Pasar al contenido principal

NUEVOS RECUBRIMIENTOS DE POLIURETANOS AUTO-REPARABLES PARA PIEZAS DE AUTOMOCION

RTI2018-096636-J-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

General approach to prepare polymers bearing pendant isocyanate groups

  • Navarro Crespo, Rodrigo
  • García Sánchez, Carolina
  • Rodríguez-Hernández, Juan
  • Elvira, Carlos
  • Marcos-Fernández, Ángel
  • Gallardo Ruiz, Alberto
  • Reinecke, Helmut
A versatile synthetic approach for the easy preparation, under smooth reaction conditions, of diverse classes of linear polymers bearing aliphatic or aromatic isocyanate groups in the side chains is described. The procedure consists in the transformation of primary amine groups present in the polymer into isocyanates using equimolar amounts of diphosgene or triphosgene and a soluble tertiary amine as the acid scavenger. The transformation of all amine groups takes place quasi-simultaneously and instantaneously as shown by the invariability of the chain length of the polymer and the absence of crosslinked products. The number of isocyanate groups per molecule that can be achieved by this approach corresponds to the number of primary amine groups of the starting polymer and is up to three orders of magnitude higher than in any other non-crosslinked molecule described so far. The isocyanate functionalized polymers can be used to anchor a large variety of molecules to the polymer chains. The approach is in detail demonstrated with poly(vinyl chloride) (PVC) carrying aromatic amine groups but has also been confirmed by using a number of other polymer types bearing both aromatic and aliphatic primary amines. Furthermore, it has been used to prepare a novel low molecular weight compound, tris(2-cyanatoethyl)amine., The authors gratefully acknowledge support from Grants MAT2013-42957-R, and RTI2018-096636-J-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ADVANCED CHARACTERIZATION OF RECYCLED RUBBER FROM END-OF-LIFE TIRES

  • Valentín, Juan L.
  • Pérez-Aparicio, Roberto
  • Fernández-Torres, Alberto
  • Posadas, P.
  • Herrero, R.
  • Martín Salamanca, Fernando
  • Navarro Crespo, Rodrigo
  • Saiz-Rodríguez, L.
There are currently many well-established applications for recycled rubber from end-of-life tires (ELT), but it is essential to investigate and seek new approaches to enhance the value of these products. Recent developments in new technologies and innovative recycling and devulcanization processes have opened up new perspectives for ELT crumb rubber. To promote the use of these products in newly added value applications, it is essential to develop and optimize methods that allow the characterization of parameters related to the ultimate properties of potential final applications. In this respect, a novel characterization methodology based on advanced 1H double-quantum (DQ) nuclear magnetic resonance experiments has been applied for the first time to quantify the key parameters that characterize the structure of ELT crumb rubber after diverse recycling processes: from simple mechanical grinding to complex devulcanization methods. This experimental approach enables the quantification of parameters that define the network structure of rubber, such as the nonelastic network defects (sol fraction, dangling chain ends, loops), the cross-link density, and the heterogeneity of the network, directly from rubber granulate and powder (without any additional sample preparation steps), overcoming most of the drawbacks and uncertainties that limit the application of traditional rubber characterization methods (e.g., equilibrium swelling experiments). By applying this experimental approach, it is possible to identify and quantify the actual technical limits for a complete selective devulcanization process of ELT crumb rubber., The authors gratefully acknowledge the support given by Signus Ecovalor. We also thank Valoriza Medioambiente and Lehigh Technologies Inc. for the supplied crumb rubber samples. Financial support from Ministerio de Econom´ıa y Competitividad (MAT2017-87204-R), Ministerio de Ciencia, Innovacion y Universidades (RTI2018-096636-J-I00), and CSIC ´ (201860E045) is also gratefully acknowledged. Authors J.L.V., A.F.-T., P.P., R.H., F.M.S., and R.N. are members of the SusPlast platform from the Spanish National Research Council (CSIC)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Guía de empleo del caucho reciclado procedente del neumático

