Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

3D-printed aerogels as theranostic implants monitored by fluorescence bioimaging

  • Iglesias-Mejuto, Ana
  • Pinto, Rui
  • Faísca, Pedro
  • Catarino, Jose
  • Rocha, João
  • Durães, Luisa
  • Gaspar, Maria Manuela
  • Pinto Reis, Catarina
  • García González, Carlos A.
Aerogel scaffolds are nanostructured materials with beneficial properties for tissue engineering applications. The tracing of the state of the aerogels after their implantation is challenging due to their variable biodegradation rate and the lack of suitable strategies capable of in vivo monitoring the scaffolds. Upconversion nanoparticles (UCNPs) have emerged as advanced tools for in vitro bioimaging because of their fluorescence properties. In this work, highly fluorescent UCNPs were loaded into aerogels to obtain theranostic implants for tissue engineering and bioimaging applications. 3D-printed alginate-hydroxyapatite aerogels labeled with UCNPs were manufactured by 3D printing and supercritical CO2 drying to generate personalize-to-patient aerogels. The physicochemical performance of the resulting structures was evaluated by printing fidelity measurements, nitrogen adsorption-desorption analysis, and different microscopies (confocal, transmission and scanning electron microscopies). Stability of the aerogels in terms of physicochemical properties was also tested after 3 years of storage. Biocompatibility was evaluated in vitro by different cell and hemocompatibility assays, in ovo and in vivo by safety and bioimaging studies using different murine models. Cytokines profile, tissue index and histological evaluations of the main organs unveiled an in vivo downregulation of the inflammation after implantation of the scaffolds. UCNPs-decorated aerogels were first-time manufactured and long-term traceable by fluorescencebased bioimaging until 3 weeks post-implantation, thereby endorsing their suitability as tissue engineering and theranostic nanodevices (i.e. bifunctional implants).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Direct and green production of sterile aerogels using supercritical fluid technology for biomedical applications

  • Carracedo Pérez, María
  • Ardao Palacios, Inés
  • López Iglesias, Clara
  • Magariños Ferro, Beatriz
  • García González, Carlos A.
Aerogels based on natural polymers are of increasing interest in the biomedical field due to their biocompatibility, bioactivity, biodegradability and, in certain cases, extracellular matrix biomimicry. However, sterility has been a critical quality attribute limiting the use of aerogels in biomedicine. This work introduces a new and environmental-friendly technique based on the use of CO2 called in situ sterilization that enables the manufacturing of sterile aerogel in a one-pot process. Starch aerogel cylinders and alginate aerogel beads enclosed within sterilization pouches were produced using this approach. The study involved the redesign of the flow diagram for aerogel production and the study of the effect of key parameters in the process (additive type and content, agitation, CO2 flow regime type and duration) on the resulting material. The obtained materials were evaluated regarding their texture (helium pycnometry, N2 adsorption-desorption analysis, SEM) and their sterility against three standardized bioindicators. Finally, the sterile aerogel materials were put in contact with NIH-3T3 cells assessing their cytocompatibility. Under the optimal operating conditions with 4.5 h of processing time, the aerogels were sterile, cytocompatible and had a porosity of ca. 80 % and a specific surface area of ca. 80 m2/g and 200 m2/g, for starch and alginate aerogels, respectively. Results allowed to identify the feasible operating region as well as the optimum processing values to obtain the typical nanostructure of aerogels, whilst ensuring suitable regulatory sterilization levels for aerogel implantation and cytocompatibility of the sterile material with fibroblastic cells.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Breathing green: Sustainable approaches for the reuse of FFP2 facemasks

  • Carracedo Pérez, María
  • Prieto López, Cristina
  • Blanco Vales, María
  • Magariños Ferro, Beatriz
  • López Iglesias, Clara
  • García González, Carlos A.
Facemasks are essential components in healthcare environments, but their disposal represents a significant environmental concern. This study proposes an optimized sterilization treatment for the reprocessing of electrostatic filter (EF) and mechanical filter (MF) facemasks using supercritical carbon dioxide (scCO2) and hydrogen peroxide, achieving a Sterility Assurance Level (SAL) of 10−6 in microbial load. The performance of the facemasks was evaluated after 1, 5, and 10 cycles and compared with those subjected to ethylene oxide and to γ-rays sterilization procedures, in terms of filtration efficiency, breathability, electrostatic charges of the filters, and of mechanical properties of the elastic bands. Structural and chemical changes were characterized using SEM and FTIR. The findings demonstrated that scCO2 treatment induced electrostatic charges in the MF, improving their filtration efficiency. The supercritical treatment also preserved the chemical and structural integrity of both types of filters. Results underscore the effectiveness of the scCO2 method as a viable and sustainable alternative to conventional sterilization methods.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Supercritical CO2 sterilization for surgical gowns: From disposal towards reuse

  • Blanco Vales, María
  • Carracedo Pérez, María
  • Sánchez Ramírez, Diego Omar
  • Varesano, Alessio
  • Magariños Ferro, Beatriz
  • García González, Carlos A.
  • López Iglesias, Clara
Surgical gowns (SG) are one of the most used personal protective equipment. As they are mainly intended for single use, they give rise to an enormous amount of waste, posing a major environmental challenge. Sterilization plays an essential role to allow the reuse of such textiles, therefore reducing their massive disposal. Commonly used techniques, such as gas plasma, gamma rays and ethylene oxide, can present important drawbacks regarding biological safety, ecotoxicity, and potential damage to materials. Supercritical CO2 (scCO2) sterilization emerges as a promising eco-friendly alternative due to the bactericidal properties of CO2. This work investigates the effectiveness of scCO2 sterilization with disposable surgical gowns (DSG), with hydrogen peroxide as an additive, achieving the required Sterility Assurance Level of ≤ 10−6. Physical properties and performance of DSG were evaluated after 1, 5, and 10 cycles of scCO2 sterilization and compared to those treated under ethylene oxide and gamma irradiation treatments. Results suggest that scCO2 is a viable, green and reliable option for sterilizing DSG, offering environmental advantages and preserving the functional performance of the material.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Oxygen-generating and antibacterial xanthan gum/PLA aerogels loaded with dexamethasone for potential wound healing

  • Hozjan, Nika Atelšek
  • Horvat, Gabrijela
  • Finšgar, MMatjaž
  • Iglesias-Mejuto, Ana
  • Ardao Palacios, Inés
  • García González, Carlos A.
  • Knez, Zeljko A.
  • Novak, Zoran
Chronic wounds do not heal within a reasonable time frame due to hypoxia and bacterial inflammation, creating an urgent need for advanced biomaterials to address these challenges. In this study, oxygen-generating, antibacterial xanthan gum-polylactic acid (XA/PLA) aerogels loaded with dexamethasone were developed for the first time for potential wound healing applications. The aerogels contained sodium percarbonate and calcium peroxide as oxygen-releasing agents, providing sustained oxygen release for up to 48 h. The aerogels had a highly porous structure with a high specific surface area (up to 396 ± 8 m2/g) and revealed high liquid absorption capacity in simulated body fluid, absorbing up to 67 times their original weight and remaining stable for 72 h. The in vitro release tests showed controlled profiles of dexamethasone over 24 h. The antibacterial tests demonstrated strong antibacterial activity against Escherichia coli (an up to 15.92 mm inhibition zone diameter) and Staphylococcus aureus (up to a 31.07 mm inhibition zone diameter). The in vitro biocompatibility assays revealed good cytocompatibility with mouse fibroblast cells (NIH/3T3), with a cell viability of >90%. Hemocompatibility tests showed no hemolytic activity with human blood (lysis rate <2%). Overall, these results emphasise the versatility of the XA/PLA aerogels and their potential for the treatment of chronic wounds.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Innovative Processing and Sterilization Techniques to Unlock the Potential of Silk Sericin for Biomedical Applications

