Pasar al contenido principal

SINTESIS Y APLICACIONES SELECCIONADAS DE NUEVOS NANOMATERIALES Y NANOCOMPUESTOS POROSOS MULTIFUNCIONALES

PID2021-126304OB-C43

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flow and Batch Minute-Made Synthesis of Ce-UVM-7 Using Microwave-Assisted Reaction: Scaling-Up, Optical and Catalytic Applications, and Impact Assessment

  • Rodríguez-Carrillo, Cristina
  • Benítez, Miriam
  • De los Reyes, Ruth
  • El Haskouri, Jamal
  • Amorós, Pedro
  • Ros-Lis, José V.
[EN] This study introduces the first synthesis of a cerium-containing UVM-7 material, a bimodal mesoporous silica material. It was prepared swiftly using microwave-assisted synthesis powered by solid-state generators in combination with the atrane route. This synthesis process has been meticulously optimized and scaled-up in batch form. We also developed a flow synthesis procedure for Ce-UVM-7. These materials exhibit homogeneous Ce distribution within the UVM-7 silica structure with a Si/Ce ratio of up to 15. The scaled-up synthesis process allows the preparation of 35 g of Ce-UVM-7 in just 10 min of irradiation, with batch and flow synthesis methods achieving a yield of 11 g h(-1). We studied the optical properties, sun protection factor (SPF), and ROS scavenging properties of the resulting materials. The results show that the band gap decreases as the cerium concentration increases, reaching only 3.15 eV for the most concentrated sample and a high SPF. The peroxidase activity of materials prepared with a Si/Ce ratio of 25 is higher than that found for pure CeOx. Life cycle assessment confirms a significant reduction in the environmental impact during the scale-up process, with values of approximately 8 points in the single score for the preparation of 1 kg of Ce-UVM-7, further highlighting the efficiency and sustainability of this novel synthesis method., This research was funded by the Spanish Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126304OB-C43 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; the AGROALNEXT program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat grant number EUAGROALNEXT/2022/065; and by Generalitat Valenciana grant number CIAPOT/2022/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In-depth study of factors affecting the formation of MCM-41-type mesoporous silica nanoparticles

  • Candela-Noguera, Vicente
  • Alfonso-Navarro, María
  • Amorós, Pedro
  • Aznar, Elena|||0000-0003-0361-3876
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Mesoporous silica nanoparticles (MSN), especially MCM-41 type, have been broadly studied and used in different applications such as catalysis, nanomedicine and environmental science. One of the most advantageous properties of these materials is their easy and tunable synthesis. Nevertheless, in spite of the efforts made by researchers in the last decades, there is still no complete understanding of the mechanism and factors affecting the formation of MCM-41 type MSN, and some parameters are disregarded in the reported synthesis protocols. Considering that the fine-tuning of the parameters affecting nanoparticle synthesis is the basis for obtaining welldefined nanodevices with advanced complex functionalities, an in-depth study of the factors affecting the formation of MCM-41 type MSN is carried out in this work. We analyzed the first stages of MSN formation, namely the silica-surfactant templating and nanoparticle nucleation and growth, and found that hydrolysis and condensation rates play a central role in nanoparticle formation. Furthermore, we found that some disregarded parameters in the MCM-41 type synthesis, such as the stirring strength or the surfactant addition rate, modulate nucleation and growth, influencing the hydrolysis and condensation rates. Finally, we studied the aging and the evolution of the MSN by analyzing the consolidation of the silica framework over time. Therefore, we further elucidate some points about the mechanism and factors affecting the formation of mesoporous silica, which brings us closer to obtaining reproducible, homogeneous and tailored-made MCM-41 type MSN., Vicente Candela-Noguera thanks the Spanish Government for his fellowship (FPU15/02753) . This research was supported by projects PID2021-126304OB-C41, PID2021-126304OB-C43 and PID2021- 128141OB-C22 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund-A way of doing Europe. This study also forms part of the Advanced Materials programme (MFA/2022/049 and MFA/2022/053) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This study was also supported by Generalitat Valenciana (CIPROM/2021/007) . The authors also thank the Electron Microscopy Service at UPV for support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast Microwave-Assisted Synthesis, Calcination and Functionalization of a Silica Mesoporous Nanomaterial: UVM-7

