Pasar al contenido principal

INNOVACIONES EN MOFS PARA APLICACIONES ENERGETICA Y AMBIENTALMENTE EFICIENTES: NANOFILTRACION Y CATALISIS EN BIORREFINERIAS

MAT2013-40556-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performance MIL-101(Cr)@6FDA-mPD and MOF-199@6FDA-mPD mixed-matrix membranes for CO2/CH4 separation

  • Nuhnen, Alexander
  • Klopotowski, Maximilian
  • Tanh Jeazet, Harold B.
  • Sorribas, Sara
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
  • Janiak, Christoph
Combination of the polyimide 6FDA-mPD (6FDA = 4,4′-hexafluoroisopropylidene diphthalic anhydride and mPD = m-phenylenediamine) and crystallites of the metal–organic frameworks (MOFs) MIL-101(Cr) or MOF-199 (HKUST-1, Cu-BTC) produces mixed-matrix membranes (MMMs) with excellent dispersion and compatibility of the MOF particles within the polymer matrix. Permeation tests of a binary CO2/CH4 (50/50) gas mixture showed a remarkable increase of CO2 permeabilities for MIL-101(Cr)@6FDA-mPD and significantly higher selectivities for MOF-199@6FDA-mPD. The CO2 permeability increased from 10 (neat polymer) to 50 Barrer for the 24 wt% MIL-101(Cr)@6FDA-mPD membrane (with essentially constant selectivity) due to the high pore volume of MIL-101(Cr). The CO2/CH4 selectivity increased from 54 to 89 from the neat 6FDA-mPD polymer to the 24 wt% MOF-199@6FDA-mPD membrane, apparently due to the high CO2 adsorption capacity of MOF-199., Financial support (MAT2013-40556-R) from the Ministry of Economy and Competitiveness (MINECO) is gratefully acknowledged by JC. The work of CJ was supported by the Federal German Ministry of Education and Research (BMBF) under grant Optimat 03SF0492C., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new zeolitic hydroxymethylimidazolate material and its use in mixed matrix membranes based on 6FDA-DAM for gas separation

  • Perea-Cachero, Adelaida
  • Sánchez-Laínez, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The new ZIF named UZAR-S13 is formed by Zn2+ and 4(5)-(hydroxymethyl)imidazolate. UZAR-S13 has two distinct phases according to SEM and XRD: amorphous spheres and sheet crystals. UZAR-S13 and byproducts, with no N2 adsorption, rendered a notable CO2 uptake (up to 3.8 mmol g−1 at 30 bar and 0 °C), approaching values of known ZIFs. The most promising materials were included as fillers in mixed matrix membranes based on copolyimide 6FDA-DAM to study the separation of CO2/CH4, CO2/N2, H2/CO2 and H2/CH4 mixtures. The pore blocking hindered the gas flow of bulky molecules (CH4, N2 and CO2). The high CO2 adsorption on sheet crystals also contributed to the decrease in the permeability of CH4, N2 and CO2, giving poor selectivities. In contrast, the MMMs improved both the H2/CH4 selectivity (8.9–12.7 vs. 7.2) and permeability of H2 (544–597 vs. 505 Barrer) of the bare 6FDA-DAM membrane. This emphasizes the potential application of the fillers in the separation by molecular sieving of gas mixtures without CO2., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER (MAT2013-40556-R, MAT2016-77290-R (MINECO/FEDER) and CTQ2015-66080-R (MINECO/FEDER)), the European Social Fund (ESF) and the Aragón Government (DGA, T05) is gratefully acknowledged. A. P.-C. and J. S.-L. also thank the DGA and Spanish Education Ministry Program FPU2014, respectively, for Ph.D. grants. The microscopy work was carried out in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA, Universidad de Zaragoza). The authors would like to acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemocatalysis of sugars to produce lactic acid derivatives on zeolitic imidazolate frameworks

  • Murillo, Beatriz
  • Zornoza, Beatriz
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
Several research studies related to biorefining have focused on developing routes for biomass conversion into biomaterials or platform molecules. In this work, the zeolitic imidazolate frameworks (ZIFs) ZIF-8 and ZIF-67 have been tested as catalysts in the conversion of sugars (sucrose, glucose and fructose) into methyl lactate. ZIF-8 and ZIF-67 have the same sodalite type zeolite structure but behaved differently in the sugar conversion in methanol due to the respective presence of Zn and Co in their structures. ZIF-8 has been found to be the most active for the conversion of sugars into methyl lactate (yield 42%) and was reused in four catalytic cycles. The chemical and physical effects caused by these cycles on the catalysts have been studied by several techniques (X-ray diffraction, thermogravimetric analyses, infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electronic microscopy and nitrogen adsorption)., Financial support from the Spanish Ministry of Economy and Competitiveness (MAT2013-40556-R) and the European Social Fund (ESF) through the Aragón Government (DGA, T05) is gratefully acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragon – Universidad de Zaragoza”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of growth of MOF MIL-68(Al) thin films on porous alumina tubes using different linking agents

  • Perea-Cachero, Adelaida
  • Calvo, Pablo
  • Romero, Enrique
  • Téllez, Carlos
  • Coronas, Joaquín
The preparation of MIL-68(Al) films on the inner surface of alumina tubes is reported. As the direct deposition of the MOF on bare alumina gives poor adhesion results, three different linking agents are employed to achieve a good MOF–support interaction. Colloidal silica LUDOX®, zeolite silicalite-1, and natural polysaccharide chitosan are chosen as binders, because they contain potential functional groups (hydroxy, amino, ether), which can establish hydrogen bonds. While colloidal silica leads to noncontinuous MOF layers, silicalite-1 and chitosan give rise to uniform and well-anchored films, as confirmed by the different characterization techniques used to study the MOF layer. Single-gas permeation experiments are carried out to determine the quality and ideal efficiency of the membranes prepared with silicalite-1 and chitosan. The results for the MIL-68(Al)/silicalite-1 membranes evidence the existence of macrodefects. However, no cracks are found when chitosan is used as a linking agent, and the gas flow through the MIL-68(Al)/chitosan membranes clearly follows Knudsen diffusion., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (MAT2013-40556-R, MAT2016-77290-R), the Aragón Government (DGA, T05), the European Social Fund (ESF) and FEDER. A. P.-C. also thanks the DGA for a Ph.D. grant. The microscopy work was carried out in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA, Universidad de Zaragoza). The authors would like to acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of ultrathin films containing the metal organic framework Fe-MIL-88B-NH2 by the Langmuir-Blodgett technique

  • Benito, Javier
  • Fenero, Marta
  • Sorribas, Sara
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
  • Gascón, Ignacio
et al., In this work, the fabrication of ultrathin films containing the metal organic framework (MOF) Fe-MIL-88B-NH2 by the Langmuir–Blodgett (LB) technique has been explored. MOF crystals of two different sizes (1.5 ± 0.3 and 0.07 ± 0.01 μm) have been synthesized and assembled at the air–liquid interface by the LB method. The effect of the subphase pH and particle size on the film formation process has been studied. Moreover, for the first time, mixed MOF + polymer (the commercial soluble polyimide Matrimid®) LB films containing different MOF loadings have been fabricated. These experiments show that it is possible to obtain ultrathin MOF + polymer films with a controlled MOF density. Furthermore, MOF particles are homogeneously distributed in the polymer matrix, even with very large amounts of MOF (up to 95 wt%). LB films have been incorporated into materials of different nature, including glass and mica substrates and also polymeric membranes based on polysulfone Udel® and PIM-1 (polymer of intrinsic microporosity), and the modification of water contact angle after LB film deposition has been analyzed., Financial support from the Spanish MINECO (Projects MAT2013-40556-R and CTQ2012-33198), the Aragón Government (DGA) and the ESF are gratefully acknowledged. S.S. thanks the DGA for a fellowship. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High selectivity ZIF-93 hollow fiber membranes for gas separation

  • Cacho-Bailo, Fernando
  • Caro, Guillermo
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Téllez, Carlos
  • Coronas, Joaquín
Zeolitic imidazolate framework-93 (ZIF-93) continuous membranes were synthesized on the inner side of P84 co-polyimide hollow fiber supports by microfluidics. MOFs and polymers showed high compatibility and the membrane exhibited H2–CH4 and CO2–CH4 separation selectivities of 97 (100 °C) and 17 (35 °C), respectively., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. is grateful for the DGA fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increased selectivity in CO2/CH4 separation with mixed-matrix membranes of polysulfone and mixed-MOFs MIL-101(Cr) and ZIF-8

  • Tanh Jeazet, Harold B.
  • Sorribas, Sara
  • Román-Marín, José M.
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
  • Janiak, Christoph
Combination of two hydrothermally stable MOFs MIL-101(Cr) and ZIF-8 in a 1:1 ratio in a polysulfone (PSF) mixed-matrix membrane (MMM) showed a significant higher selectivity in mixed-gas CO2/CH4 permeation tests for 16 wt.-% MIL-101(Cr)/ZIF-8 compared to analogous single-filler MMMs [MIL-101(Cr) or ZIF-8] or to the also tested combination NH2-MIL-53(Al)/ZIF-8 (1:1 ratio). The CO2/CH4 selectivity increased significantly from 23 to 40 from pure PSF to the 16 wt.-% MIL-101(Cr)/ZIF-8 membrane. Separation of CO2/CH4 is relevant for purification (“sweetening”) of natural gas (CH4 as main component) which is soured with up to over 40 % CO2 and N2 and only useable at low CO2 concentrations., Financial support by the Ministry of Economy and Competitiveness (MINECO), Spain (grant number MAT2013-40556-R) and through the Initiative for the Development and Integration of Indian and European Research (INDIGO) (project number INDIGO-DST1-01, HMBSP, grant number 01DQ13002) is gratefully acknowledged. The work was in part also supported by the Bundesministerium für Bildung und Forschung (BMBF), Germany (grant number 01DK13026, project “Robust porous coordination polymers for mixed-matrix membranes”). In addition, the Aragón Government (T05) and the ESF are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of ZIF-8 particle size in the performance of polybenzimidazole mixed matrix membranes for pre-combustion CO2 capture and its validation through interlaboratory test

  • Sánchez-Laínez, Javier
  • Zornoza, Beatriz
  • Cao, Shuai
  • Sabetghadam, Anahid
  • Seoane, Beatriz
  • Gascón, Jorge
  • Kapteijn, Freek
  • Téllez, Carlos
  • Coronas, Joaquín
J. Sánchez-Laínez et al., The preparation and performance of mixed matrix membranes (MMMs) based on polybenzimidazole (PBI) and ZIF-8 nanoparticles of different average sizes (50, 70 and 150 nm) as filler are reported. MMMs containing 10 and 20 wt% of ZIF-8 were tested for H2/CO2 separation (pre-combustion CO2 capture) at 150 °C and feed pressures from 3 to 6 bar. The addition of ZIF-8 resulted in a clear improvement in membrane performance. Embedding 20 wt% of ZIF-8 resulted in a H2 permeability increase of six times and the H2/CO2 selectivity increased nearly by 55% compared to the bare PBI polymer membrane. Both permeability and selectivity improved as the filler size increased, due to the lower degree of agglomeration of the largest particles, that may be less active owing to their smaller external surface area. MMMs synthesized using dry 150 nm ZIF-8 filler showed a better performance than those containing wet filler. Apart from agglomeration concerns favoring wet filler handling as evidenced by infrared characterization, the MMM preparation with wet filler is simpler than with dry filler. Finally, the reproducibility of the membranes was confirmed by a European interlaboratory Round Robin test involving three different institutions., Financial support from the Spanish MINECO (MAT2013-40556-R), the Aragón Government (T05) and the ESF is gratefully acknowledged. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under Grant Agreement no. 608490, project M4CO2. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA). The use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) is acknowledged. J.G. and B.S. gratefully acknowledge financial support from the European Research Council under the European Union's Seventh Framework Programme (FP/2007–2013) /ERC Grant Agreement no. 335746, CrystEng-MOF-MMM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)

  • Perea-Cachero, Adelaida
  • Romero, Enrique
  • Téllez, Carlos
  • Coronas, Joaquín
The reversible crystalline transformation between MIL-53(Al) and MIL-68(Al) is described. This followed a uniform conversion model with cleavage and formation of metal–ligand bonds after exchange or removal of guest molecules. MIL-68(Al) materials produced during the transformations had higher thermal stability and crystallinity than the as-synthesized MIL-68(Al)., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) and European Regional Development Fund (MAT2013-40556-R, MAT2016-77290-R), ESF and the Aragón Government (DGA, T05) is gratefully acknowledged. A. P.-C. also thanks the DGA for a Ph.D. grant. The authors would like to acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza (UZ)) and the Laboratorio de Microscopías Avanzadas at INA (LMA-INA, UZ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interactive thermal effects on metal–organic framework polymer composite membranes

  • Cacho-Bailo, Fernando
  • Téllez, Carlos
  • Coronas, Joaquín
Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO2 sequestration, H2 production, and water supply and disposal. Mixed-matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF-8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm-sized ZIF-8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C)., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA, T05), and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. thanks the DGA for fellowship. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic framework membranes on the inner-side of a polymeric hollow fiber by microfluidic synthesis

  • Cacho-Bailo, Fernando
  • Catalán-Aguirre, Silvia
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Sebastián, Víctor
  • Téllez, Carlos
  • Coronas, Joaquín
Polymeric hollow fiber membranes represent a high degree of process intensification closer to scaling-up. Metal-organic framework ZIF-7 and ZIF-8 continuous membranes were synthesized on the inner surface of a 520 μm outer diameter polysulfone hollow fiber using microfluidics. This provided a constant reactant concentration along the membrane for growing homogeneous, continuous and thin layers of ZIF-7 (2.4 μm) and ZIF-8 (3.6 μm) with good adherence. The high quality of the membranes and the zeolite-like sodalite porous structure of both MOFs with pore apertures of 0.30–0.34 nm allowed operation at high temperature (150 °C) and pressure (4 bar). High separation factors in CO2 and H2 containing mixtures were achieved., Financial support (MAT2010-15870, MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA) and the ESF are gratefully acknowledged. We also acknowledge the use of Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. thanks DGA fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic framework MIL-101(Cr) based mixed matrix membranes for esterification of ethanol and acetic acid in a membrane reactor

  • Iglesia, Óscar de la
  • Sorribas, Sara
  • Almendro, Eduardo
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) based on the polyimide Matrimid® (PI) with metal-organic framework (MOF) MIL-101(Cr) as porous nanostructured filler were synthesized and applied as separation element in a membrane reactor to carry out the esterification of acetic acid with ethanol. The MMMs were characterized by techniques including X-ray diffraction, IR spectroscopy and scanning electron microscopy. In order to compare the performance of MIL-101(Cr)-PI MMMs in the membrane reactor, pure PI and HKUST-1-PI membranes were also used. MMMs provided a better reactor performance than the bare PI membrane because of the increase in permeability associated to the presence of MOF as filler. The PI membrane reactor barely achieved the same conversion as a fixed bed reactor, while the MIL-101(Cr)-PI membrane showed a reactor performance similar to that of the HKUST-1-PI membrane with higher stability, as confirmed by membrane characterization after the reaction experiments., Financial support from the Spanish Ministry of Economy and Competitiveness (project MAT2013-40556-R), the Regional Government of Aragon and the ESF is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal organic framework synthesis in the presence of surfactants: Towards hierarchical MOFs?

  • Seoane, Beatriz
  • Dikhtiarenko, A.
  • Mayoral, Álvaro
  • Téllez, Carlos
  • Coronas, Joaquín
  • Kapteijn, Freek
  • Gascón, Jorge
The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfactant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower temperatures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H2O and EtOH with a H2O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non-ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology., The authors acknowledge financial support from the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013)/ERC grant agreement no. 335746, CrystEng-MOF-MMM. The authors from the University of Zaragoza thank the Spanish Ministry of Economy and Competitiveness (MINECO) for financial support through the project MAT2013-40556-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF nanoparticles of MIL-68(Al), MIL-101(Cr) and ZIF-11 for thin film nanocomposite organic solvent nanofiltration membranes

  • Echaide‐Górriz, Carlos
  • Sorribas, Sara
  • Téllez, Carlos
  • Coronas, Joaquín
Nanoparticles (NPs) of MOFs MIL-101(Cr), MIL-68(Al) and ZIF-11 with sizes of 70, 103 and 79 nm, respectively, have been used in the development of thin film nanocomposite (TFN) membranes. Such membranes were synthesized with an ultrathin polyamide layer, in which NPs are embedded, about 100–150 nm thick on top of a polyimide P84® asymmetric support. Several important effects have been studied in the synthesis of the membranes for their application to organic solvent nanofiltration (OSN): the effect of the non-solvent bath, the chemical post-treatment, the concentration of precursors for interfacial polymerization and the polymerization time. The influence of different solvents (water, methanol, acetone and THF) and solutes (Acridine Orange, Sunset Yellow and Rose Bengal) on the OSN has also been studied. The hydrophilic character of the membrane and the solvent-membrane and solute–membrane interactions are shown to be the most important parameters affecting the performance of the composite membranes. A maximum permeance of 6.2 L m−2 h−1 bar−1 and a rejection above 90% was obtained from the combination of ZIF-11 and a post-treatment via filtration with dimethylformamide., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA, T05) and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF-polymer enhanced compatibility: Post-annealed zeolite imidazolate framework membranes inside polyimide hollow fibers

  • Cacho-Bailo, Fernando
  • Caro, Guillermo
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Téllez, Carlos
  • Coronas, Joaquín
This article is part of the themed collection: Zeolites and 3D Porous Solids., Thermal annealing, a commonly used procedure for improving the performance of polymeric membranes, is in this work exploited in the presence of a metal–organic framework (MOF) supported layer. MOFs and polymers are materials with a common organic character, suggesting an enhanced affinity between them when used together in membrane separation. Zeolite-like imidazolate frameworks (ZIFs) ZIF-8 and ZIF-93 with sod and rho structures and pore apertures of 0.34 and 0.36 nm, respectively, have been grown inside 356 μm OD co-polyimide P84 hollow fibers by microfluidics, leading to continuous supported membranes. When these membranes were thermally in situ annealed below the glass transition temperature, while monitoring both H2 and CH4 permeances, the MOF–polymer adhesion was enhanced. Thus the gas separation selectivity increased without any significant reduction in the gas permeance, and H2/CH4 and CO2/CH4 maximum selectivities of 103 and 18 (ZIF-8) and 101 and 20 (ZIF-93) were respectively measured. The good compatibility between MOF and polymer made improvements possible in the annealing of the membrane once it was prepared. If the annealing of the polymer was carried out before the MOF synthesis, the polymer chain rearrangement and surface smoothing prevented an optimum MOF–polymer interaction and the separation performance worsened. These results proved the compatibility between both materials and their synergistic contribution to gas selective transport., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA) and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. thanks the DGA fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the chemical filler-polymer interaction of nano- and micro-sized ZIF-11 in PBI mixed matrix membranes and their application for H2/CO2 separation

  • Sánchez-Laínez, Javier
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
The evolution of nano- and micro-sized ZIF-11 (nZIF-11 and ZIF-11, respectively) when embedded into a PBI polymeric matrix is studied. The prepared membranes, with loadings up to 55 wt%, have been characterized through several techniques (XRD, SEM, FTIR, TGA, 13C NMR and XPS) and the changes in the morphology of the fillers upon combination with PBI, as well as in the chemical environment of their main atoms (interactions between the linker of the filler and the benzyl rings of the polymeric bIm units) are discussed. All the membranes have been tested at temperatures ranging between 70 and 200 °C to study their H2/CO2 separation performance. The integration of both types of MOF in the polymeric phase improves not only the hydrogen permeability but also the selectivity in comparison with the pure polymer in all cases. H2 permeability increases due to a better diffusion of the penetrants, while CO2 adsorption on the MOF and solution in the polymer decreases. The best result obtained corresponds to the membrane with 55 wt% loading of ZIF-11, with 495 Barrer of H2 permeability and a H2/CO2 selectivity of 7.0., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement no. 608490, project M4CO2. In addition, financial support from the Spanish MINECO (MAT2013-40556-R), the Aragón Government and the ESF is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

  • Cacho-Bailo, Fernando
  • Matito-Martos, Ismael
  • Perez-Carbajo, Julio
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Sebastián, Víctor
  • Calero, Sofía
  • Téllez, Carlos
  • Coronas, Joaquín
All publication charges for this article have been paid for by the Royal Society of Chemistry., Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption., Financial support (MAT2013-40556-R) from the Spanish MINECO, the Aragón Government (DGA, T05) and the European Social Fund is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. acknowledges his DGA predoctoral fellowship. V. S. acknowledges the support of the People Program (CIG-Marie Curie Actions, REA grant agreement no. 321642). I. M.-M. thanks the Spanish MINECO for his predoctoral fellowship. The European Research Council through an ERC Grant (ERC2011-StG-279520-RASPA) is also acknowledged. All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA). The authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breathing of MIL-53(Al) by environmental SEM

  • Seoane, Beatriz
  • Sorribas, Sara
  • Mayoral, Álvaro
  • Téllez, Carlos
  • Coronas, Joaquín
The breathing behavior of MOF MIL-53(Al) attached to a glass support surface via covalent bonding has been monitored in real-time for a ca. one-μm single crystal with the help of environmental SEM. This allowed the attribution of porosity to the geometry in MIL-53(Al) crystals. In addition, complementary powder XRD, X-ray thermodiffractometry, TGA, Ar adsorption, FTIR, TEM and ED characterizations and crystallographic calculations were in agreement with the previous related literature., Financial support (MAT2010-15870, MAT2013-40556-R) and FPU Program fellowships (B. S.) from the Spanish MINECO, the Aragón Government and the ESF are gratefully acknowledged. We acknowledge the use Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sequential amine functionalization inducing structural transition in an aldehyde-containing zeolitic imidazolate framework: application to gas separation membranes

  • Cacho-Bailo, Fernando
  • Etxeberria-Benavides, Miren
  • Karvan, Oğuz
  • Téllez, Carlos
  • Coronas, Joaquín
A modification in the gas separation performance of zeolitic imidazolate framework (ZIF)-supported hollow fiber (HF) membranes by means of an imine-condensation functionalization reaction carried out by microfluidics is reported. The accommodation of voluminous amine molecules in the SIM-1, Zn(4-methyl-5-imidazolecarboxaldehyde)2, also known as ZIF-94, sod structure during the functionalization reaction caused the ZIF atoms to be rearranged in a less dense rho structure, with a wider pore diameter and a diminished CO2 affinity. These changes had effects on the membrane performance, resulting in an enhanced CO2 permeance while maintaining a good permeance–selectivity balance. ZIF aldehyde-containing SIM-1 membranes were earlier prepared on the inner side of polymeric P84® HF using a microfluidic approach. The SIM-1 membranes displayed very interesting results in the separation of gas mixtures of great relevance to the natural gas field. High selectivities in the separation of He/CH4 (160), H2/CH4 (136) and CO2/CH4 (38) mixtures were achieved, and these are the first SIM-1 membranes with such a high separation performance to the best of our knowledge. These SIM-1 membranes were in situ stepwise functionalized with long-chain amine solutions, namely, hexyl- and nonylamine. Microfluidics allowed the easy sequential implementation of this post-reaction step in the membrane fabrication procedure. An imine-condensation reaction took place between the aldehyde groups in the 4-methyl-5-imidazolecarboxaldehyde ligand forming SIM-1 and the corresponding amines. The extent of the reaction was analyzed by FTIR, TGA and XRD, together with the changes in the textural properties and the adsorption capacities., Financial support (MAT2013-40556-R, MAT2016-77290-R) from the Spanish MINECO, the Aragón Government (DGA, T05), the European Social Fund and FEDER is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). F. C.-B. acknowledges his DGA predoctoral fellowship. All the microscopy work was done at the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous use of MOFs MIL-101(Cr) and ZIF-11 in thin film nanocomposite membranes for organic solvent nanofiltration

  • Echaide‐Górriz, Carlos
  • Navarro, Marta
  • Téllez, Carlos
  • Coronas, Joaquín
The MOFs Cr carboxylate MIL-101(Cr) and Zn imidazolate ZIF-11 have different chemical and textural properties. These properties have been combined to prepare thin film nanocomposite (TFN) membranes for organic solvent nanofiltration (OSN) with the two MOFs simultaneously embedded in the same membrane. The TFN membrane containing only ZIF-11 permeated faster than that with only MIL-101(Cr) when filtering sunset yellow (SY) (4.9 L m-2 h-1 bar-1) and acridine orange (AO) (3.2 L m-2 h-1 bar-1), although MIL-101(Cr) alone gave rise in both cases to better rejections (above 90%). The combination of the two MOFs led to a versatile TFN membrane that showed an intermediate performance that improved the rejections given by the TFN membrane synthesized with ZIF-11 and the permeances corresponding to the TFN membrane synthesized with MIL-101(Cr). The effect of the temperature on the TFN membranes designed for this work has also been studied, obtaining apparent activation energies of 13.2 ± 2.1 and 8.3 ± 1.1 kJ mol-1 for the OSN of pure methanol and SY-methanol, respectively., Financial support (MAT2013-40556-R, MAT2016-77290-R) from the Spanish MINECO, the Aragón Government (DGA, T05), the European Social Fund and FEDER is gratefully acknowledged. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMAINA). The authors acknowledge the LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural contraction of zeolitic imidazolate frameworks: Membrane application on porous metallic hollow fibers for gas separation

  • Cacho-Bailo, Fernando
  • Etxeberria-Benavides, Miren
  • David, Oana
  • Téllez, Carlos
  • Coronas, Joaquín
Positive thermal expansion coefficients (TECs) of 52 × 10–6 and 35 × 10–6 K–1 were experimentally calculated in the −116 to 250 °C range for the III-phases of zeolitic imidazolate frameworks (ZIF) ZIF-9(Co) and ZIF-7(Zn), respectively, by means of the unit cell dimensions and volume of the materials in the monoclinic crystal system calculated from the XRD patterns. The unit cell dimensions and volume showed a significant expansion phenomenon as the temperature increased, by as much as 5.5% for ZIF-9-III in the studied range. To exploit the advantages of such thermal behavior, a new approach to the fabrication of ZIF-9-III membranes on thin, flexible, and highly porous nickel hollow fiber (Ni HF) supports by a versatile and easy-controllable microfluidic setup is herein reported. These Ni HF supports result from the sintering of 25-μm Ni particles and display very positive mechanical properties and bending resistance. As compared to the traditional polymer-based HF membranes, the ZIF metal-supported membrane exhibited good durability and robustness throughout its operation in a wide temperature range and after heating and cooling cycles. These benefits derive from (1) the pore-plugging membrane configuration resulting from the high porosity of the support and (2) the similarity between the TECs of the ZIF and the metallic support, both positive, which enhances their mutual compatibility. An increase in the H2/CO2 separation selectivity at low temperatures (as high as 22.2 at −10 °C, along with 102 GPU permeance of H2) was achieved, in agreement with the structural variations observed in the ZIF material., Financial support (Grants MAT2013-40556-R, MAT2016-77290-R) from the Spanish MINECO and FEDER, the Aragón Government (DGA, Grant T05) ,and the European Social Fund is gratefully acknowledged. F.C.-B. acknowledges his DGA predoctoral fellowship. We also acknowledge the use of the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterisation of MOF/ionic liquid/chitosan mixed matrix membranes for CO2/N2 separation

  • Casado-Coterillo, Clara
  • Fernández-Barquín, Ana
  • Zornoza, Beatriz
  • Téllez, Carlos
  • Coronas, Joaquín
  • Irabien, Ángel
Mixed matrix membranes (MMMs) have been prepared by combining a small amount of highly absorbing non-toxic ionic liquid, [emim][Ac] (IL) (5 wt%), a biopolymer from renewable abundant natural resources, chitosan (CS), and nanometre-sized metal–organic framework (MOF) ZIF-8 or HKUST-1 particles to improve the selectivity of the IL–CS hybrid continuous polymer matrix. The TGA revealed that the thermal stability has been enhanced by the influence of both IL and ZIF-8 or HKUST-1 fillers, while keeping a water content of around 20 wt%, which suggests the potential of such materials for developing high temperature water resistant membranes for CO2 separation. The CO2 and N2 single gas permeation performance was tested at temperatures in the range of 25–50 °C, to compare with the previously reported IL–CS hybrid membranes. The best CO2 permeability and CO2/N2 selectivity performance is obtained for 10 wt% ZIF-8 and 5 wt% HKUST-1/IL–CS membranes, as high as 5413 ± 191 Barrer and 11.5, and 4754 ± 1388 Barrer and 19.3, respectively. This is attributed to a better adhesion and smaller particle size of ZIF-8 than HKUST-1 nanoparticles with respect to the IL–CS continuous matrix, as interpreted by Hansen solubility parameters and Maxwell-based models, modified to account for rigidification, pore blockage and crystallinity of the CS matrix, with very accurate predictions., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) for the project CTQ2012-31229 at the University of Cantabria, and MAT2013-40556-R, at the University of Zaragoza, is gratefully acknowledged. C. C. C. and A. F. B. also thank the MINECO for the Ramón y Cajal contract (RYC-2011-08550) and the post-graduate research grant (BES2013-064266), respectively, at the Universidad de Cantabria., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and gas adsorption properties of mesoporous silica-NH2-MIL-53(Al) core-shell spheres

  • Sorribas, Sara
  • Zornoza, Beatriz
  • Serra-Crespo, Pablo
  • Gascón, Jorge
  • Kapteijn, Freek
  • Téllez, Carlos
  • Coronas, Joaquín
Ordered mesoporous silica-NH2-MIL-53(Al) core–shell spheres of about 4 μm in diameter have been synthesized by seeding the corresponding mesoporous silica spheres (MSSs) with crystals of NH2-MIL-53(Al) and subsequent secondary crystal growth into a MOF shell. The morphology of the particles was analyzed by SEM, while TGA, EDX and XRD characterizations gave information on the composition and structure of this material and the activation of the MOF. N2 adsorption analysis revealed that the NH2-MIL-53(Al) shell controlled the access of guest molecules into the hydrophilic silica mesoporous structure, while the breathing behavior of the microporous NH2-MIL-53(Al) shell was confirmed by CO2 adsorption isotherms., Financial support from the Spanish Ministry of Economy and Competitiveness (MAT2013-40556-R), DGA Program fellowships (S. S.) from the Regional Government of Aragón and the ESF are gratefully acknowledged. We acknowledge the use Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza). All the microscopy work was done in the Laboratorio de Microscopías Avanzadas at the Instituto de Nanociencia de Aragón (LMA-INA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, structure and characterization of a layered coordination polymer based on Zn(II) and 6-(methylmercapto)purine

  • Perea-Cachero, Adelaida
  • Seoane, Beatriz
  • Diosdado, Beatriz E.
  • Téllez, Carlos
  • Coronas, Joaquín
A layered coordination polymer (LCP) named UZAR-S12 was synthesized. Its structure and formula [Zn2(μ2-mMP)3(NO3)(DMF)(H2O)]n·nDMF (mMP, 6-(methylmercapto)purinate; DMF, N,N-dimethylformamide) were determined by single crystal X-ray diffraction. UZAR-S12 is characterized by two kinds of Zn centres. Zn1 is bonded to three mMP ligands at the basal plane, and one water molecule and one DMF molecule at the axial positions, giving rise to a slightly distorted trigonal bipyramidal geometry. Zn2 is coordinated to three mMP linkers and one NO3− resulting in a tetrahedral environment. The layers are arranged yielding a three-dimensional network with guest DMF trapped between them. Lattice and coordination DMF can be replaced reversibly by other solvents producing a contraction (methanol) or an expansion (N,N-diethylformamide) of the framework. A solvent exchange method was used from the vapour phase which preserved the sample crystallinity., Financial support from the Spanish Ministry of Economy and Competitiveness (MAT2013-40556-R) and the European Social Fund (ESF) through the Aragón Government (DGA, T05) is gratefully acknowledged. A. P.-C. acknowledges a Ph.D. Grant from the DGA. The authors would like to acknowledge the University of Zaragoza for the use of the Servicio General de Apoyo a la Investigación-SAI and the Laboratorio de Microscopías Avanzadas (LMA) at INA., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)

  • Perea-Cachero, A.
  • Romero, E.
  • Téllez, C.
  • Coronas, J.
The reversible crystalline transformation between MIL-53(Al) and MIL-68(Al) is described. This followed a uniform conversion model with cleavage and formation of metal-ligand bonds after exchange or removal of guest molecules. MIL-68(Al) materials produced during the transformations had higher thermal stability and crystallinity than the as-synthesized MIL-68(Al).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

MOF nanoparticles of MIL-68(Al), MIL-101(Cr) and ZIF-11 for thin film nanocomposite organic solvent nanofiltration membranes

  • Echaide-Gorriz, C.
  • Sorribas, S.
  • Tellez, C.
  • Coronas, J.
Nanoparticles (NPs) of MOFs MIL-101(Cr), MIL-68(Al) and ZIF-11 with sizes of 70, 103 and 79 nm, respectively, have been used in the development of thin film nanocomposite (TFN) membranes. Such membranes were synthesized with an ultrathin polyamide layer, in which NPs are embedded, about 100-150 nm thick on top of a polyimide P84 (R) asymmetric support. Several important effects have been studied in the synthesis of the membranes for their application to organic solvent nanofiltration (OSN): the effect of the non-solvent bath, the chemical post-treatment, the concentration of precursors for interfacial polymerization and the polymerization time. The influence of different solvents (water, methanol, acetone and THF) and solutes (Acridine Orange, Sunset Yellow and Rose Bengal) on the OSN has also been studied. The hydrophilic character of the membrane and the solvent-membrane and solute-membrane interactions are shown to be the most important parameters affecting the performance of the composite membranes. A maximum permeance of 6.2 L m(-2) h(-1) bar(-1) and a rejection above 90% was obtained from the combination of ZIF-11 and a post-treatment via filtration with dimethylformamide.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of growth of MOF MIL-68(Al) thin films on porous alumina tubes using different linking agents

  • Perea-Cachero, A.
  • Calvo, P.
  • Romero, E.
  • Téllez, C.
  • Coronas, J.
The preparation of MIL-68(Al) films on the inner surface of alumina tubes is reported. As the direct deposition of the MOF on bare alumina gives poor adhesion results, three different linking agents are employed to achieve a good MOF–support interaction. Colloidal silica LUDOX®, zeolite silicalite-1, and natural polysaccharide chitosan are chosen as binders, because they contain potential functional groups (hydroxy, amino, ether), which can establish hydrogen bonds. While colloidal silica leads to noncontinuous MOF layers, silicalite-1 and chitosan give rise to uniform and well-anchored films, as confirmed by the different characterization techniques used to study the MOF layer. Single-gas permeation experiments are carried out to determine the quality and ideal efficiency of the membranes prepared with silicalite-1 and chitosan. The results for the MIL-68(Al)/silicalite-1 membranes evidence the existence of macrodefects. However, no cracks are found when chitosan is used as a linking agent, and the gas flow through the MIL-68(Al)/chitosan membranes clearly follows Knudsen diffusion.