Pasar al contenido principal

Banda Transportadora Ahorradora de Energía y No Adherente (BAENA)

CPP2023-010769

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Transferencia de Conocimiento
Convocatoria Proyectos en Colaboración Público-Privada
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario KAUMAN SAU

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ester-urethanes) derived from poly(ε-caprolactone) macrodiols: Effect of the molar ratios using design of experiments, synthesis, and characterization

  • Maldonado-Estudillo, Jaime
  • Cruz-Jiménez, Gustavo
  • Estévez, Miriam
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
  • González, Gerardo
  • Ramírez-Hernández, Aurelio
  • Báez, José E.
In this study, a randomized complete block design was established to compare three different molar ratios and assess their influence on various properties of a series of poly(ester-urethane)s (PEUs). Different molar ratios of 1,6-hexamethylene diisocyanate (HDI) to α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) (also called macrodiol) were investigated: 1.14:1, 1.05:1 and 1:1. The results showed that the 1.14:1 molar ratio produced PEUs with a high number-average molar mass (M<inf>n</inf>), the lowest residual hydroxyl content, and the highest urethane formation. Additionally, a significant decrease was observed in the enthalpy of fusion (ΔH<inf>m</inf>) of the soft segment for the 1.14:1 and 1.05:1 molar ratios, suggesting the presence of physical crosslinking between ester and urethane groups. Several significant correlations between the mechanical properties and M<inf>n</inf> were identified. The chemical nature of the PEUs was confirmed by different analytical techniques., Jose E. Baez acknowledges the funding provided by the Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) Ciencia Basica and Ciencia de Frontera for the grant “Proyecto SEP/ 284893”, “CF-2023-I-2233” and “CONAHCYT-SENER 177007”. Additionally, Rodrigo Navarro and Angel Marcos-Fernández also thank to Ministry of Science, Innovation and Universities for the funding received through the PID2023-147542OB-I00, and CPP2023-010769 grants. Jaime Maldonado-Estudillo thanks to CONAHCYT for a gradu- ate scholarship (No. 782319), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable Polyurethanes for Tissue Engineering: Influence of L-Lactide Content on Degradation and Mechanical Properties

  • Rubio Hernández-Sampelayo, Alejandra
  • Diñeiro García, Laura
  • González-García, Dulce M.
  • Martínez Campos, Enrique
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
The influence of L-lactide content (between 15% and 43%) on the degradation of biodegradable polyurethanes (PUs) for tissue engineering was systematically addressed in this study. An ideal tissue scaffold should exhibit a mechanical response and degradability appropriate for the host tissue. To achieve it, polyols containing ε-caprolactone and L-lactide moieties were used, with the random distribution of lactide units disrupting the regularity, and hence the crystallinity, of poly(caprolactone) segments, facilitating their degradation. The biodegradable PUs were synthesised using these copolymers as soft segments and were characterised through various physicochemical techniques, including bioassays and water absorption measurements. It was determined that mechanical behaviour and water absorption depended significantly on molecular weight, L-lactide content in the soft segment, and the crystallinity of the hard segment. Additionally, two types of chain extenders were also evaluated: hydrolysable and non-hydrolysable. PUs based on hydrolysable chain extenders achieved higher molecular weights and exhibited better mechanical performance than their non-hydrolysable counterparts. To assess the cytocompatibility of these materials, an endothelial model was used, involving metabolic activity and DNA content analysis. The results demonstrated good cell adhesion and the absence of toxicity, confirming the viability of cell growth on the surfaces of these biodegradable PUs. The PUs developed in this study exhibited a low initial modulus and adjustable mechanical properties, highlighting their potential application in tissue engineering as biodegradable and biocompatible biomedical materials., This research was partially funded by the European Union (ChemSkills grant number ERASMUS-EDU-2022-PI-ALL-INNO) and the Spanish Ministry of Science and Innovation (MINECO) grant number PID2023-147542OB-I00 and CPP2023-010769 and Consejo Superior de Investigaciones Científicas (CSIC) grant number IMOVE24205., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical upcycling of complex PET waste: Upcycling of milder reaction conditions and use for polyurethane as added-value product

  • Nava, Miriam Paola Barrera
  • de Dios Caputto, María Dolores
  • Navarro Crespo, Rodrigo
  • Torres, Alberto Fernández
  • Martínez-Richa, Antonio
  • Marcos-Fernández, Ángel
This study presents an efficient chemical upcycling route for complex poly(ethylene terephthalate) (PET) waste, including post-consumer bottles, thermoform PET, and the glycolysed monomer bis(2-hydroxyethyl) terephthalate (BHET), transforming them into liquid polyols for the synthesis of polyurethanes. The strategy is based on a catalysed solvolysis using ethylene carbonate (EC) as both a reagent and solvent, operating under mild conditions and at atmospheric pressure. A systematic screening demonstrated that caesium carbonate (Cs<inf>2</inf>CO<inf>3</inf>) is more efficient catalyst than KOH, as it minimises the hydrolysis of carbonate groups, thereby yielding polyols with a higher content of these valuable units. Kinetic studies revealed the critical importance of reaction time and the transition from a heterogeneous to a solvated and highly swollen polymer state. The resulting polyols, with controlled molecular weights in the range of 1000–2500 g/mol —appropriate for use as soft segments— were successfully employed in the synthesis of polyurethanes. The final materials exhibited high molecular weights and thermal properties that correlate with the chemical composition of the precursor polyol, validating this methodology as a versatile and sustainable alternative to advance towards a circular economy., The authors gratefully acknowledge the financial support from the European Union (ChemSkills grant number ERAMUS-EDU-2022-PI-ALL INNO) and Spanish Ministry of Science and Innovation (MINECO) (grant numbers PID2023-147542OB-I00 and CPP2023-010769). MDdC also acknowledges the Comunidad de Madrid for the predoctoral grant PIPF 2022/ECO-24517 and Consejo Superior de Investigaciones Científicas (CSIC) for additional funding under project IMOVE23133. MPBN ac knowledges the financial support provided by the Consejo Nacional de Humanidades, Ciencia y Tecnología (CONACYT, Mexico) for the grant (No. 926303), the Dirección de Apoyo a la Investigación y al Posgrado (DAIP), and the Universidad de Guanajuato., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradación de poliuretanos: enzimas y microorganismos para un reciclado sostenible

  • Marcos-Ríos, Daniel
  • Navarro Crespo, Rodrigo
  • Marcos-Fernández, Ángel
Actualmente, la degradación de poliuretanos se basa en métodos fisicoquímicos que son poco sostenibles con el medioambiente. La biodegradación es un proceso de reciclado terciario que hace uso de microorganismos o sus componentes para romper las cadenas poliméricas de los poliuretanos. Durante las últimas cuatro décadas, se han realizado varios estudios con cepas microbianas bacterianas y fúngicas, así como varios experimentos con enzimas que han demostrado potencial para poder ser utilizadas en procesos industriales. Si bien actualmente ninguno de los organismos o componentes mencionados se utiliza industrialmente, es de suma importancia desarrollar estas metodologías para poder ofrecer una alternativa sostenible a las actuales. En este artículo, se hace un repaso de la situación pasada y presente de estas investigaciones y se proponen algunas directrices sobre las que poder avanzar en el futuro, para así ofrecer la biodegradación de poliuretanos como una alternativa industrialmente viable y sostenible., Currently, the degradation of polyurethanes is based on physicochemical methods that are environmentally unsustainable. Biodegradation is a tertiary recycling process that makes use of microorganisms or their components to break down the polymeric chains of polyurethanes. Over the last four decades, several studies have been conducted with bacterial and fungal microbial strains, as well as several experiments with enzymes that have shown potential for use in industrial processes. Although none of the mentioned organisms or components are currently used industrially, it is of utmost importance to develop these methodologies in order to offer a sustainable alternative to the current ones. In this article, we review the past and present status of this research and propose some guidelines on which to advance in the future in order to offer biodegradation of polyurethanes as an industrially viable and sustainable alternative., Los autores agradecen al Ministerio de Ciencia, Innovación y Universidades de España el apoyo financiero (PID2023-147542OBI00, CPP2023-010769) y al Consejo Superior de Investigaciones Científicas el proyecto (202460E171).