Pasar al contenido principal

Enhancing circularity by using renewable monomers and sustainable chemical strategies of polymer upcycling

PLEC2021-007793

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Permittivity Measurement of Ground-Tire Rubber (GTR) during Microwave-Assisted Devulcanization

  • Pérez-Campos, Rafael
  • Fayos-Fernández, José
  • Monzó-Cabrera, Juan
  • Martín Salamanca, Fernando
  • López Valentín, Juan
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Sánchez-Marín, Juan Rafael|||0000-0003-4887-5810
[EN] Many efforts are being made to find innovative ways of recycling rubber from end-of-life tires (ELTs), also called ground tire Rubber (GTR). Recycling through devulcanization allows the reintroduction of rubber back into the manufacturing industry. Such a process requires providing enough energy to break the sulfur links, while preventing damage to the polymeric chain. Microwave heating is controllable, efficient, and it does not rely on conventional heating mechanisms (conduction, convection) which may involve high heating losses, but rather on direct dielectric heating. However, to adequately control the microwave-assisted devulcanization performance, a thorough knowledge of the GTR permittivity versus temperature is required. In this work, GTR permittivity was monitored during its devulcanization. A resonant technique based on a dual-mode cylindrical cavity was used to simultaneously heat rubber and measure its permittivity at around 2 GHz. The results show sharp changes in the GTR permittivity at 160 and 190 degrees C. After the GTR cooled down, a shifted permittivity evidences a change in the GTR structure caused by the devulcanization process. Microwave-assisted devulcanization effectiveness is proven through time-domain nuclear magnetic resonance (NMR) measurements, by verifying the decrease in the cross-link density of processed GTR samples compared to the original sample., This research project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement number 870,000. More information at https://cordis.europa.eu/project/id/870000 (accessed on 27 August 2022) and https://valuerubber.eu/(accessed on 27 August 2022). JLV and FMS also thanks the funding from Ministerio de Ciencia e Innovacion (PID2020-119047RB-I00 y PLEC2021-007793), Gobierno de Aragon (EC-22-2021) and CSIC (201860E045).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shape-Memory Composites Based on Ionic Elastomers

  • González-Jiménez, Antonio
  • Bernal-Ortega, Pilar
  • Martín Salamanca, Fernando
  • Valentín, Juan L.
Shape-memory polymers tend to present rigid behavior at ambient temperature, being unable to deform in this state. To obtain soft shape-memory elastomers, composites based on a commercial rubber crosslinked by both ionic and covalent bonds were developed, as these materials do not lose their elastomeric behavior below their transition (or activation) temperature (using ionic transition for such a purpose). The introduction of fillers, such as carbon black and multiwalled carbon nanotubes (MWCNTs), was studied and compared with the unfilled matrix. By adding contents above 10 phr of MWCNT, shape-memory properties were enhanced by 10%, achieving fixing and recovery ratios above 90% and a faster response. Moreover, by adding these fillers, the conductivity of the materials increased from ~10<sup>−11</sup> to ~10<sup>−4</sup> S·cm<sup>−1</sup>, allowing the possibility to activate the shape-memory effect with an electric current, based on the heating of the material by the Joule effect, achieving a fast and clean stimulus requiring only a current source of 50 V., This research was funded by Ministerio de Ciencia e Innovación (MAT2011-23476, PID2020-119047RB-I00 y PLEC2021-007793), Ministerio de Economía y Competitividad (MAT2014-52644-R), and CSIC (201860E045)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelado matemático y simulación numérica en elastómeros: estado del arte

  • Martín Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Diñeiro García, Laura
  • Montero Escrivá, Marina
  • Herrero, Rebeca
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
La simulación en elastómeros es un recurso vital en la investigación y desarrollo de materiales, proporcionando herramientas para modelar y predecir el comportamiento de elastómeros en diversas condiciones. Esto acelera el desarrollo de nuevos materiales y optimiza los existentes, reduciendo costes y tiempo. La simulación es esencial en la optimización de la vulcanización y en la modelación de geometrías complejas, como los patrones de banda de rodadura de los neumáticos. Además, permite abordar problemas complejos de manera eficiente. La adopción de enfoques de simulación avanzada por parte de las empresas les brinda ventajas competitivas al acelerar el desarrollo de productos y mejorar su capacidad para enfrentar desafíos en un mercado global en constante cambio. En el futuro, se espera que la simulación en elastómeros sea aún más crucial a medida que la industria busca materiales avanzados y respetuosos con el medio ambiente y se enfrenta a la creciente demanda de productos personalizados y tecnologías de fabricación aditiva. En este trabajo se han revisado los principales métodos utilizados para resolver la transferencia de calor en compuestos vulcanizados, haciendo hincapié en las mejoras que se necesitan en cada uno de ellos para que las herramientas de simulación puedan utilizarse de forma masiva en la industria., Simulation in elastomers is a crucial resou- rce in material research and development, offering tools to model and predict elastomer behavior under various conditions. This expe- dites the development of new materials and optimizes existing ones, reducing costs and time. Simulation is vital in optimizing vulcanization and modeling complex geometries, such as tire tread patterns. Furthermore, it enables efficient problem-solving in complex scenarios. Embracing advanced simulation approaches provides companies with a com- petitive edge by accelerating product deve- lopment and enhancing their ability to tackle challenges in a dynamically changing global market. In the future, simulation in elasto- mers is expected to be even more pivotal as the industry seeks advanced, eco-friendl materials and grapples with growing demand for customized products and additive ma- nufacturing technologies. In this work, the most important methods to solve heat trans- fer in rubber compounds have been revised, emphasizing in the improvements that each of them may need in order to become massi- vely used in the industry., Los autores agradecen al Ministerio de Ciencia e Innovación (RTI2018-096636-J-I00, PID2020- 119047RB-I00 y PLEC2021-007793) y al Gobierno de Aragón (EC-22-2021) por la financiación recibida. El grupo de Elastómeros pertenece a SUSPLAST, plataforma interdisciplinar del CSIC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estrategias y mejoras en el reciclaje de compuestos elastoméricos

  • Zepeda Rodríguez, Z.
  • Salamanca, Fernando M.
  • Montero Escrivá, Marina
  • Diñeiro García, Laura
  • Calderón, Rebeca H.
  • Fernández Torres, A.
  • Navarro Crespo, Rodrigo
  • González-Nuñez, Rubén
  • Valentín, Juan L.
Ejemplar dedicado a: Elastómeros y poliuretanos, aditivos en polímeros, Los compuestos elastoméricos debido a su estructura tienen diversas aplicaciones industriales y en la vida cotidiana, sin embargo, la fabricación de estos materiales pensando en su aplicación y durabilidad, complica su reciclaje y reprocesado una vez termina su vida útil. Procesos como la regeneración y desvulcanización de estos residuos los convierten en un material industrialmente atractivo y sirven como ingredientes para la fabricación de nuevos productos. Por ello, es importante contar con diversas técnicas simples para evaluar la eficiencia de la desvulcanización, entendiendo, además, el mecanismo físico y químico que permitirá realizar mejoras y optimizaciones como el uso de diversos agentes de desvulcanización, y de conocer la influencia de diversos factores que están involucrados en los cauchos que se pretenden desvulcanizar, tales como su composición y contenido de cargas y aditivos. Estas mejoras, técnicas y ayudas de desvulcanización favorecerán los procesos actuales obteniendo materiales desvulcanizados homogéneos y de manera selectiva, sin comprometer sus propiedades mecánicas y de aplicación final, Due to their structure, elastomeric compounds have several industrial and daily life applications; however, the manufacture of these materials with their application and durability in mind complicates their recycling and reprocessing once they are no longer useful. Techniques such as regeneration and devulcanization of these wastes turn them into an industrially attractive material and can be used as ingredients to manufacture new products. Therefore, it is important to have several simple techniques to evaluate the efficiency of devulcanization, understanding the physical and chemical mechanism that will also allow improvements and optimizations such as the use of different devulcanization agents, as well as knowing the influence of various factors that are involved in the rubbers to be devulcanized, such as their composition and content of fillers and additives. These improvements, techniques, and devulcanization aids will enhance the current processes by obtaining homogeneously and selectively devulcanized materials without compromising their mechanical properties and final application, Se agradece la financiación al Ministerio de Ciencia e Innovación (PID2020119047RB-I00 y PLEC2021-007793) y al Gobierno de Aragón (EC-22-2021). El grupo de Elastómeros pertenece a SUSPLAST, plataforma interdisciplinar del CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Despolimerización de residuos de poliestireno por pirólisis: desarrollo del proceso hacía una economía circular

  • Royuela García, David
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
2 tablas.-- Abstract de la comunicación oral presentada en la XVI REUNIÓN GEC 2023 en la sección Aplicaciones catalíticas, medioambientales y biosanitarias, Gijón (España), celebrada del 22 al 25 de octubre de 2023., El incremento anual de la producción mundial de plásticos conlleva una generación ingente de residuos. Debido a ello, surge la necesidad de encontrar soluciones sostenibles enmarcadas en modelos de economía circular, donde el reciclaje químico resulta crucial para llevar a cabo dicha transición. En este sentido, la pirólisis, un proceso de degradación térmica en atmósfera libre de oxígeno, permite recuperar diferentes compuestos precursores de combustibles o materias primas. Particularmente, este proceso permite obtener altos rendimientos del monómero original para el caso del poliestireno (PS), aunque todavía es necesario realizar una caracterización más profunda de los productos y optimizar el proceso tanto de pirólisis como de repolimerización para conseguir un polímero de una calidad comparable al original. Este estudio tiene por objeto la obtención de una fracción líquida rica en estireno (pyro-oil) con potencial para ser utilizada como materia prima en la producción de nuevos polímeros., Los autores agradecen al Gobierno de Aragón (DGA) por el apoyo prestado en el marco del programa de apoyo a grupos de investigación, al CSIC por la plataforma temática interdisciplinar SUSPLAST, al Ministerio de Ciencia e Innovación Español, a la Agencia de Investigación del Estado y a la Unión Europea por la financiación (PLEC2021-007793)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrolysis of polystyrene using low-cost natural catalysts: Production and characterisation of styrene-rich pyro-oils

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
5 figures, 3 tables.-- Supplementary information available., This work aims to study the catalytic pyrolysis of polystyrene (PS) in order to obtain a styrene-rich liquid appealing for re-polymerisation processes. The process was performed in a fixed-bed reactor using low-cost materials such as ilmenite, olivine, calcium oxide (CaO) and dolomite as catalysts at 600 ºC. A non-catalytic test with sand was also conducted for comparison purposes. The resulting pyro-oil yield was between 89 and 96 wt%, and consisted mainly of styrene monomer, styrene dimer and styrene trimer, as well as other light aromatic compounds depending on the catalyst used. Olivine and CaO were capable to increase the styrene monomer concentration in the pyro-oil by about 10–12 % compared to non-catalytic pyrolysis, reaching up to 74.5 and 71.4 wt%, respectively. Furthermore, these catalysts reduced the concentration of styrene dimer and styrene trimer in the pyro-oil, which could be useful for further re-polymerisation processes. However, the presence of polyaromatics (PAHs) in the pyro-oils obtained from ilmenite, olivine and CaO was also identified, and other families such as mono-aromatics, di-aromatics, BTX, and nitrogen heterocyclic compounds were also increased in all pyro-oils obtained with catalysts compared to those obtained by non-catalytic pyrolysis. In addition, several inorganic species in the pyro-oil were reduced by the addition of the catalysts. This effect was observed after the addition of olivine and CaO, especially in the reduction of S, Mg, Ca and Fe. These results clearly demonstrate the potential of pyrolysis to convert PS waste into valuable building blocks for the production of new plastics., The authors would like to thank MCIN/AEI and EU/ PRTR for their financial support (Project SusChemPol, PLEC2021–007793) and thank MINECO and FEDER for their financial support (Project PID2021–123759OB-I00 and project TED2021–130093B-C21). The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research groups support programme and CSIC for the interdisciplinary thematic platform SUSPLAST and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning of molecular weight and chemical composition of polyols obtained from Poly(ethylene terephthalate) waste recycling through the application of organocatalysts in an upcycling route

  • Dios Caputto, María Dolores de
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
  • Marcos-Fernández, Ángel
High molecular weight liquid polyols were produced from complex Poly (ethylene terephthalate) (PET) waste (low molecular weight PET waste, monolayer compounds, and coloured PET bottles) in one-step synthesis using mild reaction conditions. For the first time, a wide range of upcycled polyols were obtained by modulating the reaction conditions to control the chemical composition and molecular weight, in order to revalorize the same PET waste in different polyols. A new versatile, efficient, selective and sustainable chemical recycling method was developed, employing cheap reagents (ethylene carbonate) and basic organocatalysts, under mild reaction conditions (moderate temperatures and atmospheric pressure). Chemically, the polyols showed a singular composition, consisting of three types of repeating units, two coming from PET and one belonging to the ethylene carbonate ring-opening. Depending on the depolymerisation conditions of the PET waste and the catalyst used, the ratio between these moieties varied considerably, giving rise to a wide portfolio of liquid polyols. In addition, the ability of the organocatalyst to introduce the carbonate unit into the polyol chain was analysed as a function of the number of ethylene carbonate units used. As a proof of concept, these new liquid secondary raw materials served as a starting point for the synthesis of polyurethanes under standard conditions. Ultimately, the final objective of this upcycling process will be the application of a wide range of high-quality polyols as soft segments to produce more sustainable and high-performance polyurethanes (flexible foams, coatings, sealants, adhesives, elastomers)., The authors thank the Spanish Ministerio de Economía e Innovación (projects PLEC 2021-007793 and PID 2020-119047RB-I00) for financial support. M.D.D.C. thanks the Comunidad de Madrid for predoctoral grant PIPF-2022/ECO-24517 and Spanish National Research Council for internship Imove23133. R.N., A.M.F. and J.L.V. are members of the SusPlast platform of CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermochemical recycling of polystyrene waste by pyrolysis using a pilot-scale auger reactor: Process demonstration in a relevant environment

  • Royuela García, David
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
5 figures, 2 tables.-- Supplementary information available., This study presents the pyrolysis of polystyrene waste using a single-auger pyrolysis reactor at an industrially relevant scale, i.e. within the fifth technology readiness level (TRL-5). In order to gain a better understanding of the influence of the main variables involved in this technology, a thorough experimental campaign was performed with PS feed rates of 6 and 9 kg/h, covering a temperature range of 450–600 °C. These variables influence not only the distribution of the products, but also the presence of compounds that may affect the suitability of the pyro-oil for re-polymerisation processes. In this sense, gas chromatography (GC), gas chromatography coupled to mass spectrometry (GC/MS) and simulated distillation (SimDist) of the resulting pyro-oils provided valuable insights into styrene purification. The data collected confirms the strength of the auger reactor for thermochemical recycling of polystyrene waste, and contributes to the future development of the plastics circularity on an industrial scale., This work is part of the SUSCHEMPOL project, financed by the Spanish Ministry of Science and Innovation, State Research Agency (MCIN/AEI/10.13039/501100011033), and by the European Union NextGenerationEU/PRTR. The authors would like to acknowledge the support provided for Project PID2021-123759OB-I00, funded by MICIU/AEI /10.13039/501100011033 and by FEDER, EU, as well as for Project TED2021130093B-C21, funded by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program, as well as the interdisciplinary CSIC platforms SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mejorando la circularidad mediante el uso de monómeros renovables y estrategias químicas sostenibles de upcycling de polímeros

  • Zepeda Rodríguez, Z.
  • Salamanca, Fernando M.
  • Montero Escrivá, Marina
  • Diñeiro, L.
  • Rubio López, Ana
  • Narváez-Fagoaga, Maialen
  • Dios Caputto, María Dolores de
  • Calderón, Rebeca H.
  • Fernández Torres, Alberto
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Valentín, Juan L.
Los plásticos están en todas partes. Los análisis del agua, el suelo e incluso los organismos biológicos corroboran este hecho. Esto es el resultado de un crecimiento anual de la producción mundial de polímeros que ha superado el crecimiento de la población y del producto interno bruto mundial. Las propiedades de resistencia y durabilidad, que hacen que los plásticos sean de gran utilidad durante su vida funcional, suponen graves desventajas al final de su vida útil, ya que estos materiales se desechan en su inmensa mayoría en vertederos o se filtran al medio ambiente. En este contexto, el proyecto SusChemPol (Sus- tainable Chemical strategies of Polymer upcycling) conformado por un consorcio de industria y academia, tiene como reto la resolución de estas problemáticas medioambientales. Para ello será necesario proponer diversos enfoques como el desarrollo de procesos de reciclaje sostenibles, la síntesis y producción de polímeros a partir de monómeros reciclados, la transformación de residuos plásticos en productos de valor añadido y finalmente, la evaluación técnica y económica de cada etapa. Plastics are everywhere. Analyses of water, soil, and even biological organisms confirm this issue. This results from an annual growth in global polymer production that has consistently outpaced global gross domestic product and population growth. The properties of strength and durability, that make plastics so useful during their functional lifetimes, are severe disadvantages at end-of-life, as these materials are overwhelmingly landfilled or leaked into the environment. In this context, the SusChemPol project (Sustainable Chemical Strategies of Polymer upcycling), formed by a consortium of industry and academia, has the challenge of solving these environmental problems. This will require proposing various approaches such as developing sustainable recycling processes, synthesizing and producing polymers from recycled monomers, transforming plastic waste into valueadded products, and, finally, evaluating each stage¿s technical and economic evaluation., Los autores agradecen al Ministerio de Ciencia e Innovación (RTI2018-096636-J- I00, PID2020-119047RB-I00 y PLEC2021- 007793) y al Gobierno de Aragón (EC-22- 2021) por la financiación recibida. Se agradece a Miguel Ángel Sanz (VALORIZA SERVICIOS MEDIOAMBIENTALES), Antoni Nogués (AR- KEMA), Sixto Arnaiz (GAIKER), Luis Otaño (NASIKA), Rebeca Yuste (REPSOL), Ramon Murillo (Instituto de Carboquímica - CSIC), Manuel López Granados y Rafael Mariscal Ló- pez (Instituto de Catálisis y Petroleoquímica - CSIC) y a Juan Rodríguez (Instituto de Cien- cia y Tecnología de Polímeros –
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Pirólisis catalítica del poliestireno: identificación de potenciales inhibidores durante la repolimerización del estireno recuperado

  • Royuela García, David
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
1 tabla.-- Resumen de la comunicación oral presentada en la I Jornada de Jóvenes Investigadores del Grupo Español del Carbón, JJGEC22: Aplicaciones de materiales de carbono para el desarrollo sostenible, celebrada en Baeza (Jaén) del 30 de noviembre al 2 de diciembre de 2022., La producción mundial de plásticos aumenta constantemente cada año y es necesario buscar una solución sostenible desde el punto de vista de la economía circular a largo plazo. Dentro de las estrategias propuestas, el reciclaje químico resulta crucial para una transición hacía la economía circular. Entre todos los procesos destaca la pirólisis, un proceso de degradación térmica en ausencia de oxígeno capaz de recuperar diferentes compuestos que pueden servir de precursores de combustibles o materias primas. Uno de los casos más destacados es la producción de altos rendimientos del monómero original en el caso de la pirólisis de poliestireno (PS), aunque todavía quedan muchos desafíos para reproducir un polímero de una calidad similar al original. En base a esto, en este estudio se ha evaluado la pirólisis catalítica de PS con el objetivo de obtener una fracción líquida rica en estireno con potencial para ser utilizado directamente como materia prima en un proceso de repolimerización del polímero. Para ello se han utilizado residuos de PS procedentes de la industria alimentaria, los cuales, al presentar un alto contenido de materia volátil (98.4 % en peso) poseen gran potencial para ser sometidos al proceso de pirólisis. Dichos experimentos catalíticos se han llevado a cabo en un reactor de lecho fijo a escala de laboratorio utilizando ilmenita, olivina, dolomita y óxido de calcio (CaO) como catalizadores a una temperatura de reacción de 600 ºC. Cabe destacar el alto rendimiento a líquido (mayor del 89 % en peso en todos los casos). Los compuestos identificados y cuantificados en dicha fracción se reflejan en la Tabla 1, siendo el estireno el componente principal, seguido por el dímero, trímero y otros compuestos aromáticos ligeros como el benceno o tolueno., Los autores agradecen al Gobierno de Aragón (DGA) por el apoyo prestado en el marco del programa de apoyo a grupos de investigación, por la financiación al proyecto SusChemPol, PLEC2021-007793, al Ministerio de Ciencia e Innovación Español, Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) y a la Unión Europea NextGenerationEU/PRTR y a la plataforma temática interdisciplinar SUSPLAST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Pirólisis de residuos de poliestireno: transición hacía su economía circular

  • Royuela García, David
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
1 tabla.-- Resumen de la comunicación oral presentada en el Congreso de Sostenibilidad y Economía Circular Aplicada “A la búsqueda de soluciones”, CSECA, celebrado del 11-12 diciembre 2024 en Madrid., En la sociedad actual, el plástico se considera un material esencial en múltiples sectores. Debido a ello, tanto la producción como la generación de residuos asociada a nivel mundial incrementa anualmente. En este contexto, la mala gestión de los plásticos está conllevando impactos irreversibles en el medio ambiente. En la búsqueda de soluciones sostenibles enmarcadas en modelos de economía circular a partir del reciclado químico surge la pirólisis. Para el caso particular de los residuos de poliestireno (PS), este proceso termoquímico, el cual se lleva a cabo en atmósfera libre de oxígeno, permite recuperar el monómero original. Así, dicha fracción rica en estireno (pyro-oil) surge como potencial materia prima para la producción de nuevos polímeros. No obstante, la obtención de polímeros con una calidad comparable al original requiere un proceso de purificación previo al proceso de repolimerización. En este trabajo se ha llevado a cabo el estudio de la pirólisis de PS en un reactor tipo Auger o tornillo sinfín a escala piloto (TRL-5) con hasta 10 kg/h de capacidad nominal. Para ello, se investigó el efecto asociado tanto a la temperatura (500-550-600 °C) como al flujo de alimentación (6-9 kg/h), variable directamente ligada con el tiempo de residencia de los volátiles. Los resultados indicaron rendimientos máximos de pyro-oil del 92 % en peso a un caudal de alimentación de 9 kg/h. La caracterización de dicho pyro-oil, mostrada en la Tabla 1, evidencia una composición mayoritaria de estireno (70.1-76.1 % en peso), con un incremento en su concentración a temperaturas moderadas. La composición restante consta principalmente de compuestos aromáticos ligeros (BTE) y de oligómeros de estireno. Si bien los compuestos BTE mostraron una mayor producción a temperaturas elevadas, se observó una marcada disminución en la concentración de los dímeros y trímeros de estireno. Posteriormente, dicho pyro-oil fue sometido a un proceso de purificación mediante un proceso de destilación fraccionada mediante un sistema de destilación Pilodist®. Este proceso posibilitó la separación de compuestos puntos de ebullición inferiores al del estireno (145 °C), incrementando así la concentración del monómero de estireno por encima del 90 % en peso., Los autores agradecen al Gobierno de Aragón (DGA) por el apoyo prestado en el marco del programa de apoyo a grupos de investigación, al CSIC por las plataformas interdisciplinares SUSPLAST y SosEcoCir y por la financiación del proyecto SusChemPol, PLEC2021-007793, al Ministerio de Ciencia e Innovación Español, Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) y a la Unión Europea NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manifestation of Rouse and Entanglement Dynamics in Non-Cross-Linked and Cross-Linked Polymers Studied by Field-Cycling and Multiple Quantum NMR

  • Becher, M.
  • Martín Salamanca, Fernando
  • Valentín, Juan L.
  • Saalwächter, K.
  • Rössler, E. A.
Rubbers prepared from technical poly(butadiene) and natural poly(isoprene) are studied by field-cycling (FC) 1H NMR relaxometry to elucidate the changes of the relaxation spectrum. Starting with the non-cross-linked polymer successively cross-links are introduced via sulfur or peroxide vulcanization. Applying an advanced home-built relaxometer allows one to probe entanglement dynamics in addition to Rouse dynamics. We show that entanglement dynamics evidenced in terms of a characteristic power-law in the NMR susceptibility is still observed with an exponent identical to that in non-cross-linked linear polymers. Yet, the entanglement regime disappears more and more from the accessible frequency window upon increasing the cross-link density and a spectrally enlarged Rouse regime is revealed. Adding a swelling agent, the manifestation of the Rouse and entanglement regimes virtually does not change, yet, the apparent power-law exponents increase. Concomitant multiple-quantum (MQ) 1H NMR experiments provide information on the structure of the rubber network in terms of the residual dipolar coupling and the fraction of the network defects, i.e., persisting entangled or nonentangled chains, introduced upon cross-linking and swelling., The work was supported by the Deutsche Forschungsgemein- schaft (DFG) through the grant RO/907-22. We appreciate valuable comments by Nail Fatkullin. F.M.S. and J.L.V. thank the Spanish Ministry of Science and Innovation (MINECO) for the funding received under grants PID2020-119047RB-I00, PLEC2021-007793 and PID2023-147542OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dehydration of Tetrahydrofurfuryl Alcohol Into Dihydropyran on γ-Al2O3 Catalyst: Reaction Monitoring by In Situ DRIFT Spectroscopy

  • Pulido, José A.
  • Vila, Francisco
  • Martín Alonso, David
  • López Granados, Manuel
  • Mariscal López, Rafael
In this study, in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy was used to analyze the surface reactivity during the dehydration of tetrahydrofurfuryl alcohol (THFA) to 3,4-dihydro-2H-pyran (DHP). The dehydration reaction of THFA is carried out in the gas phase at 648 K using activated γ-Al2O3 as catalyst. Under these conditions, a yield of 84% DHP is obtained in a fixed-bed reactor and the catalyst shows no signs of deactivation after 70 h. The information obtained with DRIFT in situ spectroscopy depends on the reaction conditions, with the concentration of THFA in the gas phase being a critical variable. The temperature and time on stream have also been studied. This technique has allowed to identify DHP, the product of interest, two products with carbonyl group (C = O) formed in the surface of the catalyst during the reaction, and also the formation of carboxylates from the reaction of surface species with the oxygens of the oxide catalyst. This is of considerable significance, as an understanding of the molecular processes occurring at the surface during the reaction would permit the rational design of catalysts to enhance their catalytic properties. Therefore, in situ DRIFT spectroscopy is a valuable tool for studying active catalysts in the THFA dehydration reaction. © The Author(s) 2024., This work was financially supported by the Circular Bio-based Europe Joint Undertaking (CBE-JU) under the Horizon Europe research and innovation program, grant agreement 101112379. Additionally, it received funding from grants PID2021-122736OB-C41 and PLEC2021-007793, which were funded by MCIN/AEI/https://doi.org/10.13039/501100011033/ European Union NextGenerationEU/PRTR. Finally, one of us JAP thanks to the Ph.D. Program in Applied Chemistry of the Doctoral School of the Autonomous University of Madrid. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Métodos de RMN en el dominio del tiempo aplicados al estudio de estructura y dinámica molecular en cauchos

  • Salamanca, F. M.
  • Montero Escrivá, Marina
  • Diñeiro García, Laura
  • Zepeda Rodríguez, Z.
  • Fernández Torres, A.
  • Herrero Calderón, Rebeca
  • Valentín, Juan L.
  • Navarro Crespo, Rodrigo
Ejemplar dedicado a: innovaciones en polímeros, La elasticidad de los compuestos de caucho viene determinada por los parámetros moleculares que definen la estructura de la red. Se han aplicado diversas técnicas experimentales para obtenerlos. Los experimentos de Múltiple Coherencia Cuántica de Resonancia Magnética Nuclear (MQ-RMN) permiten caracterizar la estructura molecular de los materiales de caucho basándose en la función de correlación y la relajación spin-spin. El acoplamiento dipolar residual es el principal observable que cuantifica la densidad de restricción a nivel molecular. Este enfoque también es sensible a la fracción no elásticamente activa del material, es decir, la fracción de defectos. La dinámica molecular puede evaluarse directamente midiendo la velocidad de relajación de la red de spin en un amplio rango de frecuencias de Larmor. Utilizando un relaxómetro casero y aplicando el principio de superposición frecuencia-temperatura, se revelan espectros de relajación que cubren unos diez órdenes de magnitud en frecuencia. Se interpretan en términos de dinámica de Rouse y de entrelazamientos., The elasticity of rubber compounds is determined by the molecular parameters that define the network structure. Various experimental techniques have been applied to obtain these parameters. Multiple Quantum Nuclear Magnetic Resonance (MQ-NMR) experiments allow us to characterize the average molecular structure of rubber materials based on the correlation function and spin-spin relaxation. The residual dipolar coupling is the main observable that quantifies the constraint density at a molecular level. This approach is also sensitive to the non-elastically active fraction of material, i.e., the fraction of defects. Field cycling NMR has been widely applied to study polymers. Molecular dynamics can be directly probed by measuring the spin-lattice relaxation rate over a wide range of Larmor frequencies. Using a home-built relaxometer and appealing to frequency-temperature superposition, relaxation spectra which cover about ten decades in frequency are revealed. They are interpreted in terms of Rouse and entanglement dynamics., Los autores agradecen al Ministerio de Cien- cia e Innovación (MICINN) por la financiación recibida a través de los siguientes proyectos: PID2020-119047RB-I00, PLEC2021-007793 y PID2023-147542OB-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of Vitrimers with Simultaneous Degradable and Dynamic Crosslinkers: Mechanical and Thermal Behavior Based on Transesterification Reactions Between β-Amino Esters and Hydroxylated Acrylate/Methacrylate Monomers

  • Ayensa, Naroa
  • Reviriego, Felipe
  • Reinecke, Helmut
  • Gallardo Ruiz, Alberto
  • Elvira, Carlos
  • Rodríguez-Hernández, Juan
In recent years, efforts have focused on developing repairable, malleable, and recyclable thermoset materials to reduce the growing volume of polymer waste and extend the lifetime of existing polymeric materials. Specifically, associative covalent adaptable networks (CANs), also known as vitrimers, have received considerable attention. In this work, photopolymerizable vitrimers were prepared by combining crosslinkers containing β-amino esters in their structure with hydroxylated acrylate or methacrylate monomers, with the aim of reprocessing these materials through the activation of transesterification reactions. The network design and photopolymerization conditions were optimized to ensure the successful formation of the vitrimers. Tunable mechanical and thermal properties were achieved by varying their chemical composition. Furthermore, the reprocessing ability of these materials was confirmed through thermal treatments. Additionally, these vitrimers exhibited the ability to undergo hydrolysis in basic aqueous media, providing an alternative pathway for recycling., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Ciencia, Innovación y Universidades (RTI2018-096328-B-I00) and TED2021-130093B-C22 financed by MCIN/AEI/10.13039/501100011033 and European Union “NextGeneration EU”/PRTR (PDC2022-133446-I00), as well as by the Instituto de Salud Carlos III (ISCIII)(PI21/00858). We would like to acknowledge financial support from the PTI Susplast as well as from the Agencia Estatal de Investigación (AEI) through the project “Enhancing Circularity by Using Renewable Monomers and Sustainable Chemical Strategies of Polymer Upcycling (PLEC2021-007793)”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in the circular economy of polystyrene: A critical review of pyrolysis in pilot-scale systems, distillation, and re-polymerization

  • Royuela García, David
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Martínez Ángel, Juan Daniel
16 figures, 5 tables., The widespread use of plastics in many sectors has resulted in the generation of a significant amount of waste, causing major environmental issues. Polystyrene (PS) is one of the most demanded polymers nowadays. Therefore, a consistent recycling pathway must be established to transition to a circular economy strategy. Pyrolysis of PS can recover styrene monomer (SM) in a liquid fraction that can be used to make new plastics. This replaces the need for fossil-based styrene and creates a circular economy. Although literature on this technology exists at the laboratory scale, advancing it to the pilot scale and beyond is crucial for its near-term deployment. Thus, this review compiles pilot-scale pyrolysis studies of PS and provides the industrial potential of each examined technology. It also emphasizes the need to implement a pyro-oil purification process via distillation, which has been demonstrated to achieve a purity level of over 99 wt% for SM. The potential for producing new PS products with comparable properties to conventional ones using the recovered styrene (r-styrene) in the so-called re-polymerization process is also addressed. Some research gaps, challenges and future perspectives are also outlined. Among others, distillation and re-polimerization on pilot-scales are necessary to be demonstrated to endorse the potential benefits of PS pyrolysis-based recycling. In-depth life cycle assessments (LCAs) using industrially relevant data are also expected in the future. This comprehensive analysis of the PS circular economy cycle through pyrolysis, distillation and re-polymerization is expected to boost the deployment of industrial-scale plants., The authors would like to acknowledge the support provided for the following projects: PLEC2021–007793 (Suschempool), funded by Ministry of Science and Innovation; PID2021-123759OB-I00 funded by MICIU/AEI/10.13039/501100011033 and “ESF Investing in your future” and TED2021-130093B-C21 funded by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program, as well as the interdisciplinary CSIC platforms SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reciclado químico de poliuretanos: estado del arte actual y perspectivas

  • Diñeiro García, Laura
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
El principal problema de los plásticos en ge neral, y de los poliuretanos en particular, es el tratamiento de los residuos posconsumo que, con frecuencia, se descartan en vertederos o se destinan a la recuperación energética a través de su incineración. Actualmente, hay numerosas tecnologías con las que es posible dar una segunda vida útil a estos productos y reducir el impacto medioambiental de una industria que no deja de crecer; la más im portante es el reciclado químico. En este artí culo se analizan en profundidad las distintas vías de reciclado a las que se pueden someter los residuos de poliuretano, y se pone sobre la mesa una cuestión que puede cambiar el paradigma del reciclado químico: la realidad de que este método de producción de ma terias primas secundarias completa el círculo de vida de los poliuretanos, contribuye a la sostenibilidad y tiene una importancia signifi cativa para la economía circular global., The main concern regarding plastics in gene ral, and polyurethanes in particular, is waste treatment; more often than not, polyurethane goods are discarded after their use and end up in landfills or meet their end in the energy Palabras clave: reciclado químico, econo mía circular, materias primas secundarias, glicólisis, hidrólisis, sostenibilidad. recovery sector through incineration. Today, there are numerous technologies that can be used to give these products a second life and reduce the environmental impact of an ever growing industry, the most important of which is undoubtedly chemical recycling. This article takes an in-depth look at the different recy cling routes that polyurethane waste can be subjected to, and discusses an issue that can change the paradigm of chemical recycling: the knowledge that this particular method of secondary raw material production completes the circle of the life of polyurethanes, con tributes to sustainability and is of significant importance for the global circular economy., Los autores agradecen el apoyo económi co prestado por ChemSkills y la UE (ERAS MUS-EDU-2022-PI-ALL-INNO), y por el Ministerio de Ciencia, Innovación y Univer sidades (PID2020-119047RB-I00, PID2023 147542OB-I00, y PLEC2021-007793)., Peer reviewed