Pasar al contenido principal

MATERIALES ELASTOMERICOS SOSTENIBLES: NUEVAS PERSPECTIVAS Y DESARROLLOS

MAT2017-87204-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Ionizing Radiation on the Chemical Structure and the Physical Properties of Polycaprolactones of Different Molecular Weight

  • Navarro Crespo, Rodrigo
  • Burillo, G.
  • Adem, E.
  • Marcos-Fernández, Ángel
Polymers used in the biomedical sector can be exposed to ionizing radiation (X-ray, gamma) in vivo as implants or ex vivo for sterilization purposes (gamma, electron beam). This ionizing radiation can, at certain levels, cause degradation of the polymer. Polycaprolactones (PCL) of different molecular weights were irradiated with electron beam and the changes in their chemical structure and physical properties with the dose were evaluated. Electron beam irradiation produced crosslinking and chain scission in the PCL chain without significant predominance of one mechanism over the other. Minimum dose for gelation decreased with the increase in PCL molecular weight whereas crosslinking efficiency was almost independent of PCL molecular weight. Carboxylic groups, hydroxyl groups and new saturated hydrocarbon species were detected by proton nuclear magnetic resonance (NMR). These species were consistent with a mechanism where chain scission could take place at any bond in the PCL chain with preference in the ¿COO¿CH2¿ bond. Crosslinking decreased significantly the crystallization temperature of PCL. Tensile properties decreased continuously with the increase in dose. Irradiation with gamma rays produced a faster decay in mechanical properties than electron beam., The authors acknowledge the financial support of DGAPA-PAPIIT-UNAM grant IN-103516 in México and Ministry of Economy and Competitiveness (MINECO) grants MAT2014-52644-R and MAT2017-87204-R in Spain. We also acknowledge the technical support provided by MargaritoVásquez and Jesùs Galindo from Instituto de Física-UNAM in the irradiation of the samples with electrons and by Francisco García Flores from Instituto de Ciencias Nucleares-UNAM in the irradiation of the samples with gamma radiation, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A systematic study of macrodiols and poly(ester-urethanes) derived from α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) with different ether [CH2CH2O]m groups. Synthesis and characterization

  • Báez-García, José Eduardo
  • Marcos-Fernández, Ángel
  • Navarro Crespo, Rodrigo
  • García Sánchez, Carolina
  • Ramírez-Hernández, A.
  • Moreno, K. J...
α,ω-Hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) was synthesized by ring-opening polymerization (ROP) of ε-caprolactone (ε-CL).The ROP was catalyzed by ammonium decamolybdate in the presence of ether diols [HO-(CH-CH-O)-H] (where m = 2, 3, 4, 5, 6, and 8) as initiators. The homopolymer HOPCLOH was obtained with the ether group (EG) [HO-PCL-(CH-CH-O)-PCL-OH (HOPCLOH)] as part of the backbone of the polyester with a systematic increase in the segment of the EG. The number average molecular weight (M) for all samples were similar in the range of oligomers (M = 1240–1510 Da) to have a significant effect of the EG. The effect of the EG on the physical properties was evaluated by differential scanning calorimetry (DSC) where the crystallinity of HOPCLOH and the size of the EG showed a relationship inversely proportional. Poly(ester-urethanes) (PEUs) derived from HOPCLOH exhibited an elastomeric behavior, where long chains of EG induced poor mechanical properties. The use and selection of the ether diols as initiators in the ROP of CL to synthesize HOPCLOH was not trivial because these EG substituents affected the crystallinity, and the mechanical properties of their PEUs., José E. Báez thanks the BConsejo Nacional de Ciencia y Tecnología^ (CONACYT) (Proyecto CONACYT Ciencia Básica 284893), Dirección de Apoyo a la Investigación y al Posgrado (DAIP) at University of Guanajuato (UG), and BSistema Nacional de Investigadores (SNI)^ in México for financial support of the work. José E. Báez also thanks to Ángel Marcos-Fernández for believing in these ideas and providing financial support for the reagents through the project MAT2017-87204-R from the Ministry of Economy and Competitiveness (MINECO) of Spain. José E. Báez also thanks to the UG for the recent opportunity to work as an Assistant Professor. Marvin was used for drawing, displaying, and characterizing chemical structures, substructures, and reactions (Marvin Sketch 6.1.3, 2013, ChemAxon; http://www. chemaxon.com); a free software program with an academic license was provided by ChemAxon. Finally, José E. Báez thanks to Gema Reina Mendieta for the acquisition of the NMR spectra., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microscopic State of Polymer Network Chains upon Swelling and Deformation

  • Naumova, A.
  • Agudelo, D. C.
  • Villar, Marcelo A.
  • Vega, Daniel A.
  • Valentín, Juan L.
  • Saalwächter, Kay
We use low-resolution proton NMR to probe the chain deformation in swollen and nonlinearly deformed vulcanized rubber and end-linked PDMS networks on a microscopic level, extending earlier work focusing on uniaxial stretching and isotropic dilation upon swelling toward biaxial deformation and deformation of swollen samples. Previous studies have revealed that chain deformation in bulk samples is best described by tube models, and that chains in swollen samples deform affinely after an initial desinterspersion stage, upon which entanglement-related packing effects are relieved. We test whether a subsequent deformation may also be closer to affine, and find that this is not the case. Unexpectedly, nonisotropic deformation of swollen samples also follows tube-model predictions, which is explained by a dominance of structural inhomogeneities and significant reorganization of the topological constraints active in the swollen and possibly even the bulk state., Partial funding was provided by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) in the framework of the projects SA982/6-1, SA982/9-1, and SA982/ 11-1. A.N. thanks the team at Bahıá Blanca for the generous support provided during her research stay. J.L.V. acknowledges the support provided by the MAT2014-52644-R, MAT2017- 87204-R, and 201860E045 projects., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Similarities between homopolymers and triblock copolymers derived from poly(ε-caprolactone) (PCL) macrodiols (HOPCL–E–PCLOH and HOPCL–PEG–PCLOH) and their poly(ester-ether-urethanes): synthesis and characterization

  • Báez-García, José Eduardo
  • Marcos-Fernández, Ángel
  • Navarro Crespo, Rodrigo
Ether group (E) diols [HO(CH CH O) H, x = 2, 3, 4, 5, 6, and 8] and polyethylene glycol (PEG) [HO(CH CH O) OH] were used as initiators in the ring-opening polymerization (ROP) of ε-caprolactone (CL) catalyzed by ammonium decamolybdate to synthesize the poly(ε-caprolactone) (PCL) macrodiols such as HOPCL–E–PCLOH and HOPCL–PEG–PCLOH, respectively. The effect of E or PEG on the crystallinity of the PCL segments (x ) in HOPCL–E–PCLOH homopolymer and HOPCL–PEG–PCLOH triblock copolymer was evidenced, respectively, where a weight percent of E or PEG was inversely proportional to the x ; this effect was explained due to that the ether segments are causing a partial disruption on the crystalline domain of PCL. A couple of species of poly(ester–ether–urethanes) (PEU) derived from HOPCL–E–PCLOH and HOPCL–PEG–PCLOH with 1,6-hexamethylene diisocyanate (HDI) were prepared, and these PEU showed an elastomeric behavior. Comparing two samples of PEU prepared from E (MW = 370 g/mol) (PEU ) and PEG (M = 408 g/mol) (PEU ), a parallel profile of their mechanical properties was seen. Eventually, HOPCL–E–PCLOH and HOPCL–PEG–PCLOH species showed similarities in terms of crystallinity and elastomeric behavior from their PEU derivatives. In addition, HOPCL–E–PCLOH and HOPCL–PEG–PCLOH and PEU samples were characterized by H NMR, FT-IR, GPC, DSC, and mechanical properties. Hence, homopolymers and triblock copolymers derived from PCL macrodiols with E or PEG segments, respectively, and their PEU had similarities in terms of chemical structure and physical properties., José E. Báez would like to thank the “Consejo Nacional de Ciencia y Tecnología (CONACYT), Proyecto 284893”, “Dirección de Apoyo a la Investigación y al Posgrado (DAIP) at University of Guanajuato (UG), Proyecto CIIC 103/2018” and “Sistema Nacional de Investigadores (SNI)” in México for the financial support of the work. José E. Báez would also like to thank Ángel Marcos Fernández for believing in these ideas and providing financial support for the reagents through the project MAT2017-87204-R from the Ministry of Economy and Competitiveness (MINECO) of Spain. José E. Báez would like to thank Gema Reina Mendieta and Dr. Rebeca Yasmín Pérez Rodriguez for the acquisition of the NMR spectra and DSC instrument, respectively. Finally, José E. Báez would also like to thank Irene Caso and Sonoko Kawawada for her support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

NEW INSIGHTS IN THE CNT-RUBBER STRUCTURE FOR A RATIONAL DEVELOPMENT OF ADVANCED MATERIALS

  • Valentín, Juan L.
  • Bernal-Ortega, Pilar
  • Bernal, M. Mar
  • González-Jiménez, Antonio
  • Navarro Crespo, Rodrigo
In this work, a systematic characterization of CNT rubber structure has been performed by using a combination of exper i- mental techniques (including advanced 1 H time domain NMR methods) and the last developed analysis procedures (including stress an d strain amplification factors) in order to improve the understanding about the mechanical and viscoelastic properties of these nano composites. According the obtained results, these promising materials could have some li m itations to be applied in high per formance tire tread compounds (mainly related to the rolling resistance and fuel consumption) because of the difficulty of dispersion of CNT in ru b- ber matrices (high filler networking), the strong influence of CNT in the vulcanization process (low cross li nk density and high network defects) and the nature of filler rubber interactions (high energy dissipation associated to the rupture of filler rubber interactions at high strain amplitudes). To overcome th ese issue s , the CNT have been surface modified with oxygen bearing groups and sulfur., The authors thank the financial support provided by the Ministerio de Ciencia e Innovación (MCINN) through the Project MAT2014 52644 R, MAT2017 87204 and an FPI grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insight into structure-property relationships of natural rubber and styrene-butadiene rubber nanocomposites filled with MWCNT

  • Bernal-Ortega, Pilar
  • Bernal, M. Mar
  • González-Jiménez, Antonio
  • Posadas, P.
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
The outstanding properties of carbon nanotubes (CNT) have generated a lot of interest at a scientist and industrial level. CNT have attracted great attention due to their exceptional mechanical, electrical and thermal properties and also for their large aspect ratio, that is, small size and higher surface area. On this regard, CNT-rubber composites have been prepared, using natural rubber (NR) and styrene butadiene rubber (SBR) as matrices, and varying the amount of filler from 0 to 20 phr. In order to understand and optimize the properties of these materials, a fundamental and systematic study has been done with the aim of quantifying the relative contribution of the different factors that determine the reinforcing effect of these nanoparticles. The results obtained from the different characterizations of the composites (study of the electrical and mechanical properties, Payne effect, dynamical mechanical analysis, low field NMR and swelling experiments) reveal a good filler-rubber interaction, a high reinforcement effect, and an increase on the electrical conductivity of the compounds. However, all these improvements are limited by the detrimental effect of the CNT on the vulcanization process., The authors thank Spanish Ministerio de Economia y Competitividad by the financial support of this work (project references MAT2014- 52644-R and MAT2017-87204-R). Pilar Bernal-Ortega thanks the Ministerio de Ciencia e Innovación (Spain) for his FPI contract (ref. BES- 2015-071516). Authors JLV, PP and RN are members of the SusPlast platform from the Spanish National Research Council.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel strategy to polyurethanes with improved mechanical properties by photoactivation of amidocoumarin moieties

  • Navarro Crespo, Rodrigo
  • Seoane-Rivero, Rubén
  • Cuevas, José María
  • Marcos-Fernández, Ángel
An attractive strategy involving photodimerization of a novel amidocoumarin moiety is presented to prepare polyurethane coatings with excellent mechanical properties. Two families of polyurethanes containing these chromophore units into soft or hard segments were easily synthesized by inserting a small fraction of amidocoumarin-diol (5 wt% or 10 wt%). A systematic study has been carried out comparing hard segment, chromophore content and the influence of this amidocoumarin unit within the hard or soft segment. For all synthetized polymers, mechanical properties of the coatings have been evaluated before and after an excitation of the coumarin units with UV light. The results show that the insertion of coumarin into the hard segment leads to a considerable improvement of the mechanical properties after irradiation. Additionally, the photochemical activity of amidocoumarin was studied by UV-Vis and Raman spectroscopies., The authors gratefully acknowledge financial support by the Ministerio de Ciencia e Innovaci´on through the research projects RTC-2016-4887-4, MAT2017-87204-R and RTI2018- 096636-J-100 and by the Basque Government within the framework ELKARTEK through the research projects KK-2018/ 00108 (FRONTIERS IV) and KK-2019/00077 (FRONTIERS V). The authors also thanks to Evonik Industries for the diisocyanate employed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ADVANCED CHARACTERIZATION OF RECYCLED RUBBER FROM END-OF-LIFE TIRES

  • Valentín, Juan L.
  • Pérez-Aparicio, Roberto
  • Fernández-Torres, Alberto
  • Posadas, P.
  • Herrero, R.
  • Martín Salamanca, Fernando
  • Navarro Crespo, Rodrigo
  • Saiz-Rodríguez, L.
There are currently many well-established applications for recycled rubber from end-of-life tires (ELT), but it is essential to investigate and seek new approaches to enhance the value of these products. Recent developments in new technologies and innovative recycling and devulcanization processes have opened up new perspectives for ELT crumb rubber. To promote the use of these products in newly added value applications, it is essential to develop and optimize methods that allow the characterization of parameters related to the ultimate properties of potential final applications. In this respect, a novel characterization methodology based on advanced 1H double-quantum (DQ) nuclear magnetic resonance experiments has been applied for the first time to quantify the key parameters that characterize the structure of ELT crumb rubber after diverse recycling processes: from simple mechanical grinding to complex devulcanization methods. This experimental approach enables the quantification of parameters that define the network structure of rubber, such as the nonelastic network defects (sol fraction, dangling chain ends, loops), the cross-link density, and the heterogeneity of the network, directly from rubber granulate and powder (without any additional sample preparation steps), overcoming most of the drawbacks and uncertainties that limit the application of traditional rubber characterization methods (e.g., equilibrium swelling experiments). By applying this experimental approach, it is possible to identify and quantify the actual technical limits for a complete selective devulcanization process of ELT crumb rubber., The authors gratefully acknowledge the support given by Signus Ecovalor. We also thank Valoriza Medioambiente and Lehigh Technologies Inc. for the supplied crumb rubber samples. Financial support from Ministerio de Econom´ıa y Competitividad (MAT2017-87204-R), Ministerio de Ciencia, Innovacion y Universidades (RTI2018-096636-J-I00), and CSIC ´ (201860E045) is also gratefully acknowledged. Authors J.L.V., A.F.-T., P.P., R.H., F.M.S., and R.N. are members of the SusPlast platform from the Spanish National Research Council (CSIC)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and Synthesis of Bio-Inspired Polyurethane Films with High Performance

  • Briz-López, Eva Marina
  • Navarro Crespo, Rodrigo
  • Martínez-Hernández, Héctor
  • Téllez-Jurado, Lucía
  • Marcos-Fernández, Ángel
In the present work, the synthesis of segmented polyurethanes functionalized with catechol moieties within the hard or the soft segment is presented. For this purpose, a synthetic route of a new catechol diol was designed. The direct insertion of this catechol-free derivative into the rigid phase led to segmented polyurethanes with low performance (¿max ¿ 4.5 MPa). Nevertheless, when the derivative was formally located within the soft segment, the mechanical properties of the corresponding functionalized polyurethane improved considerably (¿max ¿ 16.3 MPa), owing to a significant increase in the degree of polymerization. It is proposed that this difference in reactivity could probably be attributed to a hampering effect of this catecholic ring during the polyaddition reaction. To corroborate this hypothesis, a protection of the aromatic ring was carried out, blocking the hampering effect and avoiding secondary reactions. The polyurethane bearing the protected catechol showed the highest molecular weight and the highest stress at break described to date (¿max ¿ 66.1 MPa) for these kind of catechol-functionalized polyurethanes. Therefore, this new approach allows for the obtention of high-performance polyurethane films and can be applied in different sectors, benefiting from the molecular adhesion introduced by the catechol ring, This research was funded by Spanish Ministry of Science and Innovation (MINECO) through the research projects MAT2017-87204-R, RTI2018-096636-J-100 and by CSIC through the intramural project 20190E004. This work was also funded by CONACyT and DIMM-ESIQIE-IPN through SIP-project 20201294. E.M. Briz-López received finantial support from CONACyT and DIMM-ESIQIE-IPN within Doctor Fellowship (nr. 637147).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of High MolecularWeight Poly(urethane-urea)s Bearing Deactivated Diamines

  • Rubio Hernández-Sampelayo, Alejandra
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
The synthesis of poly(urethane-urea) (PUUs) bearing deactivated diamines within the backbone polymer chain is presented. Several deactivated diamines present interesting properties for several applications in the biomaterial field due to their attractive biocompatibility. Through an activation with Chloro-(trimethyl)silane (Cl-TMS) during the polymerization reaction, the reactivity of these diamines against diisocyanates was triggered, leading to PUUs with high performance. Indeed, through this activation protocol, the obtained molecular weights and mechanical features increased considerably respect to PUUs prepared following the standard conditions. In addition, to demonstrate the feasibility and versatility of this synthetic approach, diisocyanate with different reactivity were also addressed. The experimental work is supported by calculations of the electronic parameters of diisocyanate and diamines, using quantum mechanical methods., This research was funded by Spanish Ministry of Science and Innovation (MINECO) through the research projects MAT2017-87204-R, and RTI2018-096636-J-100 and by CSIC through the intramural project 20190E004
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Properties of polyurethanes derived from poly(diethylene glycol terephthalate)

  • Marcos-Fernández, Ángel
  • Navarro Crespo, Rodrigo
  • Benito, Esperanza
  • Guzmán, Julio
  • Garrido, Leoncio
The synthesis of linear and crosslinked polyurethanes based on ¿,¿-dihydroxypolydiethylene glycol terephthalate (PDET) is described. Prior to the preparation of these materials, a PDET polymer was obtained by conventional condensation reaction between dimethyl terephthalate and diethylene glycol, and a well-characterized fraction of PDET with number average molecular weight of 3,650 g mol-1 was chosen for the synthesis of the polyurethanes. Specifically, three polyurethanes were prepared: a pure linear polyurethane by reaction of PDET with 4,4¿ -diphenylmethane diisocyanate (MDI), a chain extended polyurethane obtained with MDI, PDET and 1,4-butanediol as chain extender, and a crosslinked polyurethane synthesized from PDET and a polyfunctional isocyanate. Thermal, mechanical, dielectric and gas transport properties of the polyurethanes were studied, showing excellent performance. In particular, rubber-like flexible materials were obtained with elongation values over 1000%, due to the low glass transition temperature of PDET. Furthermore, it was observed that these materials, in particular the crosslinked polyurethane, behave as gas barriers., The authors acknowledge the financial support of the Ministry of Economy and Competitiveness (MINECO) grants MAT2017-87204-R and RTI2018-096636-J-100 and Consejo Superior de Investigaciones Científicas (CSIC) grant 201960E004.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Printing of Thermoplastic Elastomers: Role of the Chemical Composition and Printing Parameters in the Production of Parts with Controlled Energy Absorption and Damping Capacity

  • León-Calero, Marina
  • Reyburn Valés, Sara Catherine
  • Marcos-Fernández, Ángel
  • Rodríguez-Hernández, Juan
Additive manufacturing (AM) is a disruptive technology that enables one to manufacture complex structures reducing both time and manufacturing cost. Among the materials commonly used for AM, thermoplastic elastomers (TPE) are of high interest due to their energy absorption capacity, energy efficiency, cushion factor or damping capacity. Previous investigations have exclusively focused on the optimization of the printing parameters of commercial TPE filaments and the structures to analyse the mechanical properties of the 3D printed parts. In the present paper, the chemical, thermal and mechanical properties for a wide range of commercial thermoplastic polyurethanes (TPU) filaments were investigated. For this purpose, TGA, DSC, 1H-NMR and filament tensile strength experiments were carried out in order to determine the materials characteristics. In addition, compression tests have been carried out to tailor the mechanical properties depending on the 3D printing parameters such as: infill density (10, 20, 50, 80 and 100%) and infill pattern (gyroid, honeycomb and grid). The compression tests were also employed to calculate the specific energy absorption (SEA) and specific damping capacity (SDC) of the materials in order to establish the role of the chemical composition and the geometrical characteristics (infill density and type of infill pattern) on the final properties of the printed part. As a result, optimal SEA and SDC performances were obtained for a honeycomb pattern at a 50% of infill density., This research was funded by Spanish Ministry of Science and Innovation (MINECO) through the research projects MAT2017-87204-R, by CSIC through the intramural project 20190E004 and by Comunidad de Madrid through the Industrial Doctorate program (IND2018/IND-9503)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Free radical nanocopolymerization in AAO porous materials: Kinetic, copolymer composition and monomer reactivity ratios

  • León-Boigues, Laia
  • Navarro Crespo, Rodrigo
  • Mijangos, Carmen
Free radical (FR) polymerization in non-interconnected nanochannels of anodic aluminum oxide templates (AAO) represents a suitable and less energetic method to prepare supported hierarchical polymer nanostructures when compared to the main alternative which is through polymer melt infiltration. Nevertheless, FR copolymerization has not been studied in the nanoscopic templates even if it is of great interest to produce a wide variety of polymeric materials with modulated properties. In this work, we explore the ability to copolymerize butyl methacrylate (BMA) and 2-hydroxyethyl acrylate (HEA) monomers in lab-made Anodic Aluminum Oxide (AAO) nanoreactors. Thus, P(BMA/HEA) copolymer has been successfully synthesized to a 100% conversion degree within AAO geometries at relatively low temperatures in ~90 min. The reaction of copolymerization in confinement showed faster polymerization rates than bulk copolymerization. H NMR allowed to follow monomer conversion in the AAO nanoreactor for a wide range of monomer compositions, from 0 to 100% whereas differential scanning calorimetry (DSC) was employed to quickly observe the overall kinetics of the copolymerization reaction. At conversion degrees <20%, the reactivity ratios of BMA and HEA monomers was determined and this was related to the distribution of the monomers on the P(BMA/HEA) copolymer synthesized in confinement and bulk. HEA is the most reactive monomer in the copolymerization reaction in confinement and in bulk, however, in the restricted geometry of AAO template, the reactivity ratios shift slightly away from the preferential incorporation of HEA. Finally, SEM images of P(BMA/HEA) copolymer nanofibers extracted from the AAO nanoreactor showed an homogeneous and ordered nanostructured morphology. Since copolymer nanostructures are composed of monomers that combine interesting softening properties with a high swelling capacity, the nanostructured copolymer could be of special interest to surface science studies and specifically for coatings applications., The funding for this research effort comes primarily from MAT2017- 83014-C2-2-P, MAT2017-87204-R and RTI2018-096636-J-100 (Minis- terio de Ciencia e Innovaci ́on, Spain), Supporting with FPI grant (BES- 2015-074403) to develop a PhD thesis
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Creación de un marco físico unificado para la caracterización avanzada de compuestos de caucho

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Valentín, Juan L.
Este trabajo permitió desarrollar un único marco teórico físico bajo el cual es posible caracterizar de forma cuantitativa todos los parámetros que conforman la estructura de red de los compuestos de caucho. Mediante la combinación de diferentes técnicas experimentales que arrojan resultados autoconsistentes se puede enriquecer la caracterización sin que por ello la metodología de análisis o los equipos necesarios para realizar los experimentos sean muy diferentes a los que se están utilizando actualmente en la industria del caucho. Esta teoría permite caracterizar la estructura molecular de compuestos simples, cargados y neumáticos al final de su vida útil, considerando en cada caso los diferentes efectos que intervienen en las variaciones de los parámetros moleculares., Los autores agradecen a la Revista de Plás- ticos Modernos la oportunidad de compartir el proyecto, al Grupo Elastómeros y al Minis- terio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Cien- cia e Innovación (PID2020-119047RB-I00, PLEC2021-007793 y MAT2017-87204-R), CSIC (201860E045) y a la Convocatoria de Garantía Juvenil CAM2019 por la financiación. El grupo de Elastómeros pertenece a SUS- PLAST, plataforma interdisciplinar del CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical upcycling of poly(ethylene terephthalate) waste: Moving to a circular model

  • Dios Caputto, María Dolores de
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
  • Marcos-Fernández, Ángel
The circular economy is a path that society, governments, and business mustadopt to develop a viable and sustainable model for plastic production. Follow-ing the route guided by the United Nations and the new laws of the EuropeanUnion, such as the Green Deal, it will be able to put an end to the great problemof this era, the inadequate treatment and management of plastic waste. On theplastics production ladder, poly(ethylene terephthalate) (PET) ranks fifth along-side polyurethanes, but only an average of 17% of total PET waste is recycled.Moreover, according to the latest survey made by Zero Waste Europe, most ofthis recycling source is used in low features applications through a downcyclingprocess. There are mainly two ways for PET recycling, it can be done mechani-cally or chemically. On the one hand, mechanical recycling is easy to employbut presents some limitations as the properties of the final product decreasefrom the second cycle, whereas chemical recycling offers versatile proceduresalthough it requires huge amounts of investment money. To address these draw-backs, diverse chemical recycling methods, specially aminolysis and glycolysis,were proposed as the promising way to obtain high added-value products. Inthis review, different updated state of the art works about recycling of PET werediscussed, presenting the two forms for recycling PET waste, mechanical andchemical approach, and the reason of why is important to focus on theobtention of high-added value products in an upcycling process., Consejo Superior de Investigaciones Científicas, Grant/Award Number: 20190E004; Ministerio de Ciencia, Innovación y Universidades, Grant/Award Numbers: MAT2017-87204-R, RTI2018-096636-J-100, PID2020-119047RB-I00, PLEC2021-007793
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reutilización sostenible del caucho de NFVU para la fabricación de neumáticos macizos

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Dios Caputto, María Dolores de
  • Rubio Hernández-Sampelayo, Alejandra
  • Diñeiro García, Laura
  • Estebaranz Pozo, S.
  • Fernández Torres, Alberto
  • Herrero, R.
  • Bonifacio, Horacio W.
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
El polvo de neumático al final de su vida útil (NFVU) puede utilizarse como aditivo en la fabricación de nuevos neumáticos, para lo cual hay que corregir las formulaciones tradicionales utilizadas. En este trabajo se incluyó una fracción de polvo de NFVU en la banda de rodadura y en el relleno de neumáticos macizos, que son un tipo de neumático especialmente diseñado para evitar pinchazos y que tengan una alta durabilidad. Los nuevos compuestos se caracterizaron mediante pruebas de tracción uniaxial para obtener las propiedades mecánicas mediante técnicas de caracterización avanzada de, RMN de bajo campo en el dominio del tiempo, para estudiar la cinética de reacción del relleno elastomérico, concluyendo el registro de la patente de estos materiales para su posterior explotación., End of life tires powder (ELTp) might be used as an additive in the manufacture of new ti- res, for which traditional recipes must be co- rrected. In this work, it was included a frac- tion of ELTp in tread compound recipe and in the cushion compound for solid tires, tho- se are a type of tire specifically designed to avoid punctures and high endurance. New compounds were characterized by uniaxial strain tests to obtain mechanical pro- perties and an advanced characterization te- chnique low-field NMR in time domain to stu- dy reaction kinetics for cushion compound, concluding with the registration of a patent of those materials for later use., Los autores agradecen al RTI2018- 096636-J-100,Ministerio de Cien- cia e Innovación (MINECO) la financiación de los proyectos MAT2017-87204-R, PID2020-119047RB-I00 y PLEC2021-007793, así como al CSIC a través del proyecto intramural 20190E004. Agra- decen también al Gobierno de Aragón la fi- nanciación por el proyecto EC-22-2021. FMS agradece a la Convocatoria de Garantía Juve- nil CAM2019 por la financiación. El grupo de Elastómeros pertenece a SUSPLAST, platafor- ma interdisciplinar del CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable and Biocompatible Thermoplastic Poly(Ester-Urethane)s Based on Poly(ε-Caprolactone) and Novel 1,3-Propanediol Bis(4-Isocyanatobenzoate) Diisocyanate: Synthesis and Characterization

