Pasar al contenido principal

AVANCES EN AEROGELES PARA APLICACIONES BIOMEDICAS A TRAVES DE SOLUCIONES SOSTENIBLES Y HERRAMIENTAS DE INTELIGENCIA ARTIFICIAL

PID2023-151340OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Engineering aerogel particles as next-generation drug delivery systems: a comprehensive review of recent advances

  • Gomes, Susana M.
  • Illanes Bordomás, Carlos
  • García González, Carlos A.
  • Akgün, Işık Sen
Aerogels, defined as low-density solid materials with high porosities, open pore structures, and high specific surface areas, have shown increasing interest among the scientific and industrial communities. The engineering of aerogels in the form of spherical particles has been well documented for several applications and recent studies have highlighted the promising potential of use them as drug delivery systems. Therefore, this review article consolidates the recent progress on aerogel particle technology by providing a comprehensive and focused synthesis of the state-of-the-art of aerogel particle design specifically intended to enhance biocompatibility, stability, and targeted drug delivery. The engineering technologies herein presented, based on droplets production and on the milling technology, are critically discussed, highlighting critical aspects used to control their features. Moreover, surface modification and coating techniques are critically examined as tools to enhance biocompatibility, colloidal stability, and targeted delivery. Then, key results in the diverse biomedical applications, namely for oral, skin and pulmonary drug delivery, were discussed. In oral delivery, their capacity to improve drug loading and enable sustained release is emphasized. In skin delivery, aerogels show potential to enhance dermal permeation and provide a sustained release. For pulmonary administration, their low density and aerodynamic properties make them ideal for deep lung deposition. By bridging particle engineering with therapeutic functionality, this review highlights the unique features and advantages of aerogel particles to become the next-generation aerogel-based therapeutic systems. Finally, the current challenges to be addressed and future trends are identified.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Review and Perspectives on the Sustainability of Organic Aerogels

  • García González, Carlos A.
  • Blanco Vales, María
  • Iglesias-Mejuto, Ana
  • López Iglesias, Clara
Aerogels are exceptionally lightweight materials characterized by their high open porosity and remarkable specific surface area, currently used across a wide array of industrial sectors from construction to energy storage and have great potential for expanding their applicability and unlocking new market opportunities. Driven by global economic growth and an intensifying environmental crisis, there is a growing demand for engineering innovations that prioritize sustainability. Aerogels are well-positioned to support these sustainability efforts. Their unique properties make them ideal for energy-saving solutions, environmental remediation, and more efficient use of resources. As the demand for eco-conscious technologies rises, aerogels are poised to contribute significantly to the development of greener, more efficient products and processes across multiple industries. The sustainability of aerogel technology is crucial for the mid-to-long-term future, yet its current status has been scarcely reviewed in the literature. This Perspective explores and critically reviews significant advances on organic and hybrid aerogels in the current socioeconomic scenario, with selected case studies endorsing their contribution to the UN Sustainable Development Goals. It also identifies research gaps while proposing innovative strategies to enhance the sustainability of aerogel production through the application of circular economy principles. Key strategies discussed involve the fabrication of aerogels using eco-friendly sources, such as biopolymers derived from biorefinery processes or from waste materials. Additionally, this Perspective examines the development of methods for the reuse, recycling, and end-of-life management of aerogels, along with the implementation of more efficient processing routes. Ultimately, this work highlights the need for comprehensive assessments of aerogel sustainability through life cycle assessment (LCA) and evaluations of safety and toxicity. By addressing these critical aspects, the potential of aerogels to contribute to a more sustainable future appears highly favorable from both commercial and research perspectives, paving the way for a circular aerogel economy and providing a lasting impact to the society in which we live.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Breathing green: Sustainable approaches for the reuse of FFP2 facemasks

  • Carracedo Pérez, María
  • Prieto López, Cristina
  • Blanco Vales, María
  • Magariños Ferro, Beatriz
  • López Iglesias, Clara
  • García González, Carlos A.
Facemasks are essential components in healthcare environments, but their disposal represents a significant environmental concern. This study proposes an optimized sterilization treatment for the reprocessing of electrostatic filter (EF) and mechanical filter (MF) facemasks using supercritical carbon dioxide (scCO2) and hydrogen peroxide, achieving a Sterility Assurance Level (SAL) of 10−6 in microbial load. The performance of the facemasks was evaluated after 1, 5, and 10 cycles and compared with those subjected to ethylene oxide and to γ-rays sterilization procedures, in terms of filtration efficiency, breathability, electrostatic charges of the filters, and of mechanical properties of the elastic bands. Structural and chemical changes were characterized using SEM and FTIR. The findings demonstrated that scCO2 treatment induced electrostatic charges in the MF, improving their filtration efficiency. The supercritical treatment also preserved the chemical and structural integrity of both types of filters. Results underscore the effectiveness of the scCO2 method as a viable and sustainable alternative to conventional sterilization methods.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Supercritical CO2 sterilization for surgical gowns: From disposal towards reuse

  • Blanco Vales, María
  • Carracedo Pérez, María
  • Sánchez Ramírez, Diego Omar
  • Varesano, Alessio
  • Magariños Ferro, Beatriz
  • García González, Carlos A.
  • López Iglesias, Clara
Surgical gowns (SG) are one of the most used personal protective equipment. As they are mainly intended for single use, they give rise to an enormous amount of waste, posing a major environmental challenge. Sterilization plays an essential role to allow the reuse of such textiles, therefore reducing their massive disposal. Commonly used techniques, such as gas plasma, gamma rays and ethylene oxide, can present important drawbacks regarding biological safety, ecotoxicity, and potential damage to materials. Supercritical CO2 (scCO2) sterilization emerges as a promising eco-friendly alternative due to the bactericidal properties of CO2. This work investigates the effectiveness of scCO2 sterilization with disposable surgical gowns (DSG), with hydrogen peroxide as an additive, achieving the required Sterility Assurance Level of ≤ 10−6. Physical properties and performance of DSG were evaluated after 1, 5, and 10 cycles of scCO2 sterilization and compared to those treated under ethylene oxide and gamma irradiation treatments. Results suggest that scCO2 is a viable, green and reliable option for sterilizing DSG, offering environmental advantages and preserving the functional performance of the material.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Engineering of green sterilization technology to obtain biocompatible aerogels: Supercritical CO2 versus ethylene oxide and gamma radiation

  • Carracedo Pérez, María
  • Boccia, Antonella Caterina
  • Ardao Palacios, Inés
  • Passos, Cláudia Pereira
  • Santos Rosales, Víctor
  • Santos Torres, Beatriz
  • Bernardo, Fábio Gabriel Pereira
  • Blanco Vales, María
  • Magariños Ferro, Beatriz
  • García González, Carlos A.
The growing relevance of aerogels in biomedicine demands the choice of compatible sterilization techniques with these materials. Conventional methods, such as ethylene oxide (EO) and gamma radiation (γ-rays) sterilization, have significant drawbacks while facing important environmental restrictions. In this study, supercritical CO2 (scCO2) sterilization is tested for polysaccharide (starch and alginate) aerogels as an eco-friendly alternative to conventional procedures. Three post-processing treatments under different CO2 exposure regimes (static, dynamic and combined) and in the presence of H2O2 as additive were developed and assessed to reach sterility assurance levels (SAL) below 10−6. After sterilization, a vacuum treatment was implemented to ensure a low residual presence of H2O2 in the aerogels so that the material biocompatibility was not compromised according to in vitro cell tests with fibroblasts. The residual adsorbed H2O2 was quantified for the first time in aerogels by nuclear magnetic resonance spectroscopy. The effects of the supercritical sterilization treatments on the textural and chemical properties of the aerogels were evaluated and compared to those treated with EO and γ-rays. Results highlight the unique efficiency of scCO2 sterilization as a post-processing method that preserves the aerogel structure while offering an eco-sustainable potential for producing sterile and biocompatible materials.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Novel Core–Shell Aerogel Formulation for Drug Delivery Based on Alginate and Konjac Glucomannan: Rational Design Using Artificial Intelligence Tools

