Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conversion of natural tissues and food waste into aerogels and their application in oleogelation

  • Gibowsky, Lara
  • De Berardinis, Lorenzo
  • Plazzotta, Stella
  • Manke, Erik
  • Jung, Isabella
  • Heidorn, Finnja
  • Liese, Gesine
  • Husung, Julia
  • Liese, Andreas
  • Gurikov, Pavel
  • Smirnova, Irina
  • Manzocco, Lara
  • Schroeter, Baldur
  • Méndez-Reyes, Daniel Alexander|||0000-0001-6414-305X
[EN] In this work, various natural tissues were for the first time directly converted into nanostructured aerogels by utilizing their intrinsic (meso-)porosity. In contrast to common aerogel production, no use of pure biopolymers, their extraction, dissolution, gelation or use of additives (e.g. crosslinkers, acids and bases) was necessary. The production process required washing of the wet starting material with water, a solvent exchange with ethanol and drying with supercritical CO2. The resulting materials exhibited low bulk densities (0.01-0.12 g cm-3), significant specific surface areas (108-446 m2 g-1) and mesopore volumes (0.3-2.6 cm3 g-1). Assessment of 20 different tissues including fruit pulp and peel, vegetable pulp, and mushrooms showed the generality of the approach. A broad spectrum of different microstructures was identified, whereas especially textural properties of samples derived from water rich pulp were highly similar to those found in classical biopolymer aerogels, for instance based on pectin or cellulose. Furthermore, the capability of the materials to structure liquid sunflower oil was shown: the produced oleogels exhibited exceptionally high oil uptake (max. 99%) and rheological properties similar to those of solid fats. Results suggest that supercritical drying of tissues (e.g. based on food waste) is a suitable approach for their upcycling into value added materials by a complete green and sustainable process. This research also contributes to sustainable development by transforming food waste into valuable aerogels and promoting science education through accessible, open-source STEM resources., The authors wish to acknowledge support for this research received from the Bundesministerium fuer Bildung und Forschung (BMBF) within the framework of the "Dahrendorf-project for the EU project NanoHybrids", funding code 01DT22001.This work was carried out in the frame of the COST ActionCA18125"Advanced Engineering and Research of aeroGels for Environment and Life Sciences"(AERoGELS) and funded bythe European Commission.The Accreditation as Center of Excellence Severo Ochoa IATA-CSIC, CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the use of the Theory of Critical Distances with mesh control for fretting fatigue lifetime assessment

  • Zabala, A.
  • Infante-Garcia, D.
  • Goel, S.
  • Endrino, J. L.
  • Llavori, I.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] This work analyses the viability of the theory of critical distances (TCD) using mesh control for fretting fatigue lifetime assessment. More than seven hundred sets of simulations were performed by taking seventy different experimental tests reported previously in the literature. The outcome of the present study suggests that the TCD mesh control method can be extended to fretting fatigue problems by the reasonable assumption of setting the right element size proportional to critical distance. In this study, a significant computational time reduction of up to 97% was obtained. Thus, this study provides a simple method to design complex 3D industrial components subjected to fretting fatigue phenomena using finite element analysis efficiently without requiring complex remeshing techniques, Surface Technologies Research Group at Mondragon University gratefully acknowledge the financial support given by the Eusko Jaurlaritza under the "Programa de apoyo a la investigacion colaborativa en areas estrategicas" (Project MULTIMAT+: Ref. KK-2019/00067) program. The financial support given by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the FEDER program through the projects DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and the FPI subprogram with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. SG and JLE acknowledges the support of the "Centre for Doctoral Training in Ultra-Precision" at Cranfield University (EP/L016567/1). We would like to acknowledge the support from the Isambard Bristol, UK supercomputing service extended via the Resource Allocation Panel (RAP) grant and financial help from other grants such as RCUK (Grant No. EP/S013652/1 and EP/S036180/1), Cost Actions (CA15102 and CA18125) from H2020 and Royal Academy of Engineering (Grant No. IAPP18-19\295). JLE would like to acknowledge the Department of Economic Development and Infrastructure of the Basque Country (Elkartek Program, KK-2019/00062)
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Engineering aerogel particles as next-generation drug delivery systems: a comprehensive review of recent advances

  • Gomes, Susana M.
  • Illanes Bordomás, Carlos
  • García González, Carlos A.
  • Akgün, Işık Sen
Aerogels, defined as low-density solid materials with high porosities, open pore structures, and high specific surface areas, have shown increasing interest among the scientific and industrial communities. The engineering of aerogels in the form of spherical particles has been well documented for several applications and recent studies have highlighted the promising potential of use them as drug delivery systems. Therefore, this review article consolidates the recent progress on aerogel particle technology by providing a comprehensive and focused synthesis of the state-of-the-art of aerogel particle design specifically intended to enhance biocompatibility, stability, and targeted drug delivery. The engineering technologies herein presented, based on droplets production and on the milling technology, are critically discussed, highlighting critical aspects used to control their features. Moreover, surface modification and coating techniques are critically examined as tools to enhance biocompatibility, colloidal stability, and targeted delivery. Then, key results in the diverse biomedical applications, namely for oral, skin and pulmonary drug delivery, were discussed. In oral delivery, their capacity to improve drug loading and enable sustained release is emphasized. In skin delivery, aerogels show potential to enhance dermal permeation and provide a sustained release. For pulmonary administration, their low density and aerodynamic properties make them ideal for deep lung deposition. By bridging particle engineering with therapeutic functionality, this review highlights the unique features and advantages of aerogel particles to become the next-generation aerogel-based therapeutic systems. Finally, the current challenges to be addressed and future trends are identified.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards the Optimization of Polyurethane Aerogel Properties by Densification: Exploring the Structure– Properties Relationship

  • Merillas, Beatriz
  • García-González, Carlos A.
  • Gómez Álvarez-Arenas, Tomás
  • Rodríguez-Pérez, Miguel Angel
12 páginas, 9 figuras, 4 tablas., The aerogel performance for industrial uses can be tailored using several chemical and physical strategies. The effects of a controlled densification on polyurethane aerogels are herein studied by analyzing their textural, mechanical, sound, optical, and thermal insulating properties. The produced aerogels are uniaxially compressed to different strains (30%–80%) analyzing the consequent changes in the structures and, therefore, final properties. As expected, their mechanical stiffness can be significantly increased by compression (until 55-fold higher elastic modulus for 80%-strain), while the light transmittance does not noticeably worsen until it is compressed more than 60%. Additionally, the modifications produced in the heat transfer contributions are analyzed, obtaining the optimum balance between density increase and pore size reduction. The minimum thermal conductivity (14.5%-reduction) is obtained by compressing the aerogel to 50%-strain, where the increment in the solid conduction is surpassed by the reduction of the radiative and gas contributions. This strategy avoids tedious chemical modifications in the synthesis procedure to control the final structure of the aerogels, leading to the possibility of carefully adapting their structure and properties through a simple method such as densification. Thus, it allows to obtain aerogels for current and on-demand applications, which is one of the main challenges in the field., Financial assistance from Ministerio de Ciencia, Innovación y Universidades (MCIU) (Spain) (PID2021- 127108OB-I00, TED2021-130965B-I00, and PDC2022-133391-I00), Regional Government of Castilla y León and the EU-FEDER program (CLU-2019-04) are gratefully acknowledged. This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León), and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR. (C17. I1). This publication is based upon work from ECO-AERoGELS COST Innovation Grant (ref. IG18125) supported by the European Commission., Peer reviewed