Pasar al contenido principal

OPTIMIZACION DE PROCESOS DE ACABADO DE COMPONENTES CRITICOS DE AERO-REACTORES

BES-2015-072070

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD CARLOS III DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The minimum shear stress range criterion and its application to crack orientation prediction in incomplete contact fretting problems

  • Infante, Diego
  • Llavori, I.
  • Zabala, A.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] A proper prediction of crack paths is required when assessing accurately the fatigue crack propagation life. Recently, some authors have pointed out that the criterion of minimum shear stress range leads to inconsistent results when predicting fretting crack paths under incomplete contacts. In this paper, different fretting experiments with cylinder-to-flat contact found in the literature are reviewed, and the corresponding crack path prediction using the extended finite element method and the minimum shear stress range crack orientation criterion is performed. Results show the applicability of the criterion to predict the crack orientation during stage II in incomplete contact fretting problems., The authors gratefully acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness and the FEDER program through the project DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and DPI2014-56137-C2-2-R and the FPI subprogram associated to the project with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. The financial support given by the Eusko Jaurlaritza under "Programa de apoyo a la investigacion colaborativa en areas estrategicas" (Project MEDECA: Ref. KK-2017/00053, and MEDECA2: Ref. KK-2018/00013) programs is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the use of the Theory of Critical Distances with mesh control for fretting fatigue lifetime assessment

  • Zabala, A.
  • Infante-Garcia, D.
  • Goel, S.
  • Endrino, J. L.
  • Llavori, I.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] This work analyses the viability of the theory of critical distances (TCD) using mesh control for fretting fatigue lifetime assessment. More than seven hundred sets of simulations were performed by taking seventy different experimental tests reported previously in the literature. The outcome of the present study suggests that the TCD mesh control method can be extended to fretting fatigue problems by the reasonable assumption of setting the right element size proportional to critical distance. In this study, a significant computational time reduction of up to 97% was obtained. Thus, this study provides a simple method to design complex 3D industrial components subjected to fretting fatigue phenomena using finite element analysis efficiently without requiring complex remeshing techniques, Surface Technologies Research Group at Mondragon University gratefully acknowledge the financial support given by the Eusko Jaurlaritza under the "Programa de apoyo a la investigacion colaborativa en areas estrategicas" (Project MULTIMAT+: Ref. KK-2019/00067) program. The financial support given by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the FEDER program through the projects DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and the FPI subprogram with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. SG and JLE acknowledges the support of the "Centre for Doctoral Training in Ultra-Precision" at Cranfield University (EP/L016567/1). We would like to acknowledge the support from the Isambard Bristol, UK supercomputing service extended via the Resource Allocation Panel (RAP) grant and financial help from other grants such as RCUK (Grant No. EP/S013652/1 and EP/S036180/1), Cost Actions (CA15102 and CA18125) from H2020 and Royal Academy of Engineering (Grant No. IAPP18-19\295). JLE would like to acknowledge the Department of Economic Development and Infrastructure of the Basque Country (Elkartek Program, KK-2019/00062)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the effect of out-of-phase biaxial fatigue loads on crack paths in cruciform specimens using XFEM

  • Infante, Diego
  • Qian, Guian
  • Miguélez, María Henar
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] In the present research work, a numerical crack growth analysis using linear elastic fracture mechanics is carried out paying attention to the crack paths that grow in the central part of cruciform specimens under biaxial fatigue loads. The crack propagation in this type of specimens has been studied using the extended finite element method (XFEM). The objective is to analyse the effect of different phase angles under biaxial fatigue loads and to assess the different orientation criteria for nonproportional loading, benefiting from the advantages of XFEM. The crack path and the stress intensity factor range of a crack either aligned or inclined to the load directions have been investigated using different crack orientation criteria. Symmetrical branching is predicted for an initial crack inclined at 45 degrees with phase angle of loading equal to 90 degrees and 180 degrees. Numerical results are in good agreement with the experimental observations found in the literature, although the study reveals important differences in the crack path predictions depending on the orientation criteria., The authors gratefully acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness and the FEDER program through the project DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and DPI2014-56137-C2-2-11 and the FPI subprogram associated to the project with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. Guian Qian is grateful for the financial support by the National Natural Science Foundation of China (No.11872364).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparison between some fracture modelling approaches in 2D LEFM using finite elements

  • Marco, Miguel
  • Infante-García, Diego
  • Belda Ricardo|||0000-0003-3913-5773
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] The finite element method has been widely used to solve different problems in the field of fracture mechanics. In the last two decades, new methods have been developed to improve the accuracy of the solution in 2D linear elastic fracture mechanics problems, such as the extended finite element method (XFEM) or the phantom node method (PNM). The goal of this work is to quantify the differences between some numerical approaches: standard finite element method (FEM), mechanical property degradation, interelemental crack method with multi-point constraints, XFEM and PNM. We explain the different techniques analysed together with their advantages and disadvantages. We compare these numerical techniques to model fracture using problems of reference with known solutions, evaluating their behaviour in terms of convergence with respect to the element size and accuracy of the stress intensity factor (SIF), stresses ahead the crack tip and crack propagation prediction. Some of the new techniques have shown a better accuracy in SIF calculation or stress fields ahead the crack tip and other lead to high errors in local results estimations. However, all methods reviewed here can predict crack propagation for the problems of reference of this work, showing good accuracy in crack orientation prediction., The authors gratefully acknowledge the funding support received from the Spanish Ministerio de Ciencia, Innovacion y Universidades and the FEDER operation program in the framework of the projects DPI2017-89197-C2-1-R and DPI2017-89197-C2-2-R and the FPI subprograms BES-2014-068473 and BES-2015-072070. The financial support of the Generalitat Valenciana through the Programme PROMETEO 2016/007 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Critical analysis of the suitability of crack propagation direction criteria for 2D cylindrical plain fretting contact

  • Llavori, I.
  • Zabala, A.
  • Infante, Diego
  • Aginagalde, A.
  • Rodríguez-Flórez, N.
  • Gómez, X.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] In this work the suitability of the criterion of maximum effective amplitude of the normal stress (Delta sigma(n,eff))(max) and the criterion of minimum shear stress range (Delta tau)(min) for 2D cylindrical plain fretting contact condition has been analysed. The numerical analysis has been performed by means of the extended finite element method, which takes into account the contact between crack faces during the closing part, and the results have been compared with experiments reported in the literature. Results show that overall the (Delta tau)(min) criterion predominates in intermediate stage, while the (Delta sigma(n,eff))(max) shows less deviation in the final stage. However, the predicted crack path by the latter criterion shifts toward the outer side, which do not correlate with the experimental results reported in the literature. Additional studies should investigate the variables that are affecting this change in the behaviour along the crack in order to set a criteria that is able to predict the plain fretting condition crack paths accurately., This work was financially supported by the the Basque Government under the "Proyectos de Investigacion Basica y/o Aplicada" (Project NUSIMCO: Ref. PI2013-23), the Spanish Ministry of Science, Innovation and Universities (grant number DPI2017-89197-C22-R) and the Generalitat Valenciana (Programme PROMETEO 2016/007). Furthermore, the authors gratefully acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness and the FEDER program through the project DPI2014-56137-C2-2-R and the FPI subprogram associated to the project with the reference BES-2015-072070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of the influence of micro-voids on fretting fatigue crack initiation lifetime

  • Infante-García, Diego
  • Miguélez, María Henar
  • Wahab, Magd Abdel
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] In this paper, the influence of the heterogeneity in the predicted crack initiation lifetime under fretting fatigue conditions is analysed for a regular and a random distribution of micro-voids. A critical plane analysis with two multiaxial damage criteria is performed to assess the crack initiation lifetime. The predicted initiation lifetime in the heterogeneous material is compared with the results obtained in the homogeneous case. The numerical results show that the heterogeneity has a noticeable influence on the predicted initiation lifetime. Furthermore, the numerical model suggests that a crack may firstly initiate at the upper edge of the micro-voids located close to the contact edge, leading to a mean reduction of the predicted crack initiation lifetime. However, in some cases, the introduction of micro-voids reduces the stress intensity at the contact edge and thus decreasing the predicted crack initiation lifetime., The authors gratefully acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness and the FEDER program through the projects DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and the FPI subprogram with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged.r The last author would like to acknowledge the financial support of the Research Foundation-Flanders (FWO), The Luxembourg National Research Fund (FNR) and Slovenian Research Agency (ARRS) in the framework of the FWO Lead Agency project: G018916N 'Multi-analysis of fretting fatigue using physical and virtual experiments'.