Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

High performance mixed matrix membranes (MMMs) composed of ZIF-94 filler and 6FDA-DAM polymer

  • Etxeberria-Benavides, Miren
  • David, Oana
  • Johnson, Timothy
  • Łozińska, Magdalena M.
  • Orsi, Angelica
  • Wright, Paul A.
  • Mastel, Stefan
  • Hillenbrand, Rainer
  • Kapteijn, Freek
  • Gascon, Jorge
Carbon capture and storage (CCS) using membranes for the separation of CO2 holds great promise for the reduction of atmospheric CO2 emissions from fuel combustion and industrial processes. Among the different process outlines, post-combustion CO2 capture could be easily implemented in existing power plants. However, for this technology to become viable, new membrane materials have to be developed. In this article we present the development of high performance mixed matrix membranes (MMMs) composed of ZIF-94 filler and 6FDADAM polymer matrix. The CO2/N2 separation performance was evaluated by mixed gas tests (15CO2:85N2) at 25 °C and 1–4 bar transmembrane pressure difference. The CO2 membrane permeability was increased by the addition of the ZIF-94 particles, maintaining a constant CO2/N2 selectivity of ~22. The largest increase in CO2 permeability of ~ 200% was observed for 40 wt% ZIF-94 loading, reaching the highest permeability (2310 Barrer) at similar selectivity among 6FDA-DAM MMMs reported in literature. For the first time, the ZIF-94 metal organic framework crystals with particle size smaller than 500 nm were synthesized using nonhazardous solvent (tetrahydrofuran and methanol) instead of dimethylformamide (DMF) in a scalable process. Membranes were characterized by three non-invasive image techniques, i.e. SEM, AFM and nanoscale infrared imaging by scattering-type scanning near-field optical microscopy (s-SNOM). The combination of these techniques demonstrates a very good dispersion and interaction of the filler in the polymer layer, even at very high loadings.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-organic and covalent organic frameworks as single-site catalysts

  • Rogge, S. M. J.
  • Bavykina, Anastasiya
  • Hajek, J.
  • Olivos-Suarez, A. I.
  • Sepulveda-Escribano, A.
  • Vimont, A.
  • Clet, G.
  • Bazin, P.
  • Kapteijn, Freek
  • Daturi, M.
  • Ramos-Fernandez, Enrique V.
  • Van Speybroeck, Veronique
  • Gascon, Jorge
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Heterogeneous single-site catalysts consist of isolated, well-defined, active sites that are spatially separated in a given solid and, ideally, structurally identical. In this review, the potential of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) as platforms for the development of heterogeneous single-site catalysts is reviewed thoroughly. In the first part of this article, synthetic strategies and progress in the implementation of such sites in these two classes of materials are discussed. Because these solids are excellent playgrounds to allow a better understanding of catalytic functions, we highlight the most important recent advances in the modelling and spectroscopic characterization of single-site catalysts based on these materials. Finally, we discuss the potential of MOFs as materials in which several single-site catalytic functions can be combined within one framework along with their potential as powerful enzyme-mimicking materials. The review is wrapped up with our personal vision on future research directions., S. M. J. Rogge, J. Hajek, and V. Van Speybroeck acknowledge the Fund for Scientific Research - Flanders (FWO), the Research Board of Ghent University (BOF) and BELSPO in the frame of IAP/7/05 for financial support. V. Van Speybroeck acknowledges funding from the European Union's Horizon 2020 research and innovation programme (consolidator ERC grant agreement no. 647755 - DYNPOR (2015-2020)). This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 641887 (project acronym: DEFNET). W. Dewitte and C. Caratelli are acknowledged for technical support with the figures. J. Gascon acknowledges funding from the European Union's 2020 research and innovation programme (ERC grant agreement no. 335746 - CrystEng-MOF-MMM) and from the Dutch Organization for Scientific Research (NWO, VIDI grant agreement 723.012.107 - MetMOFCat).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The MOF-driven synthesis of supported palladium clusters with catalytic activity for carbene-mediated chemistry

  • Fortea Perez, Francisco
  • Ferrando-Soria, Jesus
  • Manuel -Herrera, Juan
  • Osadchii, Dmitrii
  • Gascon, Jorge
  • Armentano, Donatella
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The development of catalysts able to assist industrially important chemical processes is a topic of high importance. In view of the catalytic capabilities of small metal clusters, research efforts are being focused on the synthesis of novel catalysts bearing such active sites. Here we report a heterogeneous catalyst consisting of Pd4 clusters with mixed-valence 0/+1 oxidation states, stabilized and homogeneously organized within the walls of a metal¿organic framework (MOF). The resulting solid catalyst outperforms state-of-the-art metal catalysts in carbene-mediated reactions of diazoacetates, with high yields (>90%) and turnover numbers (up to 100,000). In addition, the MOF-supported Pd4 clusters retain their catalytic activity in repeated batch and flow reactions (>20 cycles). Our findings demonstrate how this synthetic approach may now instruct the future design of heterogeneous catalysts with advantageous reaction capabilities for other important processes., This work was supported by the MINECO (Spain) (Projects CTQ2013-46362-P, CTQ2014-56312-P and Excellence Units 'Severo Ochoa' and 'Maria de Maeztu' SEV-2012-0267 and MDM-2015-0538), the Generalitat Valenciana (Spain) (Project PROMETEOII/2014/070), the Ministero dell'Istruzione, dell'Universita e della Ricerca (Italy) and the Junta de Andalucia (FQM-195 and P11-FQM-7756). M. M. thanks the MINECO for a predoctoral contract. Thanks are also extended to the Ramon y Cajal Program and the 'Convocatoria 2015 de Ayudas Fundacion BBVA a Investigadores y Creadores Culturales' (E.P., A.L.-P. and J.F.-S.). J.G. acknowledge the financial support of the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 335746, CrystEng-MOF-MMM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal organic framework nanosheets in polymer composite materials for gas separation

  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Luz Mínguez, Ignacio
  • Seoane, Beatriz
  • Miro, Hozanna
  • Kapteijn, Freek
  • Gascon, Jorge
[EN] Composites incorporating two-dimensional nanostructures within polymeric matrices have potential as functional components for several technologies, including gas separation. Prospectively, employing metal-organic frameworks (MOFs) as versatile nanofillers would notably broaden the scope of functionalities. However, synthesizing MOFs in the form of freestanding nanosheets has proved challenging. We present a bottom-up synthesis strategy for dispersible copper 1,4-benzenedicarboxylate MOF lamellae of micrometre lateral dimensions and nanometre thickness. Incorporating MOF nanosheets into polymer matrices endows the resultant composites with outstanding CO2 separation performance from CO2/CH4 gas mixtures, together with an unusual and highly desired increase in the separation selectivity with pressure. As revealed by tomographic focused ion beam scanning electron microscopy, the unique separation behaviour stems from a superior occupation of the membrane cross-section by the MOF nanosheets as compared with isotropic crystals, which improves the efficiency of molecular discrimination and eliminates unselective permeation pathways. This approach opens the door to ultrathin MOF-polymer composites for various applications., The research leading to these results has received funding (J.G., B.S.) from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement no. 335746, CrystEng-MOF-MMM. T.R. is grateful to TUDelft for funding. G.P. acknowledges the A. von Humboldt Foundation for a research grant. A.C., I.L. and F.X.L.i.X. thank Consolider-Ingenio 2010 (project MULTICAT) and the ‘Severo Ochoa’ programme for support. I.L. also thanks CSIC for a JAE doctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Anchoring of Diphenylphosphinyl Groups to NH2-MIL-53 by Post-Synthetic Modification

  • Castellanos, Sonia
  • Sai Sankar Gupta, Karthick Babu
  • Pustovarenko, Alexey
  • Dikhtiarenko, Alla
  • Nasalevich, Maxim
  • Gascon, Jorge
  • Kapteijn, Freek
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Incorporation of new functionalities into metal-organic frameworks (MOFs) by post-synthetic modification is a most attractive strategy for attaining the desired properties without risking destruction of the crystalline structure chosen for the aimed application. In this work the amine group in NH2-MIL-53(Al) was used as anchoring point for the diphenylphosphinyl (Ph2PO-) moiety. The success of the derivatization was confirmed by P-31 MAS NMR and DRIFT spectroscopic studies. A newly synthesized reference linker bearing the same phosphinic amide functional group was used to assist in the MOF characterization. The introduction of the bulky diphenylphosphinyl group stabilizes the large-pore form of the MOF and leads to changes in the optical properties as a consequence of the electronic influence of the PO group. The approach described here is relevant for the preparation of novel phosphorus-containing MOFs., A. P., A. D., and J. G. have received funding from the European Research Council under the Seventh Framework Programme of the European Union (FP/2007-2013/ERC) Grant Agreement no. 335746, CrystEng-MOF-MMM.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Tuning the selectivity of light hydrocarbons in natural gas in a family of isoreticular MOFs

  • Grancha, Thais
  • Mon, Marta
  • Ferrando-Soria, Jesús
  • Gascon, Jorge
  • Seoane, Beatriz
  • Ramos-Fernández, Enrique V.
  • Armentano, Donatella
  • Pardo, Emilio
  • Ramos-Fernández, Enrique V.|||/items/bfb4ad7a-ea42-4779-b123-a12caf1ae2d1
Purification of methane from other light hydrocarbons in natural gas is a topic of intense research due to its fundamental importance in the utilization of natural gas fields. Porous materials have emerged as excellent alternative platforms to conventional cryogenic methodologies to perform this task in a cost- and energy-efficient manner. Here we report a new family of isoreticular chiral MOFs, prepared from oxamidato ligands derived from natural amino acids L-alanine, L-valine and L-leucine, where, by increasing the length of the alkyl residue of the amino acid, the charge density of the MOF's channels can be tuned (1 > 2 > 3), decreasing the adsorption preference towards methane over light hydrocarbons thus improving this purification process. The validity of our rational design strategy has been proved by a combination of single-component adsorption isotherms, adsorption kinetics of CH4, C2H6, C3H8 and n-C4H10, and breakthrough experiments of binary CH4/C2H6 and CH4/C3H8 mixtures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure of 2,2'-diamino-[1,1'-biphenyl]-4,4'-dicarboxylic acid dihydrate, C14H16N2O6

  • Dikhtiarenko, Alla
  • Olivos Suarez, Alma I.
  • Pustovarenko, Alexey
  • García-Granda, Santiago
  • Gascón, Jorge
C14H16N2O6, triclinic, P1̅ (no. 2), a = 10.0254(5) Å, b = 11.2726(6) Å, c = 13.4494(7) Å, α = 111.535(2)°, β = 92.068(2)°, γ = 102.644(2)°, V = 1368.16(13) Å3, Z = 4, Rgt(F) = 0.047, wRref(F2) = 0.133, T = 150 K., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007–2013) / ERC Grant Agreement No.335746, CrystEngMOF-MMM. S. G.-G. thanks to Ministerio de Economía y Competitividad, MAT2013-40950-R, for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-dependent supramolecular isomerism of lutetium-aminoterephthalate metal-organic frameworks: synthesis, crystallography, and physical properties

  • Dikhtiarenko, Alla
  • Serra-Crespo, Pablo
  • Castellanos, Sonia
  • Pustovarenko, Alexey
  • Mendoza-Meroño, Rafael
  • García-Granda, Santiago
  • Gascón, Jorge
Three supramolecular isomers of lutetium metal-organic framework, {Lu2(H2O)4(ATA)3·4H2O}n (Lu-ATA@RT), {Lu2(H2O)2(C3H7NO)2(ATA)3}n (Lu-ATA@100), and {Lu2(C3H7NO)(ATA)3}n (Lu-ATA@150), have been obtained from the reaction of Lu(NO3)3·6H2O with 2-aminoterephthalic acid (ATA) at different temperatures. The resulting structures of Lu-ATA metal-organic frameworks depend on the temperature applied during the synthesis, revealing a temperature-susceptible supramolecular isomerism. Single-crystal X-ray diffraction analyses suggest that new compounds with formula {Lu2(S)x(ATA)3}n (S = solvent: H2O, DMF) display different three-dimensional architectures which consist of dinuclear lutetium building units. The supramolecular isomer Lu-ATA@RT, formed at room temperature, has a pcu-net topology, while its double interpenetrated analogue Lu-ATA@100 assembles at 100 °C under hydrothermal conditions. Hydrothermal synthesis at 150 °C affords formation of the dense Lu-ATA@150 cage-like framework displaying a new hexagonal-packed net topology. All Lu-ATA isomeric phases are porous and display different gas-uptake behavior toward carbon dioxide as a function of polymeric network arrangement. The luminescent properties of Lu-ATA frameworks in the solid state as well as in suspension in the presence of different solvents reveal a solvent-dependent emission., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007−2013)/ERC Grant Agreement n. 335746, CrystEng-MOF-MMM., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of ZIF-8 particle size in the performance of polybenzimidazole mixed matrix membranes for pre-combustion CO2 capture and its validation through interlaboratory test

  • Sánchez-Laínez, Javier
  • Zornoza, Beatriz
  • Cao, Shuai
  • Sabetghadam, Anahid
  • Seoane, Beatriz
  • Gascón, Jorge
  • Kapteijn, Freek
  • Téllez, Carlos
  • Coronas, Joaquín
J. Sánchez-Laínez et al., The preparation and performance of mixed matrix membranes (MMMs) based on polybenzimidazole (PBI) and ZIF-8 nanoparticles of different average sizes (50, 70 and 150 nm) as filler are reported. MMMs containing 10 and 20 wt% of ZIF-8 were tested for H2/CO2 separation (pre-combustion CO2 capture) at 150 °C and feed pressures from 3 to 6 bar. The addition of ZIF-8 resulted in a clear improvement in membrane performance. Embedding 20 wt% of ZIF-8 resulted in a H2 permeability increase of six times and the H2/CO2 selectivity increased nearly by 55% compared to the bare PBI polymer membrane. Both permeability and selectivity improved as the filler size increased, due to the lower degree of agglomeration of the largest particles, that may be less active owing to their smaller external surface area. MMMs synthesized using dry 150 nm ZIF-8 filler showed a better performance than those containing wet filler. Apart from agglomeration concerns favoring wet filler handling as evidenced by infrared characterization, the MMM preparation with wet filler is simpler than with dry filler. Finally, the reproducibility of the membranes was confirmed by a European interlaboratory Round Robin test involving three different institutions., Financial support from the Spanish MINECO (MAT2013-40556-R), the Aragón Government (T05) and the ESF is gratefully acknowledged. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under Grant Agreement no. 608490, project M4CO2. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA). The use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) is acknowledged. J.G. and B.S. gratefully acknowledge financial support from the European Research Council under the European Union's Seventh Framework Programme (FP/2007–2013) /ERC Grant Agreement no. 335746, CrystEng-MOF-MMM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic framework based mixed matrix membranes: A solution for highly efficient CO2 capture?

  • Seoane, Beatriz
  • Coronas, Joaquín
  • Gascón, Ignacio
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Caro, Jürgen
  • Kapteijn, Freek
  • Gascón, Jorge
The field of metal-organic framework based mixed matrix membranes (M(4)s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M(4)s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M(4) hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement no. 608490, project M4CO2 and (FP/2007–2013)/ERC Grant Agreement no. 335746, CrystEng-MOF-MMM (J. Gascon)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal organic framework synthesis in the presence of surfactants: Towards hierarchical MOFs?

  • Seoane, Beatriz
  • Dikhtiarenko, A.
  • Mayoral, Álvaro
  • Téllez, Carlos
  • Coronas, Joaquín
  • Kapteijn, Freek
  • Gascón, Jorge
The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfactant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower temperatures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H2O and EtOH with a H2O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non-ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology., The authors acknowledge financial support from the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013)/ERC grant agreement no. 335746, CrystEng-MOF-MMM. The authors from the University of Zaragoza thank the Spanish Ministry of Economy and Competitiveness (MINECO) for financial support through the project MAT2013-40556-R., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Metal Organic Framework synthesis in the presence of surfactants: towards hierarchical MOFs?

  • Seoane, Beatriz
  • Dikhtiarenko, Alla
  • Mayoral, Alvaro
  • Tellez, Carlos
  • Coronas, Joaquin
  • Kapteijn, Freek
  • Gascon, Jorge
The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfac- tant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower tem- peratures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H2O and EtOH with a H2O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non- ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology.17
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Crystal structure of 2,2'-diamino-= 1,1'-biphenyl-4,4'-dicarboxylic acid dihydrate, C14H16N2O6

  • Dikhtiarenko, Alla
  • Olivos Suárez, A. I.
  • Pustovarenko, Alexey
  • García-Granda, Santiago|||0000-0002-2373-0247
  • Gascón, J.
The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP/2007–2013) / ERC Grant Agreement No.335746, CrystEng-MOF-MMM. S. G.-G. thanks to Ministerio de Economía y Competitividad, MAT2013-40950-R, for financial support.