Pasar al contenido principal

DESARROLLOS BASADOS EN POLIFENOLES PARA RETOS CLINICOS EN MEDICINA REGENERATIVA PENDIENTES DE RESOLVER

PID2020-114086RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity, Perspective in Bone Tissue Repair

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Sánchez-Soto, Miguel|||0000-0002-0023-5059
  • Labíková, Magdaléna
  • Hettegger, Hubert|||0000-0002-9343-5673
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • Rojo, Luís|||0000-0001-6334-6736
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • Liebner, Falk|||0000-0002-8244-8153
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Innovative Processing and Sterilization Techniques to Unlock the Potential of Silk Sericin for Biomedical Applications

  • Veiga, Anabela
  • Ramírez-Jiménez, Rosa Ana
  • Santos Rosales, Víctor
  • García González, Carlos A.
  • Aguilar, Maria Rosa
  • Rojo, Luis
  • Oliveira, Ana L.
Silk sericin (SS), a by-product of the textile industry, has gained significant attention for its biomedical potential due to its biocompatibility and regenerative potential. However, the literature lacks information on SS processing methods and the resulting physicochemical properties. This study represents the first step in protocol optimization and standardization. In the present work, different processing techniques were studied and compared on SS extracted from boiling water: evaporation, rotary evaporation, lyophilization, and dialysis, which presented a recovery yield of approximately 27–32%. The goal was to find the most promising process to concentrate extracted SS solutions, and to ensure that the SS structure was highly preserved. As a result, a new cryo-lyophilization methodology was proposed. The proposed method allows for the preservation of the amorphous structure, which offers significant advantages including complete dissolution in water and PBS, an increase in storage stability, and the possibility of scaling-up, making it highly suitable for industrial and biomedical applications. The second part of the work focused on addressing another challenge in SS processing: efficient and non-destructive sterilization. Supercritical CO2 (scCO2) has been gaining momentum in the last years for sterilizing sensitive biopolymers and biological materials due to its non-toxicity and mild processing conditions. Thus, scCO2 technology was validated as a mild technique for the terminal sterilization of SS. In this way, it was possible to engineer a sequential cryo-lyophilization/scCO2 sterilization process which was able to preserve the original properties of this natural silk protein. Overall, we have valorized SS into a sterile, off-the-shelf, bioactive, and water-soluble material, with the potential to be used in the biomedical, pharmaceutical, or cosmetic industries.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomimetic gradient scaffolds containing hyaluronic acid and sr/zn folates for osteochondral tissue engineering

  • Asensio, Gerardo
  • Benito-Garzón, Lorena
  • Ramírez-Jiménez, Rosa Ana
  • Guadilla, Yasmina
  • González-Rubio, Julián
  • Abradelo, Cristina
  • Parra, Juan
  • Martín-López, María Rocío
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
  • Rojo, Luis
Regenerative therapies based on tissue engineering are becoming the most promising alternative for the treatment of osteoarthritis and rheumatoid arthritis. However, regeneration of full-thickness articular osteochondral defects that reproduces the complexity of native cartilage and osteochondral interface still remains challenging. Hence, in this work, we present the fabrication, physic-chemical characterization, and in vitro and in vivo evaluation of biomimetic hierarchical scaffolds that mimic both the spatial organization and composition of cartilage and the osteochondral interface. The scaffold is composed of a composite porous support obtained by cryopolymerization of poly(ethylene glycol) dimethacrylate (PEGDMA) in the presence of biodegradable poly(D,L-lactide-co-glycolide) (PLGA), bioactive tricalcium phosphate β-TCP and the bone promoting strontium folate (SrFO), with a gradient biomimetic photo-polymerized methacrylated hyaluronic acid (HAMA) based hydrogel containing the bioactive zinc folic acid derivative (ZnFO). Microscopical analysis of hierarchical scaffolds showed an open interconnected porous open microstructure and the in vitro behaviour results indicated high swelling capacity with a sustained degradation rate. In vitro release studies during 3 weeks indicated the sustained leaching of bioactive compounds, i.e., Sr, Zn and folic acid, within a biologically active range without negative effects on human osteoblast cells (hOBs) and human articular cartilage cells (hACs) cultures. In vitro co-cultures of hOBs and hACs revealed guided cell colonization and proliferation according to the matrix microstructure and composition. In vivo rabbit-condyle experiments in a critical-sized defect model showed the ability of the biomimetic scaffold to promote the regeneration of cartilage-like tissue over the scaffold and neoformation of osteochondral tissue., This research was funded by Spanish MICINN (MAT201573656-JIN), AEI-MICINN (PID2020- 114086RB-100) and CAM (IND2018/BMD-9485)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable and Biocompatible Thermoplastic Poly(Ester-Urethane)s Based on Poly(ε-Caprolactone) and Novel 1,3-Propanediol Bis(4-Isocyanatobenzoate) Diisocyanate: Synthesis and Characterization

  • Rubio Hernández-Sampelayo, Alejandra
  • Navarro Crespo, Rodrigo
  • González-García, Dulce M.
  • García-Fernández, Luis
  • Ramírez-Jiménez, Rosa Ana
  • Aguilar, María Rosa
  • Marcos-Fernández, Ángel
A series of non-toxic biodegradable and biocompatible polyurethanes bearing p-aminobenzoate moieties are presented. The introduction of this attractive motif was carried out by the synthesis of a novel isocyanate. These biodegradable polymers were chemically and physically characterized by several techniques and methods including bioassay and water uptake measurements. The molecular weight of the soft segment (poly-ε-caprolactone, PCL) and hard segment crystallinity dictated the mechanical behavior and water uptake. The behavior of short PCL-based polyurethanes was elastomeric, whilst increasing the molecular weight of the soft segment led to plastic polyurethanes. Water uptake was hindered for long PCL due to the crystallization of the soft segment within the polyurethane matrix. Furthermore, two different types of chain extender, hydrolyzable and non-hydrolyzable, were also evaluated: polyurethanes based on hydrolyzable chain extenders reached higher molecular weights, thus leading to a better performance than their unhydrolyzable counterparts. The good cell adhesion and cytotoxicity results demonstrated the cell viability of human osteoblasts on the surfaces of these non-toxic biodegradable polyurethanes., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) through the research projects MAT2017-87204-R, RTI2018-096636-J-100, PID2020-119047RB-I00, PID2020-114086RB-100 and PLEC2021-007793, CIBER-BBN (Instituto de Salud Carlos III, Spain) and by CSIC through the intramural project 20190E00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chondroitin and Dermatan Sulfate Bioinks for 3D Bioprinting and Cartilage Regeneration

