Pasar al contenido principal

ADECUANDO CELULAS SOLARES ORGANICAS PARA APLICACIONES ESPECIFICAS

PID2024-163010OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

High-throughput Thickness Gradient Screening Reveals Thickness and Light-intensity Dependent Efficiency in Indoor Organic Photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada-Cortés, Marián
  • Capella Guardià, Francesc Xavier
  • Casademont-Viñas, Miquel
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy-Quiles, Mariano
[Abstract]: Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends on the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50–450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl). Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (RP) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCC-Cl shows broad thickness tolerance (≈230–410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCC-Cl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (∼305 nm) and varying by ≈15% across all four spectra. Analysis of intensity- and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient RP. This work demonstrates a rapid screening method and highlights the importance of thickness- and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science, Innovation and University through the Agencia Estatal de Investigación (MCIN/AEI/10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (grant no. 101086805). FXCG acknowledges the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Increasing Polymer Molecular Weight Enables Low-Donor-Content, Efficient and Scalable Semitransparent Organic Solar Cells

  • Martín-Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Burgués-Ceballos, Ignasi
  • Campoy-Quiles, Mariano
[Abstract]: The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., AGAUR; 2021-SGR-00444
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Burgués Ceballos, Ignasi
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-throughput thickness gradient screening reveals thickness and light-intensity dependent efficiency in indoor organic photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada Cortés, Marián
  • Capella Guardià,Francesc Xavier
  • Casademont Viñas, Miquel
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy Quiles, Mariano
Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50-450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl).Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (R P ) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCCl shows broad thickness tolerance (≈230-410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCCl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (~305 nm) and varying by ≈15% across all four spectra. Analysis of intensity-and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient R P . This work demonstrates a rapid screening method and highlights the importance of thickness-and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/ AEI /10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr. Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr. Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (Grant No. 101086805)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards In-line Monitoring of the Microstructure of Organic Semiconductor Materials for Photovoltaic Applications via Spectroscopic Ellipsometry

  • Quesada Ramírez, Arianna
  • Wang, Rong
  • Lüerc, Larry
  • Brabec, Christoph J.
  • Campoy Quiles, Mariano
High-throughput (HT) and automated fabrication methodologies are transforming the development of thin film organic optoelectronic devices. Organic semiconductor materials typically exhibit morphology-dependent performance, and their integration into lab-scale automated systems and roll-to-roll workflows would benefit from non-destructive, rapid, and reliable characterization tools. Distinguishing vertical segregation and microstructural evolution during processing remains a major challenge for in-line quality control and materials screening. In this work, we evaluate the sensitivity of variable angle spectroscopic ellipsometry (VASE) as a fast and non-invasive technique to monitor vertical microstructure stratification in organic semiconductor thin films based on polymer donor/non-fullerene acceptor bilayers (BLs) using two common materials for photovoltaic applications. We deduce the optical properties of the reference materials using standard critical point and Tauc–Lorentz models and then analyze model BL samples with donor/acceptor interfaces before and after thermal annealing. The ellipsometric response suggests that the technique can distinguish with high accuracy sharp BL interfaces and vertically separated blends. The findings in this work demonstrate that VASE can serve as an effective HT diagnostic tool for tracking layer dynamics in automated fabrication environments, providing a valuable bridge between process control and device optimization., We acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities (No. MCIN/AEI/10.13039/501-100011033/) through the Spanish State Research Agency (AEI) through the Project No. PID2024-163010OB-I00 and through Severo Ochoa Centers of Excellence program (No. CEX2023-001263-S). The authors also want to thank CSIC for funding through intramural projects Nos. 202260E121 and 202560E238. R.W., L.L., and C.J.B. acknowledge funding by the DFG project “EXTRAORDINAIRE” No. 460766640. We thank Laura Rodríguez Domínguez from the AFM Service at the ICMAB for topography measurements and Digital Surf for the software MountainsMap® (www.mountainsmap.com). A.Q.-R. gratefully acknowledges the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona in which they are enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed