Pasar al contenido principal

Electrolitos y electrodos innovadores para una nueva generación de baterías de sodio para aplicaciones estacionarias (NABASTAT)

PLEC2021-007779

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i en Líneas Estratégicas
Año convocatoria 2021
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CORDOBA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From Nanoscale to Macroscale Characterization of Sulfur-Modified Oxidized Carbon Nanotubes in Styrene Butadiene Rubber Compounds

  • Posadas Bernal, P.
  • Bernal-Ortega, Pilar
  • Bernal, M. Mar
  • Nogales, Aurora
  • Navarro Crespo, Rodrigo
  • Valentín, Juan L.
The homogeneous dispersion of carbon nanotubes (CNTs) in a rubber matrix is a key factor limiting their amazing potential. CNTs tend to agglomerate into bundles due to van der Waals interactions. To overcome this limitation, CNTs have been surface-modified with oxygen-bearing groups and sulfur. Using atomic force microscopy (AFM) techniques, a deep nanoscale characterization of the morphology, the degree of dispersion of the CNTs in the styrene butadiene rubber (SBR) matrix, and the thickness of the interfacial layer was carried out in this study. In this context, the results from nanoscale characterization showed that the thermal oxidation-sulfur treatment leads to a composite with better dispersion in the matrix, as well as a thicker interfacial layer, indicating a stronger filler¿rubber interaction. The second part of this work focused on the macroscale results, such as the Payne effect, vulcanization curves, and mechanical properties. The Payne effect, vulcanization curves, and mechanical properties confirmed the lower reinforcing effect observed in the case of the chemical oxidation treatment because, on the one hand, this composite showed the highest agglomeration of CNTs after the acid treatment. On the other hand, the presence of acid residues provoked the absorption of basic accelerators on the surface of the CNTs., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) under grants PID2020- 119047RB-I00 and PLEC2021-00779. Authors PP., R.N., and J.L.V. are members of the SusPlast platform from the Spanish National Research Council (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of macrodiols and non-segmented poly(ester-urethanes) (PEUs) derived from a,u-hydroxy telechelic poly(e-caprolactone) (HOPCLOH): effect of initiator, degree of polymerization, and diisocyanate

  • Barrera-Nava, Miriam P.
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • Báez, José E.
Nine different macrodiols derived from a,u-hydroxy telechelic poly(3-caprolactone) (HOPCLOH) were prepared by ring-opening polymerization of 3-caprolactone (CL) using three linear aliphatic diols (HO¿(CH2)n¿OH, where n = 4, 8, and 12) as initiators and catalyzed by ammonium decamolybdate (NH4)8[Mo10O34]. The crystallization temperature (Tc) and crystallinity (xi ) were relatively high for HOPCLOH species with a long aliphatic chain [¿(CH2)12¿] in the oligoester. Also, HOPCLOH was the precursor of twenty-seven different poly(ester-urethanes) (PEUs) with various degrees of polymerization (DP) of HOPCLOH and three types of diisocyanates such as 1,6-hexamethylene diisocyanate (HDI), methylene diphenyl diisocyanate (MDI), and 4,40 -methylenebis (cyclohexyl isocyanate) (HMDI). HOPCLOH exhibited the melting temperature (Tm) and crystallinity (xi ) with a proportional dependency to the degree of polymerization (DP). PEUs showed significant thermal and mechanical properties, which had a direct correlation in terms of the type of DP and diisocyanate. PEUs derived from HDI versus MDI or HMDI exhibited an apparent effect where aliphatic diisocyanate (HDI) induced a significant xi with respect to aromatic and cyclic diisocyanate (MDI or HMDI). The profile of PEUs films according to mechanical properties is mainly a plastic behavior. The chemical nature and properties of HOPCLOH and PEUs were characterized by NMR, FT-IR, GPC, MALDI-TOF, DSC, and mechanical properties., José E. Báez would like to thank the Consejo Nacional de Ciencia y Tecnologia (CONACYT) Ciencia Básica for the grant “Proyecto SEP/284893”, “CF-2023-I-2233”, and “CONACYTSENER 177007”, the Sistema Nacional de Investigadores (SNI), the Dirección de Apoyo a la Investigación y al Posgrado (DAIP), and the University of Guanajuato (UG) Mexico, for fnancial support. Miriam Paola Barrera-Nava would thank the University of Guanajuato (UG) Mexico, for financial support. This research was also funded by the Spanish Ministry of Science and Innovation (MINECO) (Projects PID2020-119047RB-I00 and PLEC2021-00779). Authors Rodrigo Navarro and ´ Angel MarcosFern´andez are members of the SusPlast platform from the Spanish National Research Council (CSIC), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigating filler-rubber interactions and amplification effect in reinforced elastomers

  • Martín Salamanca, Fernando
  • Narvaez-Fagoaga, M.
  • Montero-Escrivá, M.
  • Zepeda-Rodríguez, Z.
  • Tunnicliffe, Lewis B.
  • Valentín, Juan L.
Rubber represents one of the most important classes of polymers in modern industry due to its unique elastic properties. To satisfy the demanding technical requirements of industrial applications, solid (nano-)particles are often incorporated into the rubber matrix, leading to a reinforcement effect that enhances the mechanical performance of these materials. Rubber reinforcement theories establish quantitative relationships between the macroscopic mechanical properties and the molecular parameters that define the structure of rubber compounds. Nevertheless, quantification of all the structural parameters that define the reinforcement mechanism in rubber materials is still a complex challenge due to the number of parameters and their interrelation in the measurable physical properties. In this work, a new methodology based on the combination of uniaxial mechanical testing under quasi-static conditions and solid-state proton multiple-quantum nuclear magnetic resonance (<sup>1</sup>H MQ-NMR) is proposed to quantify all molecular parameters involved in the rubber reinforcement phenomenon. The achievement of this goal requires an extension of the current theory, to establish a common physical framework between the experimental approaches and to develop a novel combined analysis protocol. Finally, independent experiments based on strain sweep test (Payne effect) and selective cleavage of sulfur cross-links using chemical probes, have been employed to validate the proposed methodology, demonstrating strong agreement and internal consistency among all results. This study highlights the critical importance of including the amplification effects (strain and stress) on the reinforcement theory, which has been shown to play a decisive role in determining key molecular parameters, including the number of crosslinks, entanglements and filler–rubber interactions., This research was funded by the Spanish Ministry of Science and Innovation (MINECO) under grants PID2020-119047RB-I00, PLEC2021- 00779, and PID2023-147542OB-I00 and the EU under the program ERASMUS-EDU-2022-PI-ALL-INNO-BLUEPRINT, project 101103234. MNF acknowledges the Spanish Ministry of Science and Innovation (MINECO) for her PhD grant PREP2023-001425. FMS thanks Dr. Michael Lang for fruitful discussions and IPF for his postdoctoral guest stay. All authors from ICTP-CSIC are also members of the SusPlast platform from the Spanish National Research Council (CSIC)., Peer reviewed