  • Saiz Rodriguez, Leticia
  • Pérez Aparicio, R.
  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Valentín, Juan L.
  • Herrero, Rebeca
  • Fernández Torres, Alberto
  • Dios Caputto, María Dolores de
  • Estebaranz Pozo, S.
  • Navarro Crespo, Rodrigo
En este trabajo se detalla el contenido y alcance de una guía para la aplicación del caucho reciclado procedente de neumáticos al final de su vida útil (NFVU). Para ello, se empleó caucho de NFVU para la elaboración de compuestos de caucho sinterizado, además de la incorporación y formulación de polvo de caucho como nuevo ingrediente en matrices elastoméricas vírgenes. Se realizaron estudios sobre el efecto del contenido y tamaño de partícula de polvo de caucho de NFVU y su influencia sobre el proceso de vulcanización, propiedades mecánicas, envejecimiento y degradación de los compuestos de caucho en los que se empleó. Los resultados presentados en esta guía serán de gran utilidad para los especialistas de la industria del caucho, dando así una solución a un problema ambiental, además de afianzar al caucho de NFVU como una materia prima secundaria de valor añadido, lo cual permitirá su uso en la fabricación de piezas de caucho de alto valor tecnológico contribuyendo a la economía circular y la sostenibilidad de este sector esencial., Los autores agradecen el soporte ofrecido por SIGNUS ECOVALOR, así como a Valoriza Medioambiente, Lehigh Technologies Inc. y Tyre Recycling Solutions por las muestras de caucho reciclado. Agradecimiento por la finan- ciación al Ministerio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Mi- nisterio de Ciencia e Innovación (PID2020- 119047RB-I00 y PLEC2021-007793) y CSIC (201860E045). El grupo de Elastómeros per- tenece a SUSPLAST, plataforma interdiscipli- nar del CSIC. Se agradece al consejo nacional de ciencia y tecnología (CONACYT-México) la beca posdoctoral brindada para el desarrollo de los proyectos.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Creación de un marco físico unificado para la caracterización avanzada de compuestos de caucho

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Valentín, Juan L.
Este trabajo permitió desarrollar un único marco teórico físico bajo el cual es posible caracterizar de forma cuantitativa todos los parámetros que conforman la estructura de red de los compuestos de caucho. Mediante la combinación de diferentes técnicas experimentales que arrojan resultados autoconsistentes se puede enriquecer la caracterización sin que por ello la metodología de análisis o los equipos necesarios para realizar los experimentos sean muy diferentes a los que se están utilizando actualmente en la industria del caucho. Esta teoría permite caracterizar la estructura molecular de compuestos simples, cargados y neumáticos al final de su vida útil, considerando en cada caso los diferentes efectos que intervienen en las variaciones de los parámetros moleculares., Los autores agradecen a la Revista de Plás- ticos Modernos la oportunidad de compartir el proyecto, al Grupo Elastómeros y al Minis- terio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Cien- cia e Innovación (PID2020-119047RB-I00, PLEC2021-007793 y MAT2017-87204-R), CSIC (201860E045) y a la Convocatoria de Garantía Juvenil CAM2019 por la financiación. El grupo de Elastómeros pertenece a SUS- PLAST, plataforma interdisciplinar del CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Devulcanization methods and advanced characterization of recycled rubber from end-of-life tires

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Valentín, Juan L.
  • Estebaranz Pozo, S.
  • Fernández Torres, Alberto
  • Herrero, Rebeca
  • Navarro Crespo, Rodrigo
Tires are complex products that reach high technical requirements in terms of security, durability and many other factors. Devulcanization is a proven and efficient method to enhance circularity in the useful life cycle of tires. It consists in the breakage of the polymeric chains to recover a new material that can be used for other applications. There are two big groups of devulcanization methods: those that produce random scission and those that produce only the sulfidic-bond scission (selective devulcanization). In this work many of these methods are studied: selective devulcanization using thiol-amine treatment, thermo-mechanical devulcanization and microwave heating devulcanization. The final compounds are characterized, obtaining the spatial distribution of crosslinks after each treatment. This characterization was carried out on all the specimens by experiments of double quantum nuclear magnetic resonance (1H DQ-NMR), from this technique quantitative advanced characterization of the elastomeric network was obtained, as well as the amount of network defects, entanglements, and crosslink densities. Thus, it was possible to determine the effect of the devulcanization treatment on the samples studied. The samples of end-of-life tire powder (ELTp) devulcanized show a lower average value of residual dipolar coupling due to the breakage of crosslinks (selective treatments) and the polymeric chains (random scission treatments)., Authors gratefully acknowledge the support given by Ministerio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Ciencia e Innovación (PID2020119047RB-I00 and PLEC2021-007793 and CSIC (201860E045). FMS acknowledge Ministerio de Ciencia e Innovación (CAM19_AI_ICTP_002). Elastomers group is part of the SusPlast platform, the interdisciplinary platform from the Spanish National Research Council (CSIC). ZZR acknowledge Consejo Nacional de Ciencia y Tecnología de México (CONACYT – México) for the postdoctoral grant given for the development of these project
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced characterization of rubber compounds using a combination of experimental techniques

