Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifunctional hybrid organosiliceous catalysts for aldol condensation-hydrogenation tandem reactions of furfural in continuous-flow reactor

  • Hernández-Soto, M.C.
  • Erigoni, Andrea
  • Segarra, C.
  • Gianotti, E.
  • Miletto, I.
  • Pera-Titus, M.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] A series of organic-inorganic hybrid bifunctional organosiliceous catalysts with accessible pendant amine groups as single basic sites (such as propylamine, diethylamine, pyrrolidine) and Pd nanoparticles was prepared from suitable synthesis processes. Pd/MCM-41 silica decorated with propylamine groups was highly active and selective for the single-reactor tandem aldol condensation/crotonization reaction between furfural with methyl isobutyl ketone, followed by hydrogenation, to access renewable biosolvent and biofuel precursors in the branched alkane range at mild temperature (80¿100 ºC). The catalyst was characterized in detail using XRD, C and N elemental analysis, ICP-OES, TGA/DTA, HR-TEM, N2 adsorption/desorption at 77 K, solid-state 13C and 29Si MAS NMR and FT-IR spectroscopy CO2 as acid probe. The catalyst was robust when operated in a dual fixedbed reactor achieving steady 20 % furfural conversion for 12 h on stream with preferential formation of 1-(furan2-yl)¿ 5-methylhexan-3-one., This project has received funding from the European Union¿s Horizon 2020 research and innovation program under grant agreement N 720783-MULTI2HYCAT. AE acknowledges "La Caixa" foundation for a PhD scholarship
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acid properties of organosiliceous hybrid materials based on pendant (fluoro)aryl-sulfonic groups through a spectroscopic study with probe molecules

  • Erigoni, Andrea
  • Paul, Geo
  • Meazza, Marta
  • Hernández Soto, María Consuelo
  • Miletto, Ivana
  • Rios, Ramon
  • Marchese, Leonardo
  • Raja, Robert
  • Gianotti, Enrica
  • Segarra-Almela, Mª De La Candelaria
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Two different heterogeneous catalysts carrying aryl-sulfonic moieties, in which the aromatic ring was either fluorinated or not, were successfully synthesized. The multi-step synthetic approaches implemented involved the synthesis of the silyl-derivative, template-free one-pot co-condensation (at low temperature and neutral pH) and tethering reaction. A multi-technique approach was implemented to characterize the hybrid organic-inorganic catalysts involving TGA, N-2 physisorption analysis, FTIR spectroscopy, and ss MAS NMR (H-1, C-13, Si-29) spectroscopy. Specifically, the acidity of the organosiliceous hybrid materials was studied through the adsorption of probe molecules (i.e. CO at 77 K and NH3 and TMPO at room temperature) and a combination of FTIR and ss MAS NMR spectroscopy. The catalytic activity of the two hybrids was tested in the acetal formation reaction between benzaldehyde and ethylene glycol. Preliminary results indicated superior performances for the fluoro-aryl-sulfonic acid, compared to the non-fluorinated sample. The findings hereby reported open new avenues for the design of heterogeneous sulfonic acids with superior reactivity in acid-catalyzed reactions. Moreover, through the implementation of spectroscopic studies, using probe molecules, it was possible to investigate in detail the acidic properties of hybrid organosiliceous materials., AE acknowledge "la Caixa" foundation for the PhD scholarship. The authors are grateful for financial support from the European Union by the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no. 720783.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous Silica-Based Organic-Inorganic Hybrid Catalysts: A Review

  • Erigoni, Andrea
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Hybrid organic-inorganic catalysts have been extensively investigated by several research groups in the last decades, as they allow combining the structural robust-ness of inorganic solids with the versatility of organic chemistry. Within the field of hybrid catalysts, synthetic strategies based on silica are among the most exploitable, due to the convenience of sol-gel chemistry, to the array of silyl-derivative precursors that can be synthesized and to the number of post-synthetic functionalization strategies available, amongst others. This review proposes to highlight these advantages, firstly describing the most common synthetic tools and the chemistry behind sol-gel syntheses of hybrid catalysts, then presenting exemplificative studies involving mono- and multi-functional silica-based hybrid catalysts featuring different types of active sites (acid, base, redox). Materials obtained through different approaches are described and their properties, as well as their catalytic performances, are compared. The general scope of this review is to gather useful information for those approaching the synthesis of organic-inorganic hybrid materials, while providing an overview on the state-of-the art in the synthesis of such materials and highlighting their capacities., This research was funded by Spanish Government (MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683) and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chiral hybrid materials based on pyrrolidine building units to perform asymmetric Michael additions with high stereocontrol

  • Llopis-Perez, Sebastian
  • Garcia Fernandez, Maria Teresa
  • Cantin, A.
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic-inorganic structure, from a specific bis-silylated precursor. A fluoride sol-gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to -nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. S. Ll. thanks predoctoral fellowships from MINECO for economical support (BES-2015-072627). The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unusually Low Heat of Adsorption of CO2 on AlPO and SAPO Molecular Sieves

  • Pérez-Botella, Eduardo
  • Martínez-Franco, Raquel
  • Gonzalez-Camuñas, Nuria
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The capture of CO2 from post-combustion streams or from other mixtures, such as natural gas, is an effective way of reducing CO2 emissions, which contribute to the greenhouse effect in the atmosphere. One of the developing technologies for this purpose is physisorption on selective solid adsorbents. The ideal adsorbents are selective toward CO2, have a large adsorption capacity at atmospheric pressure and are easily regenerated, resulting in high working capacity. Therefore, adsorbents combining molecular sieving properties and low heats of adsorption of CO2 are of clear interest as they will provide high selectivities and regenerabilities in CO2 separation process. Here we report that some aluminophosphate (AlPO) and silicoaluminophosphate (SAPO) materials with LTA, CHA and AFI structures present lower heats of adsorption of CO2 (13¿25 kJ/mol) than their structurally analogous zeolites at comparable framework charges. In some cases, their heats of adsorption are even lower than those of pure silica composition (20¿25 kJ/mol). This could mean a great improvement in the regeneration process compared to the most frequently used zeolitic adsorbents for this application while maintaining most of their adsorption capacity, if materials with the right stability and pore size and topology are found., We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via projects Multi2HYcat (EU-Horizon 2020 funded project under grant agreement no. 720783), Program Severo Ochoa SEV-2016-0683 and RTI2018-101033-B-I00 and also Fundacion Ramon Areces for funding through a research contract (CIVP18A3908). EP-B thanks the MCIU for his grant (FPU15/01602). NG-C thanks MCIU for her grant (BES-2016-078178).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Expandable Layered Hybrid Materials Based on Individual 1D Metalorganic Nanoribbons

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Different metalorganic lamellar hybrid materials based on associated nanoribbons were synthesized by the use of alkyl-benzyl monocarboxylate spacers, containing alkyl tails with variable lengths, which acted like structural growing inhibitors. These molecular agents were perpendicularly located and coordinated to aluminium nodes in the interlayer space, controlling the separation between individual structure sub-units. The hybrid materials were studied by X-ray diffraction (XRD), chemical and thermogravimetrical analysis (TGA), nuclear magnetic resonance (NMR) and infrared spectroscopy (IR), and field emission scanning electron microscopy (FESEM)/transmission electron microscopy (TEM), showing their physicochemical properties. The specific capacity of the metalorganic materials to be exfoliated through post-synthesis treatments, using several solvents due to the presence of 1D structure sub-units and a marked hydrophobic nature, was also evidenced., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no.720783.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly active hybrid mesoporous silica-supported base organocatalysts for C-C bond formation