  • Illanes Bordomás, Carlos
  • Landín Pérez, Mariana
  • García González, Carlos A.
This study explores novel alginate–konjac glucomannan core–shell aerogel particles for drug delivery systems fabricated via air-assisted coaxial prilling. A systematic approach is needed for the optimization of this method due to the numerous processing variables involved. This study investigated the influence of six variables: alginate and konjac glucomannan concentrations, compressed airflow, liquid pump pressures, and nozzle configuration. A hybrid software using Artificial Neural Networks and genetic algorithms was used to model and optimize the hydrogel formation, achieving a 100% desirable solution. The optimal formulation identified resulted in particles displaying a log-normal size distribution (R2 = 0.967) with an average diameter of 1.57 mm. Supercritical CO2 drying yielded aerogels with macropores and mesopores and a high specific surface area (201 ± 10 m2/g). The loading of vancomycin hydrochloride (Van) or a dexamethasone base (DX) into the aerogel cores during the process was tested. The aerogels exhibited appropriate structural characteristics, and both drugs showed burst release profiles with ca. 80% release within 10 min for DX and medium-dependent release for Van. This study demonstrates the feasibility of producing konjac aerogel particles for delivery systems and the high potential of AI-driven optimization methods, highlighting the need for coating modifications to achieve the desired release profiles.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Moving forward into a second golden age: Innovative and sustainable production of reprocessed starch aerogels

  • Blanco Vales, María
  • Rodríguez-Quesada, Laria F.
  • Passos, Cláudia P.
  • Carracedo Pérez, María
  • Starbird, Ricardo
  • López Iglesias, Clara
  • García González, Carlos A.
Bioaerogels are nanostructured materials with potential applications from biomedicine to environmental sciences. Their production at large scale needs to cause minimal environmental impact. Thus, designing strategies for a successful end-of-life handling is essential. Reprocessing and recycling are favorable alternatives to disposal, allowing the material to remain in use by maintaining its original properties. This work studies the reprocessing of polysaccharide aerogels into new aerogels for the first time. Three different reprocessing methods for starch aerogels are proposed, all of which avoid the use of energy-intensive techniques and hazardous reagents. These methods employ sustainable approaches (grinding, redissolving, ambient, and oven drying), and use mild, safe reagents like water and ethanol. The original and reprocessed aerogels were obtained in all cases by supercritical CO2 drying. They were then characterized and compared with each other in terms of physicochemical properties (composition, texture, crystallinity, thermal and mechanical stability). The prepared aerogels, regardless of the followed reprocessing strategy, were very similar to the original. This paves the way for their application in different production scenarios following circular economy principles.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Printed Cellulose Aerogels Minimally Cross-Linked with Polyurea: A Robust Strategy for Tissue Engineering

  • Iglesias Mejuto, Ana
  • Raptopoulos, Grigorios
  • Malandain, Nanthilde
  • Neves Amaral, Mariana
  • Ardao, Inés
  • Finšgar, Matjaž
  • Laromaine, Anna
  • Roig Serra, Anna
  • Pinto Reis, Catarina
  • García González, Carlos A.
  • Paraskevopoulou, Patrina
Cellulose and its derivatives are increasingly explored in biomedical applications due to their biocompatibility, biodegradability, and mechanical performance. In regenerative medicine, aerogel scaffolds with tunable morphology and composition are highly valued for their ability to support tissue regeneration. Three-dimensional (3D) printing offers an effective method to fabricate aerogels with hierarchical pore structures, comprising interconnected macropores and mesopores, that are crucial for tissue engineering. For clinical use, 3D printing should ensure the structural integrity of printed structures and achieve a printing resolution that allows for customization. In this work, the X-aerogel technology, implemented via polyurea cross-linking, was applied to 3D-printed cellulose structures, thereby expanding the potential applications of both technologies. Specifically, 3D-printed methylcellulose (MC) and MC doped with bacterial cellulose nanofiber (MCBCf) gels were cross-linked with an aliphatic polyurea, yielding, after supercritical drying, the corresponding (X-MC and X-MCBCf) aerogels. Elaborate characterization with ATR-FTIR, XPS, ToF-SIMS, N2 porosimetry, He pycnometry, and SEM confirmed the formation of polyurea on the biopolymer framework, reinforcing the structure and improving the mechanical properties without altering the morphology or textural characteristics of the materials. A significant outcome of cross-linking with polyurea is the long-term stability of X-MC and X-MCBCf aerogels in water, in contrast to their native counterparts, and their capacity to absorb water up to 1800% w/w within only 2 h. Preliminary biological evaluation of the materials, including in vitro (cell compatibility, hemolytic activity), in ovo (HET-CAM), and in vivo (A. salina model) tests, showed good cell viability, blood compatibility, and safety for living organisms. From a fundamental materials perspective, the most important finding of this work is the disproportionally high stability of X-MC and X-MCBCf in physiological environments, achieved with only a minimal (almost undetectable) amount of cross-linking polyurea. From an application standpoint, the findings of this study, collectively, position these aerogels as sustainable and promising candidates for tissue engineering scaffolds., This work was funded by MICIU/AEI/10.13039/501100011033 (grants PID2023-151340OB-I00, PDC2022-133526-I00, PID2021-122645OB-I00), by MCIN/AEI/10.13039/501100011033 (project PDC2023-145826-I00), by European Union ″NextGeneration EU″/PRTR, Xunta de Galicia (grant ED431C 2024/009 and GAIN - Ignicia Programme 2021, ECOBONE), ERDF/EU, and Fundação para a Ciência e Tecnologia (FCT) through projects UIDB/00645/2020 (10.54499/UIDB/00645/2020), UIDP/00645/2020 (10.54499/UIDP/00645/2020), UIDB/04138/2020 and UIDP/04138/2020. Work carried out in the framework of the ECO-AERoGELS COST Innovators’ Grant (ref IG18125) funded by the European Commission. N.M. acknowledges MICINN (PRE2019-089754) and M.N.A. FCT (SFRH/BD/05377/2021) for their PhD fellowships. A.R. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), Nanomed Hub, Conexion Nanomedicina, Nanocare Network (Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033), and the EPNOE network. The financial support by the Slovenian Research Agency (Grant No. P2-0118 and J1-60015) is gratefully acknowledged. The project is cofinanced by the Republic of Slovenia, the Ministry of Education, Science and Sport, and the European Union under the European Regional Development Fund. Financial support from the General Secretariat for Research and Innovation, Greece, and the Special Account for Research Grants of the National and Kapodistrian University of Athens is acknowledged. Covestro AG is also gratefully acknowledged for the generous supply of Desmodur N3300 Ultra., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Breathing green: Sustainable approaches for the reuse of FFP2 facemasks

  • Carracedo Pérez, María
  • Prieto López, Cristina
  • Blanco Vales, María
  • Magariños, Beatriz
  • López Iglesias, Clara
  • García González, Carlos A.
Facemasks are essential components in healthcare environments, but their disposal represents a significant environmental concern. This study proposes an optimized sterilization treatment for the reprocessing of electrostatic filter (EF) and mechanical filter (MF) facemasks using supercritical carbon dioxide (scCO2) and hydrogen peroxide, achieving a Sterility Assurance Level (SAL) of 10−6 in microbial load. The performance of the facemasks was evaluated after 1, 5, and 10 cycles and compared with those subjected to ethylene oxide and to γ-rays sterilization procedures, in terms of filtration efficiency, breathability, electrostatic charges of the filters, and of mechanical properties of the elastic bands. Structural and chemical changes were characterized using SEM and FTIR. The findings demonstrated that scCO2 treatment induced electrostatic charges in the MF, improving their filtration efficiency. The supercritical treatment also preserved the chemical and structural integrity of both types of filters. Results underscore the effectiveness of the scCO2 method as a viable and sustainable alternative to conventional sterilization methods., This work was funded by MICIU/AEI/10.13039/501100011033 [grants PID2023–151340OB-I00 and PDC2022–133526-I00], Xunta de Galicia [ED431C2022/2023], ERDF/EU and European Union NextGenerationEU/PRTR. C.L.-I. acknowledges Xunta de Galicia for a postdoctoral fellowship [ED481B-2021–008]. Work carried out in the framework of the ECO-AERoGELS COST Innovators’ Grant (ref. IG18125) and funded by the European Commission. C.P. acknowledges the funding received from the European EU4Health program (2G-Proveil - 101203379) and from CSIC through the Grants to tenured scientists from OEP 2020–2021 (2024ICT225), and the accreditation as Center of Excellence Severo Ochoa CEX2021–001189-S funded by MCIU/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Review and Perspectives on the Sustainability of Organic Aerogels

  • García González, Carlos A.
  • Blanco Vales, María
  • Barros, Joana
  • Boccia, Antonella Caterina
  • Budtova, Tatiana
  • Durães, Luisa
  • Erkey, Can
  • Gallo, Marta
  • Herman, Petra
  • Kalmár, József
  • Iglesias Mejuto, Ana
  • Malfait, Wim J.
  • Zhao, Shanyu
  • Manzocco, Lara
  • Plazzotta, Stella
  • Milovanovic, Stoja
  • Neagu, Monica
  • Nita, Loredana E.
  • Paraskevopoulou, Patrina
  • Roig Serra, Anna
  • Simón Vázquez, Rosana
  • Smirnova, Irina
  • Tomović, Željko
  • López- glesias, Clara
Aerogels are exceptionally lightweight materials characterized by their high open porosity and remarkable specific surface area, currently used across a wide array of industrial sectors from construction to energy storage and have great potential for expanding their applicability and unlocking new market opportunities. Driven by global economic growth and an intensifying environmental crisis, there is a growing demand for engineering innovations that prioritize sustainability. Aerogels are well-positioned to support these sustainability efforts. Their unique properties make them ideal for energy-saving solutions, environmental remediation, and more efficient use of resources. As the demand for eco-conscious technologies rises, aerogels are poised to contribute significantly to the development of greener, more efficient products and processes across multiple industries. The sustainability of aerogel technology is crucial for the mid-to-long-term future, yet its current status has been scarcely reviewed in the literature. This Perspective explores and critically reviews significant advances on organic and hybrid aerogels in the current socioeconomic scenario, with selected case studies endorsing their contribution to the UN Sustainable Development Goals. It also identifies research gaps while proposing innovative strategies to enhance the sustainability of aerogel production through the application of circular economy principles. Key strategies discussed involve the fabrication of aerogels using eco-friendly sources, such as biopolymers derived from biorefinery processes or from waste materials. Additionally, this Perspective examines the development of methods for the reuse, recycling, and end-of-life management of aerogels, along with the implementation of more efficient processing routes. Ultimately, this work highlights the need for comprehensive assessments of aerogel sustainability through life cycle assessment (LCA) and evaluations of safety and toxicity. By addressing these critical aspects, the potential of aerogels to contribute to a more sustainable future appears highly favorable from both commercial and research perspectives, paving the way for a circular aerogel economy and providing a lasting impact to the society in which we live., This publication is based upon work from COST Innovators’ Grant “Technical, commercial and societal innovations on aerogels towards circular economy” (ECO-AERoGELS, IG18125) supported by COST (European Cooperation in Science and Technology) and funded by the European Commission. This work was funded by MICIU/AEI/10.13039/501100011033 [grant PID2023-151340OB-I00], Xunta de Galicia [ED431C2022/2023], and ERDF/EU. C.L.-I. acknowledges Xunta de Galicia for a postdoctoral fellowship [ED481B-2021-008]. Authors thank Chang-lin Wang, Yi-Ru Chen, and Christos Pantazidis for their assistance during the preparation of the manuscript., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed