Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gas separation with mixed matrix membranes obtained from MOF UiO-66-graphite oxide hybrids

  • Castarlenas, S.
  • Téllez, C.
  • Coronas, J.
UiO-66-GO hybrids were obtained by hydrothermal synthesis of MOF UiO-66 (a Zr terephthalate) on graphite oxide (GO). These hybrids with appropriate texture and presence of nanosized MOF particles (in the ca. 30–100 nm range) have been used as fillers to prepare mixed matrix membranes (MMMs) with two different polymers, polysulfone (PSF) and polyimide (PI), as the matrixes, with contents varying between 0 and 32 wt%. The MMMs were applied to the separation of H2/CH4 and CO2/CH4 mixtures at different temperatures (35, 60 and 90 °C). Besides finding a good filler-polymer interaction, in the particular case of the hybrid filler, the barrier effect of the GO and the microporosity of the MOF dominated the separation properties of the MMMs. In all cases (different MMMs and separation mixtures) the effect of the temperature was to increase the permeability with a simultaneous decrease in the corresponding selectivity. In terms of permselectivity, the best H2/CH4 separation results were obtained (at 35 °C) with a PI based MMM containing only UiO-66 as filler (H2 permeability of 73 Barrer and H2/CH4 selectivity of 151), while a hybrid UiO-66-GO filler produced the best CO2/CH4 performance (CO2/CH4 selectivity value of 51 at 21 Barrer of CO2), also using a PI polymer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural characterization of Graphene Oxide and Reduced Graphene Oxide used as counter electrode in flexible DSSC

  • Hurtado-Morales, M.
  • Pazos-Alonso, J.E.
  • Garcia-Fox, M.A.
  • Castarlenas, S.
  • Tellez, C.
  • Coronas, J.
Graphene oxide (GO) and reduced graphene oxide (RGO) were synthesized from commercial graphite GR5 type, using the oxidative exhaustive exfoliation method or Hummers process. The characterization of GO and RGO allows ensuring the successful oxidation and reduction processes. Thin films of these materials were prepared and their electric properties were checked. The sheet resistance for GO films was 0.028 k}}W \mathbf{sq} {mathbf{-1}}on polyethylene terephthalate (PET) substrate, and 0.160 k}W \mathbf{sq} {mathbf{-1}}on soda lime glass (SLG) substrate. When RGO was used sheet resistance response increase to 0.391 k}W \mathbf{sq} {mathbf{-1}}on PET substrate and 0.413 k}W \mathbf{sq} {mathbf{-1}} on glass substrate. RGO and GO thin films were prepared by blade coating technique and used to prepare Dye Sensitized Solar Cells (DSSC) or Gr\{a}tzel cells acting as counter electrodes, being a ruthenium complex as dye and iodide-triiodide electrolyte as couple redox. In standard illumination conditions the efficiency was measured with different dye concentration. The best results were found for a dye sensitized solar cell device PET/GO, with photovoltaic performance (PV)}h = 0.25% (one TDBR coat) and for a DSSC device PET/RGO}h = 0.20% (three TDBR coats).