Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 234
Encontrada(s) 3 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monte Carlo simulations for the ANTARES underwater neutrino telescope

  • Albert, A.
  • Andre, M.
  • Anghinolfi, M.
  • Anton, G.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bertin, V.
  • Biagi, S.
  • Bissinger, M.
  • Boumaaza, J.
  • Bouta, M.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
[EN] Monte Carlo simulations are a unique tool to check the response of a detector and to monitor its performance. For a deep-sea neutrino telescope, the variability of the environmental conditions that can a ect the behaviour of the data acquisition system must be considered, in addition to a reliable description of the active parts of the detector and of the features of physics events, in order to produce a realistic set of simulated events. In this paper, the software tools used to produce neutrino and cosmic ray signatures in the telescope and the strategy developed to represent the time evolution of the natural environment and of the detector e ciency are described., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariata l'energie atomique et auxenergies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia e Innovacion (MCI) and Agencia Estatal de Investigacion: Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -BC44) (MCI/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider, Junta de Andaluca (ref. SOMM17/6104/UGR and A-FQM-053-UGR18), Generalitat Valenciana: Grisola (ref. GRISOLIA/2018/119), Spain; Ministry of Higher Education, Scientific Research and Professional Training, Morocco. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination

  • Díaz-Escobar, Evelyn
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda-Gómez, Ángela Inmaculada
[EN] Anapole states¿characterized by a strong suppression of far-field scattering¿naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular, the non-cancelation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way toward the use of different anapole states in photonic integrated circuits either on silicon or other high-index dielectric materials., This work was supported by Generalitat Valenciana under Grant No. GRISOLIAP/2018/164, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through the International Research Training Group (IRTG) 2675 "Meta-ACTIVE," Project No. 437527638, and Generalitat Valenciana (Grant Nos. PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plant virus evolution under strong drought conditions results in a transition from parasitism to mutualism

  • González, Rubén
  • Butkovic, Anamarija
  • Escaray, Francisco J.
  • Martínez-Latorre, Javier
  • Melero, Izan
  • Pérez-Parets, Enric
  • Gómez-Cadenas, Aurelio
  • Carrasco, Pedro
  • Elena, Santiago F.
[EN] Environmental conditions are an important factor driving pathogens' evolution. Here, we explore the effects of drought stress in plant virus evolution. We evolved turnip mosaic potyvirus in well-watered and drought conditions in Arabidopsis thaliana accessions that differ in their response to virus infection. Virus adaptation occurred in all accessions independently of watering status. Drought-evolved viruses conferred a significantly higher drought tolerance to infected plants. By contrast, nonsignificant increases in tolerance were observed in plants infected with viruses evolved under standard watering. The magnitude of this effect was dependent on the plant accessions. Differences in tolerance were correlated to alterations in the expression of host genes, some involved in regulation of the circadian clock, as well as in deep changes in the balance of phytohormones regulating defense and growth signaling pathways. Our results show that viruses can promote host survival in situations of abiotic stress, with the magnitude of such benefit being a selectable trait., We thank Francisca de la Iglesia and Paula Agudo for excellent technical assistance. This work was supported by Grants PID2019103998GB-I00 and BES-2016-077078 (Agencia Estatal de Investigacion-Fondo Europeo de Desarrollo Regional) to S.F.E. and R.G., respectively; GRISOLIAP/2018/005 and PROMETEU2019/012 (Generalitat Valenciana) to S.F.E.; and AICO/2019/150 (Generalitat Valenciana) to A.G.-C. Phytohormone measurements were performed at the Servei Central d'Instrumentacio Cientifica of Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the potential cosmogenic origin of the ultra-high-energy event KM3-230213A

  • Adriani, O.
  • Aiello, S.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Andre, M.
  • Aphecetche, L.