  • Lafuente-Merchan, M.
  • Ruiz-Alonso, S.
  • Zabala, A.
  • Gálvez Martín, Patricia
  • Marchal, J. A.
  • Vázquez-Lasa, Blanca
  • Gallego, I.
  • Saenz-del-Burgo, L.
  • Pedraz, José Luís
Cartilage is a connective tissue which a limited capacity for healing and repairing. In this context, osteoarthritis (OA) disease may be developed with high prevalence in which the use of scaffolds may be a promising treatment. In addition, three-dimensional (3D) bioprinting has become an emerging additive manufacturing technology because of its rapid prototyping capacity and the possibility of creating complex structures. This study is focused on the development of nanocellulose-alginate (NC-Alg) based bioinks for 3D bioprinting for cartilage regeneration to which it is added chondroitin sulfate (CS) and dermatan sulfate (DS). First, rheological properties are evaluated. Then, sterilization effect, biocompatibility, and printability on developed NC-Alg-CS and NC-Alg-DS inks are evaluated. Subsequently, printed scaffolds are characterized. Finally, NC-Alg-CS and NC-Alg-DS inks are loaded with murine D1-MSCs-EPO and cell viability and functionality, as well as the chondrogenic differentiation ability are assessed. Results show that the addition of both CS and DS to the NC-Alg ink improves its characteristics in terms of rheology and cell viability and functionality. Moreover, differentiation to cartilage is promoted on NC-Alg-CS and NC-Alg-DS scaffolds. Therefore, the utilization of MSCs containing NC-Alg-CS and NC-Alg-DS scaffolds may become a feasible tissue engineering approach for cartilage regeneration., The authors thank the Basque Government for granted fellowship to S.Ruiz-Alonso (PRE_2020_2_0143). This study was financially supported bythe Basque Country Government (IT907-16), the Ministerio de Economía,Industria y Competitividad (FEDER funds, project RTC-2016-5451-1). Theyalso wish to thank the intellectual and technical assistance from the ICTS“NANBIOSIS,” more specifically by the Drug Formulation Unit (U10)of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the University of Basque Country (UPV/EHU). This research wasalso supported by Fundación Mutua Madrileña (project FMM-AP17196-2019), Consejería de Economía, Conocimiento, Empresas y Universi-dad de la Junta de Andalucía (ERDF funds, projects B-CTS-230-UGR18,SOMM17-6109, and P18-FR-2465), and the Instituto de Salud Carlos III,ERDF funds (DTS19/00145 and DTS21/00098). The authors also thank toSpanish Ministry of Science and Innovation (MICINN) (project PID2020-114086RB-100). The corresponding author information was updated onMarch 14, 2022.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the Rheological Properties of Self-Assembled Tripeptide/Alginate/Cellulose Hydrogels for 3D Printing

  • Hernández-Sosa, Alejandro
  • Ramírez-Jiménez, Rosa Ana
  • Rojo, Luis
  • Boulmedais, F.
  • Aguilar, María Rosa
  • Criado-González, Miryam
  • Hernández, Rebeca
3D printing is an emerging and powerful technique to create shape-defined three-dimensional structures for tissue engineering applications. Herein, different alginate–cellulose formulations were optimized to be used as printable inks. Alginate (Alg) was chosen as the main component of the scaffold due to its tunable mechanical properties, rapid gelation, and non-toxicity, whereas microcrystalline cellulose (MCC) was added to the hydrogel to modulate its mechanical properties for printing. Additionally, Fmoc-FFY (Fmoc: 9-fluorenylmethoxycarbonyl; F: phenylalanine; Y: tyrosine), a selfassembled peptide that promotes cell adhesion was incorporated into the ink without modifying its rheological properties and shear-thinning behavior. Then, 3D-printed scaffolds made of Alg, 40% of MCC inks and Fmoc-FFY peptide were characterized by scanning electron microscopy and infrared spectroscopy, confirming the morphological microstructure of the hydrogel scaffolds with edged particles of MCC homogeneously distributed within the alginate matrix and the self-assembly of the peptide in a β-sheet conformation. Finally, the cytocompatibility of the scaffolds was tested in contact with the MG63 osteosarcoma cells, confirming the absence of cytotoxic components that may compromise their viability. Interestingly, MG63 cell growth was retarded in the scaffolds containing the peptide, but cells were more likely to promote adhesive interactions with the material rather than with the other cells, indicating the benefits of the peptide in promoting biological functionality to alginate-based biomaterials., Financial support from the Spanish Research Council (CSIC) and French Research Council (CNRS) for the project PICS (International Emerging Actions) 2018 HYDROPRINT is gratefully acknowledged. The authors also acknowledge funding from CIBER-BBN and MICINN (PID2020- 113045GB-C22 and PID2020-114086RB-I00). R.H., L.R., and M.R.A. are members of the SUSPLAST+ platform of the CSIC and L.R. and M.R.A. are members of the HUB Nanomedicine CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial polymeric biomaterials based on synthetic, nanotechnology, and biotechnological approaches

  • Rojo, Luis
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
Antimicrobial resistance is the main threat to biomaterial failure with a huge impact on National Health Systems and patients’ quality of life. Materials engineering and biotechnology have experienced great advances and have converged in the development of new and more sophisticated biomimetic systems with antimicrobial properties. In this sense, polymeric biomaterials play and will play a key role in the development of new antimicrobial devices for biomedical applications. In this Current Opinion article, we review recent and relevant advances reported in the field of polymeric biomaterials with antimicrobial properties with the potential to be applied in the clinic, that is, antimicrobial polymers, antifouling surfaces, nanodelivery systems of antibiotics and antiseptic drugs, biocide polymer-metal hybrid systems, and engineered living materials that actively interact with the pathogen. We conclude with a discussion on the implications of the results for clinical practice and future research., This work was supported by MICINN (Spain) (PID2020-114086RB-100). Authors are members of the SusPlast+ platform from CSIC (Spain). This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048) (Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Methotrexate Complexes Endowed with New Biological Properties Envisioned for Musculoskeletal Regeneration in Rheumatoid Arthritis Environments

  • Fernández-Villa, Daniel
  • Ramírez-Jiménez, Rosa Ana
  • Aranaz, Inmaculada
  • Acosta, Niuris
  • Vázquez-Lasa, Blanca
  • Rojo, Luis
Methotrexate (MTX) administration is the gold standard treatment for rheumatoid arthritis (RA), but its effects are limited to preventing the progression of the disease. Therefore, effective regenerative therapies for damaged tissues are still to be developed. In this regard, MTX complexes of general molecular formula M(MTX)·xHO, where M = Sr, Zn, or Mg, were synthesized and physicochemically characterized by TGA, XRD, NMR, ATR–FTIR, and EDAX spectroscopies. Characterization results demonstrated the coordination between the different cations and MTX via two monodentate bonds with the carboxylate groups of MTX. Cation complexation provided MTX with new bioactive properties such as increasing the deposition of glycosaminoglycans (GAGs) and alternative anti-inflammatory capacities, without compromising the immunosuppressant properties of MTX on macrophages. Lastly, these new complexes were loaded into spray-dried chitosan microparticles as a proof of concept that they can be encapsulated and further delivered in situ in RA-affected joints, envisioning them as a suitable alternative to oral MTX therapy., This research has been funded by the Spanish MICINN (MAT201573656-JIN; PID2020- 114086RB-100 and PID2019-105337RB-C22). D.F.-V. is financially supported by a predoctoral program MICINN FPU18/04683. B.V.-L. and L.R. are members of the Interdisciplinary Platform SusPlast+, CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Role of Polymeric Biomaterials in the Treatment of Articular Osteoarthritis

