Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Atypical Magnetic Behavior in the Incommensurate (CH3NH3)[Ni(HCOO)3] Hybrid Perovskite

  • Pato Doldán, Breogán
  • Cañadillas Delgado, Laura
  • Gómez Aguirre, Lilián Claudia
  • Señarís Rodríguez, María Antonia
  • Sánchez Andújar, Manuel
  • Fabelo, Óscar
  • Mira Pérez, Jorge
A plethora of temperature-induced phase transitions have been observed in (CH3NH3)[M(HCOO)3] compounds, where M is Co(II) or Ni(II). Among them, the nickel compound exhibits a combination of magnetic and nuclear incommensurability below Néel temperature. Despite the fact that the zero-field behavior has been previously addressed, here we study in depth the macroscopic magnetic behavior of this compound to unveil the origin of the atypical magnetic response found in it and in its parent family of formate perovskites. In particular, they show a puzzling magnetization reversal in the curves measured starting from low temperatures, after cooling under zero field. The first atypical phenomenon is the impossibility of reaching zero magnetization, even by nullifying the applied external field and even compensating it for the influence of the Earth’s magnetic field. Relatively large magnetic fields are needed to switch the magnetization from negative to positive values or vice versa, which is compatible with a soft ferromagnetic system. The atypical path found in its first magnetization curve and hysteresis loop at low temperatures is the most noticeable feature. The magnetization curve switches from more than 1200 Oe from the first magnetization loop to the subsequent magnetization loops. A feature that cannot be explained using a model based on unbalanced pair of domains. As a result, we decipher this behavior in light of the incommensurate structure of this material. We propose, in particular, that the applied magnetic field induces a magnetic phase transition from a magnetically incommensurate structure to a magnetically modulated collinear structure
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Structure and thermal property relationships in the thermomaterial di-n-butylammonium tetrafluoroborate for multipurpose cooling and cold-storage

  • García Ben, Javier
  • Bermúdez-García, Juan Manuel
  • Delgado Ferreiro, Ignacio
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • García-Fernández, Alberto
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Señarís-Rodríguez, M. A.
[Abstract] Nowadays around 46% of food production around the world requires refrigeration, which is generally provided either by active vapour-compression (based on refrigerants with liquid–gas transitions) or passive cold-storage (based on solid-to-liquid phase change materials, SL-PCMs). However, in order to avoid fluid losses during the transitions, new thermomaterials with solid–solid transitions are desired for both applications. In this work, we find that [DBA][BF4] (DBA = di-n-butylammonium) is a promising thermomaterial with solid–solid phase transitions. This compound presents thermal properties of great interest not only for active barocaloric refrigeration, but also for passive cold-storage, which make this a unique multipurpose thermomaterial. The observed cold-storage capacity is very close to that of commercial SL-PCMs (E ∼ 135 kJ kg−1), while the pressure-induced thermal changes (ΔS ∼ [200–270] J K−1 kg−1) are superior to those of most barocaloric materials, operating under lower pressures (p ∼ [500–1000] bar). Moreover, the operating temperature range of this material is very adequate for food preservation (250–310 K), which is a great advantage over most barocaloric materials. Beyond the thermal properties, we perform deep structural characterization, which reveals a progressive structural disorder of the [DBA]+ cations and [BF4]− anions as the origin of such thermal properties, which will help the future rational design of enhanced thermomaterials., The authors acknowledge financial support from the project PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033/and by FEDER Una manera de hacer Europa, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union Next Generation EU/PRTR and the project ED431C 2022/39 funded by Xunta de Galicia. This publication is part of the grant RYC2021-033040-I, funded by MCIN/AEI/10.13039/501100011033 and from European Union «NextGenerationEU»/PRTR», and granted to J. M. B. G. This researcher is also grateful for the support received from the UDC-Inditex InTalent Programme. J. G.-B. acknowledge Xunta de Galicia for Predoctoral Fellowship. I. D.-F. thanks Ministerio de Universidades for a FPU Predoctoral Fellowship. A. G.-F. and U. B. C. acknowledge the financial support of the Göran Gustafsson foundation. R. J. C. D. and A. E. P. would like to acknowledge the financial support of EPSRC throughout the provision of the funding (EP/S03577X/1). The authors thank the Diamond Light Source for the award of beamtime (CY30448-1 on I11), and Eamonn Connolly for his assistance in the experiment. The authors also thank Xavier Moya from the Department of Materials Science at the University of Cambridge, for granting access to his lab for preliminary VP-DSC measurements on still non-stable and wet samples and the use of the analytical facilities available at the Research Infrastructures Area of the University of Santiago de Compostela.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Narrowing the Tolerance Factor Limits for Hybrid Organic-Inorganic Dicyanamide-Perovskites

  • García Ben, Javier
  • García-Fernández, Alberto
  • Dafonte Rodríguez, Pedro
  • Delgado Ferreiro, Ignacio
  • Cappel, Ute
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
[Abstract] In this work we focus in setting the limits of the tolerance factor and the size of the A-cations that stabilize the perovskite structure in hybrid dicyanamide compounds [A][Mn(dca)3]. For this purpose, we propose an alternative, simple approach to calculate a more realistic effective ionic radius for the large and anisotropic A-cations often present in these type of compounds. We test the proposed procedure by analysing the crystal structures of [A][Mn(dca)3] dicyanamide hybrids reported in the literature and recalculating the tolerance factors of such compounds, as well as by preparing five new [A][Mn(dca)3] members, discussing also the influence of the A-cation shape in the stability limits of the perovskite structure. Interestingly, such methodology is not only useful to develop new compounds of the emerging family of (multi)functional multi(stimuli)-responsive dicyanamide materials but can also be applied to other hybrid organic-inorganic perovskites and related materials., As for financial support, the authors thank Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00), and Xunta de Galicia for the collaboration agreement “Development of research strategic actions Universidade da Coruña I ​+ ​D ​+ ​i 2021–2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool). J.G.-B. and J.M.B.-G. acknowledge Xunta de Galicia for Predoctoral and Postdoctoral Fellowships, respectively. I.D.-F thanks Ministerio de Universidades for a FPU Predoctoral Fellowship. A. G.-F. and U.B.C thank the Carl Tryggers foundation and the Göran Gustafsson foundation for financial support
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Discovery of Colossal Breathing-Caloric Effect under Low Applied Pressure in the Hybrid Organic–Inorganic MIL-53(Al) Material

  • García Ben, Javier
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Salgado-Beceiro, Jorge
  • Delgado Ferreiro, Ignacio
  • Kolen'ko, Yury V.
  • Castro-García, Socorro
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work, “breathing-caloric” effect is introduced as a new term to define very large thermal changes that arise from the combination of structural changes and gas adsorption processes occurring during breathing transitions. In regard to cooling and heating applications, this innovative caloric effect appears under very low working pressures and in a wide operating temperature range. This phenomenon, whose origin is analyzed in depth, is observed and reported here for the first time in the porous hybrid organic–inorganic MIL-53(Al) material. This MOF compound exhibits colossal thermal changes of ΔS ∼ 311 J K–1 kg–1 and ΔH ∼ 93 kJ kg–1 at room temperature (298 K) and under only 16 bar, pressure which is similar to that of common gas refrigerants at the same operating temperature (for instance, p(CO2) ∼ 64 bar and p(R134a) ∼ 6 bar) and noticeably lower than p > 1000 bar of most solid barocaloric materials. Furthermore, MIL-53(Al) can operate in a very wide temperature range from 333 K down to 254 K, matching the operating requirements of most HVAC systems. Therefore, these findings offer new eco-friendly alternatives to the current refrigeration systems that can be easily adapted to existing technologies and open the door to the innovation of future cooling systems yet to be developed., This work was financially supported by Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00), Xunta de Galicia and IACOBUS Programme. Funding for open access fee was provided by Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Energy Efficiency Operational Indicator Resilient, Ship Emissions under Control

  • Fraguela, Feliciano
  • Díaz Casás, Vicente
  • Zaragoza, Sonia
  • Barreiro Montes, Julio
[Abstract] Maritime transport is the most widely used means of transporting goods, and forecasts indicate that it will continue to grow in the coming years, which is why the IMO is regulating energy efficiency and emissions from maritime transport with exhaustive monitoring. The most widely used measure of energy efficiency during operation on a ship is the Energy Efficiency Operational Indicator (EEOI); however, the difficulty in obtaining references for this indicator, together with the great variability that exists between shipowners when choosing terms such as “cargo transported”, among others, means that this operational indicator of energy efficiency in ships does not have the expected results. This work develops a two-phase procedure for the selection of representative EEOI values for ships, taking into account parameters such as ship speed, cargo, mode of operation and the subsequent determination of a suitable control system that allows the continuous and real-time implementation of measures to improve energy and environmental efficiency on the ship. The proposed final procedure is effective in terms of improving energy efficiency and emissions, on top of being simple, easily implementable, working in real time and adapting to navigation circumstances while keeping emissions under control., Funding: The authors are thankful for financial support from the grant PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR and the project ED431C 2022/39 funded by Xunta de Galicia. This publication is part of the grant RYC2021-033040-I, funded by MCIN/AEI/10.13039/501100011033 and from the European Union «NextGenerationEU»/PRTR., Xunta de Galicia; ED431C 2022/39
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Unveiling Barocaloric Potential in Organometallic-Sandwich Compounds [Cp₂M][PF₆] (M: Fe³⁺, Co³⁺)

  • García Ben, Javier
  • Delgado Ferreiro, Ignacio
  • Dixey, Richard J.C.
  • Castro-García, Socorro
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Sánchez-Andújar, Manuel
  • Phillips, Anthony E.
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
[Abstract] Organometallic-sandwich salts are well-known materials that undergo order–disorder phase transitions, leading to a high-temperature phase characterized by the total or partial disorder of ionic species. Their potential for barocaloric applications has not previously been explored. Here, we focus on two salts derived from metallocenes with the formula [Cp₂M][PF₆] where Cp: cyclopentadienyl anion (C₅H₅)‾ and M: Fe³⁺ or Co³⁺. These molecular salts exhibit two solid–solid phase transitions, shifting from a well-ordered crystalline phase at low temperatures to an orientationally disordered phase in the case of the Fe-compound, and a partially disordered phase in the case of the Co-compound above room temperature. We find a significant entropy change (∼40 J K‾¹ kg‾¹) and a moderate volume change (∼2%) associated with these phase transitions. Additionally, we observe that these transitions are highly sensitive to external applied pressure, leading to substantial barocaloric effects (exceeding 20 K kbar‾¹). Very interestingly, we obtain substantial values for reversible adiabatic temperature change (ΔTᵣₑᵥ > 10 K) under an applied pressure as low as 1 kbar, comparable to those observed in the most promising barocaloric materials. We prove that the unique structure and chemical bonding of these sandwich organometallic cations are responsible for their interesting and unusual barocaloric response. These findings position the metallocenium family as promising candidates for eco-friendly solid-state refrigeration technologies., The authors thank financial support from grant PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR, and the projects ED431C 2022/39 and ED431F 2023/33 funded by Xunta de Galicia. This publication is part of the grant RYC2021-033040-I, funded by MCIN/AEI/10.13039/501100011033 and from European Union «NextGenerationEU»/PRTR». J. G. B. thanks Xunta de Galicia for postdoctoral fellowship ED481B/2024. J. M. B. G. is grateful for the support received by UDC-Inditex InTalent Programme. R. J. C. D. and A. E. P. would like to thank the financial support of EPSRC throughout provision of the funding (EP/S03577X/1). The authors thank Diamond Light Source for the award of beamtime (CY30448-1 on I11), and Eamonn Connolly for his assistance on the experiment., Xunta de Galicia; ED431C 2022/39, Xunta de Galicia; ED431F 2023/33, Xunta de Galicia; ED481B/2024, Reino Unido. Engineering and Physical Sciences Research Council (EPSRC); EP/S03577X/1
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Innovative materials chemistry strategies for engineered-enhanced thermomaterials for barocaloric and related solid-state refrigeration

  • García Ben, Javier
[Abstract] The present PhD Thesis focuses on the search of new thermomaterials (materials that have large latent heat associated to a solid-solid phase transition), specifically hybrid organic-inorganic materials, with the aim of exploring their potential use in cooling applications. There is an urgent need to develop alternatives to current refrigeration in order to address the climate and energy challenges that our society is living in order to move towards a carbon-neutral economy with more energy-efficiency, no greenhouse gases emissions, and which relies solely on renewable energy sources. In this context, solid materials are considered attractive options to replace current technologies. Taking this into consideration, the current PhD Thesis investigates three different families of hybrid organic-inorganic materials with potential applications as refrigerants in solid-state refrigeration: hybrid dicyanamide perovskites, hybrid ionic plastic crystals, and metal-organic frameworks (MOFs). On one hand, the structural distortions of hybrid dicyanamide perovskites family were studied and explored, the tolerance factor for this family was revisited, and their first solid solution was prepared. On the other hand, three ionic plastic crystals were tested for their use in barocaloric refrigeration: [Cp2M][PF6] (Cp = C5H5 and M = Fe, Co) and [DBA][BF4] (DBA = dibutylammonium). Lastly, the thermal response of a flexible MOF with a solid-solid phase transition linked to adsorption/desorption of carbon dioxide process upon the application of low pressure was measured: the MIL-53(Al) with general formula [Al(OH)(C8H4O4)]. It is worth noting that in addition to assessing the viability of some materials from these families as solid-state refrigerants, significant emphasis has also been placed on the search for design tools for new materials to provide guidelines that contribute to the development of solid-state refrigeration., [Resumen] La presente Tesis Doctoral se centra en la búsqueda de nuevos termomateriales (materiales que presentan grandes calores latentes asociados a una transición de fase sólido-sólido), en particular materiales híbridos orgánicos-inorgánicos, con el objetivo de explorar su potencial uso para aplicaciones de refrigeración. Existe una urgente necesidad de desarrollar alternativas a la refrigeración actual para hacer frente a los desafíos climáticos y energéticos que nuestra sociedad está viviendo, con el fin de avanzar hacia una economía neutra en carbono, con mayor eficiencia energética, sin emisiones de gases de efecto invernadero y que dependa únicamente de fuentes de energía renovables. En este contexto, los materiales sólidos se consideran una opción muy atractiva para reemplazar las tecnologías actuales. Teniendo esto en cuenta, la presente Tesis Doctoral investigó tres familias diferentes de materiales híbridos orgánicos-inorgánicos con gran potencial para su uso en refrigeración de estado sólido: las perovskitas híbridas de dicianamina, los cristales plásticos híbridos iónicos y las redes metal-orgánicas o MOFs. Por una parte, en las perovskitas de dicianamina se estudiaron y buscaron las distorsiones estructurales, se reevaluó el factor de tolerancia para esta familia y se preparó su primera disolución sólida. Por otra parte, se pusieron a prueba tres cristales plásticos iónicos para su aplicación en refrigeración barocalórica, [Cp2M][PF6] (Cp = C5H5 y M = Fe, Co) y [DBA][BF4] (DBA = dibutilamonio). Por último, se midió la respuesta térmica de un MOF flexible con transición de fase sólido-sólido ligada a la adsorción/desorción de dióxido de carbono tras la aplicación de pequeñas presiones: el MIL-53(Al) con fórmula general [Al(OH)(C8H4O4)]. Cabe a destacar que además de medir la viabilidad de algunos materiales de estas familias como refrigerantes en estado sólido, también se ha hecho gran hincapié en la búsqueda de herramientas para el diseño de nuevos materiales con el fin de mostrar directrices que ayuden al desarrollo de la refrigeración de estado sólido., [Resumo] A presente Tese Doutoral céntrase na busca de novos termomateriais (materiais que presentan grandes calores latentes asociados a unha transición de fase sólido-sólido), en particular materiais híbridos orgánicos-inorgánicos, co obxectivo de explorar o seu potencial uso para aplicacións de refrixeración. Existe unha urxente necesidade de desenvolver alternativas á refrixeración actual para facer fronte aos desafíos climáticos e enerxéticos que a nosa sociedade está vivindo, co fin de avanzar cara a unha economía neutra en carbono, con maior eficiencia enerxética, sen emisións de gases de efecto invernadoiro e que dependa unicamente de fontes de enerxía renovables. Neste contexto, os materiais sólidos considéranse unha opción moi atractiva para substituír as tecnoloxías actuais. Tendo isto en conta, a presente Tese Doutoral investigou tres familias diferentes de materiais híbridos orgánicos-inorgánicos con gran potencial para o seu uso en refrixeración de estado sólido: as perovskitas híbridas de dicianamina, os cristais plásticos híbridos iónicos e as redes metal-orgánicas ou MOFs. Por unha banda, nas perovskitas de dicianamina estudáronse e buscáronse as súas distorsións estruturais, reanalizou o factor de tolerancia para esta familia e preparouse a súa primeira disolución sólida. Por outra banda, puxéronse a proba tres cristais plásticos iónicos para a súa aplicación en refrixeración barocalórica, [Cp2M][PF6] (Cp = C5H5 y M = Fe, Co) y [DBA][BF4] (DBA = dibutilamonio). Por último, mediuse a resposta térmica dun MOF flexible con transición de fase sólido-sólido ligada á adsorción/desorción de dióxido de carbono trala aplicación de pequenas presións: o MIL-53(Al) con fórmula xeral [Al(OH)(C8H4O4)]. Cabe a destacar que ademais de medila viabilidade de algúns materiais de estas familias como refrixerantes en estado sólido, tamén se fixo gran fincapé na busca de ferramentas para o deseño de novos materiais co fin de mostrar directrices que axuden ao desenvolvemento da refrixeración de estado sólido., Xunta de Galicia; ED481A 2020/030, Xunta de Galicia; ED431G/09, Xunta de Galicia; ED431C 2022/39, This PhD Thesis was funded by Predoctoral Xunta de Galicia Fellowship (ED481A 2020/030) and the financial support from the projects MAT2017-86453-R and PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by FEDER Una manera de hacer Europa, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union Next GenerationEU/PRTR and the projects Development of research strategic actions UDC I+D+i 2021-2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool), ED431G/09 and ED431C 2022/39 funded by Xunta de Galicia. During this PhD Thesis there were collaborations with Nanochem research group of the International Iberian Nanotechnology Laboratory (INL) of Braga, Portugal during a 3-months research stay funded by IACOBUS Program, with Phillips Group of the Queen Mary University of London (QMUL), United Kingdom during another 3-months research stay funded by Xunta de Galicia, and with Tomoyuki Mochida Group of the Kobe University of Kobe, Japan during 1.5-months research stay funded by scholarships for predoctoral stays of Inditex-UDC 2022.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Internet of Things in Energy-Sensitive Processes: Application in a Refrigerated Warehouse

  • Barreiro Montes, Julio
  • Zaragoza, Sonia
  • Díaz Casás, Vicente
[Abstract]: This article aims to address an existing research gap in the study of the most widely used mathematical procedures in the field of automatic control of energy-sensitive industrial processes. In these types of processes, as is the case of cold storage in the food sector or the pharmaceutical industry, applying energy efficiency measures is very risky. This is because the margin of variation in the temperature of the processes is very small, since the product to be manufactured or preserved is very sensitive. This is where the developments of the Internet of the Things showcase their usefulness because they allow measurements to be taken with great accuracy and to verify the effectiveness of energy efficiency proposals. Nevertheless, there are very few studies and developments on automation measures in energetically sensitive industries. This is the research gap that the present work aims to shed light on, proposing a method for optimizing the process of automatic revision in a refrigerated food warehouse. Said method prominently employs control charts, as they allow for a relatively easy set up and require minimal intervention but can be revised manually if so desired. The analysis also includes an auxiliary variable that measures the impact of the variations in the system. Improvements are also provided to the procedures and variables, with which the most commonly used methods of efficiency control in the industry can maintain good results in energy-sensitive industries. Finally, the best selection of charts for the chosen variables is then discussed and justified., Xunta de Galicia; ED481A 2021/312, Xunta de Galicia; ED431C 2021/39, This work was supported in part by the Governmental Institution ‘‘Xunta de Galicia’’ funded by ‘‘Consellería de Cultura, Educación y Universidad y de la Vicepresidencia Segunda’’ and the ‘‘Consellería de Economía, Empresa e Innovación’’ through Predoctoral Internships under Project ED481A 2021/312 and Project ED431C 2021/39; and in part by the Ministerio de Ciencia e Innovación under Grant PDC2021-121076-I00.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Anomalous and Colossal Thermal Expansion, Photoluminescence, and Dielectric Properties in Lead Halide-Layered Perovskites With Cyclohexylammonium and Cyclopentylammonium Cations

  • Cuquejo-Cid, Alberto
  • García-Fernández, Alberto
  • Popescu, Catalin
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
  • Castro-García, Socorro
  • Vázquez, Digna
  • Sánchez-Andújar, Manuel
[Abstract] A detailed study of lead halide-layered perovskites with general formula A2PbX4 (where A is cyclohexylammonium (CHA) or cyclopentylammonium (CPA) cation and X is Cl− or Br− anion) is presented. Using variable temperature synchrotron X-ray powder diffraction, we observe that these compounds exhibit diverse crystal structures above room temperature. Very interestingly, we report some unconventional thermomechanical responses such as uniaxial negative thermal expansion and colossal positive thermal expansion in a perpendicular direction. For the polymorphs of (CHA)2PbBr4, the volumetric thermal expansion coefficient is among the highest reported for any extended inorganic crystalline solid, reaching 480 MK−1. The phase transitions are confirmed by calorimetry and dielectric measurements, where the dielectric versus temperature curves show anomalies related with the order-disorder phase transitions. In addition, these compounds exhibit a broad photoluminescence (PL) emission with a large Stokes shift, which is related with an exciton PL emission., This work was financially supported by the Ministerio de Ciencia e Innovación (MICINN) and EU-ERDF under the projects MAT2017-86453-R and PDC2021-121076-I00. We thank Alba synchrotron for the provision of beamtime at BL04-MSPD beamline (experiment 2019023280). We also thank prof. Dr. R. Artiaga and Dr. J.J. López-Beceiro (University of A Coruña) for assistance during DSC measurements. J.M.B.G. thanks Xunta de Galicia for a postdoctoral fellowship
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Tuning Multifunctional Stimuli-Responsive Behaviour Through Halogen Exchange in Hybrid Ionic [(CH3CH2)3N(CH2X)]2[MnCl4] (X = Cl, Br)

  • García Ben, Javier
  • Gelpi, María
  • Dafonte Rodríguez, Pedro
  • Ferradanes Martínez, Ángel
  • Delgado Ferreiro, Ignacio
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Llamas-Saiz, Antonio L.
  • Walker, Julian
  • McMonagle, Charles James
  • García-Fernández, Alberto
  • Cappel, Ute
  • Castro-García, Socorro
  • Señarís-Rodríguez, M. A.
  • Bermúdez-García, Juan Manuel
  • Sánchez-Andújar, Manuel
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Hybrid metal halide materials have attracted significant attention due to their diverse functional properties. In this study, we prepared, characterized, and evaluated the multifunctional properties of two hybrid tetrachloromanganate(II) compounds with the general formula [(CH3CH2)3N(CH2X)]2[MnCl4], where X is Cl or Br. From the structural point of view, these compounds consist of two isolated ionic species with an antifluorite crystal arrangement: 0D tetrahedral [MnCl4]2− anions and large, quasi-spherical and polar [(CH3CH2)3N(CH2X)]+ cations. These cations are responsible for the first-order phase transition observed at Tt ∼ 318 K for the Cl-compound and Tt ∼ 343 K for the Br-compound. We investigated various functional properties—specifically dielectric, photoluminescent, and pressure responses—and our results demonstrate that these compounds are highly versatile, exhibiting broad responses to external stimuli. Furthermore, we found that substituting the halogen in the ammonium cations from Cl to Br induces important modifications in their functional properties. In particular, this halogen exchange increases the phase transition temperature, reduces the thermal hysteresis, improves the photoluminescence quantum yield, and enhances the reversible entropy changes under compression–decompression cycles., The authors thank financial support from grant PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR, and the projects ED431C 2022/39 and ED431F 2023/33 funded by Xunta de Galicia. This publication is part of the grant RYC2021-033040-I, funded by MCIN/AEI/10.13039/501100011033 and from European Union “NextGenerationEU”/PRTR”, and granted to J. M. B.-G. This researcher is also grateful for the support received by UDC-Inditex InTalent Programme. J. G.-B. and M. G. acknowledge Xunta de Galicia for Postdoctoral (ED481B-2024) and Predoctoral (ED481A-2023) Fellowships, respectively. P. D.-R. thanks Ministerio de Ciencia, Innovación y Universidades for a FPU Fellowship (FPU23/00091). A. G.-F. and U. B. C. thank the Swedish Research Council (Grant No. VR 2022-03168) and the Göran Gustafsson foundation for funding. This work was partially supported by the Wallenberg Initiative Materials Science for Sustainability (WISE) funded by the Knut and Alice Wallenberg Foundation. A. G.-F acknowledges support from a Beatriz Galindo junior fellowship (BG23/00033) from the Spanish Ministry of Science and Innovation. The authors thank ESRF for the award of beam time (A01-2-1291 on BM01). Open access publication fees were covered by Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2022/39, Xunta de Galicia; ED431F 2023/33, Xunta de Galicia; ED481B-2024, Xunta de Galicia; ED481A-2023, Suecia. Vetenskapsrådet; VR 2022-03168
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Structural, Thermal and Functional Properties of a Hybrid Dicyanamide-Perovskite Solid Solution

