Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-organic and covalent organic frameworks as single-site catalysts

  • Rogge, S. M. J.
  • Bavykina, Anastasiya
  • Hajek, J.
  • Olivos-Suarez, A. I.
  • Sepulveda-Escribano, A.
  • Vimont, A.
  • Clet, G.
  • Bazin, P.
  • Kapteijn, Freek
  • Daturi, M.
  • Ramos-Fernandez, Enrique V.
  • Van Speybroeck, Veronique
  • Gascon, Jorge
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions., S. M. J. Rogge, J. Hajek, and V. Van Speybroeck acknowledge the Fund for Scientific Research - Flanders (FWO), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05 for financial support. V. Van Speybroeck acknowledges funding from the European Union's Horizon 2020 research and innovation programme (consolidator ERC grant agreement no. 647755 - DYNPOR (2015-2020)). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 641887 (project acronym: DEFNET). W. Dewitte and C. Caratelli are acknowledged for technical support with the figures. J. Gascon acknowledges funding from the European Union's 2020 research and innovation programme (ERC grant agreement no. 335746 - CrystEng-MOF-MMM) and from the Dutch Organization for Scientific Research (NWO, VIDI grant agreement 723.012.107 - MetMOFCat).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic properties of pristine and defect-engineered Zr-MOF-808 metal organic frameworks

  • Mautschke, Hans-Hilmar
  • Drache, F.
  • Senkovska, I.
  • Kaskel, S.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Various defect-engineered Zr-trimesate MOF-808 compounds (DE-MOF-808) have been prepared by mixing the tricarboxylate ligands with dicarboxylate ligands; viz. isophthalate, pyridine-3,5-dicarboxylate, 5-hydroxy-isophthalate, or 5-amino-isophthalate. The resulting mixed-ligand compounds, MOF-808-X (X = IP, Pydc, OH or NH2) were all found to be highly crystalline and isostructural to the unmodified MOF-808. Pristine MOF-808 showed better catalytic performance than a UiO-66 reference compound for the Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl compounds. This was attributed to a higher availability of coordinatively unsaturated Zr4+ sites (cus) in MOF-808 upon removal of formate ions. Meanwhile, cus in UiO-66 are only located at defect sites and are thus much less abundant. Further improvement of the catalytic activity of defect-engineered MOF-808-IP and MOF-808-Pydc was observed, which may be related with the occurrence of less crowded Zr4+ sites in DE-MOF-808. The wider pore structure of MOF-808 with respect to UiO-66 compounds translates into a sharp improvement of the activity for the MPV reduction of bulky substrates, as shown for estrone reduction to estradiol. Interestingly, MOF-808 produces a notable diastereoselectivity towards the elusive 17--hydroxy estradiol., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET). Financial support from the Spanish Ministry of Economy and Competitiveness (program Severo Ochoa SEV20120267), the Spanish Ministry of Science and Innovation (project MAT2014-52085-C2-1-P), and the German Research Foundation (project KA 1698/19-1) is also gratefully acknowledged. The Microscopy Service of the Universitat Politecnica de Valencia are gratefully acknowledged for the SEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Zirconium Metal Organic Frameworks as Heterogeneous Catalysts for Meerwein-Ponndorf-Verley Reactions

  • Mautschke, Hans-Hilmar
[ES] Se han preparado varios materiales metal orgánicos de circonio MOF-808 para evaluar sus propiedades catalíticas en reacciones tipo Meerwein-Ponndorf-Verley (MPV) para la reducción de compuestos carbonílicos. En particular, se han sintetizado compuestos tipo MOF-808 modificados en los que una pequeña fracción de los ligandos trimesato presentes en el MOF original se ha reemplazado por ligandos dicarboxilato, como una estrategia para inducir la creación controlada de defectos estructurales. Los ligandos utilizados han sido: isoftalato (MOF-808-IPA), 3,5-piridindicarboxilato (MOF-808-Pydc), 5- aminoisoftalato (MOF-808-NH2) y 5-hidroxiisoftalato (MOF-808-OH). Todos los materiales obtenidos presentan una elevada cristalinidad y son isoreticulares respecto al MOF-808 original. Se ha evaluado la actividad catalítica del MOF-808 original y de los materiales modificados en reacciones tipo MPV, utilizando ciclohexanona como compuesto modelo. Todos los materiales presentan una elevada actividad catalítica, superior a la del tereftalato de circonio UiO-66 utilizado como referencia. Esta mayor actividad catalítica se corresponde a un mayor número de iones Zr4+ con insaturación coordinativa presentes en el MOF-808 con respecto al UiO-66. Además, los materiales MOF-808-IPA y MOF-808-Pydc presentan una mayor actividad que el MOF-808 original, lo que se debe a la presencia de centros activos menos congestionados estéricamente debido a la introducción de los ligandos dicarboxilato. Una ventaja adicional de compuestos MOF-808 con respecto al UiO-66 es su sistema de poros más grande, lo que permite la conversión de moléculas de mayor tamaño. Para evaluar esta característica, se ha utilizado un compuesto de gran tamaño, la estrona, capaz de penetrar en los poros del MOF-808 pero no en el UiO-66. En consecuencia, el MOF-808 es capaz de convertir por completo la estrona de forma selectiva a estradiol, mientras que el UiO-66 apenas presenta actividad. Además, cuando se usa el MOF-808 como catalizador, se produce una cantidad considerable del isómero 17alfa-estradiol, difícil de obtener por otros medios, por lo que las propiedades de diastereoselectividad del MOF-808 en reacciones MPV resultan de gran interés preparativo. Con el fin de estudiar en mayor detalle la diastereoselectividad de reacciones MPV catalizadas por MOF-808, se ha estudiado la reducción de ciclohexanonas substituidas: 3-metilciclohexanona (3MeCH), 2-metilciclohexanona (2MeCH) y 2-fenil-ciclohexanona (2PhCH). En función del alcohol utilizado como reductor y de la posición del grupo substituyente en la ciclohexanona, el MOF-808 favorece selectivamente la formación de uno u otro isómero, con una diastereoselectividad variable: 82%, 61% y 94%, respectivamente para 3MeCH, 2MeCH y 2PhCH. Es posible racionalizar estos resultados considerando la formación preferencial de uno u otro estado de transición en el espacio confinado disponible dentro de los poros del MOF. Las características energéticas del proceso se han analizado mediante el uso combinado de estudios cinéticos y cálculos teóricos. Finalmente, en vista las interesantes propiedades del MOF-808 como catalizador para reacciones MPV, se ha extendido con éxito el uso de este material a la preparación de compuestos hidroxiesteroides de difícil obtención y de interés farmacológico mediante la reducción quimio-, regioy diastereoselectiva del correspondiente oxoesteroide. De esta forma, se han conseguido obtener en un solo paso de reacción y con una elevada selectividad los siguientes compuestos: 17alfa-estradiol, 5alfa- androstan-3beta,17alfa-diol y epitestosterona, lo que demuestra el potencial del MOF-808 como catalizador para la síntesis de compuestos de alto valor añadido., [CA] S'han preparat varis materials metall orgànics de zirconi MOF-808 per avaluar les seves propietats catalítiques en reaccions tipus Meerwein-Ponndorf-Verley (MPV) per a la reducció de composts carbonílics. En particular, s'han sintetitzat composts tipus MOF-808 modificats en els que una petita fracció dels lligands trimesat presents en el MOF original s'han reemplaçat per lligands dicarboxilats, com una estratègia per induir la creació controlada de defectes estructurals. Els lligands utilitzats han sigut: isoftalat (MOF-808-IPA), 3,5-piridindicarboxilat (MOF-808-Pydc), 5-aminoisoftlatat (MOF-808- NH2) i 5-hidroxiisoftalat (MOF-808-OH). Tots els materials preparats presenten una elevada cristal·linitat i són isoreticular respecte al MOF-808 original. S'ha avaluat l'activitat catalític del MOF-808 original i dels materials modificats en reaccions tipus MPV, utilitzant ciclohexanona com a compost model. Tots els materials presenten una elevada activitat catalítica, superior a la del tereftalat de zirconi UiO-66 utilitzat com a referència. Aquesta major activitat catalítica es correspon a un major nombre d'ions Zr4+ amb insaturació coordinativa presents en el MOF-808 respecte a l'UiO-66. A més, els materials MOF-808-IPA i MOF-808-Pydc presenten una major activitat que el MOF-808 original, el que és debut a la presència de centres actius menys congestionats estèricament debut a la introducció dels lligands dicarboxilat. Un avantatge addicional dels MOF-808 respecte a l'UiO-66 és el seu sistema de porus més gran, que permet la conversió de molècules de major tamany. Per avaluar aquesta característica, s'ha utilitzat un compost de gran taman, l'estrona, capaç de penetrar en els porus del MOF-808 però no en els de l'UiO-66. En conseqüència, el MOF-808 és capaç de convertir completament l'estrona de forma sel·lectiva a l'estradiol, mentre que l'UiO-66 gairebé no presenta activitat catalítica. A més, quan s'usa el MOF- 808 com a catalitzador, es produeix una quantitat considerable de l'isòmer 17alfa-estradiol, difícil d'obtenir per altre medis, de manera que les propietats de diastereoselectivitat del MOF-808 en reaccions MPV resulten de gran interès preparatiu. Per tal d'estudiar en major detall la diastereoselectivitat de reaccions MPV catalitzades per MOF-808, s'ha estudiat la reducció de ciclohexanones substituïdes: 3-metilciclohexanona (3MeCH), 2- metilciclohexanona (2MeCH) i 2-fenil-ciclohexanona (2PhCH). En funció de l'alcohol usat com a reductor i de la posició del grup substituent en la ciclohexanona, el MOF-808 afavoreix selectivament la formació d'un o de l'altre isòmer, amb una diastereoselectivitat variable: 82%, 61% y 94%, respectivament per a 3MeCH, 2MeCH y 2PhCH. És possible racionalitzar aquest resultats considerant la formació preferent d'un o l'altre estat de transició en l'espai confinat disponible dins dels porus del MOF. Les característiques energètiques del procés s'han analitzat mitjançant l'ús combinat d'estudis cinètics i càlculs teòrics. Finalment, en vista de les interessants propietats del MOF-808 com a catalitzador per a reaccions MPV, s'ha estès amb èxit l'ús d'aquest material a la preparació de composts hidroxiesteroids de difícil obtenció i d'interès farmacològic mitjançant la reducció quimio-, regio- i diastereoselectiva del corresponent oxoesteroid. D'aquesta manera, s'ha aconseguit obtenir en un únic pas de reacció i amb una elevada selectivitat els següents composts: 17alfa-estradiol, 5alfa-androstan-3beta,17alfa-diol i epitestosterona, el que demostra el potencial del MOF-808 com a catalitzador per a la síntesi de composts d'alt valor afegit., [EN] Various zirconium-containing MOF-808 compounds have been prepared as potential catalysts for the Meerwein-Ponndorf-Verley (MPV) reduction of carbonyl compounds. Modified MOF-808 have been synthethized in which a small fraction of the trimesate ligands present in pristine MOF-808 has been replaced by dicarboxylate ligands, as a strategy to induce a controlled creation of defects. The linkers used are: isophthalate (MOF-808-IPA), 3,5-pyridinedicarboxylate (MOF-808-Pydc), 5-aminoisophthalate (MOF-808-NH2) and 5-hydroxyisophthalate (MOF-808-OH). All these compounds are highly crystalline and isoreticular with pristine MOF-808. The catalytic activity of pristine and defect engineered MOF-808 has been evaluated for MPV reactions, using cyclohexanone as model substrate. All the materials show a higher catalytic activity than that of zirconium terephthalate UiO-66 used as reference. This higher activity is attributed to the higher amount of coordinatively unsaturated Zr4+ ions in MOF-808 than in UiO-66. Moreover, MOF- 808-IPA and MOF-808-Pydc are more active than pristine MOF-808, which is due to the creation of less sterically crowded sites due to the introduction of defective dicarboyxlate linkers. A further advantage of MOF-808 over UiO-66 is the presence of a wider pore system, which allows converting bulkier substrates. To evaluate this characteristic, a bulky ketone has been used; estrone, which can enter the pores of MOF-808 but not those of UiO-66. Accordingly, MOF-808 can fully convert estrone selectively to estradiol, while UiO-66 shows barely any catalytic activity. Interestingly, when MOF- 808 is used as catalysts, a noticeable amount of the isomer 17alpha-estradiol is produced, which is difficult to obtain by other means. Therefore, the diastereoselective properties of MOF-808 for MPV reactions are interesting from the preparative point of view. In order to investigate in more detail the diastereoselective properties of MOF-808 for MPV reactions, various substituted cyclohexanones have been considered: 3-methylcyclohexanone (3MeCH), 2- methylcyclohexanone (2MeCH) and 2-phenylcyclohexanone (2PhCH). Depending on the alcohol used as reducing agent and the position of the substituent in the cyclohexanone molecule, MOF-808 selectively favors the formation of one isomer or the other with a different diastereoselectivity: 82%, 61% and 94%, respectively for 3MeCH, 2MeCH y 2PhCH. These results can be rationalized by considering the preferential formation of a given transition state in the confined space available inside the MOF pores. The energetic characteristics of the process have been analyzed by a combined use of kinetic studies and theoretical calculations. Finally, in view of the interesting properties of MOF-808 as catalyst for MPV reactions, this material has been successfully applied to the preparation of a number of challenging hydroxysteroid compounds with pharmacologic interest through a chemo-, regio- and diastereoselective reduction of the corresponding oxosteroid. In this way, it has been possible to prepare in one single reaction step the following compounds: 17alpha-estradiol, 5alpha-androstan-3beta,17alpha-diol and epitestosterone. This demonstrates the high potential of MOF-808 as a catalysts for the synthesis of high added value compounds., I want to thank the European Union’s Horizon 2020 research and innovation program for a contract under the Marie Sklodowska-Curie grant agreement No. 641887 (Project acronym: DEFNET).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nature of active sites on UiO-66 and beneficial influence of water in the catalysis of Fischer esterification

  • Caratelli, Chiara
  • Hajek, J.
  • García Cirujano, Francisco
  • Warroquier, M.
  • Van Speybroeck, Veronique
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Zirconium terephthalate UiO-66 type metal organic frameworks (MOFs) are known to be highly active, stable and reusable catalysts for the esterification of carboxylic acids with alcohols. Moreover, when defects are present in the structure of these MOFs, coordinatively unsaturated Zr ions with Lewis acid properties are created, which increase the catalytic activity of the resulting defective solids. In the present work, molecular modeling techniques combined with new experimental data on various defective hydrated and dehydrated materials allow to unravel the nature and role of defective active sites in the Fischer esterification and the role of coordinated water molecules to provide additional Bronsted sites. Periodic models of UiO-66 and UiO-66-NH2 catalysts have been used to unravel the reaction mechanism on hydrated and dehydrated materials. Various adsorption modes of water and methanol are investigated. The proposed mechanisms are in line with experimental observations that amino groups yield a reduction in the reaction barriers, although they have a passive role in modulating the electronic structure of the material. Water has a beneficial role on the reaction cycle by providing extra Bronsted sites and by providing stabilization for various intermediates through hydrogen bonds. (C) 2017 The Authors. Published by Elsevier Inc., This work is supported by the Fund for Scientific Research Flanders (FWO) (project number 3G048612), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET). Funding was also received from the European Union's Horizon 2020 research and innovation programme [consolidator ERC grant agreement no. 647755-DYNPOR (2015-2020)]. Computational resources (Stevin Supercomputer Infrastructure) and services were provided by Ghent University. Financial support from the Generalitat Valenciana (project AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (program Severo Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (project MAT2014-52085-C2-1-P) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ruthenium Metal–Organic Frameworks with Different Defect Types: Influence on Porosity, Sorption, and Catalytic Properties

  • Zhang, Wenhua
  • Kauer, Max
  • Halbherr, Olesia
  • Epp, Konstantin
  • Guo, Penghu
  • Gonzalez, Miguel I.
  • Xiao, Dianne J.
  • Wiktor, Christian
  • Woell, Christof
  • Wang, Yuemin
  • Muhler, Martin
  • Fischer, Roland A.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
By employing the mixed-component, solid-solution approach, various functionalized ditopic isophthalate (ip) defect-generating linkers denoted 5-X-ipH(2), where X = OH (1), H (2), NH2 (3), Br (4), were introduced into the mixed-valent ruthenium analogue of [Cu-3(btc)(2)](n) (HKUST-1, btc = benzene-1,3,5-tricarboxylate) to yield Ru-DEMOFs (defect-engineered metal-organic frameworks) of the general empirical formula [Ru-3(btc)(2-x)(5-X-ip)(x)Y-y](n). Framework incorporation of 5-X-ip was confirmed by powder XRD, FTIR spectroscopy, ultrahigh-vacuum IR spectroscopy, thermogravimetric analysis, H-1 NMR spectroscopy, N-2 sorption, and X-ray absorption near edge structure. Interestingly, Ru-DEMOF 1c with 32% framework incorporation of 5-OH-ip shows the highest BET surface area (approximate to 1300 m(2) g(-1), N-2 adsorption, 77 K) among all materials (including the parent framework [Ru-3(btc)(2)Y-y](n)). The characterization data are consistent with two kinds of structural defects induced by framework incorporation of 5-X-ip: modified paddlewheel nodes featuring reduced ruthenium sites (Ru delta+, 0 < delta < 2, type A) and missing nodes leading to enhanced porosity (type B). Their relative abundances depend on the choice of the functional group X in the defect linkers. Defects A and B also appeared to play a key role in sorption of small molecules (i.e., CO2, CO, H-2) and the catalytic properties of the materials (i.e., ethylene dimerization and the Paal-Knorr reaction)., This research was partially supported by the DFG project FI-502/32-1. W.Z. is thankful for a PhD fellowship from the China Scholarship Council (CSC). W.Z. is also grateful to the Research School<SUP>Plus</SUP> at Ruhr-University Bochum for the support of her PhD project and funding of an internship at UC Berkeley at the group of Prof. Jeffrey. R. Long and collaboration with D.J.X. and M.I.G. including Douglas Reed for the collection of CO isotherms (298 K). W.Z. also thanks Dr. Raghavender Medishetty for the fruitful discussions. P.G. acknowledges the support of the EU innovative Training Network "DEFect NETwork materials science and engineering" (DEFNET). The authors further thank the team at DELTA synchrotron facility at the TU Dortmund for the support with the X-ray absorption spectroscopy experiments performed at beam lines BL8 and the PXRD data collection at beam lines BL9.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Aerobic Oxidation of Cumene to Cumene Hydroperoxide over Mono- and Bimetallic Trimesate Metal Organic Frameworks Prepared by a Facile Green Aqueous Synthesis

  • Nowacka, Anna Elzbieta
  • Briantais, P.
  • PRESTIPINO, CARMELO
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Co-Ni and Mn-Ni bimetallic trimesate MOFs prepared by a fast aqueous synthesis method are excellent and reusable catalysts for the selective aerobic oxidation of cumene to cumene hydroperoxide (CHP). Isolation of Co2+ (or Mn2+) in an inert Ni-BTC framework is a good strategy to optimize CHP selectivity above 90%: since only Co2+ sites catalyze CHP decomposition, a drop of the CHP selectivity is observed as the cobalt content in the bimetallic MOF increases. The statistical probability of having isolated Co2+ sites is calculated as a function of the total cobalt content of the bimetallic compound, assuming homogeneous distribution of Co2+ ions in the Ni-BTC framework and preferential occupation of terminal sites. Thus, in our best sample, with a Co:Ni ratio of 5:95, 73% of the total Co2+ ions are isolated so that CHP decomposition/overoxidation processes at the surface of the catalyst are not likely to occur before CHP desorption. This can explain the excellent CHP selectivity (91%) attained over this material. This "site isolation" effect is further supported by similar findings on Mn-Ni bimetallic compounds., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pd@UiO-66-Type MOFs Prepared by Chemical Vapor Infiltration as Shape-Selective Hydrogenation Catalysts

  • Luz Mínguez, Ignacio
  • Roesler, Christoph
  • Epp, Konstantin
  • Fischer, Roland A.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Host-guest inclusion properties of UiO-66 and UiO-67 metal-organic frameworks have been studied using ferrocene (FeCp2) as probe molecule. According to variable-temperature solid-state H-1 and C-13 CP-MAS-NMR, two different environments exist for adsorbed FeCp2 inside UiO-66 and UiO-67, which have been assigned to octahedral and tetrahedral cavities. At room temperature, a rapid exchange between these two adsorption sites occurs in UiO-67, while at -80 degrees C the intracrystalline traffic of FeCp2 through the triangular windows is largely hindered. In UiO-66, FeCp2 diffusion is already impeded at room temperature, in agreement with the smaller pore windows. Palladium nanoparticles (Pd NPs) encapsulated inside UiO-66 and UiO-67 have been prepared by chemical vapor infiltration of (allyl)Pd(Cp) followed by UV light irradiation. Infiltration must be carried out at low temperature (-10 degrees C) to avoid uncontrolled decomposition of the organometallic precursor and formation of Pd NPs at the external surface of the MOF. The resulting Pd-MOFs are shape selective catalysts, as shown for the hydrogenation of carbonyl compounds with different steric hindrance., Financial support from the Consolider-Ingenio 2010 (project MULTICAT), the Severo Ochoa program, and the Spanish Ministry of Science and Innovation (project MAT2011-29020-C02-01) is gratefully acknowledged. C. R. is grateful for a graduate student fellowship awarded by the Cluster of Excellence RESOLV (EXC 1069) funded by the German Deutsche Forschungsgemeinschaft (DFG). This project has further received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skolodowska-Curie grant agreement, number 641887.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Base free transfer hydrogenation using a covalent triazine framework based catalyst

  • Bavykina, Anastasiya
  • Mautschke, Hans-Hilmar
  • Makkee, Michiel
  • Kapteijn, Frederik
  • Gascon, Jorge
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Isomerisation of allylic alcohols to saturated ketones can be efficiently catalysed by a heterogeneous molecular system resulting from (IrCp)-Cp-III* anchoring to a covalent triazine framework. The obtained catalysts are active, selective, and fully recyclable., Financial support from the Generalitat Valenciana (projects Consolider-Ingenio MULTICAT and AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (MINECO) (program Severo Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (MICINN) (project MAT2014-52085-C2-1-P) are gratefully acknowledged. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 641887 (project acronym: DEFNET). Also, financial support from the European Union Seventh Framework Programme (FP7/2007-2013) under the grant agreement number 309701, project Eco2CO<INF>2</INF> is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Encapsulation of bimetallic metal nanoparticles into robust Zr-based metal-organic frameworks: Evaluation of the catalytic potential for size-selective hydrogenation

  • Rösler, Christoph
  • Dissegna, Stefano
  • López-Rechac, Víctor
  • Kauer, Max
  • Guo, Penghu
  • Turner, Stuart
  • Ollegot, Kevin
  • Kobayashi, Hirokazu
  • Yamamoto, Tomokazu
  • Peeters, Daniel
  • Wang, Yuemin
  • Matsumura, Syo
  • Van Tendeloo, Gustaaf
  • Kitagawa, Hiroshi
  • Muhler, Martin
  • Fischer, Roland A.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] The realization of metal nanoparticles (NPs) with bimetallic character and distinct composition for specific catalytic applications is an intensively studied field. Due to the synergy between metals, most bimetallic particles exhibit unique properties that are hardly provided by the individual monometallic counterparts. However, as small-sized NPs possess high surface energy, agglomeration during catalytic reactions is favored. Sufficient stabilization can be achieved by confinement of NPs in porous support materials. In this sense, metal organic frameworks (MOFs) in particular have gained a lot of attention during the last years; however, encapsulation of bimetallic species remains challenging. Herein, the exclusive embedding of preformed core shell PdPt and RuPt NPs into chemically robust Zr-based MOFs is presented. Microstructural characterization manifests partial retention of the core shell systems after successful encapsulation without harming the crystallinity of the microporous support. The resulting chemically robust NP@UiO-66 materials exhibit enhanced catalytic activity towards the liquid-phase hydrogenation of nitrobenzene, competitive with commercially used Pt on activated carbon, but with superior size-selectivity for sterically varied substrates., This work is supported by the Cluster of Excellence RESOLV (EXC 1069) funded by the Deutsche Forschungsgemeinschaft (DFG).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diastereoselective Synthesis of Pyranoquinolines on Zirconium-Containing UiO-66 Metal-Organic Frameworks

  • López-Rechac, Víctor
  • García Cirujano, Francisco
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] The Zr terephthalate MOFs UiO-66 and UiO-66-NH2 have been found to be highly diastereoselective catalysts for the synthesis of a pyrano[3,2-c]quinoline through an inverse electron -demand aza-Diels-Alder [4+2] cycloaddition of an aryl Qmine (formed in situ from aniline and benzaldehyde) and 3,4-dihydro-2H-pyran in one pot, affording the corresponding trans isomer in diastereomeric excesses of 90-95 %. The solids are stable under the reaction conditions and can be reused at least three times without significant loss of activity or diastereoselectivity., Financial support from the Generalitat Valenciana (projects Consolider-Ingenio MULTICAT and AICO/2015/065), the Spanish Ministry of Economy and Competitiveness (MINECO) (program Severn Ochoa SEV20120267), and the Spanish Ministry of Science and Innovation (MICINN) (project MAT2014-52085-C2-1-P) is gratefully acknowledged. V. L. R. thanks the Fundacion "La Caixa" for a "La Caixa-Severo Ochoa" Ph. D. Scholarship. This project received funding from the European Union's Horizon 2020 Tesearch and Innovation Programme under the Marie Skolodowska Curie grant agreement number 641887.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Facile &quot, Green&quot, Aqueous Synthesis of Mono- and Bimetallic Trimesate Metal-Organic Frameworks

  • Nowacka, Anna Elzbieta
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Various isoreticular monometallic (Co2+, Ni2+, Cu2+, and Zn2+) and bimetallic (Co-Ni, Co-Zn, Mn-Ni) trimesate MOFs have been prepared by a fast (10 min) and green synthesis method from aqueous solutions, at room temperature and ambient pressure. A combined XRD and SEM/EDX analysis clearly revealed bimetallic compounds form true solid solutions rather than a simple physical mixture of pure-phase monometallic compounds. Moreover, a detailed evaluation of the evolution of cell parameters with the composition provides strong evidence indicating a preferential occupation of one crystallographic position (bidentate terminal sites) by Co2+ (or Mn2+) ions. This leads to a precise and predictable array of metal ions in the framework, which can be finely tuned by changing the overall composition of the bimetallic MOF. Implications are envisaged in the design and catalytic properties of well-defined single-site catalysts., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for the electron microscopy measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt(II) Bipyrazolate Metal-Organic Frameworks as Heterogeneous Catalysts in Cumene Aerobic Oxidation: A Tag-Dependent Selectivity

  • Nowacka, Anna Elzbieta
  • Vismara, R.
  • Mercuri, G.
  • Moroni, M.
  • Domasevitch, K.
  • di Nicola, C.
  • Pettinari, C.
  • Giambastiani, G.
  • Galli, S.
  • Rossin, A.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Three metal-organic frameworks with the general formula Co(BPZX) (BPZX(2-) = 3-X-4,4'-bipyrazolate, X = H, NH2, NO2) constructed with ligands having different functional groups on the same skeleton have been employed as heterogeneous catalysts for aerobic liquid-phase oxidation of cumene with O-2 as oxidant. O-2 adsorption isotherms collected at p(O2) = 1 atm and T = 195 and 273 K have cast light on the relative affinity of these catalysts for dioxygen. The highest gas uptake at 195 K is found for Co(BPZ) (3.2 mmol/g (10.1 wt % O-2)), in line with its highest BET specific surface area (926 m(2)/g) in comparison with those of Co(BPZNH(2)) (317 m(2)/g) and Co(BPZNO(2)) (645 m(2)/g). The O-2 isosteric heat of adsorption (Q(2)) trend follows the order Co(BPZ) > Co(BPZNH(2)) > Co(BPZNO(2)). Interestingly, the selectivity in the cumene oxidation products was found to be dependent on the tag present in the catalyst linker: while cumene hydroperoxide (CHP) is the main product obtained with Co(BPZ) (84% selectivity to CHP after 7 h, p(O2) = 4 bar, and T = 363 K), further oxidation to 2-phenyl-2-propanol (PP) is observed in the presence of Co(BPZNH(2)) as the catalyst (69% selectivity to PP under the same experimental conditions)., S.G., R.V., and M.M. acknowledge Universita dell'Insubria for partial funding. G.G. thanks the Italian MIUR through the PRIN 2017 Project Multi-e: Multielectron Transfer for the Conversion of Small Molecules: an Enabling Technology for the Chemical Use of Renewable Energy (20179337R7) for financial support. G.G. thanks the TRAINER project (Catalysts for Transition to Renewable Energy Future) ref. ANR-17-MPGA-0017 for support. C.P. thanks the University of Camerino and the Italian MIUR throughout the PRIN 2015 Project Towards a Sustainable Chemistry (20154 x 9ATP_002). This project has also received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). Professor Norberto Masciocchi (University of Insubria, Como, Italy) is acknowledged for fruitful discussions. The authors are also grateful to Dr. Giulia Tuci (CNR-ICCOM Florence, Italy) for help with the XPS curve fitting. The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Anion Exchange and Catalytic Functionalization of the Zirconium-Based Metal-Organic Framework DUT-67

  • Drache, Franziska
  • García Cirujano, Francisco
  • Nguyen, Khoa D.
  • Bon, Volodymyr
  • Senkovska, Irena
  • Kaskel, Stefan
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] A postsynthetic treatment with diluted solutions of the inorganic HCl or H2SO4 acids was applied to functionalize the eight connected Zr-based metal-organic framework DUT-67 (DUT = Dresden University of Technology). During the treatment, it is possible to remove and exchange the pristine modulator (formate) by Cl(-)or SO(4)(2-)anions. The position of the chlorine in the crystal structure of DUT-67 after HCl treatment could be determined by single-crystal X-ray diffraction analysis. Moreover, by means of the acidic treatment the polarity of the network as well as its Bronsted acid strength are increased, which have a crucial impact on the catalytic performance. The improved catalytic activity of the acid-treated materials was demonstrated in the esterification of levulinic acid with ethanol., This project received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant No. 641887 (project acronym: DEFNET). The Spanish Ministry of Economy and Competitiveness (program "Severo Ochoa"), the Spanish Ministry of Science and Innovation (Project No. MAT2014-52085-C2-1-P), and the German Research Foundation (Project No. KA 1698/19-1) are also acknowledged for financial support.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Multifunctionality of weak ferromagnetic porphyrin-based MOF: selective adsorption in liquid and gas phase

  • Amayuelas López, Eder
  • Iacomi, Paul
  • Fidalgo Marijuán, Arkaitz
  • Bazán Blau, Begoña del Pilar
  • Urtiaga Greaves, Miren Karmele
  • Barandika Argoitia, Miren Gotzone
  • Lezama Diago, Luis María
  • Llewellyn, Philip
  • Arriortua Marcaida, María Isabel
Metal-organic Frameworks (MOFs) are one of the hot topics in materials science and technology due to their potential applications in many fields, such as heterogeneous catalysis, biomedicine for drug delivery or as sensors, among others. At the environmental level, they represent a great alternative in industry for the management of pollutants, such as the storage and separation of gases and the selective adsorption of pollutants in aqueous solution. The large variety of porous structures of MOF materials results from the combination of metal ions or clusters and organic linkers of different nature. Among these organic linkers, porphyrins are developing great interest in this field because of the natural functions they perform and their stability. In this context, the compound MPF@Ei2-3, [Ni5(H2TCPP)2O(H2O)4]·nS (where H6TCPP is meso-tetra(4-carboxyphenyl)porphyrin and S is the solvent) is presented in this work, where is studied its thermal and magnetic properties and proved as adsorbent of pollutants in liquid and gas phase. Adsorption of organic dyes in solution and adsorption of gases and calorimetry measurements were performed, as well as a study of the selectivity in gas mixtures confirming its multifunctionality due to its structure dependent properties., This work has been financially supported by the ‘‘Ministerio de Economia, Industria y Competitividad” (MAT2016-42092-R), the ‘‘Gobierno Vasco’’ (Basque University System Research Groups, IT-1290-19) and the University of the Basque Country (GIU18/197which are gratefully acknowledge. The technical and human support provided by SGIker (UPV/EHU) is gratefully acknowledged. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 641887 (project acronym: DEFNET).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metal–organic and covalent organic frameworks as single-site catalysts

  • Rogge, Sven M.J.
  • Bavykina, Anastasiya
  • Hajek, Julianna
  • Garcia, Hermenegildo
  • Olivos-Suarez, Alma I.
  • Sepúlveda-Escribano, Antonio
  • Vimont, Alexandre
  • Clet, Guillaume
  • Bazin, Philippe
  • Kapteijn, Freek
  • Daturi, Marco
  • Ramos-Fernández, Enrique V.
  • Llabrés i Xamena, Francesc X.
  • Van Speybroeck, Veronique
  • Gascon, Jorge
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective Aerobic Oxidation of Cumene to Cumene Hydroperoxide over Mono- and Bimetallic Trimesate Metal–Organic Frameworks Prepared by a Facile “Green” Aqueous Synthesis

  • Nowacka, Anna
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc X.
Co–Ni and Mn–Ni bimetallic trimesate MOFs prepared by a fast aqueous synthesis method are excellent and reusable catalysts for the selective aerobic oxidation of cumene to cumene hydroperoxide (CHP). Isolation of Co2+ (or Mn2+) in an inert Ni-BTC framework is a good strategy to optimize CHP selectivity above 90%: since only Co2+ sites catalyze CHP decomposition, a drop of the CHP selectivity is observed as the cobalt content in the bimetallic MOF increases. The statistical probability of having isolated Co2+ sites is calculated as a function of the total cobalt content of the bimetallic compound, assuming homogeneous distribution of Co2+ ions in the Ni-BTC framework and preferential occupation of terminal sites. Thus, in our best sample, with a Co:Ni ratio of 5:95, 73% of the total Co2+ ions are isolated so that CHP decomposition/overoxidation processes at the surface of the catalyst are not likely to occur before CHP desorption. This can explain the excellent CHP selectivity (91%) attained over this material. This “site isolation” effect is further supported by similar findings on Mn–Ni bimetallic compounds., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile >green> Aqueous Synthesis of Mono- And Bimetallic Trimesate Metal-Organic Frameworks

  • Nowacka, Anna
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc X.
Various isoreticular monometallic (Co, Ni, Cu, and Zn) and bimetallic (Co-Ni, Co-Zn, Mn-Ni) trimesate MOFs have been prepared by a fast (10 min) and green synthesis method from aqueous solutions, at room temperature and ambient pressure. A combined XRD and SEM/EDX analysis clearly revealed bimetallic compounds form true solid solutions rather than a simple physical mixture of pure-phase monometallic compounds. Moreover, a detailed evaluation of the evolution of cell parameters with the composition provides strong evidence indicating a preferential occupation of one crystallographic position (bidentate terminal sites) by Co (or Mn) ions. This leads to a precise and predictable array of metal ions in the framework, which can be finely tuned by changing the overall composition of the bimetallic MOF. Implications are envisaged in the design and catalytic properties of well-defined single-site catalysts., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt(II) Bipyrazolate Metal-Organic Frameworks as Heterogeneous Catalysts in Cumene Aerobic Oxidation: A Tag-Dependent Selectivity

  • Nowacka, Anna
  • Vismara, R.
  • Mercuri, G
  • Moroni, M.
  • Palomino, Miguel
  • Domasevitch, K.V.
  • Di Nicola, C.
  • Pettinari, Claudio
  • Giambastiani, Giuliano
  • Llabrés i Xamena, Francesc X.
  • Galli, Simona
  • Rossin, Andrea
Three metal-organic frameworks with the general formula Co(BPZX) (BPZX = 3-X-4,4′-bipyrazolate, X = H, NH, NO) constructed with ligands having different functional groups on the same skeleton have been employed as heterogeneous catalysts for aerobic liquid-phase oxidation of cumene with O as oxidant. O adsorption isotherms collected at p = 1 atm and T = 195 and 273 K have cast light on the relative affinity of these catalysts for dioxygen. The highest gas uptake at 195 K is found for Co(BPZ) (3.2 mmol/g (10.1 wt % O)), in line with its highest BET specific surface area (926 m/g) in comparison with those of Co(BPZNH) (317 m/g) and Co(BPZNO) (645 m/g). The O isosteric heat of adsorption (Q) trend follows the order Co(BPZ) > Co(BPZNH) > Co(BPZNO). Interestingly, the selectivity in the cumene oxidation products was found to be dependent on the tag present in the catalyst linker: While cumene hydroperoxide (CHP) is the main product obtained with Co(BPZ) (84% selectivity to CHP after 7 h, p = 4 bar, and T = 363 K), further oxidation to 2-phenyl-2-propanol (PP) is observed in the presence of Co(BPZNH) as the catalyst (69% selectivity to PP under the same experimental conditions)., S.G., R.V., and M.M. acknowledge Università dell’Insubria for partial funding. G.G. thanks the Italian MIUR through the PRIN 2017 Project Multi-e: Multielectron Transfer for the Conversion of Small Molecules: an Enabling Technology for the Chemical Use of Renewable Energy (20179337R7) for financial support. G.G. thanks the TRAINER project (Catalysts for Transition to Renewable Energy Future) ref. ANR-17-MPGA-0017 for support. C.P. thanks the University of Camerino and the Italian MIUR throughout the PRIN 2015 Project Towards a Sustainable Chemistry (20154 × 9ATP_002). This project has also received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). Professor Norberto Masciocchi (University of Insubria, Como, Italy) is acknowledged for fruitful discussions. The authors are also grateful to Dr. Giulia Tuci (CNR-ICCOM Florence, Italy) for help with the XPS curve fitting. The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.