Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Subsurface chemical nanoidentification by nano-FTIR spectroscopy

  • Mester, Lars
  • Govyadinov, Alexander A.
  • Chen, Shu
  • Goikoetxea, Monika
  • Hillenbrand, Rainer
Nano-FTIR spectroscopy based on Fourier transform infrared near-field spectroscopy allows for label-free chemical nanocharacterization of organic and inorganic composite surfaces. The potential capability for subsurface material analysis, however, is largely unexplored terrain. Here, we demonstrate nano-FTIR spectroscopy of subsurface organic layers, revealing that nano-FTIR spectra from thin surface layers differ from that of subsurface layers of the same organic material. Further, we study the correlation of various nano-FTIR peak characteristics and establish a simple and robust method for distinguishing surface from subsurface layers without the need of theoretical modeling or simulations (provided that chemically induced spectral modifications are not present). Our experimental findings are confirmed and explained by a semi-analytical model for calculating nano-FTIR spectra of multilayered organic samples. Our results are critically important for the interpretation of nano-FTIR spectra of multilayer samples, particularly to avoid that geometry-induced spectral peak shifts are explained by chemical effects. Nano-FTIR spectroscopy allows chemical characterization of composite surfaces, but its capability in subsurface analysis is not much explored. The authors show that spectra from thin surface layers differ from those of subsurface layers of the same organic material, and establish a method for distinguishing them in experiments., This work has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 721874 (SPM2.0). The authors further acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities (national project RTI2018-094830-B-100 and the project MDM-2016-0618 of the Marie de Maeztu Units of Excellence Program) and the Basque Government (grant No. IT1164-19).
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Cholesterol effect on the specific capacitance of submicrometric DOPC bilayer patches measured by in-liquid scanning dielectric microscopy

  • Muzio, Martina Di
  • Millán Solsona, Rubén
  • Borrell Hernández, Jordi
  • Fumagalli, Laura
  • Gomila Lluch, Gabriel
The specific capacitance of biological membranes is a key physical parameter in bioelectricity that also provides valuable physicochemical information on composition, phase, or hydration properties. Cholesterol is known to modulate the physicochemical properties of biomembranes, but its effect on the specific capacitance has not been fully established yet. Here we use the high spatial resolution capabilities of in-liquid scanning dielectric microscopy in force detection mode to directly demonstrate that DOPC bilayer patches at 50% cholesterol concentration show a strong reduction of their specific capacitance with respect to pure DOPC bilayer patches. The reduction observed (around 35%) cannot be explained by the small increase in bilayer thickness (around 16%). We suggest that the reduction of the specific capacitance might be due to the dehydration of the polar head groups caused by the insertion of cholesterol molecules in the bilayer. The results reported confirm the potential of in-liquid SDM to study the electrical and physicochemical properties of lipid bilayers at very small scales (down to around 200 nm here), with implications in fields such as biophysics, bioelectricity, biochemistry, and biosensing.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Sizing single nanoscale objects from polarization forces

  • Lozano Caballero, Helena
  • Millán Solsona, Rubén
  • Fabregas, Rene
  • Gomila Lluch, Gabriel
Sizing natural or engineered single nanoscale objects is fundamental in many areas of science and technology. To achieve it several advanced microscopic techniques have been developed, mostly based on electron and scanning probe microscopies. Still for soft and poorly adhered samples the existing techniques face important challenges. Here, we propose an alternative method to size single nanoscale objects based on the measurement of its electric polarization. The method is based on Electrostatic Force Microscopy measurements combined with a specifically designed multiparameter quantification algorithm, which gives the physical dimensions (height and width) of the nanoscale object. The proposed method is validated with ~50 nm diameter silver nanowires, and successfully applied to ~10 nm diameter bacterial polar flagella, an example of soft and poorly adhered nanoscale object. We show that an accuracy comparable to AFM topographic imaging can be achieved. The main advantage of the proposed method is that, being based on the measurement of long-range polarization forces, it can be applied without contacting the sample, what is key when considering poorly adhered and soft nanoscale objects. Potential applications of the proposed method to a wide range of nanoscale objects relevant in Material, Life Sciences and Nanomedicine is envisaged.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Dielectric properties and lamellarity of single liposomes measured by in-liquid scanning dielectric microscopy

  • Di Muzio, Martina
  • Millán Solsona, Rubén
  • Dols-Pérez, Aurora
  • Borrell Hernández, Jordi
  • Fumagalli, Laura, 1959-
  • Gomila Lluch, Gabriel
Liposomes are widely used as drug delivery carriers and as cell model systems. Here, we measure the dielectric properties of individual liposomes adsorbed on a metal electrode by in-liquid scanning dielectric microscopy in force detection mode. From the measurements the lamellarity of the liposomes, the separation between the lamellae and the specifc capacitance of the lipid bilayer can be obtained. As application we considered the case of non-extruded DOPC liposomes with radii in the range ~100-800 nm. Uni-, bi- and tri-lamellar liposomes have been identifed, with the largest population corresponding to bi-lamellar liposomes. The interlamellar separation in the bi-lamellar liposomes is found to be below ~10 nm in most instances. The specifc capacitance of the DOPC lipid bilayer is found to be ~0.75 µF/cm2 in excellent agreement with the value determined on solid supported planar lipid bilayers. The lamellarity of the DOPC liposomes shows the usual correlation with the liposome's size. No correlation is found, instead, with the shape of the adsorbed liposomes. The proposed approach ofers a powerful label-free and non invasive method to determine the lamellarity and dielectric properties of single liposome
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Efficient long-range conduction in cable bacteria through nickel protein wires

  • Boschker, Henricus T. S.
  • Cook, Perran L. M.
  • Polerecky, Lubos
  • Eachambadi, Raghavendran Thiruvallur
  • Lozano, Helena
  • Hidalgo Martinez, Silvia
  • Khalenkow, Dmitry
  • Spampinato, Valentina
  • Claes, Nathalie
  • Kundu, Paromita
  • Wang, Da
  • Bals, Sara
  • Sand, Karina K.
  • Cavezza, Francesca
  • Hauffman, Tom
  • Bjerg, Jesper Tataru
  • Skirtach, Andre G.
  • Kochan, Kamila
  • McKee, Merrilyn
  • Wood, Bayden
  • Bedolla, Diana
  • Gianoncelli, Alessandra
  • Geerlings, Nicole M. J.
  • Van Gerven, Nani
  • Remaut, Han
  • Geelhoed, Jeanine S.
  • Millán Solsona, Rubén
  • Fumagalli, Laura
  • Nielsen, Lars Peter
  • Franquet, Alexis
  • Manca, Jean V.
  • Gomila Lluch, Gabriel
  • Meysman, Filip J. R.
Filamentous cable bacteria display long-range electron transport, generating electrical currents over centimeter distances through a highly ordered network of fibers embedded in their cell envelope. The conductivity of these periplasmic wires is exceptionally high for a biological material, but their chemical structure and underlying electron transport mechanism remain unresolved. Here, we combine high-resolution microscopy, spectroscopy, and chemical imaging on individual cable bacterium filaments to demonstrate that the periplasmic wires consist of a conductive protein core surrounded by an insulating protein shell layer. The core proteins contain a sulfur-ligated nickel cofactor, and conductivity decreases when nickel is oxidized or selectively removed. The involvement of nickel as the active metal in biological conduction is remarkable, and suggests a hitherto unknown form of electron transport that enables efficient conduction in centimeter-long protein structures.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Electrical properties of outer membrane extensions from Shewanella oneidensis MR-1

  • Lozano, Helena
  • Millán Solsona, Rubén
  • Blanco-Cabra, Núria
  • Fabregas, Rene
  • Torrents Serra, Eduard
  • Gomila Lluch, Gabriel
Shewanella oneidensis MR-1 is a metal-reducing bacterium that is able to exchange electrons with solid-phase minerals outside the cell. These bacterial cells can produce outer membrane extensions (OMEs) that are tens of nanometers wide and several microns long. The capability of these OMEs to transport electrons is currently under investigation. Tubular chemically fixed OMEs from S. oneidensis have shown good dc conducting properties when measured in an air environment. However, no direct demonstration of the conductivity of the more common bubble-like OMEs has been provided yet, due to the inherent difficulties in measuring it. In the present work, we measured the electrical properties of bubble-like OMEs in a dry air environment by Scanning Dielectric Microscopy (SDM) in force detection mode. We found that at the frequency of the measurements (∼2 kHz), OMEs show an insulating behavior, with an equivalent homogeneous dielectric constant εOME = 3.7 ± 0.7 and no dephasing between the applied ac voltage and the measured ac electric force. The dielectric constant measured for the OMEs is comparable to that obtained for insulating supramolecular protein structures (εprotein = 3–4), pointing towards a rich protein composition of the OMEs, probably coming from the periplasm. Based on the detection sensitivity of the measuring instrument, the upper limit for the ac longitudinal conductivity of bubble-like OMEs in a dry air environment has been set to σOME,ac < 10−5 S m−1, a value several orders of magnitude smaller than the dc conductivity measured in tubular chemically fixed OMEs. The lack of conductivity of bubble-like OMEs can be attributed to the relatively large separation between cytochromes in these larger OMEs and to the suppression of cytochrome mobility due to the dry environmental conditions., This work was partially supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) and EU FEDER through Grant No. PDI2019-110210GB-100 and and RTI2018-098573-B-100, the Generalitat de Catalunya through Grant No. 2017-SGR1079 and the CERCA Program. This work also received funding from the European Commission under Grant Agreement No. H2020-MSCA-721874 (SPM2.0). H.L. acknowledges support from MINECO through and FI grant (SEV 2014-0425-06). R.F. received funding from the Marie Sklodowska-Curie Action grant Nº 842402. We acknowledge Prof. M. El-Naggar for his help in the growth of the OMEs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast and high resolution mapping of elastic properties of biomolecules and polymers with bimodal AFM

  • Benaglia, Simone
  • Gisbert, Victor G.
  • Perrino, Alma P.
  • Amo, Carlos A.
  • García García, Ricardo
[EN] Fast, high resolution and wide elastic modulus range mapping of heterogeneous interfaces represents a major goal of atomic force microscopy (AFM). This goal becomes more challenging when the nanomechanical mapping involves biomolecules in their native environment. Over the years, several AFM-based methods have been developed to address that goal. However, none of those methods combine sub-nanometer spatial resolution, quantitative accuracy, fast data acquisition speed, wide elastic modulus range and operation in physiological solutions. Here we present detailed protocols to generate high resolution maps of the elastic properties of biomolecules and polymers by using bimodal AFM. The method is fast because the elastic modulus, deformation and topography images are obtained simultaneously. The method is efficient because just a single data point per pixel is needed to generate the above images. In addition, by knowing the deformation, bimodal AFM enables to reconstruct the true topography of the surface., European Research Council (ERC–AdG–340177; 3DNanoMech) and grants CSD201000024 and MAT2016-76507-R from the Ministerio de Economía y Competitividad. This work received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement 721874 (SPM2.0). We also acknowledge fellowships FPU15/04622 (C.A.A.) and BES-2017-081907 (V.G.G.) from the Ministerio de Educación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast, quantitative and high resolution mapping of viscoelastic properties with bimodal AFM

  • Benaglia, Simone
  • Amo, Carlos A.
  • García García, Ricardo
Electronic supplementary information (ESI) available. See DOI: 10.1039/c9nr04396a, Quantitative mapping of viscoelastic properties of soft matter with a nanoscale spatial resolution is an active and relevant research topic in atomic force microscopy (AFM) and nanoscale science characterization. The AFM has demonstrated its accuracy to measure the energy dissipated on a sample surface with an atomic-scale resolution. However, the transformation of energy dissipation values associated with viscoelastic interactions to a material property remains very challenging. A key issue is to establish the relationship between the AFM observables and some material properties such as viscosity coefficient or relaxation time. Another relevant issue is to determine the accuracy of the measurements. We demonstrate that bimodal atomic force microscopy enables the accurate measurement of several viscoelastic parameters such as the Young's modulus, viscosity coefficient, retardation time or loss tangent. The parameters mentioned above are measured at the same time that the true topography. We demonstrate that the loss tangent is proportional to the viscosity coefficient. We show that the mapping of viscoelastic properties neither degrades the spatial resolution nor the imaging speed of AFM. The results are presented for homogeneous polymer and block co-polymer samples with Young's modulus, viscosity and retardation times ranging from 100 MPa to 3 GPa, 10 to 400 Pa s and 50 to 400 ns, respectively. Numerical simulations validate the accuracy of bimodal AFM to determine the viscoelastic parameters., European Research Council ERC–AdG–340177 (3DNanoMech) and the Ministerio de Economía y Competitividad for grants CSD2010-00024 and MAT2016-76507-R. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 721874 (SPM2.0). The fellowship FPU15/04622 from the Ministerio de Educación., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Mapping of the Conductivity and Interfacial Capacitance of an Electrolyte‐Gated Organic Field‐Effect Transistor under Operation

  • Kyndiah, Adrica
  • Checa, Martí
  • Leonardi, Francesca
  • Millan Solsona, Ruben
  • Muzio, Martina Di
  • Tanwar, Shubham
  • Fumagalli, Laura
  • Mas Torrent, Marta
  • Gomila, Gabriel
Probing nanoscale electrical properties of organic semiconducting materials at the interface with an electrolyte solution under externally applied voltages is key in the field of organic bioelectronics. It is demonstrated that the conductivity and interfacial capacitance of the active channel of an electrolyte‐gated organic field‐effect transistor (EGOFET) under operation can be probed at the nanoscale using scanning dielectric microscopy in force detection mode in liquid environment. Local electrostatic force versus gate voltage transfer characteristics are obtained on the device and correlated with the global current–voltage transfer characteristics of the EGOFET. Nanoscale maps of the conductivity of the semiconducting channel show the dependence of the channel conductivity on the gate voltage and its variation along the channel due to the space charge limited conduction. The maps reveal very small electrical heterogeneities, which correspond to local interfacial capacitance variations due to an ultrathin non‐uniform insulating layer resulting from a phase separation in the organic semiconducting blend. Present results offer insights into the transduction mechanism at the organic semiconductor/electrolyte interfaces at scales down to ≈100 nm, which can bring substantial optimization of organic electronic devices for bioelectronic applications such as electrical recording on excitable cells or label‐free biosensing., This work was partially supported by the BEST Postdoctoral Programme funded by the European Commission under Horizon 2020's Marie Curie Sklodowska‐Curie Actions COFUND scheme (GA 712754) and the Severo Ochoa programme of the Spanish Ministry of Science and Competitiveness (SEV‐2014‐0425), the BORGES project (Marie Curie Skłodowska European Training Network (MSCA‐ITN‐ETN)) under the Grant Agreement (GA 813863), and the Agencia Estatal de Investigacion (Nanoelectrophys project, TEC2016‐79156‐P). Support from an ICREA Academia award (G.G.), the 2017‐SGR1079 grant, and the CERCA program from the Generalitat de Catalunya is also acknowledged. F.L. and M.M.‐T. were funded by the Spanish Ministry (project FANCY CTQ2016‐80030‐R and GENESIS PID2019‐111682RB‐I00), the Generalitat de Catalunya (2017‐SGR‐918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496). F.L. acknowledges the Juan de la Cierva fellowship. L.F. received funding from the European Research Council (grant agreement No. 819417) under the European Union's Horizon 2020 research and innovation programme. This work also received funding from the European Commission under Grant Agreement No. H2020‐MSCA‐721874 (SPM2.0). The authors would like to thank Prof. T. Cramer for the measurement software of the EGOFETs and for scientific discussion. The acknowledgements were updated to include a grant from the European Commission on January 27, 2021, after initial online publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subnanometer Interfacial Forces in Three-Dimensional Atomic Force Microscopy: Water and Octane near a Mica Surface

  • Hernández-Muñoz, Jose
  • Uhlig, Manuel R.
  • Benaglia, Simone
  • Chacón, Enrique
  • Tarazona, Pedro
  • García García, Ricardo
[EN] Three-dimensional force microscopy generates atomically resolved 3D images of solid-liquid interfaces. Here, we investigated the components of the interfacial force exerted by a tip on a mica-liquid interface by comparing density functional theory and experiments. The study involved two liquids: an aqueous solution of KCl (polar) and n-octane as a nonpolar solvent. The comparison between theory and experiments shows the presence of oscillatory and monotonically decaying terms. The periodicity of the oscillation arises from entropic effects associated with the molecular packing of the liquid, while its amplitude carries information on the solid surface (substrate and tip)-liquid interactions. The exponent of the monotonic term comes from cohesive interactions between the liquid molecules, while its amplitude reflects the interactions with the solid surfaces., This work was funded by the Ministerio de Ciencia e Innovación (Spain) under grants PID2019-106801GB-I00, MAT2016-76507-R, FIS2017-86007-C3, and FPU2015/0248 (P.T.) and through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no.721874 (SPM2.0).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Speed Nanomechanical Mapping of the Early Stages of Collagen Growth by Bimodal Force Microscopy

  • García-Gisbert, Víctor
  • Benaglia, Simone
  • Uhlig, Manuel R.
  • Proksch, Roger
  • García García, Ricardo
[EN] High-speed atomic force microscopy (AFM) enabled the imaging of protein interactions with millisecond time resolutions (10 fps). However, the acquisition of nanomechanical maps of proteins is about 100 times slower. Here, we developed a high-speed bimodal AFM that provided high-spatial resolution maps of the elastic modulus, the loss tangent, and the topography at imaging rates of 5 fps. The microscope was applied to identify the initial stages of the self-assembly of the collagen structures. By following the changes in the physical properties, we identified four stages, nucleation and growth of collagen precursors, formation of tropocollagen molecules, assembly of tropocollagens into microfibrils, and alignment of microfibrils to generate microribbons. Some emerging collagen structures never matured, and after an existence of several seconds, they disappeared into the solution. The elastic modulus of a microfibril (∼4 MPa) implied very small stiffness (∼3 × 10–6 N/m). Those values amplified the amplitude of the collagen thermal fluctuations on the mica plane, which facilitated microribbon build-up., Financial support from the Ministerio de Ciencia e Innovación (PID2019-106801GB-I00; MAT2016-76507-R), Comunidad de Madrid S2018/NMT-4443 (Tec4Bio-CM), and European Commission Marie Sklodowska-Curie grant agreement No.721874 are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-scale characterisation of a ferroelectric polymer reveals the emergence of a morphological phase transition driven by temperature

  • Hafner, Jonas
  • Benaglia, Simone
  • Richheimer, Filipe
  • Teuschel, Marco
  • Maier, Franz J.
  • Werner, Artner
  • Wood, Sebastian
  • Platz, Daniel
  • Schneider, Michael
  • Hradil, Klaudia
  • Castro, Fernando A.
  • García García, Ricardo
  • Schmid, Ulrich
[EN] Ferroelectric materials exhibit a phase transition to a paraelectric state driven by temperature - called the Curie transition. In conventional ferroelectrics, the Curie transition is caused by a change in crystal symmetry, while the material itself remains a continuous three-dimensional solid crystal. However, ferroelectric polymers behave differently. Polymeric materials are typically of semi-crystalline nature, meaning that they are an intermixture of crystalline and amorphous regions. Here, we demonstrate that the semi-crystalline morphology of the ferroelectric copolymer of vinylidene fluoride and trifluoroethylene (P(VDF-TrFE)) strongly affects its Curie transition, as not only a change in crystal symmetry but also in morphology occurs. We demonstrate, by high-resolution nanomechanical measurements, that the semicrystalline microstructure in the paraelectric state is formed by crystalline domains embedded into a softer amorphous phase. Using in situ X-ray diffraction measurements, we show that the local electromechanical response of the crystalline domains is counterbalanced by the amorphous phase, effectively masking its macroscopic effect. Our quantitative multiscale characterisations unite the nano- and macroscopic material properties of the ferroelectric polymer P(VDF-TrFE) through its semi-crystalline nature., European Union’s Horizon 2020 research and Innovation programme under the Marie Skłodowska-Curie grant agreement number 721874 (SPM2.0). RG acknowledges funding from the European Research Council ERC–AdG–340177 (3DNanoMech). This work was supported by the UK government’s Department for Business, Energy and Industrial Strategy. The dynamic mechanical analysis was supported by T. Koch from the Institute of Materials Science and Technology, TU Wien. We gratefully thank A. Muhamedagić for the contribution of artworks to the figures (armindesign.li)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically resolved interfacial water structures on crystalline hydrophilic and hydrophobic surfaces

  • Uhlig, Manuel R.
  • Benaglia, Simone
  • Thakkar, Ravindra
  • Comer, Jeffrey
  • García García, Ricardo
[EN] Hydration layers are formed on hydrophilic crystalline surfaces immersed in water. Their existence has also been predicted for hydrophobic surfaces, yet the experimental evidence is controversial. Using 3D-AFM imaging, we probed the interfacial water structure of hydrophobic and hydrophilic surfaces with atomic-scale spatial resolution. We demonstrate that the atomic-scale structure of interfacial water on crystalline surfaces presents two antagonistic arrangements. On mica, a common hydrophilic crystalline surface, the interface is characterized by the formation of 2 to 3 hydration layers separated by approximately 0.3 nm. On hydrophobic surfaces such as graphite or hexagonal boron nitride (h-BN), the interface is characterized by the formation of 2 to 4 layers separated by about 0.5 nm. The latter interlayer distance indicates that water molecules are expelled from the vicinity of the surface and replaced by hydrocarbon molecules. This creates a new 1.5-2 nm thick interface between the hydrophobic surface and the bulk water. Molecular dynamics simulations reproduced the experimental data and confirmed the above interfacial water structures. This journal is, European Research Council ERC-AdG-340177, the Ministerio de Ciencia, Innovación y Universidades (PID2019- 106801GB-I00; MAT2016-76507-R) and European Commission Marie Sklodowska-Curie grant agreement No. 721874. J.C. acknowledges financial support by the US National Science Foundation under Grant No. CHE-1726332 and DMR-1945589., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Depth mapping of metallic nanowire polymer nanocomposites by scanning dielectric microscopy

  • Balakrishnan, Harishankar
  • Millán-Solsona, Rubén
  • Checa, Martí
  • Fabregas, Rene
  • Fumagalli, Laura
  • Gomila, Gabriel
Polymer nanocomposite materials based on metallic nanowires are widely investigated as transparent and flexible electrodes or as stretchable conductors and dielectrics for biosensing. Here we show that Scanning Dielectric Microscopy (SDM) can map the depth distribution of metallic nanowires within the nanocomposites in a non-destructive way. This is achieved by a quantitative analysis of sub-surface electrostatic force microscopy measurements with finite-element numerical calculations. As an application we determined the three-dimensional spatial distribution of ∼50 nm diameter silver nanowires in ∼100 nm−250 nm thick gelatin films. The characterization is done both under dry ambient conditions, where gelatin shows a relatively low dielectric constant, εr ∼ 5, and under humid ambient conditions, where its dielectric constant increases up to εr ∼ 14. The present results show that SDM can be a valuable non-destructive subsurface characterization technique for nanowire-based nanocomposite materials, which can contribute to the optimization of these materials for applications in fields such as wearable electronics, solar cell technologies or printable electronics., This work was partially supported by the Spanish Ministerio de Economia, Industria y Competitividad and EU FEDER through Grant No. PID2019-111376RA-I00 and the Generalitat de Catalunya through Grant No. 2017-SGR1079, and the CERCA Program. This work also received funding from the European Commission under Grant Agreement No. H2020- MSCA-721874 (SPM2.0). R. F and L. F. received funding from the Marie Sklodowska-Curie Actions (grants 842402, Dielec2DBiomolecules) and the European Research Council (grant agreement no. 819417, Liquid2DM) under the European Union's Horizon 2020 research and innovation program., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sizing single nanoscale objects from polarization forces

  • Lozano Caballero, Helena
  • Millán Solsona, Rubén
  • Fabregas, Rene
  • Gomila Lluch, Gabriel
Sizing natural or engineered single nanoscale objects is fundamental in many areas of science and technology. To achieve it several advanced microscopic techniques have been developed, mostly based on electron and scanning probe microscopies. Still for soft and poorly adhered samples the existing techniques face important challenges. Here, we propose an alternative method to size single nanoscale objects based on the measurement of its electric polarization. The method is based on Electrostatic Force Microscopy measurements combined with a specifically designed multiparameter quantification algorithm, which gives the physical dimensions (height and width) of the nanoscale object. The proposed method is validated with ~50 nm diameter silver nanowires, and successfully applied to ~10 nm diameter bacterial polar flagella, an example of soft and poorly adhered nanoscale object. We show that an accuracy comparable to AFM topographic imaging can be achieved. The main advantage of the proposed method is that, being based on the measurement of long-range polarization forces, it can be applied without contacting the sample, what is key when considering poorly adhered and soft nanoscale objects. Potential applications of the proposed method to a wide range of nanoscale objects relevant in Material, Life Sciences and Nanomedicine is envisaged.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficient long-range conduction in cable bacteria through nickel protein wires

  • Boschker, Henricus T. S.
  • Cook, Perran L. M.
  • Polerecky, Lubos
  • Eachambadi, Raghavendran Thiruvallur
  • Lozano, Helena
  • Hidalgo Martinez, Silvia
  • Khalenkow, Dmitry
  • Spampinato, Valentina
  • Claes, Nathalie
  • Kundu, Paromita
  • Wang, Da
  • Bals, Sara
  • Sand, Karina K.
  • Cavezza, Francesca
  • Hauffman, Tom
  • Bjerg, Jesper Tataru
  • Skirtach, Andre G.
  • Kochan, Kamila
  • McKee, Merrilyn
  • Wood, Bayden
  • Bedolla, Diana
  • Gianoncelli, Alessandra
  • Geerlings, Nicole M. J.
  • Van Gerven, Nani
  • Remaut, Han
  • Geelhoed, Jeanine S.
  • Millán Solsona, Rubén
  • Fumagalli, Laura
  • Nielsen, Lars Peter
  • Franquet, Alexis
  • Manca, Jean V.
  • Gomila Lluch, Gabriel
  • Meysman, Filip J. R.
Filamentous cable bacteria display long-range electron transport, generating electrical currents over centimeter distances through a highly ordered network of fibers embedded in their cell envelope. The conductivity of these periplasmic wires is exceptionally high for a biological material, but their chemical structure and underlying electron transport mechanism remain unresolved. Here, we combine high-resolution microscopy, spectroscopy, and chemical imaging on individual cable bacterium filaments to demonstrate that the periplasmic wires consist of a conductive protein core surrounded by an insulating protein shell layer. The core proteins contain a sulfur-ligated nickel cofactor, and conductivity decreases when nickel is oxidized or selectively removed. The involvement of nickel as the active metal in biological conduction is remarkable, and suggests a hitherto unknown form of electron transport that enables efficient conduction in centimeter-long protein structures.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cholesterol effect on the specific capacitance of submicrometric DOPC bilayer patches measured by in-liquid scanning dielectric microscopy

  • Muzio, Martina Di
  • Millán Solsona, Rubén
  • Borrell Hernández, Jordi
  • Fumagalli, Laura
  • Gomila Lluch, Gabriel
The specific capacitance of biological membranes is a key physical parameter in bioelectricity that also provides valuable physicochemical information on composition, phase, or hydration properties. Cholesterol is known to modulate the physicochemical properties of biomembranes, but its effect on the specific capacitance has not been fully established yet. Here we use the high spatial resolution capabilities of in-liquid scanning dielectric microscopy in force detection mode to directly demonstrate that DOPC bilayer patches at 50% cholesterol concentration show a strong reduction of their specific capacitance with respect to pure DOPC bilayer patches. The reduction observed (around 35%) cannot be explained by the small increase in bilayer thickness (around 16%). We suggest that the reduction of the specific capacitance might be due to the dehydration of the polar head groups caused by the insertion of cholesterol molecules in the bilayer. The results reported confirm the potential of in-liquid SDM to study the electrical and physicochemical properties of lipid bilayers at very small scales (down to around 200 nm here), with implications in fields such as biophysics, bioelectricity, biochemistry, and biosensing.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrical properties of outer membrane extensions from Shewanella oneidensis MR-1

  • Lozano, Helena
  • Millán Solsona, Rubén
  • Blanco-Cabra, Núria
  • Fabregas, Rene
  • Torrents Serra, Eduard
  • Gomila Lluch, Gabriel
Shewanella oneidensis MR-1 is a metal-reducing bacterium that is able to exchange electrons with solid-phase minerals outside the cell. These bacterial cells can produce outer membrane extensions (OMEs) that are tens of nanometers wide and several microns long. The capability of these OMEs to transport electrons is currently under investigation. Tubular chemically fixed OMEs from S. oneidensis have shown good dc conducting properties when measured in an air environment. However, no direct demonstration of the conductivity of the more common bubble-like OMEs has been provided yet, due to the inherent difficulties in measuring it. In the present work, we measured the electrical properties of bubble-like OMEs in a dry air environment by Scanning Dielectric Microscopy (SDM) in force detection mode. We found that at the frequency of the measurements (∼2 kHz), OMEs show an insulating behavior, with an equivalent homogeneous dielectric constant εOME = 3.7 ± 0.7 and no dephasing between the applied ac voltage and the measured ac electric force. The dielectric constant measured for the OMEs is comparable to that obtained for insulating supramolecular protein structures (εprotein = 3–4), pointing towards a rich protein composition of the OMEs, probably coming from the periplasm. Based on the detection sensitivity of the measuring instrument, the upper limit for the ac longitudinal conductivity of bubble-like OMEs in a dry air environment has been set to σOME,ac < 10−5 S m−1, a value several orders of magnitude smaller than the dc conductivity measured in tubular chemically fixed OMEs. The lack of conductivity of bubble-like OMEs can be attributed to the relatively large separation between cytochromes in these larger OMEs and to the suppression of cytochrome mobility due to the dry environmental conditions., This work was partially supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) and EU FEDER through Grant No. PDI2019-110210GB-100 and and RTI2018-098573-B-100, the Generalitat de Catalunya through Grant No. 2017-SGR1079 and the CERCA Program. This work also received funding from the European Commission under Grant Agreement No. H2020-MSCA-721874 (SPM2.0). H.L. acknowledges support from MINECO through and FI grant (SEV 2014-0425-06). R.F. received funding from the Marie Sklodowska-Curie Action grant Nº 842402. We acknowledge Prof. M. El-Naggar for his help in the growth of the OMEs.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dielectric properties and lamellarity of single liposomes measured by in-liquid scanning dielectric microscopy

  • Di Muzio, Martina
  • Millán Solsona, Rubén
  • Dols-Pérez, Aurora
  • Borrell Hernández, Jordi
  • Fumagalli, Laura, 1959-
  • Gomila Lluch, Gabriel
Liposomes are widely used as drug delivery carriers and as cell model systems. Here, we measure the dielectric properties of individual liposomes adsorbed on a metal electrode by in-liquid scanning dielectric microscopy in force detection mode. From the measurements the lamellarity of the liposomes, the separation between the lamellae and the specifc capacitance of the lipid bilayer can be obtained. As application we considered the case of non-extruded DOPC liposomes with radii in the range ~100-800 nm. Uni-, bi- and tri-lamellar liposomes have been identifed, with the largest population corresponding to bi-lamellar liposomes. The interlamellar separation in the bi-lamellar liposomes is found to be below ~10 nm in most instances. The specifc capacitance of the DOPC lipid bilayer is found to be ~0.75 µF/cm2 in excellent agreement with the value determined on solid supported planar lipid bilayers. The lamellarity of the DOPC liposomes shows the usual correlation with the liposome's size. No correlation is found, instead, with the shape of the adsorbed liposomes. The proposed approach ofers a powerful label-free and non invasive method to determine the lamellarity and dielectric properties of single liposome