  • García Ben, Javier
  • Salgado-Beceiro, Jorge
  • Delgado Ferreiro, Ignacio
  • Dafonte Rodríguez, Pedro
  • López-Beceiro, Jorge
  • Artiaga, Ramón
  • Castro-García, Socorro
  • Sánchez-Andújar, Manuel
  • Bermúdez-García, Juan Manuel
  • Señarís-Rodríguez, M. A.
[Abstract]: In Solid-State Chemistry, a well-known route to obtain new compounds and modulate their properties is the formation of solid solutions, a strategy widely exploited in the case of classical inorganic perovskites but relatively unexplored among emergent hybrid organic–inorganic perovskites (HOIPs). In this work, to the best of our knowledge, we present the first dicyanamide-perovskite solid solution of [TPrA][Co0.5Ni0.5(dca)3] and study its thermal, dielectric and optical properties, comparing them with those of the parent undoped compounds [TPrA][Co(dca)3] and [TPrA][Ni(dca)3]. In addition, we show that the prepared doped compound can be used as a precursor that, by calcination, allows CNTs with embedded magnetic Ni:Co alloy nanoparticles to be obtained through a fast and much simpler synthetic route than other complex CVD or arc-discharge methods used to obtain this type of material., M.A.S.-R. sincerely thanks Emilio Morán Miguélez for all of his teaching, advice, support, friendship and vital optimism during her Ph.D period in Madrid, as well as throughout the years. We will always remember him with gratitude and with a big smile. From the financial point of view, the authors are thankful for financial support from Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00) and Xunta de Galicia for the collaboration agreement “Development of research strategic actions UDC I + D + i 2021–2022: CICA-Disrupting Projects 2021SEM-A3 (NanoCool)”. J.G.-B. and J.M.B.-G. acknowledge Xunta de Galicia for Predoctoral and Postdoctoral Fellowships, respectively. I.D.-F thanks Ministerio de Universidades for an FPU Predoctoral Fellowship. The authors also thank Universidade da Coruña/CISUG for funding for the open access of this manuscript.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Atypical Magnetic Behavior in the Incommensurate (CH3NH3)[Ni(HCOO)3] Hybrid Perovskite

  • Breogán Pato, Doldán
  • Cañadillas-Delgado, Laura
  • Gómez Aguirre, Lilián Claudia
  • Señarís-Rodríguez, M. A.
  • Sánchez-Andújar, Manuel
  • Fabelo, Óscar
  • Mira Pérez, Jorge
[Abstract] A plethora of temperature-induced phase transitions have been observed in (CH3NH3)[M(HCOO)3] compounds, where M is Co(II) or Ni(II). Among them, the nickel compound exhibits a combination of magnetic and nuclear incommensurability below Néel temperature. Despite the fact that the zero-field behavior has been previously addressed, here we study in depth the macroscopic magnetic behavior of this compound to unveil the origin of the atypical magnetic response found in it and in its parent family of formate perovskites. In particular, they show a puzzling magnetization reversal in the curves measured starting from low temperatures, after cooling under zero field. The first atypical phenomenon is the impossibility of reaching zero magnetization, even by nullifying the applied external field and even compensating it for the influence of the Earth’s magnetic field. Relatively large magnetic fields are needed to switch the magnetization from negative to positive values or vice versa, which is compatible with a soft ferromagnetic system. The atypical path found in its first magnetization curve and hysteresis loop at low temperatures is the most noticeable feature. The magnetization curve switches from more than 1200 Oe from the first magnetization loop to the subsequent magnetization loops. A feature that cannot be explained using a model based on unbalanced pair of domains. As a result, we decipher this behavior in light of the incommensurate structure of this material. We propose, in particular, that the applied magnetic field induces a magnetic phase transition from a magnetically incommensurate structure to a magnetically modulated collinear structure., The authors thank financial support from the Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC 2021-121076-I00). The authors are grateful to Dra. Ana Arauzo at Servicio de Medidas Físicas of the Universidad de Zaragoza for heat capacity data. O.F. acknowledges the Spanish Ministry of Universities (UNI/551/2021) and the European Union through the Funds Next Generation
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Enhancing and optimization in exisiting HVAC equipment using tools of industry 4.0

  • Fraguela, Feliciano
  • Barreiro Montes, Julio
  • Zaragoza, Sonia
  • Díaz Villamor, Javier
© 2025. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/. This version of the article: Fraguela Díaz, F., Barreiro Montes, J., Díaz Villamor, J., & Zaragoza Fernández, S. (2025). Enhancing and optimization in exisiting HVAC equipment using tools of industry 4.0. Journal of Building Engineering, 102, 111924. . The Version of Record is available online at https://doi.org/10.1016/j.jobe.2025.111924, [Abstract] New artificial intelligence tools, together with those of machine learning specific to the new smart industry, represent both a great opportunity and a great challenge for older technologies not designed with the level of sensorization required by these systems. Most HVAC systems installed in buildings worldwide are still effective, but they are also old and do not have the sensory system designed for the new IoT tools that would optimize their operation. In this study, a procedure is developed based on the combination of magic learning and artificial intelligence tools, through which variables of high variability can be controlled very effectively through the design of their avatar variables in the system. The procedure achieves high precision in the estimation of the water outlet temperature, with the accuracy of values ranging between 88.5 % and 97.2 %. This allows for the creation of variables that contribute to a more precise control of the system. In addition, the methodology significantly reduces false alarms (from 12.7 % to 0.19 % with the new variables), improving the reliability of HVAC systems. These results have been validated in a real installation, confirming their success rate in detecting both operational and maintenance alerts and also validating the implementation of these systems in installations prior to the Industry 4.0 era. This study provides the refrigeration sector with a highly effective and easily implementable procedure that is aligned with circular economy policies, adding new value to old but perfectly valid HVAC equipment, which is the majority of worldwide cases, Acknowledgments The authors are thankful for financial support from the grant PID2021-122532OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe, the project PDC2021-121076-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union Next GenerationEU/PRTR and the project ED431C 2022/39 funded by Xunta de Galicia. This publication is part of the grant RYC2021-033040-I, funded by MCIN/AEI/10.13039/501100011033 and from the European Union « NextGenerationEU»/PRTR, Xunta de Galicia; ED431C 2022/39
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

@thermogramer: Thermal Imaging as a Tool for Science Communication and E-Learning in Social Media

  • Bermúdez-García, Juan Manuel
[Abstract] The COVID-19 pandemic boosted the presence of thermal cameras in our society. These devices are becoming cheaper and smaller and can even be plugged in our smartphones. Therefore, soon enough everybody will have access to these instruments. Thermal cameras have been widely used for industrial, research and/or academic purposes. Now, in the rise of the online era, this work proposes and assesses a new application for such devices as visual engaging tools for science communication and e-learning in social media. Here, we introduce @thermogramer as a science communication channel that shows multispectral (optical and thermal) images of daily life objects to explain the science behind different topics of social interest (climate change, emerging technologies, health, and popular traditions). This young project is already present in social media, press, TV and museum’s exhibitions, and its designed content have been already useful for new inexperienced users, science educators and communicators., This work was funded by Xunta de Galicia and Spanish Ministry of Science (PDC2021-121076-I00)