Pasar al contenido principal

MECANOQUIMICA EN CONDICIONES CONTROLADAS DE PRESION: APLICACIONES EN MATERIALES AVANZADOS Y NANOTECNOLOGIA

CTQ2015-67755-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

The self-absorption phenomenon in quantitative Raman spectroscopy and how to correct its effects

  • Uriarte, Lucas Martinez
  • Bonales, Laura
  • Dubessy, Jean
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Cáceres Alonso, María Mercedes
When the wavelength of the Raman scattered light coincides with the absorption spectrum of the sample, a phenomenon known as Raman self-absorption occurs. If the absorption wavelength range matches completely with the Raman wavenumber range for a given excitation line (high absorption), this process causes spectra with poor signal-to-noise-ratio, making the acquisition nearly impossible. When the absorption of the sample and the Raman scattered are partially coincident (low absorption), smaller modifications in the band-profile of the Raman spectrum are expected difficult to be detected. If a different excitation wavelength is available in order to avoid or minimize this phenomenon, a correction method is customary. The correction methods developed so far in quantitative analysis are still very complex and require the knowledge of several sampling parameters. In this work, we present a very simple but reliable method based on the Beer-Lambert law to correct low self-absorption effects. This method uses simple concepts, a straightforward methodology and the concentration of the Raman active component in the liquid matrix is the only parameter required to perform the correction. This method may be extremely useful in different fields in which Raman spectroscopy is used to obtain molecular and structural information from a band profile analysis. As an example, the method is applied here to successfully correct the Raman spectra of different CuSO4 aqueous solutions excited at 532nm.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Generalized Stress-Redox Equivalence: A Chemical Link between Pressure and Electronegativity in Inorganic Crystals

  • Lobato Fernández, Álvaro
  • Osman, Hussien
  • Salvadó, Miguel
  • Pertierra, Pilar
  • Vegas, Ángel
  • García Baonza, Valentín
  • Recio, José Manuel
The crystal structure of many inorganic compounds can be understood as a metallic matrix playing the role of a host lattice in which the nonmetallic atomic constituents are located, the Anions in Metallic Matrices (AMM) model stated. The power and utility of this model lie in its capacity to anticipate the actual positions of the guest atoms in inorganic crystals using only the information known from the metal lattice structure. As a pertinent test-bed for the AMM model, we choose a set of common metallic phases along with other nonconventional or more complex structures (face-centered cubic (fcc) and simple cubic Ca, CsCl-type BaSn, hP4-K, and fcc-Na) and perform density functional theory electronic structure calculations. Our topological analysis of the chemical pressure (CP) scalar field, easily derived from these standard first-principles electronic computations, reveals that CP minima appear just at the precise positions of the nonmetallic elements in typical inorganic crystals presenting the above metallic subarrays: CaF2, rock-salt and CsCl-type phases of CaX (X = O, S, Se, Te), BaSnO3, K2S, and NaX (X = F, Cl, Br, I). A theoretical basis for this correlation is provided by exploring the equivalence between hydrostatic pressure and the oxidation (or reduction) effect induced by the nonmetallic element on the metal structure. Indeed, our CP analysis leads us to propose a generalized stress-redox equivalence that is able to account for the two main observed phenomena in solid inorganic compounds upon crystal formation: (i) the expansion or contraction experienced by the metal structure after hosting the nonmetallic element while its topology is maintained and (ii) the increasing or decreasing of the effective charge associated with the anions in inorganic compounds with respect to the charge already present in the interstices of the metal network. We demonstrate that a rational explanation of this rich behavior is provided by means of Pearson-Parr’s electronegativity equalization principle.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and electrical study of the topological insulator SnBi2Te4 at high pressures

  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Sans Tresserras, Juan Ángel
  • Andrada-Chacón, A.
  • Sánchez-Benitez, J.
  • Popescu, C.
  • Gomis, O.
  • Pereira, A. L. J.
  • García-Domene, B.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Daisenberger, D.
  • Oeckler, O.
We report high-pressure X-ray diffraction and electrical measurements of the topological insulator SnBi2Te4 at room temperature. The pressure dependence of the structural properties of the most stable phase of SnBi2Te4 at ambient conditions (trigonal phase) have been experimentally determined and compared with results of our ab initio calculations. Furthermore, a comparison of SnBi2Te4 with the parent compound Bi2Te3 shows that the central TeSnTe trilayer, which substitutes the Te layer at the center of the TeBiTeBiTe layers of Bi2Te3, plays a minor role in the compression of SnBi2Te4. Similar to Bi2Te3, our resistance measurements and electronic band structure simulations in SnBi2Te4 at high pressure suggest that this compound exhibits a pressure-induced electronic topological transition or Lifshitz transition between 3.5 and 5.0 GPa. (C) 2016 Published by Elsevier B.V., We thank Dr. Philipp Urban for preparing the sample. This work has been performed under financial support from Spanish MINECO under projects MAT2013-46649-C4-2-P, MAT2015-71070-REDC and CTQ2015-67755-C2-1-R and from Spanish Ministerio de Educacion, Cultura y Deporte as part of "Programa Campus de Excelencia Internacional/Programa de Valoracion y Recursos Conjuntos de I + D + i VLC/CAMPUS" through projects SP20140701 and SP20140871. One of the experiments were performed at MSPD-BL04 beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.A.S. thanks "Juan de la Cierva" fellowship program for funding. A. A.-C. and J.S.-B. are also grateful to Spanish MINECO for the FPI (BES-2013-066112) and Ramon y Cajal (RyC-2010-06276) fellowships. We acknowledge Diamond Light Source for time on beamline I15 under Proposal EE9102.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Pressure-Induced Reversible Framework Rearrangement and Increased Polarization in the Polar [NH₄[Cd(HCOO)₃] Hybrid Perovskite

  • Bermúdez-García, Juan Manuel
  • García-Fernández, Alberto
  • Andrada-Chacón, A.
  • Sánchez-Benítez, Javier
  • Ren, Wei
  • Hu, Shunbo
  • Gu, Teng
  • Xiang, Hongjun
  • Biczysko, Malgorzata
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Stroppa, Alessandro
  • Señarís-Rodríguez, M. A.
This is an accepted version of the published document. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/C9QI00749K., Electronic supplementary information (ESI) available: Detail of PXRD patterns and Le Bail refinement of [NH4][Cd(HCOO)3] upon compression at room temperature. Diagram showing the main changes on the crystal structure caused by applied external pressure. See DOI: 10.1039/c9qi00749k, [Abstract] In this work, we study the structural changes of the polar [NH₄[Cd(HCOO)₃] hybrid perovskite under external hydrostatic pressure. We report a reversible framework rearrangement as a function of pressure characterized by: (i) a gradual modification of one formate ligand, which changes its coordination mode from a bridging syn–anti mode at atmospheric pressure (LP-phase) to a chelating-anti mode at high-pressure (HP-phase) and (ii) a change in the coordination of the Cd²⁺ cations from six-coordinated (LP-phase) to hepta-coordinated (HP-phase). Very interestingly, this unprecedented framework arrangement displays a large electrical polarization. For instance, the polarization value observed at p = 17.7 GPa is about four times the polarization at atmospheric pressure. Therefore, we report that the external pressure induces a novel framework rearrangement in the polar [NH₄[Cd(HCOO)₃] hybrid perovskite with enhanced electrical polarization. This structure–property relationship offers new insights for designing novel ferroelectric materials based on pressure-responsive hybrid perovskite materials., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the projects [CSD2007-00045, CTQ2015-67755-C2-1-R and MAT2017-86453-R], Ministerio de Ciencia, Innovación y Universidades (MICINN) and EU-FEDER under the project PGC2018-094814-B-C21 and Xunta de Galicia under the project ED431C2018/39. They also thank the MALTA Consortium for making their facilities available, and acknowledge B. Winkler and L. Bayarjargal of the Institute for Geoscience, University of Frankfurt am Main, Germany, for the experimental Raman spectra. J. M. B.-G. acknowledges Xunta de Galicia for a Postdoctoral Fellowship, Xunta de Galicia; ED431C2018/39
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-Induced Conductivity in a Neutral Nonplanar Spin- Localized Radical

  • Souto Salom, Manuel
  • Blasi, Davide
  • Ratera, Immaculada
  • Rovira, Concepció
  • Veciana, Jaume
Souto, Manuel et al., There is a growing interest in the development of single-component molecular conductors based on neutral organic radicals that are mainly formed by delocalized planar radicals, such as phenalenyl or thiazolyl radicals. However, there are no examples of systems based on nonplanar and spin-localized C-centered radicals exhibiting electrical conductivity due to their large Coulomb energy (U) repulsion and narrow electronic bandwidth (W) that give rise to a Mott insulator behavior. Here we present a new type of nonplanar neutral radical conductor attained by linking a tetrathiafulvalene (TTF) donor unit to a neutral polychlorotriphenylmethyl radical (PTM) with the important feature that the TTF unit enhances the overlap between the radical molecules as a consequence of short intermolecular S···S interactions. This system becomes semiconducting upon the application of high pressure thanks to increased electronic bandwidth and charge reorganization opening the way to develop a new family of neutral radical conductors., This work was supported by the EU ITN iSwitch 642196 DGI grant (BeWell; CTQ2013-40480-R), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), and the Generalitat de Catalunya (grant 2014- SGR-17). This work has also been supported by MINECO through the projects CSD2007-00045, CTQ2012- 38599-C02- 02 and CTQ2013-48252-P. ICMAB acknowledges support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M.S. is grateful to Spanish Ministerio de Educación, Cultura y Deporte for a FPU grant and he is enrolled in the Material Science Ph.D. program of UAB. D.B. is grateful to the EC ITN Nano2fun grant no607721. M.P.A. is grateful to the Spanish Ministerio de Educación, Cultura y Deporte for an FPU grant. M.P.A. and V.G.B. thank the project CTQ2015-67755-C2-1-R. H.O. Jeschke, M. Tomic and R. Valenti thank the Deutsche Forschungsgemeinschaft (DFG) for funding through grant SFB/TRR49 and Steve Winter for useful discussions. We thank Carlos Goḿ ez-Garcıá (Univ. Valencia) for SQUID measurements as well as Xavier Fontrodona (Univ. Girona) for X-ray diffraction measurements and Mercedes Taravillo (UCM) for the support provided during the high pressure Raman measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of low-density water to high-density water structural transformation in milk during high-pressure processing

  • Guignon, Bérengère
  • Hidalgo Baltasar, Eduardo
  • Sanz Martínez, Pedro Dimas
  • Baonza, Valentín G.
  • Taravillo, M.
The objective of this research was to check whether the observed low-density water (LDW) to high-density water (HDW) transformation does take place or not in a complex aqueous system like those involved in high pressure processing of food. In-situ measurements of speed-of-sound up to 640 MPa were used for this purpose. After validation of the methodology in liquid water at 25 ºC, LDW-to-HDW transformation was also evidenced in sodium caseinate solution and milk samples. The transformation pressure was always observed at 275 MPa. Since water plays a key role in most biochemical transformations, the occurrence of a LDW-HDW transition should be taken into account for understanding the complex component interactions in milk and other related systems under pressure. Industrial relevance: Opportunities exist for the industry to use pressure as a tool for texturing dairy products. Process parameter choice to obtain a given texture is tricky due to the complexity of milk component interactions under pressure. As a main component in foods, water structural transformation under pressure should not be ignored by experts in the field, This work has been funded by the Spanish Ministry of Science and Innovation under project MALTA-Consolider Ingenio 2010 (CSD2007-00045), by the Spanish Ministry of Economy and Competitiveness under projects AGL2012-39756-C02-01/ALI, CTQ2015-67755-C2-1-R and MAT2015-71070-REDC, and by GRUPOS UCM 910481, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Industrial viability of the hyperbaric method to store perishable foods at room temperature

  • Bermejo-Prada, Ana
  • Colmant, Alexandra
  • Otero, Laura
  • Guignon, Bérengère
Preliminary studies at lab-scale have shown that hyperbaric storage at room temperature (HS-RT) allows preserving safety and quality of perishable foods for at least 15 days at moderate pressures (below 250 MPa). However, it is unclear whether this novel storage method would be feasible at larger scale. Thus, the purpose of this research was to assess the industrial viability of HS-RT. The viability factors addressed were (1) consumer perception of the stored products, (2) feasibility of the equipment design, (3) storage cost, and (4) environmental impact. The study is conducted in comparison to refrigeration for the storage of a pasteurized juice during 15 days. Results provide clear evidences of HS-RT viability for factors (1), (2) and (4) while reservations have to be expressed regarding factor (3)., This work has been funded by the Spanish Ministry of Science and Innovation under projects: AGL2007-63314/ALI and MALTA-Consolider Ingenio 2010 (CSD2007-00045), by the Spanish Ministry of Economy and Competitiveness under projects CTQ2015-67755-C2-1-R and MAT2015-71070-REDC, and by grupos UCM 910481. A. Bermejo was supported by a predoctoral grant from CSIC (JAE-PreDoc program) (JAEPre102) jointly financed by the European Social Fund (FSE 2007–2009)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large magnetoelectric coupling near room temperature in synthetic melanostibite Mn2FeSbO6

  • Dos Santos-García, Antonio J.
  • Solana-Madruga, Elena
  • Ritter, Clemens
  • Andrada-Chacón, Adrián
  • Sánchez-Benítez, J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Sáez-Puche, Regino
  • Schmidt, Rainer
Multiferroic materials exhibit two or more ferroic orders and have potential applications as multifunctional materials in the electronics industry. A coupling of ferroelectricity and ferromagnetism is hereby particularly promising. We show that the synthetic melanostibite mineral MnFeSbO (R (Formula presented.) space group) with ilmenite-type structure exhibits cation off-centering that results in alternating modulated displacements, thus allowing antiferroelectricity to occur. Massive magnetoelectric coupling (MEC) and magnetocapacitance effect of up to 4000 % was detected at a record high temperature of 260 K. The multiferroic behavior is based on the imbalance of cationic displacements caused by a magnetostrictive mechanism, which sets up an unprecedented example to pave the way for the development of highly effective MEC devices operational at or near room temperature., The authors thank MINECO for funding through projects MAT2013‐44964‐R, MAT2013‐41099‐R, MAT2015‐71070‐REDC, MAT2014‐52405‐C02‐02, CTQ2015‐67755‐C2‐1‐R (MINECO/FEDER) and FPI (BES‐2013‐066112) and Ramon y Cajal (RyC‐2010–06276) fellowships, and Comunidad de Madrid through S‐2013/MIT‐2753 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-pressure synthesis and structural characterization of Na1-xKxMgH3 perovskite hydrides

  • Andrada-Chacón, A.
  • Alonso, J. A.
  • Pomjakushin, V.
  • Sánchez-Benítez, J.
Perovskite hydrides containing light elements are attractive for hydrogen storage. We describe a new series of composition NaKMgH (0 ≤ x ≤ 1) prepared by an original synthesis method based on the direct reaction of simple hydrides under high-pressure and high-temperature conditions. Mixtures of MgH, NaH and KH were enclosed in gold capsules and treated in a piston-cylinder hydrostatic press at moderate pressures of 2 GPa and temperatures around 775 °C. Well-crystallized hydride samples were analyzed by x-ray and neutron powder diffraction, collecting excellent patterns even in non-deuterated samples that provided an accurate description of the crystal structure features. For x ≤ 0.75 the perovskites are isostructural with GdFeO-type oxides, characterized by the same tilting scheme of the MgH octahedra. For the end-member KMgH the structure is cubic, adopting the canonical aristotype of the perovskite structure. The analysis of the tolerance factor across the series accounts for the stability of those samples in the studied compositional range., This research was supported by the MICINN and MINECO under projects MALTA-Consolider Team (CSD2007-00045, MAT2015-71070-REDC), MAT2013-41099-R and CTQ2015-67755-C2-1-R (MINECO/FEDER). A. A-C. acknowledges support from a MINECO-FPI grant (BES-2013-066112).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Linear, Non-Conjugated Cyclic and Conjugated Cyclic Paraphenylene under Pressure

  • Baonza, Valentín G.
  • Peña-Álvarez, Miriam
  • Fanetti, Samuele
  • Falsini, Naomi
  • Novelli, Giulia
  • Casado, Juan
  • Taravillo, Mercedes
  • Parsons, Simon
  • Bini, Roberto
  • Citroni, Margherita
The n-paraphenylene family comprises chains of phenylene units linked together by C-C bonds that are between single- and double-bonded, and where n corresponds to the number of phenylene units. In this work, we compare the response of the optical properties of different phenylene arrangements. We study linear chains (LPP), cyclic systems (CPPs), and non-conjugated cyclic systems with two hydrogenated phenylenes (H4[n]CPP). Particularly, the systems of interest in this work are [6]LPP, [12]- and [6]CPP and H4[6]CPP. This work combines Raman and infrared spectroscopies with absorption and fluorescence (one- and two-photon excitations) measured as a function of pressure up to maximum of about 25 GPa. Unprecedented crystallographic pressure-dependent results are shown on H4[n]CPP, revealing intramolecular ¿-¿ interactions upon compression. These intramolecular interactions justify the H4[n]CPP singular optical properties with increasing fluorescence lifetime as a function of pressure.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-induced modification of sodium caseinate techno-functional properties

  • Costo, Rocío
  • Sanz Martínez, Pedro Dimas
  • Guignon, Bérengère
Sodium caseinate (NaCas) is a quite common ingredient for the manufacture of food products because of its multiple techno-functional properties. These properties might be enhanced or impaired by high-pressure treatment, which could be employed both, as a preservation treatment or for transformation purposes. To check whether pressure could be able to produce changes in the techno-functional properties of NaCas, aqueous solutions of NaCas at mass fractions of 0.026, and 0.052 were prepared and treated under pressures of 200 or 600 MPa during 15 min at 15, 30, or 60°C. Changes in turbidity, viscosity, foaming, gel-forming, and emulsifying properties of the NaCas solutions before and after pressure–temperature treatments were measured. Turbidity analyses showed that casein aggregates were significantly modified after pressure treatments at 30°C and 60°C. Several techno-functional properties of NaCas dispersions were concomitantly affected. This study suggests that some properties as viscosity, foamability, or water holding capacity are affected by high-pressure treatments but as these changes are below 20%, NaCas should be considered as a pressure-proof additive., This work has been supported by the “Plan Nacional de I+D+i” through the projects CTQ2015-67755-C2-1-R (MINECO/FEDER) and MAT2015-71070-REDC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The self-absorption phenomenon in quantitative Raman spectroscopy and how to correct its effects

  • Uriarte, L. M.
  • Jiménez Bonales, Laura
  • Dubessy, J.
  • Lobato, A.
  • Baonza, Valentín G.
  • Caceres, M.
When the wavelength of the Raman scattered light coincides with the absorption spectrum of the sample, a phenomenon known as Raman self-absorption occurs. If the absorption wavelength range matches completely with the Raman wavenumber range for a given excitation line (high absorption), this process causes spectra with poor signal-to-noise-ratio, making the acquisition nearly impossible. When the absorption of the sample and the Raman scattered are partially coincident (low absorption), smaller modifications in the band-profile of the Raman spectrum are expected difficult to be detected. If a different excitation wavelength is available in order to avoid or minimize this phenomenon, a correction method is customary. The correction methods developed so far in quantitative analysis are still very complex and require the knowledge of several sampling parameters. In this work, we present a very simple but reliable method based on the Beer-Lambert law to correct low self-absorption effects. This method uses simple concepts, a straightforward methodology and the concentration of the Raman active component in the liquid matrix is the only parameter required to perform the correction. This method may be extremely useful in different fields in which Raman spectroscopy is used to obtain molecular and structural information from a band profile analysis. As an example, the method is applied here to successfully correct the Raman spectra of different CuSO4 aqueous solutions excited at 532 nm., This work was supported by the following projects: CTQ2015-67755-C2-1-R (MICINN) and MALTA-Consolider Team grant MAT2015-71070-REDC (MINECO). A. Lobato acknowledge financial support from FPU grant no. FPU13/05731., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Infrared spectroscopic study of the formation of fossil resin analogs with temperature using trans-communic acid as precursor

  • Rodríguez Montoro, Óscar
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Taravillo Corralo, Mercedes
For million years resin exudates have undergone chemical alterations by heat, pressure, radiation, water, oxygen, microorganisms, and have suffered processes of sedimentation and diagenesis. These agents have affected the organic functional groups present in the terpenes of the resins, giving rise to what we nowadays know as fossil resins. In this work, we try to get further insight in the chemical formation of fossil resins. As the simulation of the natural process is quite complex, we have focused on the temperature induced reactivity of the trans-communic acid, the main component of the Class I resins. Using this terpene derivate as a very basic model of a resin exudate, we have monitored their thermal changes by infrared spectroscopy, Differential Scanning Calorimetry and Thermogravimetric Analysis within the range of 25 to 340 °C. The temperature-induced transformation, both in presence and absence of inert atmosphere, is discussed on the basis of the reactivity of the conjugated double-bond, the exocyclic bond and the carboxylic acid group present in the trans-communic acid. The results obtained in these series of experiments agree with the maturation scheme accepted in the literature for natural resins, i.e. an initial cross-linked polymerization and a subsequent maturation reaction. From combined DSC/TGA and infrared spectroscopy results, we conclude that chemical changes produced in the trans-communic acid in the range 130–175 °C may mimic the initial polymerization-like process in the natural resins, whereas those produced between 180 and 340 °C seem to correspond to the maturation pathways described in the literature for fossil resins Class Ib. Spectral assignment of the most relevant infrared-active modes of the trans-communic acid at 25 °C is also provided with the aid of Density Functional Theory calculations.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Theoretical (DFT) and experimental (Raman and FTIR) spectroscopic study on communic acids, main components of fossil resins

  • Rodríguez Montoro, Óscar
  • Tortajada Pérez, José
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Taravillo Corralo, Mercedes
The objective of this work is to establish a spectral assignment of several communic acids. The most significant vibrational modes of three stereoisomers of communic acids [trans-, cis-, and iso- (or mirceo-)] are presented. They are showed throughout experimental Raman and IR spectra, and on the basis on calculations with Density Functional Theory (DFT) and the assignment of the spectral bands of different resins found in the literature. These three communic acids studied are the most important isomers present in the scaffold of the fossil resins Class I, as monomers or co-polymerized according to several authors. These kinds of terpenes are used as starting material, for example, for the synthesis of the fungicide and compounds bioactives. In a novel way, it is reported jointly the assignment of the experimental Infrared and Raman modes together with theoretical modes, since normally the authors tend to focus on one or another spectroscopic technique only. These results can be used as a reference for distinguishing amber from less matured resins as copal, determining the local origin of archaeological fossilized resins. Moreover, they will serve as help to differentiate between real and imitation ambers.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Pressure-induced reversible framework rearrangement and increased polarization in the polar [NH<sub>4</sub>][Cd(HCOO)<sub>3</sub>] hybrid perovskite

  • Bermúdez García, Juan Manuel
  • García Fernández, Alberto
  • Andrada Chacón, Adrián
  • Sánchez Benítez, Francisco Javier
  • Ren, Wei
  • Hu, Shunbo
  • Gu, Teng
  • Xiang, Hongjun
  • Biczysko, Malgorzata
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Stroppa, Alessandro
  • Señarís-Rodríguez, María Antonia
In this work, we study the structural changes of the polar [NH4][Cd(HCOO)3] hybrid perovskite under external hydrostatic pressure. We report a reversible framework rearrangement as a function of pressure characterized by: (i) a gradual modification of one formate ligand, which changes its coordination mode from a bridging syn–anti mode at atmospheric pressure (LP-phase) to a chelating-anti mode at high pressure (HP-phase) and (ii) a change in the coordination of the Cd2+ cations from six-coordinated (LPphase) to hepta-coordinated (HP-phase). Very interestingly, this unprecedented framework arrangement displays a large electrical polarization. For instance, the polarization value observed at p = 17.7 GPa is about four times the polarization at atmospheric pressure. Therefore, we report that the external pressure induces a novel framework rearrangement in the polar [NH4][Cd(HCOO)3] hybrid perovskite with enhanced electrical polarization. This structure–property relationship offers new insights for designing novel ferroelectric materials based on pressure-responsive hybrid perovskite materials.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Chemical pressure–chemical knowledge: squeezing bonds and lone pairs within the valence shell electron pair repulsion model

  • Lobato Fernández, Álvaro
  • Osman, Hussien
  • Salvadó, Miguel
  • Taravillo Corralo, Mercedes
  • García Baonza, Valentín
  • Recio, José Manuel
The valence shell electron pair repulsion (VSEPR) model is a demanding testbed for modern chemical bonding formalisms. The challenge consists in providing reliable quantum mechanical interpretations of how chemical concepts such as bonds, lone pairs, electronegativity, or hypervalence influence (or modulate) molecular geometries. Several schemes have been developed thus far to visualize and characterize these effects; however, to the best of our knowledge, no scheme has yet incorporated the analysis of the premises derived from the ligand close-packing (LCP) extension of the VSEPR model. Within the LCP framework, the activity of the lone pairs of the central atom and ligand–ligand repulsions constitute the two key features necessary to explain certain controversial molecular geometries that do not conform to the VSEPR rules. Considering the dynamical picture obtained when electron local forces at different nuclear configurations are evaluated from first-principles calculations, we investigate the chemical pressure distributions in a variety of molecular systems, namely, electron-deficient molecules (BeH2, BH3, BF3), several AX3 series (A: N, P, As; X: H, F, Cl), SO2, ethylene, SF4, ClF3, XeF2, and nonequilibrium configurations of water and ammonia. Our chemical pressure maps clearly reveal space regions that are totally consistent with the molecular and electronic geometries predicted by VSEPR and provide a quantitative correlation between the lone pair activity of the central atom and electronegativity of ligands, which are in agreement with the LCP model. Moreover, the analysis of the kinetic and potential energy contributions to the chemical pressure allows us to provide simple explanations on the connection between ligand electronegativity and electrophilic/nucleophilic character of the molecules, with interesting implications in their potential reactivity. NH3, NF3, SO2, BF3, and the inversion barrier of AX3 molecules are selected to illustrate our findings.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Temperature effects on the friction-like mode of graphite

  • Menéndez, Cesar
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Recio, José Manuel
Since the anharmonicity of the vibrational mode related to the relative rigid motion of graphene layers plays a decisive role in the friction behavior of graphite, a quantitative account of the temperature dependence of the frequency of this E2G(1) mode is worth to be investigated. Starting with the solution of the Morse quantum-mechanical oscillator, a relationship between the populated averaged vibrational quantum number and temperature is proposed. This expression is applied to our previous computed Morse fittings describing the anharmonic potential of this mode (Menéndez et al. in Phys Rev B 93:144112-1–144112-9, 2016) with the aim at providing the available vibrational energy at different pressures and temperatures. We show that the average vibrational quantum number decreases under pressure but the available vibrational energy is almost independent on pressure at a given temperature. As a result, the calculated temperature coefficient shows that inter-layer friction in graphite lowers as temperature increases with a similar trend regardless the pressure applied.