  • Díaz de Greñu-Puertas, Borja
  • Muñoz-Pina, Sara
  • Benitez, Miriam
  • El Haskouri, Jamal
  • Amoros del Toro, Pedro
  • Ros-Lis, José Vicente
  • De los Reyes Cánovas, Ruth|||0000-0001-9838-0678
[EN] We report here, for the first time, the use of a solid state microwave source for the synthesis, calcination and functionalization of a UVM-7 based hybrid mesoporous silica material. The synthesis of the UVM-7 material is obtained in 2 min at low power (50 W) by the combination of a microwave irradiation and the atrane route. Moreover, it has been successfully calcined and functionalized in just 13 and 4 min respectively with microwave assisted procedures. A total synthesis comprising each individually optimized step, can be executed in only 4 h including work-up, by contrast to a typical synthesis that comprises several days. Savings higher than one order or magnitude are obtained in time and energy. Our example is a proof of concept of the potential use of solid state microwave generators for the ultrafast on-command preparation of hybrid nanomaterials due to their accurate control and accelerating properties., This research was carried out thanks to the grants RTI2018-100910-B-C44 and PID2021-126304OB-C43 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe .We also thank Generalitat Valenciana (CPTTGENT2018/004 and APOTIP/2019/A/023)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid-state microwave assisted batch and flow synthesis, and life cycle assessment, of titanium containing UVM-7 mesoporous silica

  • Rodríguez-Carrillo, Cristina
  • Benitez, Miriam
  • De los Reyes, Ruth
  • Murcia, Sonia
  • El Haskouri, J.
  • Amorós, Pedro
  • Ros-Lisa, J.
  • Marta
[EN] UVM-7 is a bimodal mesoporous silica material that can be prepared in a short time with microwave assisted synthesis (MAS). It is prepared following the atrane route, that allows the synthesis of mixed silicas including other elements with homogeneous distribution. We report herein the preparation of Ti-UVM-7 with using the atrane route in combination with MAS with solid-state generators. The synthesis has been optimized and scaled-up in batch. Also, the flow synthesis has been developed. These materials have not been prepared before using solid-state generators, nor microwave-assisted flow chemistry. The materials have been characterized by XRD, N-2 adsorption-desorption, TEM, EDX, Raman, and Z potential. The materials can be prepared in less than 10 min with a Si/Ti ratio of up to 3.8, and a homogeneous Ti distribution within the UVM-7 silica structure. Scaled-up synthesis produces 33 g of Ti-UVM-7 in 10 min and 12 g h(-1) in batch and flow synthesis respectively. The optical properties and sun protection factor of the resulting materials were studied. The band gap decreases as titanium concentration increases, reaching 4.1 eV for the highest concentration. Life Cycle Assessment confirms a strong reduction in the impact derived from the scale-up with similar values of approximately 10 points in the single score for the preparation of 1 kg of Ti-UVM-7., This research was funded by the Spanish Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126304OB-C43 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; the AGROALNEXT programme supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat grant number EUAGROALNEXT/2022/065; and by Generalitat Valenciana grant number CIAPOT/2022/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of electrolyzed water to control fungal trunk pathogens in grapevine nurseries

