Pasar al contenido principal

MATERIALES HIBRIDOS ORGANICO-INORGANICOS PARA APLICACIONES DE REFRIGERACION ECOLOGICAS

MAT2017-86453-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uso de la correlación estadística para la gestión energética en locales de oficina empleando técnicas de la industria 4.0, Use of statistical correlation for energy management in office premises adopting techniques of the Industry 4.0

  • Hernandez-Luna, Monica
  • Robledo-Fava, Roberto
  • Paredes, Angel
  • Michinel Álvarez, HJ
  • Zaragoza Fernández, S
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[ES] Presentamos un análisis estadístico de las correlaciones entre la concentración de dióxido de carbono y el consumo de energía en lugares de trabajo, con el objetivo de poder ser programadas en plataformas energéticas In cloud, para la mejora de la gestión y el aumento el grado de automatización y control en la industria del sector servicios. Se usa un sistema de bajo coste para medir y transmitir los datos de los edificios y la información puede ser análizada desde cualquier dispositivo remoto. El estudio incluye datos medidos durante un año en dos oficinas situadas en Sada (A Coruña, España) y Clayton (Panamá). Presentamos curvas de regresión lineal y no lineal, mostramos que hay correlaciones positivas significativas y discutimos aspectos estacionales y relacionados con el clima. Argumentamos que este tipo de análisis puede generar información útil para el diseño y operación en la industria de servicios, a través de plataformas energéticas de control y automatización en web., [EN] We present a statistical analysis of correlations between carbon dioxide concentration and energy consumption in workplaces, with the goal of enabling its eventual programming in energy platforms In Cloud for improving management and enhancing automation and control in the service sector industry. A low-cost system is used to measure and transmit the data of buildings and the information can be analyzed by any remote device. The study includes data measured during one year in two offices located at Sada (A Coruna, Spain) and Clayton (Panama). We present linear and nonlinear regression curves, show that there are significant positive correlations and discuss seasonal and climate-related aspects. We argue that this kind of analysis can provide useful information for the design and operation in the service industry, through web-based energy platforms for control and automation., The authors acknowledge Fridama Instalaciones, S.L. for granting access to data for the present study and the EQUS energy platform for the data management software. This work was partially supported by grants FIS2014-58117-P, ENE2015-71333-R, MAT2017-86453-R and FIS2017-83762-P from Ministerio de Economia y Competitividad (Spain) and grant GPC2015/019 from Conselleria de Cultura, Educacion e Ordenacion Universitaria (Xunta de Galicia, Spain). R. Robledo Fava and M.C. Hernandez Luna were supported by CONACYT grants no. 298503 and 296471, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Influence Subjective Human Parameters in the Calculation of Thermal Comfort and Energy Consumption of Buildings

  • Robledo-Fava, Roberto
  • Hernández-Luna, Monica C.
  • Michinel, Humberto
  • Zaragoza, Sonia
  • Castillo-Guzman, A.
  • Selvas-Aguilar, Romeo
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
[EN] In the present work, we analyze the influence of the designer's choice of values for the human metabolic index (met) and insulation by clothing (clo) that can be selected within the ISO 7730 for the calculation of the energy demand of buildings. To this aim, we first numerically modeled, using TRNSYS, two buildings in different countries and climatologies. Then, we consistently validated our simulations by predicting indoor temperatures and comparing them with measured data. After that, the energy demand of both buildings was obtained. Subsequently, the variability of the set-point temperature concerning the choice of clo and met, within limits prescribed in ISO 7730, was analyzed using a Monte Carlo method. This variability of the interior comfort conditions has been finally used in the numerical model previously validated, to calculate the changes in the energy demand of the two buildings. Therefore, this work demonstrated that the diversity of possibilities offered by ISO 7730 for the choice of clo and met results, depending on the values chosen by the designer, in significant differences in indoor comfort conditions, leading to non-negligible changes in the calculations of energy consumption, especially in the case of big buildings., This work was partially funded by grants OHMERA MAT2017-86453-R, FIS2017-83762-P and ENE2015-71333-R from MINECO (Spain). R. Robledo and M. Hernandez were supported by CONACYT grants 298503 and 296471, respectively. We also thanks to supporting given by the project number INFRA-187906 from the Mexican National Council of Science and Technology-CONACYT.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Atypical Magnetic Behavior in the Incommensurate (CH3NH3)[Ni(HCOO)3] Hybrid Perovskite

  • Pato Doldán, Breogán
  • Cañadillas Delgado, Laura
  • Gómez Aguirre, Lilián Claudia
  • Señarís Rodríguez, María Antonia
  • Sánchez Andújar, Manuel
  • Fabelo, Óscar
  • Mira Pérez, Jorge
A plethora of temperature-induced phase transitions have been observed in (CH3NH3)[M(HCOO)3] compounds, where M is Co(II) or Ni(II). Among them, the nickel compound exhibits a combination of magnetic and nuclear incommensurability below Néel temperature. Despite the fact that the zero-field behavior has been previously addressed, here we study in depth the macroscopic magnetic behavior of this compound to unveil the origin of the atypical magnetic response found in it and in its parent family of formate perovskites. In particular, they show a puzzling magnetization reversal in the curves measured starting from low temperatures, after cooling under zero field. The first atypical phenomenon is the impossibility of reaching zero magnetization, even by nullifying the applied external field and even compensating it for the influence of the Earth’s magnetic field. Relatively large magnetic fields are needed to switch the magnetization from negative to positive values or vice versa, which is compatible with a soft ferromagnetic system. The atypical path found in its first magnetization curve and hysteresis loop at low temperatures is the most noticeable feature. The magnetization curve switches from more than 1200 Oe from the first magnetization loop to the subsequent magnetization loops. A feature that cannot be explained using a model based on unbalanced pair of domains. As a result, we decipher this behavior in light of the incommensurate structure of this material. We propose, in particular, that the applied magnetic field induces a magnetic phase transition from a magnetically incommensurate structure to a magnetically modulated collinear structure
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Near-Room-Temperature Reversible Giant Barocaloric Effects in [(CH₃)₄N]Mn[N₃]₃ Hybrid Perovskite

  • Salgado-Beceiro, Jorge
  • Silva, Ariel Nonato Almeida de Abreu
  • Silva, Rosivaldo Xavier da
  • García-Fernández, Alberto
  • Sánchez-Andújar, Manuel
  • Castro-García, Socorro
  • Stern-Taulats, Enric
  • Señarís-Rodríguez, M. A.
  • Moya, Xavier
  • Bermúdez-García, Juan Manuel
[Abstract] We report giant reversible barocaloric effects in [(CH₃)₄N]Mn[N₃]₃ hybrid organic–inorganic perovskite, near its first-order cubic-monoclinic structural phase transition at 𝑇₀ ∼ 305 K. When driving the transition thermally at atmospheric pressure, the transition displays a large change in entropy of ∼80 J K⁻¹ kg⁻¹ and a small thermal hysteresis of ∼7 K, as well as a large change in volume of ∼1.5%. When driving the transition with pressure near room temperature, the transition displays large changes in entropy of ∼70 J K⁻¹ kg⁻¹, which represent a giant barocaloric response. Hybrid perovskites with similar barocaloric response and lower operating temperatures may find applications in environmentally friendly cooling., The authors are grateful for financial support from Ministerio de Economía y Competitividad MINECO and EU-FEDER (MAT2017-86453-R), Xunta de Galicia (ED431G/09), FAMEPA (COOPI-07771/17), and ERC Starting Grant no. 680032, Xunta de Galicia; ED431G/09
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Narrowing the Tolerance Factor Limits for Hybrid Organic-Inorganic Dicyanamide-Perovskites

  • García Ben, Javier
  • García-Fernández, Alberto
  • Dafonte Rodríguez, Pedro
  • Delgado Ferreiro, Ignacio
  • Cappel, Ute
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
[Abstract] In this work we focus in setting the limits of the tolerance factor and the size of the A-cations that stabilize the perovskite structure in hybrid dicyanamide compounds [A][Mn(dca)3]. For this purpose, we propose an alternative, simple approach to calculate a more realistic effective ionic radius for the large and anisotropic A-cations often present in these type of compounds. We test the proposed procedure by analysing the crystal structures of [A][Mn(dca)3] dicyanamide hybrids reported in the literature and recalculating the tolerance factors of such compounds, as well as by preparing five new [A][Mn(dca)3] members, discussing also the influence of the A-cation shape in the stability limits of the perovskite structure. Interestingly, such methodology is not only useful to develop new compounds of the emerging family of (multi)functional multi(stimuli)-responsive dicyanamide materials but can also be applied to other hybrid organic-inorganic perovskites and related materials., As for financial support, the authors thank Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00), and Xunta de Galicia for the collaboration agreement “Development of research strategic actions Universidade da Coruña I ​+ ​D ​+ ​i 2021–2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool). J.G.-B. and J.M.B.-G. acknowledge Xunta de Galicia for Predoctoral and Postdoctoral Fellowships, respectively. I.D.-F thanks Ministerio de Universidades for a FPU Predoctoral Fellowship. A. G.-F. and U.B.C thank the Carl Tryggers foundation and the Göran Gustafsson foundation for financial support
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Pressure-Induced Reversible Framework Rearrangement and Increased Polarization in the Polar [NH₄[Cd(HCOO)₃] Hybrid Perovskite

  • Bermúdez-García, Juan Manuel
  • García-Fernández, Alberto
  • Andrada-Chacón, A.
  • Sánchez-Benítez, Javier
  • Ren, Wei
  • Hu, Shunbo
  • Gu, Teng
  • Xiang, Hongjun
  • Biczysko, Malgorzata
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Stroppa, Alessandro
  • Señarís-Rodríguez, M. A.
This is an accepted version of the published document. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/C9QI00749K., Electronic supplementary information (ESI) available: Detail of PXRD patterns and Le Bail refinement of [NH4][Cd(HCOO)3] upon compression at room temperature. Diagram showing the main changes on the crystal structure caused by applied external pressure. See DOI: 10.1039/c9qi00749k, [Abstract] In this work, we study the structural changes of the polar [NH₄[Cd(HCOO)₃] hybrid perovskite under external hydrostatic pressure. We report a reversible framework rearrangement as a function of pressure characterized by: (i) a gradual modification of one formate ligand, which changes its coordination mode from a bridging syn–anti mode at atmospheric pressure (LP-phase) to a chelating-anti mode at high-pressure (HP-phase) and (ii) a change in the coordination of the Cd²⁺ cations from six-coordinated (LP-phase) to hepta-coordinated (HP-phase). Very interestingly, this unprecedented framework arrangement displays a large electrical polarization. For instance, the polarization value observed at p = 17.7 GPa is about four times the polarization at atmospheric pressure. Therefore, we report that the external pressure induces a novel framework rearrangement in the polar [NH₄[Cd(HCOO)₃] hybrid perovskite with enhanced electrical polarization. This structure–property relationship offers new insights for designing novel ferroelectric materials based on pressure-responsive hybrid perovskite materials., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the projects [CSD2007-00045, CTQ2015-67755-C2-1-R and MAT2017-86453-R], Ministerio de Ciencia, Innovación y Universidades (MICINN) and EU-FEDER under the project PGC2018-094814-B-C21 and Xunta de Galicia under the project ED431C2018/39. They also thank the MALTA Consortium for making their facilities available, and acknowledge B. Winkler and L. Bayarjargal of the Institute for Geoscience, University of Frankfurt am Main, Germany, for the experimental Raman spectra. J. M. B.-G. acknowledges Xunta de Galicia for a Postdoctoral Fellowship, Xunta de Galicia; ED431C2018/39
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Giant Barocaloric Tunability in [(CH3CH2CH2)4N]Cd[N(CN)2]3 Hybrid Perovskite

  • Bermúdez-García, Juan Manuel
  • Yáñez, Susana
  • García-Fernández, Alberto
  • Sánchez-Andújar, Manuel
  • Castro-García, Socorro
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Dilshad, Melony
  • Moya, Xavier
  • Señarís-Rodríguez, M. A.
This is an accepted version of the following published document: J. M. Bermúdez-García, S. Yáñez-Vilar, A. García-Fernández, M. Sánchez-Andújar, S. Castro-García, J. López-Beceiro, R. Artiaga, M. Dilshad, X. Moya and M. A. Señarís-Rodríguez, Giant barocaloric tunability in [(CH3CH2CH2)4N]Cd[N(CN)2]3 hybrid perovskite, J. Mater. Chem. C, 2018, 6, 9867–9874. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/C7TC03136J., [Abstract] We report the barocaloric performance of cadmium-dicyanamide perovskite [(CH3CH2CH2)4N]Cd[N(CN)2]3 ([TPrA]Cd[dca]3). The introduction of Cd, a large second-row post-transition metal, into this hybrid organic–inorganic perovskite structure leads to three separate thermally driven phase transitions and four polymorphs, which we characterize in full using temperature-dependent X-ray diffraction and temperature-dependent calorimetry. Amongst these transitions, the non-isochoric orthorhombic to tetragonal phase transition at high temperatures, with a large volume change of ∼0.4%, leads to a large reversible pressure-driven isothermal change in entropy of ∼11.5 J K−1 kg−1, and a giant barocaloric tunability of the transition temperature with pressure of ∼38.2 K kbar−1, which are both desirable for future low-pressure barocaloric cooling applications., We thank Dr E. Stern-Taulats, Dr G. Nataf and Mr A. Avramenko for useful discussions about barocalorics. The authors are grateful for financial support from Ministerio de Economía y Competitividad MINECO and EU-FEDER (project MAT2017-86453-R), and ERC Starting Grant no 680032. J. M. B. G. acknowledges Xunta de Galicia for a Postdoctoral Fellowship. X. M. is grateful for support from the Royal Society
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Simple and Low-Cost Footstep Energy-Recover Barocaloric Heating and Cooling Device

  • García Ben, Javier
  • Delgado Ferreiro, Ignacio
  • Salgado-Beceiro, Jorge
  • Bermúdez-García, Juan Manuel
[Abstract] In this work, we design, build, and test one of the very first barocaloric devices. The here presented device can recover the energy generated by an individual’s footstep and transform it into barocaloric heating and/or cooling. Accordingly, we present an innovative device that can provide eco-friendly and gas-free heating/cooling. Moreover, we test the device by measuring a new barocaloric organic polymer that exhibits a large adiabatic temperature change of ~2.9 K under the application of 380 bar. These results pave the way towards novel and more advanced barocaloric technologies and provide a simple and low-cost device to explore new barocaloric materials., This research was funded by Ministerio de Economía y Competitividad MINECO and EU-FEDER (project MAT2017-86453-R), and Xunta de Galicia
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Raman Spectroscopy Studies on the Barocaloric Hybrid Perovskite [(CH₃)₄N][Cd(N₃)₃]

  • Silva, Rosivaldo Xavier da
  • Paschoal, Carlos William de Araujo
  • Santos, Clenilton
  • García-Fernández, Alberto
  • Salgado-Beceiro, Jorge
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Silva, Ariel Nonato Almeida de Abreu
[Abstract] Temperature-dependent Raman scattering and differential scanning calorimetry were applied to the study of the hybrid organic-inorganic azide-perovskite [(CH₃)₄N][Cd(N₃)₃], a compound with multiple structural phase transitions as a function of temperature. A significant entropy variation was observed associated to such phase transitions, |∆S| ~ 62.09 J·kg⁻¹ K⁻¹, together with both a positive high barocaloric (BC) coefficient |δTt/δP| ~ 12.39 K kbar⁻¹ and an inverse barocaloric (BC) coefficient |δTt/δP| ~ −6.52 kbar⁻¹, features that render this compound interesting for barocaloric applications. As for the obtained Raman spectra, they revealed that molecular vibrations associated to the NC₄, N₃⁻ and CH₃ molecular groups exhibit clear anomalies during the phase transitions, which include splits and discontinuity in the phonon wavenumber and lifetime. Furthermore, variation of the TMA⁺ and N₃⁻ modes with temperature revealed that while some modes follow the conventional red shift upon heating, others exhibit an unconventional blue shift, a result which was related to the weakening of the intermolecular interactions between the TMA (tetramethylammonium) cations and the azide ligands and the concomitant strengthening of the intramolecular bondings. Therefore, these studies show that Raman spectroscopy is a powerful tool to gain information about phase transitions, structures and intermolecular interactions between the A-cation and the framework, even in complex hybrid organic-inorganic perovskites with highly disordered phases., The authors thank the Brazilian agencies CNPq (Project No. 431943/2016-8) and FAPEMA, Fundação de Amparo à Pesquisa e ao Desenvolvimento Científico e Tecnológico do Maranhão (Project No. COOPI-07771/17), the Spanish Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017-86453-R and Xunta de Galicia under the project ED431G/09 for financial support towards this work, Brasil. Conselho Nacional de Desenvolvimento Científico e Tecnológico; 431943/2016-8, Fundação de Amparo à Pesquisa e ao Desenvolvimento Científico e Tecnológico do Maranhão (Brasil); COOPI-07771/17, Xunta de Galicia; ED431G/09
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Discovery of Colossal Breathing-Caloric Effect under Low Applied Pressure in the Hybrid Organic–Inorganic MIL-53(Al) Material

  • García Ben, Javier
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Salgado-Beceiro, Jorge
  • Delgado Ferreiro, Ignacio
  • Kolen'ko, Yury V.
  • Castro-García, Socorro
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work, “breathing-caloric” effect is introduced as a new term to define very large thermal changes that arise from the combination of structural changes and gas adsorption processes occurring during breathing transitions. In regard to cooling and heating applications, this innovative caloric effect appears under very low working pressures and in a wide operating temperature range. This phenomenon, whose origin is analyzed in depth, is observed and reported here for the first time in the porous hybrid organic–inorganic MIL-53(Al) material. This MOF compound exhibits colossal thermal changes of ΔS ∼ 311 J K–1 kg–1 and ΔH ∼ 93 kJ kg–1 at room temperature (298 K) and under only 16 bar, pressure which is similar to that of common gas refrigerants at the same operating temperature (for instance, p(CO2) ∼ 64 bar and p(R134a) ∼ 6 bar) and noticeably lower than p > 1000 bar of most solid barocaloric materials. Furthermore, MIL-53(Al) can operate in a very wide temperature range from 333 K down to 254 K, matching the operating requirements of most HVAC systems. Therefore, these findings offer new eco-friendly alternatives to the current refrigeration systems that can be easily adapted to existing technologies and open the door to the innovation of future cooling systems yet to be developed., This work was financially supported by Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00), Xunta de Galicia and IACOBUS Programme. Funding for open access fee was provided by Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Innovative materials chemistry strategies for engineered-enhanced thermomaterials for barocaloric and related solid-state refrigeration

  • García Ben, Javier
[Abstract] The present PhD Thesis focuses on the search of new thermomaterials (materials that have large latent heat associated to a solid-solid phase transition), specifically hybrid organic-inorganic materials, with the aim of exploring their potential use in cooling applications. There is an urgent need to develop alternatives to current refrigeration in order to address the climate and energy challenges that our society is living in order to move towards a carbon-neutral economy with more energy-efficiency, no greenhouse gases emissions, and which relies solely on renewable energy sources. In this context, solid materials are considered attractive options to replace current technologies. Taking this into consideration, the current PhD Thesis investigates three different families of hybrid organic-inorganic materials with potential applications as refrigerants in solid-state refrigeration: hybrid dicyanamide perovskites, hybrid ionic plastic crystals, and metal-organic frameworks (MOFs). On one hand, the structural distortions of hybrid dicyanamide perovskites family were studied and explored, the tolerance factor for this family was revisited, and their first solid solution was prepared. On the other hand, three ionic plastic crystals were tested for their use in barocaloric refrigeration: [Cp2M][PF6] (Cp = C5H5 and M = Fe, Co) and [DBA][BF4] (DBA = dibutylammonium). Lastly, the thermal response of a flexible MOF with a solid-solid phase transition linked to adsorption/desorption of carbon dioxide process upon the application of low pressure was measured: the MIL-53(Al) with general formula [Al(OH)(C8H4O4)]. It is worth noting that in addition to assessing the viability of some materials from these families as solid-state refrigerants, significant emphasis has also been placed on the search for design tools for new materials to provide guidelines that contribute to the development of solid-state refrigeration., [Resumen] La presente Tesis Doctoral se centra en la búsqueda de nuevos termomateriales (materiales que presentan grandes calores latentes asociados a una transición de fase sólido-sólido), en particular materiales híbridos orgánicos-inorgánicos, con el objetivo de explorar su potencial uso para aplicaciones de refrigeración. Existe una urgente necesidad de desarrollar alternativas a la refrigeración actual para hacer frente a los desafíos climáticos y energéticos que nuestra sociedad está viviendo, con el fin de avanzar hacia una economía neutra en carbono, con mayor eficiencia energética, sin emisiones de gases de efecto invernadero y que dependa únicamente de fuentes de energía renovables. En este contexto, los materiales sólidos se consideran una opción muy atractiva para reemplazar las tecnologías actuales. Teniendo esto en cuenta, la presente Tesis Doctoral investigó tres familias diferentes de materiales híbridos orgánicos-inorgánicos con gran potencial para su uso en refrigeración de estado sólido: las perovskitas híbridas de dicianamina, los cristales plásticos híbridos iónicos y las redes metal-orgánicas o MOFs. Por una parte, en las perovskitas de dicianamina se estudiaron y buscaron las distorsiones estructurales, se reevaluó el factor de tolerancia para esta familia y se preparó su primera disolución sólida. Por otra parte, se pusieron a prueba tres cristales plásticos iónicos para su aplicación en refrigeración barocalórica, [Cp2M][PF6] (Cp = C5H5 y M = Fe, Co) y [DBA][BF4] (DBA = dibutilamonio). Por último, se midió la respuesta térmica de un MOF flexible con transición de fase sólido-sólido ligada a la adsorción/desorción de dióxido de carbono tras la aplicación de pequeñas presiones: el MIL-53(Al) con fórmula general [Al(OH)(C8H4O4)]. Cabe a destacar que además de medir la viabilidad de algunos materiales de estas familias como refrigerantes en estado sólido, también se ha hecho gran hincapié en la búsqueda de herramientas para el diseño de nuevos materiales con el fin de mostrar directrices que ayuden al desarrollo de la refrigeración de estado sólido., [Resumo] A presente Tese Doutoral céntrase na busca de novos termomateriais (materiais que presentan grandes calores latentes asociados a unha transición de fase sólido-sólido), en particular materiais híbridos orgánicos-inorgánicos, co obxectivo de explorar o seu potencial uso para aplicacións de refrixeración. Existe unha urxente necesidade de desenvolver alternativas á refrixeración actual para facer fronte aos desafíos climáticos e enerxéticos que a nosa sociedade está vivindo, co fin de avanzar cara a unha economía neutra en carbono, con maior eficiencia enerxética, sen emisións de gases de efecto invernadoiro e que dependa unicamente de fontes de enerxía renovables. Neste contexto, os materiais sólidos considéranse unha opción moi atractiva para substituír as tecnoloxías actuais. Tendo isto en conta, a presente Tese Doutoral investigou tres familias diferentes de materiais híbridos orgánicos-inorgánicos con gran potencial para o seu uso en refrixeración de estado sólido: as perovskitas híbridas de dicianamina, os cristais plásticos híbridos iónicos e as redes metal-orgánicas ou MOFs. Por unha banda, nas perovskitas de dicianamina estudáronse e buscáronse as súas distorsións estruturais, reanalizou o factor de tolerancia para esta familia e preparouse a súa primeira disolución sólida. Por outra banda, puxéronse a proba tres cristais plásticos iónicos para a súa aplicación en refrixeración barocalórica, [Cp2M][PF6] (Cp = C5H5 y M = Fe, Co) y [DBA][BF4] (DBA = dibutilamonio). Por último, mediuse a resposta térmica dun MOF flexible con transición de fase sólido-sólido ligada á adsorción/desorción de dióxido de carbono trala aplicación de pequenas presións: o MIL-53(Al) con fórmula xeral [Al(OH)(C8H4O4)]. Cabe a destacar que ademais de medila viabilidade de algúns materiais de estas familias como refrixerantes en estado sólido, tamén se fixo gran fincapé na busca de ferramentas para o deseño de novos materiais co fin de mostrar directrices que axuden ao desenvolvemento da refrixeración de estado sólido., Xunta de Galicia; ED481A 2020/030, Xunta de Galicia; ED431G/09, Xunta de Galicia; ED431C 2022/39, This PhD Thesis was funded by Predoctoral Xunta de Galicia Fellowship (ED481A 2020/030) and the financial support from the projects MAT2017-86453-R and PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by FEDER Una manera de hacer Europa, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union Next GenerationEU/PRTR and the projects Development of research strategic actions UDC I+D+i 2021-2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool), ED431G/09 and ED431C 2022/39 funded by Xunta de Galicia. During this PhD Thesis there were collaborations with Nanochem research group of the International Iberian Nanotechnology Laboratory (INL) of Braga, Portugal during a 3-months research stay funded by IACOBUS Program, with Phillips Group of the Queen Mary University of London (QMUL), United Kingdom during another 3-months research stay funded by Xunta de Galicia, and with Tomoyuki Mochida Group of the Kobe University of Kobe, Japan during 1.5-months research stay funded by scholarships for predoctoral stays of Inditex-UDC 2022.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multifunctional Properties and Multi-Energy Storage in the [(CH₃)₃S][FeCl₄] Plastic Crystal

  • Salgado-Beceiro, Jorge
  • Bermúdez-García, Juan Manuel
  • Llamas-Saiz, Antonio L.
  • Castro-García, Socorro
  • Señarís-Rodríguez, M. A.
  • Rivadulla, Francisco
  • Sánchez-Andújar, Manuel
This is an accepted version of the published document. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/D0TC04044D., Electronic supplementary information (ESI) available: PXRD patterns obtained at room temperature and thermogravimetric curves, additional crystallographic figures and tables are available online. CCDC 2000618–2000623 (http://xlink.rsc.org/?ccdc=2000618-2000623&msid=d0tc04044d). For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/d0tc04044d, [Abstract] In this work, we report a new halometallate [(CH₃)₃S][FeCl₄] with plastic crystal behaviour as a new material for multi-energy storage. This material undergoes a first-order solid–solid plastic crystal phase transition near room temperature with a relatively large latent heat (∼40 kJ kg‾¹) and an operational temperature for storing and releasing thermal energy between 42 °C (315 K) and 29 °C (302 K), very appropriate for solar thermal energy storage. In addition, the dielectric, magnetization and electron spin resonance studies reveal that this material exhibits multifunctional properties with temperature-induced reversible changes in its dielectric, conducting and magnetic behaviour associated with the phase transition. Also, the dielectric permittivity increases sharply up to 5 times when inducing the phase transition, which can be exploited to store electric energy into a capacitor. Therefore, [(CH₃)₃S][FeCl₄] is a very interesting compound with the coexistence of multifunctional properties that can be useful for both solar thermal and electric energy storage., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017-86453-R and Xunta de Galicia under the project ED431G/09. F. R. acknowledges support from the Ministry of Science of Spain (Project No. MAT2016-80762-R), the Consellería de Cultura, Educación e Ordenación Universitaria (ED431F 2016/008, and Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09), the Xunta de Galicia (ED431B 2018/16) and the European Regional Development Fund (ERDF). J. M. B.-G. acknowledges Xunta de Galicia for a postdoctoral fellowship, Xunta de Galicia; ED431G/09, Xunta de Galicia; ED431F 2016/008, Xunta de Galicia; ED431G/09, Xunta de Galicia; ED431B 2018/16, http://xlink.rsc.org/?ccdc=2000618-2000623&msid=d0tc04044d
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Anomalous and Colossal Thermal Expansion, Photoluminescence, and Dielectric Properties in Lead Halide-Layered Perovskites With Cyclohexylammonium and Cyclopentylammonium Cations

  • Cuquejo-Cid, Alberto
  • García-Fernández, Alberto
  • Popescu, Catalin
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
  • Castro-García, Socorro
  • Vázquez, Digna
  • Sánchez-Andújar, Manuel
[Abstract] A detailed study of lead halide-layered perovskites with general formula A2PbX4 (where A is cyclohexylammonium (CHA) or cyclopentylammonium (CPA) cation and X is Cl− or Br− anion) is presented. Using variable temperature synchrotron X-ray powder diffraction, we observe that these compounds exhibit diverse crystal structures above room temperature. Very interestingly, we report some unconventional thermomechanical responses such as uniaxial negative thermal expansion and colossal positive thermal expansion in a perpendicular direction. For the polymorphs of (CHA)2PbBr4, the volumetric thermal expansion coefficient is among the highest reported for any extended inorganic crystalline solid, reaching 480 MK−1. The phase transitions are confirmed by calorimetry and dielectric measurements, where the dielectric versus temperature curves show anomalies related with the order-disorder phase transitions. In addition, these compounds exhibit a broad photoluminescence (PL) emission with a large Stokes shift, which is related with an exciton PL emission., This work was financially supported by the Ministerio de Ciencia e Innovación (MICINN) and EU-ERDF under the projects MAT2017-86453-R and PDC2021-121076-I00. We thank Alba synchrotron for the provision of beamtime at BL04-MSPD beamline (experiment 2019023280). We also thank prof. Dr. R. Artiaga and Dr. J.J. López-Beceiro (University of A Coruña) for assistance during DSC measurements. J.M.B.G. thanks Xunta de Galicia for a postdoctoral fellowship
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Dicyanamide-Perovskites at the Edge of Dense Hybrid Organic–Inorganic Materials

  • García Ben, Javier
  • McHugh, Lauren Nicole
  • Bennett, Thomas Douglas
  • Bermúdez-García, Juan Manuel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Hybrid organic–inorganic ABX3 perovskites with dicyanamide-ligands (dca: [N(CN)2]−) on the X-site are emerging as a distinct group of materials courtesy of their multifunctional properties. Here we present an in-depth analysis of the members of this dicyanamide perovskite family, where the presence of the 5 atom-long dca ligand gives rise to relatively open crystal structures - especially when compared with other dense hybrids such as perovskite formates, and which has a profound influence on their chemistry and properties. We compile the synthetic procedures used to obtain these compounds, along with their chemical and structural properties. In terms of their functional properties, dicyanamide-perovskites have already shown an enormous potential for future applications, such as dielectric or magnetic switches, eco-friendly barocaloric refrigerants at low-pressure and room-temperature, or precursors for oil-recovery nanomaterials and thermoelectric glasses, as reviewed here. Additionally, we highlight several emerging phenomena in this family, and anticipate areas with room for development in the field., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017-86453-R, and funding for open access charge was covered by Universidade da Coruña/CISUG J. G.-B. and J. M. B.-G. acknowledges Xunta de Galicia for a Predoctoral and Postdoctoral Fellowships, respectivetly. T.D.B. thanks the Royal Society for a University Research Fellowship (UF150021) and the University of Canterbury Te Whare Wānanga o Waitaha, New Zealand, for a University of Cambridge Visiting Canterbury Fellowship. He would also like to acknowledge, alongside L.N.M, the Leverhulme Trust for a Philip Leverhulme Prize, Reino Unido. Royal Society; UF150021
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Structural, Thermal and Functional Properties of a Hybrid Dicyanamide-Perovskite Solid Solution

  • García Ben, Javier
  • Salgado-Beceiro, Jorge
  • Delgado Ferreiro, Ignacio
  • Dafonte Rodríguez, Pedro
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
[Abstract]: In Solid-State Chemistry, a well-known route to obtain new compounds and modulate their properties is the formation of solid solutions, a strategy widely exploited in the case of classical inorganic perovskites but relatively unexplored among emergent hybrid organic–inorganic perovskites (HOIPs). In this work, to the best of our knowledge, we present the first dicyanamide-perovskite solid solution of [TPrA][Co0.5Ni0.5(dca)3] and study its thermal, dielectric and optical properties, comparing them with those of the parent undoped compounds [TPrA][Co(dca)3] and [TPrA][Ni(dca)3]. In addition, we show that the prepared doped compound can be used as a precursor that, by calcination, allows CNTs with embedded magnetic Ni:Co alloy nanoparticles to be obtained through a fast and much simpler synthetic route than other complex CVD or arc-discharge methods used to obtain this type of material., M.A.S.-R. sincerely thanks Emilio Morán Miguélez for all of his teaching, advice, support, friendship and vital optimism during her Ph.D period in Madrid, as well as throughout the years. We will always remember him with gratitude and with a big smile. From the financial point of view, the authors are thankful for financial support from Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00) and Xunta de Galicia for the collaboration agreement “Development of research strategic actions UDC I + D + i 2021–2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool)”. J.G.-B. and J.M.B.-G. acknowledge Xunta de Galicia for Predoctoral and Postdoctoral Fellowships, respectively. I.D.-F thanks Ministerio de Universidades for an FPU Predoctoral Fellowship. The authors also thank Universidade da Coruña/CISUG for funding for the open access of this manuscript.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Hybrid Lead Halide [(CH₃)₂NH₂]PbX₃ (X = Cl⁻ and Br⁻) Hexagonal Perovskites With Multiple Functional Properties

  • García-Fernández, Alberto
  • Juárez-Pérez, Emilio J.
  • Bermúdez-García, Juan Manuel
  • Llamas-Saiz, Antonio L.
  • Artiaga, Ramón
  • López-Beceiro, Jorge
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Castro-García, Socorro
This is an accepted version of the published document. This version of the article has been accepted for publication, after peer review, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1039/C9TC03543E, [Abstract] We have been able to prepare two new lead halides with the formula DMAPbX₃ (where DMA is dimethylammonium and X is Cl⁻ or Br⁻), which display a 4H-hexagonal perovskite polytype, an unusual crystal structure in hybrid organic–inorganic perovskites. Both compounds experience a first-order phase transition, the chloride at ∼320 K and the bromide at ∼250 K, which involves two cooperative processes: an off-center shift of the lead cations and an order–disorder process of the DMA cations. Additionally, a sharp dielectric transition is associated with this structural transition in both hybrids. Both compounds are semiconductors with band gap values of 3.5 eV (X: Cl⁻) and 3.0 eV (X: Br⁻). Also, the LT-phase of the Br⁻ compound displays a broad red light photoluminescence (PL) emission (620 nm) and PLE excitation with the maximum at a soft UV wavelength (360 nm). This broadband emission and large Stokes-shifted PL seem to be related to a self-trapped exciton mechanism. Therefore, the uncommon 4H-hexagonal perovskite is a promising crystal structure for understanding and designing new hybrid materials with broad photoluminescent emission and dielectric properties., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017-86453-R and Xunta de Galicia under the project ED431C2018/39. J. M. B.-G. acknowledges Xunta de Galicia for a Postdoctoral Fellowship, Xunta de Galicia; ED431C2018/39
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Photoluminescent and Vapochromic Properties of the Mn(II)-Doped (C6H11NH3)2PbBr4 Layered Organic–Inorganic Hybrid Perovskite

  • Cuquejo-Cid, Alberto
  • García-Fernández, Alberto
  • García Ben, Javier
  • Señarís-Rodríguez, M. A.
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Vázquez, Digna
This is an accepted version of the following published document: Cuquejo-Cid, A., García-Fernández, A., García-Ben, J., Señarís-Rodríguez, M.A., Castro-García, S., Sánchez-Andújar, M., Vázquez-García, D., 2021. Photoluminescent and vapochromic properties of the Mn(II)-doped (C6H11NH3)2PbBr4 layered organic–inorganic hybrid perovskite. Polyhedron 193, 114840. https://doi.org/10.1016/j.poly.2020.114840, [Abstract] By a wet-chemistry route we have been able to effectively dope the CHA2PbBr4 compound, a ferroelectric compound with photovoltaic effect, with different amounts of Mn2+ obtaining three pure compounds CHA2Pb1-xMnxBr4 with x = 0.05, 0.07 and 0.11. At room temperature the crystal structure of these new Mn-doped compounds present an orthorhombic symmetric with polar space group Cmc21, as in the case of the undoped compoud (x = 0). Very interestingly, the doped compounds exhibit a broad PL emissions at room temperature, with a maximum around 605 nm and a long PL lifetime (~0.55 ms), whose intensity increases further upon cooling. The observed PL emission is induced from an energy transfer from host semiconductor to the d-orbitals of Mn2+ cation. In addition, we have explored the capability of these materials to act as chemical sensors for volatile organic compounds and report the selective luminescence vapochromic response in this family of compounds. Therefore, the here presented Mn-doped CHA2Pb1-xMnxBr4 compounds belong to the scarce and desirable group of multifunctional materials, where not only ferroelectric and photovoltaic properties can coexist but also photoluminescence and vapochromic properties, rendering them extremely interesting for a large number of potential practical applications., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017-86453-R and Xunta de Galicia under the project ED431G/09, Xunta de Galicia; ED431G/09
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Atypical Magnetic Behavior in the Incommensurate (CH3NH3)[Ni(HCOO)3] Hybrid Perovskite

  • Breogán Pato, Doldán
  • Cañadillas-Delgado, Laura
  • Gómez Aguirre, Lilián Claudia
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Fabelo, Óscar
  • Mira Pérez, Jorge
[Abstract] A plethora of temperature-induced phase transitions have been observed in (CH3NH3)[M(HCOO)3] compounds, where M is Co(II) or Ni(II). Among them, the nickel compound exhibits a combination of magnetic and nuclear incommensurability below Néel temperature. Despite the fact that the zero-field behavior has been previously addressed, here we study in depth the macroscopic magnetic behavior of this compound to unveil the origin of the atypical magnetic response found in it and in its parent family of formate perovskites. In particular, they show a puzzling magnetization reversal in the curves measured starting from low temperatures, after cooling under zero field. The first atypical phenomenon is the impossibility of reaching zero magnetization, even by nullifying the applied external field and even compensating it for the influence of the Earth’s magnetic field. Relatively large magnetic fields are needed to switch the magnetization from negative to positive values or vice versa, which is compatible with a soft ferromagnetic system. The atypical path found in its first magnetization curve and hysteresis loop at low temperatures is the most noticeable feature. The magnetization curve switches from more than 1200 Oe from the first magnetization loop to the subsequent magnetization loops. A feature that cannot be explained using a model based on unbalanced pair of domains. As a result, we decipher this behavior in light of the incommensurate structure of this material. We propose, in particular, that the applied magnetic field induces a magnetic phase transition from a magnetically incommensurate structure to a magnetically modulated collinear structure., The authors thank financial support from the Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC 2021-121076-I00). The authors are grateful to Dra. Ana Arauzo at Servicio de Medidas Físicas of the Universidad de Zaragoza for heat capacity data. O.F. acknowledges the Spanish Ministry of Universities (UNI/551/2021) and the European Union through the Funds Next Generation
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Hybrid organic-inorganic perovskites: a spin-off of oxidic perovskites

  • García-Fernández, Alberto
  • Juárez-Pérez, Emilio J.
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Señarís-Rodríguez, María Antonia
ABX3 compounds with perovskite structure have been intensively and extensively studied in the last decades in view of their structural richness and amazing variety of interesting properties, such as piezoelectricity, ferroelectricity, ferromagnetism, superconductivity, magnetoresistance, multiferroicity, etc. In this chapter, we recompile well established chemical and structural concepts in pure inorganic perovskites (mainly oxidic perovskites), and extend them to the young family of hybrid organic-inorganic perovskites. Our final goal is to help understanding the relationships among composition, crystal structure and properties in this new family of compounds, for inspiring further the design of novel materials., This work was financially supported by the Ministerio de Economía y Competitividad (MINECO) and EU-FEDER under the project MAT2017 -86453-R and Xunta de Galicia under the project ED431 G/09. A. García-Fernández acknowledges Carl Tryggers Stiftelse for a Postdoctoral Fellowship., Peer reviewed