Pasar al contenido principal

CORRELACION DE LAS PROPIEDADES ELECTRONICAS Y OPTICAS EN NANOHILOS FUNCIONALES A TRAVES DE NANOSCOPIA ELECTRONICA AVANZADA

MAT2010-15138

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twinning-, polytypism-, and polarity-induced morphological modulation in nonplanar nanostructures with van der Waals Epitaxy

  • Utama, Muhammad Iqbal Bakti
  • Mata, María de la
  • Magen, Cesar
  • Arbiol, Jordi
  • Xiong, Qihua
Twinning, polytypism, and polarity are important aspects in nanostructural growth since their presence can affect various properties of the as-grown products. The morphology of nanostructures grown via van der Waals epitaxy is shown to be strongly influenced by the twinning density and the presence of polytypism within the nanostructures, while the growth direction is driven by the compound polarity. With ZnTe as the model material, vertically aligned nanorods are successfully produced with variable cross-section and branched crystals (tripods and tetrapods) on only a single type of substrate. Van der Waals epitaxy contributes by relaxing the lattice-mismatch requirements for epitaxial growth and by enabling a variety of crystal planes in the initial stages of the growth to be interfaced to the substrate, regardless of the polarity of the epitaxial material. These results may provide more flexibility in tuning rationally the morphology of epitaxial nanostructures into other shapes with higher complexity by routine adjustment of growth environment. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., M.I.B.U. and M.d.l.M. contributed equally to this work. Q.X. acknowledges the strong support from the Singapore National Research Foundation through a fellowship grant (NRF-RF2009-06), and from Nanyang Technological University through a generous start-up grant (M58110061) and the New Initiative Fund (M58110100). J.A. acknowledges funding from the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE) and Generalitat de Catalunya (2009 SGR 770 and NanoAraCat). The authors thank the staff at the TEM facilities at INA-LMA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarity assignment in ZnTe, GaAs, ZnO, and GaN-AlN nanowires from direct dumbbell analysis

  • Mata, María de la
  • Magen, Cesar
  • Gazquez, Jaume
  • Utama, Muhammad Iqbal Bakti
  • Heiss, Martin
  • Lopatin, Sergei
  • Furtmayr, Florian
  • Fernández-Rojas, Carlos J
  • Peng, Bo
  • Morante, Joan Ramon
  • Rurali, Riccardo
  • Eickhoff, Martin
  • Fontcuberta i Morral, Anna
  • Xiong, Qihua
  • Arbiol, Jordi
Aberration corrected scanning transmission electron microscopy (STEM) with high angle annular dark field (HAADF) imaging and the newly developed annular bright field (ABF) imaging are used to define a new guideline for the polarity determination of semiconductor nanowires (NWs) from binary compounds in two extreme cases: (i) when the dumbbell is formed with atoms of similar mass (GaAs) and (ii) in the case where one of the atoms is extremely light (N or O: ZnO and GaN/AlN). The theoretical fundaments of these procedures allow us to overcome the main challenge in the identification of dumbbell polarity. It resides in the separation and identification of the constituent atoms in the dumbbells. The proposed experimental via opens new routes for the fine characterization of nanostructures, e.g., in electronic and optoelectronic fields, where the polarity is crucial for the understanding of their physical properties (optical and electronic) as well as their growth mechanisms., This work was partially supported by the Spanish Project Consolider Ingenio CSD2009 00013 IMAGINE and CSD2009 00050 MULTICAT. J.A. acknowledges the funding from the Spanish MICINN Projects MAT2010-15138 and MAT2010-21510 and Generalitat de Catalunya (2009 SGR 770, NanoAraCat and XaRMAE). M.H. and A.F.i.M. thank funding through the ERC starting Grant “Upcon”, the SNF through Project No. 129775/1, and the NCCR “Quantum Science and Technology”. Q.X. acknowledges the funding support of this work from Singapore National Research Foundation through NRF fellowship grant (NRF-RF2009-06) and additional start-up grant support (M58113004) from Nanyang Technological University. R.R. acknowledges funding under Contract Nos. 200950I164, TEC2009-06986, FIS2009-12721-C04-03, and CSD2007-00041. M.E. and F.F. thank funding from the EU via the Project DOTSENSE (FP7, Grant No. 224212)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The growth of ultralong ZnTe micro/nanostructures: The influence of polarity and twin direction on the morphogenesis of nanobelts and nanosheets

  • Utama, Muhammad Iqbal Bakti
  • Mata, María de la
  • Zhang, Qing
  • Magén, César
  • Arbiol, Jordi
  • Xiong, Qihua
Although ZnTe nanobelts present an intriguing platform to study various optical properties and phenomena in semiconductors, there was very limited study regarding the crystalline structure and defects of ZnTe nanobelts. Here, we correlate the structural properties and features in the crystal of ZnTe nanobelts with the resulting as-synthesized morphology. Ultralong ZnTe nanobelts were synthesized to reach the subcentimeter length scale. Two types of nanobelts were identified according to whether tapering was present and discerned on the basis of crystallinity and polarity of the structure. We conclude that tapered sheetlike nanobelts have Te-terminated lateral facets that induced lateral growth, whereas untapered nanobelts have facets that are nonpolar and nonreactive. Axial and transversal twins were also observed, where the polarity was conserved across twinning boundaries. © 2013 American Chemical Society., Q.X. acknowledges the strong support from Singapore National Research Foundation via a fellowship grant (NRF-RF2009-06) and Ministry of Education via two Tier2 grants (MOE2011-T2-2-051 and MOE2012-T2-2-086). This research is also supported, in part, by the start-up grant (M58110061) and the New Initiative Fund (M58110100) from Nanyang Technological University. J.A. acknowledges the funding from the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE) and Generalitat de Catalunya (2009 SGR 770 and NanoAraCat). M.d.l.M. thanks CSIC JAE Pre-Doc program. The authors thank the TEM facilities at the Universitat de Barcelona and INA-LMA at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A review of MBE grown 0D, 1D and 2D quantum structures in a nanowire

  • Mata, María de la
  • Zhou, Xiang
  • Furtmayr, Florian
  • Teubert, Jörg
  • Gradečak, Silvija
  • Eickhoff, Martin
  • Fontcuberta Morral, Anna
  • Arbiol, Jordi
We review different strategies to achieve a three-dimensional energy bandgap modulation in a nanowire (NW) by the introduction of self-assembled 0D, 1D and 2D quantum structures, quantum dots (QDs), quantum wires (QWRs) and quantum wells (QWs). Starting with the well-known axial, radial (coaxial/prismatic) or polytypic quantum wells in GaN/AlN, GaAs/AlAs or wurtzite/zinc-blende systems, respectively, we move to more sophisticated structures by lowering their dimensionality. New recent approaches developed for the self-assembly of GaN quantum wires and InAs or AlGaAs quantum dots on single nanowire templates are reported and discussed. Aberration corrected scanning transmission electron microcopy is presented as a powerful tool to determine the structure and morphology at the atomic scale allowing for the creation of 3D atomic models that can help us to understand the enhanced optical properties of these advanced quantum structures. © 2013 The Royal Society of Chemistry., This work was supported by the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE), and Generalitat de Catalunya projects NanoAraCat, 2009-SGR-770 and XaRMAE. XZ and SG acknowledge support by the Center for Excitonics, an Energy Frontier Research Center funded by the US Department of Energy, Office of Basic Energy Sciences under Award number DE-SC0001088. MdlM thanks the CSIC JAE Pre-Doc program. AFiM acknowledges funding from SNF through NCCR-QSIT and grant no. 134506., Peer reviewed