  • Berbegal Martinez, Monica|||0000-0002-5773-3104
  • Armengol Fortí, Josep|||0000-0003-3815-8578
  • Blasco, Adolfo
  • Gaume, Grégoire
  • Amorós, Pedro
  • Fernandes, Antonia
  • Ros-Lis, José Vicente
[EN] BACKGROUNDGrapevine producers demand solutions to control fungal trunk pathogens (FTPs) in nurseries. Adopting integrated strategies combining several control methods has been indicated as the best approach to prevent or reduce infections on grapevine propagation material. In recent years, electrolyzed water (EW) has emerged as a sustainable alternative for disinfection. Thus, the objectives of our study were: (i) to determine the effect of EW on the conidial germination and mycelial growth of a wider selection of FTPs associated with different grapevine trunk diseases; and (ii) to evaluate the efficacy of EW to reduce infections caused by FTPs on grapevine planting material during the propagation process in a commercial nursery.RESULTSIn vitro experiments demonstrated the capacity of different EW products to reduce conidial germination and mycelium survival of selected FTPs belonging to different genera and species, even given that the results were variable depending on the type of product, pathogen evaluated and time of treatment. In two different nursery experiments, conducted in 2021 and 2023, EW-treated plants showed lower incidence of Petri and black-foot associated pathogens when compared with the untreated ones, although these differences were statistically significant only in 2023. Moreover, there were no negative effects of the EW treatments regarding the viability of the grafted plants.CONCLUSIONSOur results about the effect of EW against conidia germination and mycelium survival of FTPs, and the results of the nursery trials, suggest that EW could have promising applications in the grapevine nursery process. This treatment could be integrated with other complementary management strategies and also be extended to nurseries of other fruit and nut crops, in which FTPs are currently becoming important emerging diseases. (c) 2024 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., This project has been funded by the FEADER funds 'Europe invests in rural areas', the Generalitat Valenciana and the Spanish Ministry of Agriculture PDR-C.V 2014-2020 (AGCOOP_A/2019/012 and AGCOOP_A/2022/018); grants RTI2018-100910-B-C44 and PID2021-126304OB-C43 funded by MCIN/AEI/10.13039/501100011033 and by 'ERDF A way of making Europe'; the AGROALNEXT programme supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana grant no. EUAGROALNEXT/2022/065. Antonia Frinkler enjoyed a mobility stay funded by the Erasmus + KA1 Erasmus Mundus Joint Master Degrees Programme of the European Commission under the Plant Health Project. We acknowledge funding for open access charge: CRUE-Universitat Politecnica de Valencia and Farah Ben Atia and Antonio Ramon for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Systematic study of the implications of calcination and solvent extraction of the surfactant in MCM-41-type mesoporous silica nanoparticles

  • Candela-Noguera, Vicente
  • Aznar, Elena|||0000-0003-0361-3876
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Amorós, Pedro
[EN] Mesoporous silica nanoparticles (MSN) have been growing in recent years in a broad range of applications, such as nanomedicine, catalysis, and gas storage. For the preparation of MSN, especially in nanomedicine applications, the extraction of the surfactant template, generally 1-hexadecyltrimethylammonium bromide (CTAB), is required. Several methods to remove the surfactant from MNS have been reported in the literature, such as calcination, solvent extraction, and dialysis. Depending on the method employed, the materials obtained have different properties; however, a systematic study that compares the use of different surfactant extraction methods and their implications in the final characteristics of the MSN has not been reported. Hence, the aim of this work is to study the effect of surfactant removal on MSN by calcination at different temperatures (400 degrees C, 450 degrees C, 500 degrees C and 550 degrees C) or by extraction with HCl/ethanol or NH 4 NO 3 /ethanol. The final materials are fully characterised by different techniques. The study performed shows the removal efficiency when the different methods are used, and their effect on silica condensation degree, mesoporosity, cytotoxicity, and degradation rate. The results allow for obtaining a deeper knowledge of the surfactant removal processes., V.C.-N. thanks the Spanish Government for his fellowship (FPU15/02753) . This research was supported by projects PID2021-126304OB-C41, PID2021-126304OB-C43 and PID2021-128141OB-C22 funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund-Away of doing Europe. This study also forms part of the Advanced Materials programme (MFA/2022/049 and MFA/2022/053) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This study was also supported by Generalitat Valenciana (CIPROM/2021/007) . This research was also supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red- (CB07/01/2012) , Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. The authors also thank the Electron Microscopy Service at UPV and SCSIE at UV for support. NMR was registered at the U26 facility of ICTS "NANBIOSIS" at the Universitat of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nitroreductase-responsive gated mesoporous silica nanocarriers for hypoxia-targeted drug delivery

  • Barros, Mariana
  • Sáez José A.
  • Arroyo, Pau
  • Ros-Lis, J. Vicente
  • Garrido, M. Dolores
  • Terencio, M. Carmen
  • Montesinos, M. Carmen
  • Gaviña, Pablo
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Hypoxia, i.e., low oxygen concentration at the tissue level, is a common feature of most solid tumors, and is responsible for their enhanced aggressiveness and resistance to chemotherapy, radiotherapy and photodynamic therapy. Hypoxic microenvironments are also characterized by the overexpression of various reductase enzymes such as nitroreductases. Herein, we report a hypoxia-responsive hybrid nanomaterial consisting of mesoporous silica nanoparticles, loaded with the chemotherapy drug doxorubicin, and functionalized on their surface with a self-immolative gatekeeper responsive to nitroreductases, for the controlled release of the cargo. Thus, under bioreductive conditions, elicited by the presence of nitroreductase and NADH, the reduction of the nitroaromatic containing molecular gate induces a self-immolative elimination leading to the disintegration of the gatekeeper and the delivery of the doxorubicin from inside the pores. The nitroreductase-responsive nanocarrier has been tested in vitro with A549 cells, that are known to express nitroreductase, to demonstrate its effectiveness as drug carrier for doxorubicin release, showing great potential for the treatment of hypoxic tumors., We thank the Spanish Government for grants PID2021-126304OB-C41, PID2021-126304OB-C42, and PID2021-126304OB-C43, funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund-A way of making Europe, EU. We also acknowledge the Generalitat Valenciana (Conselleria de Educacion, Universidades y Empleo) for grants CIAICO/2022/146 and CIPROM/2021/007. SCSIE (Universidad de Valencia) is gratefully acknowledged for all the equipment employed. NMR spectra were registered at the U26 facility of ICTS "NAMBIOSIS" at the Universitat de Valencia.r C41, PID2021-126304OB-C42, and PID2021-126304OB-C43, funded by MCIN/AEI/10.13039/501100011033/and by European Regional Development Fund-A way of making Europe, EU. We also acknowledge the Generalitat Valenciana (Conselleria de Educacio<acute accent>n, Universidades y Empleo) for grants CIAICO/2022/146 and CIPROM/2021/007. SCSIE (Universidad de Valencia) is gratefully acknowledged for all the equipment employed. NMR spectra were registered at the U26 facility of ICTS "NAMBIOSIS" at the Universitat de Vale`ncia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graphene oxide as inhibitor on the hydrolysis of fats under simulated in vitro duodenal conditions

  • Fernández-Núñez, Alberto
  • EL Haskouri, Jamal
  • Amorós, Pedro
  • Ros-Lis, José Vicente
[EN] Obesity is a global pandemic, thus novel developments that reduce the absorption of fats is of interest. We have evaluated the effect of graphene oxide (GO) on the lipase catalyzed hydrolysis of fats (tributyrin, sunflower and olive oil) under simulated duodenal conditions. Results indicate that the presence of GO in the digestion mixture can inhibit lipase activity up to a 90% of the initial reaction rate, and this inhibition lasts even during 2 h of digestion. The inhibition mechanism seems non competitive and could be opposite to the effect of bile salts, although the direct interaction between GO and the enzyme cannot be discarded. The inhibition is found also in alimentary fats suggesting that GO could be a strong inhibitor for fat hydrolysis., This research was funded by the Spanish Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126304OB- C43 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; the AGROALNEXT programme supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat grant number EUA- GROALNEXT/2022/065; and by Generalitat Valenciana and European Union, Next Generation EU grant number INVEST/2022/406.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The simultaneous total oxidation of toluene, propene, and CO environmental pollutants using bimetallic Au-Pt/ZrO2/UVM-7 catalysts

  • Aggett, Kieran J.
  • García Martínez, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín
  • Amorós, Pedro
  • Taylor, Stuart H.
11 figures, 4 tables., Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM-7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst., A.M., M.P.F., and R.A. acknowledge the Spanish MICIU for funding (CEX2023-001286-S MICIU/AEI/10.13039/501100011033) as well as the regional government of Aragon (DGA E13_23R). [...]. R.A. and A.M. also acknowledge the support of the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CNS2023-144346/AEI /10.13039/501100011033, respectively). M.P.F. acknowledges the support of the Spanish MICIU (Ayudas Margarita Salas). B.S. thanks the MCIN/AEI through the project TED2021-129555B-I00/AEI/10.13039/501100011033/ Unión Europea NextGeneration EU/PRTR. P.A. thanks PID2021-126304OB-C43 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe.” T.G. would like to acknowledge the Spanish Ministry of Science, Innovation and Universities through its Mobility program for stays of senior researchers and professors in foreign countries (PRX18/00474) and the regional government of Aragon (DGA T04_20R) for funding. XPS analysis work was performed through the support of the EPSRC National Facility for X-ray photoelectron spectroscopy (‘HarwellXPS’, Grant numbers EP/Y023587/1, EP/Y023609/1, EP/Y023536/1, EP/Y023552/1, and EP/Y023544/1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed