, we demonstrate the successful production of large-area ST-OPV modules (1925 cm², 3.7% PCE) with roll-to-roll slot-die coating. Preliminary greenhouse tests indicated minor effects on physiological parameters of adult plants. Then, a 22 m² prototype was installed over an experimental apple orchard, where outdoor stability tests revealed a progressive voltage loss, together with reliability limitations associated with the presence of hot-spots, soiling, and wind-induced structural failure. Despite these operational challenges, the prototype remained operational for 3.5 months, reducing ground temperature by ~10 °C, and showing no negative impact on key plant production yield nor fruit quality traits., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M. P. P.-C. is a fellow of Eurecat's “Vicente López” PhD grant. P. P.-C. is enrolled in the Doctoral Programme in Materials Science and Engineering at the Universitat Politècnica de Catalunya (UPC). I. B. C. thanks MICINN for funding through the Ramón y Cajal fellowship, grant ref. RYC2022-035399-I, and Dr Pablo Royo (UPC) for helping with the drone-assisted aerial inspection of the prototype. J. F. M.-G. thanks MICIN/AEI (MCIN/AEI/10.13039/501100011033) for grant PID2023-149395NB-I00 (ERDF/EU) to his laboratory., Postprint (author's final draft)