Pasar al contenido principal

MECANOQUIMICA EN CONDICIONES DE PRESION CONTROLADA: NUEVOS CONCEPTOS Y APLICACIONES EN QUIMICA

PGC2018-094814-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

High pressure exploration in the Li–Ln–V–O system

  • Zadoya, A. I
  • Arévalo López, Á. M.
  • Sánchez Benítez, Francisco Javier
  • Huvé, .M.
  • Blach, J.-F
  • Merkel, S.
  • Hilairet, N.
  • Chantel, J.
  • Colmont, M.
Using in situ high pressure Raman spectroscopy, two structural changes were observed in a sample of the composition LiLa5O5(VO4)(2). Taking this into account and by combining different conditions, three new compounds were further obtained from high pressure-high temperature synthesis. Their crystal structure description was done using the antiphase approach, which implies the presence of oxygen-centered [OLn(4)] building units, where Ln is La for (1) beta-LiLa5O5(VO4)(2) and (2) beta-LiLa2O2(VO4) or Nd for (3) LiNd5O5(VO4)(2) compounds. (1) crystallizes in the triclinic space group P (1) over bar with unit cell parameters of a = 5.8167(15) angstrom, b = 12.2954(28) angstrom, c = 18.7221(69) angstrom, alpha = 102.03(2)degrees, beta = 98.76(2)degrees, and gamma = 103.54(2)degrees; a 3D structure was deduced from the ambient pressure polymorph. (2) also crystallizes in P (1) over bar with a = 5.8144(7) angstrom, b = 5.8167(7) angstrom, c = 8.5272(1) angstrom, alpha = 98.184(7)degrees, beta = 100.662(7)degrees and gamma = 92.579(7)degrees. It shows a 2D structure with [La2O2](2+) layers surrounded by [LiO4] and [VO4) tetrahedra sharing corners and edges. (3) exhibits a 3D architecture isotypic with AP-LiLa5O5(VO4)(2). The crucial role of high pressure in such types of synthesis and materials is also discussed.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Compressing the channels in the crystal structure of copper squarate metal-organic framework

  • Colmenero Ruiz, Francisco
  • Lobato Fernández, Álvaro
  • Timón, Vicente
The crystal structure of a copper squarate metal-organic framework is fully determined using first principles methods based in density functional theory. The compressibility of this material is studied by optimizing the structure under different isotropic pressures and uniaxial stresses directed along the direction of minimum compressibility, [1 0 0]. Under isotropic compression, channels become wider along [1 0 0], leading to negative linear compressibility, NLC. Under compression along [1 0 0], the unit-cell volume increases leading to negative volumetric compressibility.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Pressure-Induced Reversible Framework Rearrangement and Increased Polarization in the Polar [NH₄[Cd(HCOO)₃] Hybrid Perovskite

  • Bermúdez-García, Juan Manuel
  • García-Fernández, Alberto
  • Andrada-Chacón, A.
  • Sánchez-Benítez, Javier
  • Ren, Wei
  • Hu, Shunbo
  • Gu, Teng
  • Xiang, Hongjun
  • Biczysko, Malgorzata
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Stroppa, Alessandro
  • Señarís-Rodríguez, M. A.
This is an accepted version of the published document. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/C9QI00749K., Electronic supplementary information (ESI) available: Detail of PXRD patterns and Le Bail refinement of [NH4][Cd(HCOO)3] upon compression at room temperature. Diagram showing the main changes on the crystal structure caused by applied external pressure. See DOI: 10.1039/c9qi00749k, [Abstract] In this work, we study the structural changes of the polar [NH₄[Cd(HCOO)₃] hybrid perovskite under external hydrostatic pressure. We report a reversible framework rearrangement as a function of pressure characterized by: (i) a gradual modification of one formate ligand, which changes its coordination mode from a bridging syn–anti mode at atmospheric pressure (LP-phase) to a chelating-anti mode at high-pressure (HP-phase) and (ii) a change in the coordination of the Cd²⁺ cations from six-coordinated (LP-phase) to hepta-coordinated (HP-phase). Very interestingly, this unprecedented framework arrangement displays a large electrical polarization. For instance, the polarization value observed at p = 17.7 GPa is about four times the polarization at atmospheric pressure. Therefore, we report that the external pressure induces a novel framework rearrangement in the polar [NH₄[Cd(HCOO)₃] hybrid perovskite with enhanced electrical polarization. This structure–property relationship offers new insights for designing novel ferroelectric materials based on pressure-responsive hybrid perovskite materials., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the projects [CSD2007-00045, CTQ2015-67755-C2-1-R and MAT2017-86453-R], Ministerio de Ciencia, Innovación y Universidades (MICINN) and EU-FEDER under the project PGC2018-094814-B-C21 and Xunta de Galicia under the project ED431C2018/39. They also thank the MALTA Consortium for making their facilities available, and acknowledge B. Winkler and L. Bayarjargal of the Institute for Geoscience, University of Frankfurt am Main, Germany, for the experimental Raman spectra. J. M. B.-G. acknowledges Xunta de Galicia for a Postdoctoral Fellowship, Xunta de Galicia; ED431C2018/39
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compressing the Channels in the Crystal Structure of Copper Squarate Metal-Organic Framework

  • Colmenero, Francisco
  • Lobato, A.
  • Timón, Vicente
11 pags., 8 figs., 1 tab., The crystal structure of a copper squarate metal-organic framework is fully determined using first principles methods based in density functional theory. The compressibility of this material is studied by optimizing the structure under different isotropic pressures and uniaxial stresses directed along the direction of minimum compressibility, [1 0 0]. Under isotropic compression, channels become wider along [1 0 0], leading to negative linear compressibility, NLC. Under compression along [1 0 0], the unit-cell volume increases leading to negative volumetric compressibility., This work was financially supported by the Ministerio de Ciencia e Innovación (project PGC2018-094814-B-C21). V.T. was supported by the Ministry of Science, Innovation and Universities within the Project FIS2016-77726-C3-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZIF-75 under Pressure: Negative Linear Compressibility and Pressure-Induced Instability

  • Colmenero, Francisco
  • Timón, Vicente
14 pags., 6 figs., 1 tab. -- This article belongs to the Special Issue Synthesis and Applications of Metal-Organic Frameworks (MOFs), Featured Application: The zeolitic imidazolate framework ZIF-75 exhibits the negative linear compressibility effect under small applied pressures with multiple potential applications. The behavior of the crystal structure of the zeolitic imidazolate framework ZIF-75 under pressure was studied by means of periodic density functional theory methods. Experimentally, it was shown that this material is tetragonal, space group (Formula presented.) at room temperature. However, according to the calculations, at zero temperature this material is monoclinic, space group (Formula presented.). Irrespective of the symmetry of the material, the results show that ZIF-75 exhibits a negative linear compressibility effect and is unstable under relatively small applied pressures of the order of 0.1 GPa., The Ministry of Science, Innovation and Universities financially supported the present work through the projects PGC2018-094814-B-C21 (FC) and FIS2016-77726-C3-1-P (VT).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and Electronic Effect Driven Distortions in Visible Light Absorbing Polar Materials ATa2V2O11(A = Sr, Pb)

  • Babaryk, Artem A.
  • Odynets, Ievgen V.
  • Lobato, Álvaro
  • Adawy, Alaa
  • Recio, J. Manuel
  • García-Granda, Santiago
Complex vanadates of tantalum(V), such as ATa2V2O11 (A = Sr, Pb), are rare and underrated materials, which have potential application domains that could be substantially expanded, mitigating the existing controversy on their atomic and electronic organization. Herein, we present a thorough structural examination combining synchrotron powder X-ray diffraction-aided distortion mode analysis with computational methods to study hettotypes of SrTa2V2O11 (STVO) and PbTa2V2O11 (PTVO). Being distinct from the perovskite family due to the presence of [VO4] groups, both compounds are polar dielectric materials with certain similarities to SBT and PBT Aurivillius phases. Applying the model of anions of metallic matrices to the analysis of electron localization functions calculated on top of as-established equilibrium structures helps retrace the effects in the Sr and Pb surroundings on the respective crystal packings of STVO and PTVO., Use of the Advanced Photon Source at Argonne National Laboratory was supported by the U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. This research was supported by Spanish MCIU and MINECO through the following projects: PGC2018-094814-B-C2, MCI-21- PID2020-113558RB-C41, and RED2018-102612-T, and Principado de Asturias FICYT Agency (Spain) and EU-FEDER through projects FC-GRUPIN-IDI/2018/000170, FC-GRUPIN-IDI/2018/000177, SV-PA-21-AYUD/2021/51036, and SV-PA-21-AYUD/2021/50997. The authors thank the Institute for Scientific and Technological Resources and the MALTA-Consolider supercomputing center at the University of Oviedo for the technical support and primarily data acquisition
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical Characterization of Anhydrous Microporous Aluminophosphate Materials: Tridimensional Incompressibility, Ductility, Isotropy and Negative Linear Compressibility

  • Colmenero, Francisco
  • Lobato, A.
  • Timón, Vicente
43 pags., 18 figs., 6 tabs., Here, a detailed mechanical characterization of five important anhydrous microporous aluminophosphate materials (VPI-5, ALPO-8, ALPO-5, ALPO-18, and ALPO-31) is performed using first principles methods based on periodic density functional theory. These materials are characterized by the presence of large empty structural channels expanding along several different crystallographic directions. The elasticity tensors, mechanical properties, and compressibility functions of these materials are determined and analyzed. All of these materials have a common elastic behavior and share many mechanical properties. They are largely incompressible at zero pressure, the compressibilities along the three crystallographic directions being frequently smaller than 5 (Formula presented.). Notably, the compressibilities of ALPO-5 and ALPO-31 along the three principal directions are smaller than this threshold. Likewise, the compressibilities of ALPO-18 along two directions are smaller than 5 (Formula presented.). All of the considered materials are shear resistant and ductile due to the large bulk to shear moduli ratio. Furthermore, all of these materials have very small mechanical anisotropies. ALPO-18 exhibits the negative linear compressibility (NLC) phenomenon for external pressures in the range P = 1.21 to P = 2.70 GPa. The minimum value of the compressibility along the [1 0 0] direction, (Formula presented.) 30.9 (Formula presented.), is encountered for P = 2.04 GPa. The NLC effect in this material can be rationalized using the empty channel structural mechanism. The effect of water molecule adsorption in the channels of ALPO-18 is assessed by studying the hydrated ALPO-18 material (ALPO-18W). ALPO-18W is much more compressible and less ductile than ALPO-18 and does not present NLC effects. Finally, the effect of aging and pressure polymorphism in the mechanical properties of VPI-5 and ALPO-5 is studied. As hydration, aging leads to significant variations in the elastic properties of VPI-5 and increases substantially its compressibility. For ALPO-5, pressure polymorphism has a small impact in its elasticity at zero pressure but a large influence at high pressure., This work was financially supported by the Ministry of Science, Innovation and Universities (project PGC2018-094814-B-C21). One of the authors (VT) was supported by the Ministry of Science, Innovation and Universities within the Project FIS2016-77726-C3-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highs and Lows of Bond Lengths: Is There Any Limit?

  • Alvaro Lobato
  • Miguel A. Salvadó
  • José Manuel Recio
  • Mercedes Taravillo
  • Valentin Garcia Baonza
Two distinct points on the potential energy curve (PEC) of a pairwise interaction, the zero-energy crossing point and the point where the stretching force constant vanishes, allow us to anticipate the range of possible distances between two atoms in diatomic, molecular moieties and crystalline systems. We show that these bond-stability boundaries are unambiguously defined and correlate with topological descriptors of electron-density-based scalar fields, and can be calculated using generic PECs. Chemical databases and quantum-mechanical calculations are used to analyze a full set of diatomic bonds of atoms from the s-p main block. Emphasis is placed on the effect of substituents in C−C covalent bonds, concluding that distances shorter than 1.14 Å or longer than 2.0 Å are unlikely to be achieved, in agreement with ultra-high-pressure data and transition-state distances, respectively. Presumed exceptions are used to place our model in the correct framework and to formulate a conjecture for chained interactions, which offers an explanation for the multimodal histogram of O−H distances reported for hundreds of chemical systems., This work was supported by the Spanish National Research Agency (AEI) through projects PGC2018-094814-B-C21, PGC2018-094814-B-C22 and RED2018-102612-T, and Principado de Asturias FICYT under Project No. FC-GRUPIN-IDI/2018/000177. We acknowledge Prof. Ángel Martín-Pendás for fruitful discussions, Dr. David Abbasi (Silico Studio) for designing the TOC Figure and Billy Shears for inspiration. We also thank the anonymous referees for pointing out working examples and suggestions for improving the content and broadening the scope of our study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge analysis in (RE)CrO<inf>4</inf> scheelites by combined Raman spectroscopy and computer simulations

  • Baonza, Valentín G.
  • Lobato, Álvaro
  • Recio, J. Manuel
  • Taravillo, Mercedes
The quest for structure-property relationships in scheelite-type (RE)CrO4 compounds (where RE is a rare earth element) is a difficult task due to the number of exceptions found in RE empirical trends and the uncommon Cr(V) oxidation state. In this work, we experimentally and computationally analyse how the stretching vibrational frequencies ν1(Ag) and ν3(Eg) associated with the [CrO4] tetrahedral units evolve in the (RE)CrO4 crystal family (RE ​= ​Nd, Gd, Dy, Ho, and Lu). Since previously reported Cr–O distances and volume changes along with the RE series are not sufficiently accurate to explain the monotonic decrease observed for the ν1(Ag) and ν3(Eg) frequencies, a deeper analysis was performed involving the well-known fact that the bond strength (force constant) decreases as the interatomic distance increases. Our results demonstrates that structural and spectroscopic parameters can be reconciled with classical solid state chemistry ideas when charge effects are considered. This analysis provides a new method for predicting chromium oxidation states from Raman spectroscopy that can be generalised to the study of other crystal families., This work was supported by the Spanish National Research Agency (AEI) through projects PGC2018-094814-B-C21, PGC2018-094814-B-C22 and RED2018-102612-T. We also thank Professor Regino Sáez Puche for providing us with the samples studied in this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highs and Lows of Bond Lengths: Is There Any Limit?

  • Lobato, Alvaro
  • Salvadó, Miguel A
  • Recio, J Manuel
  • Taravillo, Mercedes
  • Baonza, Valentín G.
Two distinct points on the potential energy curve (PEC) of a pairwise interaction, the zero-energy crossing point and the point where the stretching force constant vanishes, allow us to anticipate the range of possible distances between two atoms in diatomic, molecular moieties and crystalline systems. We show that these bond-stability boundaries are unambiguously defined and correlate with topological descriptors of electron-density-based scalar fields, and can be calculated using generic PECs. Chemical databases and quantum-mechanical calculations are used to analyze a full set of diatomic bonds of atoms from the s-p main block. Emphasis is placed on the effect of substituents in C-C covalent bonds, concluding that distances shorter than 1.14 Å or longer than 2.0 Å are unlikely to be achieved, in agreement with ultra-high-pressure data and transition-state distances, respectively. Presumed exceptions are used to place our model in the correct framework and to formulate a conjecture for chained interactions, which offers an explanation for the multimodal histogram of O-H distances reported for hundreds of chemical systems., This work was supported by the Spanish National Research Agency (AEI) through projects PGC2018-094814-B-C21, PGC2018-094814-B-C22 and RED2018-102612-T, and Principado de Asturias FICYT under Project No. FC-GRUPINIDI/2018/000177. We acknowledge Prof. _ngel Mart&nPend#s for fruitful discussions, Dr. David Abbasi (Silico Studio) for designing the TOC Figure and Billy Shears for inspiration. We also thank the anonymous referees for pointing out working examples and suggestions for improving the content and broadening the scope of our study, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LZS-1, Lanzarote (Canary Island, Spain) lunar (Apollo 14) basaltic soil simulant

  • Alberquilla, Fernando
  • Martínez-Frías, Jesús
  • Lunar, Rosario
  • Baonza, Valentín G.
The search for Terrestrial Analogues is essential for the development of future permanent or semi-permanent lunar bases. Terrestrial Analogues are zones where it is possible to probe not only scientific instruments, but also other astronaut capabilities in an environment that is similar to the geological context, geomorphology, mineralogy, geochemistry, etc. that we can find on Mars, the Moon and even asteroids. This work has focused on a multi-analytical characterization of Peñas de Tao geosite basalts in Lanzarote (Canary Islands, Spain). This characterization starts from a field campaign in which 3000 g of basalt rocks were selected. Subsequently, they were analysed by different techniques to determine their composition at a mineralogical and geochemical level, and the results were compared with data from other lunar simulants and from the Apollo 14 mission. After that, a set of petrophysical tests was carried out in order to determine its physical properties and evaluate its capacity as an analogous material for use in situ as a resource for further geological and astrobiological (future lunar habitability) essays., Thanks to the Institute of Geosciences and especially to the petrophysics laboratory. A special thanks to the research support centre (CAI) of the Faculty of Geological Sciences at Complutense University of Madrid and to the National Centre for Electron Microscopy. Thanks to the Research project: PGC2018-094814-B-C21 (MCI-AEI/FEDER, EU). Mechanochemistry under controlled pressure conditions: new concepts and applications in Chemistry for its support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

U(VI) speciation studies by Raman spectroscopy technique in the production of nuclear fuel

  • Jiménez Bonales, Laura
  • Rodríguez-Villagra, Nieves
  • Sánchez-García, Iván
  • Montoro, Oscar R.
One key intermediate solid product in the industrial production of the UO2 for fabrication of common nuclear fuel is the ammonium diuranate or ADU. Its composition and morphology are crucial for industrial operations since this determines the quality of UO2 powder. In this work we demonstrate that Raman spectroscopy technique is a power tool to characterize the precipitation of ADU and to monitor the precipitation reaction progress, being able to follow the U(VI) speciation and to correlate these results with the features of the obtained solid. Thereby, here we propose the use of the Raman spectroscopy technique in the production of nuclear fuel in order to monitor the speciation of U(VI) during the ADU precipitation with dual-purpose; in one hand, to improve the safety in the fuel management and on the other hand, for the quality control for the manufacturing industry in nuclear power., This work was supported by the Spanish State Research Agency (AEI) project MDM-2017-0737 Unidad de Excelencia "María de Maeztu"- Centro de Astrobiología (INTA-CSIC) and PGC2018-094814-B-C21 (Ministerio de Ciencia e Innovación). The authors also want to thank to Luis Gutiérrez and Sofía Durán for their help in the samples analysis by XRD and ICP-MS., With funding from the Spanish government through the ‘María de Maeztu Unit of Excelence’ accreditation (MDM-2017-0737)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Pressure-Driven Metallization in Hafnium Diselenide

  • Andrada Chacón, Adrián
  • Morales García, Ángel
  • Salvadó, Miguel A.
  • Pertierra, Pilar
  • Franco, Ruth
  • Garbarino, Gastón
  • Taravillo, Mercedes
  • Barreda Argüeso, José A.
  • González, Jesús
  • García Baonza, Valentín
  • Recio, J. Manuel
  • Sánchez Benítez, Francisco Javier
The quest for new transition metal dichalcogenides (TMDs) with outstanding electronic properties operating under ambient conditions draws us to investigate the 1T-HfSe2 polytype under hydrostatic pressure. Diamond anvil cell (DAC) devices coupled to in situ synchrotron X-ray, Raman, and optical (VIS–NIR) absorption experiments along with density functional theory (DFT)-based calculations prove that (i) bulk 1T-HfSe2 exhibits strong structural and vibrational anisotropies, being the interlayer direction especially sensitive to pressure changes, (ii) the indirect gap of 1T-HfSe2 tends to vanish by a −0.1 eV/GPa pressure rate, slightly faster than MoS2 or WS2, (iii) the onset of the metallic behavior appears at Pmet ∼10 GPa, which is to date the lowest pressure among common TMDs, and finally, (iv) the electronic transition is explained by the bulk modulus B0-Pmet correlation, along with the pressure coefficient of the band gap, in terms of the electronic overlap between chalcogenide p-type and metal d-type orbitals. Overall, our findings identify 1T-HfSe2 as a new efficient TMD material with potential multipurpose technological applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Mechanical characterization of anhydrous microporous aluminophosphate materials: tridimensional incompressibility, ductility, isotropy and negative linear compressibility

  • Colmenero Ruiz, Francisco
  • Lobato Fernández, Álvaro
  • Timón, Vicente
Here, a detailed mechanical characterization of five important anhydrous microporous aluminophosphate materials (VPI-5, ALPO-8, ALPO-5, ALPO-18, and ALPO-31) is performed using first principles methods based on periodic density functional theory. These materials are characterized by the presence of large empty structural channels expanding along several different crystallographic directions. The elasticity tensors, mechanical properties, and compressibility functions of these materials are determined and analyzed. All of these materials have a common elastic behavior and share many mechanical properties. They are largely incompressible at zero pressure, the compressibilities along the three crystallographic directions being frequently smaller than 5 TPa−1. Notably, the compressibilities of ALPO-5 and ALPO-31 along the three principal directions are smaller than this threshold. Likewise, the compressibilities of ALPO-18 along two directions are smaller than 5 TPa−1. All of the considered materials are shear resistant and ductile due to the large bulk to shear moduli ratio. Furthermore, all of these materials have very small mechanical anisotropies. ALPO-18 exhibits the negative linear compressibility (NLC) phenomenon for external pressures in the range P = 1.21 to P = 2.70 GPa. The minimum value of the compressibility along the [1 0 0] direction, ka=−30.9 TPa−1, is encountered for P = 2.04 GPa. The NLC effect in this material can be rationalized using the empty channel structural mechanism. The effect of water molecule adsorption in the channels of ALPO-18 is assessed by studying the hydrated ALPO-18 material (ALPO-18W). ALPO-18W is much more compressible and less ductile than ALPO-18 and does not present NLC effects. Finally, the effect of aging and pressure polymorphism in the mechanical properties of VPI-5 and ALPO-5 is studied. As hydration, aging leads to significant variations in the elastic properties of VPI-5 and increases substantially its compressibility. For ALPO-5, pressure polymorphism has a small impact in its elasticity at zero pressure but a large influence at high pressure.