  • Velasco-Salgado, Carmen
  • Pontes-Quero, Gloria María
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • de Wit, Kyra
  • Vázquez-Lasa, Blanca
  • Rojo, Luis
  • Abradelo, Cristina
Osteoarthritis is a high-prevalence joint disease characterized by the degradation of cartilage, subchondral bone thickening, and synovitis. Due to the inability of cartilage to self-repair, regenerative medicine strategies have become highly relevant in the management of osteoarthritis. Despite the great advances in medical and pharmaceutical sciences, current therapies stay unfulfilled, due to the inability of cartilage to repair itself. Additionally, the multifactorial etiology of the disease, including endogenous genetic dysfunctions and exogenous factors in many cases, also limits the formation of new cartilage extracellular matrix or impairs the regular recruiting of chondroprogenitor cells. Hence, current strategies for osteoarthritis management involve not only analgesics, anti-inflammatory drugs, and/or viscosupplementation but also polymeric biomaterials that are able to drive native cells to heal and repair the damaged cartilage. This review updates the most relevant research on osteoarthritis management that employs polymeric biomaterials capable of restoring the viscoelastic properties of cartilage, reducing the symptomatology, and favoring adequate cartilage regeneration properties., This research was funded by the Spanish MICINN (PID2020-114086RB-100) and CIBERBBN, ISCIII, Spain. M.R.A., L.G.-F., B.V.-L. and L.R are members of the Interdisciplinary Platform SusPlast+, CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting

  • Puertas-Bartolomé, María
  • Włodarczyk-Biegun, Małgorzata K.
  • del Campo, A.
  • Vázquez-Lasa, Blanca
  • San Román, Julio
Efficient wound treatments to target specific events in the healing process of chronic wounds constitute a significant aim in regenerative medicine. In this sense, nanomedicine can offer new opportunities to improve the effectiveness of existing wound therapies. The aim of this study was to develop catechol bearing polymeric nanoparticles (NPs) and to evaluate their potential in the field of wound healing. Thus, NPs wound healing promoting activities, potential for drug encapsulation and controlled release, and further incorporation in a hydrogel bioink formulation to fabricate cell-laden 3D scaffolds are studied. NPs with 2 and 29 M % catechol contents (named NP2 and NP29) were obtained by nanoprecipitation and presented hydrodynamic diameters of 100 and 75 nm respectively. These nanocarriers encapsulated the hydrophobic compound coumarin-6 with 70% encapsulation efficiency values. In cell culture studies, the NPs had a protective effect in RAW 264.7 macrophages against oxidative stress damage induced by radical oxygen species (ROS). They also presented a regulatory effect on the inflammatory response of stimulated macrophages and promoted upregulation of the vascular endothelial growth factor (VEGF) in fibroblasts and endothelial cells. In particular, NP29 were used in a hydrogel bioink formulation using carboxymethyl chitosan and hyaluronic acid as polymeric matrices. Using a reactive mixing bioprinting approach, NP-loaded hydrogel scaffolds with good structural integrity, shape fidelity and homogeneous NPs dispersion, were obtained. The in vitro catechol NPs release profile of the printed scaffolds revealed a sustained delivery. The bioprinted scaffolds supported viability and proliferation of encapsulated L929 fibroblasts over 14 days. We envision that the catechol functionalized NPs and resulting bioactive bioink presented in this work offer promising advantages for wound healing applications, as they: 1) support controlled release of bioactive catechol NPs to the wound site; 2) can incorporate additional therapeutic functions by co-encapsulating drugs; 3) can be printed into 3D scaffolds with tailored geometries based on patient requirements., Authors thank CIBER-BBN (Spain) and the Spanish Ministry of Economy and Competitivity (M. Puertas-Bartolomé scholarship BES-2015-075161) and the Spanish Ministry of Science and Innovation (PID2020-114086RB-100) for supporting this work. The authors acknowledge RegenHu company, and particularly: Sandro Figi, Dominic Ernst, Michael Kuster and Andreas Scheidegger, for the fruitful collaboration, development and providing the mixing tool. The authors thank Dr. Emmanuel Terriac from INM, Germany for assistance in the confocal imaging. B. Vázquez-Lasa is a member of the SusPlast platform from CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically crosslinked hyaluronic acid-chitosan hydrogel for application on cartilage regeneration

  • Escalante, Sandra
  • Rico, Gustavo
  • Becerra, José
  • San Román, Julio
  • Vázquez-Lasa, Blanca
  • Aguilar, María Rosa
  • Durán, Iván
  • García-Fernández, Luis
Articular cartilage is an avascular tissue that lines the ends of bones in diarthrodial joints, serves as support, acts as a shock absorber, and facilitates joint’s motion. It is formed by chondrocytes immersed in a dense extracellular matrix (principally composed of aggrecan linked to hyaluronic acid long chains). Damage to this tissue is usually associated with traumatic injuries or age-associated processes that often lead to discomfort, pain and disability in our aging society. Currently, there are few surgical alternatives to treat cartilage damage: the most commonly used is the microfracture procedure, but others include limited grafting or alternative chondrocyte implantation techniques, however, none of them completely restore a fully functional cartilage. Here we present the development of hydrogels based on hyaluronic acid and chitosan loaded with chondroitin sulfate by a new strategy of synthesis using biodegradable di-isocyanates to obtain an interpenetrated network of chitosan and hyaluronic acid for cartilage repair. These scaffolds act as delivery systems for the chondroitin sulfate and present mucoadhesive properties, which stabilizes the clot of microfracture procedures and promotes superficial chondrocyte differentiation favoring a true articular cellular colonization of the cartilage. This double feature potentially improves the microfracture technique and it will allow the development of next-generation therapies against articular cartilage damage., This work was supported by the Ministry of Science, Innovation and Universities (Spain) (PID 2020-114086RB-I00 and PID 2020-117255RB-I00-VASCUBONE) and by the Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN, project name: HYDROCARTREG). This research work was performed in the framework of the Nanomedicine CSIC HUB (ref202180E048) and BV-L, LG-F and MRA are members of the SusPlast + platform from the CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antiaging properties of antioxidant photoprotective polymeric nanoparticles loaded with coenzyme-Q10

  • Huerta-Madroñal, Miguel
  • Espinosa-Cano, Eva
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
Skin is the most extensive organ within our body. It is continually subjected to stress factors, among which ultraviolet irradiation, a key factor responsible in skin aging since it leads to reactive oxygen species production. In order to fight against these oxidative species, the human body has an innate robust antioxidant mechanism composed of several different substances, one of which is coenzyme Q. Its capacity to increase cellular energy production and excellent antioxidant properties have been proved, as well as its antiaging properties being able to attenuate cellular damage induced by ultraviolet irradiation in human dermal fibroblasts. However, its high hydrophobicity and photolability hampers its therapeutic potential. In this context, the objective of this work consists of the preparation of chitosan-rosmarinic acid conjugate-based nanoparticles to encapsulate coenzyme Q10 with high encapsulation efficiencies in order to improve its bioavailability and broaden its therapeutic use in skin applications. Hyaluronic acid coating was performed giving stable nanoparticles at physiological pH with 382 ± 3 nm of hydrodynamic diameter (0.04 ± 0.02 polydispersity) and − 18 ± 3 mV of surface charge. Release kinetics studies showed a maximum of 82 % mass release of coenzyme Q after 40 min, and radical scavenger activity assay confirmed the antioxidant character of chitosan-rosmarinic acid nanoparticles. Hyaluronic acid-coated chitosan-rosmarinic acid nanoparticles loaded with coenzyme Q were biocompatible in human dermal fibroblasts and exhibited interesting photoprotective properties in ultraviolet irradiated cells. In addition, nanoparticles hindered the production of reactive oxygen species, interleukin-6 and metalloproteinase-1, as well as caspase-9 activation maintaining high viability values upon irradiation of dermal fibroblasts. Overall results envision a great potential of these nanovehicles for application in skin disorders or antiaging treatments., This work was supported by MICINN (Spain) (PID2020-114086RB-100 and PRE2018-083873M. Huerta's scholarship). M. R. Aguilar and B. Vazquez-Lasa are members of the SusPlast+ platform from CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048). Authors thank Rosa Ana Ramirez (ICTP CSIC) the assistance in the biological assays, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ketoprofen-based polymer-drug nanoparticles provide anti-inflammatory properties to HA/Collagen hydrogels

  • Halfter, N.
  • Espinosa-Cano, Eva
  • Pontes-Quero, Gloria María
  • Ramírez-Jiménez, Rosa Ana
  • Heinemann, Christiane
  • Möller, Stephanie
  • Schnabelrauch, Matthias
  • Wiesmann, Hans-Peter
  • Hintze, Vera
  • Aguilar, María Rosa
Current limitations of wound dressings for treating chronic wounds require the development of novel approaches. One of these is the immune-centered approach, which aims to restore the pro-regenerative and anti-inflammatory properties of macrophages. Under inflammatory conditions, ketoprofen nanoparticles (KT NPs) can reduce pro-inflammatory markers of macrophages and increase anti-inflammatory cytokines. To assess their suitability as part of wound dressings, these NPs were combined with hyaluronan (HA)/collagen-based hydro- (HGs) and cryogels (CGs). Different HA and NP concentrations and loading techniques for NP incorporation were used. The NP release, gel morphology, and mechanical properties were studied. Generally, colonialization of the gels with macrophages resulted in high cell viability and proliferation. Furthermore, direct contact of the NPs to the cells reduced the level of nitric oxide (NO). The formation of multinucleated cells on the gels was low and further decreased by the NPs. For the HGs that produced the highest reduction in NO, extended ELISA studies showed reduced levels of the pro-inflammatory markers PGE2, IL-12 p40, TNF-α, and IL-6. Thus, HA/collagen-based gels containing KT NPs may represent a novel therapeutic approach for treating chronic wounds. Whether effects observed in vitro translate into a favorable profile on skin regeneration in vivo will require rigorous testing., This work was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) project number 59307082—TRR67 subprojects A3, Z3, and MICINN (Spain) (PID2020-114086RB-I00). E. Espinosa-Cano would like to thank the training program for Academic Staff (FPU15/06109) of the Spanish Ministry of Education, Culture, and Sport. M.R. Aguilar is a member of the SusPlast+ platform from CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048). V. Hintze acknowledges financial support by the TU Dresden “Zukunftskonzept” regarding the CellScale Microsquisher, which was financed from funds of the excellence initiative of the federal and state governments of Germany., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polifenoles: propiedades y papel en desarrollos biomédicos

  • Huerta-Madroñal, Miguel
  • Aguilar, María Rosa
  • Vázquez-Lasa, Blanca
Una dieta saludable es vital para nuestra salud ya que ayuda a prevenir malnutrición y diversas enfermedades. Los polifenoles son sustancias que se encuentra en mayor proporción en los productos de origen vegetal y que han demostrado tener beneficiosas propiedades para la salud humana debido a su gran carácter antioxidante. Por esto, en los últimos años se han desarrollado numerosos trabajos dirigidos a la utilización de estos compuestos en sistemas poliméricos para aplicaciones biomédicas. Con el objetivo de paliar los problemas de biodisponibilidad de los polifenoles, se han desarrollado diferentes estrategias basadas en la nanotecnología que han demostrado ser efectivas para la liberación de estos compuestos. Un ejemplo es el reciente desarrollo del conjugado de ácido rosmarínico y quitosano con excelentes propiedades biológicas que lo hacen un interesante biomaterial para aplicaciones en piel., A healthy diet is critical for our well-being since it helps to prevent malnutrition and different diseases. Polyphenols are chemical substances mainly found in plants-based products with proven beneficial properties for human health due to its antioxidant power. For this reason, over the last years numerous works have described the use of these compounds in polymeric systems for biomedical applications. In order to mitigate bioavailability issues of polyphenols, different nanotechnology-based strategies with demonstrated efficacy have been developed for the delivery of polyphenols. An example is the development of novel chitosan-rosmarinic acid conjugates with excellent biological properties that makes them an interesting biomaterial for skin applications., Los autores agradecen al MICINN la financiación recibida, proyecto PID2020-114086RB y beca a Miguel Huerta Madroñal dentro del programa predoctoral de formación de personal investigador (PRE2018-083873).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DEAE/Catechol-Chitosan Conjugates as Bioactive Polymers: Synthesis, Characterization, and Potential Applications

  • Caro-León, F. J.
  • López-Donaire, M. L.
  • Vázquez, Roberto
  • Huerta-Madroñal, Miguel
  • Lizardi-Mendoza, J.
  • Argüelles-Monal, W.
  • Fernández-Quiroz, D.
  • García-Fernández, Luis
  • San Román, Julio
  • Vázquez-Lasa, Blanca
  • García González, Pedro
  • Aguilar, María Rosa
This work provides the first description of the synthesis and characterization of water-soluble chitosan (Cs) derivatives based on the conjugation of both diethylaminoethyl (DEAE) and catechol groups onto the Cs backbone (Cs-DC) in order to obtain a Cs derivative with antioxidant and antimicrobial properties. The degree of substitution [DS (%)] was 35.46% for DEAE and 2.53% for catechol, determined by spectroscopy. Changes in the molecular packing due to the incorporation of both pendant groups were described by X-ray diffraction and thermogravimetric analysis. For Cs, the crystallinity index was 59.46% and the maximum decomposition rate appeared at 309.3 °C, while for Cs-DC, the values corresponded to 16.98% and 236.4 °C, respectively. The incorporation of DEAE and catechol groups also increases the solubility of the polymer at pH > 7 without harming the antimicrobial activity displayed by the unmodified polymer. The catecholic derivatives increase the radical scavenging activity in terms of the half-maximum effective concentration (EC). An EC of 1.20 μg/mL was found for neat hydrocaffeic acid (HCA) solution, while for chitosan-catechol (Cs-Ca) and Cs-DC solutions, concentrations equivalent to free HCA of 0.33 and 0.41 μg/mL were required, respectively. Cell culture results show that all Cs derivatives have low cytotoxicity, and Cs-DC showed the ability to reduce the activity of reactive oxygen species by 40% at concentrations as low as 4 μg/mL. Polymeric nanoparticles of Cs derivatives with a hydrodynamic diameter (D) of around 200 nm, unimodal size distributions, and a negative ζ-potential were obtained by ionotropic gelation and coated with hyaluronic acid in aqueous suspension, providing the multifunctional nanoparticles with higher stability and a narrower size distribution., This work was funded by the Spanish Ministry of Science and Innovation (PID2020-114086RB-100). F.J.C.-L. acknowledges financial support from CONACyT (México) through the scholarship ‘Apoyo para estancias postdoctorales en el extranjero vinculadas a la consolidación de grupos de investigación y fortalecimiento del Posgrado nacional’. M.R.A. and B.V.-L. are members of the SusPlast platform from CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048). The authors thank R.A.R. from (ICTP), CSIC, for assistance in the biological experiments, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocarrier of α-Tocopheryl Succinate Based on a Copolymer Derivative of (4,7-dichloroquinolin-2-yl)methanol and Its Cytotoxicity against a Breast Cancer Cell Line

  • Valle, Hernán
  • Palao Suay, Raquel
  • Aguilar, María Rosa
  • Lerma, Tulio A.
  • Palencia, Manuel
  • Mangalaraja, R.V.
  • Guzmán, Leonardo
  • Pérez Sotelo, Dairo
  • Becerra, José
In order to improve the water solubility and, therefore, bioavailability and therapeutic activity of anticancer hydrophobic drug α-tocopherol succinate (α-TOS), in this work, copolymers were synthesized via free radicals from QMES (1-[4,7-dichloroquinolin-2-ylmethyl]-4-methacryloyloxyethyl succinate) and VP (N-vinyl-2-pirrolidone) using different molar ratios, and were used to nanoencapsulate and deliver α-TOS into cancer cells MCF-7. QMES monomer was chosen because the QMES pendant group in the polymer tends to hydrolyze to form free 4,7-dichloro-2-quinolinemethanol (QOH), which also, like α-TOS, exhibit anti-proliferative effects on cancerous cells. From the QMES-VP 30:70 (QMES-30) and 40:60 (QMES-40) copolymers obtained, it was possible to prepare aqueous suspensions of empty nanoparticles (NPs) loaded with α-TOS by nanoprecipitation. The diameter and encapsulation efficiency (%EE) of the QMES-30 NPs loaded with α-TOS were 128.6 nm and 52%; while for the QMES-40 NPs loaded with α-TOS, they were 148.8 nm and 65%. The results of the AlamarBlue assay at 72 h of treatment show that empty QMES-30 NPs (without α-TOS) produced a marked cytotoxic effect on MCF-7 breast cancer cells, corresponding to an IC50 value of 0.043 mg mL−1, and importantly, they did not exhibit cytotoxicity against healthy HUVEC cells. Furthermore, NP-QMES-40 loaded with α-TOS were cytotoxic with an IC50 value of 0.076 mg mL−1, demonstrating a progressive release of α-TOS; however, the latter nanoparticles were also cytotoxic to healthy cells in the range of the assayed concentrations. These results contribute to the search for a new polymeric nanocarrier of QOH, α-TOS or other hydrophobic drugs for the treatment of cancer or others diseases treatable with these drugs., This research was funded by National Agency for Research and Development of Chile (ANID), through the project ANID/FONDECYT Initiation 11191065. This work was also supported by MICINN, Spain (PID2020-114086RB-100)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sistemas inyectables de origen natural y aplicación mínimamente invasiva para regeneración tisular

  • Fernández-Villa, Daniel
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Rojo, Luis
  • Vázquez-Lasa, Blanca
Durante la última década, la investigación en medicina de precisión para abordar la regeneración de tejidos dañados ha crecido exponencialmente, dando lugar a múltiples estrategias terapéuticas. En este sentido, el desarrollo de sistemas biomédicos basados en materiales inyectables ha sido uno de los que mayor repercusión ha tenido debido a su gran adaptabilidad y maleabilidad. Con esto en cuenta, en este artículo se han revisado tres de estos acercamientos incluyendo sistemas de liberación de fármacos, técnicas de manufactura aditiva o bio-fabricación y sistemas de microfluídica como vehículos para terapias celulares; usando como ejemplos explicativos sistemas inyectables y mínimamente invasivos desarrollados por el Grupo de Biomateriales del Instituto de Ciencia y Tecnología de Polímeros del CSIC y compuestos exclusivamente por polímeros naturales., Since the last decade, research on precision medicine aiming for damaged tissue regene- ration has grown exponentially, giving rise to multiple therapeutic strategies. In this re- gard, the development of biomedical systems based on injectable materials has been one of the most exploited approaches due to their inherent adaptability and tuneability. Taking this into account, in this article we have re- viewed three of these strategies including drug delivery systems, additive manufactu- ring or bio-fabrication techniques, and micro- fluidics as vehicles for cell therapies; by using as explanatory examples minimally invasive, injectable systems composed of natural poly- mers which have been developed by the Bio- materials group at the Institute of Polymers Science and Technology of the Spanish Natio- nal Research Council., Este es un artículo de divulgación incluido en el programa de actividades de los pro- yectos POLYPHILLED, financiado por MICINN (PID2020-114086RB-10); RADIOPROTECT- CM, financiado por la Comunidad Autónoma de Madrid (P2022/BMD-7406); así como den- tro de la Plataforma Tecnológica Interdisci- plinar SusPlast+ y la Conexión Nanomedici- na del Consejo Superior de Investigaciones Científicas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanofibrous ε-Polycaprolactone Matrices Containing Nano-Hydroxyapatite and Humulus lupulus L. Extract: Physicochemical and Biological Characterization for Oral Applications

  • Villanueva-Lumbreras, Jaime
  • Rodriguez, Ciro
  • Aguilar, María Rosa
  • Avilés-Arnaut, Hamlet
  • Cordell, Geoffrey A.
  • Rodriguez-Garcia, Aida
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Oral bone defects occur as a result of trauma, cancer, infections, periodontal diseases, and caries. Autogenic and allogenic grafts are the gold standard used to treat and regenerate damaged or defective bone segments. However, these materials do not possess the antimicrobial properties necessary to inhibit the invasion of the numerous deleterious pathogens present in the oral microbiota. In the present study, poly(ε-caprolactone) (PCL), nano-hydroxyapatite (nHAp), and a commercial extract of Humulus lupulus L. (hops) were electrospun into polymeric matrices to assess their potential for drug delivery and bone regeneration. The fabricated matrices were analyzed using scanning electron microscopy (SEM), tensile analysis, thermogravimetric analysis (TGA), FTIR assay, and in vitro hydrolytic degradation. The antimicrobial properties were evaluated against the oral pathogens Streptococcus mutans, Porphyromonas gingivalis, and Aggregatibacter actinomycetemcomitans. The cytocompatibility was proved using the MTT assay. SEM analysis established the nanostructured matrices present in the three-dimensional interconnected network. The present research provides new information about the interaction of natural compounds with ceramic and polymeric biomaterials. The hop extract and other natural or synthetic medicinal agents can be effectively loaded into PCL fibers and have the potential to be used in oral applications., This study was funded by the Universidad Autónoma de Nuevo León through PAICyT grant SA1550-21, and the National Council for Science and Technology (CONACyT) through the J.V.L. scholarship No. 706724. This work was also supported by MICINN (Spain) (PID2020-114086RB-100). M.R.A. is a member of the Susplast+ platform from CSIC (Spain). This research work was performed as a part of the framework of the Nanomedicine CSIC HUB (ref 202180E048)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemoselective reaction of methoxyaminomethyl BODIPYs with unprotected carbohydrates: a powerful tool for accessing BODIPY neoglycosides

  • Gómez, Ana M.
  • García-Fernández, Luis
  • Santana, Andrés G.
  • Uriel, Clara
  • Gartzia-Rivero, Leire
  • Bañuelos, Jorge
  • García-Moreno, I.
  • Infantes, Lourdes
  • Aguilar, María Rosa
  • López Pérez, J. Cristóbal
10 pags., 8 figs., 4 tabs., The neoglycosylation of methoxyaminomethyl-appended BODIPYs with unprotected reducing mono-, di-, and trisaccharides produces, in a regio- and stereoselective manner, cyclic N-glycosyl-N-methoxy-BODIPY conjugates, as a relevant class of neoglycosides that display excellent photophysical characteristics in pure water, even at high dye concentrations. In addition, the cellular uptake of some of the neoglycosylated BODIPYs has been confirmed via fluorescence microscopy, and a BODIPY-acarbose conjugate showed comparable enzymatic inhibitory activity to acarbose for two different α-amylases: A. oryzae α-amylase (AOA) and human salivary α-amylase (HSA)., This research received financial support from the Spanish Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI) Grants: PID2020-114755GB-C31 and -C33, and PID2021-122504NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. LGR and JB acknowledge Gobierno Vasco for financial support (IT1639-22). MRA and LGF acknowledge financial support from MCIN (PID2020-114086RB-I00) and Comunidad de Madrid (P2022/BMD-7406). MRA and LGF are members of the SusPlast platform from Consejo Superior de Investigaciones Científicas (CSIC). This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity: Perspective in Bone Tissue Repair

  • Rosado, Albert
  • Borrás, Alejandro
  • Sánchez-Soto, Miguel
  • Labíková, Magdaléna
  • Hettegger, Hubert
  • Ramírez-Jiménez, Rosa Ana
  • Rojo, Luis
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Liebner,Falk
  • López Periago, Ana M.
  • Ayllón, José A.
  • Domingo, Concepción
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the de- velopment of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultane- ously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompati- ble microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bio- MOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mecha- nism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays con- firm full biocompatibility and suitability for HOb proliferation., This work was funded by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) with the Spanish National Plan of Research projects PID2020-115631GB-I00, PID2020-114086RB-I00 and PID2019- 106518RB-I00, and also CIBER (Spain)—Consorcio Centro de Investigación Biomédica en Red (CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (202180E048). Furthermore, financial support through the Aus- trian-Czech Project CZ 17/2023 (M.L., H.H.), funded by the Austrian Agency for Education and In- ternationalisation (OeAD), is thankfully acknowledged. M.S.-S. thanks the Generalitat de Catalunya for the grant 2021SGR01042. This work has been performed in the framework of the doctoral pro- gram “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant and AERoGELS Cost Action (CA18125) with regards to a Short-Term Scientific Mission (STSM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Europium-tannic acid nanocomplexes devised for bone regeneration under oxidative or inflammatory environments

  • Fernández-Villa, Daniel
  • Aguilar, María Rosa
  • Rojo, Luis
This paper is dedicated to the memory of Blanca Váquez-Lasa, who participated in the conceptualization and preliminary studies of this work, but lamentably passed away on 31st January 2023., This paper is dedicated to the memory of Blanca Vázquez-Lasa, who participated in the conceptualization and preliminary studies of this work, but lamentably passed away on 31st January 2023. This research has been funded by the Spanish MICINN (PID2020-114086RB-I00) and Comunidad Autónoma de Madrid (S2022/BMD-7406). D. F.-V. is financially supported by a predoctoral program MICINN FPU18/04683. M. R. A. and L. R. are members of PTI-SusPlast+ and Nanomedicine CSIC. The authors would like to acknowledge David Gómez, Pedro González Esperanza Benito and Pilar Posadas of the Characterization Service at the Instituto de Ciencia y Tecnologá de Polímeros (CSIC) for the technical support and EM facilities of the CIB Margarita Salas (CSIC) for support in grid screening and preparation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of tunable hyaluronic acid and O′-carboxymethyl chitosan formulations for the minimally invasive delivery of multifunctional therapies targeting rheumatoid arthritis

  • Fernández-Villa, Daniel
  • Herraiz-Pérez, Aitor
  • De Wit, K.
  • Herranz, Fernando
  • Aguilar, María Rosa
  • Rojo, Luis
This paper is dedicated to the memory of Blanca Vázquez-Lasa, who participated in the conceptualization and preliminary studies of this work, but lamentably passed away on 31st January 2023., The development of injectable, dual-component formulations based on natural-based polysaccharides is a promising strategy for the localized treatment of rheumatoid arthritis (RA). In the present study, biomimetic formulations consisting of aldehyde-functionalized hyaluronic acid (AHA) and O-carboxymethyl chitosan (OCC) were developed, presenting rapid in situ gelation rates and finely tunable physicochemical properties. These two properties allowed for the controlled delivery of anti-inflammatory, antioxidant, and pro-regenerative agents (i.e., strontium-methotrexate (SrMTX) and europium-tannic acid nanocomplexes (EuTA NCs), making them suitable for application in in vivo RA-models. Biological analyses demonstrated the system's cytocompatibility and its ability to modulate the activity of human articular chondrocytes at the secretome level and scavenge nitric oxide (NO). Moreover, the loaded cargoes not only extended the anti-inflammatory properties of the formulation but also the radiolabeling of EuTA NCs with Ga allowed the visualization of the gel by positron emission tomography (PET). Overall, this work presents the design and in vitro evaluation of an easily modulable polymeric system that allows the in situ release of a multifunctional therapy with promising perspectives for RA treatment., This research has been funded by the Spanish MICIU (PID2020-114086RB-I00, PID2023-149301OB-I00, PID2019-104059RB-I00, PDC2022-133493- 100) and Comunidad Autónoma de Madrid (S2022/BMD-7406, S2022/ BMD-7333). D. F.-V. is financially supported by a predoctoral program MICIU FPU18/04683. The authors would like to acknowledge the sup- port of PTI-SusPlast+ CSIC, Nanomedicine CSIC and the NMR service team at the National Center for Organic Chemistry (CENQUIOR-CSIC) for their technical support and expertise
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supercritical CO2 assisted bioMOF drug encapsulation and functionalization for delivery with a synergetic therapeutic value

  • Rosado, Albert
  • García-Fernández, Luis
  • Aguilar, María Rosa
  • Ramírez-Jiménez, Rosa Ana
  • López Periago, Ana M.
  • Ayllón, José A.
  • Doming, Concepción
Despite the impressive characteristics of biological metal organic frameworks (bioMOFs) for their use as drug delivery systems (DDs), there are still some parameters related to their structural stability and processing routes that have decelerated their realistic application in this field. Both drawbacks are unraveled in this work for the microporous bioMOF CaSyr-1 by using supercritical CO2 (scCO2) to load the bioMOF with the anti-tubercular isoniazid (INH) drug, and functionalize its external surface with a hydrophobic protective layer of stearate (S). The hydrophobicized CaSyr-1(INH)/S vehicle is further coated with a neutral surfactant (PS60) to enhance the wettability of the system. In vitro tests, related to drug carrier biocompatibility and drug release in body simulated fluids, are performed to demonstrate potential prospective of the designed DDs in pharmacy. The synthetized product displayed total biocompatibility even at high concentrations, and the particle size and dissolution rate showed to be adequate for pulmonary administration., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2023–001263-S), by the Spanish National Plan of Research with projects PID2020–115631GB-I00 and PID2020–114086RB-100, and by CIBER (Spain) - Consorcio Centro de Investigación Biomédica en Red (Ref. CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (Ref. 202180E048). A.R. acknowledges the financial support of FPI 2019 grant. This work has been performed in the framework of the doctoral program “Chemistry” of the Universitat Autónoma de Barcelona by A. R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production and Characterization of Nanoparticulate Polyelectrolyte Complexes of Chitosan–Catechol, Ulvan, and Hyaluronic Acid

  • Caro-León, Francisco J.
  • Silva-Campa, Erika
  • Navarro-López, René A.
  • Fernández-Quiroz, Daniel
  • Figueroa-León, Vivian A.
  • Trujillo-Ramirez, Maria A.
  • López-Martínez, Luis Miguel
  • Aguilar, María Rosa
  • Álvarez-Bajo, Maria Osiris
This work provides the first description of the synthesis and characterization of polymeric nanoparticles (NPs) obtained by polyelectrolyte complexes (PECs) of three polysaccharides: chitosan (Cs) or its catecholic derivative, ulvan, and hyaluronic acid (HA). The carbodiimide method used catechol group conjugation onto the Cs backbone using the catechol-containing compound hydrocaffeic acid. A degree of substitution of 2.98% was determined by spectroscopy in the chitosan–catechol (CsC) conjugate. DLS studies showed hydrodynamic diameter (Dh) close to 300 nm for PECs of Cs and CsC with ulvan, with positive zeta potential for both complexes. HA coating was confirmed by obtaining negative zeta potential. The HA coating reduced the Dh values of the materials by approximately 100 nm. This resulted in maintaining stability in water suspension for up to 8 weeks, yielding unimodal size distribution. ATR-FTIR spectra confirmed the presence of the polyelectrolytes in the PECs. FE-SEM studies demonstrated that HA-coated NPs exhibited smaller sizes than their uncoated counterparts. PECs with CsC maintained higher free radical scavenging activity than those with unmodified Cs, with the HA coating only reducing antioxidant activity by 16%. All tested NPs demonstrated biocompatibility at concentrations up to 200 μg/mL in ARPE-19 cell cultures derived from human retinal pigment epithelial cells., This work was funded by Spanish Ministry of Science and Innovation (PID2020-114086RB-100). F. J. Caro-León acknowledges financial support from CONAHCyT (México) through the scholarships ‘Apoyo para estancias postdoctorales en el extranjero vinculadas a la consolidación de grupos de investigación y fortalecimiento del Posgrado nacional’ and ‘Estancias posdoctorales por México para la formación y consolidación de las y los investigadores por México’. M.R. Aguilar and B. Vázquez-Lasa are members of the SusPlast platform from CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048). F. J. Caro-León acknowledges Blanca Váz- quez-Lasa (†) and Julio San Román (†) of the Instituto de Ciencia y Tecnología de Polímeros. F. J. Caro-León acknowl- edges Marisol Hernández-Aburto of the Departamento de Ingeniería en Metalurgia y Materiales of Instituto Politécnico Nacional., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ti/Ta-based composite polysaccharide scaffolds for guided bone regeneration in total hip arthroplasty

  • García-Robledo, Hector
  • García-Fernández, Luis
  • Parra, Juan
  • Martín-López, Rocío
  • Vázquez-Lasa, Blanca
  • Torre, Basilio de la
Guided bone regeneration can play an important role in orthopedic applications. This work presents the synthesis and characterization of composite scaffolds based on polysaccharides loaded with microparticles of titanium or tantalum as novel materials proposed for composite systems with promising characteristics for guided bone regeneration. Ti/Ta composite scaffolds were synthesized using chitosan and gellan gum as organic substrates and crosslinked with oxidized dextran resulting in stable inorganic-organic composites. Physico-chemical characterization revealed a uniform distribution of metal nanoparticles within the scaffolds that showed a release of metals lower than 5 %. In vitro biological assays demonstrated that Ta composites exhibit a 2 times higher ALP activity than Ti and a higher capacity to support the full differentiation of human mesenchymal stem cells into osteoblasts. These results highlight their potential for bone regeneration applications., This work was funded by the Spanish Ministry of Science and Innovation (PID2020-114086RB-I00). B.V-L. is member of the SusPlast platform from CSIC. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spontaneous loss of quorum sensing control selects a new high cellulose producing Ancylobacter strain

  • Martirani-Von Abercron, Sophie-Marie
  • Pacheco-Sánchez, Daniel
  • Castillo-Rodríguez, Inés
  • Marín, Patricia
  • Aguilar, María Rosa
  • Fernández-González, Rocío
  • Bertran-Llorens, Salvador
  • Marqués, Silvia
In recent years the number of non-Acetobacteraceae strains shown to produce nanofibrillar cellulose at the levels of the known Acetobacteraceae producers has increased considerably. The Ancylobacter sp. STN1B isolate capable of cellulose production from naphthalene has previously been described. In this study, Ancylobacter sp. STN1A, a spontaneous STN1B mutant able to produce 1.7 to 9.7 times higher levels of cellulose, has been isolated. The STN1A genome showed a 62 kb deletion encompassing a modified rpf quorum sensing signalling system that included a diguanylate cyclase-phosphodiesterase gene. A knock-out mutant of STN1B rpfC sensor kinase gene produced similarly high cellulose levels than STN1A. This confirmed that the overproducing phenotype resulted from the loss of the rpf system, which resulted in three-time higher c-di-GMP levels. The strains were able to grow on several carbon sources and produce cellulose with properties similar to those of K. xylinus processed similarly, as determined using ATR-FTIR, CP/MAS, 13C NMR, XRD, TGA and SEM, although with higher thermal resistance and water holding capacity. Production was higher under static conditions, rendering 2.5 g/L with glycerol. Interestingly, in this strain cellulose is synthesized from a type-III bcs cluster, which lacks BcsC, BcsD and BcsH sub-units. This first thorough characterization of cellulose produced from a type III cellulose synthesis complex reveals its excellent properties., This work is part of the grants PID2020-113144RB-I00 and PID2023- 150287OB-I00 to SM and PID2020-114086RB-I00 to MRA funded by MCIN/AEI/10.13039/501100011033 and grants PDC2021-121193-I00 and PLEC2021-008210 to SM funded by MCIN/AEI/10.13039/ 501100011033 and “European Union Next-Generation-EU/PRTR”. M. R. Aguilar is member of the SusPlast+ platform from CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative Processing and Sterilization Techniques to Unlock the Potential of Silk Sericin for Biomedical Applications

  • Veiga, Anabela
  • Ramírez-Jiménez, Rosa Ana
  • Santos Rosales, Víctor
  • García González, Carlos A.
  • Aguilar, Maria Rosa
  • Rojo, Luis
  • Oliveira, A. L.
Silk sericin (SS), a by-product of the textile industry, has gained significant attention for its biomedical potential due to its biocompatibility and regenerative potential. However, the literature lacks information on SS processing methods and the resulting physicochemical properties. This study represents the first step in protocol optimization and standardization. In the present work, different processing techniques were studied and compared on SS extracted from boiling water: evaporation, rotary evaporation, lyophilization, and dialysis, which presented a recovery yield of approximately 27–32%. The goal was to find the most promising process to concentrate extracted SS solutions, and to ensure that the SS structure was highly preserved. As a result, a new cryo-lyophilization methodology was proposed. The proposed method allows for the preservation of the amorphous structure, which offers significant advantages including complete dissolution in water and PBS, an increase in storage stability, and the possibility of scaling-up, making it highly suitable for industrial and biomedical applications. The second part of the work focused on addressing another challenge in SS processing: efficient and non-destructive sterilization. Supercritical CO2 (scCO2) has been gaining momentum in the last years for sterilizing sensitive biopolymers and biological materials due to its non-toxicity and mild processing conditions. Thus, scCO2 technology was validated as a mild technique for the terminal sterilization of SS. In this way, it was possible to engineer a sequential cryo-lyophilization/scCO2 sterilization process which was able to preserve the original properties of this natural silk protein. Overall, we have valorized SS into a sterile, off-the-shelf, bioactive, and water-soluble material, with the potential to be used in the biomedical, pharmaceutical, or cosmetic industries., This work was financially supported by: National Funds through FCT (Foundation for Science and Technology) under the project UIDB/50016/2020 of the Centre for Biotechnology and Fine Chemistry—CBQF; and by LA/P/0045/2020 (ALiCE), UIDB/00511/2020, and UIDP/00511/2020 (LEPABE), funded by national funds through FCT/MCTES (PIDDAC). AV gratefully acknowledges a doctoral scholarship [2020.08683.BD] from FCT and an ERASMUS + mobility scholarship from the Faculty of Biotechnology, Portuguese Catholic University (ESB-UCP). LR and MRA are funded by the Spanish MICINN (PID2020-114086RB-100, PID2023-149301OB-I00) and Comunidad Autónoma de Madrid (S2022/BMD-7406) and are members of the Technological Interdisciplinary Platform SUSPLAST+. The authors would like to dedicate this work to Blanca Vázquez-Lasa, who participated in the conceptualization of this work but lamentably passed on 31 January 2023. Finally, this work was also funded by MICIU/AEI/10.13039/501100011033 [grant PDC2022-133526-I00], Xunta de Galicia [ED431C2022/2023], ERDF/EU, and the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biofunctional silk sericin hydrogels: A versatile platform with potential for tissue healing and regeneration

  • Veiga, Anabela
  • Ribeiro, Viviana
  • Ramírez-Jiménez, Rosa Ana
  • Aguilar de Armas, María Rosa
  • Rojo, Luis
  • Oliveira, Ana L.
Discarded silk sericin protein (SS) presents a high yet underexplored potential as a biomaterial for tissue engineering (TE). Despite its biocompatibility, antioxidant activity, and moisture retention properties, its poor stability in aqueous media has limited broader application. In this work, we developed and characterized SS-based hydrogels using tannic acid (TA) and horseradish peroxidase (HRP) crosslinking systems to address these limitations and expand their use in skin TE. Hydrogels were prepared using SS concentrations of 2.5 % and 5 % (w/v) and evaluated for rheological behavior (G' ranging from 100 to 10,000 Pa), swelling (up to 24 %), retention capacity (stable over 24-30 h), and degradation in proteolytic environments (mass loss ranging from ∼0-11 %, depending on formulation). TA-crosslinked hydrogels showed strong fluid retention and are suitable for high-moisture 3D wound dressings and coating applications. HRP-crosslinked hydrogels demonstrated tunable mechanical properties, shear-thinning behavior, and full recovery post-deformation, making them ideal for use as bioinks in 3D bioprinting and injectable matrices. In vitro assays confirmed cytocompatibility, with viability exceeding 85 %, and successful cell encapsulation and proliferation. Overall, this study presents a versatile SS-based hydrogel platform with potential for various biomedical applications, particularly in skin tissue healing and regeneration., This work was financially supported by: National Funds through FCT (Foundation for Science and Technology) under the project UIDB/ 50016/2020 of the Centre for Biotechnology and Fine Chemistry - CBQF; by LA/P/0045/2020 (ALiCE), UIDB/00511/2020 and UIDP/00511/ 2020 (LEPABE), funded by national funds through FCT/MCTES (PID- DAC); and IBEROS+ (0072_IBEROS_MAIS_1_E) - Instituto de Bio- fabricación en Red para El Envejecimiento Saludable, funded by “Interreg VI A Españaa – Portugal (POCTEP) 2021–2027. A. Veiga gratefully acknowledges doctoral scholarship [2020.08683.BD] from FCT and ERASMUS + mobility scholarship from the Faculty of biotechnology-Portuguese catholic University (ESB-UCP). MRA and LR are members of Technological Interdisciplinary Platform SUS- PLAST+ and were supported by MICINN PID2020–114086RB-100, PID2023–149301OB-I00 funded by MICIU/AEI (DOI: 10.13039/ 501100011033) and by ERDF/EU and Autonomous Community of Madrid, Spain, grant S2022/BMD-7406 and by CIBER-BBN (Spain) – Consorcio Centro de Investigación Biomédica en Red (Ref. CB06/01/ 0013). VR acknowledge the Individual Junior Research contract 2023.07374.CEECIND/CP2855/CT0006 attributed by FCT., Peer reviewed