  • Rubio Hernández-Sampelayo, Alejandra
  • Navarro Crespo, Rodrigo
  • González-García, Dulce M.
  • García-Fernández, Luis
  • Ramírez-Jiménez, Rosa Ana
  • Aguilar, María Rosa
  • Marcos-Fernández, Ángel
A series of non-toxic biodegradable and biocompatible polyurethanes bearing p-aminobenzoate moieties are presented. The introduction of this attractive motif was carried out by the synthesis of a novel isocyanate. These biodegradable polymers were chemically and physically characterized by several techniques and methods including bioassay and water uptake measurements. The molecular weight of the soft segment (poly-ε-caprolactone, PCL) and hard segment crystallinity dictated the mechanical behavior and water uptake. The behavior of short PCL-based polyurethanes was elastomeric, whilst increasing the molecular weight of the soft segment led to plastic polyurethanes. Water uptake was hindered for long PCL due to the crystallization of the soft segment within the polyurethane matrix. Furthermore, two different types of chain extender, hydrolyzable and non-hydrolyzable, were also evaluated: polyurethanes based on hydrolyzable chain extenders reached higher molecular weights, thus leading to a better performance than their unhydrolyzable counterparts. The good cell adhesion and cytotoxicity results demonstrated the cell viability of human osteoblasts on the surfaces of these non-toxic biodegradable polyurethanes., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) through the research projects MAT2017-87204-R, RTI2018-096636-J-100, PID2020-119047RB-I00, PID2020-114086RB-100 and PLEC2021-007793, CIBER-BBN (Instituto de Salud Carlos III, Spain) and by CSIC through the intramural project 20190E00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micronized Recycle Rubber Particles Modified Multifunctional Polymer Composites: Application to Ultrasonic Materials Engineering

  • Genovés, Vicente
  • Fariñas, María Dolores
  • Pérez-Aparicio, Roberto
  • Saiz-Rodríguez, L.
  • Valentín, Juan L.
  • Álvarez-Arenas, Tomás G.
There is a growing interest in multifunctional composites and in the identification of novel applications for recycled materials. In this work, the design and fabrication of multiple particle-loaded polymer composites, including micronized rubber from end-of-life tires, is studied. The integration of these composites as part of ultrasonic transducers can further expand the functionality of the piezoelectric material in the transducer in terms of sensitivity, bandwidth, ringing and axial resolution and help to facilitate the fabrication and use of phantoms for echography. The adopted approach is a multiphase and multiscale one, based on a polymeric matrix with a load of recycled rubber and tungsten powders. A fabrication procedure, compatible with transducer manufacturing, is proposed and successfully used. We also proposed a modelling approach to calculate the complex elastic modulus, the ultrasonic damping and to evaluate the relative influence of particle scattering. It is concluded that it is possible to obtain materials with acoustic impedance in the range 2.35–15.6 MRayl, ultrasound velocity in the range 790–2570 m/s, attenuation at 3 MHz, from 0.96 up to 27 dB/mm with a variation of the attenuation with the frequency following a power law with exponent in the range 1.2–3.2. These ranges of values permit us to obtain most of the material properties demanded in ultrasonic engineering., This research was funded by Ministerio de Economía y Competitividad (DPI2016-78876-R and MAT2017-87204-R), CSIC (201860E045) and Signus Ecovalor, S.L. Author J.L.V. is member of the SusPlast platform of CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Introducing MEW2 Software: A Tool to Analyze MQ-NMR Experiments for Elastomers

  • Salamanca, F. M.
  • Zepeda Rodríguez, Z.
  • Diñeiro García, Laura
  • Montero Escrivá, Marina
  • Herrero, Rebeca
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
Low-field time-domain proton Nuclear Magnetic Resonance (NMR) spectroscopy is an attractive and powerful tool for studying the structure and dynamics of elastomers. The existence of crosslinks and other topological constraints in rubber matrices (entanglements and filler¿rubber interactions, among others) renders the fast segmental fluctuations of the polymeric chains non-isotropic, obtaining nonzero residual dipolar couplings, which is the main observable of MQ-NMR experiments. A new software, Multiple quantum nuclear magnetic resonance analyzer for Elastomeric Networks v2 (MEW2), provides a new tool to facilitate the study of the molecular structure of elastomeric materials. This program quantitatively analyzes two different sets of experimental data obtained in the same experiment, which are dominated by multiple-quantum coherence and polymer dynamics. The proper quantification of non-coupled network defects (dangling chain ends, loops, etc.) allows the analyzer to normalize the multiple quantum intensity, obtaining a build-up curve that contains the structural information without any influence from the rubber dynamics. Finally, it provides the spatial distribution of crosslinks using a fast Tikhonov regularization process based on a statistical criterion. As a general trend, this study provides an automatic solution to a tedious procedure of analysis, demonstrating a new tool that accelerates the calculations of network structure using 1H MQ-NMR low-field time-domain experiments for elastomeric compounds., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) under grants MAT2017-87204-R, PID2020-119047RB-I00, and PLEC2021-00779, Peer reviewed