Pasar al contenido principal

AUTOTHERMAL PYROLYSIS OF MIXED PLASTIC WASTE (MPW) FOR THE PRODUCTION OF HIGH-QUALITY SUSTAINABLE FUELS

PID2021-123759OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the production of syngas from spent green tea waste through dual-stage pyrolysis and catalytic cracking

  • Ben Abdallah, Asma
  • Ben Hassen Trabelsi, Aïda
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Navarro López, María Victoria
  • Mihoubi, Daoued
8 figures, 5 tables., A sequential two-step thermochemical process was studied for spent green tea waste (SGTW), involving an initial pyrolysis step followed by thermal or catalytic cracking. This process was carried out in two bench-scale reactors (fixed bed reactor and tubular reactor) serially coupled. At a fixed pyrolysis temperature of SGTW (550 °C), the application of high cracking temperatures (700 and 800 °C) positively affected both the yield and composition of the gas product. Consequently, it has the potential to be used for the production of diverse biofuels and chemicals, or to be partially recycled to optimize the process efficiency. Moreover, the use of inexpensive catalysts, particularly dolomite, was considered advantageous, since the syngas yield (56.5 wt%) and its potential were greatly enhanced, reaching a H2/CO ratio of 1.5. The homogenous biochar obtained, with a calorific value of 26.84 MJ/kg, could be harnessed as good-quality fuel for briquette applications and as a biofuel source for generating stationary power. Furthermore, catalytic cracking pyrolysis was examined for different types of coffee waste, revealing that this process is a simple and clean solution to valorize oxygen-rich lignocellulosic biomass and generate valuable gaseous by-products., This work was supported and funded by the Ministry of Higher Education and Scientific Research (MESRST) in Tunisia (Program 2020–2021). The financial support for this work was also given by the Grant PID2021-123759OB-I00 funded by MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe”, as well as by the Regional Government of Aragon (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pursuing the circularity of wind turbine blades: Thermochemical recycling by pyrolysis and recovery of valuable resources

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
  • Verdejo, Raquel
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
4 figures, 6 tables., Wind turbine blades (WTBs) are the primary waste generated by the wind energy industry and represent one of the major challenges associated with renewable energy from a disposal perspective. Therefore, it is necessary to develop recycling processes to address this environmental issue as circular economy strategies are implemented. This work investigates the technical feasibility of a combined thermochemical process to recover high-quality glass fibers from WTBs while optimizing the composition of the liquid and gaseous fractions. For this purpose, a thermal pyrolysis process in the range of 450–500 °C was studied in a laboratory-scale fixed-bed reactor, followed by thermal cracking of the vapors between 300 and 700 °C. The fixed bed reactor in which the pyrolysis was performed was also used to study a secondary thermochemical process under oxidizing conditions in order to remove residual exogenous organic compounds from the recovered fibers (RFs). For the sake of comparison, a muffle furnace was also used in this second stage. The results indicate that high yields of RFs can be recovered (75.8–77.5 wt%) and, depending on the temperature used in the cracking reactor, either valuable gas (up to 12.9 wt%) or phenol-rich oils (in the range of 8.8–18.7 wt%) can be produced. In addition, carbonaceous compounds can be completely cleaned of RFs after an oxidation process in the same pyrolysis unit, providing a highly versatile process. As an additional advantage, it is observed that after oxidation the RFs are functionalized. This work aims at creating a resource-efficient circular economy, specifically for waste generated from end-of-life renewable energy technologies such as wind turbines., The authors thank the Regional Government of Aragon (DGA) for the support provided under the research group support program and MINECO for their financial support (Project PID2021-123759OB-I00 and Project TED2021-130093B-C21). Authors also thank CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Pursuing the circularity of wind turbine blades: Thermochemical recycling by pyrolysis and recovery of valuable resources [Dataset]

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
  • Verdejo, Raquel
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
Under a Creative Commons BY-NC-ND 4.0 license., GC/MS chromatogram for the oil at 400-450 °C.-- SEM micrographs and EDS analysis for WTBs..-- SEM micrographs and EDS analysis for the RFs resulting from pyrolysis.-- SEM micrographs and EDS analysis for the RFs resulting from pyrolysis + oxidation (both in fixed-bed)., The authors thank the Regional Government of Aragon (DGA) for the support provided under the research group support program and MINECO for their financial support (Project PID2021–123759OB-I00 and Project TED2021–130093B-C21). Authors also thank CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrolysis of polystyrene using low-cost natural catalysts: Production and characterisation of styrene-rich pyro-oils

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
5 figures, 3 tables.-- Supplementary information available., This work aims to study the catalytic pyrolysis of polystyrene (PS) in order to obtain a styrene-rich liquid appealing for re-polymerisation processes. The process was performed in a fixed-bed reactor using low-cost materials such as ilmenite, olivine, calcium oxide (CaO) and dolomite as catalysts at 600 ºC. A non-catalytic test with sand was also conducted for comparison purposes. The resulting pyro-oil yield was between 89 and 96 wt%, and consisted mainly of styrene monomer, styrene dimer and styrene trimer, as well as other light aromatic compounds depending on the catalyst used. Olivine and CaO were capable to increase the styrene monomer concentration in the pyro-oil by about 10–12 % compared to non-catalytic pyrolysis, reaching up to 74.5 and 71.4 wt%, respectively. Furthermore, these catalysts reduced the concentration of styrene dimer and styrene trimer in the pyro-oil, which could be useful for further re-polymerisation processes. However, the presence of polyaromatics (PAHs) in the pyro-oils obtained from ilmenite, olivine and CaO was also identified, and other families such as mono-aromatics, di-aromatics, BTX, and nitrogen heterocyclic compounds were also increased in all pyro-oils obtained with catalysts compared to those obtained by non-catalytic pyrolysis. In addition, several inorganic species in the pyro-oil were reduced by the addition of the catalysts. This effect was observed after the addition of olivine and CaO, especially in the reduction of S, Mg, Ca and Fe. These results clearly demonstrate the potential of pyrolysis to convert PS waste into valuable building blocks for the production of new plastics., The authors would like to thank MCIN/AEI and EU/ PRTR for their financial support (Project SusChemPol, PLEC2021–007793) and thank MINECO and FEDER for their financial support (Project PID2021–123759OB-I00 and project TED2021–130093B-C21). The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research groups support programme and CSIC for the interdisciplinary thematic platform SUSPLAST and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermochemical recycling of polystyrene waste by pyrolysis using a pilot-scale auger reactor: Process demonstration in a relevant environment

  • Royuela García, David
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
5 figures, 2 tables.-- Supplementary information available., This study presents the pyrolysis of polystyrene waste using a single-auger pyrolysis reactor at an industrially relevant scale, i.e. within the fifth technology readiness level (TRL-5). In order to gain a better understanding of the influence of the main variables involved in this technology, a thorough experimental campaign was performed with PS feed rates of 6 and 9 kg/h, covering a temperature range of 450–600 °C. These variables influence not only the distribution of the products, but also the presence of compounds that may affect the suitability of the pyro-oil for re-polymerisation processes. In this sense, gas chromatography (GC), gas chromatography coupled to mass spectrometry (GC/MS) and simulated distillation (SimDist) of the resulting pyro-oils provided valuable insights into styrene purification. The data collected confirms the strength of the auger reactor for thermochemical recycling of polystyrene waste, and contributes to the future development of the plastics circularity on an industrial scale., This work is part of the SUSCHEMPOL project, financed by the Spanish Ministry of Science and Innovation, State Research Agency (MCIN/AEI/10.13039/501100011033), and by the European Union NextGenerationEU/PRTR. The authors would like to acknowledge the support provided for Project PID2021-123759OB-I00, funded by MICIU/AEI /10.13039/501100011033 and by FEDER, EU, as well as for Project TED2021130093B-C21, funded by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program, as well as the interdisciplinary CSIC platforms SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Corrigendum to “Pursuing the circularity of wind turbine blades: Thermochemical recycling by pyrolysis and recovery of valuable resources” [J. Analy. Appl. Pyrol. 181 (2024) 106657]

  • Royuela García, David
  • Martínez Ángel, Juan Daniel
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • García Martínez, Tomás
  • Verdejo, Raquel
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
The authors regret to inform that there is a small error in the acknowledgements in case it can be corrected. The modification does not affect the technical part of the article nor the projects mentioned, but only the source of funding and format of the acknowledgements. In this sense, the acknowledgements should read: “The authors thank the Government of Aragon (DGA) for the support provided under the program to support research groups. We also thank the funding provided for Project PID2021–123759OB-I00 funded by MICIU/AEI /10.13039/501100011033 and by FEDER, EU for, as well as for Project TED2021–130093B-C21 funded by MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR. In addition, the authors thank the CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir.” The authors would like to apologise for any inconvenience caused., The authors thank the Government of Aragon (DGA) for the support provided under the program to support research groups. We also thank the funding provided for Project PID2021-123759OB-I00 funded by MICIU/AEI /10.13039/501100011033 and by FEDER, EU for, as well as for Project TED2021-130093B-C21 funded by MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR. In addition, the authors thank the CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical recycling of EPDM waste through pyrolysis: Exploring the feasibility of a circular economy model

  • Sanchís, Alberto
  • Veses Roda, Alberto
  • Martínez Ángel, Juan Daniel
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
6 figures, 2 tables.-- Supplementary information available on the editor's website.-- © 2025. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Ethylene propylene diene monomer rubber (EPDM) is widely used in many industrial sectors. EPDM’s physical and chemical properties make it highly durable, flexible and resistant, while posing significant recycling challenges. The development of a circular economy for rubber compounds is a remarkable challenge for the sustainability of this industry, and pyrolysis offers interesting characteristics for the recovery of value-added raw materials from waste EPDM. This process converts EPDM rubber into raw recovered carbon black (RRCB), pyrolysis gas (PyG) and pyrolysis oil (PyO). This work studies the pyrolysis of EPDM in a lab-scale plant with two reactors in series in order to tune the yield and properties of the products to potentiate their value. While the first reactor controls the temperature effect for high quality RRCB production, the second reactor serves to thermally crack the volatiles released. The results show that the RRCB produced has a potential use as substitute for virgin carbon black (CB). Likewise, the PyO can be cracked from linear, cyclic, and heterocyclic hydrocarbon compounds to aromatic ones. In addition, PyG with high C2 and C3 gas content is highly promoted at higher cracking temperatures. This composition of PyG is seen as very promising in promoting circularity within the EPDM industry, as ethylene and propylene are the main basic chemicals for EPDM production. The developed process may serve as a promising approach to sustainable chemical recycling, balancing cost-efficiency with environmental responsibility, notably by reducing the carbon footprint through the use of RRCB as a replacement of conventional CB., The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program. The authors also thank the funding provided by the grant PID2021-123759OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. Authors also thank CSIC for the interdisciplinary thematic platforms SusPlast and SosEcoCir., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pyrolysis-driven chemical recycling: Tailoring kinetics to polymer waste complexity

  • Arenas, Cindy Natalia
  • Betancur, Mariluz
  • Martínez Ángel, Juan Daniel
  • Navarro López, María Victoria
9 figures, 6 tables., Precise kinetic models are required for the chemical recycling of polymer waste by pyrolysis to predict conversion and reaction rates, which are fundamental for developing a reactor model. This study evaluates the pyrolysis kinetics of three polymer wastes of different complexity: end-of-life tires, polyethylene terephthalate, and polystyrene. For this purpose, thermogravimetric data obtained at three different heating rates were analyzed using two complementary approaches: 1) a single-step method combining isoconversional and master plot techniques, and 2) a multi-step distributed activation energy model. This work is crucial because it provides the first systematic comparison of fitted conversion and reaction rate curves against experimental data, filling a gap in the existing literature. The results show that the complexity of the feedstock influences the accuracy of the model: The distributed activation energy model outperforms single-step methods for end-of-life tires and correctly captures their multi-component degradation (complex matrix containing natural and synthetic rubber). On the other hand, Friedman/master plots work better for simpler polymers such as polyethylene terephthalate and polystyrene, which contain ethylene glycol and terephtalic acid, and styrene, respectively. The derived kinetic parameters enable precise description of temperature-dependent reaction progress, and are the first step in reactor design. This work establishes a waste-specific framework for selecting kinetic models, thereby advancing scalable pyrolysis processes., CNA would like to express all their gratitude to MINCIENCIAS (Colombia) for the PhD scholarship (proposals 909/2021). The Spanish National Research Council (CSIC) is also acknowledged for their financial support provided by the i-COOP2022 program (COOPA 22002). The CSIC Interdisciplinary Thematic Platforms (PTI) SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy) are also recognized. The authors would like to thank the Grant PID2021-123759OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future” and the Regional Government of Aragon (DGA) for the support provided through the Research Groups Support Program, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material for Pyrolysis-driven polymer chemical recycling: tailoring kinetics to waste complexity [Dataset]

  • Arenas, Cindy Natalia
  • Betancur, Mariluz
  • Martínez Ángel, Juan Daniel
  • Navarro López, María Victoria
Under a Creative Commons BY-NC 4.0 license., Fig. S1. Experimental TGA data; Fig. S2. Comparison between experimental and modeling data (Friedman method with MP method at 5, 10 and 20 °C/min); Fig. S3. Comparison between experimental and modeling data (DAEM at 5, 10 and 20 °C/min), CNA would like to express all their gratitude to MINCIENCIAS (Colombia) for the PhD scholarship (proposals 909/2021). The Spanish National Research Council (CSIC) is also acknowledged for their financial support provided by the i-COOP2022 program (COOPA 22002). The CSIC Interdisciplinary Thematic Platforms (PTI) SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy) are also recognized. The authors would like to thank the Grant PID2021-123759OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and “ESF Investing in your future” and the Regional Government of Aragon (DGA) for the support provided through the Research Groups Support Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in the circular economy of polystyrene: A critical review of pyrolysis in pilot-scale systems, distillation, and re-polymerization

  • Royuela García, David
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Martínez Ángel, Juan Daniel
16 figures, 5 tables., The widespread use of plastics in many sectors has resulted in the generation of a significant amount of waste, causing major environmental issues. Polystyrene (PS) is one of the most demanded polymers nowadays. Therefore, a consistent recycling pathway must be established to transition to a circular economy strategy. Pyrolysis of PS can recover styrene monomer (SM) in a liquid fraction that can be used to make new plastics. This replaces the need for fossil-based styrene and creates a circular economy. Although literature on this technology exists at the laboratory scale, advancing it to the pilot scale and beyond is crucial for its near-term deployment. Thus, this review compiles pilot-scale pyrolysis studies of PS and provides the industrial potential of each examined technology. It also emphasizes the need to implement a pyro-oil purification process via distillation, which has been demonstrated to achieve a purity level of over 99 wt% for SM. The potential for producing new PS products with comparable properties to conventional ones using the recovered styrene (r-styrene) in the so-called re-polymerization process is also addressed. Some research gaps, challenges and future perspectives are also outlined. Among others, distillation and re-polimerization on pilot-scales are necessary to be demonstrated to endorse the potential benefits of PS pyrolysis-based recycling. In-depth life cycle assessments (LCAs) using industrially relevant data are also expected in the future. This comprehensive analysis of the PS circular economy cycle through pyrolysis, distillation and re-polymerization is expected to boost the deployment of industrial-scale plants., The authors would like to acknowledge the support provided for the following projects: PLEC2021–007793 (Suschempool), funded by Ministry of Science and Innovation; PID2021-123759OB-I00 funded by MICIU/AEI/10.13039/501100011033 and “ESF Investing in your future” and TED2021-130093B-C21 funded by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. The authors also thank the Regional Government of Aragon (DGA) for the support provided under the research group support program, as well as the interdisciplinary CSIC platforms SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Recover: Advancements in tire waste management—from collection to disposal and beyond

  • Martínez Ángel, Juan Daniel
  • Veses Roda, Alberto
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
End-of-life tires (ELTs) are the main source of rubber waste. ELTs are a major concern for the tire industry because they are manufactured with high physical and chemical properties to withstand severe rolling conditions between the vehicle and the road. Although they are no longer used for transportation, they are still a valuable source of secondary raw materials (SRM) that need to be recovered to meet sustainability goals. This work presents the status of ELTs in some developed and developing countries, considering generation rates and recovery processes. It also distinguishes the current recycling paths for ELTs based on the options for plastic waste. Among the many recycling processes, pyrolysis is considered to be a thorough, efficient, and environmentally friendly technology because it breaks down ELTs into their building blocks, including the carbon black, in such a way that can be used as SRM. The complete recycling of ELTs through pyrolysis alleviates the scarcity of fossil resources, with a positive impact on the circular economy and carbon neutrality. Important European projects focusing on circular economy strategies based on pyrolysis are also highlighted, as well as some examples of industrial-scale pyrolysis plants worldwide., The authors would like to thank the Regional Government of Aragon (DGA) for the support provided through the Research Groups Support Program and MINECO for their financial support (Project PID2021-123759OB-I00 and Project TED2021-130093B-C21). The CSIC Interdisciplinary Thematic Platforms (PTI) SusPlast (Sustainable Plastics) and SosEcoCir (Sustainability and Circular Economy) are also recognized., Peer reviewed