Pasar al contenido principal

"ECOBLENDS" DE ALTO VALOR AÑADIDO PARA TECNICAS DE FABRICACION AVANZADAS

PID2019-106518RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE CATALA DEL PLASTIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

BioMOF@cellulose Glycerogel Scaffold with Multifold Bioactivity, Perspective in Bone Tissue Repair

  • Rosado, Albert|||0000-0003-3222-9566
  • Borrás Caballero, Alejandro|||0000-0002-0725-421X
  • Sánchez-Soto, Miguel|||0000-0002-0023-5059
  • Labíková, Magdaléna
  • Hettegger, Hubert|||0000-0002-9343-5673
  • Ramírez-Jiménez, Rosa Ana|||0000-0001-7563-2553
  • Rojo, Luís|||0000-0001-6334-6736
  • García-Fernández, Luis|||0000-0002-4179-2556
  • Aguilar, María Rosa|||0000-0001-7395-5754
  • Liebner, Falk|||0000-0002-8244-8153
  • López-Periago, Ana M.|||0000-0002-3777-3205
  • Ayllón, José A.|||0000-0001-7965-7424
  • Domingo, Concepción|||0000-0001-7857-2760
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization and properties of bio-aerogels composed of gelatin., Caracterización y propiedades de bio-aerogeles compuestos de gelatina.

  • Cruz Jesús, Lucía Guadalupe de la|||0000-0001-9009-4503
  • Abt, Tobias Martin|||0000-0002-4351-8155
  • Candau, Nicolas|||0000-0002-1559-8696
  • León Albiter, Noel|||0000-0003-1061-8552
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
Aerogels are low density foam-like materials that are obtained from a sol-gel process in which the solvent used is replaced by air without collapsing the previously formed threedimensional structure. In this work, we have studied the properties of aerogels composites that have been generated only from natural substances, using gelatin as matrix, clay and tannic acid as modifiers and water as unique solvent. The aerogels were obtained through lyophilization. While pure gelatin aerogel behaves like an elastic and low-stiffness foam, the addition of tannic acid and clay allow obtaining high resistant foams, reaching of up to a 9- fold increase in the elastic modulus, maintaining very low densities ( 0.14 g/cm3). These increases were obtained, on the one hand, due to a change in the aerogel micro-structure that evolved from a layered towards a honeycomb one. On the other hand, the alkaline conditions employed lead to the oxidation of tannic acid that was then able to establish covalent bonding with the amino groups of gelatin. The presence of well-dispersed clay in the matrix significantly reduced the rate of thermal degradation of the compounds due to its rearrangement into a stable protective layer on the surface of the material. Under conditions similar to those developed in a fire, the compound exhibited low flammability and high resistance to the spread of fire thanks to the synergistic action between clay and tannic acid. The achievement of multifunctional properties in these natural aerogels, allows broadening its applications, making that eventually, can replace traditional petroleumderived foams, such as polyurethane, polystyrene or phenol-formaldehyde that have a notable environmental impact., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Ice-templated gelatin aerogel composites

  • Sánchez Soto, Miguel|||0000-0002-0023-5059
  • Cruz Jesús, Lucía Guadalupe de la|||0000-0001-9009-4503
  • Abt, Tobias Martin|||0000-0002-4351-8155
  • León Albiter, Noel|||0000-0003-1061-8552
The authors acknowledge the financial support of this work given by the Ministerio de Ciencia e Innovación (Spain) through the project “UpECOBLENDS” with reference PID2019-106518RB-I00. The authors also thank the Generalitat de Catalunya for the Grant 2021SGR01042. Lucia G. De la Cruz acknowledges the Grant (No. 729201) received from the Consejo Nacional de Ciencia y Tecnología CONACYT (México). The Aerogels Cost Action CA18125 is also acknowledged
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hydrostatic pressure dependence in tensile and compressive behavior of an acrylonitrile–butadiene–styrene copolymer

  • Verbeeten, Wilco M. H.
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
  • Maspoch Rulduà, M. Lluïsa|||0000-0002-4813-6412
The strain-rate dependence of a commercial grade ABS copolymer has been analyzed in both compression and tension. By measuring in two loading geometries, the hydrostatic pressure-dependence on the material's deformation behavior can be established. An alternative method to determine pressure-dependence, based on the difference in strain-rate dependence for various loading geometries, has been presented. It was shown to be an effective technique, both for thermorheologically simple materials such as ABS, as well as thermorheologically complex materials, for example, PMMA. A yield criterion, based on an Eyring-type pressure-modified rate equation, has been compared to finite element simulations using the Eindhoven Glassy Polymer (EGP) constitutive model. Although both methods give quantitatively similar results for the yield stress prediction, only the fully 3D EGP model is able to represent the large-strain deformation behavior, Financial support from the Spanish Government (Ministry of Science and Innovation, Ministry of Economy and Competitiveness) through grant numbers RYC-2010-07171, DPI2011-25470, and PID2019-106518RB-I00 is gratefully acknowledged
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

BioMOF@cellulose glycerogel scaffold with multifold bioactivity: perspective in bone tissue repair

  • Rosado Morente, Albert
  • Borras Caballero, Alejandro
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation, This work was funded by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) with the Spanish National Plan of Research projects PID2020-115631GB-I00, PID2020-114086RB-I00 and PID2019-106518RB-I00, and also CIBER (Spain)—Consorcio Centro de Investigación Biomédica en Red (CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (202180E048). Furthermore, financial support through the Austrian-Czech Project CZ 17/2023 (M.L., H.H.), funded by the Austrian Agency for Education and Internationalisation (OeAD), is thankfully acknowledged. M.S.-S. thanks the Generalitat de Catalunya for the grant 2021SGR01042. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant and AERoGELS Cost Action (CA18125) with regards to a Short-Term Scientific Mission (STSM)
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Hydrostatic pressure dependence in tensile and compressive behavior of an acrylonitrile–butadiene–styrene copolymer

  • Verbeeten, Wilco M.H.
  • Sánchez‐Soto, Miguel
  • Maspoch, Maria Lluisa
The strain-rate dependence of a commercial grade ABS copolymer has been analyzed in both compression and tension. By measuring in two loading geometries, the hydrostatic pressure-dependence on the material's deformation behavior can be established. An alternative method to determine pressure-dependence, based on the difference in strain-rate dependence for various loading geometries, has been presented. It was shown to be an effective technique, both for thermorheologically simple materials such as ABS, as well as thermorheologically complex materials, for example, PMMA. A yield criterion, based on an Eyring-type pressure-modified rate equation, has been compared to finite element simulations using the Eindhoven Glassy Polymer (EGP) constitutive model. Although both methods give quantitatively similar results for the yield stress prediction, only the fully 3D EGP model is able to represent the large-strain deformation behavior., Spanish Government (Ministry of Science and Innovation, Ministry of Economy and Competitiveness) through grant numbers RYC- 2010-07171, DPI2011-25470, and PID2019-106518RB-I00 is gratefully acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

BioMOF@cellulose glycerogel scaffold with multifold bioactivity: perspective in bone tissue repair

  • Rosado Morente, Albert
  • Borras Caballero, Alejandro
  • Sánchez Soto, Miguel
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid. The bioMOF framework is further impregnated with a third bioactive component, i.e., ibuprofen (ibu), to generate a multifold bioactive system. The integrated CaSyr-1(ibu) serves as a reservoir for bioactive compounds delivery, while the NCC scaffold is the proposed matrix for cell ingrowth, proliferation and differentiation. The measured drug delivery profiles, studied in a phosphate-buffered saline solution at 310 K, indicate that the bioactive components are released concurrently with bioMOF dissolution after ca. 30 min following a pseudo-first-order kinetic model. Furthermore, according to the semi-empirical Korsmeyer-Peppas kinetic model, this release is governed by a case-II mechanism, suggesting that the molecular transport is influenced by the relaxation of the NCC matrix. Preliminary in vitro results denote that the initial high concentration of glycerol in the NCC scaffold can be toxic in direct contact with human osteoblasts (HObs). However, when the excess of glycerol is diluted in the system (after the second day of the experiment), the direct and indirect assays confirm full biocompatibility and suitability for HOb proliferation, This work was funded by the Spanish Ministry of Science and Innovation (MICINN) through the Severo Ochoa Program for Centers of Excellence (CEX2019-000917-S) with the Spanish National Plan of Research projects PID2020-115631GB-I00, PID2020-114086RB-I00 and PID2019-106518RB-I00, and also CIBER (Spain)—Consorcio Centro de Investigación Biomédica en Red (CB06/01/0013), Instituto de Salud Carlos III. This research work was performed in the framework of the Nanomedicine CSIC HUB (202180E048). Furthermore, financial support through the Austrian-Czech Project CZ 17/2023 (M.L., H.H.), funded by the Austrian Agency for Education and Internationalisation (OeAD), is thankfully acknowledged. M.S.-S. thanks the Generalitat de Catalunya for the grant 2021SGR01042. This work has been performed in the framework of the doctoral program “Chemistry” of the UAB by A.R. that acknowledges the financial support of a FPI 2019 grant and AERoGELS Cost Action (CA18125) with regards to a Short-Term Scientific Mission (STSM), Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydrostatic pressure dependence in tensile and compressive behavior of an acrylonitrile–butadiene–styrene copolymer

  • Verbeeten, Wilco M. H.
  • Sánchez Soto, Miguel
  • Maspoch Rulduà, M. Lluïsa
The strain-rate dependence of a commercial grade ABS copolymer has been analyzed in both compression and tension. By measuring in two loading geometries, the hydrostatic pressure-dependence on the material's deformation behavior can be established. An alternative method to determine pressure-dependence, based on the difference in strain-rate dependence for various loading geometries, has been presented. It was shown to be an effective technique, both for thermorheologically simple materials such as ABS, as well as thermorheologically complex materials, for example, PMMA. A yield criterion, based on an Eyring-type pressure-modified rate equation, has been compared to finite element simulations using the Eindhoven Glassy Polymer (EGP) constitutive model. Although both methods give quantitatively similar results for the yield stress prediction, only the fully 3D EGP model is able to represent the large-strain deformation behavior, Financial support from the Spanish Government (Ministry of Science and Innovation, Ministry of Economy and Competitiveness) through grant numbers RYC-2010-07171, DPI2011-25470, and PID2019-106518RB-I00 is gratefully acknowledged, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ice-templated gelatin aerogel composites

  • Sánchez Soto, Miguel
  • Cruz Jesús, Lucía Guadalupe de la
  • Abt, Tobias Martin
  • León Albiter, Noel
The authors acknowledge the financial support of this work given by the Ministerio de Ciencia e Innovación (Spain) through the project “UpECOBLENDS” with reference PID2019-106518RB-I00. The authors also thank the Generalitat de Catalunya for the Grant 2021SGR01042. Lucia G. De la Cruz acknowledges the Grant (No. 729201) received from the Consejo Nacional de Ciencia y Tecnología CONACYT (México). The Aerogels Cost Action CA18125 is also acknowledged, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization and properties of bio-aerogels composed of gelatin., Caracterización y propiedades de bio-aerogeles compuestos de gelatina.

  • Cruz Jesús, Lucía Guadalupe de la
  • Abt, Tobias Martin
  • Candau, Nicolas
  • León Albiter, Noel
  • Sánchez Soto, Miguel
Aerogels are low density foam-like materials that are obtained from a sol-gel process in which the solvent used is replaced by air without collapsing the previously formed threedimensional structure. In this work, we have studied the properties of aerogels composites that have been generated only from natural substances, using gelatin as matrix, clay and tannic acid as modifiers and water as unique solvent. The aerogels were obtained through lyophilization. While pure gelatin aerogel behaves like an elastic and low-stiffness foam, the addition of tannic acid and clay allow obtaining high resistant foams, reaching of up to a 9- fold increase in the elastic modulus, maintaining very low densities ( 0.14 g/cm3). These increases were obtained, on the one hand, due to a change in the aerogel micro-structure that evolved from a layered towards a honeycomb one. On the other hand, the alkaline conditions employed lead to the oxidation of tannic acid that was then able to establish covalent bonding with the amino groups of gelatin. The presence of well-dispersed clay in the matrix significantly reduced the rate of thermal degradation of the compounds due to its rearrangement into a stable protective layer on the surface of the material. Under conditions similar to those developed in a fire, the compound exhibited low flammability and high resistance to the spread of fire thanks to the synergistic action between clay and tannic acid. The achievement of multifunctional properties in these natural aerogels, allows broadening its applications, making that eventually, can replace traditional petroleumderived foams, such as polyurethane, polystyrene or phenol-formaldehyde that have a notable environmental impact., Peer Reviewed, Postprint (published version)