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • González-Jiménez, Antonio
  • Herrero, R.
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
Elasticity in rubber materials depends on different molecular parameters that define the network structure. Crosslinks and entanglements have an effect that is already considered in different ways in the diverse rubber elasticity theories. Different experimental approaches to characterize those parameters are mechanical tests, swelling experiments and more recently double quantum nuclear magnetic resonance (1H DQ-NMR). The analysis of those experiments is based on different assumptions and theoretical approaches, reducing the consistence of the so-obtained results. The main purpose of this work is to unify for the first time those approaches in order to work under just one physical framework as independent as possible from the experiments. This will lead us to a new methodology for the analysis that allows to combine those experimental techniques for a better quantification of structural parameters as crosslink and entanglement density. Moreover, it could set the effect of other important parameters as network defects (dangling chain ends and loops) and spatial distribution of crosslinks (not considered in the rubber elasticity theories) in the physical properties of rubber materials., Authors gratefully acknowledge the support given by Ministerio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Ciencia e Innovación (PID2020119047RB-I00 and PLEC2021-007793 and CSIC (201860E045). FMS acknowledge Ministerio de Ciencia e Innovación (CAM19_AI_ICTP_002). Elastomers group is part of the SusPlast platform, the interdisciplinary platform from the Spanish National Research Council (CSIC). ZZR acknowledge Consejo Nacional de Ciencia y Tecnología de México (CONACYT – México) for the postdoctoral grant given for the development of these projects
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reutilización sostenible del caucho de NFVU para la fabricación de neumáticos macizos

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Dios Caputto, María Dolores de
  • Rubio Hernández-Sampelayo, Alejandra
  • Diñeiro García, Laura
  • Estebaranz Pozo, S.
  • Fernández Torres, Alberto
  • Herrero, R.
  • Bonifacio, Horacio W.
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
El polvo de neumático al final de su vida útil (NFVU) puede utilizarse como aditivo en la fabricación de nuevos neumáticos, para lo cual hay que corregir las formulaciones tradicionales utilizadas. En este trabajo se incluyó una fracción de polvo de NFVU en la banda de rodadura y en el relleno de neumáticos macizos, que son un tipo de neumático especialmente diseñado para evitar pinchazos y que tengan una alta durabilidad. Los nuevos compuestos se caracterizaron mediante pruebas de tracción uniaxial para obtener las propiedades mecánicas mediante técnicas de caracterización avanzada de, RMN de bajo campo en el dominio del tiempo, para estudiar la cinética de reacción del relleno elastomérico, concluyendo el registro de la patente de estos materiales para su posterior explotación., End of life tires powder (ELTp) might be used as an additive in the manufacture of new ti- res, for which traditional recipes must be co- rrected. In this work, it was included a frac- tion of ELTp in tread compound recipe and in the cushion compound for solid tires, tho- se are a type of tire specifically designed to avoid punctures and high endurance. New compounds were characterized by uniaxial strain tests to obtain mechanical pro- perties and an advanced characterization te- chnique low-field NMR in time domain to stu- dy reaction kinetics for cushion compound, concluding with the registration of a patent of those materials for later use., Los autores agradecen al RTI2018- 096636-J-100,Ministerio de Cien- cia e Innovación (MINECO) la financiación de los proyectos MAT2017-87204-R, PID2020-119047RB-I00 y PLEC2021-007793, así como al CSIC a través del proyecto intramural 20190E004. Agra- decen también al Gobierno de Aragón la fi- nanciación por el proyecto EC-22-2021. FMS agradece a la Convocatoria de Garantía Juve- nil CAM2019 por la financiación. El grupo de Elastómeros pertenece a SUSPLAST, platafor- ma interdisciplinar del CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metodologías de valorización de neumáticos al final de su vida útil

  • Zepeda Rodríguez, Z.
  • Martín Salamanca, Fernando
  • Estebaranz Pozo, S.
  • Valentín, Juan L.
  • Navarro Crespo, Rodrigo
Los neumáticos al final de su vida útil (NFVU), son un elemento fundamental de la sociedad, debido a sus aplicaciones en diversos sectores industriales y de la vida cotidiana. Sin embargo, al ser piezas que se fabrican pensando en su durabilidad y exigencia en sus prestaciones, su manejo como desecho una vez que alcanzan el final de su vida es bastante complicado y diferente en comparación con otros polímeros. Los NFVU representan un riesgo ambiental y sanitario, pero, mediante diferentes métodos y técnicas de valorización se pueden reutilizar como neumáticos de segundo uso, recuperarse como materias primas de alto valor añadido para la fabricación de nuevas piezas, o bien transformarse en energía para alimentar procesos industriales. Es por ello que se requiere tener y ampliar el conocimiento de los diversos enfoques y estrategias para poder lograr un adecuado manejo de los NFVU, y ser capaces de recuperar lo que estos nos brindan, donde los modelos de gestión adoptados por cada país juegan un papel importante., End-of-life tires (ELT) are a fundamental part of society, due to their applications in various industrial sectors and day-to-day life. However, as they are manufactured with durability and performance requirements in mind, their management as waste once they reach the end of their life is quite complicated and different compared to other polymers. ELTs represent an environmental and sanitary risk, but through different valorization methods and techniques they can be reutilized as second-use tires, be recovered as raw materials with high added value for the manufacture of new parts or be transformed into energy to feed industrial processes. That is, therefore, it is necessary to have and extend the knowledge of the different approaches and strategies to be able to achieve an appropriate management of the ELTs and to be able to recover what they provide us, where the management models adopted by each country play an important role, Agradecimiento por la financiación al Minis- terio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Cien- cia e Innovación (PID2020119047RB-I00 y PLEC2021-007793) y CSIC (201860E045). El grupo de Elastómeros pertenece a SUS- PLAST, plataforma interdisciplinar del CSIC. Se agradece al Consejo Nacional de Ciencia y Tecnología (CONACYT-México) por la beca posdoctoral otorgada a ZZR para el desarrollo de los proyectos
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structure properties of recycled rubber compounds from end-of-life tires

  • Zepeda Rodríguez, Z.
  • Martín Salamanca, Fernando
  • Valentín, Juan L.
  • Herrero, R.
  • Fernández Torres, A.
  • Navarro Crespo, Rodrigo
Devulcanization is a step forward in the recycling of end-of-life rubber powder (ELTp) through the breaking of the cross-linking structure present in rubber by thermo-mechanical, chemical, ultrasound, microwave, and biological treatments to obtain materials with the capacity to be reprocessed and revulcanized. Although all processes have their advantages and disadvantages, currently thermo-mechanical processes are the most advanced approach to be exploited on an industrial scale because they allow the continuous use of the synergy between thermal energy and high shear forces to break the sulphur bonds formed during vulcanization while trying to reduce the chain scission and degradation processes. Despite the developments achieved and the efforts made in recent years in this field, the ELTp rubber devulcanization processes have not increased the scientific-technical progress necessary to reach the degree of devulcanization and selectivity (ratio between crosslinking breakage and chain cleavage) required to be applied to increase rubber content in products with demanding technical requirements and high added value [4]. The main reasons for this scenario can be identified and grouped into three different levels: i) deficiencies in structural characterization, ii) difficulties in the devulcanization processes, and iii) deficiencies in the revulcanization process. Therefore, the main objective of this work is to optimize the devulcanization processes by characterizing the structural variations produced throughout the recycling process and thus establish the relationship between the processing parameters and the structure of the devulcanized material, it is necessary to achieve high levels of quality (high degree of devulcanization combined with high selectivity). For this purpose, double quantum coherence nuclear magnetic resonance (1H DQ-NMR) will be used on ELTp devulcanized by a thermo-mechanical process., Authors gratefully acknowledge the support given by Ministerio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Ciencia e Innovación (PID2020119047RB- I00 and PLEC2021-007793 and CSIC (201860E045). FMS acknowledge Ministerio de Ciencia e Innovación (CAM19_AI_ICTP_002). Elastomers group is part of the SusPlast platform, the interdisciplinary platform from the Spanish National Research Council (CSIC). ZZR acknowledge Consejo Nacional de Ciencia y Tecnología de México (CONACYT – México) for the postdoctoral grant given for the development of these projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toughening of Immiscible rPS/SAN Blends by SEBS Elastomers: Properties and Morphology

  • Bedjaoui, K.
  • Navarro Crespo, Rodrigo
  • Krache, R.
  • Valentín, Juan L.
  • Herrero Calderon, Rebeca
  • Fernández, Alberto
  • Marcos-Fernández, Ángel
In this research, an attempt was made to improve compatibility in a polymer blend composed of incompatible constituents, namely, recycled polystyrene (rPS) and polystyrene-co-acrylonitrile (SAN), through the addition of a compatibilizer. The compatibilizing agent, styrene-ethylenebutadienestyrene block copolymer (SEBS), was added to the polymer blend in ratios of 5 and 10 wt%. For this purpose, blends of rPS and SAN at different ratios, without and with varying concentrations of compatibilizer, were prepared by melt blending using a co-rotating twin-screwextruder. Mechanical properties including tensile and impact strength, rheological properties (RPA), thermal behaviour (DSC) and morphological characteristics (SEM) were evaluated. According to the results obtained by complex viscosity, the blends behave as a pseudoplastic fluid. The results showed that the addition of SEBS increased the Izod impact strength and the elongation at break and decreased the tensile strength and tensile modulus. rPS/SAN blend modified with SEBS had better mechanical properties than the rPS/SAN alloy. SEM photographs revealed that the SEBS was not only distributed in the SAN phase but also distributed in rPS phase in rPS/SAN/SEBS blend. Furthermore, DSC analysis for blends of rPS/SAN gave a good indication of the improvement on miscibility for most compositions. SEM micrographs of tensile fracture surfaces indicated that the formation of the co-continuous phase and the improvement of interface adhesion are the most important reasons for the excellent tensile properties of the rPS/SAN/SEBS blends. Within the range of analysed compositions, the morphologies investigated by SEM are typical of immiscible blends., K.B. would like to thank Dr Maria del Pilar Posadas Bernal, Dr Patricia Sampe- droTejedor and Grupo de Elastomeros for their help in hosting him as a doctoral student to carry out the experimental part of his PhD thesis at the Elastomeros laboratory, Instituto de Ciencia y Tecnologia de Polimeros (ICTP-CSIC) Madrid, Spain. This research was funded by Spanish Ministry of Science and Innovation (MINECO) through the research projects RTI2018-096636-J-100 and PID2020- 119047RB-100., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Synthesis of Polyurethanes as high-added value products from Chemical Upcycling of PET waste

  • Dios Caputto, María Dolores de
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Rubio Hernández-Sampelayo, Alejandra
According to the new regulation of the European Union based on the Sustainable Development Goals, all packaging introduced in Europe must be reusable and recyclable to comply with the 2030 agenda [1]. In this regard, a sustainable treatment and management of plastic waste must be developed, moving from a linear production procedure to a circular model [2]. The Poly(ethylene terephthalate) (PET) is the fourth polymer more produced in the world, quadrupling the production over 74 million tonnes between 2017-2021. Unfortunately, only 19% of PET is properly recycled, with a recovery rate of 31% for bottles. For that reason, PET is a material that must be recycled [3]. Mechanical recycling of PET involves the loss of product properties compared to pristine PET and, after the second cycle, the properties decrease notably [4]. The chemical recycling approach presents versatile procedures and the possibility to obtain high-added value products, such as polyurethanes (PUs). Currently, chemical recycling methods require drastic reaction conditions (high temperatures, pressures, etc.) which increases the final price of the product, leading to their exclusion from the recycling cycle and the loss of valuable product [5]. Therefore, the aim of this proposal is the chemical upcycling of PET under milder reaction conditions using different basic catalysts, starting from grinded PET or bis(2-hydroxyethyl) terephthalate (BHET) from PET glycolysis, to obtain polyols, and subsequently, to use these polyols in the synthesis of polyurethanes as a high-added value product from that recycling material [6]., The authors acknowledge the financial support of the Ministry of Science and Innovation RTI2018-096636-J-100, PID2020-119047RB-I00, and RTC2019-007287-2, and MDDC thanks the Spanish National Research Council for grant JAEINT_20_00798.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of gamma irradiation on the physical properties of poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA)

  • Pérez-Valdez, C.
  • Burillo, G.
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
PBS and PBSA were irradiated with gamma up to a 400 kGy dose. Gel content appeared at approximately 100 kGy dose with a higher gel content for PBSA. Charlesby-Pinner analysis indicated that chains scission predominated over crosslinking. Dispersity was increased by branching, that increased molecular weight until gelation, and by chain scission that decreased molecular weight. Careful analysis of the chemical structure by NMR showed that new species appeared with irradiation and some species increased whereas other decreased with the increase in dose. The same species were present in PBS and PBSA and the same variation in species took place in both polymers. From NMR results a mechanism for PBS and PBSA chain scission was proposed. Thermal properties were affected by irradiation, especially crystallization temperature, that decreased significantly with the increase in dose. Mechanical properties were strongly decreased by irradiation and both polymers became fragile at relatively low doses., This work was supported by projects PID2020-119047RB-I00 and RTI2018-096636-J100, financed by spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelado matemático y simulación numérica en elastómeros: estado del arte

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Diñeiro García, Laura
  • Montero Escrivá, Marina
  • Herrero, Rebeca
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
La simulación en elastómeros es un recurso vital en la investigación y desarrollo de materiales, proporcionando herramientas para modelar y predecir el comportamiento de elastómeros en diversas condiciones. Esto acelera el desarrollo de nuevos materiales y optimiza los existentes, reduciendo costes y tiempo. La simulación es esencial en la optimización de la vulcanización y en la modelación de geometrías complejas, como los patrones de banda de rodadura de los neumáticos. Además, permite abordar problemas complejos de manera eficiente. La adopción de enfoques de simulación avanzada por parte de las empresas les brinda ventajas competitivas al acelerar el desarrollo de productos y mejorar su capacidad para enfrentar desafíos en un mercado global en constante cambio. En el futuro, se espera que la simulación en elastómeros sea aún más crucial a medida que la industria busca materiales avanzados y respetuosos con el medio ambiente y se enfrenta a la creciente demanda de productos personalizados y tecnologías de fabricación aditiva. En este trabajo se han revisado los principales métodos utilizados para resolver la transferencia de calor en compuestos vulcanizados, haciendo hincapié en las mejoras que se necesitan en cada uno de ellos para que las herramientas de simulación puedan utilizarse de forma masiva en la industria., Simulation in elastomers is a crucial resou- rce in material research and development, offering tools to model and predict elastomer behavior under various conditions. This expe- dites the development of new materials and optimizes existing ones, reducing costs and time. Simulation is vital in optimizing vulcanization and modeling complex geometries, such as tire tread patterns. Furthermore, it enables efficient problem-solving in complex scenarios. Embracing advanced simulation approaches provides companies with a com- petitive edge by accelerating product deve- lopment and enhancing their ability to tackle challenges in a dynamically changing global market. In the future, simulation in elasto- mers is expected to be even more pivotal as the industry seeks advanced, eco-friendl materials and grapples with growing demand for customized products and additive ma- nufacturing technologies. In this work, the most important methods to solve heat trans- fer in rubber compounds have been revised, emphasizing in the improvements that each of them may need in order to become massi- vely used in the industry., Los autores agradecen al Ministerio de Ciencia e Innovación (RTI2018-096636-J-I00, PID2020- 119047RB-I00 y PLEC2021-007793) y al Gobierno de Aragón (EC-22-2021) por la financiación recibida. El grupo de Elastómeros pertenece a SUSPLAST, plataforma interdisciplinar del CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incorporación de polvo de neumático al final de su vida útil en bandas de rodadura

  • Zepeda Rodríguez, Z.
  • Salamanca, Fernando M.
  • Montero Escrivá, Marina
  • Calderón, Rebeca H.
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
Ejemplar dedicado a: Sostenibilidad, reciclado y valorización, Los neumáticos son un elemento fundamental en la vida cotidiana. Sin embargo, después de llegar al final de su vida útil, estos tienen una enorme complejidad para ser reciclados, por lo que una de las estrategias para ser reusados consiste en su trituración, molienda y separación de los demás componentes textiles y metálicos para obtener polvo de neumático. El polvo de neumático obtenido mediante este proceso ha sido utilizado en la producción de diversos productos útiles para la sociedad y sectores industriales como el de la construcción y automotriz. Una de las aplicaciones más atractivas consiste en su uso como ingrediente para la formulación de bandas de rodadura para la fabricación de neumáticos sólidos o agrícolas, neumáticos para nieve con o sin clavos y neumáticos para automóviles y turismos. Con su uso como ingrediente de formulación se pretende disminuir los costos de fabricación, incrementar algunas propiedades finales y la durabilidad de los productos que se obtienen y con ello convertirlo en un material de valor añadido y cerrar el ciclo sostenible de los neumáticos al final de su vida útil., Tires are a fundamental element in daily life. However, after reaching their life span, they have an enormous complexity to be recycled, so one of the strategies to be reused consists of shredding, grinding, and separating the other textile and metal components to obtain tire powder. Tire powder obtained by this method has been used in the production of various valuable products for society and industrial sectors such as the construction and automotive industries. One of the most attractive applications is its use as an ingredient in the formulation of treads for the manufacture of solid or agricultural tires, studded or studless snow tires, and tires for automobiles and passenger cars. Its use as a formulation ingredient is intended to reduce manufacturing costs and increase some final properties and the durability of the products obtained, thereby converting it into a value-added material and closing the sustainable cycle of tires at the end of their useful life., Se agradece la financiación al Ministe- rio de Ciencia, Innovación y Universidades (RTI2018-096636-J-I00), Ministerio de Cien- cia e Innovación (PID2020119047RB-I00 y PLEC2021-007793) y CSIC (201860E045). El grupo de Elastómeros pertenece a SUS-PLAST, plataforma interdisciplinar del CSIC. ZZR agradece al Consejo Nacional de Cien- cia y Tecnología (CONACYT-México) la beca posdoctoral otorgadapara el desarrollo de los proyectos.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mejorando la circularidad mediante el uso de monómeros renovables y estrategias químicas sostenibles de upcycling de polímeros

  • Zepeda Rodríguez, Z.
  • Salamanca, Fernando M.
  • Montero Escrivá, Marina
  • Diñeiro, L.
  • Rubio López, Ana
  • Narváez-Fagoaga, Maialen
  • Dios Caputto, María Dolores de
  • Calderón, Rebeca H.
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Valentín, Juan L.
Los plásticos están en todas partes. Los análisis del agua, el suelo e incluso los organismos biológicos corroboran este hecho. Esto es el resultado de un crecimiento anual de la producción mundial de polímeros que ha superado el crecimiento de la población y del producto interno bruto mundial. Las propiedades de resistencia y durabilidad, que hacen que los plásticos sean de gran utilidad durante su vida funcional, suponen graves desventajas al final de su vida útil, ya que estos materiales se desechan en su inmensa mayoría en vertederos o se filtran al medio ambiente. En este contexto, el proyecto SusChemPol (Sus- tainable Chemical strategies of Polymer upcycling) conformado por un consorcio de industria y academia, tiene como reto la resolución de estas problemáticas medioambientales. Para ello será necesario proponer diversos enfoques como el desarrollo de procesos de reciclaje sostenibles, la síntesis y producción de polímeros a partir de monómeros reciclados, la transformación de residuos plásticos en productos de valor añadido y finalmente, la evaluación técnica y económica de cada etapa. Plastics are everywhere. Analyses of water, soil, and even biological organisms confirm this issue. This results from an annual growth in global polymer production that has consistently outpaced global gross domestic product and population growth. The properties of strength and durability, that make plastics so useful during their functional lifetimes, are severe disadvantages at end-of-life, as these materials are overwhelmingly landfilled or leaked into the environment. In this context, the SusChemPol project (Sustainable Chemical Strategies of Polymer upcycling), formed by a consortium of industry and academia, has the challenge of solving these environmental problems. This will require proposing various approaches such as developing sustainable recycling processes, synthesizing and producing polymers from recycled monomers, transforming plastic waste into valueadded products, and, finally, evaluating each stage¿s technical and economic evaluation., Los autores agradecen al Ministerio de Ciencia e Innovación (RTI2018-096636-J- I00, PID2020-119047RB-I00 y PLEC2021- 007793) y al Gobierno de Aragón (EC-22- 2021) por la financiación recibida. Se agradece a Miguel Ángel Sanz (VALORIZA SERVICIOS MEDIOAMBIENTALES), Antoni Nogués (AR- KEMA), Sixto Arnaiz (GAIKER), Luis Otaño (NASIKA), Rebeca Yuste (REPSOL), Ramon Murillo (Instituto de Carboquímica - CSIC), Manuel López Granados y Rafael Mariscal Ló- pez (Instituto de Catálisis y Petroleoquímica - CSIC) y a Juan Rodríguez (Instituto de Cien- cia y Tecnología de Polímeros –