  • Veiga, Anabela
  • Ramírez-Jiménez, Rosa Ana
  • Santos Rosales, Víctor
  • García González, Carlos A.
  • Aguilar, Maria Rosa
  • Rojo, Luis
  • Oliveira, Ana L.
Silk sericin (SS), a by-product of the textile industry, has gained significant attention for its biomedical potential due to its biocompatibility and regenerative potential. However, the literature lacks information on SS processing methods and the resulting physicochemical properties. This study represents the first step in protocol optimization and standardization. In the present work, different processing techniques were studied and compared on SS extracted from boiling water: evaporation, rotary evaporation, lyophilization, and dialysis, which presented a recovery yield of approximately 27–32%. The goal was to find the most promising process to concentrate extracted SS solutions, and to ensure that the SS structure was highly preserved. As a result, a new cryo-lyophilization methodology was proposed. The proposed method allows for the preservation of the amorphous structure, which offers significant advantages including complete dissolution in water and PBS, an increase in storage stability, and the possibility of scaling-up, making it highly suitable for industrial and biomedical applications. The second part of the work focused on addressing another challenge in SS processing: efficient and non-destructive sterilization. Supercritical CO2 (scCO2) has been gaining momentum in the last years for sterilizing sensitive biopolymers and biological materials due to its non-toxicity and mild processing conditions. Thus, scCO2 technology was validated as a mild technique for the terminal sterilization of SS. In this way, it was possible to engineer a sequential cryo-lyophilization/scCO2 sterilization process which was able to preserve the original properties of this natural silk protein. Overall, we have valorized SS into a sterile, off-the-shelf, bioactive, and water-soluble material, with the potential to be used in the biomedical, pharmaceutical, or cosmetic industries.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Cellulose‑in‑cellulose 3D‑printed bioaerogels for bone tissue engineering

  • Iglesias-Mejuto, Ana
  • Malandain, Nanthilde
  • Ferreira-Gonçalves, Tânia
  • Ardao Palacios, Inés
  • Pinto Reis, Catarina
  • Laromaine, Anna
  • Roig, Anna
  • García González, Carlos A.
Nanostructured scaffolds based on cellulose with advanced performances and personalized morphologies for bone tissue engineering are under technological development. 3D-printing and supercritical carbon dioxide (scCO2) technologies are innovative processing strategies that, when combined, allow the precise fabrication of highly porous aerogel scaffolds. Novel sterile cellulose-in-cellulose aerogels decorated with superparamagnetic iron oxide nanoparticles (SPIONs) are synthesized in this work by an integrated technological platform based on 3D-printing and scCO2. Methylcellulose (MC) and bacterial nanocellulose (BC) are two versatile cellulosic polysaccharides with remarkable physicochemical and biological performances, whereas SPIONs are commonly used to functionalize biomaterials aimed at tissue engineering. Aerogels with hierarchical porosity and high structural resolution were obtained according to nitrogen adsorption–desorption analysis, confocal, scanning and transmission microscopies (SEM and TEM). The magnetic properties of SPIONsdoped aerogels confirmed the correct functionalization of the nanostructures. Finally, NIH/3T3 fibroblast cell viability, hemocompatibility with human blood and safety tests (in ovo with HET-CAM and in vivo with Artemia salina) indicate the biocompatibility of the cellulose-in-cellulose aerogels.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose-in-cellulose 3D-printed bioaerogels for bone tissue engineering

  • Iglesias Mejuto, Ana
  • Malandain, Nanthilde
  • Ferreira-Gonçalves, Tânia
  • Ardao, Inés
  • Reis, Catarina Pinto
  • Laromaine, Anna
  • Roig Serra, Anna
  • García González, Carlos A.
Nanostructured scaffolds based on cellulose with advanced performances and personalized morphologies for bone tissue engineering are under technological development. 3D-printing and supercritical carbon dioxide (scCO2) technologies are innovative processing strategies that, when combined, allow the precise fabrication of highly porous aerogel scaffolds. Novel sterile cellulose-in-cellulose aerogels decorated with superparamagnetic iron oxide nanoparticles (SPIONs) are synthesized in this work by an integrated technological platform based on 3D-printing and scCO2. Methylcellulose (MC) and bacterial nanocellulose (BC) are two versatile cellulosic polysaccharides with remarkable physicochemical and biological performances, whereas SPIONs are commonly used to functionalize biomaterials aimed at tissue engineering. Aerogels with hierarchical porosity and high structural resolution were obtained according to nitrogen adsorption–desorption analysis, confocal, scanning and transmission microscopies (SEM and TEM). The magnetic properties of SPIONs-doped aerogels confirmed the correct functionalization of the nanostructures. Finally, NIH/3T3 fibroblast cell viability, hemocompatibility with human blood and safety tests (in ovo with HET-CAM and in vivo with Artemia salina) indicate the biocompatibility of the cellulose-in-cellulose aerogels. Graphical abstract: [Figure not available: see fulltext.]., This work was supported by Xunta de Galicia [ED431C 2020/17], MICINN [PID2020-120010RB-I00; PDC2022-133526-I00; PID2021-122645OB-I00], Agencia Estatal de Investigación [AEI], FEDER funds, 'Severo Ochoa' Programme for Center of Excellence in R&D (CEX2019-000917), and Generalitat de Catalunya (2021SGR00446 Grant). Work carried out in the framework of the COST Action IG18125 “Technical, commercial and societal innovations on aerogels towards circular economy” (ECO-AERoGELS) and funded by the European Commission. This work was also supported by Fundação para a Ciência e Tecnologia (FCT), Portugal, under the project references UIDB/00645/2020, UIDB/04138/2020 and UIDP/04138/2020. A.I.-M. acknowledges to Xunta de Galicia [ED481A-2020/104], N.M. to MICINN (PRE2019-089754, enrolled at the Biotechnology PhD program of the UABand), and T.F.-G. to Fundação para a Ciência e a Tecnologia, I.P. (FCT) [SFRH/BD/147306/2019] for their predoctoral research fellowships. N.M., A.L., and A.R. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), Nanomed Hub, Conexion Nanomedicina, Red Nanocare 2.0, and EPNOE network., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Printed Cellulose Aerogels Minimally Cross-Linked with Polyurea: A Robust Strategy for Tissue Engineering

  • Iglesias Mejuto, Ana
  • Raptopoulos, Grigorios
  • Malandain, Nanthilde
  • Neves Amaral, Mariana
  • Ardao, Inés
  • Finšgar, Matjaž
  • Laromaine, Anna
  • Roig Serra, Anna
  • Pinto Reis, Catarina
  • García González, Carlos A.
  • Paraskevopoulou, Patrina
Cellulose and its derivatives are increasingly explored in biomedical applications due to their biocompatibility, biodegradability, and mechanical performance. In regenerative medicine, aerogel scaffolds with tunable morphology and composition are highly valued for their ability to support tissue regeneration. Three-dimensional (3D) printing offers an effective method to fabricate aerogels with hierarchical pore structures, comprising interconnected macropores and mesopores, that are crucial for tissue engineering. For clinical use, 3D printing should ensure the structural integrity of printed structures and achieve a printing resolution that allows for customization. In this work, the X-aerogel technology, implemented via polyurea cross-linking, was applied to 3D-printed cellulose structures, thereby expanding the potential applications of both technologies. Specifically, 3D-printed methylcellulose (MC) and MC doped with bacterial cellulose nanofiber (MCBCf) gels were cross-linked with an aliphatic polyurea, yielding, after supercritical drying, the corresponding (X-MC and X-MCBCf) aerogels. Elaborate characterization with ATR-FTIR, XPS, ToF-SIMS, N2 porosimetry, He pycnometry, and SEM confirmed the formation of polyurea on the biopolymer framework, reinforcing the structure and improving the mechanical properties without altering the morphology or textural characteristics of the materials. A significant outcome of cross-linking with polyurea is the long-term stability of X-MC and X-MCBCf aerogels in water, in contrast to their native counterparts, and their capacity to absorb water up to 1800% w/w within only 2 h. Preliminary biological evaluation of the materials, including in vitro (cell compatibility, hemolytic activity), in ovo (HET-CAM), and in vivo (A. salina model) tests, showed good cell viability, blood compatibility, and safety for living organisms. From a fundamental materials perspective, the most important finding of this work is the disproportionally high stability of X-MC and X-MCBCf in physiological environments, achieved with only a minimal (almost undetectable) amount of cross-linking polyurea. From an application standpoint, the findings of this study, collectively, position these aerogels as sustainable and promising candidates for tissue engineering scaffolds., This work was funded by MICIU/AEI/10.13039/501100011033 (grants PID2023-151340OB-I00, PDC2022-133526-I00, PID2021-122645OB-I00), by MCIN/AEI/10.13039/501100011033 (project PDC2023-145826-I00), by European Union ″NextGeneration EU″/PRTR, Xunta de Galicia (grant ED431C 2024/009 and GAIN - Ignicia Programme 2021, ECOBONE), ERDF/EU, and Fundação para a Ciência e Tecnologia (FCT) through projects UIDB/00645/2020 (10.54499/UIDB/00645/2020), UIDP/00645/2020 (10.54499/UIDP/00645/2020), UIDB/04138/2020 and UIDP/04138/2020. Work carried out in the framework of the ECO-AERoGELS COST Innovators’ Grant (ref IG18125) funded by the European Commission. N.M. acknowledges MICINN (PRE2019-089754) and M.N.A. FCT (SFRH/BD/05377/2021) for their PhD fellowships. A.R. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), Nanomed Hub, Conexion Nanomedicina, Nanocare Network (Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033), and the EPNOE network. The financial support by the Slovenian Research Agency (Grant No. P2-0118 and J1-60015) is gratefully acknowledged. The project is cofinanced by the Republic of Slovenia, the Ministry of Education, Science and Sport, and the European Union under the European Regional Development Fund. Financial support from the General Secretariat for Research and Innovation, Greece, and the Special Account for Research Grants of the National and Kapodistrian University of Athens is acknowledged. Covestro AG is also gratefully acknowledged for the generous supply of Desmodur N3300 Ultra., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Breathing green: Sustainable approaches for the reuse of FFP2 facemasks

  • Carracedo Pérez, María
  • Prieto López, Cristina
  • Blanco Vales, María
  • Magariños, Beatriz
  • López Iglesias, Clara
  • García González, Carlos A.
Facemasks are essential components in healthcare environments, but their disposal represents a significant environmental concern. This study proposes an optimized sterilization treatment for the reprocessing of electrostatic filter (EF) and mechanical filter (MF) facemasks using supercritical carbon dioxide (scCO2) and hydrogen peroxide, achieving a Sterility Assurance Level (SAL) of 10−6 in microbial load. The performance of the facemasks was evaluated after 1, 5, and 10 cycles and compared with those subjected to ethylene oxide and to γ-rays sterilization procedures, in terms of filtration efficiency, breathability, electrostatic charges of the filters, and of mechanical properties of the elastic bands. Structural and chemical changes were characterized using SEM and FTIR. The findings demonstrated that scCO2 treatment induced electrostatic charges in the MF, improving their filtration efficiency. The supercritical treatment also preserved the chemical and structural integrity of both types of filters. Results underscore the effectiveness of the scCO2 method as a viable and sustainable alternative to conventional sterilization methods., This work was funded by MICIU/AEI/10.13039/501100011033 [grants PID2023–151340OB-I00 and PDC2022–133526-I00], Xunta de Galicia [ED431C2022/2023], ERDF/EU and European Union NextGenerationEU/PRTR. C.L.-I. acknowledges Xunta de Galicia for a postdoctoral fellowship [ED481B-2021–008]. Work carried out in the framework of the ECO-AERoGELS COST Innovators’ Grant (ref. IG18125) and funded by the European Commission. C.P. acknowledges the funding received from the European EU4Health program (2G-Proveil - 101203379) and from CSIC through the Grants to tenured scientists from OEP 2020–2021 (2024ICT225), and the accreditation as Center of Excellence Severo Ochoa CEX2021–001189-S funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed