Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y modelado de una estructura sensorial ultrasónica MIMO basado en M-CSS y técnicas de correlación, Analysis and Modeling of a MIMO Ultrasonic Sensorial Structure based on M-CSS and correlation techniques.

  • Ochoa, Alberto
  • Ureña, Jesús
  • Hernández, Álvaro
  • González, Apolinar
  • Mata, Walter
  • Félix, Ramón A.
[EN] This paper describes the analysis and modeling of an ultrasonic sensorial structure based on processing algorithm that uses a set of macro-sequences and correlation techniques for obtaining the impulse response of transmission channels simultaneously is proposed. The sensory structure is formed by multiple ultrasonic transducers that transmitting and receiving environment information simultaneously. This processing algorithm employs a pseudorandom macro-sequence obtained from a complementary set of M sequences (M- CSS) which, by auto-correlation and cross-correlation functions, the impulse responses from environment are obtained. The transmission in the ultrasonic system is represented by frequency selective MIMO model, which is analyzed every instant in the process of reflection-transmission-reception of the signals generated. Once the system model of ultrasonic transmission MIMO is developed and correlation algorithms are implemented for the detection of macro-sequences; the mathematical model, the results obtained in the simulation as well as experimental evidence are presented in this paper. These validate the use of the methodology applied to the channel modeling as well as the estimation of the impulse response of the transmission channels to process the received echoes corresponding to an object in front of the sensor system. The model implemented allows it on can develop algorithms and processing techniques, before they are physically implemented, in order to reduce application development time. In all such cases, is possible to obtain the impulse responses produced in the environment due to the reflectors located opposite the sensor system using correlation techniques. , [ES] En este artículo se propone el análisis y modelado de una estructura sensorial ultrasónica empleando un algoritmo de procesamiento que utiliza un conjunto de macro-secuencias y técnicas de correlación para obtener respuestas impulsivas de canales de transmisión de forma simultánea. La estructura sensorial está formada por múltiples transductores ultrasónicos que transmiten y reciben información del entorno simultáneamente. Este algoritmo de procesamiento emplea una macro-secuencia pseudo-aleatoria obtenida a partir un conjunto complementario de M secuencias (M-CSS) con las cuales, mediante funciones de auto-correlación y correlación cruzada, se generan las respuestas impulsivas del entorno. Para modelar el sistema de transmisión ultrasónico se emplea el modelo MIMO de frecuencia selectiva, con el cual se logra analizar cada instante del proceso de emisión-reflexión-recepción de las señales generadas. Una vez que el modelo del sistema de transmisión ultrasónico MIMO es desarrollado y los algoritmos de correlación son implementados para la detección de las macro-secuencias, se presenta en este documento el modelo matemático y los resultados obtenidos en las simulaciones así como en las pruebas experimentales. Estos validan la utilización de la metodología del modelado de canal aplicado, como de la estimación de las respuestas impulsivas de los canales de transmisión al procesar los ecos recibidos correspondientes a un objeto frente al sistema sensor. El modelo implementado permite desarrollar sobre de él, algoritmos y técnicas de procesamiento, antes de que estos sean implementados físicamente, con el fin de reducir el tiempo de desarrollo de aplicaciones. En cada uno de los casos considerados, se logró obtener las respuestas impulsivas considerando que está presente un objeto frente a la estructura sensorial., Este trabajo ha sido posible gracias a el ministerio de educación y ciencia español (PROYECTO RESELAI: TIN2006- 14986-CO2-01); al Ministerio de Fomento (Proyecto VIATOR: ref 70025-T05); y al Fondo Ramón Álvarez-Buylla de Aldana (ADCESUDRU FRABA715/10).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Genetic diversity, sensitivity to phenylamide fungicides and aggressiveness of Phytophthora ramorum on Camellia, Rhododendron and Viburnum plants in Spain

  • Pérez Sierra, Ana María
  • Álvarez, LA
  • Vercauteren, A
  • Heungens, K
  • Abad Campos, Paloma|||0000-0002-5979-4349
Phytophthora ramorum has been detected in official plant health surveys on Rhododendron, Viburnum and Camellia in ornamental nurseries in northern Spain since 2003. A collection of 94 isolates of P. ramorum was obtained from 2003 to 2008 from plants with symptoms at different geographical locations. Isolates were identified based on morphology and sequence of the rDNA ITS region. Mating type, genetic variation, sensitivity to phenylamide fungicides and aggressiveness of these isolates were determined. All isolates belonged to the A1 mating type, ruling out the possibility of genetic recombination. Seven microsatellite markers were used to study genetic diversity; three out of the seven microsatellite markers were polymorphic within the Spanish population of P. ramorum. This study confirms that all Spanish isolates of P. ramorum belonged to the EU1 lineage. Twelve intralineage genotypes were detected, five that are unique to Spain (EU1MG38, EU1MG41, EU1MG37, EU1MG39 and EU1MG40) and seven that are also present in at least one other European country (EU1MG1, EU1MG29, EU1MG22, EU1MG13, EU1MG2, EU1MG18 and EU1MG26). Genotypes EU1MG37, EU1MG39 and EU1MG40 were isolated from Rhododendron from one region; EU1MG38 and EU1MG41 were isolated from Camellia from two different regions. Isolates of genotype EU1MG38 were resistant to metalaxyl and mefenoxam. The level of genetic diversity within the Spanish population of P. ramorum is limited and indicates a relatively recent clonal expansion., The work of A. Vercauteren was supported in part by grant RT-05/04-PHYRAM1 of the Belgian Federal Public Service 'Health, Food Chain Safety and Environment'. This research was financially supported by the Project AGL2007-64690/AGR (Ministerio de Educacion y Ciencia, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel magnetic manganese-iron materials for separation of solids used in high-temperature processes: Application to oxygen carriers for chemical looping combustion

  • Abad Secades, Alberto
  • Pérez-Vega, Raúl
  • Izquierdo Pantoja, María Teresa
  • Gayán Sanz, Pilar
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
  • Adánez Elorza, Juan
6 figures, 3 tables.-- Supplementary information available., Different chemical looping processes allow burning or gasify solid fuels with inherent CO2 capture because the oxygen is transferred from air to the fuel through a metal oxide based material, which is named oxygen carrier. To improve process efficiency and CO2 capture, highly reactive synthetic materials could be used. One of the challenges of using solid fuels is the oxygen carrier separation from the ash, because loss of oxygen carrier particles is expected during ash drainage. So, their costs would have necessary the recovery of the synthetic oxygen carrier. Mn-Fe based materials show magnetic properties in the spinel phase, which could be used for a magnetic separation. When these Mn-Fe materials are used at high temperature under oxidizing or reducing atmospheres, stability of the spinel phase should be guaranteed in order to take advantage of the magnetic properties. The design of low reactive Mn-Fe based materials with magnetic properties, which can be used as a support material for other highly reactive and active phases, was the main objective of this work. In this sense, the support must have high crushing strength, low reactivity under oxidation and reduction atmospheres at high temperatures and permanent magnetism at low temperature for solids separation. Materials prepared with different Mn/(Mn + Fe) molar ratios and calcination conditions were evaluated regarding mechanical strength, inerticity and magnetic properties. A Cu-based oxygen carrier prepared on the optimal support was prepared and evaluated along 240 oxidation-reduction cycles in thermobalance (25 h experiment), exhibiting suitable mechanical and magnetic characteristics as well as high reactivity., This work has been supported by the AEI/FEDER, UE ENE2016-77982-R, ENE2017-89473-R and ID2019-106441RB-I00 projects, and by the Regional Aragon Government via the T05_17R research group funding., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Langmuir-Blodgett Films of the Metal-Organic Framework MIL-101(Cr): Preparation, Characterization, and CO2 Adsorption Study Using a QCM-Based Setup

  • Benito. J
  • Sorribas. S
  • Lucas. I
  • Coronas. J
  • Gascon.I
This work reports the fabrication and characterization of Langmuir–Blodgett films of nanoparticles (size 51 ± 10 nm) of the metal organic framework MIL-101(Cr). LB film characterization by SEM, UV–vis, GIXRD, and QCM has shown that the addition of 1 wt % of behenic acid to MOF dispersion allows obtaining dense monolayers at the air–water interface that can be deposited onto solid substrates of different nature with transfer ratios close to 1. Moreover, a QCM-based setup has been built and used for the first time to measure CO2 adsorption isotherms at 303 K on MOF LB films, proving that LB films with MOF masses between 1.2 (1 layer) and 2.3 (2 layers) µg can be used to obtain accurate adsorption values at 100 kPa, similar to those obtained by conventional adsorption methods that require much larger MOF quantities (tens of milligrams).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemocatalysis of sugars to produce lactic acid derivatives on zeolitic imidazolate frameworks

  • Murillo, B.
  • Zornoza, B.
  • De La Iglesia, O.
  • Téllez, C.
  • Coronas, J.
Several research studies related to biorefining have focused on developing routes for biomass conversion into biomaterials or platform molecules. In this work, the zeolitic imidazolate frameworks (ZIFs) ZIF-8 and ZIF-67 have been tested as catalysts in the conversion of sugars (sucrose, glucose and fructose) into methyl lactate. ZIF-8 and ZIF-67 have the same sodalite type zeolite structure but behaved differently in the sugar conversion in methanol due to the respective presence of Zn and Co in their structures. ZIF-8 has been found to be the most active for the conversion of sugars into methyl lactate (yield 42%) and was reused in four catalytic cycles. The chemical and physical effects caused by these cycles on the catalysts have been studied by several techniques (X-ray diffraction, thermogravimetric analyses, infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electronic microscopy and nitrogen adsorption).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Insight into ETS-10 synthesis for the preparation of mixed matrix membranes for CO2/CH4 gas separation

  • Sorribas, S.
  • Comesaña-Gándara, B.
  • Lozano, A.E.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
An in-depth study into the synthesis of the titanosilicate ETS-10 has been carried out to obtain crystals with different particle sizes, roughness and porosity. The effect of these parameters on the CO2/CH4 gas separation performance using mixed matrix membranes (MMMs) has been studied. MMMs based on ETS-10 polycrystalline particles of 1-2 µm in size with high surface roughness and porosity gave rise to a good filler dispersion and filler-polymer interaction. The addition of 10 wt% ETS-10 polycrystalline particles into the polysulfone matrix increased the CO2 permeability from 6.1 to 7.8 Barrer and the CO2/CH4 selectivity from 31 to 38. When using the polyimide 6FDA-6FpDA, a glassy polymer with high gas permeability, the addition of 10 wt% ETS-10 polycrystalline particles increased the CO2 permeability from 96 to 125 Barrer, with a decrease in CO2/CH4 selectivity from 56 to 51.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis, structure and characterization of a layered coordination polymer based on Zn(II) and 6-(methylmercapto)purine

  • Perea-Cachero, C.
  • Seoane, B.
  • Diosdado, B.
  • Téllez, C.
  • Coronas, J.
A layered coordination polymer (LCP) named UZAR-S12 was synthesized. Its structure and formula [Zn2(µ2-mMP)3(NO3)(DMF)(H2O)]n·nDMF (mMP, 6-(methylmercapto)purinate; DMF, N,N-dimethylformamide) were determined by single crystal X-ray diffraction. UZAR-S12 is characterized by two kinds of Zn centres. Zn1 is bonded to three mMP ligands at the basal plane, and one water molecule and one DMF molecule at the axial positions, giving rise to a slightly distorted trigonal bipyramidal geometry. Zn2 is coordinated to three mMP linkers and one NO3- resulting in a tetrahedral environment. The layers are arranged yielding a three-dimensional network with guest DMF trapped between them. Lattice and coordination DMF can be replaced reversibly by other solvents producing a contraction (methanol) or an expansion (N,N-diethylformamide) of the framework. A solvent exchange method was used from the vapour phase which preserved the sample crystallinity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Interactive thermal effects on metal–organic framework Polymer composite membranes

  • Cacho Bailo, Fernando
  • Téllez, Carlos
  • Coronas, Joaquín
Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO2 sequestration, H2 production, and water supply and disposal. Mixed-matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF-8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt¿% 140 nm-sized ZIF-8 loading causes a 40¿% decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545¿°C) 80¿°C lower than in the raw polymer (625¿°C).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

  • Cacho Bailo, Fernando
  • Matito-Martos, Ismael
  • Pérez-Carbajo, Julio
  • Etxeberría-Benavides, Miren
  • Karvan, Oguz
  • Sebastián, Víctor
  • Calero, Sofía
  • Téllez, Carlos
  • Coronas, Joaquín
Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gas separation with mixed matrix membranes obtained from MOF UiO-66-graphite oxide hybrids

  • Castarlenas, S.
  • Téllez, C.
  • Coronas, J.
UiO-66-GO hybrids were obtained by hydrothermal synthesis of MOF UiO-66 (a Zr terephthalate) on graphite oxide (GO). These hybrids with appropriate texture and presence of nanosized MOF particles (in the ca. 30–100 nm range) have been used as fillers to prepare mixed matrix membranes (MMMs) with two different polymers, polysulfone (PSF) and polyimide (PI), as the matrixes, with contents varying between 0 and 32 wt%. The MMMs were applied to the separation of H2/CH4 and CO2/CH4 mixtures at different temperatures (35, 60 and 90 °C). Besides finding a good filler-polymer interaction, in the particular case of the hybrid filler, the barrier effect of the GO and the microporosity of the MOF dominated the separation properties of the MMMs. In all cases (different MMMs and separation mixtures) the effect of the temperature was to increase the permeability with a simultaneous decrease in the corresponding selectivity. In terms of permselectivity, the best H2/CH4 separation results were obtained (at 35 °C) with a PI based MMM containing only UiO-66 as filler (H2 permeability of 73 Barrer and H2/CH4 selectivity of 151), while a hybrid UiO-66-GO filler produced the best CO2/CH4 performance (CO2/CH4 selectivity value of 51 at 21 Barrer of CO2), also using a PI polymer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)

  • Perea-Cachero, A.
  • Romero, E.
  • Téllez, C.
  • Coronas, J.
The reversible crystalline transformation between MIL-53(Al) and MIL-68(Al) is described. This followed a uniform conversion model with cleavage and formation of metal-ligand bonds after exchange or removal of guest molecules. MIL-68(Al) materials produced during the transformations had higher thermal stability and crystallinity than the as-synthesized MIL-68(Al).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sequential amine functionalization inducing structural transition in an aldehyde-containing zeolitic imidazolate framework: Application to gas separation membranes

  • Cacho-Bailo, Fernando
  • Etxeberría-Benavides, Miren
  • Karvan, Oguz
  • Téllez, Carlos
  • Coronas, Joaquín
A modification in the gas separation performance of zeolitic imidazolate framework (ZIF)-supported hollow fiber (HF) membranes by means of an imine-condensation functionalization reaction carried out by microfluidics is reported. The accommodation of voluminous amine molecules in the SIM-1, Zn(4-methyl-5-imidazolecarboxaldehyde)2, also known as ZIF-94, sod structure during the functionalization reaction caused the ZIF atoms to be rearranged in a less dense rho structure, with a wider pore diameter and a diminished CO2 affinity. These changes had effects on the membrane performance, resulting in an enhanced CO2 permeance while maintaining a good permeance-selectivity balance. ZIF aldehyde-containing SIM-1 membranes were earlier prepared on the inner side of polymeric P84® HF using a microfluidic approach. The SIM-1 membranes displayed very interesting results in the separation of gas mixtures of great relevance to the natural gas field. High selectivities in the separation of He/CH4 (160), H2/CH4 (136) and CO2/CH4 (38) mixtures were achieved, and these are the first SIM-1 membranes with such a high separation performance to the best of our knowledge. These SIM-1 membranes were in situ stepwise functionalized with long-chain amine solutions, namely, hexyl- and nonylamine. Microfluidics allowed the easy sequential implementation of this post-reaction step in the membrane fabrication procedure. An imine-condensation reaction took place between the aldehyde groups in the 4-methyl-5-imidazolecarboxaldehyde ligand forming SIM-1 and the corresponding amines. The extent of the reaction was analyzed by FTIR, TGA and XRD, together with the changes in the textural properties and the adsorption capacities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

MOF nanoparticles of MIL-68(Al), MIL-101(Cr) and ZIF-11 for thin film nanocomposite organic solvent nanofiltration membranes

  • Echaide-Gorriz, C.
  • Sorribas, S.
  • Tellez, C.
  • Coronas, J.
Nanoparticles (NPs) of MOFs MIL-101(Cr), MIL-68(Al) and ZIF-11 with sizes of 70, 103 and 79 nm, respectively, have been used in the development of thin film nanocomposite (TFN) membranes. Such membranes were synthesized with an ultrathin polyamide layer, in which NPs are embedded, about 100-150 nm thick on top of a polyimide P84 (R) asymmetric support. Several important effects have been studied in the synthesis of the membranes for their application to organic solvent nanofiltration (OSN): the effect of the non-solvent bath, the chemical post-treatment, the concentration of precursors for interfacial polymerization and the polymerization time. The influence of different solvents (water, methanol, acetone and THF) and solutes (Acridine Orange, Sunset Yellow and Rose Bengal) on the OSN has also been studied. The hydrophilic character of the membrane and the solvent-membrane and solute-membrane interactions are shown to be the most important parameters affecting the performance of the composite membranes. A maximum permeance of 6.2 L m(-2) h(-1) bar(-1) and a rejection above 90% was obtained from the combination of ZIF-11 and a post-treatment via filtration with dimethylformamide.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new zeolitic hydroxymethylimidazolate material and its use in mixed matrix membranes based on 6FDA-DAM for gas separation

  • Perea-Cachero, Adelaida
  • Sánchez-Laínez, Javier
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • Téllez, Carlos
  • Coronas, Joaquín
The new ZIF named UZAR-S13 is formed by Zn2+ and 4(5)-(hydroxymethyl)imidazolate. UZAR-S13 has two distinct phases according to SEM and XRD: amorphous spheres and sheet crystals. UZAR-S13 and byproducts, with no N2 adsorption, rendered a notable CO2 uptake (up to 3.8 mmol g-1 at 30 bar and 0 °C), approaching values of known ZIFs. The most promising materials were included as fillers in mixed matrix membranes based on copolyimide 6FDA-DAM to study the separation of CO2/CH4, CO2/N2, H2/CO2 and H2/CH4 mixtures. The pore blocking hindered the gas flow of bulky molecules (CH4, N2 and CO2). The high CO2 adsorption on sheet crystals also contributed to the decrease in the permeability of CH4, N2 and CO2, giving poor selectivities. In contrast, the MMMs improved both the H2/CH4 selectivity (8.9–12.7 vs. 7.2) and permeability of H2 (544–597 vs. 505 Barrer) of the bare 6FDA-DAM membrane. This emphasizes the potential application of the fillers in the separation by molecular sieving of gas mixtures without CO2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dry reforming of biogas in fluidized bed: Process intensification

  • Ugarte, P.
  • Durán, P.
  • Lasobras, J.
  • Soler, J.
  • Menéndez, M.
  • Herguido, J.
Biogas is a renewable resource obtained mainly from the anaerobic fermentation of agro-industrial and anthropogenic residues. The production of hydrogen by dry reforming of methane represents a potential application for this renewable energy carrier. This could play a positive contribution towards meeting the challenge of providing a global supply of energetically sustainable and environmentally friendly energy. This work combines a catalytic reaction, a separation and the catalyst regeneration in a single reactor. To this end, a two zone fluidized bed reactor (TZFBR) with hydrogen selective membranes has been employed (TZFBR + MB). The operating conditions for the process of dry reforming of biogas have been optimized experimentally, both in TZFBR and TZFBR + MB. Several catalysts were prepared (Ni/Al2O3, Ni–Ce/Al2O3, Ni–Co/Al2O3), characterized and tested in reactions in both TZFBR and in TZFBR + MB. Finally, the influence of using oxygen or carbon dioxide as regenerating gases in the process has been studied. Experimental results show the feasibility of using CO2 for in situ catalyst regeneration, avoiding the potential problems associated with the use of O2.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the separation properties of zeolitic imidazolate framework core-shell structures via post-synthetic modification

  • Sánchez-Laínez, J.
  • Veiga, A.
  • Zornoza, B.
  • Balestra, S.R.G.
  • Hamad, S.
  • Ruiz-Salvador, A.R.
  • Calero, S.
  • Téllez, C.
  • Coronas, J.
The conversion of ZIF-8 into ZIF-7 via post-synthetic modification with benzimidazole has been monitored by quantifying the liberated 2-methylimidazole by chromatography. The reaction kinetics have been adjusted to the shrinking core model, providing the diffusion coefficient of bIm inside the pores and the reaction kinetic constant (2.86 × 10-7 cm2 s-1 and 1.36 × 10-4 cm s-1, respectively). A wide variety of ZIF-7/8 hybrid core-shell frameworks have been obtained during this reaction. The most promising have been characterized by SEM/TEM, TGA, N2 and CO2 adsorption, FTIR and 13C NMR, showing features of the coexistence of both phases inside the frameworks. Their structures have also been simulated, providing comparable XRD and adsorption results. The hybrid material has been used as a filler for PBI mixed matrix membranes (MMMs) applied to H2/CO2 separation, enhancing the performances of the bare PBI polymer and MMMs containing ZIF-8 or ZIF-7 as a filler, with a maximum H2 permeability value of 1921 Barrer and a H2/CO2 selectivity of 11.8.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultrapermeable Thin Film ZIF-8/Polyamide Membrane for H-2/CO2 Separation at High Temperature without Using Sweep Gas

  • Sanchez-Lainez, J.
  • Paseta, L.
  • Navarro, M.
  • Zornoza, B.
  • Tellez, C.
  • Coronas, J.
The use of thin film composites containing metal-organic frameworks (MOFs) as filler is of widespread interest for nanofiltration issues, since their thin selective layer allows a high permeation flow. The application of this kind of membranes for gas separation should provide a better permeance in comparison with other polymeric membranes and a reduction in the amount of MOF required for their fabrication. Here, the preparation of 50-100 nm thick polyamide flat membranes containing zeolitic imidazolate framework-8 (ZIF-8) nanoparticles is shown via interfacial polymerization, containing a lower amount of MOF (0.013 g m(-2) membrane) as compared to other membranes used for gas separation. The membranes are applied for H-2/CO2 separation at high temperatures and pressures, showing a stable performance at 180 degrees C for at least seven days. Outstanding separation values are 328 GPU of H-2 and a H-2/CO2 selectivity of 18.1 at 180 degrees C and 6 bar feed without transmembrane pressure. These membranes, also measurable without sweep gas, are highly suitable for industrial application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled deposition of MOFs by dip-coating in thin film nanocomposite membranes for organic solvent nanofiltration

  • Sarango, Lilian
  • Paseta, Lorena
  • Navarro, Marta
  • Zornoza, Beatriz
  • Coronas, Joaquín
ZIF-8 and ZIF-67 particles, with sizes of 70 ± 10 nm and 240 ± 40 nm, respectively, were deposited by dip-coating on top of polyimide P84® asymmetric supports. In the best conditions, this gives rise to a MOF (metal-organic framework) monolayer which remains on the polyimide support during the interfacial polymerization of polyamide carried out to produce a thin film nanocomposite membrane for organic solvent nanofiltration (OSN). This method is simple, shorter and is environmentally friendly, since no excess MOF is lost during the interfacial polymerization, exhibiting good OSN results: dye rejection of 90% together with a high methanol permeance of 8.7 L m-2 h-1 bar-1.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of CO2/CH4 separation performances of 6FDA-based co-polyimides mixed matrix membranes embedded with UiO-66 nanoparticles

  • Zamidi Ahmad, M.
  • Navarro, M.
  • Lhotka, M.
  • Zornoza, B.
  • Téllez, C.
  • Fila, V.
  • Coronas, J.
Metal-organic frameworks (MOFs) incorporation into mixed matrix membranes (MMMs) is gaining more attention due to the combined advantages of high separation performance and easy processability. Nanoparticles (NPs) of CO2-philic MOF UiO-66 (Zr-BDC) were synthesized with high surface area and ca. 50 nm particle size (and also for comparison with 100 and 200 nm sizes). They were incorporated into three 6FDA-based co-polyimides (namely 6FDA-BisP, 6FDA-ODA, and 6FDA-DAM), forming MMMs with loadings in the 4–23 wt% range. The NPs and MMMs were characterized accordingly by XRD, BET, SEM, TEM, FTIR, and TGA. CO2 and CH4 isotherms on the NPs were measured by a static volumetric method at the pressure up to 10 bar. Fractional free volume (FFV) was calculated using solid density, measured by pycnometer. Gas separation performance was evaluated using a feed composition of 50%:50% CO2:CH4 binary mixture at 35 °C and a pressure difference of 2 bar. The presence of UiO-66 NPs in the continuous 6FDA-BisP and 6FDA-ODA co-polyimides improved both CO2 permeability and CO2/CH4 selectivity by 50–180% and 70–220%, respectively. In the case of 6FDA-DAM MMMs, the CO2 permeability was significantly improved by 92%, while maintaining the CO2/CH4 selectivity. The best results in terms of CO2/CH4 selectivity were 41.9 for 6FDA-BisP (17 wt% filler loading, 108 Barrer of CO2), 57.0 for 6FDA-ODA (7 wt% filler loading, 43.3 Barrer of CO2) and 32.0 for 6FDA-DAM (8 wt% filler loading, 1728 Barrer of CO2).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

New strategies based on microfluidics for the synthesis of metal-organic frameworks and their membranes

  • Echaide-Górriz, C.
  • Clément, C.
  • Cacho-Bailo, F.
  • Téllez, C.
  • Coronas, J.
Metal-organic frameworks (MOFs) are highly porous crystalline materials formed by the coordination of organic ligands with metal clusters. Despite the significant progress in their development over the last few years and their applications in various classic and emerging fields, the control of their shape and size remains a challenge, in particular the search for more efficient and environmentally friendly syntheses. In this context, the microfluidics approach allows not only the continuous production of MOFs but also an accurate reaction parameter control in their synthesis, representing a step towards intensification, versatility and scalability in the use of MOFs. Microfluidics also offers the possibility of synthesizing effective and defect free MOF-based hollow fiber membranes saving reactants as compared to conventional methods. This review is devoted to highlighting the multitude of synergies appearing when dealing with MOFs and microfluidics, not only in the bare synthesis of MOFs and their hierarchical structures but also when fabricating hollow fiber membranes with important applications in the separation field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of ZIF-93/11 Hybrid Nanoparticles via Post-Synthetic Modification of ZIF-93 and Their Use for H2/CO2 Separation

  • Sánchez-Laínez, J.
  • Zornoza, B.
  • Orsi, A.F.
  • Lozinska, M.M.
  • Dawson, D.M.
  • Ashbrook, S.E.
  • Francis, S.M.
  • Wright, P.A.
  • Benoit, V.
  • Llewellyn, P.L.
  • Téllez, C.
  • Coronas, J.
The present work shows the synthesis of nano-sized hybrid zeolitic imidazolate frameworks (ZIFs) with the rho topology based on a mixture of the linkers benzimidazole (bIm) and 4-methyl-5-imidazolecarboxaldehyde (4-m-5-ica). The hybrid ZIF was obtained by post-synthetic modification of ZIF-93 in a bIm solution. The use of different solvents, MeOH and N, N-dimethylacetamide (DMAc), and reaction times led to differences in the quantity of bIm incorporated to the framework, from 7.4 to 23 % according to solution-state NMR spectroscopy. XPS analysis showed that the mixture of linkers was also present at the surface of the particles. The inclusion of bIm to the ZIF-93 nanoparticles improved the thermal stability of the framework and also increased the hydrophobicity according to water adsorption results. N2 and CO2 adsorption experiments revealed that the hybrid material has an intermediate adsorption capacity, between those of ZIF-93 and ZIF-11. Finally, ZIF-93/11 hybrid materials were applied as fillers in polybenzimidazole (PBI) mixed matrix membranes (MMMs). These MMMs were used for H2/CO2 separation (at 180 °C) reaching values of 207 Barrer of H2 and a H2/CO2 selectivity of 7.7 that clearly surpassed the Robeson upper bound (corrected for this temperature).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Homogeneous thin coatings of zeolitic imidazolate frameworks prepared on quartz crystal sensors for CO2 adsorption

  • Sarango, Lilian
  • Benito, Javier
  • Gascón, Ignacio
  • Zornoza, Beatriz
  • Coronas, Joaquín
Thin films of four zeolitic-imidazolate frameworks (ZIF-8, ZIF-67, ZIF-7, and ZIF-93) have been fabricated by a dip-coating method on glass and quartz crystal microbalance (QCM) substrates. Homogeneous coatings with sizes of crystals of 65 ± 20, 285 ± 96, 61 ± 20 and 72 ± 21 nm for ZIF-8, ZIF-67, ZIF-7, and ZIF-93, respectively, were obtained. Upon characterization of the ZIFs and coatings by XRD, TGA, SEM, FTIR, contact angle measurement and N2 adsorption, the coatings were exposed to vapors of dichloromethane for activation. The CO2 adsorption of the coatings was then studied using a QCM device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Simultaneous use of MOFs MIL-101(Cr) and ZIF-11 in thin film nanocomposite membranes for organic solvent nanofiltration

  • Echaide-Górriz, Carlos
  • Navarro, Marta
  • Téllez, Carlos
  • Coronas, Joaquín
The MOFs Cr carboxylate MIL-101(Cr) and Zn imidazolate ZIF-11 have different chemical and textural properties. These properties have been combined to prepare thin film nanocomposite (TFN) membranes for organic solvent nanofiltration (OSN) with the two MOFs simultaneously embedded in the same membrane. The TFN membrane containing only ZIF-11 permeated faster than that with only MIL-101(Cr) when filtering sunset yellow (SY) (4.9 L m-2 h-1 bar-1) and acridine orange (AO) (3.2 L m-2 h-1 bar-1), although MIL-101(Cr) alone gave rise in both cases to better rejections (above 90%). The combination of the two MOFs led to a versatile TFN membrane that showed an intermediate performance that improved the rejections given by the TFN membrane synthesized with ZIF-11 and the permeances corresponding to the TFN membrane synthesized with MIL-101(Cr). The effect of the temperature on the TFN membranes designed for this work has also been studied, obtaining apparent activation energies of 13.2 ± 2.1 and 8.3 ± 1.1 kJ mol-1 for the OSN of pure methanol and SY-methanol, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of growth of MOF MIL-68(Al) thin films on porous alumina tubes using different linking agents

  • Perea-Cachero, A.
  • Calvo, P.
  • Romero, E.
  • Téllez, C.
  • Coronas, J.
The preparation of MIL-68(Al) films on the inner surface of alumina tubes is reported. As the direct deposition of the MOF on bare alumina gives poor adhesion results, three different linking agents are employed to achieve a good MOF–support interaction. Colloidal silica LUDOX®, zeolite silicalite-1, and natural polysaccharide chitosan are chosen as binders, because they contain potential functional groups (hydroxy, amino, ether), which can establish hydrogen bonds. While colloidal silica leads to noncontinuous MOF layers, silicalite-1 and chitosan give rise to uniform and well-anchored films, as confirmed by the different characterization techniques used to study the MOF layer. Single-gas permeation experiments are carried out to determine the quality and ideal efficiency of the membranes prepared with silicalite-1 and chitosan. The results for the MIL-68(Al)/silicalite-1 membranes evidence the existence of macrodefects. However, no cracks are found when chitosan is used as a linking agent, and the gas flow through the MIL-68(Al)/chitosan membranes clearly follows Knudsen diffusion.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Asymmetric polybenzimidazole membranes with thin selective skin layer containing ZIF-8 for H2/CO2 separation at pre-combustion capture conditions

  • Sánchez-Laínez, J.
  • Zornoza, B.
  • Téllez, C.
  • Coronas, J.
This work addresses an optimization in the fabrication of flat PBI membranes containing ZIF-8 nanoparticles for gas separation purposes. The PBI membranes were prepared in an asymmetric configuration on P84® supports, representing a new way of preparing flat PBI membranes. An optimization of the conditions for the PBI phase inversion preparation method, including the dope composition (in the 15–26 wt% range), has been carried out to obtain PBI membranes with a 1 µm selective skin layer. The asymmetric membranes showed an unprecedented gas separation capacity in pre-combustion CO2 capture, much superior to that of dense membranes, under harsh operating conditions (250 °C and 6 bar feed), performing up to 20.3 GPU of H2 and a H2/CO2 selectivity of 35.6. Their much thinner selective layer made possible the increase in selectivity because of the saturation of the CO2 flow at high pressures. The reduction in the amount of ZIF-8 for obtaining a membrane with the same filler loading (3.7 vs. 9.3 g/m2) was also possible; the performance of this ZIF-8 containig membrane was 22.4 GPU of H2 and a H2/CO2 selectivity of 22.3. The activation energy of the membranes, as well as the flow resistances, were calculated, providing a resistance in series model to understand the flow inside the membrane.