Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 53
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Generalized Stress-Redox Equivalence: A Chemical Link between Pressure and Electronegativity in Inorganic Crystals

  • Lobato Fernández, Álvaro
  • Osman, Hussien
  • Salvadó, Miguel
  • Pertierra, Pilar
  • Vegas, Ángel
  • García Baonza, Valentín
  • Recio, José Manuel
The crystal structure of many inorganic compounds can be understood as a metallic matrix playing the role of a host lattice in which the nonmetallic atomic constituents are located, the Anions in Metallic Matrices (AMM) model stated. The power and utility of this model lie in its capacity to anticipate the actual positions of the guest atoms in inorganic crystals using only the information known from the metal lattice structure. As a pertinent test-bed for the AMM model, we choose a set of common metallic phases along with other nonconventional or more complex structures (face-centered cubic (fcc) and simple cubic Ca, CsCl-type BaSn, hP4-K, and fcc-Na) and perform density functional theory electronic structure calculations. Our topological analysis of the chemical pressure (CP) scalar field, easily derived from these standard first-principles electronic computations, reveals that CP minima appear just at the precise positions of the nonmetallic elements in typical inorganic crystals presenting the above metallic subarrays: CaF2, rock-salt and CsCl-type phases of CaX (X = O, S, Se, Te), BaSnO3, K2S, and NaX (X = F, Cl, Br, I). A theoretical basis for this correlation is provided by exploring the equivalence between hydrostatic pressure and the oxidation (or reduction) effect induced by the nonmetallic element on the metal structure. Indeed, our CP analysis leads us to propose a generalized stress-redox equivalence that is able to account for the two main observed phenomena in solid inorganic compounds upon crystal formation: (i) the expansion or contraction experienced by the metal structure after hosting the nonmetallic element while its topology is maintained and (ii) the increasing or decreasing of the effective charge associated with the anions in inorganic compounds with respect to the charge already present in the interstices of the metal network. We demonstrate that a rational explanation of this rich behavior is provided by means of Pearson-Parr’s electronegativity equalization principle.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-Induced Phase Transitions in Sesquioxides

  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Ibáñez, Jordi
  • Pereira, André Luis de Jesús
[EN] Pressure is an important thermodynamic parameter, allowing the increase of matter density by reducing interatomic distances that result in a change of interatomic interactions. In this context, the long range in which pressure can be changed (over six orders of magnitude with respect to room pressure) may induce structural changes at a much larger extent than those found by changing temperature or chemical composition. In this article, we review the pressure-induced phase transitions of most sesquioxides, i.e., A(2)O(3) compounds. Sesquioxides constitute a big subfamily of ABO(3) compounds, due to their large diversity of chemical compositions. They are very important for Earth and Materials Sciences, thanks to their presence in our planet's crust and mantle, and their wide variety of technological applications. Recent discoveries, hot spots, controversial questions, and future directions of research are highlighted., This research was funded by Spanish Ministerio de Ciencia, Innovacion y Universidades under grants MAT2016-75586-C4-1/2/3-P, FIS2017-83295-P, PGC2018-094417-B-100, and RED2018-102612-T (MALTA-Consolider-Team network) and by Generalitat Valenciana under grant PROMETEO/2018/123 (EFIMAT). J. A. S. also acknowledges Ramon y Cajal Fellowship for financial support (RYC-2015-17482).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

beta-Bi2O3 under compression: Optical and elastic properties and electron density topology analysis

  • Pereira, A. L. J.
  • Gomis, O.
  • Sans Tresserras, Juan Ángel
  • Contreras-García, J.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Beltrán, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We report a joint experimental and theoretical study of the optical properties of tetragonal bismuth oxide (beta-Bi2O3) at high pressure by means of optical absorption measurements combined with ab initio electronic band structure calculations. Our results are consistent with previous results that show the presence of a second-order isostructural phase transition in Bi2O3 (from beta to beta') around 2 GPa and a phase transition above 15 GPa combined with a pressure-induced amorphization above 17-20 GPa. In order to further understand the pressure-induced phase transitions and amorphization occurring in beta-Bi2O3, we theoretically studied the mechanical and dynamical stability of the tetragonal structures of beta- and beta'-Bi2O3 at high pressure through calculations of their elastic constants, elastic stiffness coefficients, and phonon dispersion curves. The pressure dependence of the elastic stiffness coefficients and phonon dispersion curves confirms that the isostructural phase transition near 2 GPa is of ferroelastic nature. Furthermore, a topological study of the electron density shows that the ferroelastic transition is not caused by a change in number of critical points (cusp catastrophe), but by the equalization of the electron densities of both independent O atoms in the unit cell due to a local rise in symmetry. Finally, from theoretical simulations, beta'-Bi2O3 is found to be mechanically and dynamically stable at least up to 26.7 GPa under hydrostatic conditions; thus, the pressure-induced amorphization reported above 17-20 GPa in powder beta'-Bi2O3 using methanol-ethanol-water as pressure-transmitting medium could be related to the frustration of a reconstructive phase transition at room temperature and the presence of mechanical or dynamical instabilities under nonhydrostatic conditions., This work was performed with financial support from the Spanish Ministerio de Economia y Competitividad under Projects No. MAT2013-46649-C4-2/3-P and No. MAT2015-71070-REDC. This publication is the fruit of "Programa de Valoracion y Recursos Conjuntos de I+D+i VLC/CAMPUS" and was financed by the Spanish Ministerio de Educacion, Cultura y Deporte as part of "Programa Campus de Excelencia Internacional" through Projects No. SP20140701 and No. SP20140871 and by the Brazilian Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Project No. 201050/2012-9. Supercomputer time was provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. J.A.S. acknowledges financial support through the Juan de la Cierva fellowship (JCI-2011-09781).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Experimental and Theoretical Study of B2X3 Sesquichalcogenides under Extreme Conditions

  • Gallego-Parra, Samuel|||0000-0001-6516-4303
[ES] Los sesquicalcogenuros con estequiometria B2X3, con A = Al, Ga e In y X = S, Se y Te, han recibido gran atención a lo largo de los últimos años, en particular en como modificarlos para obtener nuevas estructuras con propiedades inéditas, permitiendo su uso en una amplia variedad de aplicaciones. Si bien vías como el uso de altas/bajas temperaturas o modificar la composición química han sido bastante explotadas para modificar y obtener nuevas estructuras, las altas presiones están ganando auge como una tercera vía para obtener nuevos materiales. El uso de altas presiones implica emplear celdas de yunques de diamantes, preparadas para alcanzar altas presiones, además de altas temperaturas. A estos dispositivos se acoplan multitud de técnicas experimentales, como espectroscópicas (Raman e IR), difracción y absorción de rayos X, medidas de absorción óptica, de resistividad, etc., con el fin de estudiar como la materia evoluciona en dichas condiciones extremas. Adicionalmente, los cálculos teóricos son empleados como apoyo a los resultados experimentales. Dentro de los trabajos existentes a altas presiones de esta familia de compuestos, estos han llegado a conclusiones incluso contradictorias, arrojando más dudas acerca su comportamiento bajo presión. De todos los integrantes de estos sesquicalcogenuros, Ga2S3, In2S3 y In2Se3, han sido los más estudiados bajo presión. En esta tesis se han evaluado los efectos de la alta presión en estos tres sesquicalcogenuros, haciendo uso de espectroscopia Raman y difracción de rayos X, siempre con el soporte de los cálculos teóricos, con el fin de aclarar los resultados publicados anteriormente. Fruto de estos trabajos, la presente tesis recoge los cuatro artículos publicados en revistas indexadas. Dichos artículos han dado luz al comportamiento bajo presión de estos compuestos, como caracterización de propiedades vibracionales y estructurales bajo presión, mecanismos de transición, transiciones de fase inducidas bajo presión, así como caracterizar dichas fases de alta presión. Con todo ello, estos trabajos pretenden no solo conocer fehacientemente el comportamiento bajo presión de estos tres sesquicalcogenuros, sino impulsar futuros trabajos en el resto de los compuestos de esta familia y en otros similares, como en compuestos ternario AB2X4 con estructura tipo espinela y vacantes ordenadas., [CA] Els sesquicalcogenurs amb estequiometria B2X3, amb B = Al, Ga, i In i X = S, Se, i Te, han rebut una gran atenció al llarg dels darrers anys, en particular sobre com modificar-los per tal d'obtindre noves estructures amb propietats inédites, permetent el seu ús en una àmplia varietat d'aplicacions. Si bé l'ùs d'altes/baixes temperatures o modificar la composició química han segut prou explotades per a modificar i obtindre noves estructures, les altes pressions estan guanyant importància com una tercera via per a obtindrer nous materials. L'ús d'altes presions implica emprar cel·les d'encluses de diamants, preparades per a assolir altes presions, a més a més d'altes temperatures. A aquestos dispositius s'acoblen multitud de tècniques experimentals, com ara espectroscòpiques (Raman i IR), difracció i absorció de raigs X, mesures òptiques, de resistivitat, etc, amb la finalitat d'estudiar com la matèria evoluciona en aquestes condicions extremes. Adicionalment, els càlculs teòrics son emprats com a recolçament dels resultats experimentals. Dins dels treballs existents a altes presions a aquesta familia de compostos s'ha arribat a determinades conclusions algunes de les quals son contradictòries, el que ha sembrat moltes dubtes al voltant del seu comportament sota pressió. De tots els integrants d'aquestos sesquicalcogenurs, Ga2S3, In2S3 i In2Se3 han sigut els més estudiats sota pressió. En aquesta tesi doctoral s'han evaluat els efectes de les altes pressions a aquestos tres sesquicalcogenurs, fent ús de l'espectroscopia Raman i la difracció de raigs X, sempre amb el suport dels càlculs teòrics, amb el fi d'aclarir els resultats previament publicats. Fruit d'aquestos treballs, la present tesi doctoral recull els quatre articles publicats a revistes indexades. Aquestos articles han vessat llum sobre el comportament sota pressió d'aquestos compostos, com ara la caracterització de les seues propietats vibracionals i estructurals sota pressió, les transicions de fase induides sota pressió i els mecanismes d'eixes transicions, així com la caracterització de les seues fases d'alta pressió. Amb tot, aquestos treballs pretenen no només conèixer el comportament sota pressió d'aquestos tres sesquicalcogenurs, sino també impulsar futurs treballs a la resta de compostos d'aquesta familia i altres compostos rel·lacionats, com ara els compostos ternaris AB2X4 de tipus espinela i de vacants ordenades., [EN] B2X3 sesquichalcogenides (A = Al, Ga and In, X = S, Se y Te) have received special attention along last years, with great emphasis in tailor them to attain new structures to novel properties, driving them in a huge number of applications. Although high/low temperature or varying chemical composition have been extensively used to modify and obtain new structures, high pressure is gaining relevance as an alternative way to synthetised new materials. To reach such pressures and additionally high/low temperatures, diamond anvil cells are used. Many experimental techniques can be coupled to these tools to study matter under extreme conditions (Raman and IR spectroscopy, X-ray diffraction and absorption, optical absorption, and resistivity measurements, among others). Additionally, computational simulations are used to give further support to the experimental results. Despite the several existing works devoted to the behaviour under pressure of this family, controversial results have been reported. The most studied of these sesquichalcogenides have been Ga2S3, In2S3 and In2Se3. The aim of this thesis is to revisit the pressure effects by means of Raman spectroscopy and X-ray diffraction, with the help of computational simulations, for the purpose of clarify the results published earlier. The current thesis contains the four articles published in indexed journals, resulting from the study of these three sesquichalcogenides. Such articles shed light to the pressure behavior of these compounds, their vibrational and structural properties under pressure, pressure-induced phase transitions and the mechanisms behind them and characterize such high-pressure phases. With these works, we pursue not only a depth understanding of the pressure behavior of these sesquichalcogenides, but boost future high-pressure works on the rest of the family and other similar compounds, as AB2X4 with spinel structure and ordered vacancies., The authors thank the financial support from Spanish Research Agency (AEI) under projects MALTA Consolider Team network (RED2018-102612-T) and projects MAT2015- 710, MAT2016-75586-C4-2/3-P, FIS2017-83295-P, PID2019-106383GB-41/42/43, and PGC2018-097520-A-100, as well as from Generalitat Valenciana under Project PROMETEO/2018/123 (EFIMAT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and Theoretical Study of Bi2O2Se Under Compression

  • Pereira, A.L.J.
  • Santamaría Pérez, David
  • Ruiz Fuertes, Javier
  • Popescu, Catalin
  • Muñoz, Alfonso
  • Rodríguez-Hernández, Plácida
  • Segura, Alfredo
  • Gracia, L.
  • Beltran, A.
  • Ruleova, P.
  • Drasar, C.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Gomis, O.|||0000-0001-6763-0638
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] We report a joint experimental and theoretical study of the structural, vibrational, elastic, optical, and electronic properties of the layered high-mobility semiconductor Bi2O2Se at high pressure. A good agreement between experiments and ab initio calculations is observed for the equation of state, the pressure coefficients of the Raman-active modes and the bandgap of the material. In particular, a detailed description of the vibrational properties is provided. Unlike other Sillen-type compounds which undergo a tetragonal to collapsed tetragonal pressure-induced phase transition at relatively low pressures, Bi2O2Se shows a remarkable structural stability up to 30 GPa; however, our results indicate that this compound exhibits considerable electronic changes around 4 GPa, likely related to the progressive shortening and hardening of the long and weak Bi-Se bonds linking the Bi2O2 and Se atomic layers. Variations of the structural, vibrational, and electronic properties induced by these electronic changes are discussed., This work was supported by Brazilian Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under project 201050/2012-9, by Spanish MINECO projects MAT2015-71070-REDC, MAT2016-75586-C4-1/2/3-P and CTQ2015-65207-P and by the Grant Agency of the Czech Republic (GA CR) under project 16-07711S. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. D.S.-P. and J.A.S. acknowledge the "Ramon y Cajal" fellowship program (RYC-2015-17482) and Spanish Mineco Projects (2014-15643 and 2017-83295-P). J.R.-F. acknowledge the "Juan de la Cierva" program (IJCI-2014-20513) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrolytic stability and biocompatibility on smooth muscle cells of polyethylene glycol-polycaprolactone-based polyurethanes

  • Morales-Gonzalez, Maria
  • Arévalo-Alquichire, Said
  • Diaz, Luis E.
  • Valero, Manuel F.
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
[EN] Interactions between smooth muscle cells (SMCs) and biomaterials must not result in phenotype changes as this may generate uncontrolled multiplication processes and occlusions in vascular grafts. The aim of this study was to relate the hydrolytic stability and biocompatibility of polyurethanes (PUs) on SMCs. A higher polycaprolactone (PCL) concentration was found to improve the hydrolytic stability of the material and the adhesion of SMCs. A material with 5% polyethylene glycol, 90% PCL, and 5% pentaerythritol presented high cell viability and adhesion, suggesting a contractile phenotype in SMCs depending on the morphology. Nevertheless, all PUs retained their elastic modulus over 120 days, similar to the collagen of native arteries (similar to 10 MPa). Furthermore, aortic SMCs did not present toxicity (viability over 80%) and demonstrated adherence without any abnormal cell multiplication processes, which is ideal for the function to be fulfiled in situ in the vascular grafts., The research and publication were supported by the Universidad de La Sabana (ING-205-2018) and the Minister of Science, Technology, and Innovation of the Republic of Colombia, MINCIENCAS (Contract number 80740-186-2019). M. M-G. would like to thank the Universidad de La Sabana for the scholarship for her master's studies. S. A-A. would like to thank MINCIENCIAS for the doctoral training scholarship (Grant 727-2015). The authors are thankful to Professor Ericsson Coy Barrera and his staff at Nueva Granada Military University for the access to the VarioskanT LUX multimode microplate reader. J. A. S. acknowledges the financial support by MINECO through FIS2017-83295-P, MAT2015-71070-REDC, MAT2016-75586-C4-1/2/3-P and the Ramon y Cajal Fellowship (RYC-201517482). CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural, vibrational and electrical study of compressed BiTeBr

  • Sans-Tresserras, Juan Ángel
  • Pereira, A.L.J.
  • Gomis, O.
  • SEGURA, A.
  • Muñoz, A.
  • Rodríguez-Hernández, Plácida
  • Catalin Popescu
  • Drasar, C.
  • Ruleova, P.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
Compresed BiTeBr has been studied from a joint experimental and theoretical perspective. Room-temperature x-ray diffraction, Raman scattering, and transport measurements at high pressures have been performed in this layered semiconductor and interpreted with the help of ab initio calculations. A reversible first-order phase transition has been observed above 6–7 GPa, but changes in structural, vibrational, and electrical properties have also been noted near 2 GPa. Structural and vibrational changes are likely due to the hardening of interlayer forces rather than to a second-order isostructural phase transition while electrical changes are mainly attributed to changes in the electron mobility. The possibility of a pressure-induced electronic topological transition and of a pressure-induced quantum topological phase transition in BiTeBr and other bismuth tellurohalides, like BiTeI, is also discussed., This work has been performed under financial support from Spanish MINECO under Projects No. MAT2013-46649-C4-2/3-P and MAT2015-71070-REDC. This publication is the outcome of "Programa de Valoracion y Recursos Conjuntos de I+D+i VLC/CAMPUS" and has been financed by the Spanish Ministerio de Educacion, Cultura y Deporte as part of "Programa Campus de Excelencia Internacional" through Projects No. SP20140701 and No. SP20140871. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. J.A.S. acknowledges the "Juan de la Cierva" fellowship program for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and vibrational properties of corundum-type In2O3 nanocrystals under compression

  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Errandonea, Daniel
  • García-Domene, Braulio
  • Popescu, Catalin
  • Manjón, Francisco-Javier
  • Singhal, A.
  • Achary, S.N.
  • Martinez-Garcia, D.
  • Pellicer-Porres, J.
  • Rodríguez-Hernández, P.
  • Muñoz, Alfonso
[EN] This work reports the structural and vibrational properties of nanocrystals of corundum-type In2O3 (rh-In2O3) at high pressures by using angle-dispersive x-ray diffraction and Raman scattering measurements up to 30 GPa. The equation of state and the pressure dependence of the Raman-active modes of the corundum phase in nanocrystals are in good agreement with previous studies on bulk material and theoretical simulations on bulk rh-In2O3. Nanocrystalline rh-In2O3 showed stability under compression at least up to 20 GPa, unlike bulk rh-In2O3 which gradually transforms to the orthorhombic Pbca (Rh2O3-III-type) structure above 12 14 GPa. The different stability range found in nanocrystalline and bulk corundum-type In2O3 is discussed., The authors thank the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under Grants No. MAT201675586-C4-1/2/3-P, No. MAT2013.46649-C4-1/2/3-P and No. MAT2015-71070-REDC (MALTA Consolider). A M and P R-H acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. J A S acknowledges financial support through the Ramon y Cajal fellowship (RYC-2015-17482).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and Theoretical Studies on alfa-In2Se3 at High Pressure

  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Jorge-Montero, A.
  • Rodríguez-Hernández, Plácida
  • Muñoz, Alfonso
  • Errandonea, Daniel
  • Segura, Alfredo
[EN] alpha(R)-In2Se3 has been experimentally and theoretically studied under compression at room temperature by means of X-ray diffraction and Raman scattering measurements as well as by ab initio total-energy and lattice-dynamics calculations. Our study has confirmed the alpha (R3m) -> beta' (C2/m) ? beta (R (3) over barm) sequence of pressure-induced phase transitions and has allowed us to understand the mechanism of the monoclinic C2/m to rhombohedral R (3) over barm phase transition. The monoclinic C2/m phase enhances its symmetry gradually until a complete transformation to the rhombohedral R (3) over barm structure is attained above 10-12 GPa. The second-order character of this transition is the reason for the discordance in previous measurements. The comparison of Raman measurements and lattice-dynamics calculations has allowed us to tentatively assign most of the Raman-active modes of the three phases. The comparison of experimental results and simulations has helped to distinguish between the different phases of In2Se3 and resolve current controversies., The authors acknowledge financial support from Spanish government MINECO, the Spanish Agencia Estatal de Investigacion (AEI), and Fondo Europeo de Desarrollo Regional (FEDER) under Grants No. MAT2016-75586-C4-1/2/3-P and MAT2015-71070-REDC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-Driven Isostructural Phase Transition in InNbO4: In Situ Experimental and Theoretical Investigations

  • Garg, Alka B.
  • Errandonea, Daniel
  • Popescu, Catalin
  • Martínez-García, Domingo
  • Pellicer Porres, Julio
  • Rodríguez-Hernández, Plácida
  • Muñoz, Alfonso
  • Botella, Pablo
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] The high-pressure behavior of technologically important visible-light photocatalytic semiconductor In.NbO4, adopting a monoclinic wolframite-type structure at ambient conditions, was investigated using synchrotron-based X-ray diffraction, Raman spectroscopic measurements, and first-principles calculations. The experimental results indicate the occurrence of a pressure-induced isostructural phase transition in the studied compound beyond 10.8 GPa. The large volume collapse associated with the phase transition and the coexistence of two phases observed over a wide range of pressure shows the nature of transition to be first-order. There is an increase in the oxygen anion coordination number around In and Nb cations from six to eight at the phase transition. The ambient-pressure phase has been recovered on pressure release. The experimental pressure volume data when fitted to a Birch-Murnaghan equation of states yields the value of ambient pressure bulk modulus as 179(2) and 231(4) GPa for the low and high-pressure phases, respectively. The pressure dependence of the Raman mode frequencies and Gruneisen parameters was determined for both phases by experimental and theoretical methods. The same information is obtained for the infrared modes from first-principles calculations. Results from theoretical calculations corroborate the experimental findings. They also provide information on the compressibility of interatomic bonds, which is correlated with the macroscopic properties of InNbO4., This research was supported by the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under Grant Nos. MAT2013-46649-004-01/02/03-P, MAT2016-75586-C4-1/2/3-P, and MAT2015-71070-REDC (MALTA Consolider). J.A.S. acknowledges financial support through the Ramon y Cajal Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure lattice-dynamics of NdVO4

  • Panchal, V.
  • Errandonea, D.
  • Manjón, F. J.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Achary, S.N.
  • Tyagi, A.K.
High-pressure Raman-scattering measurements and ab initio calculations on NdVO4 have been carried out up to 30 GPa. Our combined experimental and theoretical study confirms that beyond 5.9 GPa NdVO4 undergoes an irreversible zircon to monazite transition. The coexistence of zircon and monazite phases is experimentally observed up to ~8 GPa (which agrees with the theoretical transition pressure), stabilizing the monazite phase as a single phase around 10 GPa. Calculations additionally predict the existence of a second high-pressure phase transition at 12.4 GPa. This reversible phase transition has been experimentally observed beyond 18.1 GPa and remains stable up to 30 GPa. The post-monazite phase is predicted to have a monoclinic structure isomorphic to the BaWO4-II type structure. The calculated structure for the three polymorphs of NdVO4 is reported and the pressure dependence of their Raman modes is discussed., The authors thank the financial support provided by the Spanish government MINECO under Grants no: MAT2013-46649-C4-1/2/3 and MAT2015-71070-REDC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and High-Pressure Study of Corundum-Type In2O3

  • García-Domene, B.
  • Sans Tresserras, Juan Ángel
  • Ovsyannikov, Sergey V.
  • Dubrovinsky, L.S.
  • Martinez-Garcia, D.
  • Gomis, O.
  • Errandonea, D.
  • Moutaabbid, H.
  • Le Godec, Y.
  • Ortiz, H.M.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Popescu, C.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
This work reports the high-pressure and high-temperature (HP-HT) synthesis of pure rhombohedral (corundum-type) phase of indium oxide (In2O3) from its most stable polymorph, cubic bixbyite-type In2O3, using a multianvil press. Structural and vibrational properties of corundum-type In2O3 (rh-In2O3) have been characterized by means of angle-dispersive powder X-ray diffraction and Raman scattering measurements at high pressures which have been compared to structural and lattice dynamics ab initio calculations. The equation of state and the pressure dependence of the Raman-active modes of the corundum-type phase are reported and compared to those of corundum (α-Al2O3). It can be concluded that rh-In2O3 is stable under compression up to 14 GPa and it gradually transforms to the orthorhombic Rh2O3−III structure with Pbca space group (N. 61) between 14 and 26 GPa. The bulk modulus, axial compressibilities, and the pressure range of stability of the corundumtype phase in group IIIA sesquioxides A2O3 (A = Al, Ga, and In) are discussed., This work is supported by the Spanish MICINN Projects MAT2013-46649-C4-1/2/3-P, CSD2007-00045, and MAT2015-71070-REDC and by the Generalitat Valenciana under Projects GV06/151 and ACOMP/2014/243. A.M. and P.R-H. want to thank computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. B.G.-D. and J.A.S. acknowledge financial support through the FPI program and Juan de la Cierva fellowship, respectively. S.V.O. acknowledges the financial support of the Deutsche Forschungsgemeinschaft (DFG) under Project OV-110/1-2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural, Vibrational, and Electronic Study of Sb2S3 at High Pressure

  • Ibáñez, Jordi
  • Sans-Tresserras, Juan Ángel
  • Popescu, Catalin
  • López-Vidrier, J.
  • Elvira-Betanzos, J.J.
  • Cuenca Gotor, Vanesa Paula
  • Gomis, O.
  • Rodríguez-Hernández, P.
  • Muñoz, Alfonso
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
Antimony trisulfide (Sb2S3), found in nature as the mineral stibnite, has been studied under compression at room temperature from a joint experimental and theoretical perspective. X-ray diffraction and Raman scattering measurements are complemented with ab initio total-energy, lattice-dynamics, and electronic structure calculations. The continuous changes observed in the volume, lattice parameters, axial ratios, bond lengths, and Raman mode frequencies as a function of pressure can be attributed to the different compressibility along the three orthorhombic axes in different pressure ranges, which in turn are related to the different compressibility of several interatomic bond distances in different pressure ranges. The structural and vibrational properties of Sb2S3 under compression are compared and discussed in relation to isostructural Bi2S3 and Sb2Se3. No first-order phase transition has been observed in Sb2S3 up to 25 GPa, in agreement with the stability of the Pnma structure in Bi2S3 and Sb2Se3 previously reported up to 50 GPa. Our measurements and calculations do not show evidence either for a pressure-induced second-order isostructural phase transition or for an electronic topological transition in Sb2S3., This work has been performed under financial support from Spanish MINECO under Projects MAT2013-46649-C4-2/3-P and MAT2015-71070-REDC. This publication is fruit of "Programa de Valoracion y Recursos Conjuntos de I+D+i VLC/CAMPUS" and has been financed by the Spanish Ministerio de Educacion, Cultura y Deporte, as part of "Programa Campus de Excelencia Internacional" through Projects SP20140701 and SP20140871. These experiments were performed at BL04-MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. J.A.S. acknowledges financial support through Juan de la Cierva fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase Stability of Natural Ni0.75Mg0.22Ca0.03CO3 Gaspeite Mineral at High Pressure and Temperature

  • Chuliá-Jordán, R.
  • Santamaría Pérez, David
  • Otero-de-la-Roza, A.
  • Ruiz-Fuertes, J.
  • Marqueño, T.
  • MacLeod, S.
  • Popescu, C.
  • Gomis, O.|||0000-0001-6763-0638
[EN] Divalent metal carbonates play an important role in Earth's carbon cycle, but the effect of chemical substitution is still poorly known. In this work, we have studied the structural and vibrational properties of natural mineral gaspeite (Ni0.75Mg0.22Ca0.03CO3) under high pressure and temperature using in situ synchrotron X-ray diffraction and Raman spectroscopy in diamond-anvil cells. These experiments have been complemented by ab initio simulations. Synchrotron high-pressure XRD measurements at room temperature using He as the pressure transmitting medium have shown that the calcite-type structure is stable up to 23.3 GPa. A bulk modulus at zero pressure of B-0 = 105(2) GPa with B-0' = 7.4(3) has been obtained from the experimental equation of state. This result indicates that gaspeite is the most incompressible of all the divalent metal carbonates. The axial compressibilities in gaspeite have a high anisotropy, with the c axis about 3 times more compressible than the a axis. We have followed under pressure the Raman modes of gaspeite up to 19 GPa. Moreover, Ni0.75Mg0.22Ca0.03CO3 compressed at 5.5 GPa has been heated up to 840 K, revealing that this carbonate is stable in these conditions. The equation of state of magnesian gaspeite at this temperature has been determined. Our ab initio calculations on NiCO3 at zero pressure and 5.5 GPa have allowed us to estimate the thermal expansion coefficients. The obtained values show that the anisotropy in the thermal expansion is comparable to that found in axial compressibility., Authors thank the financial support from the Spanish Ministerio de Ciencia, Innovacion y Universidades (MICINN) under projects MALTA Consolider Ingenio 2010 network (MAT2015-71070-REDC) and PGC2018-097520-A-I00 (co-financed with EU FEDER funds) and from the Generalitat Valenciana under project PROMETEO/2018/123. D.S.-P. and A.O.R. acknowledge the financial support of the Spanish MINECO for the RyC-2014-15643 and RyC-2016-20301 Ramo ' n y Cajal Grants, respectively. C.P. and O.G. acknowledge the financial support from the Spanish Ministerio de Economia y Competitividad (MINECO projects FIS2017-83295-P and MAT2016-75586-C4-1-P/2-P, respectively). We thank David Vie for carrying out the GTA measurements. Authors also thank Dr. Nicolescu and the Mineralogy and Meteroritic Department of the Yale Peabody Museum of Natural History for providing the mineral samples and ALBA-CELLS synchrotron for providing beamtime under experiment 2018082948. A.O.R. thanks the MALTA Consolider Supercomputing Centre and Compute Canada for computational resources. British Crown Owned Copyright 2020/AWE. Published with permission of the Controller of Her Britannic Majesty's Stationery Office.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure crystal structure, lattice vibrations, and band structure of BiSbO4

  • Errandonea, Daniel
  • Muñoz, Alfonso
  • Rodríguez-Hernández, Plácida
  • Gomis, O.
  • Achary, S. Nagabhusan
  • Popescu, Catalin
  • Patwe, Sadeque J.
  • Tyagi, Avesh J.
The high-pressure crystal structure, lattice-vibrations HP crystal structure, lattice vibrations, and band , and electronic band structure of BiSbO4 were studied by ab initio simulations. We also performed Raman spectroscopy, infrared spectroscopy, and diffuse-reflectance measurements, as well as synchrotron powder X-ray diffraction. High-pressure X-ray diffraction measurements show that the crystal structure of BiSbO4 remains stable up to at least 70 GPa, unlike other known MTO4-type ternary oxides. These experiments also give information on the pressure dependence of the unit-cell parameters. Calculations properly describe the crystal structure of BiSbO4 and the changes induced by pressure on it. They also predict a possible high-pressure phase. A room-temperature pressure volume equation of state is determined, and the effect of pressure on the coordination polyhedron of Bi and Sb is discussed. Raman- and infrared-active phonons were measured and calculated. In particular, calculations provide assignments for all the vibrational modes as well as their pressure dependence. In addition, the band structure and electronic density of states under pressure were also calculated. The calculations combined with the optical measurements allow us to conclude that BiSbO4 is an indirect-gap semiconductor, with an electronic band gap of 2.9(1) eV. Finally, the isothermal compressibility tensor for. BiSbO4 is given at 1.8 GPa. The experimental (theoretical) data revealed that the direction of maximum compressibility is in the (0 1 0) plane at similar to 33 degrees (38 degrees) to the c-axis and 47 degrees (42 degrees) to the a-axis. The reliability of the reported results is supported by the consistency between experiments and calculations., Research supported by the Spanish government MINECO under Grant Nos. MAT2013-46649-C4-1/2/3-P and MAT2015-71070-REDC. We also acknowledge the computer time provided by MALTA cluster and the Red Espanola de Supercomputacion. Experiments were performed at MSPD beamline at ALBA Synchrotron Light Facility with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elastic and thermodynamic properties of alpha-Bi2O3 at high pressures: Study of mechanical and dynamical stability

  • Gomis, O.|||0000-0001-6763-0638
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Rodríguez-Hernández, Plácida
  • MUÑOZ, ALFONSO
[EN] The elastic and thermodynamic properties of the monoclinic polymorph of bismuth oxide (alpha-Bi2O3); aka mineral bismite, have been theoretically investigated both at room pressure and under hydrostatic compression by means of first principles calculations based on density functional theory. In this work, the elastic stiffness coefficients, elastic moduli, Poisson's ratio, B/G ratio, elastic anisotropy indexes (A(B), A(G), A(1), A(2), A(3), Au) and directional dependence of Young modulus and linear compressibility have been obtained. Vickers hardness, and sound wave velocities have been calculated. Our simulations show that bismite has a high elastic anisotropy. alpha-Bi2O3 is a ductile material whose elastic anisotropy increases under compression and presents a stronger ability to resist volume compression than shear deformation at all pressures. Besides, it has a very small minimum thermal conductivity, which is well suited for thermoelectric applications. Finally, the mechanical and dynamical stability of bismite at high pressure has been studied and it has been found that alpha-Bi2O3 becomes mechanically unstable at pressures beyond 19.3 GPa and dynamically unstable above 11.5 GPa. These instabilities could be responsible for the amorphization of bismite observed experimentally between 15 and 20 GPa., This research was supported by the Spanish Ministerio de Economia y Competitividad under Projects MAT2016-75586-C4-2-P/3-P and MAT2015-71070-REDC. P.R.-H. and A.M. acknowledge Red Espanola de SupercomputaciOn (RES) and MALTA-Cluster for the computing time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and electrical study of the topological insulator SnBi2Te4 at high pressures

  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Sans Tresserras, Juan Ángel
  • Andrada-Chacón, A.
  • Sánchez-Benitez, J.
  • Popescu, C.
  • Gomis, O.
  • Pereira, A. L. J.
  • García-Domene, B.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Daisenberger, D.
  • Oeckler, O.
We report high-pressure X-ray diffraction and electrical measurements of the topological insulator SnBi2Te4 at room temperature. The pressure dependence of the structural properties of the most stable phase of SnBi2Te4 at ambient conditions (trigonal phase) have been experimentally determined and compared with results of our ab initio calculations. Furthermore, a comparison of SnBi2Te4 with the parent compound Bi2Te3 shows that the central TeSnTe trilayer, which substitutes the Te layer at the center of the TeBiTeBiTe layers of Bi2Te3, plays a minor role in the compression of SnBi2Te4. Similar to Bi2Te3, our resistance measurements and electronic band structure simulations in SnBi2Te4 at high pressure suggest that this compound exhibits a pressure-induced electronic topological transition or Lifshitz transition between 3.5 and 5.0 GPa. (C) 2016 Published by Elsevier B.V., We thank Dr. Philipp Urban for preparing the sample. This work has been performed under financial support from Spanish MINECO under projects MAT2013-46649-C4-2-P, MAT2015-71070-REDC and CTQ2015-67755-C2-1-R and from Spanish Ministerio de Educacion, Cultura y Deporte as part of "Programa Campus de Excelencia Internacional/Programa de Valoracion y Recursos Conjuntos de I + D + i VLC/CAMPUS" through projects SP20140701 and SP20140871. One of the experiments were performed at MSPD-BL04 beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.A.S. thanks "Juan de la Cierva" fellowship program for funding. A. A.-C. and J.S.-B. are also grateful to Spanish MINECO for the FPI (BES-2013-066112) and Ramon y Cajal (RyC-2010-06276) fellowships. We acknowledge Diamond Light Source for time on beamline I15 under Proposal EE9102.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vibrational properties of CdGa2S4 at high pressure

  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Gomis, O.|||0000-0001-6763-0638
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Luna Molina, Ramón|||0000-0001-8792-7578
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Ortiz, H.M.
  • Perez-Gonzalez, E.
  • Rodríguez-Hernández, Plácida
  • MUÑOZ, ALFONSO
  • URSAKI, VEACHESLAV
  • TIGINYANU, IVAN
[EN] Raman scattering measurements have been performed in cadmium digallium sulphide (CdGa2S4) with defect chalcopyrite structure up to 25 GPa in order to study its pressure-induced phase transitions. These measurements have been complemented and compared with latticedynamics ab initio calculations including the TO-LO splitting at high pressures in order to provide a better assignment of experimental Raman modes. In addition, experimental and theoretical Gruneisen parameters have been reported in order to calculate the molar heat capacity and thermal expansion coefficient of CdGa2S4. Our measurements provide evidence that CdGa2S4 undergoes an irreversible phase transition above 15 GPa to a Raman-inactive phase, likely with a disordered rock salt structure. Moreover, the Raman spectrum observed on downstroke from 25 GPa to 2 GPa has been attributed to a new phase, tentatively identified as a disordered zinc blende structure, that undergoes a reversible phase transition to the Raman-inactive phase above 10 GPa. Published under license by AIP Publishing., The authors thank the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) under Grant Nos. MAT2016-75586-C4-2/3-P and MAT2015-71070-REDC (MALTA Consolider) and the Generalitat Valenciana under Project No. PROMETEO/2018/123-EFIMAT. E. P.-G., A. M., and P. R.-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vibrational and elastic properties of As4O6 and As4O6·2He at high pressures: Study of dynamical and mechanical stability

  • Cuenca Gotor, Vanesa Paula
  • Gomis, O.
  • Sans-Tresserras, Juan Ángel
  • Rodríguez Hernández, P.
  • Muñoz, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
The formation of a new compound with stoichiometry As4O62He at relatively low pressure (3 GPa) has been recently reported when arsenolite (As4O6) powder is compressed with helium as a pressure-transmitting medium. In this work, we study the lattice dynamics of As4O6 and As4O62He at high pressures from an experimental and theoretical perspective by means of Raman scattering measurements and ab initio calculations and report the theoretical elastic properties of both compounds at high pressure. Raman scattering measurements show a completely different behaviour of As4O6 and As4O62He at high pressures. Furthermore, the theoretical calculation of phonon dispersion curves and elastic stiffness coefficients at high pressure in both compounds allow us to discuss their dynamical and mechanical stability under hydrostatic compression. Both compounds are dynamically stable even above 35 GPa, but As4O6 becomes mechanically unstable at pressures beyond 19.7 GPa. These results allow explaining the pressure-induced amorphization of As4O6 found experimentally above 15–20 GPa and the lack of observation of any instability in As4O62He up to the highest studied pressure (30 GPa)., This study was supported by the Spanish Ministerio de Economia y Competitividad under Projects MAT2013-46649-C4-2-P/3-P, MAT2015-71070-REDC and MAT2016-75586-C4-2-P/4-P. A.M. and P.R.-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. J.A.S. acknowledges finnancial support from "Ramon y Cajal" fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-induced phase transition and band-gap collapse in the wide-band-gap semiconductor InTaO4

  • Errandonea, Daniel
  • Popescu, Catalin
  • Garg, A.B.
  • Botella, P.
  • Martinez García, D.
  • Pellicer Porres, J.
  • Rodríguez Hernández, P.
  • Muñoz, A.
  • Cuenca Gotor, Vanesa Paula
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
A pressure-induced phase transition, associated with an increase of the coordination number of In and Ta, is detected beyond 13 GPa in InTaO4 by combining synchrotron x-ray diffraction and Raman measurements in a diamond-anvil cell with ab initio calculations. High-pressure optical-absorption measurements were also carried out. The high-pressure phase has a monoclinic structure that shares the same space group with the low-pressure phase (P2/c). The structure of the high-pressure phase can be considered as a slight distortion of an orthorhombic structure described by space group Pcna. The phase transition occurs together with a unit-cell volume collapse and an electronic band-gap collapse observed by experiments and calculations. Additionally, a band crossing is found to occur in the low-pressure phase near 7 GPa. The pressure dependence of all the Raman-active modes is reported for both phases as well as the pressure dependence of unit-cell parameters and the equations of state. Calculations also provide information on infrared-active phonons and bond distances. These findings provide insights into the effects of pressure on the physical properties of InTaO4., This paper was partially supported by the Spanish Ministerio de Economia y Competitividad (MINECO) under Grants No. MAT2013-46649-C04-01/02/03 and No. MAT2015-71070-REDC (MALTA Consolider). The XRD experiments were performed at the MSPD-BL04 beamline at ALBA Synchrotron with the collaboration of ALBA staff. We thank S. Agouram from SC-SIE at Universitat de Valencia for technical support with the transmission electron microscope measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

X-ray nanoimaging of Nd3+ optically active ions embedded in Sr0.5Ba0.5Nb2O6 nanocrystals

  • Martínez-Criado, G.
  • Alén, Benito
  • Lozano-Gorrín, A.D.
  • Haro-González, P.
  • Martin, I.R.
  • Lavin, V.
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] The spatial distribution of Sr0.5Ba0.5Nb2O6 nanocrystals is analyzed in a borate-based glass-ceramic by a synchrotron hard X-ray nanoimaging tool. Based on X-ray excited optical luminescence, we examined 2D projections of the Nd3+ optically active ions in the Sr0.5Ba0.5Nb2O6 nanocrystals, as well as in the glassy phase where they are embedded. Our findings reveal areas of agglomerations and/or clusters of nanocrystals ascribed to the diffusion coefficients of their constituent elements. They are characterized by high Nd3+ concentrations that may act as heterogeneous agents for the nucleation and growth of these nanocrystals. (C) 2017 Optical Society of America, MINECO, EU-FEDER and CSIC through the projects MAT2013-46649-C4-4-P, MAT201571070-REDC, MAT2016-75586-C4-2-P, MAT2016-75586-C4-4-P, 201550I021 and 201660I001, respectively. JAS acknowledges the Spanish Program Ramón y Cajal for his fellowship. We also thank the ESRF for the beam time allocated and experimental facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure structural, elastic, and thermodynamic properties of zircon-type HoPO4 and TmPO4

  • Gomis, O.|||0000-0001-6763-0638
  • Lavina, B.
  • Rodriguez-Hernandez, P.
  • Muñoz, A.
  • Errandonea, R.
  • Errandonea, Daniel
  • Bettinelli, M.
[EN] Zircon-type holmium phosphate (HoPO4) and thulium phosphate (TmPO4) have been studied by single-crystal x-ray diffraction and ab initio calculations. We report on the influence of pressure on the crystal structure, and on the elastic and thermodynamic properties. The equation of state for both compounds is accurately determined. We have also obtained information on the polyhedral compressibility which is used to explain the anisotropic axial compressibility and the bulk compressibility. Both compounds are ductile and more resistive to volume compression than to shear deformation at all pressures. Furthermore, the elastic anisotropy is enhanced upon compression. Finally, the calculations indicate that the possible causes that make the zircon structure unstable are mechanical instabilities and the softening of a silent B-1u mode., This research is partially supported by the Spanish government MINECO under Grants No: MAT2016-75586-C4-1-P/2-P/3-P, MAT2013-46649-C4-1-P/2-P/3-P and MAT2015-71070-REDC. A.M. and P.R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. This work was also partially supported by the National Nuclear Security Administration under the Stewardship Science Academic Alliances program through DOE Cooperative Agreement No. DE-NA0001982. Part of this work was conducted at HPCAT (Sector 16), Advanced Photon Source (APS), Argonne National Laboratory and at the Advanced Light Source (ALS), Lawrence Berkeley National Laboratory (LBNL). HPCAT operations are supported by DOE-NNSA under Award No. DE-NA0001974 and DOE-BES under Award No. DE-FG02-99ER45775, with partial instrumentation funding by NSF. APS is supported by DOE-BES, under Contract No. DE-AC02-06CH11357. The ALS is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758 and by GSECARS through NSF grant EAR-1128799 and DOE grant DE-FG02-94ER14466.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural, Vibrational, and Elastic Properties of Yttrium Orthoaluminate Nanoperovskite at High Pressures

  • Hernández-Rodríguez, M.A.
  • Monteseguro, V.
  • Lozano-Gorrín, A.D.
  • González-Platas, J.
  • Rodríguez-Hernández, Plácida
  • Muñoz, Alfonso
  • Lavin, V.
  • Martín, I.R.
  • Rodriguez-Mendoza, U.R.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] The structural and vibrational properties of nanocrystalline yttrium orthoaluminate perovskite (YAlO3) under compression have been experimentally studied. Experimental results have been compared to ab initio simulations of. bulk YAlO3, in the framework of the density functional theory. Furthermore, they have been complemented with an ab initio study of its elastic properties at different pressures. Calculated total and partial phonon density of states have allowed us to understand the contribution of the different atoms and structural units, YO12 dodecahedra and AlO6 octahedra, to the vibrational modes. The calculated infrared-active modes and their pressure dependence are also reported. Finally, the pressure dependences of the, elastic constants and the mechanical stability of the perovskite structure have been analyzed in detail, showing that this phase is mechanically stable until 92 GPa. In fact, experimental results up to 30 GPa show no evidence of any phase transition. A previously proposed possible phase transition in YAlO3 above 80 GPa is also discussed., This research was partially supported by MINECO (MAT2013-46649-C4-2/3/4-P, MAT2015-71070-REDC, and MAT2016-75586-C4-2/3/4-P) and by EU-FEDER funds. M.A.H.-R. thanks MINECO for an FPI grant (BES-2014-068666).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of graphene oxide-modified electrodeposited ZnO/Cu2O heterojunction solar cells, Rendimiento de las celdas solares de heterounión ZnO/Cu2O modificadas con óxido de grafeno

  • Rosas-Laverde, Nelly Maria
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Cembrero Cil, Jesús
  • Orozco-Messana, Javier|||0000-0001-8611-8816
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] We report the fabrication of ZnO/Cu2O heterojunction solar cells by means of the electrodeposition technique. The effect of electrolyte medium for the ZnO deposition, annealing treatment and interface modification with graphene oxide (GO) layer on the photoelectrical properties was analyzed. The electrochemical results indicated a markedly dependent Cu2O film electrodeposition on the GO-modified ZnO films. The modification of ZnO/Cu2O interface with GO nanosheets and annealing treatment results in improved interface properties, varying morphology and defects in ZnO lattice that further lead to enhanced performance of the proposed heterojunction solar cells. While the obtained results indicate that the properties of GO coating need to be tailored for improved performance, a synergetic effect of the GO addition and annealing treatment on the photoelectric properties of the electrodeposited heterojunction is achieved. (C) 2019 SECV. Published by Elsevier Espana, S.L.U., [ES] Se presenta la fabricación de celdas solares de heterounión de ZnO/Cu2O obtenidas mediante la técnica de electrodeposición. Se analizó el efecto del electrolito utilizado para la deposición de ZnO, el tratamiento térmico aplicado y la modificación de la interfaz con una capa de óxido de grafeno (GO) sobre las propiedades fotoeléctricas. Los resultados electroquímicos indicaron que existe una marcada dependencia de electrodeposición de capa de Cu2O sobre las películas de ZnO modificadas con GO. La modificación de la interfaz ZnO/Cu2O con nanohojas de GO y el tratamiento térmico dan como resultado mejoras en las propiedades de la interfaz, una morfología variable y defectos en la red de ZnO que conducen a un mejor rendimiento de las celdas solares de heterounión propuestas. Si bien los resultados obtenidos indican que las propiedades del recubrimiento de GO deben adaptarse para mejorar el rendimiento, se logra un efecto sinérgico del tratamiento de adición y térmico de GO aplicados sobre las propiedades fotoeléctricas de la heterounión electrodepositada., Financial support from Escuela Politécnica Nacional (project number PIMI 15-09), Secretaría de Educación Superior, Ciencia, Tecnología e Innovación (SENESCYT) of Ecuador, Romanian National Authority for Scientific Research and Innovation CNCS ¿ UEFISCDI (project number PN-III-P1-1.1-TE-2016-1544), Spanish government MINECO (projects MAT2016-75586-C4-2-P and MAT2015-71070-REDC) and from Generalitat Valenciana (project PROMETEO 2018/123 ¿ EFIMAT) is gratefully acknowledged. In addition, authors would like to thank to the Microscopy Service of UPV and Dr. David Busquets-Mataix for useful advice.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and Theoretical Study of SbPO4 under Compression

  • Pereira, André Luis de Jesus
  • Santamaria-Pérez, David
  • Errandonea, Daniel
  • Popescu, Catalin
  • Da Silva, Estelina Lora
  • Rodríguez-Carvajal, Juan
  • Muñoz, Alfonso
  • Rodríguez-Hernández, Plácida
  • Mujica, Andres
  • Radescu, Silvana Elena
  • Beltrán, Armando
  • Otero-de-la-Roza, Alberto
  • Nalin, Marcelo
  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Mollar García, Miguel Alfonso|||0000-0003-4315-0407
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] SbPO4 is a complex monoclinic layered material characterized by a strong activity of the nonbonding lone electron pair (LEP) of Sb. The strong cation LEP leads to the formation of layers piled up along the a axis and linked by weak SbO electrostatic interactions. In fact, Sb has 4-fold coordination with O similarly to what occurs with the P-O coordination, despite the large difference in ionic radii and electronegativity between both elements. Here we report a joint experimental and theoretical study of the structural and vibrational properties of SbPO4 at high pressure. We show that SbPO4 is not only one of the most compressible phosphates but also one of the most compressible compounds of the ABO(4) family. Moreover, it has a considerable anisotropic compression behavior, with the largest compression occurring along a direction close to the a axis and governed by the compression of the LEP and the weak interlayer Sb-O bonds. The strong compression along the a axis leads to a subtle modification of the monoclinic crystal structure above 3 GPa, leading from a 2D to a 3D material. Moreover, the onset of a reversible pressure-induced phase transition is observed above 9 GPa, which is completed above 20 GPa. We propose that the high-pressure phase is a triclinic distortion of the original monoclinic phase. The understanding of the compression mechanism of SbPO4 can aid to improve the ion intercalation and catalytic properties of this layered compound., The authors acknowledge financial support from the Brazilian Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq - 159754/2018-6, 307199/2018-5, 422250/20163, 201050/2012-9), FAPESP (2013/07793-6), Spanish Ministerio de Economia y Competitividad (MINECO) under projects MALTA Consolider Ingenio 2010 network (MAT2015-71070-REDC and RED2018-102612-T), MAT2016-75586-C4-1/2/3-P, PGC2018-097520-A-I00, FIS2017-83295-P, and PGC2018-094417-B-I00 from Generalitat Valenciana under project PROMETEO/2018/123, and the European Comission under project COMEX. D.S.-P., JA.S., and A.O.d.l.R. acknowledge "Ramim y Cajal" Fellowships for financial support (RyC-2014-15643, RYC-2015-17482, and RyC-2016-20301, respectively). E.L.d. S., A.M., A.B., and P.R-.H. acknowledge computing time provided by Red Espanola de SupercomputaciOn (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ordered helium trapping and bonding in compressed arsenolite: Synthesis of As4O6 2He

  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Popescu, Catalin
  • Cuenca Gotor, Vanesa Paula
  • Gomis, Oscar
  • Muñoz, Alfonso
  • Rodríguez Hernández, Plácida
  • Contreras García, Julia
  • Pellicer Porres, Julio
  • Pereira, A.L.J.
  • Santamaría Pérez, David
  • Segura, Alfredo
Compression of arsenolite has been studied from a joint experimental and theoretical point of view. Experiments on this molecular solid at high pressures with different pressure-transmitting media have been interpreted thanks to state-of-the-art ab initio calculations. Our results confirm arsenolite as one of the most compressible minerals and provide evidence for ordered helium trapping above 3 GPa between adamantane-type As4O6 cages. Our calculations indicate that, at relatively small pressures, helium establishes rather localized structural bonds with arsenic forming a compound with stoichiometry As4O6 center dot 2He. All properties of As4O6 center dot 2He are different from those of parent As4O6. In particular, pressure-induced amorphization, which occurs in arsenolite above 15 GPa, is impeded in As4O6 center dot 2He, thus resulting in a mechanical stability of As4O6 center dot 2He beyond 30 GPa. Our work paves the way to explore the formation of alternative compounds by pressure-induced trapping and reaction of gases, small atomic or molecular species, in the voids of molecular solids containing active lone electron pairs., We acknowledge financial support from the Spanish Consolider Ingenio 2010 Program (Project No. MAT2015-71070-REDC). The work was also supported by Spanish MINECO under Projects No. MAT2014-46649-C4-1/2/3-P and from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia under Projects No. SP20140701 and No. SP20140871. Supercomputer time has been provided by the Red Espanola de Supercomputacion (RES) and the MALTA cluster. J.A.S. acknowledges Juan de la Cierva fellowship program for his financial support. A.M. and P.R.-H. acknowledge S. Munoz Rodriguez for providing them with a data parsing application. A.L.J.P. acknowledges financial support through Brazilian CNPq (Project No. 201050/2012-9).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Ultrahigh CO2-Loaded Silicalite-1 Zeolite: Structural Stability and Physical Properties at High Pressures and Temperatures

  • Marqueno, Tomas
  • Santamaria-Perez, David
  • Ruiz-Fuertes, Javier
  • Chulia-Jordan, Raquel
  • McGuire, Chris
  • Kavner, Abby
  • MacLeod, Simon
  • Daisenberger, Dominik
  • Popescu, Catalin
  • Rodríguez-Hernández, Plácida
  • Munoz, Alfonso
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] We report the formation of an ultrahigh CO2-loaded pure-SiO2, silicalite-1 structure at high pressure (0.7 GPa) from the interaction of empty zeolite and fluid CO, medium. The CO2-filled structure was characterized in situ by means of synchrotron powder X-ray diffraction. Rietveld refinements and Fourier recycling allowed the location of 16 guest carbon dioxide molecules per unit cell within the straight and sinusoidal channels of the porous framework to be analyzed. The complete filling of pores by CO, molecules favors structural stability under compression, avoiding pressure-induced amorphization below 20 GPa, and significantly reduces the compressibility of the system compared to that of the parental empty one. The structure of CO2-loaded silicalite-1 was also monitored at high pressures and temperatures, and its thermal expansivity was estimated., The authors thank the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their financial support (MAT2016-75586-C4-1-P, MAT2016-75586-C4-3-P, MAT2015-71842-P; Severo Ochoa SEV-2012-0267; and MAT2015-71070-REDC (MALTA Consolider)). D.S.-P. and J.R-F. acknowledge MINECO for a Ramon y Cajal (RyC-2014-15643) and a Juan de la Cierva (IJCI-2014-20513) contract, respectively. A.K. acknowledges the support of the University of Valencia through the Grant UV-INV-EPC17-548561. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), and Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation, Earth Sciences (EAR-1128799), and the Department of Energy, GeoSciences (DE-FG02-94ER14466). This research used resources from the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory (DE-AC02-06CH11357). Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758. CO2 gas was also loaded at Diamond Light Source. The authors thank the synchrotron facility ALBA-CELLS for beamtime allocation at MSPD line.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the upconversion emission of yttrium orthoaluminate nanoperovskite co-doped with Er3+/Yb3+ ions for thermal sensing applications

  • Hernández-Rodríguez, M.A.
  • Lozano-Gorrín, A.D.
  • Lavin, V.
  • Rodriguez-Mendoza, U.R.
  • Martin, I.R.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] The upconversion emissions of yttrium orthoaluminate nano-perovskite co-doped with Er3+/Yb3+ have been studied. Strong green and red upconversion emissions, which can be observed by naked eyes, were observed when exciting the sample at 980 nm. In particular, the green band was monitored as a function of temperature and the obtained results suggest that this nano-perovskite can be used as an optical temperature sensor by exciting in the infrared range. The viability of YAP: Er3+/Yb3+ nano-perovskite in laser heating applications has been tested and discussed., This research was partially supported MINECO (MAT2013-46649-C4-2/4-P, MAT2015-71070-REDC, and MAT2016-75586-C4-2/4-P), and by the EU-FEDER. M.A. Hernández-Rodríguez thanks to MINECO for FPI grant (BES-2014-068666).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arsenolite: a quasi-hydrostatic solid pressure transmitting medium

  • Sans-Tresserras, Juan Ángel
  • Manjón, F. J.
  • Popescu, C.
  • Muñoz, A.
  • Rodríguez-Hernández, P.
  • Jordá, J. L.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
This study reports the experimental characterization of the hydrostatic properties of arsenolite (As4O6), a molecular solid which is one of the softest minerals in the absence of hydrogen bonding. The high compressibility of arsenolite and its stability up to 15GPa have been proved by x-ray diffraction measurements, and the progressive loss of hydrostaticity with increasing pressure up to 20GPa has been monitored by ruby photoluminescence. Arsenolite has been found to exhibit hydrostatic behavior up to 2.5GPa and a quasi-hydrostatic behavior up to 10GPa at room temperature. This result opens the way to explore other molecular solids as possible quasi-hydrostatic pressure-transmitting media. The validity of arsenolite as an insulating, stable, non-penetrating and quasi-hydrostatic medium is explored by the study of the x-ray diffraction of zeolite ITQ-29 at high pressure., This work has been performed with financial support from Spanish MINECO under projects MAT2013-46649-C4-2/3-P and MAT2015-71070-REDC. JAS acknowledges the 'Ramon y Cajal' fellowship program for financial support. We also thank D Calatayud, J J Garcia, T M Godoy, A Zapata, and A Cuenca for fruitful discussions. The authors thank ALBA light source for beam allocation at beamline MSPD. JLJ and FR acknowledge financial support through the SEV-2012-0267, Consolider Ingenio 2010-Multicat (CSD-2009-0050) and MAT2015-71842-P (MINECO/FEDER) projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lattice dynamics study of cubic Tb2O3

  • Ibanez, Jordi
  • Blazquez, Oriol
  • Hernandez, Sergi
  • Garrido, Blas
  • Rodríguez-Hernández, Plácida
  • Munoz, Alfonso
  • Velazquez, Matias
  • Veber, Philippe
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] We report a joint experimental and theoretical study of the lattice dynamics of cubic Tb2O3. Up to 16 optical Raman-active modes have been observed with polarized and unpolarized Raman scattering measurements on a high-quality Tb2O3 single crystal. The measured wavenumbers have been compared with those of other rare-earth (RE) and related sesquioxides with cubic (C-type or bixbyite) structure. First-principles calculations have allowed us to assign the symmetry of the experimentally observed Raman-active modes. Additional lattice-dynamical calculations on the related cubic RE sesquioxides Dy2O3, Gd2O3, Eu2O3, and Sm2O3 indicate that the phonon wavenumbers of the Raman-active modes in these compounds are monotonically reduced with increasing the lattice parameter along the Dy2O3-Tb2O3-Gd2O3-Eu2O3-Sm2O3 series, thus prompting for a revision of the experimental Raman spectra of some of these compounds (mainly Eu2O3 but also Gd2O3)., This study was supported by the Spanish Ministerio de Economía y Competitividad under Projects MAT2015-71070-REDC, MAT2015-71035-R, MAT2016-75586-C4-2-P/3-P, and FIS2017-2017-83295-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure Impact on the Stability and Distortion of the Crystal Structure of CeScO3

  • Errandonea, Daniel
  • Santamaria-Perez, David
  • Martinez-Garcia, Domingo
  • Gomis, O.
  • Shukla, Rakesh
  • Achary, S. Nagabhusan
  • Tyagi, Avesh K.
  • Popescu, Catalin
[EN] The effects of high pressure on the crystal structure of orthorhombic (Pnma) perovskite-type cerium scandate were studied in situ under high pressure by means of synchrotron X-ray powder diffraction, using a diamond-anvil cell. We found that the perovskite-type crystal structure remains stable up to 40 GPa, the highest pressure reached in the experiments. The evolution of unit-cell parameters with pressure indicated an anisotropic compression. The room-temperature pressure¿volume equation of state (EOS) obtained from the experiments indicated the EOS parameters V0 = 262.5(3) Å3 , B0 = 165(7) GPa, and B0¿ = 6.3(5). From the evolution of microscopic structural parameters like bond distances and coordination polyhedra of cerium and scandium, the macroscopic behavior of CeScO3 under compression was explained and reasoned for its large pressure stability. The reported results are discussed in comparison with high-pressure results from other, The authors are thankful for the financial support to this research from the Spanish Ministerio de Economia y Competitividad, the Spanish Research Agency, and the European Fund for Regional Development under Grant Nos. MAT2016-75S86-C4-1/2-P, MAT2013-46649-C4-1/2-P, and MAT2015-71070-REDC (MALTA Consolider). D.S.P. acknowledges the Spanish government for a Ramon y Cajal grant. The authors express gratitude to F. Aguado for fruitful discussions on the high-pressure behavior of perovskites. These experiments were performed at MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Borates or phosphates? That is the question

  • Contreras-García, J.
  • Izquierdo-Ruiz, F.
  • Marqués, M.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] Chemical nomenclature is perceived to be a closed topic. However, this work shows that the identification of polyanionic groups is still ambiguous and so is the nomenclature for some ternary compounds. Two examples, boron phosphate (BPO4) and boron arsenate (BAsO4), which were assigned to the large phosphate and arsenate families, respectively, nearly a century ago, are explored. The analyses show that these two compounds should be renamed phosphorus borate (PBO4) and arsenic borate (AsBO4). Beyond epistemology, this has pleasing consequences at several levels for the predictive character of chemistry. It paves the way for future work on the possible syntheses of SbBO4 and BiBO4, and it also renders previous structure field maps completely predictive, allowing us to foresee the structure and phase transitions of NbBO4 and TaBO4. Overall, this work demonstrates that quantum mechanics calculations can contribute to the improvement of current chemical nomenclature. Such revisitation is necessary to classify compounds and understand their properties, leading to the main final aim of a chemist: predicting new compounds, their structures and their transformations., This research was partially supported by Spanish MINECO (grant Nos. MAT2015-71070-REDC and MAT2016-75586-C4-2-P, and MALTA Consolider Team RED2018-102612-T) and Generalitat Valenciana (grant No. PROMETEO/2018/123-EFIMAT). J. Contreras-Garci ' a thanks CALSIMLAB (public grant No. ANR-11-LABX-0037-01), overseen by the French National Research Agency (ANR) as part of the Investissements d'Avenir program (grant No. ANR-11-IDEX-0004-02). M. Marque ' s acknowledges support from the ERC grant `Hecate' and computational resources provided by the UKCP consortium under EPSRC grant EP/P022561/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural Evolution of CO2-Filled Pure Silica LTA Zeolite under High-Pressure High-Temperature Conditions

  • Santamaria-Perez, David
  • Marqueño, Tomás
  • MacLeod, Simon
  • Ruiz-Fuertes, Javier
  • Daisenberger, Dominik
  • Chulia-Jordan, Raquel
  • Errandonea, Daniel
  • McGuire, Chris
  • Mahkluf, Adam
  • Kavner, Abby
  • Popescu, Catalin
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The crystal structure of CO2-filled pure-SiO2 LTA zeolite has been studied at high pressures and temperatures using synchrotron-based X-ray powder diffraction. Its structure consists of 13 CO2 guest molecules, 12 of them accommodated in the large alpha-cages and one in the beta-cages, giving a SiO2/CO2 stoichiometric ratio smaller than 2. The structure remains stable under pressure up to 20 GPa with a slight pressure-dependent rhombohedral distortion, indicating that pressure-induced amorphization is prevented by the insertion of guest species in this open framework. The ambient temperature lattice compressibility has been determined. In situ high-pressure resistive-heating experiments up to 750 K allow us to estimate the thermal expansivity at P approximate to 5 GPa. Our data confirm that the insertion of CO2 reverses the negative thermal expansion of the empty zeolite structure. No evidence of any chemical reaction was observed. The possibility of synthesizing a silicon carbonate at high temperatures and higher pressures is discussed in terms of the evolution of C-O and Si-O distances between molecular and framework atoms., The authors thank the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under Grant Nos. MAT2016-75586-C4-1-P, MAT2015-71842-P, Severo Ochoa SEV-2012-0267, and No.MAT2015-71070-REDC (MALTA Consolider). D.S.-P. and J.R.-F. acknowledge MINECO for a Ramon y Cajal and a Juan de la Cierva contract, respectively. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation - Earth Sciences (EAR-1128799) and Department of Energy- GeoSciences (DE-FG02-94ER14466). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758. CO<INF>2</INF> gas was also loaded at Diamond Light Source. Authors thank synchrotron ALBA-CELLS for beamtime allocation at MSPD line. British Crown Owned Copyright 2017/AWE. Published with permission of the Controller of Her Britannic Majesty's Stationery Office.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

InBO3 and ScBO3 at high pressures: an ab initio study of elastic and thermodynamic properties

  • Gomis, O.
  • Ortiz, H. M.
  • Sans Tresserras, Juan Ángel
  • Santamaría-Pérez, D.
  • Rodríguez-Hernández, P.
  • Muñoz, A.
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
We have theoretically investigated the elastic properties of calcite-type orthoborates ABO(3) (A= Sc and In) at high pressure by means of ab initio total-energy calculations. From the elastic stiffness coefficients, we have obtained the elastic moduli (B, G and E), Poisson's ratio (nu), B/G ratio, universal elastic anisotropy index (A(U)), Vickers hardness, and sound wave velocities for both orthoborates. Our simulations show that both borates are more resistive to volume compression than to shear deformation (B > G). Both compounds are ductile and become more ductile, with an increasing elastic anisotropy, as pressure increases. We have also calculated some thermodynamic properties, like Debye temperature and minimum thermal conductivity. Finally, we have evaluated the theoretical mechanical stability of both borates at high hydrostatic pressures. It has been found that the calcite-type structure of InBO3 and ScBO3 becomes mechanically unstable at pressures beyond 56.2 and 57.7 GPa, respectively. (C) 2016 Elsevier Ltd. All rights reserved., This study is supported by the Spanish MICINN projects MAT2013-46649-C4-2-P/3-P and MAT2015-71070-REDC. H.M.O., A.M., and P.R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. J.A.S. acknowledges Juan de la Cierva fellowship program for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure structural and vibrational properties of monazite-type BiPO4, LaPO4, CePO4, and PrPO4

  • Errandonea, D.
  • Gomis, O.
  • Rodríguez Hernández, Plácida
  • Muñoz, A.
  • Ruiz Fuertes, J.
  • Gupta, M.
  • Achary, S.N.
  • Hirsch, A.
  • Manjón, Francisco-Javier
  • Peters, L.
  • Roth, G.
  • Tyagi, A.K.
  • Bettinelli, Marco
[EN] Monazite-type BiPO4, LaPO4, CePO4, and PrPO4 have been studied under high pressure by ab initio simulations and Raman spectroscopy measurements in the pressure range of stability of the monazite structure. A good agreement between experimental and theoretical Raman-active mode frequencies and pressure coefficients has been found which has allowed us to discuss the nature of the Raman-active modes. Besides, calculations have provided us with information on how the crystal structure is modified by pressure. This information has allowed us to determine the equation of state and the isothermal compressibility tensor of the four studied compounds. In addition, the information obtained on the polyhedral compressibility has been used to explain the anisotropic axial compressibility and the bulk compressibility of monazite phosphates. Finally, we have carried out a systematic discussion on the high-pressure behavior of the four studied phosphates in comparison to results of previous studies., The authors are thankful for the financial support to this research from the Spanish Ministerio de Economia y Competitividad, the Spanish Research Agency, and the European Fund for Regional Development under Grant Nos: MAT2016-75586-C4-1-P/2-P/3-P and MAT2015-71070-REDC. AM and PR-H acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of High Pressure on the Crystal Structure and Vibrational Properties of Olivine-Type LiNiPO4

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Errandonea, Daniel
  • Pellicer-Porres, Julio
  • Garg, Alka B.
  • Rodríguez-Hernández, Placida
  • Muñoz, Alfonso
  • Martínez-García, Domingo
  • Raho, Rekha
  • Popescu, Catalin
[EN] In this work, we present an experimental and theoretical study of the effects of high pressure and high temperature on the structural properties of olivine-type LiNiPO4. This compound is part of an interesting class of materials primarily studied for their potential use as electrodes in lithium-ion batteries. We found that the original olivine structure (¿-phase) is stable up to 40 GPa. Above this pressure, the onset of a new phase is observed, as put in evidence by the X-ray diffraction (XRD) experiments. The structural refinement shows that the new phase (known as ß-phase) belongs to space group Cmcm. At room temperature, the two phases coexist at least up to 50 GPa. A complete conversion to the ß-phase was only obtained at high-pressure and high-temperature conditions (973 K, 6.5 GPa), as confirmed by both XRD and Raman spectroscopy. Ab initio calculations support the same structural sequence. The need of high-temperature conditions to obtain the complete transformation of the ¿-phase into the ß-phase is indicative of the existence of a kinetic barrier for the phase transition. Here, we report the evolution of crystallographic parameters as a function of pressure for both phases, comparing them with the theoretical predictions. We also discuss the influence of pressure on the polyhedral units and report room-temperature equations of state. The dependence of the Raman phonons of both phases on pressure is also studied, assigning to each phonon its respective symmetry by comparison with the results of the ab initio simulations., E.B. would like to thank the Generalitat Valenciana for his postdoctoral contract (ValI+D, APOSTD2017). This research was supported by the Spanish Ministerio de Economia y Competitividad, the Spanish Research Agency, and the European Fund for Regional Development under Grant Nos: MAT2016-75586-C4-1-P/3-P and MAT2015-71070-REDC. AM and PR-H acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. HP XRD experiments were performed at MSPD beamline at ALBA Synchrotron Light Facility with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of low-density water to high-density water structural transformation in milk during high-pressure processing

  • Guignon, Bérengère
  • Hidalgo Baltasar, Eduardo
  • Sanz Martínez, Pedro Dimas
  • Baonza, Valentín G.
  • Taravillo, M.
The objective of this research was to check whether the observed low-density water (LDW) to high-density water (HDW) transformation does take place or not in a complex aqueous system like those involved in high pressure processing of food. In-situ measurements of speed-of-sound up to 640 MPa were used for this purpose. After validation of the methodology in liquid water at 25 ºC, LDW-to-HDW transformation was also evidenced in sodium caseinate solution and milk samples. The transformation pressure was always observed at 275 MPa. Since water plays a key role in most biochemical transformations, the occurrence of a LDW-HDW transition should be taken into account for understanding the complex component interactions in milk and other related systems under pressure. Industrial relevance: Opportunities exist for the industry to use pressure as a tool for texturing dairy products. Process parameter choice to obtain a given texture is tricky due to the complexity of milk component interactions under pressure. As a main component in foods, water structural transformation under pressure should not be ignored by experts in the field, This work has been funded by the Spanish Ministry of Science and Innovation under project MALTA-Consolider Ingenio 2010 (CSD2007-00045), by the Spanish Ministry of Economy and Competitiveness under projects AGL2012-39756-C02-01/ALI, CTQ2015-67755-C2-1-R and MAT2015-71070-REDC, and by GRUPOS UCM 910481, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of the CO2 Guest Molecule on the sI Clathrate Hydrate Structure

  • Izquierdo-Ruiz, Fernando
  • Otero-de-la-Roza, Alberto
  • Contreras-García, Julia
  • Prieto-Ballesteros, Olga
  • Recio, José Manuel
This paper analyzes the structural, energetic and mechanical properties of carbon dioxide hydrate clathrates calculated using finite cluster and periodic ab initio density-functional theory methodologies. Intermolecular interactions are described by the exchange-hole dipole moment method. The stability, gas saturation energetics, guest–host interactions, cage deformations, vibrational frequencies, and equation of state parameters for the low-pressure <i>sI</i> cubic phase of the CO<sub>2</sub>@H<sub>2</sub>O clathrate hydrate are presented. Our results reveal that: (i) the gas saturation process energetically favors complete filling; (ii) carbon dioxide molecules prefer to occupy the larger of the two cages in the <i>sI</i> structure; (iii) blue shifts occur in both the symmetric and antisymmetric stretching frequencies of CO<sub>2</sub> upon encapsulation; and (iv) free rotation of guest molecules is restricted to a plane parallel to the hexagonal faces of the large cages. In addition, we calculate the librational frequency of the hindered rotation of the guest molecule in the plane perpendicular to the hexagonal faces. Our calculated spectroscopic data can be used as signatures for the detection of clathrate hydrates in planetary environments., Funding support from the Spanish MINECO under projects MAT2015-71070-REDC, CTQ2012-38599-C02-01, CTQ2015-67755-C2-2-R and ESP2014-55811-C2-1-P, and Principado de Asturias under GRUPIN14-049 project are gratefully acknowledged. Fernando Izquierdo-Ruiz thanks the MECD for a Ph.D. grant from the FPU program. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hyperbaric cold storage versus conventional refrigeration for extending the shelf-life of hake loins

  • Otero, Laura
  • Pérez-Mateos, Miriam
  • López Caballero, M. Elvira
Today, extending the shelf-life of fish, while retaining the organoleptic properties of the product, is still a challenge. To compare the effectiveness of conventional and hyperbaric cold storage in preserving fish quality, we stored Cape hake loins at 5 °C, both at atmospheric pressure and at 50 MPa. After 7 days of storage, microbial counts and total volatile basic-nitrogen content in conventionally refrigerated samples exceeded the limits recommended for consumption. By contrast, hyperbaric cold storage maintained these parameters unaltered, although it produced drip losses close to 5% and increased the shear resistance and whiteness of the raw samples by 44% and 9%, respectively. Nevertheless, after cooking, weight losses were less than half of those of the control loins and whiteness differences disappeared. Consequently, the sensorial analysis could only find moderate differences between the samples before and after hyperbaric storage. These results clearly prove that hyperbaric cold storage was more efficient than conventional refrigeration for the preservation of hake loins., This work was supported by the State Plan for Scientific and Technical Research and Innovation 2013–2016 of the Spanish Ministry of Economy and Competitiveness (MINECO) through the CONSOLIDER-Network MAT2015-71070-REDC and the project AGL2014-52825., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Industrial viability of the hyperbaric method to store perishable foods at room temperature

  • Bermejo-Prada, Ana
  • Colmant, Alexandra
  • Otero, Laura
  • Guignon, Bérengère
Preliminary studies at lab-scale have shown that hyperbaric storage at room temperature (HS-RT) allows preserving safety and quality of perishable foods for at least 15 days at moderate pressures (below 250 MPa). However, it is unclear whether this novel storage method would be feasible at larger scale. Thus, the purpose of this research was to assess the industrial viability of HS-RT. The viability factors addressed were (1) consumer perception of the stored products, (2) feasibility of the equipment design, (3) storage cost, and (4) environmental impact. The study is conducted in comparison to refrigeration for the storage of a pasteurized juice during 15 days. Results provide clear evidences of HS-RT viability for factors (1), (2) and (4) while reservations have to be expressed regarding factor (3)., This work has been funded by the Spanish Ministry of Science and Innovation under projects: AGL2007-63314/ALI and MALTA-Consolider Ingenio 2010 (CSD2007-00045), by the Spanish Ministry of Economy and Competitiveness under projects CTQ2015-67755-C2-1-R and MAT2015-71070-REDC, and by grupos UCM 910481. A. Bermejo was supported by a predoctoral grant from CSIC (JAE-PreDoc program) (JAEPre102) jointly financed by the European Social Fund (FSE 2007–2009)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hyperbaric cold storage: Pressure as an effective tool for extending the shelf-life of refrigerated mackerel (Scomber scombrus, L.)

  • Otero, Laura
  • Pérez-Mateos, Miriam
  • Holgado, Francisca
  • Márquez Ruiz, Gloria
  • López Caballero, M. Elvira
The efficacy of hyperbaric cold storage for preserving lean fish has been recently demonstrated but, to the best of our knowledge, no data exist for fatty fish. To evaluate the effect of hyperbaric cold storage on the shelf-life and quality of fatty fish, we stored Atlantic mackerel fillets at 5 °C, both at atmospheric pressure and at 50 MPa. After 12 days of hyperbaric storage, no microbial growth was observed. Thus, most counts were similar or slightly lower than those of control samples at day 0, while H2S-producing organisms and sulphite-reducing bacteria reduced under the detection limits. Moreover, no significant lipid degradation was observed. By contrast, increased microbial counts and significant lipid hydrolysis were detected in the samples stored at atmospheric pressure. Moreover, even though the protein profile was significantly altered during hyperbaric storage, most fish-quality indicators (pH, TVB-N, drip loss, water-holding capacity, and firmness after cooking) were better preserved in the mackerel samples stored at 50 MPa. These results clearly prove that hyperbaric cold storage was more efficient than conventional refrigeration for the preservation of Atlantic mackerel fillets., This work was supported by the State Plan for Scientific and Technical Research and Innovation 2013–2016 of the Spanish Ministry of Economy and Competitiveness (MINECO) through the CONSOLIDER-Network MAT2015-71070-REDC and the project AGL2014-52825-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray nanoimaging of Nd3+ optically active ions embedded in Sr0.5Ba0.5Nb2O6 nanocrystals

  • Martínez-Criado, Gema
  • Alén, Benito
  • Sans, Juan Ángel
  • Lozano-Gorrín, A. D.
  • Haro-González, P.
  • Martín, I. R.
  • Lavín, V.
The spatial distribution of Sr0.5Ba0.5Nb2O6 nanocrystals is analyzed in a borate-based glass-ceramic by a synchrotron hard X-ray nanoimaging tool. Based on X-ray excited optical luminescence, we examined 2D projections of the Nd3+ optically active ions in the Sr0.5Ba0.5Nb2O6 nanocrystals, as well as in the glassy phase where they are embedded. Our findings reveal areas of agglomerations and/or clusters of nanocrystals ascribed to the diffusion coefficients of their constituent elements. They are characterized by high Nd3+ concentrations that may act as heterogeneous agents for the nucleation and growth of these nanocrystals., MINECO, EU-FEDER and CSIC through the projects MAT2013-46649-C4-4-P, MAT2015- 71070-REDC, MAT2016-75586-C4-2-P, MAT2016-75586-C4-4-P, 201550I021 and 201660I001, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large magnetoelectric coupling near room temperature in synthetic melanostibite Mn2FeSbO6

  • Dos Santos-García, Antonio J.
  • Solana-Madruga, Elena
  • Ritter, Clemens
  • Andrada-Chacón, Adrián
  • Sánchez-Benítez, J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Sáez-Puche, Regino
  • Schmidt, Rainer
Multiferroic materials exhibit two or more ferroic orders and have potential applications as multifunctional materials in the electronics industry. A coupling of ferroelectricity and ferromagnetism is hereby particularly promising. We show that the synthetic melanostibite mineral MnFeSbO (R (Formula presented.) space group) with ilmenite-type structure exhibits cation off-centering that results in alternating modulated displacements, thus allowing antiferroelectricity to occur. Massive magnetoelectric coupling (MEC) and magnetocapacitance effect of up to 4000 % was detected at a record high temperature of 260 K. The multiferroic behavior is based on the imbalance of cationic displacements caused by a magnetostrictive mechanism, which sets up an unprecedented example to pave the way for the development of highly effective MEC devices operational at or near room temperature., The authors thank MINECO for funding through projects MAT2013‐44964‐R, MAT2013‐41099‐R, MAT2015‐71070‐REDC, MAT2014‐52405‐C02‐02, CTQ2015‐67755‐C2‐1‐R (MINECO/FEDER) and FPI (BES‐2013‐066112) and Ramon y Cajal (RyC‐2010–06276) fellowships, and Comunidad de Madrid through S‐2013/MIT‐2753 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-pressure synthesis and structural characterization of Na1-xKxMgH3 perovskite hydrides

  • Andrada-Chacón, A.
  • Alonso, J. A.
  • Pomjakushin, V.
  • Sánchez-Benítez, J.
Perovskite hydrides containing light elements are attractive for hydrogen storage. We describe a new series of composition NaKMgH (0 ≤ x ≤ 1) prepared by an original synthesis method based on the direct reaction of simple hydrides under high-pressure and high-temperature conditions. Mixtures of MgH, NaH and KH were enclosed in gold capsules and treated in a piston-cylinder hydrostatic press at moderate pressures of 2 GPa and temperatures around 775 °C. Well-crystallized hydride samples were analyzed by x-ray and neutron powder diffraction, collecting excellent patterns even in non-deuterated samples that provided an accurate description of the crystal structure features. For x ≤ 0.75 the perovskites are isostructural with GdFeO-type oxides, characterized by the same tilting scheme of the MgH octahedra. For the end-member KMgH the structure is cubic, adopting the canonical aristotype of the perovskite structure. The analysis of the tolerance factor across the series accounts for the stability of those samples in the studied compositional range., This research was supported by the MICINN and MINECO under projects MALTA-Consolider Team (CSD2007-00045, MAT2015-71070-REDC), MAT2013-41099-R and CTQ2015-67755-C2-1-R (MINECO/FEDER). A. A-C. acknowledges support from a MINECO-FPI grant (BES-2013-066112).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A compact and portable optofluidic device for detection of liquid properties and label-free sensing

  • Lahoz, F.
  • Martín, I. R.
  • Walo, D.
  • Gil-Rostra, J.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
Optofluidic lasers have been widely investigated over the last few years mainly because they can be easily integrated in sensor devices. However, high power pulse lasers are required as excitation sources, which, in practice, limit the portability of the system. Trying to overcome some of these limitations, in this paper we propose the combined use of a small CW laser with a Fabry-Perot optofluidic planar microcavity showing high sensitivity and versatility for detection of liquid properties and label-free sensing. Firstly, a fluorescein solution in ethanol is used to demonstrate the high performances of the FP microcavity as a temperature sensor both in the laser (high pump power above laser threshold) and in the fluorescence (low pump power) regimes. A shift in the wavelength of the resonan cavity modes is used to detect changes in the temperature and our results show that high sensitivities could be already obtained using cheap and portable CW diode lasers. In the second part of the paper, the demonstration of this portable device for label-free sensing is illustrated under low CW pumping. The wavelength positions of the optofluidic resonant modes are used to detect glucose concentrations in water solutions using a protein labelled with a fluorescent dye as the active medium., This research was supported by European Regional Development Funds program (EU-FEDER), Agencia Estatal de Investigación (AEI) and MINECO (SAF2014-61644-EXP), (MAT2013-40852-R), (MAT2013-46649-C4-4-P), (MAT2015-71070-REDC), (MAT2016-79866-R), (MAT2016-75586-C4-4-P), FUNCOAT (CSD2008-00023), and by the Junta de Andalucía (projects P12-FQM-2265 and P10-FQM-6900).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical pressure-chemical knowledge: Squeezing bonds and lone pairs within the valence shell electron pair repulsion model

  • Baonza, Valentín G.
  • Lobato, A.
  • Osman, H.H.
  • Salvadó, M.A.
  • Taravillo, Mercedes
  • Recio, J.M.
The valence shell electron pair repulsion (VSEPR) model is a demanding testbed for modern chemical bonding formalisms. The challenge consists in providing reliable quantum mechanical interpretations of how chemical concepts such as bonds, lone pairs, electronegativity, or hypervalence influence (or modulate) molecular geometries. Several schemes have been developed thus far to visualize and characterize these effects; however, to the best of our knowledge, no scheme has yet incorporated the analysis of the premises derived from the ligand close-packing (LCP) extension of the VSEPR model. Within the LCP framework, the activity of the lone pairs of the central atom and ligand-ligand repulsions constitute the two key features necessary to explain certain controversial molecular geometries that do not conform to the VSEPR rules. Considering the dynamical picture obtained when electron local forces at different nuclear configurations are evaluated from first-principles calculations, we investigate the chemical pressure distributions in a variety of molecular systems, namely, electron-deficient molecules (BeH, BH, BF), several AX series (A: N, P, As; X: H, F, Cl), SO, ethylene, SF, ClF, XeF, and nonequilibrium configurations of water and ammonia. Our chemical pressure maps clearly reveal space regions that are totally consistent with the molecular and electronic geometries predicted by VSEPR and provide a quantitative correlation between the lone pair activity of the central atom and electronegativity of ligands, which are in agreement with the LCP model. Moreover, the analysis of the kinetic and potential energy contributions to the chemical pressure allows us to provide simple explanations on the connection between ligand electronegativity and electrophilic/nucleophilic character of the molecules, with interesting implications in their potential reactivity. NH, NF, SO, BF, and the inversion barrier of AX molecules are selected to illustrate our findings., This work was supported by MICINN and MINECO through the following projects: CTQ2015-67755-C2-R and MAT2015-71070- REDC. Funding was also provided by the Grant UCM-GR17- 910481 from the Universidad Complutense de Madrid. FICYTPrincipado de Asturias (Project FC-GRUPIN-IDI/2018/000177) is gratefully acknowledged. A. Lobato acknowledges financial support from FPU grant no. FPU13/05731. Finally, we would like to thank J. Andres for engaging discussions regarding the applications of the CP formalism to the VSEPR theory.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-induced modification of sodium caseinate techno-functional properties

  • Costo, Rocío
  • Sanz Martínez, Pedro Dimas
  • Guignon, Bérengère
Sodium caseinate (NaCas) is a quite common ingredient for the manufacture of food products because of its multiple techno-functional properties. These properties might be enhanced or impaired by high-pressure treatment, which could be employed both, as a preservation treatment or for transformation purposes. To check whether pressure could be able to produce changes in the techno-functional properties of NaCas, aqueous solutions of NaCas at mass fractions of 0.026, and 0.052 were prepared and treated under pressures of 200 or 600 MPa during 15 min at 15, 30, or 60°C. Changes in turbidity, viscosity, foaming, gel-forming, and emulsifying properties of the NaCas solutions before and after pressure–temperature treatments were measured. Turbidity analyses showed that casein aggregates were significantly modified after pressure treatments at 30°C and 60°C. Several techno-functional properties of NaCas dispersions were concomitantly affected. This study suggests that some properties as viscosity, foamability, or water holding capacity are affected by high-pressure treatments but as these changes are below 20%, NaCas should be considered as a pressure-proof additive., This work has been supported by the “Plan Nacional de I+D+i” through the projects CTQ2015-67755-C2-1-R (MINECO/FEDER) and MAT2015-71070-REDC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The self-absorption phenomenon in quantitative Raman spectroscopy and how to correct its effects

  • Uriarte, L. M.
  • Jiménez Bonales, Laura
  • Dubessy, J.
  • Lobato, A.
  • Baonza, Valentín G.
  • Caceres, M.
When the wavelength of the Raman scattered light coincides with the absorption spectrum of the sample, a phenomenon known as Raman self-absorption occurs. If the absorption wavelength range matches completely with the Raman wavenumber range for a given excitation line (high absorption), this process causes spectra with poor signal-to-noise-ratio, making the acquisition nearly impossible. When the absorption of the sample and the Raman scattered are partially coincident (low absorption), smaller modifications in the band-profile of the Raman spectrum are expected difficult to be detected. If a different excitation wavelength is available in order to avoid or minimize this phenomenon, a correction method is customary. The correction methods developed so far in quantitative analysis are still very complex and require the knowledge of several sampling parameters. In this work, we present a very simple but reliable method based on the Beer-Lambert law to correct low self-absorption effects. This method uses simple concepts, a straightforward methodology and the concentration of the Raman active component in the liquid matrix is the only parameter required to perform the correction. This method may be extremely useful in different fields in which Raman spectroscopy is used to obtain molecular and structural information from a band profile analysis. As an example, the method is applied here to successfully correct the Raman spectra of different CuSO4 aqueous solutions excited at 532 nm., This work was supported by the following projects: CTQ2015-67755-C2-1-R (MICINN) and MALTA-Consolider Team grant MAT2015-71070-REDC (MINECO). A. Lobato acknowledge financial support from FPU grant no. FPU13/05731., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Infrared spectroscopic study of the formation of fossil resin analogs with temperature using trans-communic acid as precursor

  • Rodríguez Montoro, Óscar
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Taravillo Corralo, Mercedes
For million years resin exudates have undergone chemical alterations by heat, pressure, radiation, water, oxygen, microorganisms, and have suffered processes of sedimentation and diagenesis. These agents have affected the organic functional groups present in the terpenes of the resins, giving rise to what we nowadays know as fossil resins. In this work, we try to get further insight in the chemical formation of fossil resins. As the simulation of the natural process is quite complex, we have focused on the temperature induced reactivity of the trans-communic acid, the main component of the Class I resins. Using this terpene derivate as a very basic model of a resin exudate, we have monitored their thermal changes by infrared spectroscopy, Differential Scanning Calorimetry and Thermogravimetric Analysis within the range of 25 to 340 °C. The temperature-induced transformation, both in presence and absence of inert atmosphere, is discussed on the basis of the reactivity of the conjugated double-bond, the exocyclic bond and the carboxylic acid group present in the trans-communic acid. The results obtained in these series of experiments agree with the maturation scheme accepted in the literature for natural resins, i.e. an initial cross-linked polymerization and a subsequent maturation reaction. From combined DSC/TGA and infrared spectroscopy results, we conclude that chemical changes produced in the trans-communic acid in the range 130–175 °C may mimic the initial polymerization-like process in the natural resins, whereas those produced between 180 and 340 °C seem to correspond to the maturation pathways described in the literature for fossil resins Class Ib. Spectral assignment of the most relevant infrared-active modes of the trans-communic acid at 25 °C is also provided with the aid of Density Functional Theory calculations.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Superparamagnetic Behavior at Room Temperature through Crystal Chemistry Modification and Particle Assembly Formation: Zinc and Nickel Ferrite Systems

  • Blanco-Gutierrez, Veronica
  • Andrada-Chacon, Adrian
  • Sánchez Benítez, Francisco Javier
  • Urones-Garrote, Esteban
  • Sáez Puche, Regino
  • Torralvo Fernández, María Josefa
Zinc and nickel ferrites were prepared through a solvothermal method with different microstructures: as assemblies of particles and not forming assemblies. By means of Raman spectroscopy, the cation distribution in the spinel structure has been evaluated for all the samples to understand the magnetic behavior characterization. The influence of the assembly microstructure type into the superparamagnetic behavior has been fully studied, and it seems to drastically increase the magnetic response of the samples through a mechanism of favored dipolar interactions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Anharmonicity effects in the frictionlike mode of graphite

  • Menéndez, Cesar
  • Lobato Fernández, Álvaro
  • Abbasi-Pérez, David
  • Fernández-Núñez, José
  • Recio, Jose Manuel
  • García Baonza, Valentín
Graphite is a prototypical solid lubricant demanding a thorough understanding of its low-friction behavior. The 𝐸2⁢𝑔(1) Raman active vibrational mode of graphite is associated with the rigid-layer relative movement of its graphene sheets. Thus, this mode can provide a good means of exploring the low resistance of graphene layers to slip with respect to each other. To take advantage of this fact, the anharmonicity of the 𝐸2⁢𝑔(1) mode has to be carefully characterized and evaluated since the atomic arrangement of carbon atoms in the ambient condition ABA stacking of graphite evidences potential asymmetry. The calculated one-dimensional energetic profile of the 𝐸2⁢𝑔(1) mode reveals this local anisotropy around the energy minima and can be microscopically interpreted in terms of electron density interactions. Morse-type potentials accurately fit the energetic profiles at different interlayer separations, and provide simple analytical expressions for evaluating harmonic and anharmonic contributions to the Γ-point 𝐸2⁢𝑔(1) frequency 𝜔𝐸2⁢𝑔⁡(1) under a perturbative algebraic treatment. We quantify how the anharmonic contribution increases with the available energy (𝐸) at zero pressure, and how this contribution decreases as hydrostatic pressure (𝑝) or uniaxial stress is applied for a given available energy. The calculated 𝜔𝐸2⁢𝑔⁡(1)−𝑝 and 𝜔𝐸2⁢𝑔⁡(1)−𝐸 trends indicate an increasing (decreasing) of frictional forces in graphite with pressure (temperature). Our conclusions are supported by the good agreement of the calculated frequencies with existing Raman experiments under hydrostatic pressure conditions.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Temperature effects on the friction-like mode of graphite

  • Menéndez, Cesar
  • Lobato Fernández, Álvaro
  • García Baonza, Valentín
  • Recio, José Manuel
Since the anharmonicity of the vibrational mode related to the relative rigid motion of graphene layers plays a decisive role in the friction behavior of graphite, a quantitative account of the temperature dependence of the frequency of this E2G(1) mode is worth to be investigated. Starting with the solution of the Morse quantum-mechanical oscillator, a relationship between the populated averaged vibrational quantum number and temperature is proposed. This expression is applied to our previous computed Morse fittings describing the anharmonic potential of this mode (Menéndez et al. in Phys Rev B 93:144112-1–144112-9, 2016) with the aim at providing the available vibrational energy at different pressures and temperatures. We show that the average vibrational quantum number decreases under pressure but the available vibrational energy is almost independent on pressure at a given temperature. As a result, the calculated temperature coefficient shows that inter-layer friction in graphite lowers as temperature increases with a similar trend regardless the pressure applied.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-pressure/high-temperature phase diagram of zinc

  • Errandonea, Daniel|||0000-0003-0189-4221
  • Macleod, S. G.
  • Ruiz-Fuertes, J.
  • Burakovsky, L.
  • McMahon, M. I.
  • Wilson, C. W.
  • Ibañez-Insa, Jordi|||0000-0002-8909-6541
  • Daisenberger, D.
  • Popescu, Catalin|||0000-0001-6613-4739
The phase diagram of zinc (Zn) has been explored up to 140 GPa and 6000 K, by combining optical observations, x-ray diffraction, and ab initio calculations. In the pressure range covered by this study, Zn is found to retain a hexagonal close-packed (hcp) crystal symmetry up to the melting temperature. The known decrease of the axial ratio (c/a) of the hcp phase of Zn under compression is observed in x-ray diffraction experiments from 300 K up to the melting temperature. The pressure at which c/a reaches (≈10 GPa) is slightly affected by temperature. When this axial ratio is reached, we observed that single crystals of Zn, formed at high temperature, break into multiple poly-crystals. In addition, a noticeable change in the pressure dependence of c/a takes place at the same pressure. Both phenomena could be caused by an isomorphic second-order phase transition induced by pressure in Zn. The reported melt curve extends previous results from 24 to 135 GPa. The pressure dependence obtained for the melting temperature is accurately described up to 135 GPa by using a Simon-Glatzel equation: where P is the pressure in GPa. The determined melt curve agrees with previous low-pressure studies and with shock-wave experiments, with a melting temperature of 5060(30) K at 135 GPa. Finally, a thermal equation of state is reported, which at room-temperature agrees with the literature.