Pasar al contenido principal

FABRICACION ADITIVA DE HIDROGELES DINAMICOS SIMPLES Y DOBLES A PARTIR DE POLIMEROS NATURALES Y NANOCOMPUESTOS

PID2023-149734NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data employed in the study: 'Hexadecylamine addition promotes crystallization-driven functionalities in freezing-thawing PVA hydrogels'

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] All measurements were performed under standard conditions, except for those experiments involving temperature ramps., [Methods for processing the data] The data have been organized to improve visualization. Each .dat file in the WAXS dataset corresponds to one degree in the temperature ramp, e.g., 0000 = 10°C, 0001 = 11°C, ..., 0070 = 80°C, This dataset contains raw data from hydrogels obtained through freeze-thawing cycles of aqueous solutions of polyvinyl alcohol (PVA) and its blends with hexadecylamine. The data were collected using a range of experimental techniques including Wide Angle X-ray Scattering (WAXS), Raman spectroscopy, Differential Scanning Calorimetry (DSC), and rheological measurements., This research was financially supported by the projects PID2020-113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/ AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792, -WAXS_PVA_ASPREPARED -WAXS_PVA_PARTIALLYDRIED -WAXS_PVAC16_3_ASPREPARED - WAXS_PVAC16_3_PARTIALLYDRIED - ADHESION - DSC - RAMAN_SPECTRA - RHEOLOGY_STRAINFREQUENCY_ANNEALED - RHEOLOGY_STRAINFREQUENCY_ASPREPARED - RHEOLOGY_TEMPERATURE_ANNEALED - RHEOLOGY_TEMPERATURE_ASPREPARED, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From rheological concepts to additive manufacturing assessment of hydrogel-based materials for advanced bioprinting applications

  • Calafel, M. Itxaso
  • Criado-González, Miryam
  • Aguirresarobe, Robert
  • Fernández, Mercedes
  • Mijangos, Carmen
Hydrogels have emerged as highly attractive polymer-based materials owing to their unique solid-liquid rheological duality, which allows their use in 3D extrusion and inkjet printing, particularly in the field of biomedical applications. The dynamic moduli (storage modulus, G′, and loss modulus, G′′), relaxation modulus, shear-thinning behaviour, thixotropy, viscoelasticity, and yield stress are the most commonly employed rheological concepts for hydrogel applications in 3D/4D additive manufacturing. Extrusion, inkjet printing, and stereolithography are the most studied manufacturing technologies for hydrogel bioprinting applications. Moreover, hydrogels exhibit a combination of cohesive properties of solids and the transport characteristics of liquids. Their rheological behaviour, however, varies depending on whether they are chemically cross-linked, showing a pure solid elastic behaviour, or physically crosslinked, showing viscoelastic behaviour. While rheology reveals much information about the flow behaviour of liquids or deformation behaviour of solids, it is not as obvious as to anticipate the printability of hydrogels. Therefore, a deep understanding of rheological principles and their correlation with printability is essential. This review begins summarizing various polymer hydrogels. Subsequently, the definition and description of the most employed concepts, namely relaxation modulus, storage, and loss moduli, and many others, are necessary to understand and associate the feasibility of hydrogels for a particular bioprinting process. This review mainly addresses: (i) rheological determination of the processing window for direct ink writing (DIW), (ii) rheological restrictions for printing beyond direct ink writing (DIW), and (iii) vat photopolymerization bioprinting and the biological implications of bioprinting. Finally, all the above concepts are illustrated with a few examples of biomedical applications of 3D/4D printed hydrogels., Authors acknowledge the Spanish Ministry of Science, Innovation and Universities for financial support in the form of grant MAT 2020-83014-C2-2-P. The authors also thank the project PID2023149734NB-C21 funded by MICIU/AEI/10.13039/501100011033 and by FEDER,UE.R.A.andI.C.acknowledgestheDepartmentof Health of the Basque Government (project 2024333015, MIRNA) for financial support. M. C.-G. thanks ‘‘Grant RYC2022-036380-I founded by MICIU/AEI/10.13039/501100011033 and FSE+’’ and the Emakiker program of POLYMAT (UPV/EHU, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data regarding rheological characterization, pore size determination and printability of the materials employed in the study: “Genipin-Crosslinked Pectin Hydrogels: A Dual Strategy for Enhanced 3D Printability and Stability”

  • Mercado-Rico, Jorge
  • Pérez-Pérez, Luis
  • Hernández, Rebeca
[Description of methods used for collection/generation of data] Rheological data. The rheological properties of all the materials were determined using a rotational rheometer (AR-G2, TA Instruments, USA) equipped with a 20 mm cross-hatched stainless steel Peltier plate geometry. Oscillatory frequency sweep tests were conducted on pectin-genipin hydrogels swollen at equilibrium over a frequency range of 0.01–10 Hz, at a temperature of 25 ºC and at a constant strain of 1%, located within the linear viscoelastic region (LVR). An oscillatory amplitude sweep (1 Hz; γ = 0.01%–500%) was performed to determine the critical strain, defined as the point at which a 5% decrease in the storage modulus (G′) is observed. Subsequently, frequency sweep tests (1% strain, 0.01–100 Hz) were carried out to measure the storage modulus (G′) and loss modulus (G″). Finally, hydrogel recovery test varying the strain from 1% to 200% at a constant frequency of 1 Hz, applying 2 cycles at high strain. Printability tests. Scaffolds were fabricated via 3D printing using a Creality Ender 3 Pro filament printer, which was adapted to enable the extrusion of polymeric hydrogels. The uniformity factor (U) was used to evaluate how uniform the filament was compared to a perfectly straight filament. Digimizer software was used to manually measure the outer edge on both sides of the filament. This length was then divided by the length of the reference line to calculate the uniformity factor (equation 2), which indicates whether the filament is uniform (U = 1) or non-uniform (U > 1). U"\=" (length"\ "of"\ "printed"\ "filament"\ ")/(length"\ "of"\ "theorical"\ "straight"\ "filament) (Equation 1) For the determination of the printability index, Pr, a single layer cylindrical scaffold was printed with an internal design configured to form 12 squares with a side length of 3 mm each. The area of each internal square was quantified using Digimizer software, and these values were used to calculate the average printability index (Pr) according to equation 3. Based on this index, three gelation states are identified: insufficient gelation (Pr < 1), adequate gelation (Pr = 1), and excessive gelation (Pr > 1). Pr"\=" π/4 x 1/C "\=" L^2/16A "\ "(Equation"\ " 2) Pore size. Pore size was quantified using ImageJ. Micrographs were calibrated with the scale bar, and image preprocessing (contrast enhancement and threshold adjustment) was applied to delineate pore boundaries. Approximately 45 pores were analyzed per sample, and the equivalent circular diameter was calculated from the pore area. Results were reported as mean ± standard deviation (SD) to describe pore size distribution., [Methods for processing the data] The files contain raw data obtained through rheological measurements, pore size determination and printability tests are organized in EXCEL files to improve visualization., This dataset contains raw data from obtained through oscillatory rheological measurements, pore size determination and printability tests organized in EXCEL files and employed in the study “Genipin-Crosslinked Pectin Hydrogels: A Dual Strategy for Enhanced 3D Printability and Stability”, This research has been funded by the projects PID2020-113045GB-C22 and PID2023-149734NB-C21 by MCIN/AEI/10.13039/501100011033, the “Industrial Doctorate” call (DIN2019-010868), and the DIGIMATER-CM project (TEC-2024/TEC-102) funded by the Community of Madrid, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexadecylamine Addition Promotes Crystallization-Driven Functionalities in Freezing–Thaw PVA Hydrogels

  • Alvear-Jiménez, Alexis
  • Fernández, Mercedes
  • Müller, Alejandro J.
  • Hernández, Rebeca
Poly(vinyl alcohol) (PVA) is widely employed for hydrogel fabrication due to its ability to form stable, physically or chemically cross-linked three-dimensional networks. Among production methods, the freezing-thaw (F-T) technique stands out for its simplicity and effectiveness. This study presents a straightforward methodology for preparing functional PVA hydrogels in aqueous media by blending PVA with a crystallizable hexadecyl alkylamine (C16). Incorporating small amounts of hydrophobic, amphiphilic hexadecylamine into PVA hydrogels via freezing-thaw blending significantly alters crystallization and network structure, enabling gel formation in water without surfactants, solvents, or cross-linkers. C16 enhances phase separation and promotes PVA crystalline domains while remaining amorphous. The resulting PVA/C16 hydrogels exhibit enhanced thermomechanical properties, demonstrating additional functionalities such as self-healing and improved adhesion to polar surfaces. This crystallization-driven gelation via immiscible blending offers a scalable strategy with potential in wearable electronics, soft robotics, and biomedical devices., The authors acknowledge Enrique Blázquez for DSC measurements and Isabel Muñoz for Raman measurements. This research was financially supported by the projects PID2020113045GB-C21 and C22 and PID2023-149734NB-C21 and C22 funded by MCIU/AEI/10.13039/501100011033. FPI contract (PRE2021-100838) and ALBA synchrotron granted proposal AV-2023097792., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Genipin-crosslinked pectin hydrogels: A dual strategy for enhanced 3D printability and stability

  • Mercado-Rico, Jorge
  • Pérez, Luis Andrés
  • Alonso, José María
  • Pérez-González, Raúl
  • Sáez-Martínez, Virginia
  • Mascaraque-León, Aroa
  • Haranczyk, Maciej
  • Echeverry-Rendón, Mónica
  • Hernández, Rebeca
The development of polysaccharide-based biomaterial inks with tailored physicochemical properties and dynamic responsiveness currently attracts a lot of scientific interest. Pectin, a natural and biocompatible polysaccharide, shows great promise for a wide range of biomedical applications, but its limited mechanical strength and printability constrain its application in 3D extrusion bioprinting. This study introduces a strategy to overcome these drawbacks via amine modification and genipin crosslinking, producing hydrogels with improved mechanical stability under physiological conditions. Pectin hydrogels formed at various amine:genipin ratios (1:0.6 to 1:3) exhibited elastic moduli values in the range of 3-5 KPa under physiological conditions, with crosslinking efficiency reaching a plateau. Biomaterial inks comprising crosslinked pectin particles were dispersed in a reactive aqueous pectin solution, thus enabling precise 3D extrusion of scaffolds with up to 7 layers, maintaining structural integrity post-lyophilization. The 3D printed pectin hydrogels showed enhanced porosity and swelling kinetics, particularly in response to pH changes, while maintaining high hydrolytic stability and non-cytotoxicity. This approach provides a promising platform for developing dynamic, pectin-based bioinks in bio applications requiring of extrusion based additive manufacturing techniques., This research has been funded by the projects PID2020-113045GB C22 and PID2023-149734NB-C21 by MCIN/AEI/10.13039/ 501100011033, the “Industrial Doctorate” call (DIN2019-010868), and the DIGIMATER-CM project (TEC-2024/TEC-102) funded by the Community of Madrid, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering piezoelectric polymers and peptides for soft biomedical interfaces

  • Serrano-Bellido, Borja
  • Müller, Alejandro J.
  • Criado-González, Miryam
Organic piezoelectric materials, capable of converting mechanical stress into electrical signals and vice versa, are emerging as versatile platforms for biomedical applications. Their electromechanical behavior originates from ordered dipoles within non-centrosymmetric structures, found in polymers, biodegradable polyesters, polysaccharides, amino acids, ultrashort peptides, and fibrous proteins. The piezoelectric performance is strongly influenced by molecular design, chemical functionalization, crystalline phase, hierarchical organization, and processing techniques of those materials. Combining molecular engineering of amino acids and peptides with hierarchical polymer matrices promises tunable electromechanical properties, scalable fabrication, and biodegradable, bioresorbable platforms. These materials enable innovative biomedical technologies, including self-powered nanogenerators for implantable devices, wearable and implantable biosensors for real-time physiological monitoring, scaffolds that deliver localized electrical cues to promote tissue regeneration, and devices for smart drug-release. Collectively, organic piezoelectric materials offer a sustainable, biocompatible, and adaptable foundation for next-generation bioelectronics and regenerative medicine., B. S–B thanks the predoctoral Grant PREP2023-001743 funded by MICIU/AEI/10.13039/501100011033 and FSE+. M. C-G thanks Grant RYC2022-036380-I funded by MICIU/AEI/10.13039/501100011033 and FSE+, and Grant CNS2024-154833 funded by MICIU/AEI/ 10.13039/501100011033. The authors acknowledge funding by the projects PID2023-149734NB-C21 and C22 funded by MCIU/AEI/ 10.13039/501100011033 and by ERDF, EU. This work has received funding from the María de Maeztu Excellence Unit CEX2023-001303 funded by MCIN/AI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porosity Engineered 3D Printed Biopolymer Cryogels for Oil Sorption and Chemical Free Recovery

  • Mercado-Rico, Jorge
  • Esteban-Arranz, Adrián
  • Pérez, Luis Andrés
  • Hernández-Sosa, Alejandro
  • Gallego-Mena, Lidia
  • Capezza, Antonio J.
  • Sánchez-Silva, Luz
  • Hernández, Rebeca
We report the development of protein–polysaccharide hydrogel precursors enabling the additive manufacturing of biopolymer aerogels with tunable porosity and sorption performance. Sodium alginate–bovine serum albumin (BSA) complexes were formulated as shear-thinning, extrusion-printable bioinks that yield mechanically stable architectures with high shape fidelity, including multilayered and hollow structures. Subsequent freeze-drying transformed the printed hydrogels into aerogels while preserving the designed geometries, and the freezing conditions were identified as key structural determinants. Rapid freezing in liquid nitrogen produced highly interconnected porous networks with sustained uptake of hydrophobic oils. In contrast, slow freezing at −20°C generated macroporous architectures characterized by accelerated but lower-capacity sorption; notably, these structures enabled efficient oil release (>80 %) upon simple centrifugation, eliminating the need for chemical recovery. Incorporation of BSA into alginate matrices further loosens the polymer network, enhances pore connectivity, and markedly improves sorption performance, especially under fast-freezing conditions. These findings establish a versatile processing platform that integrates extrusion-based 3D printing with controlled freeze-drying to tailor the hierarchical porosity of renewable biopolymer aerogels. This approach highlights the broader potential of protein–polysaccharide bioinks for engineering tunable aerogel architectures aimed at environmental remediation., This research was financially supported by the projects M-ERA. Net-COFUND2023 PCI2024-153508, Vinnova 2024_00737, and by PID2023-149734NB-C21 funded by MICIU/AEI/10.13039/501100011033 and by FEDER. J.M.R., A.E.A., L.A.P. and R.H., are members are members ofthe Technological Interdisciplinary Platform SUSPLAST+ CSIC. MScNorra Boone is acknowledged for her assistance during the FSC tests. A.Abdirahman, C. Setterberg, F. Svärd and R. Iclal Eren are acknowledgedfor their insights on saline and defibronated sheep blood absorption usingthese cryogels., Peer reviewed