Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of the wavelength dependence in laser ablation of advanced ceramics and glass-ceramic materials in the nanosecond range

  • Sola, D.
  • Peña, J. I.
This is an open access article distributed under the Creative Commons Attribution License., In this work, geometrical dimensions and ablation yields as a function of the machining method and reference position were studied when advanced ceramics and glass-ceramic materials were machined with pulsed lasers in the nanosecond range. Two laser systems, emitting at 1064 and 532 nm, were used. It was shown that the features obtained depend on whether the substrate is processed by means of pulse bursts or by grooves. In particular, when the samples were processed by grooves, machined depth, removed volume and ablation yields reached their maximum, placing the sample out of focus. It was shown that these characteristics do not depend on the processing conditions, the wavelength or the optical configuration, and that this is intrinsic behavior of the processing method. Furthermore, the existence of a close relation between material hardness and ablation yields was demonstrated. © 2013 by the authors; licensee MDPI, Basel, Switzerland., Authors thank the Bosh and Siemens Home Appliances Group and 7th Framework Programme EU No. 314630-UV Marking for the financial support of this work., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioeutectic® ceramics for biomedical application obtained by laser floating zone method. In vivo evaluation

  • Aza, Piedad N. de
  • Peña, J. I.
  • Luklinska, Zofia B.
  • Meseguer-Olmo, Luis
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license., In this study, the Bioeutectic® blocks were inserted into the critical size defects of eight rabbits, using both tibiae, and the physical and chemical nature of the remodeled interface between the Bioeutectic® implants and the surrounding bone were performed at four and 15 months. The results showed a new fully mineralized bone growing in direct contact with the implants. The ionic exchange, taking place at the implant interface with the body fluids was essential in the process of the implant integration through a dissolution-precipitation-transformation mechanism. The study found the interface biologically and chemically active over the 15 months implantation period. The osteoblastic cells migrated towards the interface and colonized the surface at the contact areas with the bone. The new developed apatite structure of porous morphology mimics natural bone. © 2014 by the authors., The authors wish to acknowledge funding from the European Community at the 7th Framework Program EU No. 314630-UV Marking and Generalitat Valenciana (GVA) within the Project ACOMP/2009/173., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure of planar glass substrates modified by Laser Ablation Backwriting (LAB) of metal targets

  • Rey-García, F.
  • Flores Arias, M. Teresa
  • Gómez-Reino, Carlos
  • Lahoz, Ruth
  • Fuente, Germán F. de la
  • Assenmacher, W.
  • Mader, W.
Geometrically controlled, channel-like structures were prepared on commercial, soda-lime glass substrates, by a Laser Ablation Backwriting (LAB) process using a commercial Nd:YVO4 laser fitted with a beam steering galvanometer mirror unit. 70Cu30Zn Brass alloy, Ag and Al metal targets were evaporated onto glass substrates by simple irradiation through the same glass substrates. The resultant structures were characterized by SEM, TEM, and UV-vis-nIR spectroscopy. These revealed the presence of metal nanostructures in the case of brass and Ag targets, with their typical local surface plasmon resonance (LSPR) bands. In contrast, Al was not found in its elemental form, but rather integrated into the glass substrate. These results were confirmed by energy dispersive X-ray microanalysis (EDS) studies, performed with TEM and SEM observation on representative, polished cross section samples. Preliminary light guiding studies demonstrated the potential to develop burried waveguides just below the surface of the glass substrates in all cases, suggesting that LAB may be a convenient method to prepare stable waveguides by modifying inexpensive, commercial window glass. © 2014 Elsevier B.V. All rights reserved., Work supported with partial funding from MICINN (SURFALUXSOL-00030930 and MAT2010-18519), Gobierno de Aragón/FondoSocial Europeo (Group T87, Laser Aplications Lab), EU FP7 314630and XUNTA DE GALICIA/FEDER (INCITE08PXIB206013PR)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous-mode laser ablation at the solid-liquid interface of pelletized low-cost materials for the production of luminescent silicon carbide nanocrystals

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Arenal, Raúl
  • Lahoz, Ruth
  • Fuente, Germán F. de la
  • Santamaría, Jesús
We report on the fabrication of silicon carbide (SiC) nanocrystals using a continuous scanning mode laser for the ablation of pelletized SiC microparticles. As a major advantage, we propose the in situ generation and collection of freestanding nanoparticles in an ethanol liquid medium and the use of cost-effective SiC targets in comparison with those commercially available or synthesized after multiple steps. The SiC NPs exhibit luminescent properties under UV exposure and excellent colloidal stability for extended periods of time. The influence of a more oxidizing solvent such as water is also evaluated as the collecting medium., The research leading to these results has received funding from the People Program (under Marie Curie Grant 294094-NANOLIGHT). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Comission under Graphene Flagship (contract no. CNECT-ICT-604391) and under Grant 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3). Additional funding from 314630 - UV Marking (FoF) and DGA (Laser Applications Lab, T87) is also gratefully acknowledged. J.L.H. is thankful for a Juan de la Cierva Postdoctoral Fellowship from the Spanish Ministry of Science and Education., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Marcado láser de polímeros blancos

  • Lavieja, Cristian
  • Clemente, María J.
  • Peña, J. I.
  • Escartín, A.
  • Oriol, Luis
Resumen del póster presentado a la 6ª Jornada de Jóvenes Investigadores en Física y Química de Aragón celebrada en Zaragoza el 20 de noviembre de 2014., Este proyecto has sido financiado por el 7 programa Marco de la unión europea dentro del proyecto UV-MARKING (http://www.uv-marking.eu/)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafast direct laser writing of buried waveguides in the 0.8CaSiO3-0.2Ca3(PO4)2 eutectic glass doped with Nd3+ ions

  • Martínez de Mendívil, J.
  • Sola, D.
  • Vázquez de Aldana, Javier R.
  • Lifante, G.
  • Aza, Piedad N. de
  • Pena, Pilar
  • Peña, J. I.
The Creative Commons Attribution 3.0 Unported License to their work., Trabajo presentado al: "European Materials Research Society Spring Meeting", celebrado en Lille (Francia) del 26 al 30 de mayo de 2014., We report on tubular cladding optical waveguides fabricated in Neodymium doped Wollastonite-Tricalcium Phosphate glass in the eutectic composition. The glass samples were prepared by melting the eutectic powder mixture in a Pt-Rh crucible at 1600 °C and pouring it in a preheated brass mould. Afterwards, the glass was annealed to relieve the inner stresses. Cladding waveguides were fabricated by focusing beneath the sample surface using a pulsed Ti:sapphire laser with a pulsewidth of 120 fs working at 1 kHz. The optical properties of these waveguides have been assessed in terms of near-field intensity distribution and transmitted power, and these results have been compared to previously reported waveguides with double-line configuration. Optical properties have also been studied as function of the temperature. Heat treatments up to 700 °C were carried out to diminish colour centre losses where waveguide's modes and transmitted power were compared in order to establish the annealing temperature at which the optimal optical properties were reached. Laser experiments are in progress to evaluate the ability of the waveguides for 1064 nm laser light generation under 800 nm optical pumping., This work has been partially supported by the projects MAT2013-48426-C2-1-R, DISFOTINT (MECC, TEC2010-21574-C02-01/02) and MICROSERES (Comunidad de Madrid, P2009/TIC-1476). Dr. Daniel Sola thanks the Bosch and Siemens Home Appliances Group, the 7th Framework Programme EU No 314630-UV Marking and MAT2013-41045-R for the financial support of his contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Directional solidification, thermo-mechanical and optical properties of (MgxCa1-x)3Al2Si3O12 glasses doped with Nd3+ ions

  • Sola, D.
  • Conejos, D.
  • Martínez de Mendívil, J.
  • Ortega-San-Martín, L.
  • Lifante, G.
  • Peña, J. I.
In this work glass rods of (MgxCa1-x)3Al2Si3O12 (x = 0, 0-5 and 1) doped with 1 wt% Nd2O3 were produced by the laser floating zone technique. Thermo-mechanical and spectroscopic properties have been evaluated. The three glass samples present good thermo-mechanical properties, with similar hardness, toughness and glass transition temperatures. The spectroscopic characterization shows spectral shifts in absorption and emission spectra. These spectral shifts together with Judd-Ofelt intensity parameters and ionic packing ratio have been used to investigate the local structure surrounding the Nd3+ ions and the covalency of the Nd-O bond. All obtained results agree and confirm the higher covalency of the Nd-O bond in the Ca3Al2Si3O12 glass., Daniel Sola thanks the Bosch and Siemens Home Appliances Group and the 7th Framework Programme EU No 314630-UV Marking for the financial support of his contract. Departamento de Ciencias (PUCP) is acknowledged for allowing the short stay of Luis Ortega-San-Martin at the University of Zaragoza., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid-assisted laser ablation of advanced ceramics and glass-ceramic materials

  • Garcia-Giron, A.
  • Sola, D.
  • Peña, J. I.
In this work, results obtained by laser ablation of advanced ceramics and glass-ceramic materials assisted by liquids are reported. A Q-switched Nd:YAG laser at its fundamental wavelength of 1064 nm with pulse-width in the nanosecond range was used to machine the materials, which were immersed in water and ethylene glycol. Variation in geometrical parameters, morphology, and ablation yields were studied by using the same laser working conditions. It was observed that machined depth and removed volume depended on the thermal, optical, and mechanical features of the processed materials as well as on the properties of the surrounding medium in which the laser processing was carried out. Variation in ablation yields was studied in function of the liquid used to assist the laser process and related to refractive index and viscosity. Material features and working conditions were also related to the obtained results in order to correlate ablation parameters with respect to the hardness of the processed materials., Antonio Garcia-Giron and Daniel Sola thank the Bosch and Siemens Home Appliances Group and the 7th Framework Programme EU No 314630-UV Marking for the financial support of their contract., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UV-laser marking of a TiO2-containing ABS material

  • Clemente, María J.
  • Lavieja, Cristian
  • Peña, J. I.
  • Oriol, Luis
Marking of titanium dioxide‐containing ABS polymeric samples was accomplished using a UV laser that induces a white to grey color change with only a minor alteration of the plastic material. The characterization of this marking process has been conducted by different techniques to determine the quality of the UV‐laser marking and to gain an insight into how the plastic material is affected by laser irradiation. Surface characterization was performed and tests were conducted to evaluate the potential applications of this UV‐marking process., Seventh Framework Programme of the European Union under the UV-MARKING project; contract grant number: 314630., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the wavelength on laser marking on ABS filled with carbon black

  • Lavieja, Cristian
  • Clemente, María J.
  • Oriol, Luis
  • Peña, J. I.
The laser marking of acrylonitrile–butadiene–styrene filled with carbon black was studied using either an infrared or ultraviolet laser. The influence of the amount of additive on the final contrast of marks was studied for the two differentiated wavelengths. Both lasers exhibit different marking mechanisms, according to color properties, topography, and spectroscopic analysis of the marks. The infrared laser induced a thermally foaming effect and the ultraviolet laser seemed to induce a photochemical effect with the polymer matrix and removal of carbon black. The highest contrast was achieved with the infrared laser and contents of 0.1% carbon black., Financial support from EU project 7FP UV-Marking is gratefully acknowledged (http://www.uv-marking.eu/), grant agreement No 314630., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Directional solidification, thermo-mechanical and optical properties of (MgxCa1-x)3Al2Si3O12 glasses doped with Nd3+ ions

  • Sola, D.
  • Conejos, D.
  • De Mendivil, J.M.
  • SanMartín, L.O.
  • Lifante, G.
  • Peña, J.I.
In this work glass rods of (MgxCa1-x)3Al2Si3O12 (x = 0, 0-5 and 1) doped with 1 wt% Nd2O3 were produced by the laser floating zone technique. Thermo-mechanical and spectroscopic properties have been evaluated. The three glass samples present good thermo-mechanical properties, with similar hardness, toughness and glass transition temperatures. The spectroscopic characterization shows spectral shifts in absorption and emission spectra. These spectral shifts together with Judd-Ofelt intensity parameters and ionic packing ratio have been used to investigate the local structure surrounding the Nd3+ ions and the covalency of the Nd-O bond. All obtained results agree and confirm the higher covalency of the Nd-O bond in the Ca3Al2Si3O12 glass.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bioeutectic® ceramics for biomedical application obtained by laser floating zone method. In vivo evaluation

  • De Aza, P.N.
  • Peña, J.I.
  • Luklinska, Z.B.
  • Meseguer-Olmo, L.
In this study, the Bioeutectic® blocks were inserted into the critical size defects of eight rabbits, using both tibiae, and the physical and chemical nature of the remodeled interface between the Bioeutectic® implants and the surrounding bone were performed at four and 15 months. The results showed a new fully mineralized bone growing in direct contact with the implants. The ionic exchange, taking place at the implant interface with the body fluids was essential in the process of the implant integration through a dissolution-precipitation-transformation mechanism. The study found the interface biologically and chemically active over the 15 months implantation period. The osteoblastic cells migrated towards the interface and colonized the surface at the contact areas with the bone. The new developed apatite structure of porous morphology mimics natural bone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

UV-laser marking of a TiO2-containing ABS material

  • Oriol Langa, Luis Teodoro
  • Clemente, M.J.
  • Lavieja, C.
  • Peña, J.I.
Marking of titanium dioxide-containing ABS polymeric samples was accomplished using a UV laser that induces a white to grey color change with only a minor alteration of the plastic material. The characterization of this marking process has been conducted by different techniques to determine the quality of the UV-laser marking and to gain an insight into how the plastic material is affected by laser irradiation. Surface characterization was performed and tests were conducted to evaluate the potential applications of this UV-marking process. POLYM. ENG. SCI., 58:1604-1609, 2018. (c) 2017 Society of Plastics Engineers
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of the wavelength dependence in laser ablation of advanced ceramics and glass-ceramic materials in the nanosecond range

  • Sola, D.
  • Peña, J. I.
In this work, geometrical dimensions and ablation yields as a function of the machining method and reference position were studied when advanced ceramics and glass-ceramic materials were machined with pulsed lasers in the nanosecond range. Two laser systems, emitting at 1064 and 532 nm, were used. It was shown that the features obtained depend on whether the substrate is processed by means of pulse bursts or by grooves. In particular, when the samples were processed by grooves, machined depth, removed volume and ablation yields reached their maximum, placing the sample out of focus. It was shown that these characteristics do not depend on the processing conditions, the wavelength or the optical configuration, and that this is intrinsic behavior of the processing method. Furthermore, the existence of a close relation between material hardness and ablation yields was demonstrated.