Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of the injector design on the combustion noise of gasoline partially premixed combustion in a 2-stroke engine

  • Broatch, A.|||0000-0001-9991-1039
  • Margot , Xandra|||0000-0002-2639-0444
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] In this paper, a numerical Computational Fluid Dynamics (CFD) study is carried out with the purpose of understanding how the injector design may impact on the in-cylinder processes, which cause noise emission. This study is based on a combination of the gasoline partially premixed combustion concept with a new high speed direct injection 2-stroke engine, which emerges as a promising solution able to comply with nitrous oxides and particulate matter emissions standards, while ensuring combustion control and stability. The original engine configuration is varied by modifying the included spray angle and the number of injector nozzles in order to evaluate other design solutions for mitigating combustion noise. Results show that the maximum pressure time-derivative achieved during the combustion is the most influential parameter on the acoustic response of the in-cylinder noise source. However, they also evidence that for some operation conditions the resonance phenomena can enhance their contribution, thus playing a relevant role in the engine noise level. Further analysis allowed to identify three combustion related parameters, which characterise this phenomenon and allow identifying key paths to minimize its levels. (C) 2017 Elsevier Ltd. All rights reserved., The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" from the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Gomez-Soriano is partially supported by an FPI contract (FPI-S2-2016-1353) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-16)" of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal decomposition of the unsteady flow field in compression-ignited combustion chambers

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] In this paper, the unsteady behaviour of a compression-ignited (CI) engine combustion chamber is studied by analysing the results of a Computational Fluid Dynamics (CFD) model through the application of different flow decomposition techniques, aiming to resolve the underlying modal structure of the process. Experimental validation for the combustion simulation is provided, and a methodology for extracting coherent pressure information is proposed in order to provide a suitable input for different analysis methods. These range from straightforward Fourier transform techniques to more sophisticated modal decomposition approaches. In particular Proper Orthogonal Decomposition (POD) is shown to provide valuable insight into the time-spatial structure of the combustion flow field, allowing the establishment of correlations between pressure modes and physical parameters of the combustion, such as the injection timing or the chamber geometry. Dynamic Mode Decomposition (DMD) on the other hand is proven to successfully highlight the link between the frequency of the unsteady energy components and their spatial distribution within the chamber. Advantage is then taken of the modal characterization of the unsteady behaviour in the chamber to showcase how physical parameters such as the spray angle can be modified to optimize the acoustic signature of the combustion process, helping CI internal combustion engines reduce their acoustic environmental impact (C) 2017 The Combustion Institute. Published by Elsevier Inc. All rights reserved., The equipment used in this work has been partially supported by FEDER project funds "Dotacidn de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT)" [grant number FEDER-ICTS-2012-06], framed in the operational program of unique scientific and technical infrastructure of the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of gasoline and Diesel blends on combustion noise and pollutant emissions in Premixed Charge Compression Ignition engines

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Monico Muñoz, Luisa Fernanda
[EN] Research efforts in the automotive sector focus on developing new combustion concepts for mitigating the emissions of nitrous oxides and soot of conventional Diesel combustion. One of the most promising concept is the Premixed Charge Compression Ignition. In this, the fuel burns in premixed conditions, avoiding the formation of soot whereas nitrous oxides are controlled using large amounts of exhaust gas recirculation. Because of the premixed combustion, high fuel-burning velocities are produced, whence combustion noise is deteriorated. In order to mitigate this drawback, different blends of gasoline and Diesel fuels are being considered due to their suitability for this combustion characteristics. The effect of these fuel blends on emissions, performance and engine noise is analysed in this paper with the aim to provide additional knowledge of the fundamental issues of this particular combustion mode. The study also includes sweeps of both the start of injection and the amount of exhaust gas recirculation, in order to evaluate further degrees of freedom in the optimisation of the engine settings. Results show that the consideration of the engine noise together with both performance and emissions, reduces dramatically the margin of variation of the combustion settings, limiting therefore the operation range of the engine. (C) 2017 Elsevier Ltd. All rights reserved., The equipment used in this work has been partially supported by the Spanish Ministerio de Economía y Competitividad through grant no DPI2015-70464-R and by FEDER project funds Dotación de infraestructuras científico técnicas para el Centro Integral de Mejora Energética y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06) framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economía y Competitividad. J. Gomez-Soriano is partially supported through contract FPI-S2-2016-1353 of the Programa de Apoyo para la Investigación y Desarrollo (PAID-01-16) of Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of dual spray injectors for optimising the noise emission of gasoline partially premixed combustion in a 2-stroke HSDI CI engine

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] This paper evaluates the potential advantages of introducing a new injector concept with a dual set of orifices in a 2-stroke engine operating with gasoline partially premixed combustion (PPC gasoline), specially in terms of combustion noise reduction. The injector is based on a configuration with two concentric needle valves and dual actuators, which allows to switch among two independent crowns of holes. The first set of orifices is controlled by the primary needle valve while an additional needle valve manages the secondary holes crown. Moreover, both valves are coupled with the two actuators separately, providing enhanced selective control over injection with an extra degree of freedom. In this investigation, a combination of Computational Fluid Dynamics (CFD) simulations and the Design of Experiments (DoE) technique is proposed with the specific purpose of optimizing this new injector configuration. In addition to determining the most convenient design, this method is extremely useful to establish cause/effect relationships between the injection design parameters and their impact on the engine performance and emissions. Results show how this solution could increase the operating range of the PPC gasoline concept by improving the combustion stability while acoustic emissions are reduced, The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" from the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of combustion acoustic phenomena in compression-ignition engines using large eddy simulation

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Pal, P.
[EN] As computational capabilities continue to grow, exploring the limits of computational fluid dynamics to capture complex and elusive phenomena, which are otherwise difficult to study by experimental techniques, is one of the main targets for the research community. This paper presents a detailed analysis of the physical processes that lead to combustion noise emissions in internal combustion engines. In particular, diesel combustion in a compression-ignition (CI) engine is studied in order to understand the singular behavior of the in-cylinder flow field responsible for the acoustic emissions. The main objective is, therefore, to improve the understanding of the phenomena involved in CI engine noise using large eddy simulations. Several visualization methods are employed to investigate the connection between combustion behavior and its effects on the pressure field. In addition, proper orthogonal decomposition is used to analyze the modal energy distribution among all the acoustic modes. The results show that the acoustic signature is fundamentally conditioned by the intensity of the premixed combustion rather than by the pressure oscillations generated by turbulent fluctuations in the flame surface established during the diffusion stage., The submitted manuscript was created partly by UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. This research was partly funded by the U.S. DOE Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy, under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Michael Weismiller, program managers at the DOE, for their support. In addition, the authors would like to acknowledge the Laboratory Computing Resource Center (LCRC) at the Argonne National Laboratory for computing time on the Bebop cluster that was used in this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental analysis of cyclical dispersion in compression-ignited versus spark-ignited engines and its significance for combustion noise numerical modeling

  • Broatch, A.|||0000-0001-9991-1039
  • López, J. Javier|||0000-0002-9486-2511
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] As noise pollution remains one of the biggest hurdles posed by thermal engines, increasing efforts are made to alleviate the generation of combustion noise from the early design stage of the chamber. Since the complexity of both modern chamber geometries and the combustion process itself precludes robust analytic solutions, and since the resonant, highly 3D pressure field is difficult to be measured experimentally, focus is put on the numerical modelling of the process. However, in order to optimize the resources devoted to this simulation, an informed decision must be made on which formulations are followed. In this work, the experimental cyclic dispersion of the in-cylinder pressure is analyzed in two typical compression-ignited (CI) and spark-ignited (SI) engines. Acoustic signatures and pressure rise rates are derived from this data, showing how while the preponderance of flame front propagation and dependency of previous cycle in SI engine noise usually calls for multi-cycle, more complex turbulence modelling such as Large Eddy Simulation (LES), simpler Unsteady Reynolds-Averaged Navier-Stokes (URANS) formulations can accurately characterize the more consistent pressure spectra of CI thermal engines, which feature sudden autoignition as the main noise source., European Regional Development Fund (Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte, CiMeT) (FEDER-ICTS-2012-06). Programa de Apoyo para la Investigacion y Desarrollo (PAID) Universitat Politecnica de Valencia (FPI-S2-2016-1353).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the shift of acoustic characteristics of compression-ignited engines when operating with gasoline partially premixed combustion

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] As the focus of research and development is put into innovative combustion concepts with the goal of reducing harmful chemical pollutants while keeping or even improving the efficiency of conventional Diesel combustion, it is necessary to consider the impact on noise pollution brought by those innovative concepts. However, the question arises as to what extent the noise characterization and optimization strategies currently applied to conventional Diesel compression-ignited engines are applicable to these innovative combustion concepts. In this paper, we apply experimental noise characterization techniques based on pressure trace decomposition to two compression-ignited engines: a baseline conventional Diesel engine and an innovative 2-stroke engine operating with the gasoline partially premixed combustion concept. Analysis of the results reveals that the underlying physical phenomena responsible for the spectral signature of the noise are still shared between the new and the conventional concepts. However, results evince a significant change in the relevance of these physical sources, leading to necessary changes in optimization strategies for future compression-ignited engine development., The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT)" [Grant No. FEDER-ICTS-2012-06], framed in the operational program of unique scientific and technical infrastructure of the Spanish Government. J. Gomez-Soriano is partially supported through the Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia [Grant No. FPI-S2-2016-1353]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Methodology for Knocking Combustion Analysis in Compression-Ignited Advanced Concepts

