Pasar al contenido principal

DISEÑO Y EVALUACION DE SISTEMAS PI CONJUGADOS PARA APLICACIONES OPTICAS Y FOTOVOLTAICAS

PID2019-104307GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table.-- Supplementary information available., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Earth-abundant non-toxic perovskite nanocrystals for solution processed solar cells

  • Aina, Sergio
  • Villacampa, Belén
  • Bernechea, María
Semiconductor nanocrystals, used in quantum dot solar cells, are interesting materials for photovoltaics because they can be obtained in solution and can be composed of abundant elements. Moreover, as compared to other photovoltaic materials, nanomaterials show unique features due to their novel size- and shape-dependent properties such as band gap tuning, multiple exciton generation, and modulation of n- or p-type behaviour by doping or by modifying the ligands on the surface of the nanocrystals. Quantum dot solar cells, together with perovskite solar cells, are the latest incorporation to photovoltaic technologies and have already shown impressive progress in efficiencies and great promise as alternatives to commercial solar cells. However, in all cases, the highest efficiencies are obtained with materials that contain lead in their composition. To solve the problem of toxicity, several materials have been proposed as substitutes. In this review, we summarize some of the non-toxic alternatives that have been synthesized as nanocrystals and incorporated in photovoltaic solar cells, specifically: tin (Sn), germanium (Ge), bismuth (Bi), and antimony (Sb)-based materials. Our findings show that this field has been scarcely covered; there are very few reports on non-toxic perovskite nanocrystals incorporated in solar cells and in general, the efficiencies are still modest. However, this area deserves more attention since some nanocrystal-based solar cells already outperform bulk counterparts. For each case, we also discuss factors limiting efficiency, the approaches followed to overcome these limitations, and the possible solutions to improve efficiency., Authors acknowledge Fundación Iberdrola España, CIBER-BBN (financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund), the ICTS “NANBIOSIS”, Agencia Estatal de Investigación-AEI (Ref. PID2019-107893RB-I00 and PID2019-104307GB-I00), and Gobierno de Aragón (Ref. T57_20R and E47_20R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twisted one-dimensional charge transfer and related Y-shaped chromophores with a 4H-pyranylidene donor: Synthesis and optical properties

  • Tejeda-Orusco, Víctor
  • Andreu, Raquel
  • Orduna, Jesús
  • Villacampa, Belén
  • Franco, Santiago
  • Civera, Alba
Three series of push–pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the π-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C═C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV–visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower μβ values (except for thiobarbiturate derivatives)., Financial support from the Ministerio de Ciencia e Innovación (PID2019-104307GB-I00/AEI/10.13039/501100011033), Gobierno de Aragón-FEDER-Fondo Social Europeo 2014–2020 (E14_17R), and University of Zaragoza (UZ2019-CIE-01) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela, Sergio
  • Neusser, David
  • Benitez-Martin, Carlos
  • Nájera, Francisco
  • Guadix, Juan A.
  • Moreno-Yruela, Carlos
  • Villacampa, Belén
  • Ponce Ortiz, Rocío
  • Ludwigs, Sabine
  • Andreu, Raquel
  • Ruiz Delgado, M. Carmen
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the π-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D–A–D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications., The work at the University of Málaga was funded by the MICINN (PID2019-110305GB-I00, PID2019-104293GB-I00, RTI2018-095410-B-I00, EuroNanoMed 2019 PCI2019-111825-2), the Institute of Health Carlos III (ISCIII) RETIC ARADYAL (RD16/0006/0012) and by the Junta de Andalucıa (P09-FQM-4708, UMA18-FEDERJA-080, UMA18-FEDERJA-007, PIER-0084-2019). The work at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R). The work at the University of Stuttgart was funded by the German Science Foundation (DFG) through the project “LU 1445/7-1, project number 416982273” on electrooptical hybrid modulators, C. Malacrida is acknowledged for discussions. S. G.-V. thanks the MINECO for a FPU predoctoral fellowship (FPU17/04908) and CB-M for FPU fellowship (FPU16/02516). Computer resources, technical expertise and assistance provided by the SCBI (Supercomputing and Bioinformatics) centre of the University of Málaga are gratefully acknowledged. We thank the Vibrational spectroscopy lab (EVI) of the Research Central Services (SCAI) of the University of Málaga and John Pearson (BIONAND) for help with laser confocal microscopy analysis. We gratefully acknowledge the ICTS “NANBIOSIS” facilities, more specifically the U28 Unit of the Andalusian Centre for Nanomedicine & Biotechnology (BIONAND), for their help with the 2PA characterization and the microscopy studies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Caracterización de un recubrimiento de grafeno en un fotoánodo de TiO2 sensibilizado con un nuevo colorante de tipo D-pi-A

  • Ansón-Casaos, Alejandro
  • Angoy, Sergio
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Trabajo presentado en la XV Reunión del Grupo Español del Carbón, celebrada del 24 al 27 de abril de 2022 en Granada (España)., Los sistemas híbrido formados por un óxido semiconductor y un colorante orgánico están siendo muy estudiados con vistas al aprovechamiento de luz solar en celdas fotovoltaicas o foto-electrolíticas. En particular, el uso de colorantes de tipo dador-π-aceptor (D-π-A), que no contienen átomos metálicos, resultaría muy conveniente en la producción directa de hidrógeno verde. Sin embargo, uno de los inconvenientes que suelen presentar los colorantes orgánicos es su estabilidad química limitada. Una posible solución sería encontrar un recubrimiento protector que no perjudique a la eficiencia. Con esa idea, hemos depositado una capa de óxido de grafeno (GO) sobre un fotoánodo de TiO2/FTO/vidrio, en el que previamente se había adsorbido un nuevo colorante orgánico D-π-A (AT-Pyri). El sistema fue estudiado mediante microscopía electrónica, espectroscopía Raman y técnicas fotoelectroquímicas en medio neutro., Proyectos financiados por el MICINN y la AEI (PID2019-104272-RB-C51/AEI/10.13039/501100011033 y PID2019-104307GB-I00/AEI/10.13039/501100011033) y el Gobierno de Aragón (Grupo Reconocido T03-20R y E47-20R). Se agradece la colaboración de la Universidad de Zaragoza a través de Universa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the temporal stability of DSSCs with novel vinylpyrimidine anchoring and accepting group

  • Duerto, Isolda
  • Sarasa, Santiago
  • Barrios, Daniel
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
Three compounds based on aniline, thiophene and vinylpyrimidine as anchoring group have been prepared and studied as light harvesting units for dye-sensitized solar cells (DSSCs). They comprise thiophenyl π-spacer systems with one or two thiophenes (AT-Pyri, ATT-Pyri) and aniline as donor which is functionalized, in one case, with an hydroxyl group (HO-AT-Pyri). The bithiophene based dye (ATT-Pyri) shows higher extinction coefficients and smaller transition energy, as well as broader absorption spectrum. Thus, despite lower dye uptake, devices based on one thiophene and with the hydroxyl group (HO-AT-Pyri) have slightly higher power conversion efficiencies (η) as compared with the analogous dye without this group (AT-Pyri). However, the best performing device is based on the dye with bithiophene bridge (ATT-Pyri) when a co-adsorbent is added to avoid the aggregation of the dye. The photovoltaic parameters of cells based on these vinylpyrimidine dyes are enhanced over 1000 h, especially for ATT-Pyri devices, which reach a η = 6,4%., We gratefully acknowledge the financial support from Gobierno de España. Ministerio de Ciencia e Innovación-MCIN/AEI/10.13039/501100011033 (Project PID2019-104307 GB-I00) and Gobierno de Aragón-Fondo Social Europeo (E47_20R). The authors are grateful to Mr L. Arnal for carring out the ATR experiments. ID and DB acknowledge for the financial support of Gobierno de Aragón-Fondo Social Europeo fellowship and PhD studentship Santander-2018 programs, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyranylidene/trifluoromethylbenzoic acid-based chromophores for dye-sensitized solar cells

  • Royo, Raquel
  • Domínguez-Celorrio, Amelia
  • Franco, Santiago
  • Andreu, Raquel
  • Orduna, Jesús
The synthesis and photovoltaic study of five dyes based on 4H-pyranylidene moiety as donor moiety is reported. A thiophene unit conjugated with/without an ethynyl bond acts as the π-relay and benzoic acid as the anchor group with/without a trifluoromethyl group. Their electrochemical and optical properties are analyzed by using a joint experimental and theoretical approach. The presence of the trifluoromethyl group leads to an enhancement of the molar extinction coefficient, being slightly when a hexyl chain is introduced in the thiophene ring, but does not modify the oxidation potential., For the preparation of derived solar cells an antiaggregant is essential in all cases. The photovoltaic performance is sensitive to the structural modification of the dye: the CF3 group and the hexyl chain of the thiophene spacer were shown to improve the efficiency. The lack of a triple bond in the π-spacer involves a lower photovoltaic efficiency, and the trifluoromethyl group leads to a lower dye-load, but a decrease of the recombination processes. These results are in accordance with the electrochemistry impedance spectroscopy studies carried out. Moreover, the organic dyes have been also tested with a fluorescent lamp (indoor conditions), leading to an increase of the efficiency, reaching a 36% for the best dye., Financial support from Ministerio de Ciencia e Innovación (PID2019-104307 GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón-FEDER-Fondo Social Europeo (E47_20R) is gratefully acknowledged. R. Royo acknowledges for the financial support of Gobierno de Aragón: Fellowship program 2018–2022 period co-financed with the Operational Program FSE Aragón 2014-202., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Angoy, Sergio
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
7 figures., Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear., Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104307GB-I00/AEI/10.13039/501100011033, and the Diputación General de Aragón-European Social Found under projects T03-20R and E47-20R is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3D structures

  • González Domínguez, José Miguel
  • Baigorri, Alejandro
  • Álvarez Sánchez, Miguel Ángel
  • Colom, E.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • García-Bordejé, José Enrique
  • Benito, Ana M.
  • Maser, Wolfgang K.
11 figures, 1 table., In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray- or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures., This research was funded by Spanish MINEICO/MICINN, under project references ENE2016-79282-C5-1-R (AEI/UE/FEDER) and PID2019-104272RB-C51/AEI/10.13039/501100011033, and the Gobierno de Aragón (Grupo Reconocido DGA-T03_20R). J.M.G.-D. greatly acknowledges Spanish MINEICO for his ‘Juan de la Cierva Incorporation’ contract and associated research funds (ref. IJCI-2016-27789). The APC predoctoral contracts of E.C. and M.Á.Á.-S. were funded by the Spanish MINEICO (BES2017-080020, including EU Social Funds) and the Gobierno de Aragón, respectively. The work performed at the University of Zaragoza was funded by the MICINN (PID2019-104307GB-I00/AEI/10.13039/501100011033) and Gobierno de Aragón (E47_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC

  • Pizarro-Castillo, L.
  • Mera, Adriana C.
  • Cabello-Guzmán, G.
  • Bernal, C.
  • Bizarro, Monserrat
  • Carrasco, Claudia
  • Blesa, María Jesús
  • Rodríguez, C. A.
In this work, BiOCl films were obtained by tape casting using BiOCl powders synthesized by the co-precipitation method. The effect of the film's sintering temperature (300 °C–600 °C) on the morphology, chemical composition, crystalline phases and optical characteristics was studied. The obtained BiOCl powders showed a flake-like morphology, a tetragonal crystalline structure without secondary phases and a wide band gap of 3.53 eV. For BiOCl films, results indicated that as the sintering temperature increased the flake-like shaped particles changed to rectangular ones while the amount of chlorine in the films decreased. A phase transition from tetragonal BiOCl to monoclinic Bi24O31Cl10 was also observed as the sintering temperature increased. Consequently, optical studies revealed that the band gap of BiOCl films decreased from 3.03 eV to 2.82 eV. FTIR analysis demonstrated that the organic groups were removed from the films only for sintering temperatures above 400 °C. The Rhodamine B dye adsorption capacity of BiOCl films decreased with increasing sintering temperature. The results obtained allow us to conclude that BiOCl films are suitable for use in DSSC when the sintering temperature is in the range of 400–500 °C., The authors acknowledge the National Agency for Research and Development by funding this research through the International Cooperation Program PCI-REDES Project N° 180038 and Solar Energy Research Center (SERC) FONDAP project No. 15110019. L. Pizarro acknowledges ANID for financing his Ph.D. studies (grant Doctorado Nacional 21220791). C.A. Rodríguez also acknowledges the financial support given by the University of La Serena through the DIDULS project N° PR19538513, project ID1953852 and project “FIULS 2030” N° 18ENI2-104235 from the “Nueva Ingeniería para el 2030 en Regiones - Etapa de Implementación” program funded by CORFO. M. J. Blesa acknowledges the financial support from the Spanish Ministry of Science and Innovation-MCIN/AEI/10.13039/501100011033 (Project PID2019-104307 GB-I00) and Gobierno de Aragón-Fondo Social Europeo (E47_20R).z, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary data for Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes [Dataset]

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Angoy, Sergio
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
General methods: Melting points were obtained on a Gallenkamp apparatus in open capillaries and are uncorrected. 1H and 13C-NMR spectra were recorded on a Bruker AV400 at 400 MHz and 100 MHz respectively; δ values are given in ppm (relative to TMS) and J values in Hz. The apparent resonance multiplicity is described as s (singlet), br s (broad singlet), d (doublet), t (triplet), q (quartet) and m (multiplet).1H-1H COSY and 1H-13C-HSQC experiments were recorded in order to establish peaks assignment. Electrospray mass spectra were recorded on a Bruker MicroToF-Q spectrometer and on a Bruker TIMS-TOF; accurate mass measurements were achieved using sodium formate as external reference. UV-Visible spectroscopy was performed with an UV-vis Cary 6000. Also, the quantity of dye adsorbed on the TiO2 anode was estimated by desorption experiments; the desorption solution of was 10-3 M NaOH in H2O/THF (20:80). Cyclic Voltammetry (CV) measurements were performed with a μ-Autolab ECO-Chemie potenciostat, using a glassy carbon working electrode, Pt counter electrode, and Ag/AgCl reference electrode. The experiments were carried out under argon, in CH2Cl2 with Bu4NPF6 as supporting electrolyte (0.1mol L-1). Scan rate was 100 mV s-1.-- Synthetic details: The aldehyde AT-CHO [1] (80 mg, 0.346 mmol), 4-methylpyrimidine (32 μL, 0.346 mmol) and Aliquat 336 (16 μL, 0.035 mmol) was refluxed in 5.2 mL NaOH (5M). The mixture was maintained during 1h, then was cooled and the precipitate was filtered off and washed with water. The aqueous phase was extracted with CH2Cl2 (3x20 mL). The organic phase was dried with MgSO4 and the solvent was removed under reduced pressure. The crude product was purified by flash chromatography increasing the polarity of the eluent hexane/ethyl acetate from 8:2 to 6:4 to obtain the desired product, an orange solid (51 mg, 48%). Molecular weight (g/mol): 307.41 Melting point at 760 mm Hg (˚C): 227.7 IR (KBr) ν (cm-1): 1571 (C=N) Uv-Vis data λmax (CH2Cl2)/nm 428 (ε/mol-1·dm3·cm-1 1.98 ± 0.02·104) 1H-NMR (CDCl3, 400 MHz) δ (ppm): 3.01 (s, 6H), 6.72 (d, J= 8Hz, 2H), 6.75 (d, J=16Hz, 1H), 7.11 (d, J = 4 Hz, 1H), 7.14-7.23 (bs, 2H), 7.51 (d, J = 8 Hz, 2H), 7.99 (d, J = 16 Hz, 1H), 8.62 (bs, 1H), 9.11 (s, 1H) 13C-NMR (CDCl3 , 100 MHz) δ (ppm): 40.5, 112.5, 118.5, 121.5, 123.0, 127.1, 130.8, 131.8, 138.4, 147.7, 150.1, 156.8, 158.5, 162.4. HRMS (ESI)+: Found [M+H]+ 308.1215; molecular formula C18H17N3S requires [M+H]+ 308.1216.-- Under a Creative Commons license CC-BY-NC-ND 4.0, 1. General methods 2. Synthetic details 3. Absorption spectra a. Figure S.1. UV-Vis Absorption spectra in CH2Cl2 and concentration dependence of AT-Pyri dye 4. Electrochemical characterization a. Figure S.2. CV analysis of AT-Pyri in CH2Cl2 b. Table S.1. Optical parameters, transition energy E0-0 and potential values Eox and Eox* 5. NMR spectra 6. References, Financial support from Spanish MICINN/AEI under projects PID2019-104272RB-C51/AEI/10.13039/501100011033 and PID2019-104307GB-I00/AEI/10.13039/501100011033, and the Diputación General de Aragón-European Social Found under projects T03-20R and E47-20R is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal-free dyes with deep HOMO level for TiO2 sensitization

  • Ansón-Casaos, Alejandro
  • Orduna, Jesús
  • Martínez-Barón, Carlos
  • Blanco Cambronero, Aitana
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at the XI Franco-Spanish Workshop IBERNAM-CMC2 – 9-10th November 2023, Zaragoza (Spain)., Photoelectrochemical (PEC) water splitting is being intensively studied as a method for green hydrogen production and artificial photosynthesis. Specifically, titanium dioxide (TiO2) nanoparticles show remarkable properties as a photocatalyst and for the preparation of nanostructured photoanodes. However, as a wide bandgap semiconductor, TiO2 is only active under UV irradiation, and sensitization with organic dyes would be a convenient strategy to improve its solar conversion efficiency. In our previous work, we studied the sensitization of the TiO2 electrode through the adsorption of a metal-free donor-π-acceptor (D-π-A) dye molecule (AT-Pyri) [1]. The AT-Pyri molecule consists of an aniline donor, thiophene π-spacer, and a pyrimidine unit as the acceptor part. We showed that the AT-Pyri/TiO2 electrode was in fact active for water splitting under a wide range of visible light wavelengths, up to 600 nm. However, the system visibly degraded during transient photocurrent measurements under potentiostatic conditions in the Na2SO4 aqueous electrolyte. As a possible source of instability, we considered the oxidation potential (Eox) of AT-Pyri, which was determined to be +0.88 V vs. SHE, thus above the O2/H2O reduction potential. In this work, we evaluate the energy levels of two alternative dye molecules by means of DFT theoretical calculations. In terms of the chemical structure, we follow a simplification strategy, resulting in π-A type molecules. We select the bithiophene ring as the π-spacer, and either cyanoacetic acid (-CNCOOH) or pyrimidine (Pyri) as the acceptor and anchoring group (Figure 1). Both dyes fulfil theoretical requirements to become TiO2 sensitizers in a water splitting process, with Eox > EO2/H2O (Table 1). Next, we perform the laboratory synthesis and characterization of both dyes, which show yellowish colors. Nanostructured TiO2 electrodes on FTO/glass substrates are prepared by screen printing, and dye adsorption is successfully accomplished by immersion of TiO2 electrodes in CH2Cl2 solutions. However, the TT-CNCOOH dye desorbs from the TiO2 support and is solubilized when the electrode is put in contact with electrolytic Na2SO4 and phosphate buffer solutions, so it is not used for PEC studies. The complete PEC characterization of the TT-Pyri/TiO2 electrode is performed in a 3-electrode cell with aqueous Na2SO4 electrolyte, and under simulated solar light irradiation. The electrode is stable under cyclic voltammetry conditions between -0.5 and 0.4 V vs. Ag/AgCl. Moreover, the electrode keeps its yellow color after a 5 min photocurrent measurement under light irradiation periods of 15 s and a constant potential of 0 V vs. Ag/AgCl. The photocurrent is multiplied by 1.6 and 12.5 In the presence of glycerol and triethanolamine as sacrificial agents, respectively. The dye sensitization effect was also proved by experiments using a monochromator. However, as it is observed after a continuous photocurrent measurement for 2 h, the long-time stability is still hindered by a slow unknown degradative mechanism, which requires further investigation, Financial support from Spanish MICINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2019-104272RB-C51, PID2022-139671OB-I00 and PID2019-104307GB-I00, and the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly efficient photoninitiators based on 4H-pyranylidene derivatives for two-photon laser printing

  • Royo, Raquel
  • Mainik, Philipp
  • Benitez-Martin, Carlos
  • Andreu, Raquel
  • Blasco, Eva
  • Nájera, Francisco
  • Villacampa, Belén
A series of four donor–acceptor–donor derivatives bearing 4H-pyranylidene and 4-methylcyclohexan-1-one units as donor and acceptor groups respectively is designed, synthesized, and photophysically characterized. Both experimental and theoretical studies reveal good two-photon absorption (2PA) properties for these systems. Decoration of the exocyclic position of the 4H-pyranylidene moiety with a thiophene ring results in high 2PA cross-section values (σ2PA) ≈700 nm, and remarkably, in the region between 900 and 1000 nm. Furthermore, all chromophores are evaluated as photoinitiators (PIs) for two-photon-laser printing at 780 nm, showing superior performance compared to the commonly used commercially available PI, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Among the studied PIs, the ones equipped with a thiophene unit at the exocyclic position of the 4H-pyranylidene moiety exhibit the highest efficiency, enabling fast printing using low laser powers with even lower concentrations of PI. Overall, this study shows the great potential of this new class of PIs for application in the field of 3D nanoprinting., Financial support from Ministerio de Ciencia e Innovación (PID2019-104307GB-I00/AEI/10.13039/501100011033 for Zaragoza group and PID2019-104293GB-I00 for F. Najera) and Gobierno de Aragón-FEDER-Fondo Social Europeo (E47_20R and E47_23R) is gratefully acknowledged. R.R. acknowledges the financial support of Gobierno de Aragón: Fellowship program 2018–2022 period co-financed with the Operational Program FSE Aragón 2014–2022. C.B.-M acknowledges Carl Tryggers Foundation for the Postdoctoral fellowship. E.B. acknowledges the funding from the Excellence Cluster “3D Matter Made to Order” (EXC-2082/1-390761711) and the Carl Zeiss Foundation through the “Carl-Zeiss-Foundation-Focus@HEiKA”., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel spiro-core dopant-free hole transporting material for planar Inverted perovskite solar cells

  • Royo, Raquel
  • Sánchez, José G.
  • Li, Wenhui
  • Martinez-Ferrero, Eugenia
  • Palomares, Emilio
  • Andreu, Raquel
  • Franco, Santiago
This article belongs to the Special Issue The Central Role of Interfaces in Metal Halide Perovskite-Based Devices., Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells., This research was financially supported by: Ministerio de Ciencia e Innovacion PID2019- 104307 GB-I00. Ministerio de Ciencia e Innovacion Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 (CEX2019-000925-S). Gobierno de Aragon-FEDER-Fondo Social Europeo (E47_20R and E47_23R). Gobierno de Aragon: Fellowship program 2018–2022. Operational Program FSE Aragón 2014-2022. Spanish Government PID2019-109389RB-I00. AGAUR 2021 SGR 01261. ICIQ, CERCA, and ICREA., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-Free counter electrodes for DSSCs based on nitrogen-doped reduced graphene oxide materials

  • Duerto, Isolda
  • Carrera, Clara
  • Barrios, Daniel
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Villacampa, Belén
  • García-Bordejé, José Enrique
  • Blesa, María Jesús
This article belongs to the Special Issue Recent Progress on Functional Dyes and Their Applications., The importance of counter electrodes in Dye Sensitized Solar Cells (DSSCs) cannot be neglected as they enable the transfer of electrons across the outer circuit, thereby facilitating the reduction reaction of the I3−/I− redox electrolyte. However, the dissolution and deposition of the usual platinum layer on the counter electrode has resulted in contamination concerns. To address this issue, metal-free counter electrodes made of reduced graphene oxide (rGO) aerogels were developed and their catalytic performance towards I3− reduction was evaluated. The reduced graphene materials were characterized, and the fitting analysis of XPS revealed the presence of various nitrogen species, with the primary peaks attributed to pyridinic and pyrrolic nitrogen. The hydrothermal treatment of graphene oxide (GO) resulted in a higher graphitic character and the intensification of the contacts between graphene nanosheets, which should entail higher electrical conductivity, both in-plane and between rGO sheets. Additionally, the presence of nitrogen-provided active sites promoted the catalytic reduction of the electrolyte. Encouragingly, good charge transfer rates were observed between the counter electrode and the electrolyte in the assembled DSSCs, resulting in good photocurrents and exceptional stability over the course of nearly 1200 h after cell assembly. The results obtained suggest that these GO-based systems are promising candidates for developing metal-free counter electrodes for DSSC, supporting the interest of further study., We gratefully acknowledge financial support from the Spanish Ministry of Science and Innovation (MICINN) and the Spanish Research Agency (AEI) under projects: PID2019-104307GB-I00/AEI/10.13039/501100011033; PID2019-104272RB-C51/AEI/10.13039/501100011033 and Gobierno de Aragón-Fondo Social Europeo (E47_23R, T03_23R). I.D. and D.B. acknowledge the financial support of the Gobierno de Aragón-Fondo Social Europeo fellowship and PhD studentship Santander-2018 programs, respectively. Finally, C.C. is grateful for her PhD grant from Gobierno de Aragón (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de un recubrimiento de grafeno en un fotoánodo de TiO2 sensibilizado con un nuevo colorante de tipo D-pi-A

  • Ansón-Casaos, Alejandro
  • Angoy, Sergio
  • Colom, E.
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Póster presentado en la XV Reunión del Grupo Español del Carbón, celebrada del 24 al 27 de abril de 2022 en Granada (España)., Proyectos financiados por el MICINN y la AEI (PID2019-104272-RB-C51/AEI/10.13039/501100011033 y PID2019-104307GB-I00/AEI/10.13039/501100011033) y el Gobierno de Aragón (Grupo Reconocido T03-20R y E47-20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing electron injection in D-A'-π-a dye sensitized solar cells: The role of electrolyte modification

  • Duerto, Isolda
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
Data will be made available on request., This study establishes a theoretical and technical pathway, based on electroanalytical methods, for an optimized design of DSSCs with balanced short-circuit current density (Jsc) and open-circuit voltage parameters (Voc). In this paper, isoindigo (iI) and benzothiadiazole (BTZ) are included as auxiliary acceptors in A-iI-Ph-SIL and A-BTZ-Ph-SIL dyes, respectively. The strength of auxiliary acceptors greatly influences the thermodynamic parameters governing the electron transfer process, as well as the proper distribution of electron density in orbitals. Theoretical calculations reveal that the isoindigo unit, in A-iI-Ph-SIL, exhibits a strong acceptor character that hinders charge transfer from the donor to the primary acceptor. However, in the A-BTZ-Ph-SIL, the moderate acceptor character of the benzothiadiazole unit allows charge movement across the molecule. Voltammetric analyses indicate that, in A-iI-Ph-SIL, the electron injection into the semiconductor is compromised because its excited state energy level is too close to the TiO2 conduction band edge. This fact limits the necessary driving force for efficient injection process. To overcome this, the influence of the iodide/triiodide electrolyte composition on the electrochemical properties is explored. A concentration of 0.1 M tert-butylpyridine yields the optimal efficiency in these devices. This particular concentration strikes the right balance between Jsc and Voc. Notably, this optimized concentration led to a significant 44 % improvement in DSSC efficiency compared to the conventional 0.5 M tert-butylpyridine concentration, achieving a maximum efficiency of 4.79 %. Electrochemical Impedance Spectroscopy indicates that better conversion efficiencies of the devices are linked to a high charge transfer resistance at the TiO₂/solvent interface., The authors thank the financial support from Spain MCIN/AEI/10.13039/501100011033 (Project PID2019-104307 GB-I00), Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033 and Gobierno de Aragón-Fondo Social Europeo (E47-23R) and also from Universidad de Zaragoza (UZ2023-CIE-01). ID acknowledge for the financial support of DGA fellowship program. The authors are grateful to D. Barrios for the help provided in the assembly of DSSCs and also would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Twisted One-Dimensional Charge Transfer and Related Y-Shaped Chromophores with a 4 H-Pyranylidene Donor: Synthesis and Optical Properties

  • Tejeda-Orusco, V.
  • Andreu, R.
  • Orduna, J.
  • Villacampa, B.
  • Franco, S.
  • Civera, A.
Three series of push-pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the p-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C= C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV-visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower µß values (except for thiobarbiturate derivatives).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

V-shaped pyranylidene/triphenylamine-based chromophores with enhanced photophysical, electrochemical and nonlinear optical properties

  • Gámez-Valenzuela S.
  • Neusser D.
  • Benitez-Martin C.
  • Najera F.
  • Guadix J.A.
  • Moreno-Yruela C.
  • Villacampa B.
  • Ponce Ortiz R.
  • Ludwigs S.
  • Andreu R.
  • Ruiz Delgado M.C.
We report the synthesis and comprehensive study of two chromophores based on 4H-pyranylidene moiety as a part of the p-conjugated spacer. Triphenylamine (TPA) acts as donor and tricarbonitrile-based electron-accepting groups complete these V-shaped D-A-D architectures (A, acceptor; D, donor). Their electrochemical, photophysical and nonlinear optical properties are analyzed in detail by using a joint experimental and theoretical approach. The two chromophores exhibit near-infrared fluorescence, large Stokes shift, enhanced emission in tetrahydrofuran/water mixtures and good photostability. Additionally, the dimerization of triphenylamine groups to tetraphenylbenzidine (TPB) takes place upon electrochemical and chemical oxidation showing their peculiar electrochemical behavior and film formation capabilities. Interestingly, high molecular first hyperpolarizabilities and two-photon absorption cross-sections were found, highlighting their potential applications in electro-optical devices. Overall, our work demonstrates that these near-infrared (NIR) fluorescent chromophores are versatile materials with a myriad of applications ranging from optoelectronics to biological applications. © 2021 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyranylidene/trifluoromethylbenzoic acid-based chromophores for dye-sensitized solar cells

  • Royo Sánchez, R.
  • Domínguez Celorrio, A.
  • Franco Ontaneda, S.
  • Andreu Solano, R.
  • Orduna, J.
The synthesis and photovoltaic study of five dyes based on 4H-pyranylidene moiety as donor moiety is reported. A thiophene unit conjugated with/without an ethynyl bond acts as the p-relay and benzoic acid as the anchor group with/without a trifluoromethyl group. Their electrochemical and optical properties are analyzed by using a joint experimental and theoretical approach. The presence of the trifluoromethyl group leads to an enhancement of the molar extinction coefficient, being slightly when a hexyl chain is introduced in the thiophene ring, but does not modify the oxidation potential. For the preparation of derived solar cells an antiaggregant is essential in all cases. The photovoltaic performance is sensitive to the structural modification of the dye: the CF3 group and the hexyl chain of the thiophene spacer were shown to improve the efficiency. The lack of a triple bond in the p-spacer involves a lower photovoltaic efficiency, and the trifluoromethyl group leads to a lower dye-load, but a decrease of the recombination processes. These results are in accordance with the electrochemistry impedance spectroscopy studies carried out. Moreover, the organic dyes have been also tested with a fluorescent lamp (indoor conditions), leading to an increase of the efficiency, reaching a 36% for the best dye. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stability of a pyrimidine-based dye-sensitized TiO2 photoanode in sacrificial electrolytes

  • Ansón-Casaos, A.
  • Martínez-Barón, C.
  • Angoy-Benabarre, S.
  • Hernández-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Blesa, M.J.
Dye sensitization of semiconductor metal oxides aims to extend the light absorption range into the visible region, of particular interest for their use as photoanodes in photoelectrochemical (PEC) water splitting. Organic dyes, however, suffer from limited chemical stability when they are exposed to constant potential and irradiation in aqueous media. Thus, in this work, we evaluate a novel metal-free donor-π-acceptor (D-π-A) dye (AT-Pyri), demonstrating significant sensitization of film photoanodes based on TiO2 nanoparticles. Among a series of tested sacrificial agents, the addition of triethanolamine (TEOA) to the sodium sulphate electrolyte prevents the degradation of AT-Pyri even after several hours of operation. Combining two sacrificial agents (methanol and TEOA) results in a synergetic improvement of the PEC water-splitting activity. Notably, the stabilization of the AT-Pyri photoanode is accompanied by a substantial increase in the photocurrent over the reference TiO2 photoanode, while the associated spikes in transient photocurrent measurements disappear.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC

  • Pizarro-Castillo, L.
  • Mera, Adriana C.
  • Cabello-Guzmán, G.
  • Bernal, C.
  • Bizarro, M.
  • Carrasco, C.
  • Blesa, María-Jesús
  • Rodríguez, C.A.
In this work, BiOCl films were obtained by tape casting using BiOCl powders synthesized by the co-precipitation method. The effect of the film's sintering temperature (300 °C–600 °C) on the morphology, chemical composition, crystalline phases and optical characteristics was studied. The obtained BiOCl powders showed a flake-like morphology, a tetragonal crystalline structure without secondary phases and a wide band gap of 3.53 eV. For BiOCl films, results indicated that as the sintering temperature increased the flake-like shaped particles changed to rectangular ones while the amount of chlorine in the films decreased. A phase transition from tetragonal BiOCl to monoclinic Bi24O31Cl10 was also observed as the sintering temperature increased. Consequently, optical studies revealed that the band gap of BiOCl films decreased from 3.03 eV to 2.82 eV. FTIR analysis demonstrated that the organic groups were removed from the films only for sintering temperatures above 400 °C. The Rhodamine B dye adsorption capacity of BiOCl films decreased with increasing sintering temperature. The results obtained allow us to conclude that BiOCl films are suitable for use in DSSC when the sintering temperature is in the range of 400–500 °C.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly Efficient Photoninitiators Based on 4H-Pyranylidene Derivatives for Two-Photon Laser Printing

  • Royo, Raquel
  • Mainik, Philipp
  • Benitez-Martin, Carlos
  • Andreu, Raquel
  • Blasco, Eva
  • Najera, Francisco
  • Villacampa, Belén
A series of four donor–acceptor–donor derivatives bearing 4H-pyranylidene and 4-methylcyclohexan-1-one units as donor and acceptor groups respectively is designed, synthesized, and photophysically characterized. Both experimental and theoretical studies reveal good two-photon absorption (2PA) properties for these systems. Decoration of the exocyclic position of the 4H-pyranylidene moiety with a thiophene ring results in high 2PA cross-section values (σ2PA) ≈700 nm, and remarkably, in the region between 900 and 1000 nm. Furthermore, all chromophores are evaluated as photoinitiators (PIs) for two-photon-laser printing at 780 nm, showing superior performance compared to the commonly used commercially available PI, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide. Among the studied PIs, the ones equipped with a thiophene unit at the exocyclic position of the 4H-pyranylidene moiety exhibit the highest efficiency, enabling fast printing using low laser powers with even lower concentrations of PI. Overall, this study shows the great potential of this new class of PIs for application in the field of 3D nanoprinting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Novel spiro-core dopant-free hole transporting material for planar inverted Perovskite solar cells

  • Royo, Raquel
  • Sánchez, José G.
  • Li, Wenhui
  • Martinez-Ferrero, Eugenia
  • Palomares, Emilio
  • Andreu, Raquel
  • Franco, Santiago
Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelling TiO2 photoanodes for PEC water splitting: Decoupling the influence of intrinsic material properties and film thickness

  • Ansón-Casaos, A.
  • Ciria, J.C.
  • Martínez Barón, C.
  • Villacampa, B.
  • Benito, A.M.
  • Maser, W.K.
Semiconductor metal oxides are intensively studied in electrodes for photoelectrochemical (PEC) water splitting. On a series of nanoparticulate TiO2 photoanodes, we analyze specific fabrication variables by means of data fitting. First, the experimental outcome is gathered using PEC characterization techniques, mostly cyclic voltammetry and transient photocurrent measurements. Subsequently, we apply models to gain insights into the involved charge trapping and transfer phenomena. We find that capacitance coefficients and the switch-on transient kinetics depend on the TiO2 layer thickness, respectively indicating surface mechanisms and stationary regimes that are mediated by light accessibility. On the contrary, exponential factors of capacitance are independent of thickness, but reflect changes in the density of electron states with different sintering atmospheres. Also, the transfer resistance in the electrolyte side is indirectly influenced by sintering. Through meticulous quantitative analysis of trends, we stablish simple mathematical relationships that connect thickness-dependent parameters. This knowledge delves into fundamental mechanisms governing the TiO2 photoelectrode behaviour, and aims to facilitate further improvements in the efficiency of materials and electrodes for green hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancing the temporal stability of DSSCs with novel vinylpyrimidine anchoring and accepting group

  • Duerto, I.
  • Sarasa, S.
  • Barrios, D.
  • Orduna, J.
  • Villacampa, B.
  • Blesa, M. -J
Three compounds based on aniline, thiophene and vinylpyrimidine as anchoring group have been prepared and studied as light harvesting units for dye-sensitized solar cells (DSSCs). They comprise thiophenyl p-spacer systems with one or two thiophenes (AT-Pyri, ATT-Pyri) and aniline as donor which is functionalized, in one case, with an hydroxyl group (HO-AT-Pyri). The bithiophene based dye (ATT-Pyri) shows higher extinction coefficients and smaller transition energy, as well as broader absorption spectrum. Thus, despite lower dye uptake, devices based on one thiophene and with the hydroxyl group (HO-AT-Pyri) have slightly higher power conversion efficiencies (¿) as compared with the analogous dye without this group (AT-Pyri). However, the best performing device is based on the dye with bithiophene bridge (ATT-Pyri) when a co-adsorbent is added to avoid the aggregation of the dye. The photovoltaic parameters of cells based on these vinylpyrimidine dyes are enhanced over 1000 h, especially for ATT-Pyri devices, which reach a ¿ = 6, 4%. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Waterborne graphene-and nanocellulose-based inks for functional conductive films and 3d structures

  • González-Domínguez J.M.
  • Baigorri A.
  • Álvarez-Sánchez M.Á.
  • Colom E.
  • Villacampa B.
  • Ansón-Casaos A.
  • García-Bordejé E.
  • Benito A.M.
  • Maser W.K.
In the vast field of conductive inks, graphene-based nanomaterials, including chemical derivatives such as graphene oxide as well as carbon nanotubes, offer important advantages as per their excellent physical properties. However, inks filled with carbon nanostructures are usually based on toxic and contaminating organic solvents or surfactants, posing serious health and environmental risks. Water is the most desirable medium for any envisioned application, thus, in this context, nanocellulose, an emerging nanomaterial, enables the dispersion of carbon nanomaterials in aqueous media within a sustainable and environmentally friendly scenario. In this work, we present the development of water-based inks made of a ternary system (graphene oxide, carbon nanotubes and nanocellulose) employing an autoclave method. Upon controlling the experimental variables, low-viscosity inks, high-viscosity pastes or self-standing hydrogels can be obtained in a tailored way. The resulting inks and pastes are further processed by spray-or rod-coating technologies into conductive films, and the hydrogels can be turned into aerogels by freeze-drying. The film properties, with respect to electrical surface resistance, surface morphology and robustness, present favorable opportunities as metal-free conductive layers in liquid-phase processed electronic device structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Earth-abundant non-toxic perovskite nanocrystals for solution processed solar cells

  • Aina S.
  • Villacampa B.
  • Bernechea M.
Semiconductor nanocrystals, used in quantum dot solar cells, are interesting materials for photovoltaics because they can be obtained in solution and can be composed of abundant elements. Moreover, as compared to other photovoltaic materials, nanomaterials show unique features due to their novel size- and shape-dependent properties such as band gap tuning, multiple exciton generation, and modulation of n- or p-type behaviour by doping or by modifying the ligands on the surface of the nanocrystals. Quantum dot solar cells, together with perovskite solar cells, are the latest incorporation to photovoltaic technologies and have already shown impressive progress in efficiencies and great promise as alternatives to commercial solar cells. However, in all cases, the highest efficiencies are obtained with materials that contain lead in their composition. To solve the problem of toxicity, several materials have been proposed as substitutes. In this review, we summarize some of the non-toxic alternatives that have been synthesized as nanocrystals and incorporated in photovoltaic solar cells, specifically: tin (Sn), germanium (Ge), bismuth (Bi), and antimony (Sb)-based materials. Our findings show that this field has been scarcely covered; there are very few reports on non-toxic perovskite nanocrystals incorporated in solar cells and in general, the efficiencies are still modest. However, this area deserves more attention since some nanocrystal-based solar cells already outperform bulk counterparts. For each case, we also discuss factors limiting efficiency, the approaches followed to overcome these limitations, and the possible solutions to improve efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing electron injection in D-A'-π-a dye sensitized solar cells: The role of electrolyte modification

  • Duerto, Isolda
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
This study establishes a theoretical and technical pathway, based on electroanalytical methods, for an optimized design of DSSCs with balanced short-circuit current density (Jsc) and open-circuit voltage parameters (Voc). In this paper, isoindigo (iI) and benzothiadiazole (BTZ) are included as auxiliary acceptors in A-iI-Ph-SIL and A-BTZ-Ph-SIL dyes, respectively. The strength of auxiliary acceptors greatly influences the thermodynamic parameters governing the electron transfer process, as well as the proper distribution of electron density in orbitals. Theoretical calculations reveal that the isoindigo unit, in A-iI-Ph-SIL, exhibits a strong acceptor character that hinders charge transfer from the donor to the primary acceptor. However, in the A-BTZ-Ph-SIL, the moderate acceptor character of the benzothiadiazole unit allows charge movement across the molecule. Voltammetric analyses indicate that, in A-iI-Ph-SIL, the electron injection into the semiconductor is compromised because its excited state energy level is too close to the TiO2 conduction band edge. This fact limits the necessary driving force for efficient injection process. To overcome this, the influence of the iodide/triiodide electrolyte composition on the electrochemical properties is explored. A concentration of 0.1 M tert-butylpyridine yields the optimal efficiency in these devices. This particular concentration strikes the right balance between Jsc and Voc. Notably, this optimized concentration led to a significant 44 % improvement in DSSC efficiency compared to the conventional 0.5 M tert-butylpyridine concentration, achieving a maximum efficiency of 4.79 %. Electrochemical Impedance Spectroscopy indicates that better conversion efficiencies of the devices are linked to a high charge transfer resistance at the TiO₂/solvent interface.