Pasar al contenido principal

MEJORANDO LA CIRCULARIDAD DEL NEUMATICO: UNA APROXIMACION HOLISTICA DE RECICLADO DE CIRCUITO CERRADO

PID2023-147542OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Segmented Polyurethanes Based on Adipate and Sebacate Biodegradable Polyesters for Use as Nerve Guide Conduits in Peripheral Nerve Regeneration

  • Sabido-Barahona, Alexis B.
  • Vargas-Coronado, Rossana F.
  • Hernández-Sánchez, Fernando
  • Martínez-Richa, Antonio
  • Cauich-Rodríguez, Juan V.
  • Marcos-Fernández, Angel
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This study investigated the chemical, thermal, and mechanical properties of segmented polyurethanes (SPUs) synthesized using less common biodegradable polyester polyols, specifically poly(adipate) (PAD) and poly(sebacate) (PSC), to evaluate their potential as nerve guidance conduits (NGCs) in peripheral nerve regeneration. The synthesis of novel 4,4 ' methylene-bis-cyclohexyl diisocyanate (HMDI) SPUs was conducted in a two-step process: prepolymer formation and chain extension with 1,4-butanediol (BO) or 1,4-butanediamine (BA). SPUs were synthesized with two molar ratios-polyol:HMDI:BA/BO at 1:2:1 and 1:3:2 for the PAD:HMDI:BA system-to optimize mechanical properties. 1HRMN analysis verified the expected chemical structure of SPUs, whereas Raman and IR spectroscopy confirmed successful polyurethane synthesis. X-ray diffractograms showed that PAD-based SPUs (SPUPAD) were amorphous while PSC-based SPUs (SPUPSC) exhibited semi-crystalline behavior. SPUPAD showed only one degradation stage by TGA, while DSC showed one thermal event. In contrast, SPUPSC exhibited two degradation stages and three thermal events that confirmed phase separation. The longitudinal tensile properties of an NGC fabricated from SPUA-PAD-2 (PAD:HMDI:BA (1:3:2)) after 30 days of immersion in water (25 degrees C) showed a lower modulus (4.46 +/- 0.5 MPa) than native intact nerves (15.87 +/- 2.21 MPa) but a similar modulus to extracted nerves (8.19 +/- 7.27 MPa). This system exhibited a longitudinal tensile force of 11.1 +/- 1.6 N, which is lower than that of peripheral nerves (19.85 +/- 7.21 N) but higher than that of commercial collagen-based nerve guide conduits (6.89 +/- 2.6 N). The observed properties suggest that PUA-PAD-2 has potential as a biomaterial for nerve regeneration applications., This work was supported by the Consejo Nacional de Ciencia y Tecnologia (CONACYT) Mexico (Project 1360 and 248378), and by Ministerio de Ciencia, Innovacion y Universidades, Spain (MCIN/AEI /10.13039/501100011033, Grants PID2023-147542OB-I00 and PID2019-106099RB-C41). The authors gratefully acknowledge Patricia Quintana, Daniel Aguilar Treviño, Wilian Cauich, and Santiago González for the XRD, XPS and DSC experiments at Laboratorio Nacional de Nano y Biomateriales (LANNBIO) Cinvestav-IPN, Unidad Mérida (Project 322758). J.L.G.-R. acknowledges the support provided by CIBER Consorcio Centro de Investigación Biomédica en Red CIBER_BBN CB06/01/1026, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manifestation of Rouse and Entanglement Dynamics in Non-Cross-Linked and Cross-Linked Polymers Studied by Field-Cycling and Multiple Quantum NMR

  • Becher, M.
  • Martín Salamanca, Fernando
  • Valentín, Juan L.
  • Saalwächter, K.
  • Rössler, E. A.
Rubbers prepared from technical poly(butadiene) and natural poly(isoprene) are studied by field-cycling (FC) 1H NMR relaxometry to elucidate the changes of the relaxation spectrum. Starting with the non-cross-linked polymer successively cross-links are introduced via sulfur or peroxide vulcanization. Applying an advanced home-built relaxometer allows one to probe entanglement dynamics in addition to Rouse dynamics. We show that entanglement dynamics evidenced in terms of a characteristic power-law in the NMR susceptibility is still observed with an exponent identical to that in non-cross-linked linear polymers. Yet, the entanglement regime disappears more and more from the accessible frequency window upon increasing the cross-link density and a spectrally enlarged Rouse regime is revealed. Adding a swelling agent, the manifestation of the Rouse and entanglement regimes virtually does not change, yet, the apparent power-law exponents increase. Concomitant multiple-quantum (MQ) 1H NMR experiments provide information on the structure of the rubber network in terms of the residual dipolar coupling and the fraction of the network defects, i.e., persisting entangled or nonentangled chains, introduced upon cross-linking and swelling., The work was supported by the Deutsche Forschungsgemein- schaft (DFG) through the grant RO/907-22. We appreciate valuable comments by Nail Fatkullin. F.M.S. and J.L.V. thank the Spanish Ministry of Science and Innovation (MINECO) for the funding received under grants PID2020-119047RB-I00, PLEC2021-007793 and PID2023-147542OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental Design (2⁴) to Improve the Reaction Conditions of Non-Segmented Poly(ester-urethanes) (PEUs) Derived from α,ω-Hydroxy Telechelic Poly(ε-caprolactone) (HOPCLOH)

  • Maldonado-Estudillo, Jaime
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Dios Caputto, María Dolores de
  • Cruz-Jiménez, Gustavo
  • Báez-García, José Eduardo
Aliphatic unsegmented polyurethanes (PUs) have garnered relatively limited attention in the literature, despite their valuable properties such as UV resistance and biocompatibility, making them suitable for biomedical applications. This study focuses on synthesizing poly(ester-urethanes) (PEUs) using 1,6-hexamethylene diisocyanate and the macrodiol α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH). To optimize the synthesis, a statistical experimental design approach was employed, a methodology not commonly utilized in polymer science. The influence of reaction temperature, time, reagent concentrations, and solvent type on the resulting PEUs was investigated. Characterization techniques included FT-IR, <sup>1</sup>H NMR, differential scanning calorimetry (DSC), gel permeation chromatography (GPC), optical microscopy, and mechanical testing. The results demonstrated that all factors significantly impacted the number-average molecular weight (<i>M</i><sub>n</sub>) as determined by GPC. Furthermore, the statistical design revealed crucial interaction effects between factors, such as a dependence between reaction time and temperature. For example, a fixed reaction time of 1 h, with the temperature varying from 50 °C to 61° C, did not significantly alter <i>M</i><sub>n</sub>. Better reaction conditions yielded high <i>M</i><sub>n</sub> (average: 162,000 g/mol), desirable mechanical properties (elongation at break > 1000%), low levels of unreacted HOPCLOH in the PEU films (OH/ESTER response = 0.0008), and reduced crystallinity (Δ<i>H</i><sub>m</sub> = 11 J/g) in the soft segment, as observed by DSC and optical microscopy. In contrast, suboptimal conditions resulted in low <i>M</i><sub>n</sub>, brittle materials with unmeasurable mechanical properties, high crystallinity, and significant amounts of residual HOPCLOH. The best experimental conditions were 61 °C, 0.176 molal, 8 h, and chloroform as the solvent (ε = 4.8)., Consejo Nacional de Humanidades Ciencia y Tecnología (CONAHCYT) CF-2023-I-2233 and Sistema Nacional de Investigadores (SNI 2). J.M.-E. thanks the CONAHCYT for the scholarship (No. 782319); European Fund under the ERASMUS-EDU-2022-PI-ALL-INNO-BLUEPRINT project, reference number 101103234 (ChemSkills) and the Ministry of Science, Innovation and Universities for the funding received through the PID2023-147542OB-I00, CPP2023-010769 grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Proteins on the Network Formation and Degradation of Peroxide Cross-Linked Natural Rubber Elucidated by Time-Domain NMR

  • Nimpaiboon, Adun
  • González-Jiménez, Antonio
  • Pérez-Aparicio, Roberto
  • Martín-Salamanca, Fernando
  • Zepeda Rodríguez, Z.
  • Valentín, Juan L.
  • Sakdapipanich, Jitladda
The importance of sustainable polymers has increased greatly in the last years since most polymers are derived from non-renewable sources. Sustainable polymers (i.e., biopolymers) such as natural rubber (NR) are proposed as a solution for this concern. A comparative study between NR and deproteinized NR (DPNR) was carried out to elucidate the role of proteins on the network formation and degradation of peroxide cross-linked NR using time-domain NMR experiments. The 1H multiple-quantum (MQ) NMR experiments provided information on the cross-link density and its spatial distribution, while the actual fraction of non-coupled network defects was obtained by exploiting the Hahn echo approach measured on swollen samples. The results showed that proteins influenced the network formation during the vulcanization process of NR, leading to a higher number of non-elastic network defects and promoting the creation of additional cross-links with a broader spatial distribution. The formation of network heterogeneities in different length scales deeply influences the mechanical properties of NR samples. On the other hand, the proteins showed a pro-oxidant activity on the degradation behavior by accelerating the degradation process of peroxide cross-linked NR., The authors would like to acknowledge the Faculty of Science, Mahidol Uni- versity, the Center of Excellence for Innovation in Chemistry (PERCH-CIC), Ministry of Higher Education, Science, Research, and Innovation. Sincere appreciation is extended to the Thai Rubber Latex Corporation (Thailand) Public Co., Ltd., for supplying the NR samples. The authors also acknowledge the Spanish Ministry of Science and Innovation (MINECO) (PID2020-119047RB-I00, PLEC2021-00779 and PID2023-147542OB-I00) and the Mahidol University and the National Research Council of Thailand: (NRCT5-TRG63009-09) for the partial financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Métodos de RMN en el dominio del tiempo aplicados al estudio de estructura y dinámica molecular en cauchos

  • Salamanca, F. M.
  • Montero Escrivá, Marina
  • Diñeiro García, Laura
  • Zepeda Rodríguez, Z.
  • Fernández Torres, A.
  • Herrero Calderón, Rebeca
  • Valentín, Juan L.
  • Navarro Crespo, Rodrigo
Ejemplar dedicado a: innovaciones en polímeros, La elasticidad de los compuestos de caucho viene determinada por los parámetros moleculares que definen la estructura de la red. Se han aplicado diversas técnicas experimentales para obtenerlos. Los experimentos de Múltiple Coherencia Cuántica de Resonancia Magnética Nuclear (MQ-RMN) permiten caracterizar la estructura molecular de los materiales de caucho basándose en la función de correlación y la relajación spin-spin. El acoplamiento dipolar residual es el principal observable que cuantifica la densidad de restricción a nivel molecular. Este enfoque también es sensible a la fracción no elásticamente activa del material, es decir, la fracción de defectos. La dinámica molecular puede evaluarse directamente midiendo la velocidad de relajación de la red de spin en un amplio rango de frecuencias de Larmor. Utilizando un relaxómetro casero y aplicando el principio de superposición frecuencia-temperatura, se revelan espectros de relajación que cubren unos diez órdenes de magnitud en frecuencia. Se interpretan en términos de dinámica de Rouse y de entrelazamientos., The elasticity of rubber compounds is determined by the molecular parameters that define the network structure. Various experimental techniques have been applied to obtain these parameters. Multiple Quantum Nuclear Magnetic Resonance (MQ-NMR) experiments allow us to characterize the average molecular structure of rubber materials based on the correlation function and spin-spin relaxation. The residual dipolar coupling is the main observable that quantifies the constraint density at a molecular level. This approach is also sensitive to the non-elastically active fraction of material, i.e., the fraction of defects. Field cycling NMR has been widely applied to study polymers. Molecular dynamics can be directly probed by measuring the spin-lattice relaxation rate over a wide range of Larmor frequencies. Using a home-built relaxometer and appealing to frequency-temperature superposition, relaxation spectra which cover about ten decades in frequency are revealed. They are interpreted in terms of Rouse and entanglement dynamics., Los autores agradecen al Ministerio de Cien- cia e Innovación (MICINN) por la financiación recibida a través de los siguientes proyectos: PID2020-119047RB-I00, PLEC2021-007793 y PID2023-147542OB-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ester-urethanes) derived from poly(ε-caprolactone) macrodiols: Effect of the molar ratios using design of experiments, synthesis, and characterization

  • Maldonado-Estudillo, Jaime
  • Cruz-Jiménez, Gustavo
  • Estévez, Miriam
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • González, Gerardo
  • Ramírez-Hernández, Aurelio
  • Báez, José E.
In this study, a randomized complete block design was established to compare three different molar ratios and assess their influence on various properties of a series of poly(ester-urethane)s (PEUs). Different molar ratios of 1,6-hexamethylene diisocyanate (HDI) to α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) (also called macrodiol) were investigated: 1.14:1, 1.05:1 and 1:1. The results showed that the 1.14:1 molar ratio produced PEUs with a high number-average molar mass (M<inf>n</inf>), the lowest residual hydroxyl content, and the highest urethane formation. Additionally, a significant decrease was observed in the enthalpy of fusion (ΔH<inf>m</inf>) of the soft segment for the 1.14:1 and 1.05:1 molar ratios, suggesting the presence of physical crosslinking between ester and urethane groups. Several significant correlations between the mechanical properties and M<inf>n</inf> were identified. The chemical nature of the PEUs was confirmed by different analytical techniques., Jose E. Baez acknowledges the funding provided by the Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) Ciencia Basica and Ciencia de Frontera for the grant “Proyecto SEP/ 284893”, “CF-2023-I-2233” and “CONAHCYT-SENER 177007”. Additionally, Rodrigo Navarro and Angel Marcos-Fernández also thank to Ministry of Science, Innovation and Universities for the funding received through the PID2023-147542OB-I00, and CPP2023-010769 grants. Jaime Maldonado-Estudillo thanks to CONAHCYT for a gradu- ate scholarship (No. 782319), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable Polyurethanes for Tissue Engineering: Influence of L-Lactide Content on Degradation and Mechanical Properties

  • Rubio Hernández-Sampelayo, Alejandra
  • Diñeiro García, Laura
  • González-García, Dulce M.
  • Martínez Campos, Enrique
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
The influence of L-lactide content (between 15% and 43%) on the degradation of biodegradable polyurethanes (PUs) for tissue engineering was systematically addressed in this study. An ideal tissue scaffold should exhibit a mechanical response and degradability appropriate for the host tissue. To achieve it, polyols containing ε-caprolactone and L-lactide moieties were used, with the random distribution of lactide units disrupting the regularity, and hence the crystallinity, of poly(caprolactone) segments, facilitating their degradation. The biodegradable PUs were synthesised using these copolymers as soft segments and were characterised through various physicochemical techniques, including bioassays and water absorption measurements. It was determined that mechanical behaviour and water absorption depended significantly on molecular weight, L-lactide content in the soft segment, and the crystallinity of the hard segment. Additionally, two types of chain extenders were also evaluated: hydrolysable and non-hydrolysable. PUs based on hydrolysable chain extenders achieved higher molecular weights and exhibited better mechanical performance than their non-hydrolysable counterparts. To assess the cytocompatibility of these materials, an endothelial model was used, involving metabolic activity and DNA content analysis. The results demonstrated good cell adhesion and the absence of toxicity, confirming the viability of cell growth on the surfaces of these biodegradable PUs. The PUs developed in this study exhibited a low initial modulus and adjustable mechanical properties, highlighting their potential application in tissue engineering as biodegradable and biocompatible biomedical materials., This research was partially funded by the European Union (ChemSkills grant number ERASMUS-EDU-2022-PI-ALL-INNO) and the Spanish Ministry of Science and Innovation (MINECO) grant number PID2023-147542OB-I00 and CPP2023-010769 and Consejo Superior de Investigaciones Científicas (CSIC) grant number IMOVE24205., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segmented Polyurethanes Based on Adipate and Sebacate Biodegradable Polyesters for Use as Nerve Guide Conduits in Peripheral Nerve Regeneration

  • Sabido Barahona, Alexis B.
  • Vargas-Coronado, Rossana Faride
  • Hernández-Sánchez, Fernando
  • Martínez-Richa, Antonio
  • Gómez Ribelles, José L.
  • Cauich-Rodríguez, Juan V.
  • Marcos-Fernández, Angel
This study investigated the chemical, thermal, and mechanical properties of segmented polyurethanes (SPUs) synthesized using less common biodegradable polyester polyols, specifically poly(adipate) (PAD) and poly(sebacate) (PSC), to evaluate their potential as nerve guidance conduits (NGCs) in peripheral nerve regeneration. The synthesis of novel 4,4′ methylene-bis-cyclohexyl diisocyanate (HMDI) SPUs was conducted in a two-step process: prepolymer formation and chain extension with 1,4-butanediol (BO) or 1,4-butanediamine (BA). SPUs were synthesized with two molar ratios—polyol:HMDI:BA/BO at 1:2:1 and 1:3:2 for the PAD:HMDI:BA system—to optimize mechanical properties. 1HRMN analysis verified the expected chemical structure of SPUs, whereas Raman and IR spectroscopy confirmed successful polyurethane synthesis. X-ray diffractograms showed that PAD-based SPUs (SPUPAD) were amorphous while PSC-based SPUs (SPUPSC) exhibited semi-crystalline behavior. SPUPAD showed only one degradation stage by TGA, while DSC showed one thermal event. In contrast, SPUPSC exhibited two degradation stages and three thermal events that confirmed phase separation. The longitudinal tensile properties of an NGC fabricated from SPUA-PAD-2 (PAD:HMDI:BA (1:3:2)) after 30 days of immersion in water (25 °C) showed a lower modulus (4.46 ± 0.5 MPa) than native intact nerves (15.87 ± 2.21 MPa) but a similar modulus to extracted nerves (8.19 ± 7.27 MPa). This system exhibited a longitudinal tensile force of 11.1 ± 1.6 N, which is lower than that of peripheral nerves (19.85 ± 7.21 N) but higher than that of commercial collagen-based nerve guide conduits (6.89 ± 2.6 N). The observed properties suggest that PUA-PAD-2 has potential as a biomaterial for nerve regeneration applications., This work was supported by the Consejo Nacional de Ciencia y Tecnología (CONACYT) México (Project 1360 and 248378), and by Ministerio de Ciencia, Innovación y Universidades, Spain (MCIN/AEI /10.13039/501100011033, Grants PID2023-147542OB-I00 and PID2019-106099RB-C41)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of Artificial Neural Networks for Recycled Pellets Identification: Polypropylene-Based Composites

  • Gómez-Bacab, Maya T.
  • Quezada-Campos, Aldo L.
  • Patiño-Arévalo, Carlos D.
  • Zepeda Rodríguez, Z.
  • Romero-Cano, Luis A.
  • Zárate-Navarro, Marco A.
This article belongs to the Special Issue Artificial Intelligence in Polymers., Polymer recycling is challenging due to practical classification difficulties. Even when the polymer matrix is identified, the presence of various polymeric composites complicates their accurate classification. In this study, Fourier-transform infrared spectroscopy (ATR-FTIR) was used in combination with artificial neural networks (ANNs) to quantitatively predict the mineral filler content in polypropylene (PP) composites. Calibration curves were developed to correlate ATR-FTIR spectral features (600–1700 cm−1) with the concentration (wt.%) of three mineral fillers: talc (PP-Talc), calcium carbonate (PP-CaCO3), and glass fiber (PP-GF). ANN models developed in MATLAB 2024a achieved prediction errors below 7.5% and regression coefficients (R2) above 0.98 for all filler types. The method was successfully applied to analyze a commercial recycled pellet, and its predictions were validated by X-ray fluorescence (XRF) and energy-dispersive X-ray spectroscopy (EDX). This approach provides a simple, rapid, and non-destructive tool for non-expert users to identify both the type and amount of mineral filler in recycled polymer materials, thereby reducing misclassification in their commercialization or quality control in industrial formulations., Z.Z.-R. acknowledges partial funding from the Spanish Ministry of Science and Innovation (PID2023-147542OB-I00) to analyze the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transformaciones verdes en la industria asfáltica: El uso del polvo de neumático y el RARx hacia la economía circular

  • Martín Salamanca, Fernando
  • Sanz Coll, Miguel Ángel
  • Mariscal Campos, Ramón
  • Zepeda Rodríguez, Z.
  • Montero Escrivá, Marina
  • Diñeiro García, Laura
  • Valentín, Juan L.
  • Navarro Crespo, Rodrigo
Ejemplar dedicado a: sostenibilidad, reciclado y valorización, CIRTEC y el Grupo de Elastómeros del CSIC han desarrollado dos declaraciones ambientales de producto (DAP) clave para las mezclas asfálticas del futuro. La primera evalúa el polvo de neumático al final de su vida útil (NFVU), material clave en la industria del caucho. La segunda se centra en el RARx, un producto innovador que combina polvo de NFVU, betún y otros aditivos de origen mineral, revolucionando el sector asfáltico al integrar NFVU en estas aplicaciones por primera vez. Para elaborar estos documentos, se analizó el ciclo de vida del NFVU y el RARx mediante pruebas de laboratorio y cálculos de huella de carbono. La inclusión de material reciclado en asfaltos redujo los costes de producción y disminuyó emisiones y, con el RARx, impulsa la pavimentación asfáltica hacia una economía circular sin residuos., CIRTEC and the Elastomers Group of CSIC have developed two key environmental product declarations (EPDs) for the asphalt mixtures of the future. The first evaluates end-of-life tyre powder (ELTp), a key material in the rubber industry. The second focuses on RARx, an innovator product that combines ELTp, bitumen and other mineral-based additives, revolutionising the asphalt industry by integrating ELTp into these applications for the first time. To produce these documents, the life cycle of ELTp and RARx was analysed through laboratory tests and carbon footprint calculations. The inclusion of recycled material in asphalts reduced production costs and emissions and, with RARx, drives asphalt paving towards a waste-free circular economy, Los autores agradecen al Ministerio de Ciencia e Innovación (PID2023-147542OB-I00) por la financiación recibida. El grupo de Elastó- meros pertenece a SUSPLAST, plataforma in- terdisciplinar del CSIC. MME agradece al CSIC por la financiación JAE ICU 23 00226, ICTP- 02 y al Ministerio de Ciencia e Innovación por el contrato PTA2023-022994-I. LDG agradece al CSIC por la financiación IMOVE24205.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Effect of the Recycling Process on the Performance of Thermoplastic Vulcanizates Containing Recycled Rubber from End-of-Life Tires

  • Narváez-Fagoaga, Maialen
  • Montero Escrivá, Marina
  • Zepeda Rodríguez, Z.
  • Diñeiro, Laura
  • Salamanca, Fernando M.
  • Marcos-Fernández, Ángel
  • Valentín, Juan L.
This article belongs to the Special Issue Advances in Rubber Composites and Recovered Waste Rubber., End-of-life tires (ELTs) are an important source of energy and materials, with ELT powder (ELTp) being a secondary raw material of increasing industrial interest. However, the complex structure and composition of ELTp rubber pose technological difficulties and scientific challenges in some high-performance applications in the rubber industry. The mechanical recycling of ELTp produces ground tire rubber (GTR) powder, which is used, among other applications in the rubber field, to prepare thermoplastic vulcanizates (TPVs) due to the interest in these materials in the automotive and construction sectors. Over the last few decades, different approaches have been explored to minimize the limitations of these TPVs, including their large particle size and poor compatibility with GTR powder in other polymer matrices. This study applies different recycling procedures to GTR powder, based on thermal, chemical and mechanical methods, and combinations thereof, to minimize interfacial issues with other matrices used in TPV preparation. The effect of the different rubber recycling processes on the performance of the resulting TPVs was evaluated, optimizing the fraction of recycled rubber from ELTp and the vulcanization system to enhance the mechanical properties and obtain industrially competitive products., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) under grants PID2020-119047RB-I00, PLEC2021-00779, and PID2023-147542OB-I00 and the EU under the program ERASMUS-EDU-2022-PI-ALL-INNO-BLUEPRINT, project 101103234., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical upcycling of complex PET waste: Upcycling of milder reaction conditions and use for polyurethane as added-value product

  • Nava, Miriam Paola Barrera
  • de Dios Caputto, María Dolores
  • Navarro Crespo, Rodrigo
  • Torres, Alberto Fernández
  • Martínez-Richa, Antonio
  • Marcos-Fernández, Ángel
This study presents an efficient chemical upcycling route for complex poly(ethylene terephthalate) (PET) waste, including post-consumer bottles, thermoform PET, and the glycolysed monomer bis(2-hydroxyethyl) terephthalate (BHET), transforming them into liquid polyols for the synthesis of polyurethanes. The strategy is based on a catalysed solvolysis using ethylene carbonate (EC) as both a reagent and solvent, operating under mild conditions and at atmospheric pressure. A systematic screening demonstrated that caesium carbonate (Cs<inf>2</inf>CO<inf>3</inf>) is more efficient catalyst than KOH, as it minimises the hydrolysis of carbonate groups, thereby yielding polyols with a higher content of these valuable units. Kinetic studies revealed the critical importance of reaction time and the transition from a heterogeneous to a solvated and highly swollen polymer state. The resulting polyols, with controlled molecular weights in the range of 1000–2500 g/mol —appropriate for use as soft segments— were successfully employed in the synthesis of polyurethanes. The final materials exhibited high molecular weights and thermal properties that correlate with the chemical composition of the precursor polyol, validating this methodology as a versatile and sustainable alternative to advance towards a circular economy., The authors gratefully acknowledge the financial support from the European Union (ChemSkills grant number ERAMUS-EDU-2022-PI-ALL INNO) and Spanish Ministry of Science and Innovation (MINECO) (grant numbers PID2023-147542OB-I00 and CPP2023-010769). MDdC also acknowledges the Comunidad de Madrid for the predoctoral grant PIPF 2022/ECO-24517 and Consejo Superior de Investigaciones Científicas (CSIC) for additional funding under project IMOVE23133. MPBN ac knowledges the financial support provided by the Consejo Nacional de Humanidades, Ciencia y Tecnología (CONACYT, Mexico) for the grant (No. 926303), the Dirección de Apoyo a la Investigación y al Posgrado (DAIP), and the Universidad de Guanajuato., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reciclado químico de poliuretanos: estado del arte actual y perspectivas

  • Diñeiro García, Laura
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
El principal problema de los plásticos en ge neral, y de los poliuretanos en particular, es el tratamiento de los residuos posconsumo que, con frecuencia, se descartan en vertederos o se destinan a la recuperación energética a través de su incineración. Actualmente, hay numerosas tecnologías con las que es posible dar una segunda vida útil a estos productos y reducir el impacto medioambiental de una industria que no deja de crecer; la más im portante es el reciclado químico. En este artí culo se analizan en profundidad las distintas vías de reciclado a las que se pueden someter los residuos de poliuretano, y se pone sobre la mesa una cuestión que puede cambiar el paradigma del reciclado químico: la realidad de que este método de producción de ma terias primas secundarias completa el círculo de vida de los poliuretanos, contribuye a la sostenibilidad y tiene una importancia signifi cativa para la economía circular global., The main concern regarding plastics in gene ral, and polyurethanes in particular, is waste treatment; more often than not, polyurethane goods are discarded after their use and end up in landfills or meet their end in the energy Palabras clave: reciclado químico, econo mía circular, materias primas secundarias, glicólisis, hidrólisis, sostenibilidad. recovery sector through incineration. Today, there are numerous technologies that can be used to give these products a second life and reduce the environmental impact of an ever growing industry, the most important of which is undoubtedly chemical recycling. This article takes an in-depth look at the different recy cling routes that polyurethane waste can be subjected to, and discusses an issue that can change the paradigm of chemical recycling: the knowledge that this particular method of secondary raw material production completes the circle of the life of polyurethanes, con tributes to sustainability and is of significant importance for the global circular economy., Los autores agradecen el apoyo económi co prestado por ChemSkills y la UE (ERAS MUS-EDU-2022-PI-ALL-INNO), y por el Ministerio de Ciencia, Innovación y Univer sidades (PID2020-119047RB-I00, PID2023 147542OB-I00, y PLEC2021-007793)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Gamma Radiation on the Chemical Structure and Physical Properties of Poly(butylene adipate-co-terephthalate)

  • Marcos-Ríos, Daniel
  • Atrous, Mohammed Amine
  • Belhaoues, Abderrahmane
  • Burillo, Guillermina
  • Navarro, Rodrigo
  • Marcos-Fernández, Ángel
This study presents the effect of gamma rays of up to 2000 kGy on the chemical structure and the physical properties of a poly(butylene adipate-co-terephthalate) (PBAT) with 48% mol of terephthalic units. PBAT is a polymer with properties similar to polyethylene (PE) but it is biodegradable and not toxic to the environment, and it can be prepared with a renewable content of up to 68.6% weight, with uses in biomedicine and packaging. Previous studies found in the literature have been conducted using low doses and the results were contradictory. The results for gel content and crosslinking efficiency were in agreement with the results found in the literature. Molecular weight decreased and widened with the increase in dose. Proton NMR analysis was used for the first time in PBAT to determine the changes in chemical species, the formation of new chemical species, and the bonds more susceptible to be broken by gamma rays. Both thermal and mechanical properties were explained by the scission of the chains in the amorphous phase and at the boundaries of the crystallites. The thermal parameters most affected by irradiation were the crystallization temperature and temperature of melting after cooling from the melt. Stress and strain at break suffered a continuous decrease with dose until PBAT became fragile at high dose., This research was partially funded by the European Union (ChemSkills; grant number ERASMUS-EDU-2022-PI-ALL-INNO), the Spanish Ministry of Science and Innovation (MINECO), grant numbers PID2023-147542OB-I00 and CPP2023-010769, and the Universidad Autónoma de México (Mexico), grant number DGAPA UNAM IN201025., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradación de poliuretanos: enzimas y microorganismos para un reciclado sostenible

  • Marcos-Ríos, Daniel
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
Actualmente, la degradación de poliuretanos se basa en métodos fisicoquímicos que son poco sostenibles con el medioambiente. La biodegradación es un proceso de reciclado terciario que hace uso de microorganismos o sus componentes para romper las cadenas poliméricas de los poliuretanos. Durante las últimas cuatro décadas, se han realizado varios estudios con cepas microbianas bacterianas y fúngicas, así como varios experimentos con enzimas que han demostrado potencial para poder ser utilizadas en procesos industriales. Si bien actualmente ninguno de los organismos o componentes mencionados se utiliza industrialmente, es de suma importancia desarrollar estas metodologías para poder ofrecer una alternativa sostenible a las actuales. En este artículo, se hace un repaso de la situación pasada y presente de estas investigaciones y se proponen algunas directrices sobre las que poder avanzar en el futuro, para así ofrecer la biodegradación de poliuretanos como una alternativa industrialmente viable y sostenible., Currently, the degradation of polyurethanes is based on physicochemical methods that are environmentally unsustainable. Biodegradation is a tertiary recycling process that makes use of microorganisms or their components to break down the polymeric chains of polyurethanes. Over the last four decades, several studies have been conducted with bacterial and fungal microbial strains, as well as several experiments with enzymes that have shown potential for use in industrial processes. Although none of the mentioned organisms or components are currently used industrially, it is of utmost importance to develop these methodologies in order to offer a sustainable alternative to the current ones. In this article, we review the past and present status of this research and propose some guidelines on which to advance in the future in order to offer biodegradation of polyurethanes as an industrially viable and sustainable alternative., Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades de España el apoyo financiero (PID2023-147542OBI00, CPP2023-010769) y al Consejo Superior de Investigaciones Científicas el proyecto (202460E171).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Curing-temperature-dependent network structure and mechanical properties of sulfur-crosslinked nitrile butadiene rubber studied by 1H MQ-NMR, swelling, and rheometry

  • Hufnagl, Margarete
  • Gehling, Tobias
  • Azevedo, Maurício
  • Kerschbaumer, Roman C.
  • Pinter, Gerald
  • Fasching, Michael A.
  • Schwarz, Thomas
  • Salamanca, Fernando M.
  • Valentín, Juan L.
This study investigates the relationship between network characteristics and mechanical properties in sulfur-crosslinked Nitrile Butadiene Rubber (NBR) applying various methods for network and mechanical characterization. Results indicate a clear correlation between transmitted torque and crosslink density, with both decreasing by approximately 13% as curing temperature rises from 150 °C to 170 °C. Multiple-quantum nuclear magnetic resonance (MQ-NMR) spectroscopy confirmed this trend, though with a less pronounced reduction. Mechanical testing showed consistent reductions in tensile strength, compressive force, and energy dissipation at higher curing temperatures. Fatigue resistance, however, significantly increased, with crack growth slowing by up to 22 times in samples cured at 180 °C. The results demonstrate that curing temperature significantly alters the balance between network structure and mechanical performance in sulfur-crosslinked NBR and that rheometric, swelling-based, and MQ-NMR-based descriptors provide complementary information for understanding these effects., This research project (grant number: 911658) was funded by COMET – Competence Centers for Excellent Technologies – through BMIMI, BMWET, and the co-financing federal provinces (Styria through SFG, Upper Austria, Vorarlberg) and carried out with the participation of scientific and company partners. The COMET program is managed by FFG. Authors FMS and JLV thank the Spanish Ministry of Science and Innovation (MINECO) under grant PID2023-147542OB-I00. Authors F. M.S and J.L.V. are members of the SusPlast platform from the Spanish National Research Council (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigating filler-rubber interactions and amplification effect in reinforced elastomers

  • Martín Salamanca, Fernando
  • Narvaez-Fagoaga, M.
  • Montero-Escrivá, M.
  • Zepeda-Rodríguez, Z.
  • Tunnicliffe, Lewis B.
  • Valentín, Juan L.
Rubber represents one of the most important classes of polymers in modern industry due to its unique elastic properties. To satisfy the demanding technical requirements of industrial applications, solid (nano-)particles are often incorporated into the rubber matrix, leading to a reinforcement effect that enhances the mechanical performance of these materials. Rubber reinforcement theories establish quantitative relationships between the macroscopic mechanical properties and the molecular parameters that define the structure of rubber compounds. Nevertheless, quantification of all the structural parameters that define the reinforcement mechanism in rubber materials is still a complex challenge due to the number of parameters and their interrelation in the measurable physical properties. In this work, a new methodology based on the combination of uniaxial mechanical testing under quasi-static conditions and solid-state proton multiple-quantum nuclear magnetic resonance (<sup>1</sup>H MQ-NMR) is proposed to quantify all molecular parameters involved in the rubber reinforcement phenomenon. The achievement of this goal requires an extension of the current theory, to establish a common physical framework between the experimental approaches and to develop a novel combined analysis protocol. Finally, independent experiments based on strain sweep test (Payne effect) and selective cleavage of sulfur cross-links using chemical probes, have been employed to validate the proposed methodology, demonstrating strong agreement and internal consistency among all results. This study highlights the critical importance of including the amplification effects (strain and stress) on the reinforcement theory, which has been shown to play a decisive role in determining key molecular parameters, including the number of crosslinks, entanglements and filler–rubber interactions., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) under grants PID2020-119047RB-I00, PLEC2021- 00779, and PID2023-147542OB-I00 and the EU under the program ERASMUS-EDU-2022-PI-ALL-INNO-BLUEPRINT, project 101103234. MNF acknowledges the Spanish Ministry of Science and Innovation (MINECO) for her PhD grant PREP2023-001425. FMS thanks Dr. Michael Lang for fruitful discussions and IPF for his postdoctoral guest stay. All authors from ICTP-CSIC are also members of the SusPlast platform from the Spanish National Research Council (CSIC)., Peer reviewed