Pasar al contenido principal

DISPOSITIVO FOTOELECTROQUIMICO DE DOS ELECTRODOS PARA LA PRODUCCION DE HIDROGENO VERDE UTILIZANDO COMPONENTES NO CRITICOS Y DERIVADOS DE GRAFENO

PID2022-139671OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 41
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal-free dyes with deep HOMO level for TiO2 sensitization

  • Ansón-Casaos, Alejandro
  • Orduna, Jesús
  • Martínez-Barón, Carlos
  • Blanco Cambronero, Aitana
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at the XI Franco-Spanish Workshop IBERNAM-CMC2 – 9-10th November 2023, Zaragoza (Spain)., Photoelectrochemical (PEC) water splitting is being intensively studied as a method for green hydrogen production and artificial photosynthesis. Specifically, titanium dioxide (TiO2) nanoparticles show remarkable properties as a photocatalyst and for the preparation of nanostructured photoanodes. However, as a wide bandgap semiconductor, TiO2 is only active under UV irradiation, and sensitization with organic dyes would be a convenient strategy to improve its solar conversion efficiency. In our previous work, we studied the sensitization of the TiO2 electrode through the adsorption of a metal-free donor-π-acceptor (D-π-A) dye molecule (AT-Pyri) [1]. The AT-Pyri molecule consists of an aniline donor, thiophene π-spacer, and a pyrimidine unit as the acceptor part. We showed that the AT-Pyri/TiO2 electrode was in fact active for water splitting under a wide range of visible light wavelengths, up to 600 nm. However, the system visibly degraded during transient photocurrent measurements under potentiostatic conditions in the Na2SO4 aqueous electrolyte. As a possible source of instability, we considered the oxidation potential (Eox) of AT-Pyri, which was determined to be +0.88 V vs. SHE, thus above the O2/H2O reduction potential. In this work, we evaluate the energy levels of two alternative dye molecules by means of DFT theoretical calculations. In terms of the chemical structure, we follow a simplification strategy, resulting in π-A type molecules. We select the bithiophene ring as the π-spacer, and either cyanoacetic acid (-CNCOOH) or pyrimidine (Pyri) as the acceptor and anchoring group (Figure 1). Both dyes fulfil theoretical requirements to become TiO2 sensitizers in a water splitting process, with Eox > EO2/H2O (Table 1). Next, we perform the laboratory synthesis and characterization of both dyes, which show yellowish colors. Nanostructured TiO2 electrodes on FTO/glass substrates are prepared by screen printing, and dye adsorption is successfully accomplished by immersion of TiO2 electrodes in CH2Cl2 solutions. However, the TT-CNCOOH dye desorbs from the TiO2 support and is solubilized when the electrode is put in contact with electrolytic Na2SO4 and phosphate buffer solutions, so it is not used for PEC studies. The complete PEC characterization of the TT-Pyri/TiO2 electrode is performed in a 3-electrode cell with aqueous Na2SO4 electrolyte, and under simulated solar light irradiation. The electrode is stable under cyclic voltammetry conditions between -0.5 and 0.4 V vs. Ag/AgCl. Moreover, the electrode keeps its yellow color after a 5 min photocurrent measurement under light irradiation periods of 15 s and a constant potential of 0 V vs. Ag/AgCl. The photocurrent is multiplied by 1.6 and 12.5 In the presence of glycerol and triethanolamine as sacrificial agents, respectively. The dye sensitization effect was also proved by experiments using a monochromator. However, as it is observed after a continuous photocurrent measurement for 2 h, the long-time stability is still hindered by a slow unknown degradative mechanism, which requires further investigation, Financial support from Spanish MICINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2019-104272RB-C51, PID2022-139671OB-I00 and PID2019-104307GB-I00, and the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Hernández-Ferrer, Javier
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
8 figures, 2 tables.-- Supplementary information available., Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing., Sustainability spotlight : Photoelectrochemical processes are essential for many clean energy production methods. For such purpose, the involved electrodes are typically fabricated by means of polluting additives and toxic solvents. Designing efficient electrodes in a sustainable way is of fundamental interest. There is thus a need for non-toxic and green aqueous dispersants, for which nanocellulose shows promising prospects of sustainability and cost-effectiveness. Here we use cellulose nanocrystals in combination with TiO2 nanoparticles, not only to valorise renewable raw materials, but also to conform functional photoanodes in a ground-breaking way. These electrodes are able to undergo photoelectrochemical water splitting, performing more efficiently than a commercial TiO2 benchmark due to the role of nanocellulose, which goes beyond a mere dispersing agent. Our methodology addresses important aspects of responsible consumption and production (UN SDG 12), affordable and clean energy (UN SGD 7), and climate action (UN SDG 13)., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as by the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged. V. C. is thankful for his PhD contract funded by DGA (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant [Dataset]

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Hernández-Ferrer, Javier
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
20 figures, 2 tables.-- TEM, size distribution and elemental analysis of CNC: TEM images of the type II CNC are presented in Figure S1 and the distribution of diameters and heights of the CNC are in Figure S2. It can be observed the characteristic shape and size of this type of CNC, with a mean diameter 28 ± 13 nm and a length of 58 ± 15 nm. Type II CNCs were analyzed to determine their composition by elemental analysis and the results are presented in Table S1. The most characteristic result is the relative high mass percentage of sulfur of 3.45%, which is clearly higher than the value in type I CNCs prepared by the same approach. The elemental composition (C, H, N and S) of the CNCs was determined using a LECO 628 elemental analyzer (Velp Scientifica). The elemental analysis was performed in triplicate to ensure reproducibility, and the average values were reported. Commercial TiO2 paste (TiO2-P): Film fabrication: The commercial paste (TiO2-P) was dried in an oven at 120 ºC overnight to remove organic solvents and get a material ready for subsequent solid stated characterization such as XRD and TGA measurements. For the preparation of the photoelectrodes using the commercial paste, an optimized screen-printing procedure was employed following the instructions provided by the supplier. The paste was applied to cover a 1 cm2 surface area of the FTO substrates. Subsequently, the electrode was thermally sintered in an oven with the following temperature profile: 5 minutes at 325 ºC, 5 minutes at 375 ºC, 5 minutes at 450 ºC, and 15 minutes at 500 ºC, under an air atmosphere, according to the instructions from the provider. Prior to the photoelectrochemical (PEC) evaluation, the TiO2 film was activated by treating it at 500 ºC in air for 30 minutes. Preparation of TiO2(NH4OH) and solid material: TiO2(NH4OH) dispersions were prepared by mixing 50 mg of anatase powder, 300 µL of commercial aqueous ammonia (30%) and 19.7 mL of ultrapure water. Then, the resulting mixture was homogenized in an ultrasonic bath for 1 h. Dispersions were freeze-dried to obtain powder materials for further characterization. UV-Vis of the employed materials: Figure S5a shows the transmittance curves of various aqueous dispersions, including freshly prepared TiO2-NPs, TiO2(NH4OH), CNC materials, and the TiO2(NH4OH) material after 24 hours of dispersion preparation. At the selected wavelength of 360 nm, the TiO2- NPs dispersion exhibits the highest transmittance, indicating an unstable system with most of the material settling down. Conversely, the TiO2(NH4OH) material shows lower transmittance values, which moderately increases after 24 hours, evidencing successful dispersion of the TiO2-NPs when ammonia was used. Figure S5b shows the variation of the transmittance for the TiO2(NH4OH), TiO2-CNC and TiO2-CNC(NH4OH) materials with time. The results demonstrate the effective role of ammonia in facilitating the dispersion of TiO2-NPs, although CNC exhibited superior stabilization efficiency. Notably, the combination of ammonia and CNC yields the most stable aqueous dispersions, as evidenced by consistent transmittance values even after 24 hours. TEM of the TiO2(NH4OH) material: TEM images in Figure S6 reveal the presence of TiO2 aggregates, typically smaller than 100 nm. It seems that the addition of NH4OH during the preparation of the TiO2-NPs dispersion effectively disrupt the formation of large aggregates. Thermogravimetric analysis of CNC: All thermogravimetric analysis (TGA) of powder materials were carried out under air atmosphere in a Libra F1 (Netzsch) thermobalance using a ramp of 10 ºC/min. Figure S7 confirms that CNC have been completely eliminated, as there is no residual mass after the experiment. Thermogravimetric analysis of the TiO2-CNC material: As the CNC residue is 0% at 800 ºC and approximately of 5% at 450 ºC, it can be deduced that CNC have been completely removed from the TiO2 matrix during the sintering step (450 ºC, 2 hours). The TiO2-CNC material reveals a 50% of residual mass, which confirms that all CNC were removed at a 1:1 TiO2 : CNC ratio (Figure S8). Differences in surface morphology between films prepared from commercial TiO2- P and TiO2-CNC(NH4OH): Figure S9 shows the results from the profilometry measurements of TiO2-P and TiO2- CNC(NH4OH) films. Both films displayed remarkable differences in surface characteristics. While TiO2-P film shows a smooth surface, the film obtained from the TiO2-CNC(NH4OH) dispersion exhibits a significant higher roughness. This disparity is clearly a consequence of the respective fabrication methodologies. In the case of the TiO2-P, screen printing was employed, allowing the particles to accommodate under the gentle pressure of the printing blade, resulting in a roughness of 110 nm (Figure S9a). By contrast, the spray coating process immobilized the TiO2-NPs upon contact with the hot substrate, leading to rapid droplet evaporation and the formation of a film with a pronounced roughness of 1300 nm (Figure S9b). Effect of CNC in the surface morphology. Comparison between films prepared from commercial TiO2-P and TiO2(NH4OH): To gain more insight into the effect of film processing, namely screen printing and spray coating, a comparison between TiO2 photoanodes of the same thickness (~3.5 µm) prepared by both techniques is herein shown. The screen-printed TiO2 photoanode was prepared with the GreatCell® paste, whereas the spray-coated TiO2 photoanode was fabricated from the TiO2(NH4OH) dispersions in order to discard the CNC effect upon sintering, as described in the main article. In terms of surface morphology, it is of great interest the study of such property according to the followed fabrication procedure. As commented before, the screen-printed films display low Rq values (Figure S10a) whereas the TiO2(NH4OH) ones show a higher roughness (Figure S10b). These differences directly arise from the film fabrication method followed. Furthermore, the addition of CNC clearly influences the morphology of the film, with the bare TiO2(NH4OH) film showing lower roughness (900 nm, Figure S10b) compared to the TiO2-CNC(NH4OH) one (1300 nm, Figure S9b). Gas physisorption of the TiO2 materials (N2 isotherms): To further explore the effect of the CNC on the macroporous structure of the TiO2-CNC(NH4OH) material used as photoanode, physisorption measurements were conducted on both bare TiO2-NPs and TiO2-CNC(NH4OH) powder materials after sintering. N2 adsorption−desorption at -196 °C (Quantachrome Autosorb-6B Instrument) was measured after sample degassing (250 °C, 4 h) to characterize the porous texture and the equivalent Brunauer−Emmett−Teller (BET) specific surface area (SBET). Figure S11 shows the N2 isotherms of the employed materials. Both materials exhibit type II isotherms according to the IUPAC classification, typical of non-porous solids.The isotherms (Figure S11) reveal an initial increase at low relative pressure values. When it comes to the intermediate region of the isotherms, it is important to note that the TiO2 CNC hybrid has a slightly increased adsorption due to the removal of the biopolymer during the thermal treatment. This probably refers to an enlarged separation between the solid TiO2 particles. A narrow hysteresis loop appears at very high relative pressures, around p/p0 = 0.9, which is commonly ascribed to the capillary condensation taking place within the interstitial pores between TiO2 particles. The BET specific surface area of the TiO2-CNC(NH4OH) powder material is marginally higher (42 m2/g) to the observed for the bare TiO2 nanoparticles (35 m2 /g), evidencingnot too much influence of the CNC in the final internal porosity. Pore size distribution (DFT and BJH methods): Pore size distribution has been calculated for both samples from their N2 adsorption isotherms using the density functional theory (DFT) (Figure S12) and the Barrett-JoynerHalenda (BJH) method (Figure S13), which uses the Kelvin model of pore filling. X-Ray diffraction: X-ray diffraction results of the employed materials, namely CNC (type-II), TiO2-NPs (anatase), TiO2-CNC, and the commercial TiO2 paste (GreatCell®) are shown in Figure S14. The diffractogram of CNC (type-II) is in agreement with literature. The synthesized TiO2-NPs exhibits the characteristic profile of anatase NPs, evidencing a comparable crystal phase composition and crystallite size to the commercial TiO2 paste. The average crystallite size of the employed TiO2-NPs is 25 nm,3 whereas the commercial TiO2 paste is composed of particles distributed in two sizes: 20 and 300 nm. Notably, the XRD analysis of the prepared TiO2-CNC(NH4OH) hybrid shows a combined pattern from TiO2 and CNC, not showing any additional peaks. Thermogravimetric analysis of the commercial TiO2 paste: The concentration of TiO2 in the commercial paste is somewhat higher (62%, Figure S15) to that of the TiO2-CNC. This mass loss is ascribed to the removal of alkylated celluloses from the paste. Scanning electron microscopy of photoanodes from commercial TiO2-P based: Figure S16 shows SEM images of the film obtained from TiO2 commercial paste. The TiO2-P based photoelectrode film displays a smooth surface, both before and after air sintering, despite having a similar content of cellulose derivatives (62 wt.% of TiO2) to our TiO2-CNC(NH4OH) hybrid (50 wt.%) (Figure S8). Photoelectrochemical characterization of the films prepared from TiO2(NH4OH) and commercial TiO2-P: Figure S17 displays the CV profiles of the TiO2(NH4OH) and TiO2-P films, both under dark and illumination. In the absence of light, the photoelectrodes exhibit the characteristic reversible redox behavior of TiO2 electrodes. A cathodic current is observed at more negative potentials, and a nearly symmetric positive current during the backward scan. The voltammograms exhibited an accumulation region at approximately -0.8 V, and a depletion region at higher potentials, -0.4 V. Under illumination conditions, both materials show similar photocurrent values (~ 46 µA·cm2). This observation is further supported by transient photocurrent measurements (Figure S18), which reveal slight differences between the two electrodes (from 32 µA·cm-2 to 43 µA·cm-2), highlighting the significant improvement of the TiO2 electrodes when using CNC and ammonia for their fabrication. 5-hour photocurrent measurements: Aiming to study the stability of the TiO2-CNC(NH4OH) and TiO2-P photoanodes, 5-hour experiments at a constant potential (0 V vs. Ag/AgCl) were performed (Figure S19). A photocurrent decay is observed in both cases, mainly caused by the blocking of the TiO2 active sites due to parasitic redox processes (see references 33, 34 and 35). Nevertheless, the TiO2-CNC(NH4OH) retained a higher PEC performance, even after 5 hours under operation conditions due to its specific morphology that arises from the CNC processing. Electrochemical impedance spectroscopy (EIS): Equivalent circuit: EIS spectra were analyzed according to the model circuit shown in Figure S20. Resistances (RS, Rct and Rsc) and constant phase elements, i.e. non-ideal capacitors with phase angle <90, (CPEdl and CPEsc) are calculated as model fitting parameters to the experimental data.-- Under a Creative Commons license BY-NC 3.0., TEM, size distribution and elemental analysis of CNC. Commercial TiO2 paste (TiO2-P): Film fabrication. Preparation of TiO2(NH4OH) and solid material. DLS and ζ-potential measurements. UV-Vis of the employed materials. TEM of the TiO2(NH4OH) material. Thermogravimetric analysis of CNC. Thermogravimetric analysis of the TiO2-CNC material. Differences in surface morphology between films prepared from commercial TiO2-P and TiO2-CNC(NH4OH). Effect of CNC in the surface morphology. Comparison between films prepared from commercial TiO2-P and TiO2(NH4OH). Physisorption of the TiO2 materials (N2 isotherms). Pore size distribution (DFT and BJH methods). X-Ray diffraction. Thermogravimetric analysis of the commercial TiO2 paste. SEM of photoanodes from commercial TiO2-P. Photoelectrochemical characterization of films prepared from TiO2(NH4OH) and commercial TiO2-P. 5-hour photocurrent measurements. Electrochemical impedance spectroscopy (EIS). Equivalent circuit. References., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as by the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged. V. C. is thankful for his PhD contract funded by DGA (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocellulose: The ultimate green aqueous dispersant for nanomaterials

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Fuentes Varela, Laura
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 1 table., Nanocellulose, a nanoscale derivative from renewable biomass sources, possesses remarkable colloidal properties in water, mechanical strength, and biocompatibility. It emerges as a promising bio-based dispersing agent for various nanomaterials in water. This mini-review explores the interaction between cellulose nanomaterials (nanocrystals or nanofibers) and water, elucidating how this may enable their potential as an eco-friendly dispersing agent. We explore the potential of nanocellulose derived from top-down processes, nanocrystals, and nanofibers for dispersing carbon nanomaterials, semiconducting oxide nanoparticles, and other nanomaterials in water. We also highlight its advantages over traditional methods by not only effectively dispersing those nanomaterials but also potentially eliminating the need for further chemical treatments or supporting stabilizers. This not only preserves the exceptional properties of nanomaterials in aqueous dispersion, but may even lead to the emergence of novel hybrid functionalities. Overall, this mini-review underscores the remarkable versatility of nanocellulose as a green dispersing agent for a variety of nanomaterials, inspiring further research to expand its potential to other nanomaterials and applications., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as from Gobierno de Aragón (DGA) under project T03_23R (Grupos de Investigación Reconocidos). V.C. and C.M.-B. thank the DGA for funding their PhD contracts (Ref. CUS/581/2020 and CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanomaterials-based inks and electrodes using chitin nanocrystals

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 2 tables., Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications., Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring ultrafast carrier dynamics in photoelectrochemical water splitting using transient absorption spectroscopy

  • Sivan, Aswathi K.
  • Galán, Alejandro
20 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Hydrogen fuel produced from water splitting using sunlight remains one of the cleanest and most sustainable energy sources. However, photoelectrochemical hydrogen production faces several challenges, including poor sunlight absorption, deficient charge carrier lifetime and transfer rates, and very sluggish kinetics of the water oxidation half-reaction. To address these challenges, researchers have concentrated on enhancing the efficiency of photoelectrochemical water splitting. A critical factor in this enhancement is a deeper understanding of the fundamental processes involved in photoabsorption and the subsequent oxidation evolution reaction. The advent of ultrafast lasers has enabled the detailed tracking of charge carriers within materials after sunlight absorption, including their separation and migration to the surface for water oxidation. Ultrafast transient absorption spectroscopy is a powerful technique that allows real-time observation of the behavior of excited states and charge carriers on femtosecond to nanosecond timescales. Recent studies utilizing ultrafast transient absorption spectroscopy are explored to investigate the dynamics of charge carriers in photoelectrochemical water splitting, providing insights into the mechanisms that lead to the design of enhanced photoanodes with improved efficiency., A.K.S. and A.G.-G. contributed equally to this work. A.K.S. acknowledges financial support from the Georg H. Endress Foundation. A.G.-G. acknowledges funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well from the Diputación General de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
4 figures, 1 tables.-- This research made use of Marvin, a core Python package and web framework for MaNGA data, developed by Brian Cherinka, José Sánchez-Gallego, Brett Andrews, and Joel Brownstein. (MaNGA Collaboration, 2018)., Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome., Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary materials for Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes [Dataset]

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
Under a Creative Commons license BY 4.0., S1. Experimental methods of molecular characterization S2. Synthesis of compound ALD Scheme S1. Synthesis of aldehyde ALD S3. Structural characterization Figure S1. 1H‐NMR spectrum of compound ALD (400 MHz, CDCl3). Figure S2. 13C‐NMR (APT) spectrum of compound ALD (100 MHz, CDCl3). Figure S3. FTIR spectrum of compound ALD. Figure S4. HRMS (ESI+) of compound ALD. Figure S5. 1H‐NMR spectrum of compound ASIL-CNCOOH (400 MHz, CDCl3). Figure S6. 13C‐NMR spectrum of compound ASIL-CNCOOH (100 MHz, CDCl3). Figure S7. FTIR spectrum of compound ASIL-CNCOOH. S3. Optical characterization Figure S8. UV-vis absorption spectra of ASIL-CNCOOH and TT-CNCOOH in DCM Figure S9. Concentration dependence of ASIL-CNCOOH dye. UV-vis Absorption spectra in DCM. Figure S10. Concentration dependence of TTCNCOOH dye. UV-vis Absorption spectra in DCM. S4. Electrochemical characterization Figure S11. Differential pulse Voltamogramms: (a) TT-CNCOOH; (b) ASIL-CNCOOH., 1. Experimental methods of molecular characterization Melting points were obtained on a Gallenkamp apparatus in open capillaries and are uncorrected. 1H and 13C-NMR spectra were recorded on a Bruker AV400 at 400 MHz and 100 MHz respectively; δ values are given in ppm (relative to TMS) and J values in Hz. The apparent resonance multiplicity is described as s (singlet), br s (broad singlet), d (doublet), t (triplet), q (quartet) and m (multiplet). 1H-1H COSY and 1H-13C-HSQC experiments were recorded in order to establish peaks assignment. Electrospray mass spectra were recorded on a Bruker MicroToF-Q spectrometer and on a Bruker TIMS-TOF; accurate mass measurements were achieved using sodium formate as external reference. UV-Visible spectroscopy of dye molecules in dichloromethane (DCM) was performed with an UVvis Cary 6000. Differential Pulse Voltammetry (DPV) measurements were performed with a μ-Autolab ECOChemie potenciostat, using a glassy carbon working electrode, Pt counter electrode, and Ag/AgCl reference electrode. The experiments were carried out under argon, in DCM with Bu4NPF6 as the supporting electrolyte (0.1mol L-1). Scan rate was 100 mV s-1., Scheme S1. Synthesis of aldehyde ALD 4-({2-[(tert-butyldimethylsilyl)oxy]ethyl}(methyl)amino)benzaldehyde, ALD At 0°C, 0.25 g (3.75 mmol) of imidazole and 0.56 g (3.75 mmol) of tert-butyldimethylsilyl chloride was dissolved in 5 ml of dry N,N-dimethylformamide (DMF) under argon atmosphere. Next, 0.44 g (2.50 mmol) of 4-((2-hydroxyethyl)(methyl)amino)benzaldehyde was dissolved in DMF and introduced into the former solution. The reaction was maintained for 24 h at room temperature. The DMF was evaporated under reduced pressure, an oil being obtained. It was rinsed with ethyl acetate (3x60 mL). The organic phase was washed with NaCl (3x60mL) and a saturated NH4Cl solution (3x60mL). Finally, the crude was dried with MgSO4, filtered and the solvent was removed. It was purified using column chromatography with hexane/AcOEt (80/20) eluent. Finally, 0.62 g of an orange oil (ALD) was obtained (Yield: 85%). Molecular weight: 293.05 g/mol. FTIR (KBr) cm-1: 1683 (C=O), 1114 (Si-H). 1H-RMN (400 MHz, CDCl3) δ (ppm): 9.73 (s, 1H), 7.72 (d, J= 8.8 Hz, 2H), 6.72 (d, J= 8.8 Hz, 2H), 3.80 (t, J= 5.8 Hz, 2H), 3.60 (t, J= 5.8 Hz, 2H), 3.10 (s, 3H), 0.86 (s, 9H), 0.00 (s, 6H). 13C-RMN (100 MHz, CDCl3) δ (ppm): 190.2, 153.6, 132, 125.1, 111, 60.4, 54.5, 39.5, 25.8, 18.2, -5.5. HRMS (ESI+) m/z: calculated [C16H28NO2Si]+: 294.1889 found 294.1883[M+H]+, Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifaceted role of H2O2 in the solvothermal synthesis of green-emitting nitrogen-doped graphene quantum dots

  • Carrera Jiménez, Clara
  • Galán, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures.-- Under a Creative Commons BY 3.0 license.-- Open peer-review content at https://www.webofscience.com/api/gateway/wos/peer-review/10.1039/D4SC07896A., Fluorescent nitrogen-doped carbon dots (N-GQDs) with long-wavelength emission properties are of increased interest for technological applications. They are widely synthesized through the solvothermal treatment of graphene oxide (GO) using N,N-dimethylformamide (DMF) as a cleaving and doping agent. However, this process simultaneously generates undesired interfering blue-emissive by-products. In this study, we present a straightforward method for synthesizing N-GQDs exclusively exhibiting green fluorescence. The key innovation lies in the addition of hydrogen peroxide (H2O2) to the DMF-driven one-pot solvothermal cleavage process. Systematically controlling the reaction conditions, we elucidate the threefold beneficial role of H2O2: first, it acts as a radical source facilitating the degradation of DMF and the generation of nitrogen-containing radicals, essential for N-GQD formation; second, it prevents the thermal reduction of GO, thus ensuring persistent reaction pathways with DMF-derived radicals; and third, it suppresses the self-reaction of DMF-derived radicals, thereby avoiding the formation of undesired blue-fluorescent by-products. Our findings on the reaction mechanism and the advantageous role of H2O2 open new possibilities for the rational design of N-GQDs genuinely emitting at long wavelengths., Financial support from Spanish MCIN/AEI/10.13039/ 501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from Gobierno de Aragón (DGA), under Grupo de Investigación Reconocido DGA-T03_23R is acknowledged. Clara Carrera thanks DGA for funding her PhD contract (IIU/796/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Multifaceted role of H2O2 in the solvothermal synthesis of green-emitting nitrogen-doped graphene quantum dots [Dataset]

  • Carrera Jiménez, Clara
  • Galán, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
5 figures, 3 tables.-- Under a Creative Commons BY 3.0 license., S1. Synthesis of graphene oxide (GO) S2. Transmission electron microscopy (TEM) of GO S3. Transmission electron microscopy (TEM) of N-GQDs S4. Thermogravimetric analysis (TGA), Raman and FT-IR spectra of GO and N-GQDs S5. X-ray photoemission spectroscopy (XPS) of GO and N-GQDs S6. Powder X-ray diffraction (XRD) of GO and filtered reaction products S7. Emission spectra from products of GO reacted in DMF in different amounts S8. Characterization of DMF by-products: UV-vis spectra, XPS, photos of solutions, emission spectra as a function of reaction time.-- Graphite oxide was prepared according to a modified Hummers method.1,2 Specifically, graphite flakes (5 g) were dispersed into a mixture of H2SO4 (170 mL) and NaNO3 (3.75 g) by stirring for 30 min on an ice bath. Afterwards, KMnO4 (25 g) was slowly added and the reaction was cooled at 0 °C during 30 min. Thereafter, the mixture was warmed up to 35–40 °C and kept stirring overnight. The slowly addition of deionized water (250 mL) and H2O2 (20 mL, 30%) solution concluded the reaction. Subsequently, the dispersion was filtered and the solid is repeatedly washed firstly with HCl: H2O (400 mL, 1:10 v/v) and secondly with deionized water up to neutral pH. The product was dried at room temperature to obtain graphite oxide powder. Subsequent ultrasonication in the employed reaction solvent (DMF, H2O, H2O2) leads to well exfoliated graphene oxide sheets., Financial support from Spanish MCIN/AEI/10.13039/ 501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from Gobierno de Aragón (DGA), under Grupo de Investigación Reconocido DGA-T03_23R is acknowledged. Clara Carrera thanks DGA for funding her PhD contract (IIU/796/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control strategies for solution-processed ZTO-based thin-film transistors tailored toward volatile organic compound detection

  • Miller, Lauren R.
  • Galán, Alejandro
  • NIcholson, Ben
  • Bowen, Leon
  • Monier, Guillaume
  • Borthwick, Robert J.
  • White, Freddie
  • Saeed, Mana
  • Thompson, Richard L.
  • Robert-Goumet, Christine
  • Atkinson, Del
  • Zeze, Dagou A.
  • Chaudhry, Mujeeb Ullah
5 figures, 2 tables., A breakthrough in the fabrication of amorphous Zn-Sn-O (ZTO)-based thin-film transistors (TFTs) is presented for volatile organic compound (VOC) detection. The incorporation of highly abundant materials offers substantial economic and environmental benefits. However, analyses for the design of a multilayer channel are still limited. This work demonstrates that the chemical environment influences ZTO-based TFTs' carrier transport properties and can be tailored for detecting specific VOCs, ensuring high specificity in diagnosing life-threatening conditions through simple breath analysis. A low-cost, high-throughput, fully solution-processed ZTO and ZnO multilayering strategy is adopted. The in-depth compositional and morphological analyses reveal that low surface roughness, excellent Zn and Sn intermixing, high oxygen vacancy (31.2%), and M-OH bonding (11.4%) contents may account for the outstanding electrical and sensing performance of ZTO-ZTO TFTs. Notably, these TFTs achieve near-zero threshold voltage (2.20 V), excellent switching properties (107), and high mobility (10 cm2V−1s−1). This results in high responsivity to alcohol vapors at low-voltage operation with peak responsivity for methanol (R = 1.08 × 106) over two orders of magnitude greater than acetone. When miniaturized, these devices serve as easy-to-operate sensors, capable of detecting VOCs with high specificity in ambient conditions., M.U.C. thanks the Engineering and Physical Sciences Research Council (EPSRC) (New Investigator Award # EP/V037862/1 and Capital Equipment Grant EC/RF080422) for financial support. A.G.G. acknowledges funding from Spanish MCIN (MCIN/AEI/10.13039/501100011033) and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos). G.M. gratefully acknowledges financial support from the project SASS AV0027152 from FEDER-FSE-2014-2020 and the project 16-IDEX-0001 CAP 20–25., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Control strategies for solution-processed ZTO-based thin-film transistors tailored toward volatile organic compound detection [Dataset]

  • Miller, Lauren R.
  • Galán, Alejandro
  • NIcholson, Ben
  • Bowen, Leon
  • Monier, Guillaume
  • Borthwick, Robert J.
  • White, Freddie
  • Saeed, Mana
  • Thompson, Richard L.
  • Robert-Goumet, Christine
  • Atkinson, Del
  • Zeze, Dagou A.
  • Chaudhry, Mujeeb Ullah
Under a Creative Commons license BY.4.0, Table S1. Electrical properties obtained from ZTO-based TFTs treated at 500 °C and prepared from 0.3 M and 0.15 M precursor solutions. Table S2. Electrical properties obtained from ZTO-ZTO TFTs treated at temperatures from 300 °C to 500 °C. Table S3. Summary of the fitting parameters namely, layer thickness, SLD and interface width used to fit the experimental XRR spectra for each system studied. The metal oxide systems were simulated assuming a smooth and continuous surface. Table S4. Percentage contents and position of O 1s components for bilayer and trilayer films. Table S5. Atomic concentration (%) and calculated composition ratios at etch cycle five following XPS depth profiling of bilayer and trilayer films. Table S6. Electrical properties for L = 80 µm, 100 µm & 120 µm obtained before and after the ZTO-ZTO TFTs treated at 500 °C were exposed to IPA in the air. Table S7. Electrical properties for L = 80 μm, 100 μm & 120 μm obtained before and after the ZTO-ZTO TFTs treated at 500 °C were exposed to acetone in the air. Table S8. Electrical properties for L = 80 μm, 100 μm & 120 μm obtained before and after the ZTO-ZTO TFTs treated at 500 °C were exposed to toluene in the air. Table S9. Comparison of the TFT-based gas sensors’ performance. Figure S1. (a) Output characteristics at Vds = 0 to 40 V and Vgs = 0 to 40 V for ZTO-ZTO TFTs treated at 500 °C and (b) 450 °C. Transfer characteristics in the saturation regime at Vds = 40 V and Vgs = −20 to 40 V for the ZTO-ZTO TFTs treated at temperatures from 300 °C to 500 °C. Figure S2. Individual elemental mapping of the (a)-(e) ZTO-ZTO-ZnO and (f)-(j) ZTO-ZnO-ZTO films. Figure S3. AFM image (1 µm2 scan area) of (a) ZTO (b) ZTO-ZTO and (c) ZTO-ZnO films with calculated rms surface roughness. Figure S4. SEM images of the (a) ZTO-ZnO-ZTO and (b) ZTO-ZTO-ZnO thin films. (c) High magnification images of the ZTO-ZTO thin film and (d) calculated thickness from a cross-section. Figure S5. XPS wide scan of (a)-(b) ZTO-ZTO and (c)-(d) ZTO-ZnO films at etch cycles zero and twenty. Figure S6. XPS wide scan of (a)-(b) ZTO-ZTO-ZnO and (c)-(d) ZTO-ZnO-ZTO films at etch cycles zero and twenty. Figure S7. XPS depth profile of (a) ZTO-ZTO (b) ZTO-ZnO (c) ZTO-ZTO-ZnO and ZTO-ZnO-ZTO films. Figure S8. Transfer characteristics in the saturation regime at Vds = 40 V, Vgs = −40 to 40 V and L = 80 μm, 100 μm & 120 μm, obtained before and after the ZTO-ZTO TFTs treated at 500 °C were exposed separately to (a) acetone, (b) IPA and (c) toluene in the air. Figure S9. Transfer characteristics for the ZTO-ZTO TFTs treated at 500 °C in the saturation regime at Vds = 40 V, Vgs = −40 to 40 V and L = 80 μm following overnight exposure to (a) IPA, (b) acetone and (c) toluene vapors. Recovery with heat treatment is shown by the solid cyan lines. Figure S10. Transfer characteristics in the saturation regime at Vds = 40 V, Vgs = −40 to 40 V and L = 80 μm for the ZTO-ZnO TFTs treated at 500 °C following overnight exposure to (a) IPA and (b) acetone vapors. (c) Calculated responsivity. (d) Transient sensor response at fixed Vgs = 15 V, 25 V and 35 V in the linear and (e) saturation regimes. Figure S11. Bespoke testing chamber with device stage illustrations corresponding to source-drain electrode shadow mask., M.U.C. thanks the Engineering and Physical Sciences Research Council (EPSRC) (New Investigator Award # EP/V037862/1 and Capital Equipment Grant EC/RF080422) for financial support. A.G.G. acknowledges funding from Spanish MCIN (MCIN/AEI/10.13039/501100011033) and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos). G.M. gratefully acknowledges financial support from the project SASS AV0027152 from FEDER-FSE-2014-2020 and the project 16-IDEX-0001 CAP 20–25., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal-free dyes on TiO2 for PEC water splitting

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at III Workshop on Materials far Photocatalysis, Energy and Clean Environment (IIIWMPECE), ICMS -Sevilla, (Spain), February 20-21, 2025., Dye sensitization has been widely studied in electrochemical photovoltaic cells. More recently, a similar concept has been explored within the context of photoelectrochemical (PEC) water splitting, with a particular facus on TiO2 photoelectrodes. Despite the prevalence of organometallic complexes featuring expensive metals (Ru, Ir) in current dye and molecular catalyst research, efforts should be directed towards more abundant metals and purely organic photoactive compounds. One of the most efficient molecular structures in rr-conjugated building blocks organic to boost metal-free intramolecular dyes combines charge donar transfer (D), and acceptor electron (A), transport and to TiO2. In this communication, the water-splitting performance of TiO2 electrodes TiO2. sensitized with a series of such dye molecules (Table 1 ), including their possible combination with carbon nanomaterials, is summarized and analyzed. Electronic HOMO and HUMO levels, as well as reduction potentials of the dye molecules, reveal favorable thermodynamicreveal conditions, whereas their limited stability under water oxidation conditions seems to be related to purely kinetic effects. Tackling this challenge effects. remains crucial yetfar achieving future advances toward an artificial photosynthesis., Financial support from MCIN/AEl/10.13039/501100011033, MICIU/AEI/10.13039/501100011033 and "ERDF A Way of making Europe" under project grant PID2022-139671O8-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sacrificial role of carbon nanostructures in hybrid titanium dioxide photoelectrodes

  • Ansón-Casaos, Alejandro
  • Pérez-Hernández, Marta
  • Lemos-Chapela, J.
  • Martínez-Barón, Carlos
  • Ciria, José Carlos
  • González Domínguez, José Miguel
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of the oral communication presented at HeteroNanoCarb 2025, January 13-17, 2025, Benasque (Aragon), Spain., Many researchers have found positive effects upon inserting carbon nanostructures (CNTs, GO, CDs) in TiO2 for environmental photocatalysis, dye-sensitized photovoltaics, and photoelectrochemical (PEC) applications. Benefits of carbon nanostructures are generally linked to their outstanding properties of charge mobility and transfer. In our group, detailed electrochemical and PEC characterizations have been performed in the past on SWCNT/TiO2, GO/TiO2 and CD/TiO2 electrodes. However, the physicochemical mechanisms in C/TiO2 hybrids are complex and elusive to a generalized discussion. In this communication, the focus is set on electrode sintering, which is typically performed between 350-550 °C. When electrodes are treated under air atmosphere, carbon nanostructures can be logically altered. Still, certain improvements are found in the photocurrent density of water splitting (Figure 1). Therefore, the role of carbon nanostructures must be understood as a templating or surface conditioner, rather than a direct way for charge mobility., Financial support from Spanish MICIN/AE/10.13039/501100011033 and "ERDF a way of making Europe" under project grant PID2022-139671OB-I00, as well as by the Gobierno de Aragón (DGA) under project T03_23R (Grupo de Investigación Reconocido) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Carbon nanostructures: Heading toward water-based functional materials and sustainable device components: Part II

  • Benito, Ana M.
  • Maser, Wolfgang K.
Abstract of the work presented at NATO Advanced Study Institute, Nanotechnological Advances in Environmental, Cyber and CBRN Security, 14th-22nd september 2024, Sozopol (Bulgaria)., Carbon nanostructures encompass a diverse family of two-, one- and zero dimensional objects, covering graphene, carbon nanotubes, fullerenes and graphene dots as important representatives. There unique structures, translates into unparalleled world-record functional characteristics. This in turn offers unique possibilities for the design of novel, high-performing device components, very much sought for solving challenges mankind actually is facing. The first lecture offers a fundamental introduction into carbon nanostructures underlining the unique structure-property relationship and the value of these materials for a broad range of applications. The second lecture concentrates on pathways toward sustainable device fabrication. The key of developing water-based processing possibilities of carbon nanostructures will be highlighted. At hand of examples from own research findings [1-8], processing, macroscopic assembly, device component fabrication and performance will be discussed. This specifically will outline the contribution of carbon nanostructures to the field of energy applications as cornerstone for tackling the challenge of clean and sustainable energy production, an issue of concern to global security., Research project PID2022-139671OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”; Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity [Dataset]

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Under a Creative Commons BY 4.0 license., Detailed structural information obtained from XRD and Rietveld refinement of the hybrids, UV−vis spectra of all the as-prepared photocatalysts, FESEM images of the control and hybrid photocatalysts, schematic of the g-C3N4 cleavage and impregnation, additional XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid, additional degradation experiments, and table comparing the photocatalytic activity of different material systems., S1. X-ray diffraction Figure S1. XRD pattern of the (1 0 0) peak of g-C3N4 and hybrid materials. Table S1. Crystallographic parameters of hematite NPs and hybrid materials. S2. UV-vis absorption spectroscopy Figure S2. UV-vis spectra of the reference and hybrid materials. S3. XPS of Fe 2p core spectra Figure S3. Fe 2p XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid. S4. Cleavage and impregnation of g-C3N4 Figure S4. Schematic of the cleavage and impregnation process of the g-C3N4 sheets. S5. High resolution FESEM Figure S5. High-resolution FESEM micrographs of α-Fe2O3 NPs, g-C3N4 and hybrids. S6. Additional photocatalytic MB degradation results Figure S6. Effect of H2O2 and UV light on MB degradation. Figure S7. Comparison between UV and white ligh on MB degradation. Figure S8. MB degradation using different concentrations of photocatalyst. Figure S9. Comparative degradation of MB, RhB and MR. Figure S10. XRD analysis of the photocatalyst after recycling experiment. Figure S11. UV-vis spectra of time-dependent MB degradation. S7. Comparative table Table S2. Comparison of the photocatalytic activity and degradation time employing different material systems and experimental conditions. S8. References., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Álvarez Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
7 figures, 2 tables.-- Under a CC BY-NC 3.0 license., Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ω □−1. Furthermore, we demonstrate that post-deposition thermal treatment at 450 °C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and electrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes., Financial support from the Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2022-139671OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA), in the R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24), and through the grants to research groups (Grupo Reconocido DGA-T03_23R) is acknowledged. C. M.-B., V. C. and M. Á. Á.-S. thank the DGA for funding their PhD contracts (refs. CUS/621/2023, CUS/581/2020 and IIU/796/2019, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information for Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing [Dataset]

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Álvarez Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
Under a Creative Commons Attribution-NonCommercial 3.0 Unported deed license., The optimization of the dispersions of P2-SWCNTs with CNCs (Figure S1) provides key insights into the influence of the CNC concentration and allomorph type on the SWCNTs’ stabilization in water. The concentration of P2-SWCNTs after centrifugation is the most immediate parameter of interest, while ζ-potential and hydrodynamic size are crucial indicators of dispersion quality and stability over time. For type I CNCs, a significant increase in the stabilized P2-SWCNT concentration occurs between 2 and 2.5 g/L (Figure S1A), after which a plateau suggests a dispersion limit for this type of nanocrystals. Regarding the hydrodynamic size (Figure S1B), there is a clear decrease from 2 to 3.5 g/L CNCs, where the size reaches a steady value. The ζ-potential (Figure S1B) remains close to -30 mV across all dispersions, sufficient for stable dispersions, with a maximum around -34 mV, observed at 4 g/L CNCs. In contrast, type II CNCs demonstrate a more efficient stabilization of P2-SWCNTs, with a sharp increase in SWCNT concentration from 1.5 to 2 g/L of nanocrystals, achieving 0.83 g/L of P2-SWCNTs (Figure S1C). However, a decline is observed at concentrations beyond 3.5 g/L, particularly at 5 g/L, suggesting that an excess of CNCs may lead to aggregation. The ζ-potential values across all dispersions remained between -30 mV and -40 mV (Figure S1D), indicating strong electrostatic stabilization, and the smaller hydrodynamic sizes reflect better dispersion homogeneity compared to type I CNCs. Overall, these findings emphasize the need for a precise tuning of the CNC concentration and allomorph selection to achieve optimal dispersion efficiency of SWCNTs in water.-- 1. Optimization of the P2-SWCNT/CNC dispersions.............................................S3 2. Optimization of the p-MWCNT/CNC dispersions..............................................S4 3. Colloidal stability of CNT/NB dispersions after long-term storage....................S6 4. Raman spectroscopy of the CNT/NB dispersions ...............................................S6 5. UV-vis-NIR spectroscopy of the SWCNT/NB dispersions ................................S9 6. Characterization of CNTs and NBs materials ...................................................S10 7. TGA results of the lyophilized CNT/NB dispersions after thermal treatment..S10 8. Photographs of the CNT/NB films before and after thermal treatment ............S11 9. Contact angle of the CNT/NB films before and after thermal treatment ..........S12 10. Mechanical characterization of the CNT/NB films……………………………S13 11. Calculation of the CNT/NB films electrical conductivity.................................S14 12. Cyclic voltammetry measurements ...................................................................S14 13. Electrochemically active surface area estimation .............................................S16 14. Electrochemical impedance spectroscopy measurements……………..……...S18 15. References .........................................................................................................S19, Financial support from the Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2022-139671OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA), in the R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24), and through the grants to research groups (Grupo Reconocido DGA-T03_23R) is acknowledged. C. M.-B., V. C. and M. Á. Á.-S. thank the DGA for funding their PhD contracts (refs. CUS/621/2023, CUS/581/2020 and IIU/796/2019, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Green emissive CDs from m-phenylenediamine. Evaluation of structure, fluorescence and response in TiO2 photoanodes for photoelectrochemical water splitting

  • Álvarez Sánchez, Miguel Ángel
  • Martínez-Barón, Carlos
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
1 figure.-- Abstract of the poster presented at the HeteroNanoCarb 2025 Conference, January 13-17, 2025, in Benasque (Aragon), Spain., Within the carbon nanostructures family, Carbon Dots (CDs) stand-out due to their excellent properties, such as water solubility, high photoluminescence (PL) with tunable emission and photochemical stability, among others. Additionally, they are considered as a potential alternative to conventional quantum dots, thus overcoming issues of toxicity [1]. From polymeric to carbonized CDs species, critical factors such as doping heteroatoms, synthesis conditions and starting precursors are determinant in terms of their final size, structure and PL mechanism and source [2]. The wide variety of CDs species with different structure and PL emissions versatility for application in many research fields, such as photocatalysis, photoelectrochemistry, photovoltaics [3] and biomedicine [4]. In this work, we evaluate the properties of green emissive bottom-up synthesized CDs at different temperatures by hydrothermal process [5]. We present results on the structural and optical properties and propose a consistent mechanism explaining their green PL characteristics. Moreover, we demonstrate that structure and photostability of CDs integrated into TiO2 photoanodes are of critical relevance to achieve enhanced photoelectrochemical water splitting performance towards hydrogen production., Research project PID2022-139671OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the European Union. Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene oxide @ enamino-xanthene charge transfer complexes for TiO2 photoelectrode sensitization

  • Martínez-Barón, Carlos
  • Garrido Zoido, Juan Manuel
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Gil, María Victoria
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Work presented at the HeteroNanoCarb 2025 conference, 13-17 January 2025, in Benasque, (Aragon), Spain., Graphene oxide (GO) is a versatile nanomaterial with unique possibilities for the generation of novel hybrid materials of great interest in photoelectrochemical applications. In the present work, we report the combination of GO with enamino-xanthenes, which are a class of highly fluorescent dyes produced through a sustainable catalyst-free synthesis [1]. The optoelectronic properties of the resulting hybrid nanomaterial reveal the successful generation of GO @ enamino-xanthene charge transfer complexes. Subsequently, the GO @ enamino-xanthene hybrids were deposited as dye sensitizers onto for TiO2 film photoelectrodes. Tested in a photoelectrochemical cell under water splitting conditions [2], the GO @ enamino-xanthene sensitized TiO2 photoelectrodes display a 3.5-fold photocurrent increase compared to bare TiO2 photoelectrodes. We demonstrate that the enhancement is caused by two factors: increased light absorption capability and enhanced charge transfer of the photoelectrode [3]. These results pave the way towards sustainable GO-based sensitizing materials for enhancing the efficiency of photoelectrodes in photoelectrochemical applications., Research project PID2022-139671OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the European Union. Recognized Research Group T03_23R funded by Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Influence of physicochemical and crystallographic properties on the photoactivity of TiO2 nanoparticles

  • Martínez-Barón, Carlos
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
Conference paper presented at the ISCME 2024: International Scientific Conference Management and Engineering, 23trd-27th June, 2024; in Sozopol (Bulgaria)., Titanium dioxide nanoparticles (TiO2 NPs) are photocatalytical active materials of great interest for energy management and environmental applications. Among others, they enable enhanced conversion of solar energy into hydrogen as a strategic future energy carrier or the oxidative degradation of contaminants in water, thus addressing critical issues of water remediation. Combined with the large surface area of TiO2 nanoparticles, their relevance relates to their processing ability to form sustainable waterborne inks towards the fabrication of films serving as photoelectrodes in photoelectrochemical or photocatalytic processes. In this chapter, we systematically characterize the physicochemical properties of TiO2 NPs from various sources. We show how these directly influence the optical properties in respective inks as well as the morphological characteristics when processed into films. Analyzing the photoelectrochemical behavior of respective photoelectrodes under water-splitting conditions, we disclose the close relationship between the physicochemical properties of TiO2 NPs regarding their ability to form aggregates in the liquid phase and the photoelectrochemical performance of respective photoelectrodes. These findings highlight the need for an appropriate choice of TiO2 NPs for a specific photoelectrochemical or photocatalytic application., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A Way of making Europe” under project grants PID2022-139671OB-I00, as well as by the Gobierno de Aragón (DGA, T03_23R) Grupos de Investigación Reconocidos is acknowledged. C.M-B is thankful for his PhD contract funded by DGA (Ref. CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Carbon nanomaterials-based inks and electrodes using chitin nanocrystals [Dataset]

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Under a Creative Commons BY 4.0 license., Additional experimental details, including the surface conditioning of CNMs and the characterization of CNMs and ChNCs along with their combinations, further information about the different CNM/ChNC inks behavior and their subsequent films, and calculations regarding the CNM concentration as well as the electrical conductivity and the standard electrochemical constant, 1. Surface conditioning of CNMs and characterization...........................................S3 2. Calculation of the CNMs concentration post centrifugation ..............................S6 3. Dynamic light scattering results of fresh and redispersed ChNCs.........................S7 4. Morphological characterization of ChNCs................................................................S8 5. Sheet resistance results of the SWCNT/ChNC films..........................................S10 6. Characterization of the CNM/ChNC dispersions...............................................S11 7. Purity index of SWCNT/ChNC dispersions ........................................................S13 8. Homocoagulation analysis of SWCNT/ChNC and MWCNT/ChNC dispersions..S15 9. Sheet resistance results of the CNM/ChNC films..............................................S16 10. SEM images of the CNM/ChNC films ................................................................S17 11. Calculation of the CNM/ChNC films electrical conductivity..............................S18 12. XPS measurements of the CNM/ChNC films..........................................................S19 13. Contact angle measurements of the CNM/ChNC films ....................................S22 14. Calculation of the standard electrochemical rate constant..............................S23 15. References ........................................................................................................S25, Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide–enamino-xanthene charge-transfer hybrids as high-performance sensitizing interfaces for TiO2 photoanodes

  • Martínez-Barón, Carlos
  • Garrido Zoido, Juan Manuel
  • Álvarez Sánchez, Miguel Ángel
  • Cintas, Pedro
  • Palacios, Juan C.
  • Ansón-Casaos, Alejandro
  • Gil, María Victoria
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 figures, 3 tables., Hybrid materials that combine visible-light absorption with efficient charge separation across interfaces are essential for advancing photoelectrochemical (PEC) energy conversion technologies. In this study, we report the synthesis of charge-transfer hybrids composed of graphene oxide (GO) and enamino-xanthene (NH2-X) dyes, prepared via a simple and sustainable liquid-phase mixing approach. Spectroscopic analyses reveal strong interface interactions between GO and NH2-X, leading to suppressed fluorescence and altered electronic transitions, consistent with ground-state charge-transfer processes. When interfaced with TiO2 as a sensitizing layer, the resulting photoanodes deliver a 3.5-fold enhancement in photocurrent, faster saturation kinetics, and improved photopotential generation under visible-light illumination. Electrochemical impedance spectroscopy confirms reduced interface resistance and enhanced charge carrier mobility at both solid–solid and solid–liquid interfaces. The synergistic integration of GO and NH2-X establishes a high-performance sensitizing interface for TiO2 photoanodes, offering a scalable and environmentally benign route toward advanced PEC applications., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00 and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) are acknowledged. The UEx team thanks the Junta de Extremadura/Fondo Europeo de Desarrollo Regional (FEDER)–European Regional Development Fund (“ERDF-A way of making Europe”) for financial assistance through Grant GR24020. C.M.-B. thanks the DGA for funding his PhD contract (ref. CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3-component (N, Fe, Co) atomically dispersed ORR catalysts prepared by laser-driven decomposition of organic precursors

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Martínez, Gema
  • Balas, Francisco
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Simonelli, Laura
  • Bartolomé, Fernando
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, José L.
  • Santamaría, Jesús
Data will be made available on request., The sluggish kinetics of the oxygen reduction reaction (ORR) remain a key bottleneck for the commercialization of proton exchange membrane fuel cells (PEMFCs), driving the search for efficient, non-precious metal catalysts. Herein, we present a laser-assisted pyrolysis strategy for the synthesis of nitrogen-doped carbon (NC) materials, both metal-free and containing atomically dispersed Fe and Co, using aerosolized phthalocyanine precursors and a near-instantaneous rapid decomposition under a high-energy laser beam, while preventing metal aggregation. A single-step post-synthetic thermal activation under an NH₃/N₂ atmosphere further tailors the textural and surface properties, without requiring ammonia co-feeding during laser pyrolysis, acid etching, or multiple treatments, marking a significant improvement over our previously reported single atom (Fe-N/C) protocols. The resulting Fe_Co/NC_tr catalyst exhibits high specific surface area, enhanced microporosity, improved graphitization, and increased abundance of electrochemically beneficial nitrogen sites. Compared to our earlier reported Fe–N/C catalysts, Fe_Co/NC_tr delivers significantly higher limiting current densities and enhanced durability in alkaline media. Overall, the developed Fe_Co/NC catalyst exhibits good ORR catalytic activity and outstanding long-term stability in alkaline media, comparable to the state-of-the-art commercial Pt/C catalysts. Cyanide poisoning tests confirm the essential role of atomically dispersed Fe2+ and Co2+ as active ORR sites., The authors thank funding from the Spanish Research Agency and MICN/AEI (projects CNS2022-135911 (J.L.), PID2020-114926RB-I00 (J.S.), PID2022-139671OB-I00 (W.M. and A.B) and PID2023-146481OB-I00 (E.G.). Severo Ochoa funds (CEX2023-001286-S) are acknowledged by MICIU/AEI/10.13039/501100011033. Financial support from Diputación General de Aragón under project T57_23R (J.S.) and T03_23R (W.M., A.B., E.G., A.A.) (Grupos Reconocidos), Project “ERDF A way of making Europe” by the European Union is gratefully acknowledged. EP thanks Juan de la Cierva Formación postdoctoral fellowship (JDC2022-049007-I) financed by MICIU/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo Peña, Víctor
  • Maya Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
Data will be made available on request., The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design., Financial support from the Spanish MCIN/AEI/10.13039/501100011033 and ‘‘ERDF A way of making Europe’’ by the European Union under project grants PID2022-139671OB-I00, PID2023-146481OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA), in the R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24), and through the grants to research groups (Grupo Reconocido DGA-T03_23R) is acknowledged. L.G. thanks the DGA for funding his PhD contract (ref. CUS/702/2022)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, Ana M.
  • Galán, Alejandro
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
8 figures, 3 tables., The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films., Funding from Spanish MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00, and PID2023-151080NB-I00, as well as from the Gobierno de Aragón (DGA) T03_23R, and E13_23R (Grupos de Investigación Reconocidos DGA), is acknowledged. R.A also acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU as well as the support from the Spanish Severo Ochoa Excellence Programme MICIU/AEI, CEX2023-001286-S MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information of Graphene oxide–enamino-xanthene charge-transfer hybrids as high-performance sensitizing interfaces for TiO2 photoanodes [Dataset]

  • Martínez-Barón, Carlos
  • Garrido Zoido, Juan Manuel
  • Álvarez Sánchez, Miguel Ángel
  • Cintas, Pedro
  • Palacios, Juan C.
  • Ansón-Casaos, Alejandro
  • Gil, María Victoria
  • Benito, Ana M.
  • Maser, Wolfgang K.
Under a Creative Commons license BY 4.0., Section S1.Synthesis and characterization of enamino-xanthenes.-- Section S2. Characterization of graphene oxide.-- Section S3. UV-Vis spectra of NH2-X and NH2-X – GO.-- Section S4. UV-Vis spectra of GO.-- Section S5. Photoluminescence emission spectra of NH2-X – GO at 315 nm .-- Section S6. Fluorescence lifetime of NH2-X and quenching mechanism .-- Section S7. FE-SEM of TiO2/NH2-X – GO photoanodes.--Section S8. Preconditioning of the hybrid photoanodes.-- Section S9. Effect of illumination conditions.-- Section S10. Stabilization of dye sensitized photoanodes.-- Section S11. Isolated role of GO in TiO2 photoanodes.-- References, Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00 and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) are acknowledged. The UEx team thanks the Junta de Extremadura/Fondo Europeo de Desarrollo Regional (FEDER)–European Regional Development Fund (“ERDF-A way of making Europe”) for financial assistance through Grant GR24020. C.M.-B. thanks the DGA for funding his PhD contract (ref. CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical detection of sulfamethoxazole in water matrices using green nanomaterials: pilot-scale validation in a solar photo-Fenton process

  • Calvo Peña, Víctor
  • Venegas, Constanza J.
  • Sierra-Rosales, Paulina
  • Miralles Cuevas, Sara
  • Cabrera-Reina, A.
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 4 tables., This work presents an electrochemical sensor designed as a process-monitoring tool for tracking sulfamethoxazole (SMX) during advanced oxidation processes (AOPs) under pilot-scale, realistic wastewater conditions. The sensor is based on eco-friendly aqueous inks combining carbon nanomaterials with nanostructured biopolymers, specifically carbon nanofibers with cellulose nanocrystals (CNF/CNC) or multiwalled carbon nanotubes with chitin nanocrystals (CNT/ChNC), which were deposited onto glassy carbon electrodes (GCEs) to enhance the electrochemical response toward SMX. Among the tested configurations, the CNF/CNC-based sensor exhibited the best performance for SMX monitoring in the mg L−1 concentration range, combining a wide linear response and a detection limit of 0.17 mg L−1 with robust, reproducible behavior. Sensor calibration and performance were evaluated in both ultrapure water and synthetic hospital wastewater, highlighting the impact of matrix effects while confirming reliable operation under complex conditions. Crucially, the sensor was validated during the monitoring of SMX degradation in a pilot-scale solar photo-Fenton process operated at circumneutral pH using Fe3+-EDDS as a catalyst, with electrochemical measurements showing excellent agreement with UHPLC-DAD reference analyses (Pearson's r > 0.99). Rather than targeting ultra-trace detection, this study demonstrates the potential of electrochemical sensing as a rapid, cost-effective, and near-real-time tool for process monitoring and control in high-load effluents, such as hospital and pharmaceutical wastewater. These results bridge the gap between laboratory-scale sensor development and operational wastewater treatment applications, highlighting the relevance of sustainable nanocarbon–biopolymer inks for real-world environmental monitoring., Emerging contaminants in wastewater represent a growing environmental challenge due to their persistence and potential health risks. Traditional detection methods are often costly, complex, or environmentally harmful. This study introduces an eco-friendly electrochemical sensor using carbon nanomaterials dispersed with biobased nanocrystals (cellulose or chitin), without toxic solvents and surfactants. Validated under realistic conditions, including pilot-scale solar photo-Fenton treatment, the sensor enables real-time, scalable monitoring of pollutants. Its green fabrication and operational simplicity make it suitable for decentralized water quality control. By enhancing contaminant detection through green materials and methods, this work supports safer water reuse and contributes directly to UN Sustainable Development Goal 6 (Clean Water and Sanitation), promoting access to clean water through innovative and sustainable technologies., This work was supported by the Spanish MCIN/AEI and “ERDF A way of making Europe” [PID2022-139671OB-I00, PID2023-147116OB-I00], Gobierno de Aragón (DGA) [T03_23R (Grupos de Investigación Reconocidos), CUS/581/2020 (PhD contract) (V. C.), CUS/1668/2022 (research stay) (V. C.), R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24)], ANID-FONDECYT [no. 1231258 (P. S.-R.), no. 11240700 (C. J. V.)], and ANID-FONDAP [No. 1523A0006 (S. M.-C.; A. C.)]. Dr. Miralles-Cuevas would like to acknowledge the RYC2023-042474-I grant, funded by MCIU/AEI/10.13039/501100011033 and the FSE+. SEM images were obtained thanks to the project supported by the “Plan de Fortalecimiento de Universidades Estatales 2019, UTM1999, MINEDUC” (Chile). A. Cabrera would like to acknowledge CNS2024-154926, supported by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based PEDOT: nanocellulose hybrids as efficient hole-transport layers for photoelectrochemical devices

  • Domínguez Alfaro, Antonio
  • Galán, Alejandro
  • Hernández-Ferrer, Javier
  • Colom, E.
  • González Domínguez, José Miguel
  • Linares-Barranco, Bernabé
  • Maser, Wolfgang K.
  • Benito, Ana M.
4 figures, 1 table., Developing sustainable hole-transport materials that can match the performance of conventional poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) remains a key challenge for environmentally compatible optoelectronic devices. In this work, nanocrystalline cellulose (NCC) is demonstrated as a renewable dopant and stabilizer for PEDOT, forming bio-based hybrids with competitive photoelectrochemical performance. Two crystalline allomorphs, NCC Type I and NCC Type II, were compared as templates for aqueous oxidative polymerization of EDOT, producing stable dispersions of PEDOT nanoparticles (50–100 nm) electrostatically anchored to the NCC surface. Spectroscopic and thermal analyses revealed that the higher ester sulfate content and distinct morphology of NCC-II promoted enhanced polaron stabilization and 10–15% higher PEDOT incorporation compared to NCC-I. FTIR and UV–vis spectroscopy showed more pronounced polaronic bands for PEDOT:NCC-II hybrids, evidencing enhanced charge delocalization and doping. Optimal performance was achieved for the PEDOT:NCC-II (50 : 50) composition, which formed stable, conductive networks and served as an efficient hole-transport layer in poly(3-hexylthiophene)-based photoelectrochemical devices. These bio-based electrodes achieved photocurrent densities above 18 µA cm−2, matching or exceeding PEDOT:PSS reference, and maintained stable operation over 300 s of cycling (>10 light/dark cycles at 0.3 Hz) with reproducible ON/OFF photoresponse. These findings establish nanocellulose-doped PEDOT as a sustainable alternative for next-generation optoelectronic interfaces., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA) under projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24) and T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A. D.-A and B. L.-B. acknowledges the great momentum, hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union's Next Generation funds ID: MMT24-IMSE,CNM-02., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidrogeles y aerogeles de nanocristales de celulosa y de quitina como precursores de carbones porosos nanoestructurados

  • Güemes, Lucas
  • Calvo Peña, Víctor
  • Maya Segura, Vanessa B.
  • Pires, Elísabet
  • Pozo Gonzalo, Cristina
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
Trabajo presentado en la XVII Reunión del Grupo Español del Carbón, celebrada en Zaragoza del 19 al 22 de octubre de 2025., Proyecto PID2022-139671OB-100 y PID2023-147116OB-I00 financiada por MCIN/AEI/10.13039/501100011033 y “FEDER Una manera de hacer Europa”; Grupo de Investigación Reconocido T03_23R del Gobierno de Aragón (DGA); Proyectos de I+D+i en líneas prioritarias y de carácter multidisciplinar PROY_T41_24 (DGA)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, C.
  • Calvo, V.
  • Hernández-Ferrer, J.
  • Villacampa, B.
  • Ansón-Casaos, A.
  • González-Domínguez, J. M.
  • Maser, W. K.
  • Benito, A. M.
Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanomaterials-Based Inks and Electrodes Using Chitin Nanocrystals

  • Calvo, Víctor
  • Martínez-Barón, Carlos
  • Vázquez-Conejo, Benjamín
  • Domínguez-Alfaro, Antonio
  • Paleo, Antonio J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González-Domínguez, José M.
Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrids of Deep HOMO Organic Cyanoacrylic Acid Dyes and Graphene Nanomaterials for Water Splitting Photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles/g-C<sub>3</sub>N<sub>4</sub> Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

  • Galán-González, Alejandro
  • Fernández, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3-component (N, Fe, Co) atomically dispersed ORR catalysts prepared by laser-driven decomposition of organic precursors

  • Pakrieva, Ekaterina
  • Hernandez-Ferrer, Javier
  • Martinez, Gema
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Anson-Casaos, Alejandro
  • Simonelli, Laura
  • Bartolome, Fernando
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
  • Santamaria, Jesus
The sluggish kinetics of the oxygen reduction reaction (ORR) remain a key bottleneck for the commercialization of proton exchange membrane fuel cells (PEMFCs), driving the search for efficient, non-precious metal catalysts. Herein, we present a laser-assisted pyrolysis strategy for the synthesis of nitrogen-doped carbon (NC) materials, both metal-free and containing atomically dispersed Fe and Co, using aerosolized phthalocyanine precursors and a near-instantaneous rapid decomposition under a high-energy laser beam, while preventing metal aggregation. A single-step post-synthetic thermal activation under an NH₃/N₂ atmosphere further tailors the textural and surface properties, without requiring ammonia co-feeding during laser pyrolysis, acid etching, or multiple treatments, marking a significant improvement over our previously reported single atom (Fe-N/C) protocols. The resulting Fe_Co/NC_tr catalyst exhibits high specific surface area, enhanced microporosity, improved graphitization, and increased abundance of electrochemically beneficial nitrogen sites. Compared to our earlier reported Fe–N/C catalysts, Fe_Co/NC_tr delivers significantly higher limiting current densities and enhanced durability in alkaline media. Overall, the developed Fe_Co/NC catalyst exhibits good ORR catalytic activity and outstanding long-term stability in alkaline media, comparable to the state-of-the-art commercial Pt/C catalysts. Cyanide poisoning tests confirm the essential role of atomically dispersed Fe2+ and Co2+ as active ORR sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, A.M.
  • Galán-González, A.
  • Arenal, R.
  • Ansón-Casaos, A.
  • Maser, W.K.
The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo, Víctor
  • Álvarez-Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González-Domínguez, José Miguel
Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ohm Sq-1. Furthermore, we demonstrate that postdeposition thermal treatment at 450 1C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and lectrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning 2e− and 4e− oxygen reduction pathways in laser-driven FeC electrocatalysts for H2O2 production and Zn–air batteries

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Rueda-Flores, Ana
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Ansón-Casaos, Alejandro
  • Usoltsev, Oleg
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
Electrocatalytic oxygen reduction plays a central role in electrochemical energy technologies and in the production of hydrogen peroxide. Achieving selective control over the two-electron (2e−) and four-electron (4e−) oxygen reduction reaction (ORR) pathways within a single catalyst platform remains challenging. Here, we report a laser-driven synthesis of Fesingle bondC nanostructures that enables tunable ORR selectivity through controlled post-treatment. Air annealing at 300 °C yields high H2O2 selectivity (~75% at 0.65 V vs RHE), attributed to oxygen-rich groups and well-developed mesoporosity. Notably, with an optimized 2-electron catalyst, 80 ppm of H2O2 with 94% faradaic efficiency was achieved after 24 h of electrolysis. In contrast, an ammonia based (NH3/N2) treatment at 900 °C promotes the formation of a microporous structure and the incorporation of nitrogen species, resulting in selective water production (~86% at 0.65 V vs RHE). The 4-electron catalyst delivers power and stability comparable to Pt/GC in a primary zinc–air battery. These findings demonstrate a practical approach for tuning ORR selectivity within a Fe-containing carbon-based platform, using scalable processing and trace Fe contents (<0.1 wt%) with Fe present as atomically dispersed sites, limiting leaching and Fenton-type reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantitative correlation between cyclic voltammetry and electrochemical impedance spectroscopy models on TiO2 film electrodes

  • Ansón-Casaos, Alejandro
  • Ciria, José C.
  • Esteban-Tello, Pedro
  • Galán-González, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) are widely used to characterize semiconductor electrodes, yet their quantitative equivalence is not often established. Here, we introduce a model framework that clarifies when CV and EIS probe the same physical processes and when they diverge on TiO2 film photoelectrodes with controlled thickness and morphology. EIS measurements are registered at different potentials, covering the whole CV window, and show a progressive evolution. In the general case, outside the charge-accumulation regime, the low-frequency limit of EIS converges quantitatively with a density-of-states-based CV description, demonstrating that both techniques capture identical electronic responses. At more cathodic potentials, systematic deviations arise: EIS yields larger capacitances and lower Faradaic resistances than CV. These discrepancies possibly originate from the different timescales of the techniques, as the longer polarization of EIS may activate slow electrochemical processes that are kinetically inaccessible during CV. The divergence between CV and EIS therefore suggests an onset for different charge transport regimes. In this way, the proposed framework provides a predictive diagnostic tool for TiO2 film electrodes, supporting a consistent interpretation and cross-validation of classical CV and EIS data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo, Víctor
  • Maya-Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, Enrique
  • González-Domínguez, José M.
The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design.