Pasar al contenido principal

DESDE NUEVOS GELES POLIMERICOS INDUCIDOS POR CRISTALIZACION HASTA EL DESARROLLO DE SUS POTENCIALES APLICACIONES EN IMPRESION 3D

PID2020-113045GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimisation of stimuli-responsive films based on dynamic alpha, beta-unsaturated imines from chitosan and trans-2-hexenal to enhance the antimicrobial acid-response

  • Esteve-Redondo, Patricia
  • Heras-Mozos, Raquel
  • Hernández, Rebeca
  • Hernández-Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Trans-2-hexenal (HX) is a potent antimicrobial which can be reversibly stabilised in chitosan (CS) films forming alpha, beta-unsaturated imines. The hydrolysis of the imines promoted by acid environments triggers the release of HX to the media exerting its antimicrobial activity. It is known that besides imines, the electrophilic ß-alkene carbon of HX can form Michael adducts with primary amino groups of chitosan. However, the formation of nucleophile-C bonds is undesired since these bonds are barely hydrolysed and limit the release of HX and by hence, the effectivity of the film. Thus, the aim of this work has been to optimise the formation of trans-2-hexenal-imine-chitosan films employing response surface methodology in order to favour the formation of conjugated imines avoiding Michael adducts. The optimisation of the reaction parameters indicated that synthesis temperature of 10 °C and without the use of an acid catalyst favours the formation of conjugated imines. Spectroscopic techniques, elemental analysis and swelling behaviour in various media were used to characterise the optimised films. The release kinetics of HX and the antimicrobial activity of the films were also studied. The present work provided relevant information to increase the antimicrobial efficacy of trans-2-hexenal-imine-chitosan films for the development of active food packaging., The authors acknowledge Levi Lopez Vilanova and Jorge Mercado Rico for their assistance with solid state 13C NMR measurements. The authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (MCIU) through the projects PID2021-123077OB-I00 and PID2020-113045 GB-C22 (MCIU/AEI/FEDER, UE) . P. H -M., R.H., and R.G., are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast +) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094) . The authors acknowledge the award of the Spanish government MCIU/AEI to the IATA-CSIC as Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/MCIU/AEI/10.13039/501100011033) .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the Rheological Properties of Self-Assembled Tripeptide/Alginate/Cellulose Hydrogels for 3D Printing

  • Hernández-Sosa, Alejandro
  • Ramírez-Jiménez, Rosa Ana
  • Rojo, Luis
  • Boulmedais, F.
  • Aguilar, María Rosa
  • Criado-González, Miryam
  • Hernández, Rebeca
3D printing is an emerging and powerful technique to create shape-defined three-dimensional structures for tissue engineering applications. Herein, different alginate–cellulose formulations were optimized to be used as printable inks. Alginate (Alg) was chosen as the main component of the scaffold due to its tunable mechanical properties, rapid gelation, and non-toxicity, whereas microcrystalline cellulose (MCC) was added to the hydrogel to modulate its mechanical properties for printing. Additionally, Fmoc-FFY (Fmoc: 9-fluorenylmethoxycarbonyl; F: phenylalanine; Y: tyrosine), a selfassembled peptide that promotes cell adhesion was incorporated into the ink without modifying its rheological properties and shear-thinning behavior. Then, 3D-printed scaffolds made of Alg, 40% of MCC inks and Fmoc-FFY peptide were characterized by scanning electron microscopy and infrared spectroscopy, confirming the morphological microstructure of the hydrogel scaffolds with edged particles of MCC homogeneously distributed within the alginate matrix and the self-assembly of the peptide in a β-sheet conformation. Finally, the cytocompatibility of the scaffolds was tested in contact with the MG63 osteosarcoma cells, confirming the absence of cytotoxic components that may compromise their viability. Interestingly, MG63 cell growth was retarded in the scaffolds containing the peptide, but cells were more likely to promote adhesive interactions with the material rather than with the other cells, indicating the benefits of the peptide in promoting biological functionality to alginate-based biomaterials., Financial support from the Spanish Research Council (CSIC) and French Research Council (CNRS) for the project PICS (International Emerging Actions) 2018 HYDROPRINT is gratefully acknowledged. The authors also acknowledge funding from CIBER-BBN and MICINN (PID2020- 113045GB-C22 and PID2020-114086RB-I00). R.H., L.R., and M.R.A. are members of the SUSPLAST+ platform of the CSIC and L.R. and M.R.A. are members of the HUB Nanomedicine CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biotintas de alginato para impresión 3D: efecto de la estructura en sus propiedades reológicas

  • Mercado, Jorge
  • Esteban-Arranz, Adrián
  • Hernández-Sosa, Alejandro
  • López-Rubio, Amparo
  • Martínez Abad, Antonio
  • Hernández, Rebeca
  • Bojorges, Hylenne
  • Fabra, María José
El alginato es un polímero de origen natural que gelifica rápidamente a temperatura ambiente en presencia de cationes divalentes, ampliamente utilizado en impresión 3D por extrusión. En este trabajo se emplearon tres alginatos con diferentes características estructurales, uno comercial y dos extraídos en el laboratorio para la preparación de biotintas de alginato. Para la preparación de las biotintas, se entrecruzaron los alginatos con diferentes concentraciones de cloruro cálcico. Los resultados obtenidos mediante pruebas de vial invertido y medidas de flujo mostraron que el alginato con relación menor M/G dio lugar a biotintas con mayores valores de viscosidad a menores concentraciones de cloruro cálcico. Este trabajo pretende demostrar la gran influencia que la estructura del alginato tiene sobre la preparación de biotintas que puedan ser utilizadas para la producción de andamios por impresión 3D., Alginate is a natural polymer with a fast gelation process at room temperature in the presence of divalent cations, which is widely used in 3D printing by extrusion. In this work, three different alginates with different structural characteristics, one commercial and two extracted in the lab from algae were used to prepare alginate bioinks. These bioinks were crosslinked with different concentrations of CaCl2. Results from the inverted vial and flow measurements allowed to conclude that alginate with the lowest M/G ratio gave rise to bioinks with higher viscosity at lower concentrations of CaCl2. This work demonstrates the influence that the alginate structure possesses for the generation of bioinks that will be used to produce scaffolds by 3D printing technique., Los autores agradecen la financiación economica del MICINN (PID2020-113045GB-C22 y RTI-2018-094268-B-C22). Adrián Esteban-Arranz agradece el contrato financiado por la Plataforma Temática Interdisciplinar del CSIC, SusPlast: Plataforma Interdisciplinar de Plásticos Sostenibles para una Economía Circular. Hylenne Bojorges agradece el contrato Santiago Grisolía de la Generalitat Valenciana (GRISOLIAP/2019/007), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable enzymatic biodegradation of poly(butylene succinate): biobased coatings and self-degradable films

  • Peñas, Mario I.
  • Criado-González, Miryam
  • Martínez de Ilarduya, Antxon
  • Flores, Araceli
  • Raquez, Jean-Marie
  • Mincheva, Rosica
  • Müller, Alejandro J.
  • Hernández, Rebeca
Biodegradation of polyesters driven by enzymes is considered as one of the most effective way of degradation of these materials, as a way to control plastics accumulation in the environment. In this study, we present two different strategies to tune the enzymatic degradation of PBS films triggered by a lipase from Pseudomonas cepacia. Firstly, the kinetics of enzymatic degradation of PBS films was regulated by applying multilayer coats of polysaccharide alginate and chitosan (Alg/Chi) films. Secondly, self-degradable PBS films were prepared by embedding lipase-filled alginate particles. For comparison purposes, a detailed enzymatic degradation study of neat PBS films exposed to a lipase from P. cepacia in solution was made to determine the main experimental parameters influencing their degradation in solution. The results showed that an increase in enzyme concentration increased the degradation extent and rate of neat PBS films. At a fixed enzyme concentration, stirring of the solution containing the enzyme and the PBS also increased the biodegradation rate. In the case of the PBS films coated with a different number of Alg/Chi layers by spray-assisted LbL and subjected to enzymatic degradation experiments in solution, the extent of degradation was found to be dependent on the number of protective coating layers. Therefore, the Alg/Chi biobased coating constitutes an effective barrier to the diffusion of the lipase, thus proving its effectiveness in modulating the enzymatic activity as a function of coating thickness. In the case of self-degradable PBS containing lipase-embedded alginate beads (employed to protect the enzyme during high-temperature processing), only limited biodegradation was observed as the amount of encapsulated enzyme employed was too small. Nonetheless, these results are promising, as the enzymatic activity –indicative of the degradation capacity of the enzyme– determined for all these samples was about 2 orders of magnitude lower than that of previous assays., This research was funded by the projects MAT2017-83014-C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement No. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+). J.M.R. is a FRS-FNRS Senior Research Associate. Authors would also like to thank Dr. Ana Beloqui for helpful discussions on enzymatic activity., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of chain topology on gel formation and direct ink printing of model linear and star block copolymers with poly(ethylene oxide) and poly(ε-caprolactone) semi-crystalline blocks

  • Centeno, E.
  • Peñas, Mario I.
  • Zhan, P.
  • Mercado-Rico, J.
  • Matxinandiarena, E.
  • Zubitur, M.
  • Mugica, A.
  • Hadjichristidis, N.
  • Müller, A. J.
  • Hernández, Rebeca
In this work, a set of well-defined linear triblock copolymers and star block copolymers (3 and 4-arms) with semi-crystalline blocks consisting of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL), synthesized by combining ring-opening polymerization and organic catalyst switch strategy, were studied as thermosensitive gel-forming biomaterials for applications in 3D extrusion printing. The hydrogels derived from linear copolymers underwent a temperature-dependent sol–gel–sol transition, behaving as a flowing sol at room temperature and transforming into a non-flowing gel upon heating. On the other hand, the hydrogels derived from 4-arm star block copolymers experienced a gel-sol transition and did not flow at room temperature. This behavior allowed them to be used as 3D printing inks at room temperature. 3D printing results revealed that the semi-crystalline hydrogels of the 4-arm star block copolymers could not only be extruded and printed with high shape fidelity, but they also exhibited a favorable dissolution profile for their use as sacrificial biomaterial inks. Additionally, we thoroughly investigated the crystalline organization of the PCL and the PEO blocks within the hydrogels through comparison with the results obtained in bulk. The results demonstrated evident structural ordering in the hydrogels associated with the crystallization of the PCL blocks. Unexpectedly, DSC results combined with SAXS experiments revealed the presence of PEO block crystals within the 30 % w/v hydrogels from 4-arm star block copolymers, in addition to the PCL block crystals. Hence, remarkable double crystalline hydrogels have been obtained for the first time., This research was financially supported by the projects PID2020- 113045GB-C21 and PID2020-113045GB-C22 funded by MCIN/ AEI /10.13039/501100011033 and by the Basque Government through grant IT1503-22. M.I.P. acknowledges funding through an FPI contract (PRE2018-086104) to develop a PhD thesis. The support of the ALBA (2022086944 and 2022086957 proposals) synchrotron facility is gratefully acknowledged. R.H. is a member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI-SusPlast+) and the PTI CSIC FAB3D. The authors would also like to thank Alejandro Hernandez-Sosa for assistance regarding 3D printing experiments. P.Z., V.L., and N.H. gratefully acknowledge the support of the King Abdullah University of Science and Technology (KAUST).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release

  • Hernández-Sosa, Alejandro
  • Mercado-Rico, Jorge
  • Usala, Elena
  • Cataldi, G.
  • Esteban-Arranz, Adrián
  • Penott-Chang, E.
  • Müller, Alejandro J.
  • González, Zoilo
  • Espinosa, Eduardo
  • Hernández, Rebeca
In this work, composite hydrogels of nanofibrilated cellulose (CNF) and alginate were prepared through direct addition of alginate in powder to a CNF hydrogel. Alginate was hydrophobically modified with C8 alkyl chains (HMAlg), and the effect of chemical modification on the rheological properties and printability of the resulting composite gels was evaluated. The rheological characterization of the composite hydrogels indicated that the addition of alginate, non-modified and HMAlg, did not influence the zero-shear rate viscosity or the mechanical properties of the pristine CNF hydrogels. Printability tests showed that the incorporation of alginate, especially HMAlg, hindered the manufacture of well-defined 3D polymeric structures through 3D extrusion printing. This effect was much more pronounced with the incorporation of bovine serum albumin (BSA) into the gels, which was ascribed to the presence of interactions between the polymer matrix and the BSA. Finally, experiments of BSA release were run with 3D-printed samples, showing that controlled release could be achieved from CNFs gels., This research was funded by the projects PID2020-113045 GB-C21, PID2020-113365RA-I00 and PID2020-113045 GB-C22 funded by MCINN/AEI/10.13039/501100011033. R.H. and A. E-A. are members of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTISusPlast+).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

  • Peñas, Mario I.
  • Beloqui, A.
  • Martínez de Ilarduya, A.
  • Suttiruengwong, S.
  • Hernández, Rebeca
  • Müller, A. J.
Over the past decade, the preparation of novel materials by enzyme-embedding into biopolyesters has been proposed as a straightforward method to produce self-degrading polymers. This paper reports the preparation and enzymatic degradation of extruded self-degradable films of three different biopolyesters: poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and poly(butylene succinate) (PBS), as well as three binary/ternary blends. Candida antarctica lipase B (CalB) has been employed for the enzyme-embedding procedure, and to the best of our knowledge, the use of this approach in biopolyester blends has not been reported before. The three homopolymers exhibited differentiated degradation and suggested a preferential attack of CalB on PBS films over PBAT and PLA. Moreover, the self-degradable films obtained from the blends showed slow degradation, probably due to the higher content in PLA and PBAT. These observations pave the way for exploring enzymes capable of degrading all blend components or an enzymatic mixture for blend degradation., This research was funded by the projects MAT2017-83014- C2-1-P, MAT2017-83014-C2-2-P, PID2020-113045GB-C21, and PID2020-113045GB-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by the Basque Government through grant IT1503-22. We would also like to acknowledge the financial support from the BIODEST project; this project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant agreement no. 778092. M.I.P. is supported with an FPI contract (PRE2018-086104) to develop a PhD thesis. A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program - MCIN/AEI/10.13039/501100011033 and FSE “invierte en tu futuro”). R.H. is member of the CSIC Interdisciplinary Thematic Platform (PTI+) Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+ (PTI- SusPlast+). We also acknowledge the Department of Materials Science and Engineering, Silpakorn University for sample fabrications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Salt-induced Fmoc-tripeptide supramolecular hydrogels: a combined experimental and computational study of the self-assembly

  • Criado-González, Miryam
  • Peñas, Mario I.
  • Barbault, F.
  • Müller, Alejandro J.
  • Boulmedais, F.
  • Hernández, Rebeca
Delving into the mechanism behind the molecular interactions at the atomic level of short-sequence peptides plays a key role in the development of nanomaterials with specific structure-property-function relationships from a bottom-up perspective. Due to their poor water solubility, the self-assembly of Fmoc-bearing peptides is usually induced by dissolution in an organic solvent, followed by a dilution step in water, pH changes, and/or a heating-cooling process. Herein, we report a straightforward methodology for the gelation of Fmoc-FFpY (F: phenylalanine; Y: tyrosine; and p: PO), a negatively charged tripeptide, in NaCl solution. The electrostatic interactions between Fmoc-FFpY and Na ions give rise to different nanofibrillar hydrogels with rheological properties and nanofiber sizes modulated by the NaCl concentration in pure aqueous media. Initiated by the electrostatic interactions between the peptide phosphate groups and the Na ions, the peptide self-assembly is stabilized thanks to hydrogen bonds between the peptide backbones and the π-π stacking of aromatic Fmoc and phenyl units. The hydrogels showed self-healing and thermo-responsive properties for potential biomedical applications. Molecular dynamics simulations from systems devoid of prior training not only confirm the aggregation of peptides at a critical salt concentration and the different interactions involved, but also corroborate the secondary structure of the hydrogels at the microsecond timescale. It is worth highlighting the remarkable achievement of reproducing the morphological behavior of the hydrogels using atomistic simulations. To our knowledge, this study is the first to report such a correspondence., Financial support from the Spanish Research Council (CSIC) and the French Research Council (CNRS) for the International Emerging Actions 2018 HYDROPRINT project is gratefully acknowledged. The authors also acknowledge the funding from the projects MAT2017-83014-C2-2-P and PID2020113045GB-C22 by MCIN/AEI/10.13039/501100011033 and the ALBA Synchrotron (Proposal number 2021095380). R. H. is a member of the SUSPLAST+ platform of CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geles poliméricos. 1. Algunos conceptos básicos y reología de geles

  • Echeverría, Coro
  • Mijangos, Carmen
Los geles poliméricos están constituidos por polímero y disolvente y poseen tanto las propiedades cohesivas de los sólidos como las propiedades de transporte de los líquidos. Esta dualidad permite modular la actividad de los geles de forma controlada y elucidar aspectos estructurales de los mismos. Los geles abarcan un gran espectro de diferentes polímeros (sintéticos y de origen natural), disolventes (el agua es el más común: hidrogeles), tamaños (macro-, micro- y nanogeles) y propiedades específicas, muy atractivas de cara a sus aplicaciones. El estudio de las propiedades viscoelásticas y la aplicación de distintos modelos permite conocer su organización estructural. Los geles han demostrado su utilidad como sistemas eficaces de almacenaje/incorporación de disolventes y otros componentes, liberación de fármacos y en hipertermia magnética, entre otros. Este trabajo resume muy brevemente algunos conceptos y se centra en las propiedades reológicas donde se han recogido los modelos y teorías más relevantes aplicadas tanto a geles como a microgeles poliméricos, Polymer gels, made up of polymer and solvent, have both the cohesive properties of solids and the transport properties of liquids. This duality allows modulating the activity of the gels in a controlled way and elucidating their structural aspects. Gels cover a wide spectrum of different polymers (synthetic and natural), solvents (water is the most common: hydrogels), sizes (macro-, micro- and nanogels) and specific properties, very attractive for their applications. The study of the viscoelastic properties and the application of different models, allows knowing its structural organization. Gels have demonstrated their importance as efficient storage/incorporation systems for solvents and other components, drug release and magnetic hyperthermia, among others. This work briefly summarizes some concepts and focuses on the rheological properties, where the most relevant models and theories applied to both gels and polymeric microgels have been collected, Las autoras agradecen al Ministerio de Ciencia e Innovación la concesión de los proyectos PID2021-123553OA-I00 y PID2020-113045GB-C22 y al CSIC el proyecto de incorporación 202260I149, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimisation of stimuli-responsive films based on dynamic α,β-unsaturated imines from chitosan and trans-2-hexenal to enhance the antimicrobial acid-response

  • Esteve Redondo, Patricia
  • Heras-Mozos, Raquel
  • Hernández, Rebeca
  • Gavara, Rafael
  • Hernández-Muñoz, Pilar
Trans-2-hexenal (HX) is a potent antimicrobial which can be reversibly stabilised in chitosan (CS) films forming α,β-unsaturated imines. The hydrolysis of the imines promoted by acid environments triggers the release of HX to the media exerting its antimicrobial activity. It is known that besides imines, the electrophilic β-alkene carbon of HX can form Michael adducts with primary amino groups of chitosan. However, the formation of nucleophile-C bonds is undesired since these bonds are barely hydrolysed and limit the release of HX and by hence, the effectivity of the film. Thus, the aim of this work has been to optimise the formation of trans-2-hexenal-imine-chitosan films employing response surface methodology in order to favour the formation of conjugated imines avoiding Michael adducts. The optimisation of the reaction parameters indicated that synthesis temperature of 10 °C and without the use of an acid catalyst favours the formation of conjugated imines. Spectroscopic techniques, elemental analysis and swelling behaviour in various media were used to characterise the optimised films. The release kinetics of HX and the antimicrobial activity of the films were also studied. The present work provided relevant information to increase the antimicrobial efficacy of trans-2-hexenal-imine-chitosan films for the development of active food packaging., The authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (MCIU) through the projects PID2021-123077OB-I00 and PID2020-113045 GB-C22 (MCIU/AEI/FEDER, UE). P. H-M., R.H., and R.G., are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast+) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094). The authors acknowledge the award of the Spanish government MCIU/AEI to the IATA-CSIC as Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/MCIU/AEI/10.13039/501100011033, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Injectable hyaluronic acid hydrogels via Michael addition as dermal fillers for skin regeneration applications

  • Pérez, Luis Andrés
  • Alonso, José María
  • Pérez-González, Raúl
  • Velasco, Diego
  • Suárez-Cabrera, Leticia
  • de Aranda-Izuzquiza, Gonzalo
  • Sáez-Martínez, Virginia
  • Hernández, Rebeca
This study presents the development of injectable hydrogels based on hyaluronic acid for dermal filler applications, synthesized via Michael-type addition reactions between thiolated hyaluronic acid and polyethylene glycol derivatives. By varying thiol substitution, crosslinking kinetics and hydrogel properties were optimized. Biphasic gel formulations comprising crosslinked hyaluronic acid microparticles in a non-reactive fluid phase matrix enhances injectability and versatility. Key properties, including enzymatic degradation, injectability, and rheology, were evaluated, alongside a three-dimensional culture model to simulate dermal remodelling. Selected gel formulations promoted balanced collagen synthesis and degradation, essential for skin regeneration, while showing a controlled inflammatory response, supporting tissue repair and reducing adverse effects. These f indings position these hydrogels as promising candidates for safe and effective dermal filler, supporting tissue remodelling and inflammation management., The authors would like to express their appreciation to E. García and M. Benito (CENQUIOR-CSIC) for the support with NMR spectroscopy. This research was funded by the Spanish Ministry of Science and Innovation through the call ‘Doctorados Industriales 2019’ (DIN2019- 010868) and the project PID2020-113045 GB-C22 funded by MCINN/ AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data regarding rheological characterization, pore size determination and printability of the materials employed in the study: “Genipin-Crosslinked Pectin Hydrogels: A Dual Strategy for Enhanced 3D Printability and Stability”

  • Mercado-Rico, Jorge
  • Pérez-Pérez, Luis
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] Rheological data. The rheological properties of all the materials were determined using a rotational rheometer (AR-G2, TA Instruments, USA) equipped with a 20 mm cross-hatched stainless steel Peltier plate geometry. Oscillatory frequency sweep tests were conducted on pectin-genipin hydrogels swollen at equilibrium over a frequency range of 0.01–10 Hz, at a temperature of 25 ºC and at a constant strain of 1%, located within the linear viscoelastic region (LVR). An oscillatory amplitude sweep (1 Hz; γ = 0.01%–500%) was performed to determine the critical strain, defined as the point at which a 5% decrease in the storage modulus (G′) is observed. Subsequently, frequency sweep tests (1% strain, 0.01–100 Hz) were carried out to measure the storage modulus (G′) and loss modulus (G″). Finally, hydrogel recovery test varying the strain from 1% to 200% at a constant frequency of 1 Hz, applying 2 cycles at high strain. Printability tests. Scaffolds were fabricated via 3D printing using a Creality Ender 3 Pro filament printer, which was adapted to enable the extrusion of polymeric hydrogels. The uniformity factor (U) was used to evaluate how uniform the filament was compared to a perfectly straight filament. Digimizer software was used to manually measure the outer edge on both sides of the filament. This length was then divided by the length of the reference line to calculate the uniformity factor (equation 2), which indicates whether the filament is uniform (U = 1) or non-uniform (U > 1). U"\=" (length"\ "of"\ "printed"\ "filament"\ ")/(length"\ "of"\ "theorical"\ "straight"\ "filament) (Equation 1) For the determination of the printability index, Pr, a single layer cylindrical scaffold was printed with an internal design configured to form 12 squares with a side length of 3 mm each. The area of each internal square was quantified using Digimizer software, and these values were used to calculate the average printability index (Pr) according to equation 3. Based on this index, three gelation states are identified: insufficient gelation (Pr < 1), adequate gelation (Pr = 1), and excessive gelation (Pr > 1). Pr"\=" π/4 x 1/C "\=" L^2/16A "\ "(Equation"\ " 2) Pore size. Pore size was quantified using ImageJ. Micrographs were calibrated with the scale bar, and image preprocessing (contrast enhancement and threshold adjustment) was applied to delineate pore boundaries. Approximately 45 pores were analyzed per sample, and the equivalent circular diameter was calculated from the pore area. Results were reported as mean ± standard deviation (SD) to describe pore size distribution., [Methods for processing the data] The files contain raw data obtained through rheological measurements, pore size determination and printability tests are organized in EXCEL files to improve visualization., This dataset contains raw data from obtained through oscillatory rheological measurements, pore size determination and printability tests organized in EXCEL files and employed in the study “Genipin-Crosslinked Pectin Hydrogels: A Dual Strategy for Enhanced 3D Printability and Stability”, This research has been funded by the projects PID2020-113045GB-C22 and PID2023-149734NB-C21 by MCIN/AEI/10.13039/501100011033, the “Industrial Doctorate” call (DIN2019-010868), and the DIGIMATER-CM project (TEC-2024/TEC-102) funded by the Community of Madrid, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexadecylamine Addition Promotes Crystallization-Driven Functionalities in Freezing–Thaw PVA Hydrogels

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
Poly(vinyl alcohol) (PVA) is widely employed for hydrogel fabrication due to its ability to form stable, physically or chemically cross-linked three-dimensional networks. Among production methods, the freezing-thaw (F-T) technique stands out for its simplicity and effectiveness. This study presents a straightforward methodology for preparing functional PVA hydrogels in aqueous media by blending PVA with a crystallizable hexadecyl alkylamine (C16). Incorporating small amounts of hydrophobic, amphiphilic hexadecylamine into PVA hydrogels via freezing-thaw blending significantly alters crystallization and network structure, enabling gel formation in water without surfactants, solvents, or cross-linkers. C16 enhances phase separation and promotes PVA crystalline domains while remaining amorphous. The resulting PVA/C16 hydrogels exhibit enhanced thermomechanical properties, demonstrating additional functionalities such as self-healing and improved adhesion to polar surfaces. This crystallization-driven gelation via immiscible blending offers a scalable strategy with potential in wearable electronics, soft robotics, and biomedical devices., The authors acknowledge Enrique Blázquez for DSC measurements and Isabel Muñoz for Raman measurements. This research was financially supported by the projects PID2020113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Genipin-crosslinked pectin hydrogels: A dual strategy for enhanced 3D printability and stability

  • Mercado-Rico, Jorge
  • Pérez, Luis Andrés
  • Alonso, José María
  • Pérez-González, Raúl
  • Sáez-Martínez, Virginia
  • Mascaraque-León, Aroa
  • Haranczyk, Maciej
  • Echeverry-Rendón, Mónica
  • Hernández, Rebeca
The development of polysaccharide-based biomaterial inks with tailored physicochemical properties and dynamic responsiveness currently attracts a lot of scientific interest. Pectin, a natural and biocompatible polysaccharide, shows great promise for a wide range of biomedical applications, but its limited mechanical strength and printability constrain its application in 3D extrusion bioprinting. This study introduces a strategy to overcome these drawbacks via amine modification and genipin crosslinking, producing hydrogels with improved mechanical stability under physiological conditions. Pectin hydrogels formed at various amine:genipin ratios (1:0.6 to 1:3) exhibited elastic moduli values in the range of 3-5 KPa under physiological conditions, with crosslinking efficiency reaching a plateau. Biomaterial inks comprising crosslinked pectin particles were dispersed in a reactive aqueous pectin solution, thus enabling precise 3D extrusion of scaffolds with up to 7 layers, maintaining structural integrity post-lyophilization. The 3D printed pectin hydrogels showed enhanced porosity and swelling kinetics, particularly in response to pH changes, while maintaining high hydrolytic stability and non-cytotoxicity. This approach provides a promising platform for developing dynamic, pectin-based bioinks in bio applications requiring of extrusion based additive manufacturing techniques., This research has been funded by the projects PID2020-113045GB C22 and PID2023-149734NB-C21 by MCIN/AEI/10.13039/ 501100011033, the “Industrial Doctorate” call (DIN2019-010868), and the DIGIMATER-CM project (TEC-2024/TEC-102) funded by the Community of Madrid, Peer reviewed