Pasar al contenido principal

NUEVOS MATERIALES CON DIFERENTES CENTROS ACTIVOS INCORPORADOS EN POSICIONES ESPECIFICAS DE LA RED Y SU APLICACION PARA PROCESOS CATALITICOS MULTI-ETAPA Y NANOTECNOLOGICOS

MAT2014-52085-C2-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recyclable swelling solutions for friendly preparation of pillared MWW-type zeolites

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We studied the recycling of swelling solution of MWW-type lamellar zeolitic precursor with a Si/Al = 25. Swollen materials were obtained up to a third reuse without any compensation of reactants, pH or decrease of lamellar ordering degree. The pillared material showed a surface area of 777 m(2) g(-1) and mesopores sizes of 2-4 nm characteristic of pillared MWW materials obtained by traditional approaches., Anderson Joel Schwanke thanks the CAPES Foundation and PDSE program (process number 99999.004779/2014-02). Urbano Diaz acknowledges to the Spanish Government (MAT2014-52085C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic performance of commercial Cu-ZSM-5 zeolite modified by desilication in NH3-SCR and NH3-SCO processes

  • Rutkowska, Malgorzata
  • Pacia, I.
  • Basag, S.
  • Kowalczyk, A.
  • Piwowarska, Z.
  • Duda, M.
  • Tarach, K.A.
  • Gora-Marek, K.
  • Michalik, M.
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In the presented manuscript an influence of the mesoporosity generation in commercial ZSM-5 zeolite on its catalytic performance in two environmental processes, such as NO reduction with ammonia (NH3SCR, Selective Catalytic Reduction of NO with NH3) and NH3 oxidation (NH3-SCO, Selective Catalytic Oxidation of NH3) was examined. Micro-mesoporous catalysts with the properties of ZSM-5 zeolite were obtained by desilication with NaOH and NaOH/TPAOH (tetrapropylammonium hydroxide) mixture with different ratios (TPA+/OH- = 0.2, 0.4, 0.6, 0.8 and infinity) and for different durations (1, 2, 4 and 6 h). The results of the catalytic studies (over the Cu-exchanged samples) showed higher activity of this novel mesostructured group of zeolitic materials. Enhanced catalytic performance was related to the generated mesoporosity (improved Hierarchy Factor (HF) of the samples), that was observed especially with the use of Pore Directing Agent (PDA) additive, TPAOH. Applied desilication conditions did not influence significantly the crystallinity of the samples (X-ray diffraction analysis (XRD)), despite the treatment for 6 h in NaOH solution, which was found to be too severe to preserve the zeolitic properties of the samples. The modified porous structure and accessibility of acid sites (increased surface acidity determined by temperature programmed desorption of ammonia (NH3-TPD)) influenced the red-ox properties of copper species introduced by ion-exchange method (temperature programmed reduction with hydrogen (H-2-TPR). Increased acidity of the micro-mesoporous samples, as well as the content of easily reducible copper species resulted in a significant improvement of Cu-ZSM-5 catalytic efficiency in the NH3-SCR and NH3-SCO processes. (C) 2017 Elsevier Inc. All rights reserved., This work was supported by the National Science Center under grant no. 2011/03/N/ST5/04820. Part of the research was carried out with the equipment purchased thanks to the financial support of the European Regional Development Fund in the framework of the Polish Innovation Economy Operational Program (contract no. POIG.02.01.00-12-023/08). U. D. acknowledges to Spanish Government by the funding (MAT2014-52085-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic properties of pristine and defect-engineered Zr-MOF-808 metal organic frameworks

  • Mautschke, Hans-Hilmar
  • Drache, F.
  • Senkovska, I.
  • Kaskel, S.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Various defect-engineered Zr-trimesate MOF-808 compounds (DE-MOF-808) have been prepared by mixing the tricarboxylate ligands with dicarboxylate ligands; viz. isophthalate, pyridine-3,5-dicarboxylate, 5-hydroxy-isophthalate, or 5-amino-isophthalate. The resulting mixed-ligand compounds, MOF-808-X (X = IP, Pydc, OH or NH2) were all found to be highly crystalline and isostructural to the unmodified MOF-808. Pristine MOF-808 showed better catalytic performance than a UiO-66 reference compound for the Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl compounds. This was attributed to a higher availability of coordinatively unsaturated Zr4+ sites (cus) in MOF-808 upon removal of formate ions. Meanwhile, cus in UiO-66 are only located at defect sites and are thus much less abundant. Further improvement of the catalytic activity of defect-engineered MOF-808-IP and MOF-808-Pydc was observed, which may be related with the occurrence of less crowded Zr4+ sites in DE-MOF-808. The wider pore structure of MOF-808 with respect to UiO-66 compounds translates into a sharp improvement of the activity for the MPV reduction of bulky substrates, as shown for estrone reduction to estradiol. Interestingly, MOF-808 produces a notable diastereoselectivity towards the elusive 17--hydroxy estradiol., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET). Financial support from the Spanish Ministry of Economy and Competitiveness (program Severo Ochoa SEV20120267), the Spanish Ministry of Science and Innovation (project MAT2014-52085-C2-1-P), and the German Research Foundation (project KA 1698/19-1) is also gratefully acknowledged. The Microscopy Service of the Universitat Politecnica de Valencia are gratefully acknowledged for the SEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nature of active sites on UiO-66 and beneficial influence of water in the catalysis of Fischer esterification

  • Caratelli, Chiara
  • Hajek, J.
  • García Cirujano, Francisco
  • Warroquier, M.
  • Van Speybroeck, Veronique
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Zirconium terephthalate UiO-66 type metal organic frameworks (MOFs) are known to be highly active, stable and reusable catalysts for the esterification of carboxylic acids with alcohols. Moreover, when defects are present in the structure of these MOFs, coordinatively unsaturated Zr ions with Lewis acid properties are created, which increase the catalytic activity of the resulting defective solids. In the present work, molecular modeling techniques combined with new experimental data on various defective hydrated and dehydrated materials allow to unravel the nature and role of defective active sites in the Fischer esterification and the role of coordinated water molecules to provide additional Bronsted sites. Periodic models of UiO-66 and UiO-66-NH2 catalysts have been used to unravel the reaction mechanism on hydrated and dehydrated materials. Various adsorption modes of water and methanol are investigated. The proposed mechanisms are in line with experimental observations that amino groups yield a reduction in the reaction barriers, although they have a passive role in modulating the electronic structure of the material. Water has a beneficial role on the reaction cycle by providing extra Bronsted sites and by providing stabilization for various intermediates through hydrogen bonds. (C) 2017 The Authors. Published by Elsevier Inc., This work is supported by the Fund for Scientific Research Flanders (FWO) (project number 3G048612), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET). Funding was also received from the European Union's Horizon 2020 research and innovation programme [consolidator ERC grant agreement no. 647755-DYNPOR (2015-2020)]. Computational resources (Stevin Supercomputer Infrastructure) and services were provided by Ghent University. Financial support from the Generalitat Valenciana (project AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (program Severo Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (project MAT2014-52085-C2-1-P) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ordered covalent organic frameworks, COFs and PAFs. From preparation to application

  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Covalent organic frameworks, COFs, and their derived sub-groups based on auto-assembly of exclusivelyaromatic units, PAFs, are emerging into the advanced materials field due to their high free porous volume,structural regularity, robustness, hydrothermal stability, and functional variety. They present high gasuptake capacities and presence of stabilized active functions in the framework. This together with chargedlow-density structures combined with their organization through -conjugated system arrays, open thepossibilities of COFs and PAFs to be used as effective materials for adsorption, selective separation andcatalysis, and in nanotechnological applications. This review will be focused on self-assembly synthesis mechanisms, physico-chemical characteristics, and applications of this class of promising covalent porousorganic structures, out looking their possible future approaches and perspectives., This work was funded by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The European Union isalso acknowledged by ERC-AdG-2014-671093 – SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Zeolite Protective Overlayer on the Performances of Pd Thin Film Membrane on Tubular Asymmetric Alumina Supports

  • Abate, Salvatore
  • Prieto Arnal, Alejandro
  • Gentiluomo, Serena
  • Perathoner, Siglinda
  • Centi, Gabriele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The role of zeolite overlayer in the performance of Pd thin film membranes on asymmetric alumina tubular supports is analyzed. These novel multilayer membranes have a ceramic base support (asymmetric α-Al2O3 tubes) on which a crack-free Pd dense thin film was deposited by electroless plating deposition followed by creation of a further zeolite (titanium silicalite, TS-1) membrane compact layer on the top of the Pd thin film. The TS-1 layer was prepared by a two-step procedure: (i) the preseeding with TS-1 nanocrystals by dip-coating, eventually assisted by a polymer (PEI or PDADMAC), followed by (ii) a secondary growth. The composite membranes are crack-free and homogeneous, and show good mechanical properties, in terms of adhesion between metallic film and substrate, and between the zeolitic film and Pd thin film. The composite membranes were evaluated in terms of H2 permeance with respect to bare Pd membrane. The zeolite overlayer induces a change in the rate-limiting step in H2 transport, due to the partial coverage of Pd surface by zeolite, compensated by an increase in the sticking coefficient of H2 adsorption. These materials were tested to protect Pd from deactivation by propylene, for use in catalytic membrane reactors for propane dehydrogenation., The research leading to these results has received funding from European Community's Seventh Framework Programme, through the Collaborative Project INCAS, Contract No. NMP2-LA-2010-245988. A.P., M.P., U.D., and A.C. thank the Spanish Government (MAT2014-52085-C2-1-P, Consolider-Ingenio MULTICAT CSD2009-00050 and Severo Ochoa Excellence Program SEV-2012-0267) for additional funds. A.P., M.P., U.D., and A.C. also thank the Electron Microscopy Service of the UPV for their help in sample characterization. SA, S.G., S.P., and G.C. thank the Italian Ministero degli Affari Esteri e della Cooperazione Internazionale, in the frame of MEME project MAE13A2CEN, for additional support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the Photodynamics of a New 2D-MOF Composite: Nile Red@Al-ITQ-HB

  • Caballero-Mancebo, Elena
  • Cohen, Boiko
  • Moreno Rodríguez, José María
  • Douhal, Abderrazzak
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In this work, we unravel the photodynamics of Nile Red (NR) interacting with Al-ITQ-HB nanostructure, a new layer-type metal-organic framework (MOF) with potential catalytic and photonic applications. Steady-state spectroscopy reveals the presence of NR monomers and aggregates when interacting with the MOF structure. Time-resolved experiments provide emission lifetimes of the interacting monomers, H-and J-type aggregates. We observed contributions from two monomer populations having different environments. One monomer species emits from the local-excited state and another from a photo-produced charge-separated state resulting from an ultrafast intramolecular charge transfer (ICT). Femtosecond fluorescence experiments reveal that the ICT process occurs in similar to 1 ps. Fluorescence microscopy on single crystals and agglomerates of the composites shows a homogenous distribution of the dye lifetimes within the material. This study shows that the photobehavior of NR in Al-ITQ-HB MOF is dictated by its location within the material. The reported findings using a well-known polarity probe and a new two-dimensional MOF provide information on the microenvironment of this material, which may help for designing smart MOFs with potential applications in photonics and nanocatalysis, This work was supported by MINECO and JCCM through projects: MAT2014-52085-C2-1-P, MAT2014-57646-P, and PEII-2014-003-P. J.M.M. thanks the predoctoral fellowship from the Severo Ochoa program for economical support (SEV-2016-0683) and E.C.-M. thanks the MINECO for the FPI fellowship
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pot two-step process for direct propylene oxide production catalyzed by bi-functional Pd(Au)@TS-1 materials

  • Prieto Arnal, Alejandro
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Different bi-functional materials (Pd(Au)@TS-1) based on metallic nanoparticles supported onto active nanocrystalline titanium silicalite (TS-1) zeolites were synthesized, characterized and used as recyclable heterogeneous catalysts for direct propylene oxide production from hydrogen, oxygen and propylene through one-pot two-step consecutive process. These catalysts allowed carrying out the combined reaction where metallic nanoparticles catalyzed the formation of in situ H2O2 that was the necessary intermediate for propylene epoxidation catalyzed by active TS-1 nanocrystalline support. Several variables were considered such as use of supercritical CO2 conditions, modifiable content of metallic species, and presence of additional co-solvents, surface acidity inhibitors and H2O2 stabilizers. Reusability and stability of the bi-functional catalyst was showed through consecutive catalytic cycles., The research leading to these results has received funding from European Community’s Seventh Framework Programme, through the Collaborative Project INCAS, Contract Nr. NMP2-LA-2010- 245988. Authors thank additional funds from Spanish Government (MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2012-0267).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The influence of swelling agents molecular dimensions on lamellar morphology of MWW-type zeolites active for fructose conversion

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new route to obtain pillared, disordered or desilicated MWW-type zeolites was developed assisted by quaternary ammonium surfactants with different hydrocarbon tail size acting as swelling agents (C(12)TA(+), C(I6)TA(+), C(18)TA(+)) and TPA(+) both exchanged to their hydroxide forms instead of only one swelling agent (C(n)TA(+) or TPA(+)) in hydroxide form. Effect of surfactant concentration and swelling conditions were determinant to obtain MWW-type zeolites with different lamellar organization and spatial distribution of individual zeolitic layers. Specifically, soft swelling at 25 degrees C with C(12)TA(+) preserved layer structure reaching a final disordered/pillared structure while pillared structures are obtained in the case of materials swollen with C(16)TA(+) and C(18)TA(+). Aggressive swelling processes at 80 degrees C favored desilication, damaging the layers structure in case of C(12)TA(+) while pillared materials are obtained after swollen with C(16)TA(+) and C(18)TA(+) surfactants. It was proved that both swelling agents in hydroxide forms combining with swelling and pillaring procedure influenced on physico-chemical and morphological nature of MWW-type materials due to the particular conditions used. The obtained derivative MWW zeolites with different morphology, order and accessibility levels were firstly evaluated by catalytic dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) showing superior activity compared to beta zeolites reported in literature., Anderson Joel Schwanke is grateful to CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from Ministry of Education of Brazil. U.D and A.C acknowledge to the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and to the Generalitat Valenciana (Prometeo 11/2013-011) by the funding. The European Union is also acknowledged by ERC-AdG-2014-671093 - SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chiral hybrid materials based on pyrrolidine building units to perform asymmetric Michael additions with high stereocontrol

  • Llopis-Perez, Sebastian
  • Garcia Fernandez, Maria Teresa
  • Cantin, A.
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic-inorganic structure, from a specific bis-silylated precursor. A fluoride sol-gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to -nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. S. Ll. thanks predoctoral fellowships from MINECO for economical support (BES-2015-072627). The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dandelion-Like Microspherical MCM-22 Zeolite Using BP 2000 as a Hard Template

  • Schwanke, Anderson
  • Villarroel-Rocha, Jhonny
  • Sapag, Karim
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The chemistry between layered MWW zeolite and carbon black pearls (BP 2000) as an inexpensive hard template was investigated to develop a rational one-pot synthesis of MCM-22 microspheres. The characterization results showed that the insertion of BP 2000 in the gel synthesis did not substantially compromise the crystallinity and microporosity, and the microscopic analyses showed that BP 2000 played a key role in controlling the final morphology of the MCM-22 zeolite, creating beautiful dandelion-like microspherical particles. The morphology obtained is due to the tortuous shape of the hard template, the particular MWW particle crystals, the interaction with the external surface of the MWW zeolitic precursor, and the synthesis conditions. The stacking of MWW crystals with edge-to-face orientations generates meso-/macrovoids, allowing access to the interiors of the microspheres. The microspheres were homogeneous with sizes ranging from 6 to 8 mu m with an increase of the external surface and a macroporous size distribution centered at 200 nm, which is two times that of the traditional MCM-22 zeolite, A.J.S. is grateful to the CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from the Ministry of Education of Brazil. U.D. and A.C. acknowledge funding by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and the Generalitat Valenciana (Prometeo). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch. S.P. and K.S. acknowledge the CAPES-CAFP project number 054/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized hybrid nanospheres immobilizing Rhizomucor miehei lipase for chiral biotransformation

  • Verri, Francesca
  • Macario, Anastasia
  • Giordano, Girolamo
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this study, the immobilization of Rhizomucor miehei lipase into hybrid nanospheres containing a liposomal core was reported. Organic internal liposomal enzyme phase was protected by inorganic silica matrix, obtained with and without surfactant, that stabilizes the internal organic phase and isolates and protects the bioactive molecules. The optimized heterogeneous catalyst thus prepared was used for enantioselective esterification of (R,S)-ibuprofen. The influence of several catalytic parameters on the activity of hybrid nanospheres (type of solvent, nature of the alcohol, reaction temperature, etc.,) was investigated. The heterogeneous biocatalysts best performed at 37 degrees C, using isooctane as solvent and 1-propanol as alcohol (with ester yield ranging between 78 and 93%). High activity and stability (up to nine reaction cycles) of enzyme-immobilized hybrid nanospheres, with respect to the free form, were observed. R. miehei lipase, both in its free and immobilized forms, reacts only with the S(+) enantiomer of (R,S)-ibuprofen, in all the tested reaction conditions. (C) 2015 Elsevier Ltd. All rights reserved., The authors thank the financial support from Consolider-Ingenio MULTICAT CSD2009-00050, MAT2014-52085-C2-1-P, and Severo Ochoa Excellence Program SEV-2012-0267.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Growing modulator agents for the synthesis of Al-MOF-type materials based on assembled 1D structural sub-domains

  • Moreno, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Vidal Moya, José Alejandro
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel aluminium MOF-type materials structured by 1D subdomains, such as organic-inorganic nanoribbons, were synthesized by modifying the conditions of solvothermal synthesis and the nature of the solvents in the presence of aryl monocarboxylate linkers with long alkyl chains, which acted as growth-modulating agents. Specifically, three different families of materials were prepared with various morphological characteristics: (i) isoreticular MIL-53(Al)-type materials, (ii) mesoscopic metalorganic structures and (iii) lamellar aluminium MOFs. The length of the alkyl chain in the aryl linker and the hydrophobic/hydrophilic nature of the solvothermal synthesis media determined the structuration level that was achieved. The derived Al-MOFs are active and stable catalysts for the synthesis of fine chemicals. This was illustrated by the efficient synthesis of 2,3-dihydro-2,2,4-trimethyl-1H-1,5-benzodiazepine., The authors are grateful for financial support from the Spanish Government under MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. thanks predoctoral fellowships from MINECO for economic support. The European Union is also acknowledged for ERC-AdG-2014-671093-SynCatMatch
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Arenal, Raul
  • Agostini, Giovanni
  • Díaz, Urbano|||0000-0003-1472-8724
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 degrees C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. The authors also thank the Microscopy Service of UPV for the TEM and STEM measurements. The HAADF-HRSTEM works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), a Spanish ICTS National Facility. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sldodowska-Curie grant agreement No. 642742.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hierarchically structured ZSM-5 obtained by optimized mesotemplate-free method as active catalyst for methanol to DME conversion

  • Rutkowska, Malgorzata
  • Macina, D.
  • Piwowarska, Z.
  • Gajewska, M.
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
In the presented studies, a new method for the synthesis of hierarchical porous materials with ZSM-5 zeolite properties was applied. The proposed method is based on the acidification of the zeolite seeds slurry using HCl solution, followed by hydrothermal treatment, enabling the aggregation of zeolite nanoseeds with the formation of the interparticle mesoporous structure. The influence of the duration of zeolite parent mixture aging before and after acidification on the resulting properties of the samples was investigated. The physicochemical properties of the obtained micro-mesoporous samples were analyzed using techniques such as N-2-sorption measurements, X-ray diffraction, TG analysis, NH3-TPD and electron microscopy. In the second part of the studies, the influence of the modified zeolite sample parameters (such as porosity, acidity and crystallinity) on their catalytic activity for dimethyl ether (DME) synthesis from methanol was studied. DME is considered as a future clean alternative to diesel fuel and the development of methods for its synthesis is currently of high scientific interest. It was shown that modification of the porous structure and acidity of the zeolitic samples strongly influences their catalytic activity, selectivity and stability for the DME synthesis process. The micro-mesoporous samples, despite their significantly lower acidity, exhibited high catalytic activity (similar to conventional ZSM-5 zeolite) and enhanced selectivity towards DME, as well as higher stability in a long term catalytic test (higher resistance to the formation of coke deposits) in comparison to standard MFI-type zeolites., This work was supported by the National Science Center under grant no. 2011/03/N/ST5/04820. Part of the research was carried out with equipment purchased thanks to the financial support of the European Regional Development Fund in the framework of the Polish Innovation Economy Operational Program (contract no. POIG.02.01.00-12-023/08). U. D. gives thanks to Spanish Government by the funding (project MAT2014-52085-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic subdomains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electronwithdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/ Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional Acid and Base Hybrid Catalysts Organized by Associated (Organo)aluminosilicate Layers for C-C Bond Forming Reactions and Tandem Processes

  • Gaona Cordero, Aide
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel bifunctional acid base monolayered hybrid catalysts (MLHMs), based on associated individual (organo)aluminosilicate sheets with amino and sulfonic pending groups located in the interlayer space, have been successfully prepared by direct alkaline hydrothermal synthesis and evaluated in consecutive catalytic transformations. Different characterization techniques such as chemical and thermogravimetrical analyses, X-ray diffraction, TEM microscopy, nuclear magnetic resonance (NMR), temperature programmed desorption of CO2 and NH3 (TPD), and textural measurements were used to show the physicochemical and structural nature of the materials, evidencing their effectiveness as functional acid, base, and acid base catalysts for different one pot two-step tandem reactions, which were performed in the presence of only one active and recoverable lamellar-type hybrid solid catalyst., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2012-0267. A.G. thanks predoctoral fellowships from MINECO for economical support (reference number BES-2012-052429). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Base free transfer hydrogenation using a covalent triazine framework based catalyst

  • Bavykina, Anastasiya
  • Mautschke, Hans-Hilmar
  • Makkee, Michiel
  • Kapteijn, Frederik
  • Gascon, Jorge
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Isomerisation of allylic alcohols to saturated ketones can be efficiently catalysed by a heterogeneous molecular system resulting from (IrCp)-Cp-III* anchoring to a covalent triazine framework. The obtained catalysts are active, selective, and fully recyclable., Financial support from the Generalitat Valenciana (projects Consolider-Ingenio MULTICAT and AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (MINECO) (program Severo Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (MICINN) (project MAT2014-52085-C2-1-P) are gratefully acknowledged. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 641887 (project acronym: DEFNET). Also, financial support from the European Union Seventh Framework Programme (FP7/2007-2013) under the grant agreement number 309701, project Eco2CO<INF>2</INF> is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The influence of ethanol-assisted washes to obtain swollen and pillared MWW-type zeolite with high degree ordering of lamellar structure

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We studied the influence of the ethanol used as a washing solvent for obtaining swollen and pillared MWW topology zeolites with long-range ordering of lamellar structure. The diffractogram results showed that the increased number of washes increases the degree of order of the lamellar structure. Thermogravimetric results showed a considerable removal of the weakly interacting surfactant molecules after the third wash. The washes with ethanol did not remove the surfactant that strongly interacted with the MWW structure. The pillared material after the third wash showed a long-range ordering of the lamellar structure with the surface area of 728 m(2) g(-1), mesopore sizes of 2-4 nm and morphology characteristic of pillared MWW-type zeolites., Anderson Joel Schwanke is grateful the CAPES Foundation and PDSE program (process number 99999.004779/2014-02). Urbano Diaz acknowledges to the Spanish Government (MAT2014-52085-C2-1-P and MAT2017-82288-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-Layered Hybrid Materials Based on 1D Associated Metalorganic Nanoribbons for Controlled Release of Pheromones

  • Moreno Rodríguez, José María
  • Navarro Fuertes, Ismael
  • Díaz, Urbano|||0000-0003-1472-8724
  • Primo Millo, Jaime|||0000-0003-2254-8184
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new family of stable layered organic-inorganic materials has been prepared, in one-step solvothermal process. They are based on an ordered nickel cluster-type nanoribbons separated from each other by specific alkyl (heptyl- or dodecyl-) arylic mono-carboxylate moieties acting as molecular spacers, perpendicular to the 1D inorganic chains. These organic spacers contain hydrocarbon tails with different length which control the separation level between inorganic 1D sub-units, inhibiting the 3D growth of conventional DUT-8-type metal-organic frameworks (MOFs). The lamellar nature of the materials formed was studied and confirmed by different characterization techniques, showing the structural location of individual organic and inorganic building units. They have been successfully used as a long-lasting biodegradable and water-proof materials for controlled release of chemicals, such as pheromones for sustainable treatment of insect plagues., The support of the European Union (ERC-AdG-2014-671093—SynCatMatch) and the Spanish Government (MAT2014-52085-C2-1-P and Severo Ochoa program SEV2012-0267) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diastereoselective Synthesis of Pyranoquinolines on Zirconium-Containing UiO-66 Metal-Organic Frameworks

  • López-Rechac, Víctor
  • García Cirujano, Francisco
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] The Zr terephthalate MOFs UiO-66 and UiO-66-NH2 have been found to be highly diastereoselective catalysts for the synthesis of a pyrano[3,2-c]quinoline through an inverse electron -demand aza-Diels-Alder [4+2] cycloaddition of an aryl Qmine (formed in situ from aniline and benzaldehyde) and 3,4-dihydro-2H-pyran in one pot, affording the corresponding trans isomer in diastereomeric excesses of 90-95 %. The solids are stable under the reaction conditions and can be reused at least three times without significant loss of activity or diastereoselectivity., Financial support from the Generalitat Valenciana (projects Consolider-Ingenio MULTICAT and AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (MINECO) (program Severn Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (MICINN) (project MAT2014-52085-C2-1-P) is gratefully acknowledged. V. L. R. thanks the Fundacion "La Caixa" for a "La Caixa-Severo Ochoa" Ph. D. Scholarship. This project received funding from the European Union's Horizon 2020 Tesearch and Innovation Programme under the Marie Skolodowska Curie grant agreement number 641887.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organic-Inorganic Hybrid Materials: Multi-Functional Solids for Multi-Step Reaction Processes

  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The design of new hybrid materials with tailored properties at the nano-, meso-, and macro-scale, with the use of structural functional nanobuilding units, is carried out to obtain specific multi-functional materials. Organization into controlled 1D, 2D, and 3D architectures with selected functionalities is key for developing advanced catalysts, but this is hardly accomplished using conventional synthesis procedures. The use of pre-formed nanostructures, derived either from known materials or made with specific innovative synthetic methodologies, has enormous potential in the generation of multi-site catalytic materials for one-pot processes. The present concept article introduces a new archetype wherein self-assembled nanostructured builder units are the base for the design of multifunctional catalysts, which combine catalytic efficiency with fast reactant and product diffusion. The article addresses a new generation of versatile hybrid organic-inorganic multi-site catalytic materials for their use in the production of (chiral) high-added-value products within the scope of chemicals and fine chemicals production. The use of those multi-reactive solids for more nanotechnological applications, such as sensors, due to the inclusion of electron donor-acceptor structural arrays is also considered, together with the adsorption-desorption capacities due to the combination of hydrophobic and hydrophilic sub-domains. The innovative structured hybrid materials for multipurpose processes here considered, can allow the development of multi-stage one-pot reactions with industrial applications, using the materials as one nanoreactor systems, favoring more sustainable production pathways with economic, environmental and energetic advantages., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Anion Exchange and Catalytic Functionalization of the Zirconium-Based Metal-Organic Framework DUT-67

  • Drache, Franziska
  • García Cirujano, Francisco
  • Nguyen, Khoa D.
  • Bon, Volodymyr
  • Senkovska, Irena
  • Kaskel, Stefan
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] A postsynthetic treatment with diluted solutions of the inorganic HCl or H2SO4 acids was applied to functionalize the eight connected Zr-based metal-organic framework DUT-67 (DUT = Dresden University of Technology). During the treatment, it is possible to remove and exchange the pristine modulator (formate) by Cl(-)or SO(4)(2-)anions. The position of the chlorine in the crystal structure of DUT-67 after HCl treatment could be determined by single-crystal X-ray diffraction analysis. Moreover, by means of the acidic treatment the polarity of the network as well as its Bronsted acid strength are increased, which have a crucial impact on the catalytic performance. The improved catalytic activity of the acid-treated materials was demonstrated in the esterification of levulinic acid with ethanol., This project received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant No. 641887 (project acronym: DEFNET). The Spanish Ministry of Economy and Competitiveness (program "Severo Ochoa"), the Spanish Ministry of Science and Innovation (Project No. MAT2014-52085-C2-1-P), and the German Research Foundation (Project No. KA 1698/19-1) are also acknowledged for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional acid and base hybrid catalysts organized by associated (organo)aluminosilicate layers for C-C bond forming reactions and tandem processes

  • Gaona, Aidé
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel bifunctional acid-base monolayered hybrid catalysts (MLHMs), based on associated individual (organo)aluminosilicate sheets with amino and sulfonic pending groups located in the interlayer space, have been successfully prepared by direct alkaline hydrothermal synthesis and evaluated in consecutive catalytic transformations. Different characterization techniques such as chemical and thermogravimetrical analyses, X-ray diffraction, TEM microscopy, nuclear magnetic resonance (NMR), temperature-programmed desorption of CO and NH (TPD), and textural measurements were used to show the physicochemical and structural nature of the materials, evidencing their effectiveness as functional acid, base, and acid-base catalysts for different one-pot two-step tandem reactions, which were performed in the presence of only one active and recoverable lamellar-type hybrid solid catalyst., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P and Severo Ochoa Excellence Program SEV-2012-0267. A.G. thanks predoctoral fellowships from MINECO for economical support (reference number BES-2012-052429). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Díaz Morales, Urbano
  • Arenal, Raúl
  • Agostini, Giovanni
  • Concepción, Patricia
  • Corma, Avelino
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influencing the activity and selectivity of alkylaromatic catalytic transformations by varying the degree of delamination in MWW zeolites

  • Osman, Mogahid
  • Al-Khattaf, Sulaiman
  • Díaz Morales, Urbano
  • Martínez Sánchez, Cristina
  • Corma, Avelino
The degree of delamination and chemical composition of MWW zeolites have been varied by adjusting the synthesis parameters and modifying the temperature of the swelling step applied to the layered precursor (MCM-22(P)), and their impact on the catalytic behavior of these MWW materials for alkylaromatic transformation reactions has been studied. Kinetic experiments performed in a fluidized-type riser simulator have allowed us to establish a complete reaction network and to discern the impact of the catalyst's variables on competing alkylation and transalkylation of alkylbenzene molecules. In this way, the positive effect of delamination of the MWW layered precursor regarding the selectivity for the alkylation product with respect to transalkylation and catalyst deactivation has been confirmed by comparing a microporous MCM-22 with a highly delaminated ITQ-2 obtained from the same layered precursor, and also for 3D MCM-22 and highly delaminated ITQ-2 with comparable acidic properties., We are grateful for the support from the Ministry of Higher Education, Saudi Arabia, for the establishment of the Center of Research Excellence in Petroleum Refining and Petrochemicals at King Fahd University of Petroleum and Minerals (KFUPM). Financial support by the Spanish Government MINECO through “Severo Ochoa” (SEV 2012-0267), Consolider Ingenio 2010-Multicat, MAT2012-31657 and MAT2014-52085-C2-1-P, by the European Union by ERC-AdG-2014-671093 (SynCatMatch) and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ordered covalent organic frameworks, COFs and PAFs. From preparation to application

  • Díaz Morales, Urbano
  • Corma, Avelino
Covalent organic frameworks, COFs, and their derived sub-groups based on auto-assembly of exclusively aromatic units, PAFs, are emerging into the advanced materials field due to their high free porous volume, structural regularity, robustness, hydrothermal stability, and functional variety. They present high gas uptake capacities and presence of stabilized active functions in the framework. This together with charged low-density structures combined with their organization through π-conjugated system arrays, open the possibilities of COFs and PAFs to be used as effective materials for adsorption, selective separation and catalysis, and in nanotechnological applications. This review will be focused on self-assembly synthesis mechanisms, physico-chemical characteristics, and applications of this class of promising covalent porous organic structures, out looking their possible future approaches and perspectives., This work was funded by the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The European Union is also acknowledged by ERC-AdG-2014-671093 – SynCatMatch., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of swelling agents molecular dimensions on lamellar morphology of MWW-type zeolites active for fructose conversion

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz Morales, Urbano
  • Corma, Avelino
A new route to obtain pillared, disordered or desilicated MWW-type zeolites was developed assisted by quaternary ammonium surfactants with different hydrocarbon tail size acting as swelling agents (C12TA+, C16TA+, C18TA+) and TPA+ both exchanged to their hydroxide forms instead of only one swelling agent (CnTA+ or TPA+) in hydroxide form. Effect of surfactant concentration and swelling conditions were determinant to obtain MWW-type zeolites with different lamellar organization and spatial distribution of individual zeolitic layers. Specifically, soft swelling at 25 °C with C12TA+ preserved layer structure reaching a final disordered/pillared structure while pillared structures are obtained in the case of materials swollen with C16TA+ and C18TA+. Aggressive swelling processes at 80 °C favored desilication, damaging the layers structure in case of C12TA+ while pillared materials are obtained after swollen with C16TA+ and C18TA+ surfactants. It was proved that both swelling agents in hydroxide forms combining with swelling and pillaring procedure influenced on physico-chemical and morphological nature of MWW-type materials due to the particular conditions used. The obtained derivative MWW zeolites with different morphology, order and accessibility levels were firstly evaluated by catalytic dehydration of fructose to 5-hydroxymethylfurfural (5-HMF) showing superior activity compared to beta zeolites reported in literature., Anderson Joel Schwanke is grateful to CAPES Foundation and PDSE program (process number 99999.004779/2014-02) from Ministry of Education of Brazil. U.D and A.C acknowledge to the Spanish Government (Severo Ochoa program SEV-2012-0267 and MAT2014-52085-C2-1-P) and to the Generalitat Valenciana (Prometeo II/2013-011) by the funding. The European Union is also acknowledged by ERC-AdG-2014-671093 – SynCatMatch., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-layered hybrid materials based on 1D associated metalorganic nanoribbons for controlled release of pheromones

  • Moreno, José María
  • Navarro, Ismael
  • Díaz Morales, Urbano
  • Primo Millo, Jaime
  • Corma, Avelino
Communication., A new family of stable layered organic–inorganic materials has been prepared, in one-step solvothermal process. They are based on an ordered nickel cluster-type nanoribbons separated from each other by specific alkyl (heptyl- or dodecyl-) arylic mono-carboxylate moieties acting as molecular spacers, perpendicular to the 1D inorganic chains. These organic spacers contain hydrocarbon tails with different length which control the separation level between inorganic 1D sub-units, inhibiting the 3D growth of conventional DUT-8-type metal–organic frameworks (MOFs). The lamellar nature of the materials formed was studied and confirmed by different characterization techniques, showing the structural location of individual organic and inorganic building units. They have been successfully used as a long-lasting biodegradable and water-proof materials for controlled release of chemicals, such as pheromones for sustainable treatment of insect plagues., The support of the European Union (ERC‐AdG‐2014‐671093—SynCatMatch) and the Spanish Government (MAT2014‐52085‐C2‐1‐P and Severo Ochoa program SEV‐2012‐0267) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral Hybrid Materials Based on Pyrrolidine Builder Units to Perform Asymmetric Michael Additions with High Stereocontrol

  • Llopis, Sebastián
  • García Ramón, María Teresa
  • Cantín, Ángel
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic–inorganic structure, from a specific bis-silylated precursor. A fluoride sol–gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to β-nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288- C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic-Inorganic Hybrid Materials: Multi-Functional Solids for Multi-Step Reaction Processes

  • Díaz Morales, Urbano
  • Corma, Avelino
The design of new hybrid materials with tailored properties at the nano-, meso-, and macro-scale, with the use of structural functional nanobuilding units, is carried out to obtain specific multi-functional materials. Organization into controlled 1D, 2D, and 3D architectures with selected functionalities is key for developing advanced catalysts, but this is hardly accomplished using conventional synthesis procedures. The use of pre-formed nanostructures, derived either from known materials or made with specific innovative synthetic methodologies, has enormous potential in the generation of multi-site catalytic materials for one-pot processes. The present concept article introduces a new archetype wherein self-assembled nanostructured builder units are the base for the design of multifunctional catalysts, which combine catalytic efficiency with fast reactant and product diffusion. The article addresses a new generation of versatile hybrid organic-inorganic multi-site catalytic materials for their use in the production of (chiral) high-added-value products within the scope of chemicals and fine chemicals production. The use of those multi-reactive solids for more nanotechnological applications, such as sensors, due to the inclusion of electron donor-acceptor structural arrays is also considered, together with the adsorption-desorption capacities due to the combination of hydrophobic and hydrophilic sub-domains. The innovative structured hybrid materials for multipurpose processes here considered, can allow the development of multi-stage one-pot reactions with industrial applications, using the materials as one nanoreactor systems, favoring more sustainable production pathways with economic, environmental and energetic advantages., The authors are grateful for financial support from the Spanish Government by MAT2014‐52085‐C2‐1‐P and Severo Ochoa Excellence Program SEV‐2016‐0683. The European Union is also acknowledged by ERC‐AdG‐2014‐671093‐SynCatMatch.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth-modulating agents for the synthesis of Al-MOF-type materials based on assembled 1D structural subdomains

  • Moreno, José María
  • Velty, Alexandra Isabelle Lucienne
  • Vidal-Moya, Alejandro
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel aluminium MOF-type materials structured by 1D subdomains, such as organic-inorganic nanoribbons, were synthesized by modifying the conditions of solvothermal synthesis and the nature of the solvents in the presence of aryl monocarboxylate linkers with long alkyl chains, which acted as growth-modulating agents. Specifically, three different families of materials were prepared with various morphological characteristics: (i) isoreticular MIL-53(Al)-type materials, (ii) mesoscopic metalorganic structures and (iii) lamellar aluminium MOFs. The length of the alkyl chain in the aryl linker and the hydrophobic/hydrophilic nature of the solvothermal synthesis media determined the structuration level that was achieved. The derived Al-MOFs are active and stable catalysts for the synthesis of fine chemicals. This was illustrated by the efficient synthesis of 2,3-dihydro-2,2,4-trimethyl-1H-1,5-benzodiazepine., The authors are grateful for financial support from the Spanish Government under MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. thanks predoctoral fellowships from MINECO for economic support. The European Union is also acknowledged for ERC-AdG-2014-671093-SynCatMatch.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno, José María
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic sub-domains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electron-withdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, L.
  • Díaz, U.
  • Arenal, R.
  • Agostini, G.
  • Concepción, P.
  • Corma, A.
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene.