Pasar al contenido principal

INFLUENCIA DE LA TOPOLOGIA DE CADENAS, NANOPARTICULAS Y ENLACES DINAMICOS EN LOS HIDROGELES SEMICRISTALINOS FISICOS, QUIMICOS Y DE DOBLE RED

PID2023-149734NB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data employed in the study: 'Hexadecylamine addition promotes crystallization-driven functionalities in freezing-thawing PVA hydrogels'

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] All measurements were performed under standard conditions, except for those experiments involving temperature ramps., [Methods for processing the data] The data have been organized to improve visualization. Each .dat file in the WAXS dataset corresponds to one degree in the temperature ramp, e.g., 0000 = 10°C, 0001 = 11°C, ..., 0070 = 80°C, This dataset contains raw data from hydrogels obtained through freeze-thawing cycles of aqueous solutions of polyvinyl alcohol (PVA) and its blends with hexadecylamine. The data were collected using a range of experimental techniques including Wide Angle X-ray Scattering (WAXS), Raman spectroscopy, Differential Scanning Calorimetry (DSC), and rheological measurements., This research was financially supported by the projects PID2020-113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/ AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792, -WAXS_PVA_ASPREPARED -WAXS_PVA_PARTIALLYDRIED -WAXS_PVAC16_3_ASPREPARED - WAXS_PVAC16_3_PARTIALLYDRIED - ADHESION - DSC - RAMAN_SPECTRA - RHEOLOGY_STRAINFREQUENCY_ANNEALED - RHEOLOGY_STRAINFREQUENCY_ASPREPARED - RHEOLOGY_TEMPERATURE_ANNEALED - RHEOLOGY_TEMPERATURE_ASPREPARED, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexadecylamine Addition Promotes Crystallization-Driven Functionalities in Freezing–Thaw PVA Hydrogels

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
Poly(vinyl alcohol) (PVA) is widely employed for hydrogel fabrication due to its ability to form stable, physically or chemically cross-linked three-dimensional networks. Among production methods, the freezing-thaw (F-T) technique stands out for its simplicity and effectiveness. This study presents a straightforward methodology for preparing functional PVA hydrogels in aqueous media by blending PVA with a crystallizable hexadecyl alkylamine (C16). Incorporating small amounts of hydrophobic, amphiphilic hexadecylamine into PVA hydrogels via freezing-thaw blending significantly alters crystallization and network structure, enabling gel formation in water without surfactants, solvents, or cross-linkers. C16 enhances phase separation and promotes PVA crystalline domains while remaining amorphous. The resulting PVA/C16 hydrogels exhibit enhanced thermomechanical properties, demonstrating additional functionalities such as self-healing and improved adhesion to polar surfaces. This crystallization-driven gelation via immiscible blending offers a scalable strategy with potential in wearable electronics, soft robotics, and biomedical devices., The authors acknowledge Enrique Blázquez for DSC measurements and Isabel Muñoz for Raman measurements. This research was financially supported by the projects PID2020113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials., The support from King Abdullah University of Science and Technology (KAUST) under grant BAS/1/1342-01-01 is gratefully acknowledged and highly appreciated. This work has received funding from: the Department of Education of the Basque Government through grant no. IT1503-22, the NEFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), the project PID2023-149734NB-C22 funded by MCIU/AEI/10.13039/501100011033, and the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). The authors performed the Synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET and FTIR at BL-01-MIRAS beamline at the ALBA Synchrotron (Proposal Numbers 2020024169 and 2024028137, respectively). We also acknowledge the collaboration of the ALBA Synchrotron radiation facilities staff, particularly Juan Carlos Martínez Guil. V.S. acknowledges Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033, PID2021-127847OB-I00, ELECMI and NANBIOSIS ICTSs., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of chain length on PCL dielectric β-relaxation: Decoupling the roles of chain ends, main chains, entanglements, and crystallinity

  • Sangroniz, Leire
  • Alegría, Ángel
  • Müller, Alejandro J.
The structure of semicrystalline polymers is quite complex due to the presence of interconnected amorphous and crystalline regions. Extended or folded chain crystals, along with entanglements and tie molecules, are formed depending on the chain length. The material’s structure determines its final performance, so understanding the impact of chain length is essential. Broadband dielectric spectroscopy is highly sensitive to the molecular dynamics of polar polymers. In this work, a systematic study of the impact of chain length on PCL’s dielectric relaxation is conducted, decoupling for the first time the role of chain length, chain ends, entanglements, and crystallinity on the β relaxation. PCL samples have been analyzed within a number-average molar mass range of 2–173 kg/mol. The results are modeled by considering the contributions of end groups, the main chain segments, and the degree of crystallinity, which effectively describes the experiments. As the chain length increases, the contribution of the amorphous main chain is altered due to entanglements that may affect the chain dynamics. Our results suggest a strong correlation between changes in the local dynamics of polymer segments and the presence of a rigid amorphous fraction in semicrystalline polymers. Overall, this study contributes to the understanding of the microstructure of semicrystalline polymers, which can be applied to other polymers. The work offers tools for utilizing broadband dielectric spectroscopy to isolate complex chain parameters., A.J.M. acknowledges support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and from the project PID2023-149734NB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the Department of Education of the Basque Government, grant IT1503-22. A.J.M. would also like to thank the program Interreg from the EU for funding the AcroBioPlast POCTEFA EFA74/1 project. L.S. thanks the Gipuzkoa Fellow from the Provincial Council of Gipuzkoa. A.A. acknowledges the grant IT-1566-22 by the Department of Education of the Basque Government., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering piezoelectric polymers and peptides for soft biomedical interfaces

  • Serrano-Bellido, Borja
  • Müller, Alejandro J.
  • Criado-González, Miryam
Organic piezoelectric materials, capable of converting mechanical stress into electrical signals and vice versa, are emerging as versatile platforms for biomedical applications. Their electromechanical behavior originates from ordered dipoles within non-centrosymmetric structures, found in polymers, biodegradable polyesters, polysaccharides, amino acids, ultrashort peptides, and fibrous proteins. The piezoelectric performance is strongly influenced by molecular design, chemical functionalization, crystalline phase, hierarchical organization, and processing techniques of those materials. Combining molecular engineering of amino acids and peptides with hierarchical polymer matrices promises tunable electromechanical properties, scalable fabrication, and biodegradable, bioresorbable platforms. These materials enable innovative biomedical technologies, including self-powered nanogenerators for implantable devices, wearable and implantable biosensors for real-time physiological monitoring, scaffolds that deliver localized electrical cues to promote tissue regeneration, and devices for smart drug-release. Collectively, organic piezoelectric materials offer a sustainable, biocompatible, and adaptable foundation for next-generation bioelectronics and regenerative medicine., B. S–B thanks the predoctoral Grant PREP2023-001743 funded by MICIU/AEI/10.13039/501100011033 and FSE+. M. C-G thanks Grant RYC2022-036380-I funded by MICIU/AEI/10.13039/501100011033 and FSE+, and Grant CNS2024-154833 funded by MICIU/AEI/ 10.13039/501100011033. The authors acknowledge funding by the projects PID2023-149734NB-C21 and C22 funded by MCIU/AEI/ 10.13039/501100011033 and by ERDF, EU. This work has received funding from the María de Maeztu Excellence Unit CEX2023-001303 funded by MCIN/AI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How the lack of chain ends affects the melt memory of poly(ethylene oxide): cyclic versus linear chains

  • Sangroniz, Leire
  • Barroso-Bujans, Fabienne
  • Allgaier, Jürgen
  • Müller, Alejandro J.
When a semicrystalline polymer is heated to temperatures just above its melting point, some self-nuclei can survive. Depending on the temperature, these self-nuclei may be composed of self-seeds (i.e., crystal fragments that survived the melting process) or, if all crystals are melted, by regions in the melt that retain the memory of the chain conformations when they were crystalline. This last case is known as melt memory. The parameters influencing melt memory have been studied in recent years, including the role of intermolecular interactions, molar mass, and the presence of comonomers or branches. However, the influence of chain topology has only been addressed in a few studies. In this work, we investigate how chain topology affects melt memory by analyzing cyclic PEO samples spanning a wide molar mass range from 2 to 84 kg/mol and comparing these results with linear PEO samples of similar molar masses. Cyclic PEO chains lack chain ends and exhibit a lower melting temperature than their linear counterparts under non-isothermal conditions. Similarly, the crystalline lamellar thickness is smaller for cyclic chains than for linear chains. Using the self-nucleation thermal procedure, the width of the melt memory temperature range (also called DIIa) was examined. The results show that melt memory is triggered at 6 kg/mol in cyclic PEOs. DIIa then increases with molar mass until reaching a plateau at approximately 37 kg/mol. The onset of melt memory occurs at a higher critical molar mass in cyclic PEOs (6 kg/mol) than in linear PEOs (1 kg/mol) because unentangled cyclic chains adopt a more compact coil conformation and diffuse faster, enabling them to reach an isotropic melt more easily. Since cyclic chains can only entangle at significantly higher molar masses than linear chains, the typical increase in melt memory with increasing Mn beyond Me (i.e., the entanglement molar mass) also manifests at higher molar masses in cyclic chains. When chain-end effects are negligible, both cyclic and linear PEO chains display the same extent of melt memory beyond 37 kg/mol., This work has received funding from: (a) the EFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), (b) the project PID2023-149734NB-C22, financed by MCIU/AEI/10.13039/501100011033 and FEDER EU, (c) the María de Maeztu Excellence Unit CEX2023-001303-M financed by MCIN/AEI/10.13039/501100011033 and (d) the project IT1820-26 financed by the Basque Government., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials.