Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An electrically driven and readable molecular monolayer switch using a solid electrolyte

  • Marchante, Elena
  • Crivillers, Núria
  • Buhl, Moritz
  • Veciana, Jaume
  • Mas Torrent, Marta
The potential application of molecular switches as active elements in information storage has been demonstrated through numerous reported works. Importantly for devices, such switching capability has also been observed on self-assembled monolayers (SAMs). SAMs of electro-active molecules have been exploited in the last few years as electrochemical switches. Typically, the state of these switches could be read out through their optical and/or magnetic responses. These output reading processes are difficult to integrate into devices and in addition there is a need to use liquid environments to switch the redox-active molecular systems. Here, we overcome both these challenges using an ion-gel as electrolyte medium achieving an unprecedented solid state device based on a single molecular layer. Further, electrochemical impedance has been successfully exploited as the output of the system., We thank R. Pfattner for his help and F. J. del Campo for providing the silicon mold. We acknowledge the financial support of the EU projects ERC StG 2012-306826 e-GAMES, ITN iSwitch (GA no. 642196) and CIG (PCIG10-GA-2011-303989), the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) with project BE-WELL CTQ2013-40480-R and the Generalitat de Catalunya with project 2014-SGR-17. E. M. acknowledges the Materials Science PhD program of UAB and N.C the JdC program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-Induced Conductivity in a Neutral Nonplanar Spin- Localized Radical

  • Souto Salom, Manuel
  • Blasi, Davide
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
Souto, Manuel et al., There is a growing interest in the development of single-component molecular conductors based on neutral organic radicals that are mainly formed by delocalized planar radicals, such as phenalenyl or thiazolyl radicals. However, there are no examples of systems based on nonplanar and spin-localized C-centered radicals exhibiting electrical conductivity due to their large Coulomb energy (U) repulsion and narrow electronic bandwidth (W) that give rise to a Mott insulator behavior. Here we present a new type of nonplanar neutral radical conductor attained by linking a tetrathiafulvalene (TTF) donor unit to a neutral polychlorotriphenylmethyl radical (PTM) with the important feature that the TTF unit enhances the overlap between the radical molecules as a consequence of short intermolecular S···S interactions. This system becomes semiconducting upon the application of high pressure thanks to increased electronic bandwidth and charge reorganization opening the way to develop a new family of neutral radical conductors., This work was supported by the EU ITN iSwitch 642196 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014- SGR-17). This work has also been supported by MINECO through the projects CSD2007-00045, CTQ2012- 38599-C02- 02 and CTQ2013-48252-P. ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M.S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant and he is enrolled in the Material Science Ph.D. program of UAB. D.B. is grateful to the EC ITN Nano2fun grant no607721. M.P.A. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte for an FPU grant. M.P.A. and V.G.B. thank the project CTQ2015-67755-C2-1-R. H.O. Jeschke, M. Tomic and R. Valenti thank the Deutsche Forschungsgemeinschaft (DFG) for funding through grant SFB/TRR49 and Steve Winter for useful discussions. We thank Carlos Goḿ ez-Garcıá (Univ. Valencia) for SQUID measurements as well as Xavier Fontrodona (Univ. Girona) for X-ray diffraction measurements and Mercedes Taravillo (UCM) for the support provided during the high pressure Raman measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Donor/Acceptor Mixed Self-Assembled Monolayers for Realising a Multi-Redox-State Surface

  • Casado Montenegro, Javier
  • Marchante, Elena
  • Crivillers, Núria
  • Rovira, Concepció
  • Mas Torrent, Marta
Mixed molecular self-assembled monolayers (SAMs) on gold, based on two types of electroactive molecules, that is, electron-donor (ferrocene) and electron-acceptor (anthraquinone) molecules, are prepared as an approach to realise surfaces exhibiting multiple accessible redox states. The SAMs are investigated in different electrolyte media. The nature of these media has a strong impact on the types of redox processes that take place and on the redox potentials. Under optimised conditions, surfaces with three redox states are achieved. Such states are accessible in a relatively narrow potential window in which the SAMs on gold are stable. This communication elucidates the key challenges in fabricating bicomponent SAMs as electrochemical switches., We acknowledge the financial support of the EU projects ERC StG 2012-306826 e-GAMES, ITN iSwitch (GA no. 642196) CIG (PCIG10- GA-2011-303989), ACMOL (GA no. 618082), the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) with project BE-WELL CTQ2013- 40480-R and the Generalitat de Catalunya with project 2014- SGR-17. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). N.C acknowledges the RyC Program. J.C-M. and E.M. are enrolled in the Materials Science PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent Modification of Highly Ordered Pyrolytic Graphite withaStable OrganicFree Radical by UsingDiazonium Chemistry

  • Seber, Gonca
  • Rudnev, Alexander V.
  • Droghetti, Andrea
  • Rungger, Ivan
  • Veciana, Jaume
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Crivillers, Núria
A novel, persistent, electrochemically active perchlorinated triphenylmethyl (PTM) radical with a diazonium functionality has been covalently attached to highly ordered pyrolytic graphite (HOPG) by electrografting in a single-step process. Electrochemical scanning tunneling microscopy (EC-STM) and Raman spectroscopy measurements revealed that PTM molecules had a higher tendency to covalently react at the HOPG step edges. The cross-section profiles from EC-STM images showed that there was current enhancement at the functionalized areas, which could be explained by redox-mediated electron tunneling through surface-confined redox-active molecules. Cyclic voltammetry clearly demonstrated that the intrinsic properties of the organic radical were preserved upon grafting and DFT calculations also revealed that the magnetic character of the PTM radical was preserved., We acknowledgeGuillaume Sauthier from the Ca talan Ins tituteof Nanoscience and Nanotechnology (ICN2) for XPS measure-ments.This work was supported by ACMOL (GA no. 618082),the Swiss National Science Foundation (grant no. 200020-144471), ERC StG 2012-306826 e-GAMES,ITN iSwitch (642196)project, the Networking Research Center of Bioengineering,Biomaterials and Nanomedicine(CIBER-BBN), the DGI (Spain)with project BE-WELL CTQ2013-40480-R, and the Generalitatde Catalunya with project 2014-SGR-17. N.C acknowledges theRyC program. We also acknowledge financial suppo rt from theSpanishMinistry of Economyand Competitiveness, throughthe “Severo Ochoa” Programme for Centres of Excellence inR&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the Influence of the Electronic Structure on the Crystal Structure of a TTF-PTM Radical Dyad

  • Vela Llausi, Sergi
  • Souto Salom, Manuel
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
The understanding of the crystal structure of organic compounds, and its relationship to their physical properties, have become essential to design new advanced molecular materials. In this context, we present a computational study devoted to rationalize the different crystal packing displayed by two closely related organic systems based on the TTF-PTM dyad (TTF = tetrathiafulvalene, PTM = polychlorotriphenylmethane) with almost the same molecular structure but a different electronic one. The radical species (1), with an enhanced electronic donor–acceptor character, exhibits a herringbone packing, whereas the nonradical protonated analogue (2) is organized forming dimers. The stability of the possible polymorphs is analyzed in terms of the cohesion energy of the unit cell, intermolecular interactions between pairs, and molecular flexibility of the dyad molecules. It is observed that the higher electron delocalization in radical compound 1 has a direct influence on the geometry of the molecule, which seems to dictate its preferential crystal structure., This work was supported by the DGI grant (CTQ2013- 40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the EU ITN iSwitch 642196, the NANO2FUN Project No. 607721 and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). S.V. is thankful to the LabEx-Chemistry of Complex Systems for a post-doctoral grant (ANR-10-LABX-0026CSC) and to the regional High-Performance Computing (HPC) center in Strasbourg for computational resources. M.S. is enrolled in the Material Science Ph.D. program of UAB and is grateful to MEC for a FPU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A redox-active radical as an effective nanoelectronic component: stability and electrochemical tunnelling spectroscopy in ionic liquids

  • Rudnev, Alexander V.
  • Franco, Carlos
  • Crivillers, Núria
  • Seber, Gonca
  • Droghetti, Andrea
  • Rungger, Ivan
  • Pobelov, Ilya V.
  • Veciana, Jaume
  • Mas Torrent, Marta
  • Rovira, Concepció
A redox-active persistent perchlorotriphenylmethyl (PTM) radical chemically linked to gold exhibits stable electrochemical activity in ionic liquids. Electrochemical tunnelling spectroscopy in this medium demonstrates that the PTM radical shows a highly effective redox-mediated current enhancement, demonstrating its applicability as an active nanometer-scale electronic component., We acknowledge the financial support from the EU projects ACMOL (FET Young Explorers, GA no. 618082), ERC StG 2012- 306826 e-GAMES, ITN iSwitch (GA no. 642196), COST Action TD1002, the Swiss National Science Foundation (Grant No. 200020- 144471), the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) with project BE-WELL CTQ2013-40480-R, the Generalitat de Catalunya with project 2014-SGR-17, and the Severo Ochoa program. N. C acknowledges the RyC program. C. F. is enrolled in the Materials Science PhD program of UAB., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A surface confined yttrium(III) bis-phthalocyaninato complex: a colourful switch controlled by electrons

  • Alcón, Isaac
  • Gonidec, Mathieu
  • Ajayakumar, Murugan
  • Mas Torrent, Marta
  • Veciana, Jaume
AMs of a Y(III) double-decker complex on ITO have been prepared and their electrical and optical properties explored, exhibiting three accessible stable redox states with characteristic absorption bands in the visible spectra, corresponding to three complementary colors (i.e., green, blue and red). These absorption bands are exploited as output signals of this robust ternary electrochemical switch, behaving hence as an electrochromic molecular-based device., This work was funded by ERC StG 2012-306826 e-GAMES, the EU project ITN iSwitch (GA no. 642196), the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), DGI (Spain) BE-WELL CTQ2013-40480-R, and Generalitat de Catalunya 2014-SGR-17. I. A. acknowledges CIBER-BBN for a grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical control over the energy-level alignment in a two-terminal junction

  • Li, Yuan
  • Franco, Carlos
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Liang, Cao
  • Suchand Sangeeth, C.S.
  • Rovira, Concepció
  • Veciana, Jaume
  • Nijhuis, Christian A.
The energy-level alignment of molecular transistors can be controlled by external gating to move molecular orbitals with respect to the Fermi levels of the source and drain electrodes. Two-terminal molecular tunnelling junctions, however, lack a gate electrode and suffer from Fermi-level pinning, making it difficult to control the energy-level alignment of the system. Here we report an enhancement of 2 orders of magnitude of the tunnelling current in a two-terminal junction via chemical molecular orbital control, changing chemically the molecular component between a stable radical and its non-radical form without altering the supramolecular structure of the junction. Our findings demonstrate that the energy-level alignment in self-assembled monolayer-based junctions can be regulated by purely chemical modifications, which seems an attractive alternative to control the electrical properties of two-terminal junctions., The National Research Foundation, Prime Minister’s Office, Singapore under its Medium sized centre programme, and for the NRF fellowship to C.A.N., award No. NRF-RF 2010-03, is kindly acknowledged for supporting this research. C.F., N.C., M.M.-T., C.R. and J.V. acknowledge the CSIC funded i-LINK0841project, the EU FP7 program through ACMOL collaborative project (GA n 618082), ERC StG 2012-306826 e-GAMES, CIG (PCIG10-GA-2011-303989) and ITN iSwitch (GA no. 642196), the financial support from the DGI (Spain) (CTQ2013-40480-R), Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2014SGR-17) and the Networking Research Center of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN); N.C. acknowledges the RyC program; C.F. is enroled in the Materials Science PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of Ethylenedithio-MPTTF-PTM Radical Dyad as a Potential Neutral Radical Conductor

  • Souto Salom, Manuel
  • Bendixen, Dan
  • Jensen, Morten
  • Díez Cabanes, Valentín
  • Cornil, Jérôme
  • Jeppesen, Jan O.
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
During the last years there has been a high interest in the development of new purely-organic single-component conductors. Very recently, we have reported a new neutral radical conductor based on the perchlorotriphenylmethyl (PTM) radical moiety linked to a monopyrrolotetrathiafulvalene (MPTTF) unit by a π-conjugated bridge (1) that behaves as a semiconductor under high pressure. With the aim of developing a new material with improved conducting properties, we have designed and synthesized the radical dyad 2 which was functionalized with an ethylenedithio (EDT) group in order to improve the intermolecular interactions of the tetrathiafulvalene (TTF) subunits. The physical properties of the new radical dyad 2 were studied in detail in solution to further analyze its electronic structure., This work was supported by the EU ITN iSwitch 642196 and “Nano2Fun” 607721 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). In Denmark, this work was supported by the Danish Council for Independent Research | Natural Sciences (#11-106744). M.S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant. We thank Vega Lloveras for ESR spectroscopy and Amable Bernabé for MALDI spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TTF–PTM dyads: from switched molecular self assembly in solution to radical conductors in solid state

  • Souto Salom, Manuel
  • Rovira, Concepció
  • Ratera, Immaculada
  • Veciana, Jaume
Organic donor-acceptor (D-A) systems formed by the electron-donor tetrathiafulvalene (TTF) linked to the electron-acceptor polychlorotriphenylmethyl (PTM) radical through different π-conjugated bridges exhibit interesting physical properties such as bistability in solution or conductivity in solid state. Understanding the interplay between intra- and intermolecular charge transfer processes in solution is of high interest in order to rationalize the self-assembling ability and conducting properties of such dyads in solid state. In this Highlight we go over the self-assembling properties of different TTF-π-PTM radical dyads that find potential applications as molecular switches or conductors in the field of molecular electronics., This work was supported by the EU Training Networks (ITN) “iSwitch” (GA No. 642196) and ‘‘NANO2FUN’’ (GA No. 607721) DGI (Spain) grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014- SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M. S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant and he is enrolled in the Material Science Ph.D. program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Rectification Ratio by Changing the Electronic Nature (Open-Shell and Closed-Shell) in Donor–Acceptor Self-Assembled Monolayers

  • Souto Salom, Manuel
  • Li, Yuan
  • Morales, Dayana C.
  • Li, Jiang
  • Ratera, Immaculada
  • Nijhuis, Christian A.
  • Veciana, Jaume
This Communication describes the mechanism of charge transport across self-assembled monolayers (SAMs) of two donor–acceptor systems consisting of a polychlorotriphenylmethyl (PTM) electron-acceptor moiety linked to an electron-donor ferrocene (Fc) unit supported by ultraflat template-stripped Au and contacted by a eutectic alloy of gallium and indium top contacts. The electronic and supramolecular structures of these SAMs were well characterized. The PTM unit can be switched between the nonradical and radical forms, which influences the rectification behavior of the junction. Junctions with nonradical units rectify currents via the highest occupied molecular orbital (HOMO) with a rectification ratio R = 99, but junctions with radical units have a new accessible state, a single-unoccupied molecular orbital (SUMO), which turns rectification off and drops R to 6., This work was supported by the EU ITN iSwitch 642196 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014-SGR-17). ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Pro-gramme for Centres of Excellence in R&D (SEV- 2015-0496). Prime Minister’s Office, Singapore under its Medium sized centre program is also acknowledged for supporting this research. Yu Xiaojiang is kindly acknowledged for assisting at the SINS beam line at SSLS under NUS core support C-380-003-003-001. We also acknowledge the Ministry of Education (MOE) for supporting this research under award No. MOE2015-T2-1-050., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon-rich monolayers on ITO as highly sensitive platforms for detecting polycyclic aromatic hydrocarbons in water: The case of pyrene

  • Muñoz Martín, José M.
  • Crivillers, Núria
  • Mas Torrent, Marta
The determination of polycyclic aromatic hydrocarbons (PAHs) in water at low levels is a current challenge given their great impact on the health and safety of the public. Here, a novel pyrene-based self-assembled monolayer (SAM) platform is exploited as PAH sensing recognition device. Interestingly, the formation of π-π sandwich complexes between PAHs and the recognition element switches the surface electron transfer capability. The unique supramolecular interaction between identical aromatic molecules provides a highly sensitive and selective sensor for pyrene in the order of part per trillion. Accordingly, and using pyrene as a proof-of-concept, this work presents the basis for an 'at-point-of-use' impedimetric sensor focused on a highly sensitive carbon-based SAM for PAHs determination in water at ultra-trace levels., This work was funded by the ERC StG 2012-306826 e-GAMES. The authors also thank the ITN iSwitch 642196 project, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the DGI (Spain) project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluid Mixing for Low-Power ‘Digital Microfluidics’ Using Electroactive Molecular Monolayers

  • Maglione, Maria Serena
  • Casalini, Stefano
  • Georgakopoulos, Stamatis
  • Barbalinardo, Marianna
  • Parkula, Vitaliy
  • Crivillers, Núria
  • Rovira, Concepció
  • Greco, Pierpaolo
  • Mas Torrent, Marta
A switchable electrode, which relies on an indium-tin oxide conductive substrate coated with a self-assembled monolayer terminated with an anthraquinone group (AQ), is reported as an electrowetting system. AQ electrochemical features confer the capability of yielding a significant modulation of surface wettability as high as 26° when its redox state is switched. Hence, an array of planar electrodes for droplets actuation is fabricated and integrated in a microfluidic device to perform mixing and dispensing on sub-nanoliter scale. Vehiculation of cells across microfluidic compartments is made possible by taking full advantage of surface electrowetting in culture medium., This work was funded by the innovative training networks (ITN) iSwitch 642196, European research council (ERC) StG 2012-306826 e-GAMES, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Spanish Ministry project FANCY CTQ2016-80030-R, the Generalitat de Catalunya (2014-SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). M.S.M. is enrolled in the Materials Science PhD Program of Universitat Autònoma de Barcelona. S.C. acknowledges the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007–2013) under Research Executive Agency Grant Agreement No. 600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tetrathiafulvalene–Polychlorotriphenylmethyl Dyads: Influence of Bridge and Open-Shell Characteristics on Linear and Nonlinear Optical Properties

  • Souto Salom, Manuel
  • Calbo, Joaquín
  • Ratera, Immaculada
  • Ortí, Enrique
  • Veciana, Jaume
Three conjugated donor-π-acceptor radical systems (1 a–1 c) were prepared by bridging a tetrathiafulvalene (TTF) electron-donor unit to a polychlorotriphenylmethyl (PTM) electron-acceptor radical through vinylene units of different lengths. The dependence of the intramolecular charge transfer on the length of the conjugated bridge has been analyzed by different electrochemical and spectroscopic techniques. Linear optical properties and the second-order nonlinear optical (NLO) response of these derivatives have been computed by comparing systems 1 a–1 c with the non-radical analogues (2 a–2 c). Interestingly, an enhanced NLO response is predicted for dyads 1 a–1 c with PTM in the radical form and for compounds with longer vinylene bridges. Calculations confirm the active role the bridge plays for electronic communication between the donor TTF and the acceptor PTM units., This work was supported by the EU TrainingNetwork (ITN) “iS-witch” (GA No. 642196), the Spanish Ministry of EconomyandCompetitiveness MINECO (projects CTQ2013-40480-R andCTQ2015-71154-P), the Networking Research CenteronBioen-gineering, Biomaterials, and Nano- medici ne (CIBER-BBN), theGeneralitat de Catalunya (grant 2014-SGR-17), the Generalitat Valenciana (PROMETEO/2016/135) and European Feder funds(CTQ2015-71154-P). ICMAB acknowledges support from theMINECOthrough the “Severo Ochoa” Programme for Centresof Excellence in R&D (SEV-2015-0496). ICMol thanks theMINECOfor the Unidad de Excelencia Mar&adeMaeztu MDM-2015-0538. M.S. and J.C. are grateful to MECD of Spain for FPUpredoctoral grants.Wethank Amable Bernab8 for MALD Ispec-troscopy and Vega Lloveras for ESR spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of the E–Z stilbene isomerisation in perchlorotriphenyl-methane (PTM) derivatives

  • Bejarano, Francesc
  • Alcón, Isaac
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Bromley, Stefan T.
  • Veciana, Jaume
  • Rovira, Concepció
The E–Z isomerisation of two perchlorotriphenylmethane derivatives containing stilbene units has been investigated, both thermally and photochemically. The irreversibility of the E / Z isomerisation in both compounds is experimentally demonstrated and supported by density functional calculations., We thank Carlos Franco for his help with the HPLC analysis and Amable Bernab´e CTQ2016-80030-R for the MALDI-ToF characterizations. We thank the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN); DGI (Spain) with projects BE-WELL CTQ2013-40480-R and MAT2012-30924, and Generalitat de Catalunya (grant 2009SGR00516, 2014SGR97 and XRQTC). We also thank the EU projects ERC StG 2012-306826 e-GAMES, ITN iSwitch (GA no. 642196), ACMOL (GA no. 618082) and CIG-ELECTROMAGIC (PCIG10-GA-2011-303989). Spanish Ministry of Economy and Competitiveness, through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496). N. C. thanks the RyC contract. F. B. acknowledges the FPU fellowship. F. B. is enrolled in the Materials Science PhD program of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A four-state capacitance molecular switch based on a redox active tetrathiafulvalene self-assembled monolayer

  • Marchante, Elena
  • Maglione, Maria Serena
  • Crivillers, Núria
  • Rovira, Concepció
  • Mas Torrent, Marta
An electroactive tetrathiafulvalene (TTF) self-assembled monolayer (SAM) on gold has been prepared and fully characterised by electrochemical impedance spectroscopy. Transfer rates of the same order were found for the two redox processes. Remarkably, the TTF SAM was successfully exploited as a 4-state electrochemical switch using the capacitance of the SAM as output signal., We acknowledge nancial support from the EU (projects ERC StG 2012-306826 e-GAMES and ITN iSwitch 642196), the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), the DGI (Spain) project BEWELL CTQ2013-40480-R, the Generalitat de Catalunya (2014- SGR-17) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). E. M. and M. S. M. are enrolled in the Materials Science PhD program of the UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct covalent grafting of an organic radical core on gold and silver

  • Ajayakumar, Murugan
  • Alcón, Isaac
  • Bromley, Stefan T.
  • Veciana, Jaume
  • Rovira, Concepció
  • Mas Torrent, Marta
The functionalisation of surfaces with organic radicals, such as perchlorotriphenylmethyl (PTM) radicals or tris(2,4,6-trichloro-phenyl)methyl (TTM) radicals, is appealing for the development of molecular spintronic devices. Conventionally, organic radicals are chemisorbed to metal substrates by using long alkyl or aromatic spacers resulting in a weak spin–electron coupling between the radical and the substrate. To circumvent this problem, here we have employed a new design strategy for the fabrication of radical self-assembled monolayers (r-SAMs). This newly designed radical–anchor (R–A) molecule, a TTM based radical disulfide (1), can be easily synthesized and it was here characterized by electron spin resonance (ESR), cyclic voltammetry (CV) and superconducting quantum interference device magnetometry (SQUID). We have succeeded in fabricating TTM based r-SAMs by using thiolate bonds (Au–S and Ag–S) where the TTM cores are only one-atom distance from the metal surface for the first time. The resultant robust 1/Au and 1/Ag r-SAMs were well characterized, and the electrochemical and the magnetic properties were unambiguously confirmed, proving the persistence of the molecular spin., This work was funded by ERC StG 2012-306826 e-GAMES. The authors also thank ITN iSwitch 642196 project, the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), DGI (Spain) BE-WELL CTQ2013-40480- R and FANCY CTQ2016-80030-R, and Generalitat de Catalunya 2014-SGR-17. The authors also acknowledge the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015- 0496). We thank Dr V. Lloveras for ESR spectroscopy characterization, Mr A. Bernab´e for MALDI-TOF measurements and Dr G. Sauthier from ICN2 for XPS and UPS measurements. We also thank Dr N. Crivillers for useful discussions. S. T. B. and I. A. acknowledge support from the Spanish MINECO grant CTQ2015-64618-R grant and, in part, by Generalitat de Catalunya grants 2014SGR97 and XRQTC. IA acknowledges the Spanish Ministerio de Educaci´on Cultura y Deporte for a FPU PhD scholarship. Access to supercomputer resources as provided through grants from the Red Espanola de Supercomputación is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-Induced Gating of the Exchange Interactions in a Single Organic Diradical

  • Gaudenzi, Rocco
  • Bruijckere, Joeri de
  • Reta, Daniel
  • Moreira, Ibério de P. R.
  • Rovira, Concepció
  • Veciana, Jaume
  • Zant, Herre S. J. van der
  • Burzurí, Enrique
Embedding a magnetic electroactive molecule in a three-terminal junction allows for the fast and local electric field control of magnetic properties desirable in spintronic devices and quantum gates. Here, we provide an example of this control through the reversible and stable charging of a single all-organic neutral diradical molecule. By means of inelastic electron tunnel spectroscopy we show that the added electron occupies a molecular orbital distinct from those containing the two radical electrons, forming a spin system with three antiferromagnetically coupled spins. Changing the redox state of the molecule therefore switches on and off a parallel exchange path between the two radical spins through the added electron. This electrically controlled gating of the intramolecular magnetic interactions constitutes an essential ingredient of a single-molecule quantum gate., We acknowledge financial support by the Dutch Organization for Fundamental Research (NWO/FOM), an advanced ERC grant (Mols@Mols), and The Netherlands Organisation for Scientific Research (NWO/OCW) as part of the Frontiers of Nanoscience program. E.B. acknowledges funds from the EU FP7 program through Project 618082 ACMOL and a NWOVENI fellowship. C.R. and J.V. are thankful for funds from Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), MINECO, Spain (CTQ2013-40480-R, CTQ 2016-80030-R, and ”Severo Ochoa” Programme for Centers of Excellence in R&D, SEV2015-0496), MCSA ITN Network i-Switch (GA 642196), and Generalitat de Catalunya (2014-SGR-17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemically driven host–guest interactions on patterned donor/acceptor self-assembled monolayers

  • Maglione, Maria Serena
  • Casado Montenegro, Javier
  • Fritz, Eva Corinna
  • Crivillers, Núria
  • Ravoo, Bart Jan
  • Rovira, Concepció
  • Mas Torrent, Marta
Here, on ITO//Au patterned substrates SAMs of ferrocene (Fc) on the Au regions and of anthraquinone (AQ) on the ITO areas are prepared, exhibiting three stable redox states. Furthermore, by selectively oxidizing or reducing the Fc or AQ units, respectively, the surface properties are locally modified. As a proof-of-concept, such a confinement of the properties is exploited to locally form host–guest complexes with b-cyclodextrin on specific surface regions depending on the applied voltage., This work was funded by ERC StG 2012-306826 e-GAMES, ITN iSwitch 642196, Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), the Generalitat de Catalunya (2017-SGR-918) and the Spanish Ministry of Economy and Competitiveness, through the FANCY CTQ2016-80030-R project and the ‘‘Severo Ochoa’’ Programme for Centers of Excellence in R&D (SEV-2015-0496). M. S. M. is enrolled in the Materials Science PhD Program of UAB. E. C. F. and B. J. R. are grateful for support by the Deutsche Forschungsgemeinschaft (SFB 858)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the Open‐Shell Character on the Pressure‐Induced Conductivity of an Organic Donor–Acceptor Radical Dyad

  • Souto Salom, Manuel
  • Gullo, Maria Chiara
  • Cui, HengBo
  • Casati, Nicola
  • Montisci, Fabio
  • Jeschke, Harald O.
  • Valentí, Roser
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
Single‐component conductors based on neutral organic radicals have received a lot of attention due to the possibility that the unpaired electron can serve as a charge carrier without the need of a previous doping process. Although most of these systems are based on delocalized planar radicals, we present here a nonplanar and spin localized radical based on a tetrathiafulvalene (TTF) moiety, linked to a perchlorotriphenylmethyl (PTM) radical by a conjugated bridge, which exhibits a semiconducting behavior upon application of high pressure. The synthesis, electronic properties, and crystal structure of this neutral radical TTF‐Ph‐PTM derivative (1) are reported and implications of its crystalline structure on its electrical properties are discussed. On the other hand, the non‐radical derivative (2), which is isostructural with the radical 1, shows an insulating behavior at all measured pressures. The different electronic structures of these two isostructural systems have a direct influence on the conducting properties, as demonstrated by band structure DFT calculations., This work was supported the Spanish MINECO/FEDER grants(“Mother”;MAT 2016–80826-R and “Fancy”;CTQ 2016–80030-R), the Networking Research Center on Bioengineering, Bioma-terials,and Nanomedicine (CIBER-BBN), and the AGAU R, Gener-alitat de Catalunya (grant 2014-SGR-17), by the EU Marie CurieITN iSwitch (grant642196) and by Swiss National ScienceFoundation, project200020_162861. ICMAB is supported bythe Spanish MinistryofEconomyand Competitiveness,through the “SeveroOchoa”Programme for Centres of Excel-lence in R&D (SEV-2015-0496 ). M.S. is grateful to Spanish Min-isterio de Educacijn, Cultura yDeporte for aFPU. H.O.J. andR.V.thank the Deutsche Forschungsgemeinschaft (DFG) forfundingthrough grant SFB/TRR49 and Steve Winterfor usefuldiscussions. We thank Xavier Fontrodona (Univ.Girona) forsingle-crystal X-ray diffractionmeasurements. We also thankAmable Bernab8 and Vega Lloveras(ICMAB-CSIC) for MALDIand ESR spectroscopy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Molecular Polarizability of SAMs on the Work Function Modification of Gold: Closed‐ versus Open‐Shell Donor–Acceptor SAMs

  • Díez Cabanes, Valentín
  • Morales, Dayana C.
  • Souto Salom, Manuel
  • Paradinas, Markos
  • Delchiaro, Francesca
  • Painelli, Anna
  • Ocal, Carmen
  • Cornil, David
  • Cornil, Jérôme
  • Veciana, Jaume
  • Ratera, Immaculada
Charge injection barriers at metal/organic interfaces can be tuned by modifying the work function of metallic electrodes using self‐assembled monolayers (SAMs) of polar molecules. An interesting example of polar molecules is offered by donor–acceptor (D–A) dyads based on ferrocene (Fc) as electron‐donor unit and either a polychlorotriphenylmethyl radical or a polychlorotriphenylmethane as electron‐acceptor units, connected by a π‐conjugated vinylene bridge. The D–A radical exhibits high chemical and thermal stability and presents different electronic, optical, and magnetic properties with respect to the closed‐shell form. The magnitude of the shift in the charge injection barriers for these two D–A systems is estimated by means of surface potential measurements performed by Kelvin probe force microscopy. The experimental data are compared with density functional theory calculations, which evidence the importance of the molecular dipole moments and polarizabilities to understand the experimental values. In order to achieve high work function shifts of metals upon SAM formation, the molecules forming the SAM have to exhibit both a high permanent dipole moment and a low polarizability along the direction normal to the substrate. In presence of polarizable molecules, the work function shifts can be enhanced by reducing the intermolecular interactions; by using mixed SAMs with active molecules embedded into a passive matrix., This work was financially supported by the EC through the Marie Curie project ITN iSwitch (Grant Agreement No. 642196). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.‐FNRS) under Grant No. 2.5020.11. J.C. is an FNRS research director. The authors also acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER‐BBN), an initiative funded by the VI National R&D&I Plan 2008e2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also appreciate the financial support through projects: BE‐WELL (CTQ2013e40480‐R), FANCY (CTQ2016‐80030‐R), MOTHER (MAT2016‐80826‐R), and OPTIMODE (MAT2016‐77852‐C2‐1‐R), granted by DGI (Spain), GenCat (2017‐SGR‐918 and 2017‐SGR‐668), financed by DGR (Catalunya), and Severo Ochoa Program Grant No. SEV‐2015‐0496, financed by Mineico (Spain). M.P. thanks the Spanish Government for financial support through BES‐2008‐003588 FPI and PTA2014‐09788‐I fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the donor unit on the rectification ratio in tunnel junctions based on donor– acceptor SAMs using PTM units as acceptors

  • Souto Salom, Manuel
  • Díez Cabanes, Valentín
  • Yuan, Li
  • Kyvik Ruiz, Adriana
  • Ratera, Immaculada
  • Nijhuis, Christian A.
  • Corni, Jerome
  • Veciana, Jaume
Dyads formed by an electron donor unit (D) covalently linked to an electron acceptor (A) by an organic bridge are promising materials as molecular rectifiers. Very recently, we have reported the charge transport measurements across self-assembled monolayers (SAMs) of two D–A systems consisting of the ferrocene (Fc) electron-donor linked to a polychlorotriphenylmethane (PTM) electron-acceptor in its non-radical (SAM 1) and radical (SAM 2) forms. Interestingly, we observed that the non-radical SAM 1 showed rectification behavior of 2 orders of magnitude higher than its radical analogue dyad 2. In order to study the influence of the donor unit on the transport properties, we report herein the synthesis and characterization of two new D–A SAMs in which the electron-donor Fc unit is replaced by a tetrathiafulvalene (TTF) moiety linked to the PTM unit in its non-radical (SAM 3) and radical (SAM 4) forms. The observed decrease in the rectification ratio and increased current density for TTF-PTM based SAMs 3 and 4 in comparison to Fc-PTM based SAMs 1 and 2 are explained, supported by theoretical calculations, by significant changes in the electronic and supramolecular structures., This work was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196), the projects: MOTHER (MAT2016-80826-R), granted by DGI (Spain), GenCat (2017-SGR 918), financed by DGR (Catalunya), and Severo Ochoa Program, Grant SEV-2015-0496 financed by MINECO (Spain). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J.C. is an FNRS research director. Authors also acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by the VI National R&D&I Plan 2008e2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. We also acknowledge the Ministry of Education (MOE) of Singapore for supporting this research under award No. MOE2015-T2-2-134., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A tool box to ascertain the nature of doping and photoresponse in single-walled carbon nanotubes

  • Santidrián, Ana
  • González Domínguez, José Miguel
  • Díez-Cabanes, Valentín
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Cornil, Jérôme
  • Ros, Tatiana da
  • Kalbáč, Martin
6 Figuras. 3 Tablas., The effect of doping on the electronic properties in bulk single-walled carbon nanotube (SWCNT) samples is studied for the first time using a new in situ Raman spectroelectrochemical method, and further verified by DFT calculations and photoresponse. We use p-/n-doped SWCNTs prepared by diazonium reactions as a versatile chemical strategy to control the SWCNT behavior. The measured and calculated data testify an acceptor effect of 4-aminobenzenesulfonic acid (p-doping), and a donor effect (n-doping) in the case of benzyl alcohol. In addition, pristine and covalently functionalized SWCNTs were used for the preparation of photoactive film electrodes. The photocathodic current in the photoelectrochemical cell is consistently modulated by the doping group. These results validate the in situ Raman spectroelectrochemistry as a unique tool box for predicting the electronic properties of functionalized SWCNTs in the form of thin films and their operational functionality in thin film devices for future optoelectronic applications., The authors acknowledge financial support from the European Union FP7 RADDEL programme (ITN Marie Curie Actions PEOPLE-2011-290023) and the MEYS Inter Excellence Project no. LTC18039 and H2020-MSCA RISE Agreement no. 734834 (INFUSION). This work at the Instituto de Carboquímica has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragon (T03-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 ‘Enabling Excellence’). The work in Mons is supported by the European Union H2020 iSwitch programme (H2020-MSCA-ITN-2014-ETN 642196). Computational resources in Mons were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J. C. is an FNRS research director. The authors acknowledge the assistance provided by the Research Infrastructures NanoEnviCz (Project No. LM2015073) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the project Pro-NanoEnviCz (Reg. no. CZ.02.1.01/0.0/0.0/16_013/0001821) supported by the Ministry of Education, Youth and Sports of the Czech Republic and the European Union – European Structural and Investments Funds in the frame of Operational Programme Research Development and Education. J. M. G.-D. is grateful to Spanish Ministry of Science, Innovation and Universities for his ‘Juan de la Cierva – Incorporación’ research grant. A. S. is grateful to Dr Sara Costa and Dr Johan Ek Weis for fruitful discussions and helpful comments., We also acknowledge institutional support from the Unit of Information Resources for Research at the "Consejo Superior de Investigaciones Científicas" (CSIC) for the article-processing charges contribution, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of Perchlorotriphenylmethyl (PTM) Radical-BasedCompounds for Optoelectronic Applications: The Role ofOrbital Delocalization

  • Díez Cabanes, Valentín
  • Seber, Gonca
  • Franco, Carlos
  • Bejarano, Francesc
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Veciana, Jaume
  • Rovira, Concepció
  • Cornil, Jérôme
Perchlorotriphenylmethyl (PTM) radical‐based compounds are widely exploited as molecular switching units. However, their application in optoelectronics is limited by the fact that they exhibit intense absorption bands only in a narrow range of the UV region around 385 nm. Recent experimental works have reported new PTM based compounds which present a broad absorption in the visible region although the origin of this behavior is not fully explained. In this context, Time‐Dependent Density Functional Theory (TD‐DFT) calculations have been performed to rationalize the optical properties of these compounds. Moreover, a new compound based on PTM disubstituted with bistriazene units has been synthetized and characterized to complete the set of available experimental data on related compounds. The results point to the delocalization of the Highest Occupied Molecular Orbital (HOMO) of the substituents along the PTM core as the origin of the new high absorption bands in the visible region. As a consequence, the absorption of the PTM‐based compounds can be tuned via the choice of the nature of the donor substituent, type of connection, and number of substituents., This work was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196) and the Belgian National Fund for Scientific Research (FNRS). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.‐FNRS) under Grant 2.5020.11. J.C. is an FNRS research director. Authors also acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER”, the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER‐BBN), an initiative funded by the VI National R&D&I Plan 2008e2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also appreciate the financial support through projects: FANCY (CTQ2016‐80030‐R), and MOTHER (MAT2016‐80826‐R), granted by DGI (Spain), GenCat (2017‐SGR‐918), financed by DGR (Catalunya), and Severo Ochoa Program Grant SEV‐2015‐0496, financed by Mineco (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Collective molecular switching in hybrid superlattices for light-modulated two-dimensional electronics

  • Gobbi, Marco
  • Bonacchi, Sara
  • Lian, Jian X.
  • Vercouter, Alexandre
  • Bertolazzi, Simone
  • Zyska, Björn
  • Timpel, Melanie
  • Tatti, Roberta
  • Olivier, Yoann
  • Hecht, Stefan
  • Nardi, Marco V.
  • Beljonne, David
  • Orgiu, Emanuele
  • Samorì, Paolo
Molecular switches enable the fabrication of multifunctional devices in which an electrical output can be modulated by external stimuli. The working mechanism of these devices is often hard to prove, since the molecular switching events are only indirectly confirmed through electrical characterization, without real-space visualization. Here, we show how photochromic molecules self-assembled on graphene and MoS generate atomically precise superlattices in which a light-induced structural reorganization enables precise control over local charge carrier density in high-performance devices. By combining different experimental and theoretical approaches, we achieve exquisite control over events taking place from the molecular level to the device scale. Unique device functionalities are demonstrated, including the use of spatially confined light irradiation to define reversible lateral heterojunctions between areas possessing different doping levels. Molecular assembly and light-induced doping are analogous for graphene and MoS, demonstrating the generality of our approach to optically manipulate the electrical output of multi-responsive hybrid devices., We acknowledge funding from the European Commission through the Graphene Flagship (GA-785219), the Marie Sklodowska-Curie projects ITN project iSwitch (GA-642196) and IEF GALACTIC (PIEF-GA-2014-628563), and SUPER2D (GA-748971), the M-ERA.NET project MODIGLIANI, the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), and the International Center for Frontier Research in Chemistry (icFRC) as well as the German Research Foundation (via SFB 765 and SFB 951). D.B. is a FNRS research director. M.V.N. and M.T. gratefully acknowledge the support by the CARITRO Foundation, (project MILA) Trento (Italy)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

EGOFET Gated by a Molecular Electronic Switch: A Single‐Device Memory Cell

  • Parkula, Vitaliy
  • Maglione, Maria Serena
  • Casalini, Stefano
  • Qiaoming, Zhang
  • Greco, Pierpaolo
  • Bortolotti, Carlo Augusto
  • Rovira, Concepció
  • Mas Torrent, Marta
  • Biscarini, Fabio
Electrolyte‐gated organic field‐effect transistors (EGOFETs) exploit the transduction of interfacial phenomena, such as biorecognition or redox processes, into detectable changes of electrical response. Here, it is shown that, beyond sensing applications, EGOFETs may act effectively as memory devices, through the functionalization of the gate electrode with a self‐assembly monolayer comprising a switching molecule undergoing a large and persistent change of dipole moment, upon application of a small (0.6 V) programming potential. This first example of a switchable EGOFET device with memory retention is based on a tetrathiafulvalene derivative self‐assembled on gold and an aqueous buffer as electrolyte in a microfluidic assembly. Changes of the self‐assembled monolayer redox state lead to variations of the gate electrochemical potential and, as a consequence, the EGOFET's threshold voltage undergoes reversible shifts larger than 100 mV. The distinctive electrical readout upon different redox states opens the possibility of writing and erasing information, thus making the transistor behave as a single memory cell., This work was funded by ITN iSwitch 642196 (V.P. and M.S.M.), ERC StG 2012‐306826 e‐GAMES, the EuroNanoMed III project “AMI,” the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER‐BBN), the Generalitat de Catalunya (2017‐SGR‐918) and the Spanish Ministry of Economy and Competitiveness, through the project FANCYCTQ2016‐80030‐R and “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496). V.P. is enrolled in the Molecular and Regenerative Medicine Programme of the Università di Modena and Reggio Emilia. M.S.M. and Q.Z. are enrolled in the Materials Science PhD Program of Universitat Autònoma de Barcelona. S.C. acknowledges the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007‐2013) under Research Executive Agency Grant Agreement No. 600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ. Q.Z. acknowledges the China Scholarship Council, the National Natural Science Foundation (NSF) of China (11404266) and the Fundamental Research Funds for the Central Universities (Grant No. XDJK2011C041)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversible switching of the Au(111) work function by near infrared irradiation with a bistable SAM based on a radical donor–acceptor dyad

  • Díez Cabanes, Valentín
  • Gómez Rodríguez, Andrés
  • Souto Salom, Manuel
  • Gonzalez Pato, Nerea 
  • Cornil, Jérôme
  • Veciana, Jaume
  • Ratera, Immaculada
We describe the modification of the work function (WF) of Au(111) upon deposition of self-assembled monolayers (SAMs) with two donor–acceptor (D–A) systems, one based on a ferrocene-polychlorotriphenylmethyl radical (Fc–PTM) dyad and another on its non-radical dyad analogue. Kelvin Probe Force Microscopy (KPFM) has been used to measure the changes in the Contact Potential Difference (CPD) between the tip and the SAM under application of a cycling sweep of direct current (DC) voltage bias. These measurements showed that both SAMs exhibit a hysteretic behaviour in their WF changes. Interestingly, the hysteresis loop of the radical SAM is notably reduced when irradiated with NIR light, which we attribute to the bistable nature of this SAM in which neutral radical dyad molecules are excited into a zwitterionic state following a light driven intramolecular charge transfer (ICT) from the Fc unit to the PTM radical unit. Consequently, under NIR irradiation the WF hysteresis is almost quenched and the WF value of the functionalized gold surface is significantly shifted by +250 mV recovering their original values when the irradiation is suppressed. Remarkable is the large WF shift attained, one of the highest values reported in the literature, and the unprecedented fact that it is achieved under irradiation in the IR region due to an intramolecular electronic reorganization. In contrast, the WF value and the WF hysteresis of the non-radical SAM does not change upon NIR irradiation since this SAM does not display bistability., This work was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under Grant 2.5020.11. J. C. is an FNRS research director. The authors also acknowledge the financial support from Instituto de Salud Carlos III, through “Acciones CIBER.” The Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative funded by the VI National R&D&I Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also appreciate the financial support through projects: FANCY (CTQ2016-80030-R), and MOTHER (MAT2016-80826-R), granted by DGI (Spain), GenCat (2017 SGR 918), financed by DGR (Catalunya), and Severo Ochoa Program Grant SEV-2015-0496, financed by Mineco (Spain)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Approach to Electrochemically Switchable Monolayer MoS2 Transistors

  • Zhao, Yuda
  • Bertolazzi, Simone
  • Maglione, Maria Serena
  • Rovira, Concepció
  • Mas Torrent, Marta
  • Samorì, Paolo
As Moore's law is running to its physical limit, tomorrow's electronic systems can be leveraged to a higher value by integrating “More than Moore” technologies into CMOS digital circuits. The hybrid heterostructure composed of two‐dimensional (2D) semiconductors and molecular materials represents a powerful strategy to confer new properties to the former components, realize stimuli‐responsive functional devices, and enable diversification in “More than Moore” technologies. Here, an ionic liquid (IL) gated 2D MoS2 field‐effect transistor (FET) with molecular functionalization is fabricated. The suitably designed ferrocene‐substituted alkanethiol molecules not only improve the FET performance, but also show reversible electrochemical switching on the surface of MoS2. Field‐effect mobility of monolayer MoS2 reaches values as high as ≈116 cm2 V−1 s−1 with Ion/Ioff ratio exceeding 105. Molecules in their neutral or charged state impose distinct doping effect, efficiently tuning the electron density in monolayer MoS2. It is noteworthy that the joint doping effect from IL and switchable molecules results in the steep subthreshold swing of MoS2 FET in the backward sweep. These results demonstrate that the device architecture represents an unprecedented and powerful strategy to fabricate switchable 2D FET with a chemically programmed electrochemical signal as a remote control, paving the road toward novel functional devices., Device fabrication was carried out in part at the nanotechnology facility eFab (IPCMS, Strasbourg). The authors acknowledge funding from European Commission through the ERC project SUPRA2DMAT (GA‐833707), the Marie‐Curie IEF STELLAR (GA‐795615), the Graphene Flagship Core 2 project (GA‐785219), the Marie Sklodowska‐Curie project ITN project iSwitch (GA‐642196), the Agence Nationale de la Recherche through the Labex projects CSC (ANR‐10‐LABX‐0026 CSC), and NIE (ANR‐11‐LABX‐0058 NIE) within the Investissement d'Avenir program (ANR‐10‐120 IDEX‐0002‐02), the International Center for Frontier Research in Chemistry (icFRC). The authors also thank the Spanish Ministry of Economy and Competitiveness, through projects FANCY CTQ2016‐80030‐R and the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496). This research was also supported by Generalitat de Catalunya (grant 2017SGR918)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversal of the Direction of Rectification Induced by Fermi Level Pinning at Molecule–Electrode Interfaces in Redox-Active Tunneling Junctions

  • Han, Yingmei
  • Maglione, Maria Serena
  • Díez Cabanes, Valentín
  • Casado Montenegro, Javier
  • Yu, Xiaojiang
  • Karuppannan, Senthil Kumar
  • Zhang, Ziyu
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Cornil, Jérôme
  • Veciana, Jaume
  • Nijhuis, Christian A.
Control over the energy level alignment in molecular junctions is notoriously difficult, making it challenging to control basic electronic functions such as the direction of rectification. Therefore, alternative approaches to control electronic functions in molecular junctions are needed. This paper describes switching of the direction of rectification by changing the bottom electrode material M = Ag, Au, or Pt in M–S(CH2)11S–BTTF//EGaIn junctions based on self-assembled monolayers incorporating benzotetrathiafulvalene (BTTF) with EGaIn (eutectic alloy of Ga and In) as the top electrode. The stability of the junctions is determined by the choice of the bottom electrode, which, in turn, determines the maximum applied bias window, and the mechanism of rectification is dominated by the energy levels centered on the BTTF units. The energy level alignments of the three junctions are similar because of Fermi level pinning induced by charge transfer at the metal–thiolate interface and by a varying degree of additional charge transfer between BTTF and the metal. Density functional theory calculations show that the amount of electron transfer from M to the lowest unoccupied molecular orbital (LUMO) of BTTF follows the order Ag > Au > Pt. Junctions with Ag electrodes are the least stable and can only withstand an applied bias of ±1.0 V. As a result, no molecular orbitals can fall in the applied bias window, and the junctions do not rectify. The junction stability increases for M = Au, and the highest occupied molecular orbital (HOMO) dominates charge transport at a positive bias resulting in a positive rectification ratio of 83 at ±1.5 V. The junctions are very stable for M = Pt, but now the LUMO dominates charge transport at a negative bias resulting in a negative rectification ratio of 912 at ±2.5 V. Thus, the limitations of Fermi level pinning can be bypassed by a judicious choice of the bottom electrode material, making it possible to access selectively HOMO- or LUMO-based charge transport and, as shown here, associated reversal of rectification., The authors express thanks to the Ministry of Education (MOE) for supporting this research under award nos. MOE2018-T2-1-088 and R-143-000-B30-112. We also acknowledge the Prime Minister’s Office, Singapore, under its Medium Sized Centre program for supporting this research. This work was also funded by ITN iSwitch 642196, the DGI (Spain), projects FANCY (CTQ2016-80030-RA), GENESIS (PID2019-111682RB-I00) and MOTHER (MAT2016-80826- R), the Generalitat de Catalunya (2017-SGR-918), the Instituto de Salud Carlos III, through “Acciones CIBER”, and the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” program for Centers of Excellence in R&D (FUNFUTURE; CEX2019-000917-S). The work in Mons was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196). Computational resources were provided by the Consortium des É quipements de Calcul Intensif (CÉ CI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under grant 2.5020.11. J.C. is an FNRS research director., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bias-Polarity-Dependent Direct and Inverted Marcus Charge Transport Affecting Rectification in a Redox-Active Molecular Junction

  • Han, Yingmei
  • Nickle, Cameron
  • Maglione, Maria Serena
  • Karuppannan, Senthil Kumar
  • Casado Montenegro, Javier
  • Qi, Dong-Chen
  • Chen, Xiaoping
  • Tadich, Anton
  • Cowie, Bruce
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Cornil, Jérôme
  • Veciana, Jaume
  • Barco, Enrique del
  • Nijhuis, Christian A.
This paper describes the transition from the normal to inverted Marcus region in solid-state tunnel junctions consisting of self-assembled monolayers of benzotetrathiafulvalene (BTTF), and how this transition determines the performance of a molecular diode. Temperature-dependent normalized differential conductance analyses indicate the participation of the HOMO (highest occupied molecular orbital) at large negative bias, which follows typical thermally activated hopping behavior associated with the normal Marcus regime. In contrast, hopping involving the HOMO dominates the mechanism of charge transport at positive bias, yet it is nearly activationless indicating the junction operates in the inverted Marcus region. Thus, within the same junction it is possible to switch between Marcus and inverted Marcus regimes by changing the bias polarity. Consequently, the current only decreases with decreasing temperature at negative bias when hopping is “frozen out,” but not at positive bias resulting in a 30-fold increase in the molecular rectification efficiency. These results indicate that the charge transport in the inverted Marcus region is readily accessible in junctions with redox molecules in the weak coupling regime and control over different hopping regimes can be used to improve junction performance., Y.H., C.N., M.S.M., and S.K.K. contributed equally to this work. The authors acknowledge the Ministry of Education (MOE) for supporting this research under award no. MOE2019-T2-1-137. Prime Minister's Office, Singapore under its Medium sized centre program is also acknowledged for supporting this research. The authors also gratefully acknowledge the Australian Synchrotron (ANSTO) soft X-ray spectroscopy beamline where the SAM characterization was conducted. C.N. and E.d.B. acknowledge support from the US National Science Foundation (grant no. ECCS#1916874). D.Q. acknowledges the support of the Australian Research Council (Grant No. FT160100207). Authors also acknowledge the Marie-Sklodowska-Curie project ITN iSwitch (GA-642196), Spanish Ministry of Economy and Competitiveness (project FANCY CTQ2016-80030-R, GENESIS PID2019-111682RB-I00 and Severo Ochoa programme for Centers of excellence in R&D (SEV-2015-0496)). J.C. is a research director of the Belgian National Fund for Scientific Research (FNRS)., Peer reviewed