  • Erigoni, Andrea
  • Hernández Soto, María Consuelo
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Segarra-Almela, Mª De La Candelaria
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] New base hybrid catalysts, based on silyl-derivatives of molecules carrying amino, diamino, pyrrolidine, pyrazolium and imidazolium functionalities have been successfully achieved through post synthetic grafting onto M41S-type support. Different characterization techniques were implemented to study the characteristics of the materials, such as elemental analysis, solid state MAS NMR and FTIR spectroscopies, X-ray diffraction (XRD), thermogravimetric and differential thermal analyses (TGA-DTA) and textural properties through N-2 physisorption analysis. The catalytic activity and recyclability of these compounds as base catalysts was demonstrated for C-C bond forming reactions such as Knoevenagel condensations and Michael additions rationalizing the differences observed as function of the reaction mechanisms. An enamine mechanism was proposed for Knoevenagel condensations and an enolate mechanism for Michael additions., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence ProgramSEV-2016-0683. The authors thank the MULTY2HYCAT (EUHorizon 2020 funded project under grant agreement no. 720783). A. E. acknowledges "La Caixa" foundation for PhD scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elucidation of the Interaction Mechanism between Organic Chiral Cages with Biomolecules through Nuclear Magnetic Resonance and Theoretical Studies

  • Saez-Ferre, Sara
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A multinuclear NMR has been carried out to elucidate the mechanism of action of CC3-R box-type chiral materials for the separation of enantiomers, supported by theoretical calculations. The potential of these materials to be used as chiral resolution agents through NMR is evidence in this study., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. thanks MEC for his Ramon y Cajal contract RYC-2014-16620. M.B. and F.R. thank the financial support by the Spanish Government (MAT2017-82288-C2-1-P and MAT2015-71842-P). The authors thank the MULTY2-HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic subdomains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electronwithdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/ Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Framework Topology on the Reactivity of Chiral Pyrrolidine Units Inserted in Different Porous Organosilicas

  • Llopis-Perez, Sebastian
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Three families of organosiliceous materials with different structuration level, order, and textural properties (non-ordered, M41S, and SBA-15 type materials) were prepared incorporating in their structural framework chiral pyrrolidine units with variable content. Likewise, non-ordered mesoporous hybrid solids were obtained through a sol-gel process in a fluoride medium, while M41S and SBA-15 type materials were obtained through micellar routes in the presence of long-chain neutral surfactants or block copolymers. Thanks to appropriate characterization studies and catalytic tests for the Michael addition between butyraldehyde and beta-nitrostyrene, we showed how the void shapes and sizes present in the structure of hybrid materials control the diffusion of reactants and products, as well as confine transition states and reactive intermediates. The best catalytic results, considering activity and enantioselectivity, were achieved in the presence of a non-ordered material, NOH-Pyr-5%, which exhibited the highest Brunauer-Emmett-Teller (BET) area, with a 96% yield and a 82% ee for the Michael adduct., This research was funded by the Spanish Government(MAT2017-82288-C2-1-P), Severo Ochoa Excellence Program (SEV-2016-0683), and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). S. Ll. is thankful for the predoctoral fellowship from MINECO for financial support (BES-2015-072627).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Organic-Inorganic Hybrid Catalysts for Chemical Processes of Industrial Interest

  • Erigoni, Andrea
[ES] El trabajo de investigación descrito en la presente Tesis Doctoral ha sido desarrollado en el marco del proyecto europeo MULTI2HYCAT (grant agreement N. 720783) y se ha centrado en la síntesis y caracterización de materiales mono- y multi-funcionales que presentan sitios catalíticos ácidos, básicos o redox. Diferentes líneas de investigación han sido desarrolladas en paralelo para obtener distintos materiales híbridos que serán empleados en diferentes procesos catalíticos, en línea con las necesidades de los socios industriales del proyecto. Debido a la naturaleza colaborativa del proyecto, cada miembro académico se ha en-centrado en un aspecto del desarrollo de los materiales. Es por ello que el Instituto de Tecnología Química (ITQ-CSIC), donde se ha llevado a cabo esta Tesis Doctoral, se ha centrado en la síntesis de los catalizadores híbridos. Por ello, parte de la caracterización descrita en el Capítulo 3 se ha llevado a cabo en la Università del Piemonte Orientale (IT), durante una estancia de un mes. Ademas, algúnos resultados catalíticos descritos en los Capítulos 3 y 5 han sido obtenidos por la University of Southampton (UK). En el Capítulo 3, se ha descrito la síntesis de dos catalizadores heterogéneos híbridos que presentan moléculas de ácido aril-sulfónico en su composición. En uno de ellos, el anillo aromático presentará átomos de flúor en posición 2, 3, 5, 6. Se han llevado a cabo dos estrategias de síntesis multi-etapas, a través de la síntesis de los precursores alkoxi-silanos, a través de procesos de condensación junto a un precursor de sílice (en ausencia de agentes directores de estructura, a pH neutro y temperaturas bajas) y de una reacción de tethering. Los materiales híbridos han sido caracterizados a través de dife-rentes técnicas. Las propiedades texturales, la estabilidad térmica y la composición química de los catalizadores ha sido estudiada. Además, moléculas sondas han sido adsorbidas en los materiales hibridos y las interacciones entre ellos han sido estudiadas a través de espectroscopias FTIR y RMN multi-nuclear. El catalizador hibrido en que el anillo aromático estaba fluorado resultó ser el más activo catalíticamente en la reac-ción de formación de acetal entre benzaldehído y etilenglicol. Una versión de los hí-bridos en que la superficie había sido pasivada con grupos metilos también fue obteni-da. Las propiedades de los materiales híbridos pasivados fueron comparadas, para po-der estudiar el efecto de la polaridad de la superficie del soporte sobre la actividad catalítica. En el Capítulo 4 se describe la síntesis de órgano-catalizadores híbridos obtenidos por anclaje de precursores de silicio funcionalizados con grupos básicos sobre un soporte del tipo MCM-41. Los catalizadores han sido caracterizados y empleados en diferentes reacciones de formación de enlaces C-C, como la condensación de Knoevenagel y la adición de Michael. Los catalizadores híbridos han sido empleados en la condensación entre furfural y metil isobutil cetona. El catalizador más activo ha sido seleccionado para ser funcionalizado posteriormente con nanoparticulas de paladio y empleado en un proceso catalítico en cascada. Mecanismos de reacción han sido pro-puesto para cada proceso catalítico. El efecto beneficioso debido a la presencia de los grupos silanoles en la superficie del soporte también fue analizado. En el Capítulo 5, la síntesis de catalizadores híbridos multi-funcionales fue descrita. Basándose en los resultados obtenidos en el Capítulo 4, se ha preparado un catalizador que presente grupos aminopropil- y nanopartículas de paladio. Las propiedades estructurales y texturales han sido estudiadas. Además, a través de la microscopia electrónica de transmisión, la distribución dimensional de las nanoparticulas ha sido estimada, resultando en un tamaño medio equivalente a la dimensión de los canales mesoporosos del soporte, MCM-4, [CA] El treball de recerca descrit en aquesta tesi doctoral es va desenvolupar en el marc del projecte europeu MULTI2HYCAT (grant agreement N. 720783) i se centra en la sínte-si i la caracterització de catalitzadors híbrids mono i multifuncionals amb àcid, base o redox actius llocs. S'han desenvolupat diverses línies d'investigació en paral·lel per dissenyar múltiples catalitzadors híbrids per a diferents processos catalítics, basant-se en les necessitats dels socis industrials. A causa del caràcter col·laboratiu del projecte, cada soci acadèmic es va centrar princi-palment en un aspecte de tot el procés. Institut de Tecnologia Química (ITQ-CSIC), on es va desenvolupar aquesta tesi, està principalment centrat en el disseny i síntesi de catalitzadors híbrids. Per això, part dels resultats de caracterització reportats al Capítol 3 s'han dut a terme a la Università del Piemonte Orientale (IT), durant una estada d'un mes. Alguns dels resultats catalítics reportats al Capítol 3 i al Capítol 5 han estat reali-tzats per la Universitat de Southampton (Regne Unit). En el Capítol 3, s'ha descrit la síntesi de dos catalitzadors heterogenis híbrids que pre-senten molècules d'àcid aril-sulfònic en la composició. En un d'ells, l'anell aromàtic presentarà àtoms de fluor en posició 2, 3, 5, 6. S'han dut a terme dues estratègies de síntesi multi-etapes, a través de la síntesi dels precursors alkoxi-silans, mitjançant pro-cessos de condensació al costat d'un precursor de sílice (en absència d'agents directors d'estructura, a pH neutre i temperatures baixes) i d'una reacció de tethering. Els mate-rials híbrids han estat caracteritzats mitjançant diferents tècniques. Les propietats texturals, l'estabilitat tèrmica i la composició química dels catalitzadors ha sigut estudiada. A més, molècules sondes han estat adsorbides en els materials híbrids i les interaccions entre ells han estat estudiades mitjançant espectroscòpies FTIR i RMN multi-nuclear. El catalitzador híbrid en que l'anell aromàtic estava fluorat va resultar ser el més actiu catalíticament en la reacció de formació d'acetal entre benzaldehid i etilenglicol. Una versió dels híbrids en que la superfície havia estat pasivada amb grups metilos també va ser obtinguda. Les propietats dels materials híbrids passivats van ser comparades, per poder estudiar l'efecte de la polaritat de la superfície del suport sobre l'activitat catalítica. En el Capítol 4 es descriu la síntesi d'organo-catalitzadors híbrids obtinguts per ancoratge de precursors de silici funcionalitzats amb grups bàsics sobre un suport del tipus MCM-41. Els catalitzadors han estat caracteritzats i empleats en diferents reaccions de formació d'enllaços C-C, com la condensació de Knoevenagel i l'addició de Michael. Finalment, els catalitzadors híbrids han estat emprats en la condensació entre furfural i metil isobutil cetona. El catalitzador més actiu ha estat seleccionat per a ser funcionalitzat posteriorment amb nanoparticules de pal·ladi i emprat en un procés catalític en cascada. Mecanismes de reacció han estat proposat per a cada procés catalític. L'efecte beneficiós a causa de la presència dels grups silanols en la superfície de suport també va ser analitzat. En el Capítol 5, la síntesi de catalitzadors híbrids multi-funcionals va ser descrita. Basant-se en els resultats obtinguts en el Capítol 4, s'ha preparat un catalitzador que presenti grups aminopropil- i nanopartícules de palladi. Les propietats estructurals i texturals han estat estudiades. A més, a través de la microscòpia electrònica de trans-missió, la distribució dimensional de les nanoparticulas ha estat estimada, resultant en una grandària mitjana equivalent a la dimensió dels canals mesoporosos del suport, MCM-41. El material ha estat emprat com a catalitzador multi-funcional., [EN] The research work described in this Doctoral Thesis was developed within the frame of the MULTI2HYCAT European Project (grant agreement N. 720783) and it is focused on the synthesis and characterization of mono- and multi-functional hybrid catalysts featuring acid, base or redox active sites. Several research lines have been developed in parallel to design multiple hybrid catalysts for different catalytic processes, building upon the needs of the industrial partners. Due to the collaborative nature of the project, each academic partners mainly focused on one aspect of the whole process. Instituto de Tecnología Química (ITQ-CSIC), where this Thesis was developed, mostly focused on the design and synthesis of the hybrid catalysts. For that, part of the characterization results reported in Chapter 3 have been carried out at Università del Piemonte Orientale (IT), during a one month stay. Some of the catalytic results reported in Chapter 3 and Chapter 5 have been car-ried out by the University of Southampton (UK). In Chapter 3 the synthesis of two different heterogeneous hybrid catalysts carrying aryl-sulfonic moieties, in which the aromatic ring was either fluorinated or not, is re-ported. Two multi-step synthetic approaches were developed, involving the synthesis of the silyl-derivative precursor, template-free one-pot co-condensation (at low tem-perature and neutral pH) and tethering reaction. A multi-technique approach was im-plemented to characterize the hybrid catalysts. Textural properties, thermal stability and chemical makeup of the materials were studied. Moreover, probe molecules were adsorbed onto the hybrids and the interaction were studied with multi-nuclear NMR and FTIR spectroscopies. The catalytic activity of the two hybrids showed superior performances for the fluoro-aryl-sulfonic acid, compared to the non-fluorinated mate-rial, in the acetal formation between benzaldehyde and ethylene glycol. Silanol-capped versions of the hybrids have also been prepared and their properties have been com-pared with those of hydrophilic hybrids, to study the effect of the polarity of the sur-face on the overall catalytic activity of the hybrids. In Chapter 4, the synthesis of hybrid mesoporous organocatalysts, obtained by graft-ing of commercial and custom-made silyl-derivatives onto MCM-41 supports, is re-ported. The hybrid catalysts were characterized and tested for different reactions in-volving C-C bond formation, such as Knoevenagel condensations and Michael addi-tion. Finally, the catalysts were tested in the condensation between furfural and methyl isobutyl ketone and the most performing catalyst was selected for the synthesis of a multi-functional hybrid. Reaction mechanisms have been proposed and the beneficial effect of the surface silanol groups on the catalytic activity was demonstrated. In Chapter 5, the synthesis of hybrid multi-functional catalysts is reported. Building upon the results reported in Chapter 4, a hybrid catalyst featuring aminopropyl moie-ties and palladium nanoparticles was developed. Structural and textural properties of the catalysts were accessed. Moreover, transmission electron microscopy showed a narrow nanoparticles distribution, centered a value equivalent to the size of the meso-porous channels of the support. The catalyst was tested in a tandem process involving the aldol condensation between furfural and methyl isobutyl ketone followed by hy-drogenation of the aldol adduct. The influence of several variables on the activity of the multi-functional catalyst was explored, with the scope of paving the way for more thorough studies to be carried out in flow regime. Lastly, proof-of-concept syntheses of multi-functional hybrid catalysts featuring base sites and supported metal complex are reported., The research work described in this Doctoral Thesis was developed within the frame of the MULTI2HYCAT European Project (grant agreement N. 720783). I would like to thank la Caixa foundation for my PhD scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Base Hybrid Organosilica Materials based on Pyrrolidine Builder Units for Fine Chemicals Production

  • Llopis-Perez, Sebastian
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The catalytic activity of "pyrrolidine type" fragments included or anchored in the mesoporous silica supports or polymeric frameworks have been fully reported for enantioselective transformation. Nevertheless, low attention was focused on their catalytic abilities to perform base-catalyzed reaction. Accordingly, hybrid materials including pyrrolidine fragments in the mesoporous silica supports were prepared following different synthesis methods, such as micellar and fluoride sol-gel routes in absence of structural directing agents. Their great catalytic performance was explored for various base-catalyzed reactions to the formation of C-C bond through Knoevenagel, Claisen-Schmidt and Henry condensations under microwave irradiation. The benefits of microwave irradiation combined with suitable catalytic properties of pyrrolidine hybrid materials with strong base sites and high accessibility to active centers, allowed carrying out successfully base-catalyzed condensation reactions for the production of fine chemicals. Moreover, the hybrid catalyst exhibited high selectivity and good stability over different catalytic cycles contributing to environmental sustainability., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P and PID2020112590GB C21/AEI/10.13039/501100011033, and MULTY2HYCAT European project (EUHorizon 2020 funded project under grant agreement no. 720783).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral Hybrid Materials Based on Pyrrolidine Builder Units to Perform Asymmetric Michael Additions with High Stereocontrol

  • Llopis, Sebastián
  • García Ramón, María Teresa
  • Cantín, Ángel
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic–inorganic structure, from a specific bis-silylated precursor. A fluoride sol–gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to β-nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288- C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno, José María
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic sub-domains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electron-withdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the framework topology on the reactivity of chiral pyrrolidine units inserted in different porous organosilicas

  • Llopis, Sebastián
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
Three families of organosiliceous materials with different structuration level, order, and textural properties (non-ordered, M41S, and SBA-15 type materials) were prepared incorporating in their structural framework chiral pyrrolidine units with variable content. Likewise, non-ordered mesoporous hybrid solids were obtained through a sol-gel process in a fluoride medium, while M41S and SBA-15 type materials were obtained through micellar routes in the presence of long-chain neutral surfactants or block copolymers. Thanks to appropriate characterization studies and catalytic tests for the Michael addition between butyraldehyde and β-nitrostyrene, we showed how the void shapes and sizes present in the structure of hybrid materials control the diffusion of reactants and products, as well as confine transition states and reactive intermediates. The best catalytic results, considering activity and enantioselectivity, were achieved in the presence of a non-ordered material, NOH-Pyr-5%, which exhibited the highest Brunauer-Emmett-Teller (BET) area, with a 96% yield and a 82% ee for the Michael adduct., This research was funded by the Spanish Government (MAT2017-82288-C2-1-P), Severo Ochoa Excellence Program (SEV-2016-0683), and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). S. Ll. is thankful for the predoctoral fellowship from MINECO for financial support (BES-2015-072627).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Expandable layered hybrid materials based on individual 1D metalorganic nanoribbons

  • Moreno, J.M.
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
Different metalorganic lamellar hybrid materials based on associated nanoribbons were synthesized by the use of alkyl-benzyl monocarboxylate spacers, containing alkyl tails with variable lengths, which acted like structural growing inhibitors. These molecular agents were perpendicularly located and coordinated to aluminium nodes in the interlayer space, controlling the separation between individual structure sub-units. The hybrid materials were studied by X-ray diffraction (XRD), chemical and thermogravimetrical analysis (TGA), nuclear magnetic resonance (NMR) and infrared spectroscopy (IR), and field emission scanning electron microscopy (FESEM)/transmission electron microscopy (TEM), showing their physicochemical properties. The specific capacity of the metalorganic materials to be exfoliated through post-synthesis treatments, using several solvents due to the presence of 1D structure sub-units and a marked hydrophobic nature, was also evidenced., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no.720783. We gratefully acknowledge the micrographs obtained in the Servicio de Microscopía (Universitat Politècnica de València).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active hybrid mesoporous silica-supported base organocatalysts for C[sbnd]C bond formation

  • Erigoni, Andrea
  • Hernández-Soto, M.Consuelo
  • Rey García, Fernando
  • Segarra, Candela
  • Díaz Morales, Urbano
New base hybrid catalysts, based on silyl-derivatives of molecules carrying amino, diamino, pyrrolidine, pyrazolium and imidazolium functionalities have been successfully achieved through post synthetic grafting onto M41S-type support. Different characterization techniques were implemented to study the characteristics of the materials, such as elemental analysis, solid state MAS NMR and FTIR spectroscopies, X-ray diffraction (XRD), thermogravimetric and differential thermal analyses (TGA-DTA) and textural properties through N physisorption analysis. The catalytic activity and recyclability of these compounds as base catalysts was demonstrated for C[sbnd]C bond forming reactions such as Knoevenagel condensations and Michael additions rationalizing the differences observed as function of the reaction mechanisms. An enamine mechanism was proposed for Knoevenagel condensations and an enolate mechanism for Michael additions., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence ProgramSEV-2016-0683. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). A. E. acknowledges “La Caixa” foundation for PhD scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acid properties of organosiliceous hybrid materials based on pendant (fluoro)aryl-sulfonic groups through a spectroscopic study with probe molecules

  • Erigoni, Andrea
  • Paul, G.
  • Meazza, Marta
  • Hernández-Soto, M.Consuelo
  • Miletto, I.
  • Rios, Ramon
  • Segarra, Candela
  • Marchese, Leonardo
  • Raja, R.
  • Rey García, Fernando
  • Gianotti, E.
  • Díaz Morales, Urbano
Two different heterogeneous catalysts carrying aryl-sulfonic moieties, in which the aromatic ring was either fluorinated or not, were successfully synthesized. The multi-step synthetic approaches implemented involved the synthesis of the silyl-derivative, template-free one-pot co-condensation (at low temperature and neutral pH) and tethering reaction. A multi-technique approach was implemented to characterize the hybrid organic-inorganic catalysts involving TGA, N physisorption analysis, FTIR spectroscopy, and ss MAS NMR (H, C, Si) spectroscopy. Specifically, the acidity of the organosiliceous hybrid materials was studied through the adsorption of probe molecules (i.e. CO at 77 K and NH and TMPO at room temperature) and a combination of FTIR and ss MAS NMR spectroscopy. The catalytic activity of the two hybrids was tested in the acetal formation reaction between benzaldehyde and ethylene glycol. Preliminary results indicated superior performances for the fluoro-aryl-sulfonic acid, compared to the non-fluorinated sample. The findings hereby reported open new avenues for the design of heterogeneous sulfonic acids with superior reactivity in acid-catalyzed reactions. Moreover, through the implementation of spectroscopic studies, using probe molecules, it was possible to investigate in detail the acidic properties of hybrid organosiliceous materials., AE acknowledge “la Caixa” foundation for the PhD scholarship. The authors are grateful for financial support from the European Union by the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no. 720783.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOFs based on 1D structural sub-domains with Brønsted acid and redox active sites as effective bi-functional catalysts

  • Moreno, J.M.
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
A novel family of lamellar MOF-type materials, which contain Brønsted acid sites together with redox active centers, based on assembled 1D organic-inorganic nanoribbons were obtained through direct solvothermal synthesis routes, using specific monotopic benzylcarboxylate spacers with thiol substituents in thepara-position like structural modulator compounds and effective post-synthesis oxidized treatments to generate accessible sulfonic groups. Low-dimensional aluminum metal-organic materials, containing free sulfonic pendant groups (Al-ITQ-SOH), were successfully tested in several acid reactions, such as acetalization, esterification and ring opening of epoxides with a significant impact on fine chemistry processes. The direct introduction of stabilized Pd nanoparticles, cohabitating with pendant sulfonic groups, allowed the preparation of active bi-functional MOF-type hybrid materials (Al-ITQ-SOH/Pd) capable of carrying out one-pot two-step oxidation-acetalization reactions, exhibiting high yield and high activity during consecutive catalytic cycles., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P, the Severo Ochoa Excellence Program SEV-2016-0683, and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unusually Low Heat of Adsorption of CO2 on AlPO and SAPO Molecular Sieves

  • Perez-Botella, Eduardo
  • Martínez-Franco, Raquel
  • González-Camuñas, N.
  • Cantín, Ángel
  • Palomino, Miguel
  • Moliner Marín, Manuel
  • Valencia, Susana
  • Rey García, Fernando
We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via projects Multi2HYcat (EU-Horizon 2020 funded project under grant agreement no. 720783), Program Severo Ochoa SEV-2016-0683 and RTI2018-101033- B-I00 and also Fundación Ramón Areces for funding through a research contract (CIVP18A3908). EP-B thanks the MCIU for his grant (FPU15/01602). NG-C thanks MCIU for her grant (BES-2016-078178).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active Base Hybrid Organosilica Materials based on Pyrrolidine Builder Units for Fine Chemicals Production

  • Llopis, Sebastián
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
The catalytic activity of “pyrrolidine type” fragments included or anchored in the mesoporous silica supports or polymeric frameworks have been fully reported for enantioselective transformation. Nevertheless, low attention was focused on their catalytic abilities to perform base-catalyzed reaction. Accordingly, hybrid materials including pyrrolidine fragments in the mesoporous silica supports were prepared following different synthesis methods, such as micellar and fluoride sol-gel routes in absence of structural directing agents. Their great catalytic performance was explored for various base-catalyzed reactions to the formation of C−C bond through Knoevenagel, Claisen-Schmidt and Henry condensations under microwave irradiation. The benefits of microwave irradiation combined with suitable catalytic properties of pyrrolidine hybrid materials with strong base sites and high accessibility to active centers, allowed carrying out successfully base-catalyzed condensation reactions for the production of fine chemicals. Moreover, the hybrid catalyst exhibited high selectivity and good stability over different catalytic cycles contributing to environmental sustainability., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P and PID2020-112590GB−C21/AEI/10.13039/501100011033, and MULTY2HYCAT European project (EUHorizon 2020 funded project under grant agreement no. 720783).