  • Serrano, J.R.|||0000-0003-0692-3917
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Martínez-Hernándiz, Pablo José
[EN] In the present work, a numerical methodology based on three-dimensional (3D) computational fluid dynamics (CFD) was developed to predict knock in a 2-Stroke engine operating with gasoline Partially Premixed Combustion (PPC) concept. Single-cycle Unsteady Reynolds-Averaged Navier Stokes (URANS) simulations using the renormalization group (RNG) k - epsilon model were performed in parallel while the initial conditions are accordingly perturbed in order to imitate the variability in the in-cylinder conditions due to engine operation. Results showed a good agreement between experiment and CFD simulation with respect to cycle-averaged and deviation of the ignition timing, combustion phasing, peak pressure magnitude and location. Moreover, the numerical method was also demonstrated to be capable of predicting knock features, such as maximum pressure rise rate and knock intensity, with good accuracy. Finally, the CFD solution allowed to give more insight about in-cylinder processes that lead to the knocking combustion and its subsequent effects., The work has been partially supported by the Spanish Ministerio de Economia y Competitividad through grant number TRA2016-79185-R. The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)" from the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. In addition, J. Gomez-Soriano is partially supported by an FPI contract (FPI-S2-2016-1353) of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-16)" of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical approach for assessing combustion noise in compression-ignited Diesel engines

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Broatch, A.|||0000-0001-9991-1039
  • Gil, A.|||0000-0001-7192-6992
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
[EN] Diesel combustion noise has become a crucial aspect for the engine manufacturers due to its impact on human health and influence on the customer purchasing decision. The interaction of the pressure waves after mixture self-ignition induces cavity resonances inside the combustion chamber. This complex phenomenon produces high-frequency pressure oscillations, hence traditional in-cylinder measurements do not provide enough information to characterise the in-cylinder acoustic field. In this paper, a numerical methodology is proposed for assessing the Diesel combustion as a noise source and to overcome measurement limitations. An optimisation procedure is also presented in order to determine the numerical calculation parameters, boundary conditions definition and initialization. Results show that local flow conditions at the start of combustion have a strong influence on the acoustic response of the in-cylinder noise source. These particular conditions are only achievable by the proposed methodology which considers entire engine cycle simulations with the complete cylinder domain. Therefore, traditional Computational Fluid Dynamic (CFD) approaches, such those used for predicting combustion stability or pollutant emissions, are not suitable for reproducing the physical mechanisms of noise generation and they cannot be used for acoustic purposes. The reliability of the proposed methodology to simulate the acoustic field accurately inside the combustion chamber has been validated by comparison with experiments., The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energdtica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Gomez-Soriano is partially supported through the "Programa de Apoyo para la Investigacion y Desarrollo (PAID)" of Universitat Politecnica de Valencia [Grant No. FPI-S2-2016-1353].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Methodology for Optimization of Compression-Ignited Engines Considering Combustion Noise Control

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Pinaki, Pal
  • Som, Sibendu
[EN] It is challenging to develop highly efficient and clean engines while meeting user expectations in terms of performance, comfort and drivability. One of the critical aspects in this regard is combustion noise control. Combustion noise accounts for about 40 percent of the overall engine noise in typical turbocharged diesel engines. The experimental investigation of noise generation is difficult due to its inherent complexity and measurement limitations. Therefore, it is important to develop efficient numerical strategies in order to gain a better understanding of the combustion noise mechanisms. In this work, a novel methodology was developed, combining computational fluid dynamics (CFD) modeling and genetic algorithm (GA) technique to optimize the combustion system hardware design of a high-speed direct injection (HSDI) diesel engine, with respect to various emissions and performance targets including combustion noise. The CFD model was specifically set up to reproduce the unsteady pressure field inside the combustion chamber, thereby allowing an accurate prediction of the acoustic response of the combustion phenomena. The model was validated by simulating several steady operating conditions and comparing the numerical results against experimental data, in both temporal and frequency domains. Thereafter, a GA optimization was performed with the goal of minimizing indicated specific fuel consumption (ISFC) and combustion noise, while restricting pollutant (soot and NOx) emissions to their respective baseline values. Eight design variables were selected pertaining to piston bowl geometry, nozzle inclusion angle, number of injector nozzle holes and in-cylinder swirl. An objective merit function based on the emissions, ISFC and combustion noise, was constructed to quantify the strength of the engine designs, and was determined using the CFD model as the function evaluator. The in-cylinder noise level was characterized by the total resonance energy of local pressure oscillations. The optimum engine configuration thus obtained, showed a significant improvement in terms of efficiency and combustion noise compared to the baseline system, along with both soot and NOx emissions within their respective constraints. This optimum configuration included a deeper and tighter bowl geometry with higher swirl and larger number of nozzle holes. Subsequently, a more detailed acoustics analysis based on proper orthogonal decomposition (POD) technique was carried out to further explore the combustion noise benefits achieved by the GA optimum. This computational study is a first of its kind (to the best of the authors¿ knowledge), which demonstrates a comprehensive framework to incorporate combustion noise into a numerical optimization strategy for engine design., The equipment used in this work was partially supported by FEDER and the Spanish Government through grant no. DPI2015-70464-R and by Fondo Europeo de Desarrollo Regional (FEDER) project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)," framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Gomez-Soriano was partially supported through contract FPI-S2-2016-1353 of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-16)" of Universitat Politecnica de Valencia. The submitted manuscript was created partly by UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a US Department of Energy (DOE) Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. This research was partly funded by the US DOE Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Leo Breton, program managers at DOE, for their support.