  • Argüelles, C.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] On 2023 February 13, the KM3NeT/ARCA telescope observed a track-like event compatible with a ultra-highenergy muon with an estimated energy of 120 PeV, produced by a neutrino with an even higher energy, making it the most energetic neutrino event ever detected. A diffuse cosmogenic component is expected to originate from the interactions of ultra-high-energy cosmic rays with ambient photon and matter fields. The flux level required by the KM3NeT/ARCA event is, however, in tension with the standard cosmogenic neutrino predictions based on the observations collected by the Pierre Auger Observatory and Telescope Array over the last decade of the ultra-highenergy cosmic rays above the ankle (hence from the local Universe, z ¿ 1). We show here that both observations can be reconciled by extending the integration of the equivalent cosmogenic neutrino flux up to a redshift of zmax = 6 and considering either source evolution effects or the presence of a subdominant independent proton component in the ultra-high-energy cosmic-ray flux, thus placing constraints on known cosmic accelerators., The authors acknowledge the financial support of the KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No. 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation; Czech Science Foundation (GAČR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Européenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Île-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, the Provence-Alpes-Côte d Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Côte d Azur region, the Bouches-du-Rhône Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, the CNRS Institut National de Physique Nucléaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia. This work is part of the MuSES project, which has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 Research and Innovation Programme (grant agreement No. 101142396). This work was supported by the European Research Council, ERC starting grant MessMapp, under contract No. 949555. The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell Università e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A.D.B., W.I.I., M.B., A.N., G.P., I.C.R., and A.S. have been supported by the Italian Ministero dell Università e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant AstroCeNT: Particle Astrophysics Science and Technology Centre, carried out within the International Research Agendas program of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; The program: Excellence initiative-research university for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/ 2/ST6/00004 and ARTIQ/0004/2021; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe, for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for grant AST22_6.2 with funding from Consejería de Universidad, Investigación e Innovación and Gobierno de España and European Union NextGenerationEU, for CSICINFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; the European Union s Horizon 2020 Research and Innovation Programme (ChETECINFRA Project No. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Focusing performance of Fibonacci tiling-based zone plates

  • Garmendía-Martínez, Adrián
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Furlan, Walter D.
[EN] In this work, we present the Fibonacci Tiling-Based Zone Plates (FTZPs) characterized by a Fibonacci binary array generated using complementary substitution rules applied in both horizontal and vertical directions. The resulting array forms a quasiperiodic structured pattern where each row and column corresponds to a Fibonacci sequence or its Boolean complement. This array defines a transmittance function in a normalized spatial domain, partitioned into rectangulars sub-regions. Unlike conventional Fibonacci zone plates, which feature concentric rings, the FTZP consists of transparent and opaque rectangles, offering unique optical properties advantageous for diffraction-based applications. The intensity distribution along the optical axis and the evolution of transverse diffraction patterns are investigated through both numerical simulation and experimental measurements., This research was funded by grants from the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and the Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-10-24) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the fabrication process and fluoride content on the tribocorrosion behaviour of Ti6Al4V biomedical alloy in artificial saliva

  • LICAUSI, MARIE-PIERRE
  • Igual Muñoz, Anna Neus
  • Amigó, Vicente|||0000-0002-2107-0273
Titanium and its alloys are widely used as dental implants due to their low density, excellent biocompatibility, mechanical properties and corrosion resistance. However, during their life time Ti6Al4V biomedical alloys are subjected to different mechanical actions (i.e.,sliding or fretting), thus resulting in a tribocorrosion system, which is an irreversible materia ldegradation process due to the combine deffect of corrosion and wear. In this study, the tribo-electrochemical behavior of cast and sintered (by powder metallurgy) Ti6Al4V alloy in artificial human saliva solution with out and with fluoride additions of 100 ppm and 1000 ppm and in an average industrial mouth wash solution with a 112 ppm fluoride content have been investigated by different electrochemical techniques. The same tribocorrosion mechanisms were found in the cast and sintered titanium alloys, although slightly different wear debris behavior was observed. At low applied passive potentials, wear rates are similar to those obtained under equilibrium conditions (Open Circuit Potential). There exists a critical fluoride concentration above which corrosion and tribocorrosion rates increase., We wish to express our gratitude to the Ministerio de Ciencia e Innovacion of the Spanish government for the financial support under the project MAT2011-22481 and to the Comunidad Valenciana for the grant GRISOLIAP/2010/038.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement of neutrino oscillation parameters with the first six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A.R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study oscillations of atmospheric neutrinos and determine the neutrino mass ordering. This paper focuses on an initial configuration of ORCA, referred to as ORCA6, which comprises six out of the foreseen 115 detection units of photo-sensors. A high-purity neutrino sample was extracted, corresponding to an exposure of 433 kton-years. The sample of 5828 neutrino candidates is analysed following a binned log-likelihood method in the reconstructed energy and cosine of the zenith angle. The atmospheric oscillation parameters are measured to be sin(2)theta(23) = 0.51(-0.05)(+0.04), and Delta m(31)(2) = 2.18(-0.35)(+0.25) x 10(-3) eV(2) boolean OR {-2.25,-1.76} x 10(-3) eV(2) at 68% CL. The inverted neutrino mass ordering hypothesis is disfavoured with a p-value of 0.25., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union -NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union -NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constraints on the energy spectrum of the diffuse cosmic neutrino flux from the ANTARES neutrino telescope

  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Becherini, Y.
  • Belhorma, B.
  • Bendahman, M.
  • Benfenati, F.
  • Bertin, V.
  • Biagi, S.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
[EN] High-significance evidences of the existence of a high-energy diffuse flux of cosmic neutrinos have emerged in the last decade from several observations by the IceCube Collaboration. The ANTARES neutrino telescope took data for 15 years in the Mediterranean Sea, from 2007 to 2022, and collected a high-purity all-flavour neutrino sample. The search for a diffuse cosmic neutrino signal using this dataset is presented in this article. This final analysis did not provide a statistically significant observation of the cosmic diffuse flux. However, this is converted into limits on the properties of the cosmic neutrino spectrum. In particular, given the sensitivity of the ANTARES neutrino telescope between 1 and 50 TeV, constraints on single-power-law hypotheses are derived for the cosmic diffuse flux below 20 TeV, especially for power-law fits of the IceCube data with spectral index softer than 2.8., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat à l énergie atomique et aux énergies alternatives (CEA), Commission Européenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Région Alsace (contrat CPER), Région Provence-Alpes-Côte d Azur, Département du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium für Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Romanian Ministry of Research, Innovation and Digitalisation (MCID), Romania; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejería de Universidad, Investigación e Innovación and Gobierno de España and European Union NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D Printing for Dissemination of Maya Architectural Heritage: The Acropolis of La Blanca (Guatemala)

  • Montuori, Riccardo
  • Rosado-Torres, Ana Laura
  • Gilabert Sansalvador, Laura|||0000-0001-7890-5334
[EN] This paper focuses on the use of 3D printing as a tool for the dissemination of Maya architectural heritage. The case study is the Acropolis of La Blanca, the main complex of this archaeological site located in the Peten department, Guatemala. One of the objectives of La Blanca Project was to create a model of the Acropolis as part of the strategy for dissemination and as a didactical resource for the Visitor Center. The documentation of this architectural complex with digital survey techniques allowed to obtain a high-fidelity model of the Acropolis¿ buildings. In order to achieve this goal, it was necessary to develop a methodology for the reverse modelling of the Acropolis, starting from the data obtained by laser scanning. We developed a workflow to create a virtual replica of the Acropolis optimized for 3D printing. This model was first printed in 17 parts by using the FDM technology. Then, it was transported to Guatemala and, finally, it was reassembled and placed at the Visitor Center. Today, this physical replica of the Acropolis is an important resource that allows the visitors to have a complete view of the main complex of the site, which is not easy in the Guatemalan jungle. It also provides an exclusive view of some parts of the Acropolis, already studied by researchers and now protected with a soil layer to ensure their preservation. Moreover, it is a useful resource for supporting dissemination and also serves as a teaching resource for student visitors., This work was funded by the Universitat Politècnica de València through the Research and Development Grants Program (PAID-01-17); by the Spanish Ministry of Science, Innovation and Universities through the Aid Program for predoc contracts for the training of doctors (ref. BES-2015- 071296) and by Generalitat Valenciana through the Santiago Grisolía grants Program (GRISOLIAP/2018/139). This study is also part of the research project Arquitectura Maya: Sistemas Constructivos, Estética Formal, Simbolismo y Nuevas Tecnologías (PGC2018-098904-B-C21-AR), funded by the Spanish Ministry of Science, Innovation and Universities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Addendum: Measurement of neutrino oscillation parameters with the first six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] In this short note, references to data and analysis software to reproduce the results of the paper are given., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GAR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA - Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The KM3NeT potential for the next core-collapse supernova observation with neutrinos

  • Aiello, S.
  • Albert, A.
  • Garre, S. Alves
  • Aly, Z.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Anton, G.
  • Aublin, J.
  • Bagatelas, C.
  • Bou Cabo, Manuel
  • Diego-Tortosa, Dídac
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] The KM3NeT research infrastructure is under construction in the Mediterranean Sea. It consists of two water Cherenkov neutrino detectors, ARCA and ORCA, aimed at neutrino astrophysics and oscillation research, respectively. Instrumenting a large volume of sea water with 6200 optical modules comprising a total of 200,000 photomultiplier tubes, KM3NeT will achieve sensitivity to 10 MeV neutrinos from Galactic and near-Galactic core-collapse supernovae through the observation of coincident hits in photomultipliers above the background. In this paper, the sensitivity of KM3NeT to a supernova explosion is esti- mated from detailed analyses of background data from the first KM3NeT detection units and simulations of the neutrino signal. The KM3NeT observational horizon (for a 5 ¿ discovery) covers essentially the Milky-Way and for the most optimistic model, extends to the Small Magellanic Cloud (60 kpc). Detailed studies of the time profile of the neutrino signal allow assessment of the KM3NeT capability to deter- mine the arrival time of the neutrino burst with a few millisec- onds precision for sources up to 5¿8 kpc away, and detecting the peculiar signature of the standing accretion shock insta- bility if the core-collapse supernova explosion happens closer than 3¿5 kpc, depending on the progenitor mass. KM3NeT¿s capability to measure the neutrino flux spectral parameters is also presented., X The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education Scientific Research and Professional Training, ICTP through Grant AF-13, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR), Generalitat Valenciana: Grisolia (ref. GRISO-LIA/2018/119) and GenT (ref. CIDEGENT/2018/034 and CIDE-GENT/2019/043) programs, La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 713673), Spain. This work has also received funding from the European Union'sHorizon 2020 research and innovation program under Grant agreement no 739560.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein adsorption/desorption dynamics on Ca-enriched titanium surfaces: biological implications

  • Romero-Gavilán, Francisco
  • Cerqueira, Andreia
  • Anitua, Eduardo
  • Tejero, Ricardo
  • García-Arnáez, Iñaki
  • Ozturan, Seda
  • Izquierdo, Raul
  • Azkargorta, Mikel
  • Elortza, Félix
  • Gurruchaga, Mariló
  • Goñi, Isabel
  • Suay, Julio
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Calcium ions are used in the development of biomaterials for the promotion of coagulation, bone regeneration, and implant osseointegration. Upon implantation, the time-dependent release of calcium ions from titanium implant surfaces modifies the physicochemical characteristics at the implant-tissue interface and thus, the biological responses. The aim of this study is to examine how the dynamics of protein adsorption on these surfaces change over time. Titanium discs with and without Ca were incubated with human serum for 2 min, 180 min, and 960 min. The layer of proteins attached to the surface was characterised using nLC-MS/MS. The adsorption kinetics was different between materials, revealing an increased adsorption of proteins associated with coagulation and immune responses prior to Ca release. Implant-blood contact experiments confirmed the strong coagulatory effect for Ca surfaces. We employed primary human alveolar osteoblasts and THP-1 monocytes to study the osteogenic and inflammatory responses. In agreement with the proteomic results, Ca-enriched surfaces showed a significant initial inflammation that disappeared once the calcium was released. The distinct protein adsorption/desorption dynamics found in this work demonstrated to be useful to explain the differential biological responses between the titanium and Ca-ion modified implant surfaces., This work was supported by MINECO [MAT2017-86043-R; RTC-2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091; APOSTD/2020/036, PROMETEO/2020/069], Universitat Jaume I under [ UJI-B2017-37], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega and Iraide Escobes for their valuable technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges-Gutierrez, Hylenne
  • Martínez-Abad, Antonio
  • Marta Martínez-Sanz
  • Vilaplana Domingo, Francisco Javier
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe , by the European Union or by the European Union NextGenerationEU/PRTR . H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of host genetic diversity for susceptibility-to-infection in the evolution of virulence of a plant virus

  • González, Rubén
  • Butkovic, Anamarija
  • ELENA FITO, SANTIAGO FCO
[EN] Predicting viral emergence is difficult due to the stochastic nature of the underlying processes and the many factors that govern pathogen evolution. Environmental factors affecting the host, the pathogen and the interaction between both are key in emergence. In particular, infectious disease dynamics are affected by spatiotemporal heterogeneity in their environments. A broad knowledge of these factors will allow better estimating where and when viral emergence is more likely to occur. Here, we investigate how the population structure for susceptibility-to-infection genes of the plant Arabidopsis thaliana shapes the evolution of Turnip mosaic virus (TuMV). For doing so we have evolved TuMV lineages in two radically different host population structures: (1) a metapopulation subdivided into six demes (subpopulations); each one being composed of individuals from only one of six possible A. thaliana ecotypes and (2) a well-mixed population constituted by equal number of plants from the same six A. thaliana ecotypes. These two populations were evolved for twelve serial passages. At the end of the experimental evolution, we found faster adaptation of TuMV to each ecotype in the metapopulation than in the well-mixed heterogeneous host populations. However, viruses evolved in well-mixed populations were more pathogenic and infectious than viruses evolved in the metapopulation. Furthermore, the viruses evolved in the demes showed stronger signatures of local specialization than viruses evolved in the well-mixed populations. These results illustrate how the genetic diversity of hosts in an experimental ecosystem favors the evolution of virulence of a pathogen., We thank Francisca de la Iglesia for continuous excellent technical support. Work was supported by Spain's Agencia Estatal de Investigacion-FEDER grant BFU2015-65037-P and Generalitat Valenciana grant GRISOLIA/2018/005 to S.F.E. R.G. was supported by Spain's Agencia Estatal de Investigacion pre-doctoral contract BES-2016-077078.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Gutiérrez-Ramírez, Manuel
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • Esquerdo Lloret, Tomás Vicente
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N¿-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated., This research was developed under project PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021- 1231240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program) funded by Generalitat Valenciana, Spain; and under project UAFPU20-23 funded by Universidad de Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Exploring the Impact of Low-Temperature Pre-Treatments in the Maturation of the European Eel

  • Pires Ferrão, María Leonor
[ES] El capítulo 1 explora los efectos del pretratamiento con agua de mar fría en la maduración sexual de las anguilas europeas machos antes de aplicar un tratamiento hormonal estándar. El estudio tuvo como objetivo reducir la dependencia de los tratamientos hormonales o, al menos, mejorar el rendimiento reproductivo de los machos. Las anguilas macho fueron expuestas a agua de mar a 10 °C durante 2 o 4 semanas, y se evaluaron parámetros biométricos. Se recolectaron muestras de sangre y testículos para el análisis de esteroides sexuales y el estudio histológico. El pretratamiento con temperaturas bajas estimuló la maduración sexual temprana, aumentó la producción de esteroides y aumentó la diferenciación de las espermatogonias. Las anguilas pretratadas durante 4 semanas mostraron un índice gonadosomático más alto y mayores niveles de andrógenos (T, 11-KT) y estradiol (E2), mientras que el pretratamiento de 2 semanas indujo niveles más altos de progestinas (DHP). Tras el pretratamiento, las anguilas sometidas al tratamiento hormonal estándar iniciaron antes la espermiación y mostraron mayor densidad espermática, movilidad y parámetros cinéticos. Este enfoque fue económicamente eficaz, mejorando la producción de esperma de alta calidad y sugiriendo la inducción de una mayor sensibilidad hormonal debida al pretratamiento con agua de mar fría. El capítulo 2 se centró en la caracterización, análisis filogenético y sinténico de las superóxido dismutasas (SOD) en la anguila europea, enzimas antioxidantes cruciales sobre las que hay información limitada en teleósteos. Se identificaron las secuencias de SOD en varios vertebrados, revelando una SOD1 y dos SOD2/3 (a y b) en las anguilas, probablemente originado del evento de duplicación del genoma específico de los teleósteos (WGD). El análisis de expresión mostró patrones específicos de tejido y dependientes del sexo, con una expresión de SOD1 más alta en hembras, SOD2a y SOD2b dominando en los tejidos cerebro-hipófisis-gónada, y los parálogos de SOD3 con perfiles específicos de tejido. El uso de diferentes protocolos de maduración reveló que la expresión de SOD1 y SOD2a/b aumenta con la salinidad al inicio del tratamiento hormonal estándar. Además, el pretratamiento con agua de mar fría redujo la expresión de SOD1, pero incrementó la de SOD3a. Este estudio demostró que los perfiles de expresión de las SODs se modulan con los cambios ambientales y los tratamientos de maduración. Este estudio demostró los niveles de expresión de las SOD a los cambios ambientales y a los tratamientos de maduración. El capítulo 3 es un estudio de la familia de genes factores de transcripción de choque térmico (HSF), que regula las respuestas a los cambios ambientales y respalda procesos como la espermatogénesis. Los análisis BLAST y filogenéticos identificaron cinco HSFs conocidos (HSF1-5) y un nuevo HSF6 en vertebrados, con dos parálogos HSF1 (HSF1a y HSF1b) encontrados en anguilas probablemente originado en el evento de duplicación del genoma específico de los teleósteos. El análisis de expresión mostró niveles significativos de todos los genes HSF en los testículos y otros tejidos, como el cerebro y las branquias. Bajo diferentes temperaturas (10 vs. 20 °C) y condiciones de salinidad, solo la expresión de HSF1 fue modulada, lo que podría sugerir su papel en la detección de cambios ambientales durante la migración de esta especie. El tratamiento hormonal con hCGrec resultó en una disminución de la expresión de los HSF durante la maduración, con cambios notables en HSF1a y HSF4, mientras que HSF5 alcanzó su punto máximo después de 4 semanas de tratamiento hormonal estándar. Estos resultados sugieren posibles roles de los genes HSF en la gametogénesis y la respuesta de las anguilas europeas a los cambios en el entorno durante su migración reproductiva., [CA] El capítol 1 explora els efectes del pretractament amb aigua de mar freda en la maduració sexual de les anguiles europees mascles abans d'aplicar un tractament hormonal estàndard. L'estudi va tindre com a objectiu reduir la dependència dels tractaments hormonals o, almenys, millorar el rendiment reproductiu dels mascles. Les anguiles mascle van ser exposades a aigua de mar a 10 °C durant 2 o 4 setmanes, i es van avaluar paràmetres biomètrics. Es van recollir mostres de sang i testicles per a l'anàlisi d'esteroides sexuals i l'estudi histològic. El pretractament amb temperatures baixes va estimular la maduració sexual primerenca, va augmentar la producció d'esteroides i va incrementar la diferenciació de les espermatogònies. Les anguiles pretractades durant 4 setmanes van mostrar un índex gonadosomàtic més alt i majors nivells d'andrògens (T, 11-KT) i estradiol (E2), mentre que el pretractament de 2 setmanes va induir nivells més alts de progestines (DHP). Després del pretractament, les anguiles sotmeses al tractament hormonal estàndard van iniciar abans l'espermiació i van mostrar major densitat espermàtica, mobilitat i paràmetres cinètics. Aquest enfocament va ser econòmicament eficaç, millorant la producció d'esperma d'alta qualitat i suggerint la inducció d'una major sensibilitat hormonal a causa del pretractament amb aigua de mar freda. El capítol 2 es va centrar en la caracterització, anàlisi filogenètic i sintènic de les superòxid dismutases (SOD) en l'anguila europea, enzims antioxidants crucials sobre els quals hi ha informació limitada en teleostis. Es van identificar les seqüències de SOD en diversos vertebrats, revelant una SOD1 i dues SOD2/3 (a i b) en les anguiles, probablement originades de l'esdeveniment de duplicació del genoma específic dels teleostis (WGD). L'anàlisi d'expressió va mostrar patrons específics de teixit i dependents del sexe, amb una expressió de SOD1 més alta en femelles, SOD2a i SOD2b dominant en els teixits cervell-hipòfisi-gònada, i els paràlegs de SOD3 amb perfils específics de teixit. L'ús de diferents protocols de maduració va revelar que l'expressió de SOD1 i SOD2a/b augmenta amb la salinitat a l'inici del tractament hormonal estàndard. A més, el pretractament amb aigua de mar freda va reduir l'expressió de SOD1, però va incrementar la de SOD3a. Aquest estudi va demostrar que els perfils d'expressió de les SODs es modulen amb els canvis ambientals i els tractaments de maduració. El capítol 3 és un estudi de la família de gens factors de transcripció de xoc tèrmic (HSF), que regula les respostes als canvis ambientals i recolza processos com l'espermatogènesi. Els anàlisis BLAST i filogenètics van identificar cinc HSF coneguts (HSF1-5) i un nou HSF6 en vertebrats, amb dos paràlegs HSF1 (HSF1a i HSF1b) trobats en anguiles probablement originats en l'esdeveniment de duplicació del genoma específic dels teleostis. L'anàlisi d'expressió va mostrar nivells significatius de tots els gens HSF en els testicles i altres teixits, com el cervell i les brànquies. Sota diferents temperatures (10 vs. 20 °C) i condicions de salinitat, només l'expressió de HSF1 va ser modulada, la qual cosa podria suggerir el seu paper en la detecció de canvis ambientals durant la migració d'aquesta espècie. El tractament hormonal amb hCGrec va resultar en una disminució de l'expressió dels HSF durant la maduració, amb canvis notables en HSF1a i HSF4, mentre que HSF5 va assolir el seu punt màxim després de 4 setmanes de tractament hormonal estàndard. Aquests resultats suggereixen possibles papers dels gens HSF en la gametogènesi i la resposta de les anguiles europees als canvis en l'entorn durant la seua migració reproductiva., [EN] Chapter 1 explores the effects of cold seawater pre-treatment on the sexual maturation of male European eels before applying a standard hormonal treatment. The study aimed to reduce the dependence of hormonal treatments or at least, to improve male reproductive performance. Male eels were exposed to 10 °C seawater for 2 or 4 weeks, and biometric parameters were assessed, blood plasma and testis were sampled for sex steroid and histological analysis. Cold pre-treatment stimulated early sexual maturation, increased steroid production, and enhanced spermatogonia differentiation. Eels treated for 4 weeks showed higher gonadosomatic index and androgen (T, 11-KT) and estradiol (E2) levels, while 2-week pre-treatment led to increased progestin (DHP) levels. Following pre-treatment, eels subjected to standard hormonal treatment initiated spermiation earlier and showed higher sperm density, motility, and kinetic parameters. This approach was economically effective, enhancing high-quality sperm production and suggesting increased hormone sensitivity due to cold seawater pre-treatment. Chapter 2 focused on the characterization, phylogenetic, and syntenic analyses of superoxide dismutases (SODs) in the European eel, important antioxidant enzymes with limited information in teleosts. SOD sequences were identified in various vertebrates, revealing one SOD1 and two SOD2/3 (a and b) in eels, probably resulting from the teleost-specific Whole Genome Duplication (WGD) event. SODs expression analysis showed tissue-specific and sex-dependent patterns once SOD1 was higher in females, SOD2a and SOD2b dominated in brain-pituitary-gonad tissues, and SOD3 paralogs had tissue-specific profiles. Using different maturation protocols revealed that SOD1 and SOD2a/b expression is upregulated with salinity at the onset of standard hormonal treatment. Moreover, cold seawater pre-treatment downregulated SOD1 but increased SOD3a. This study demonstrated SODs expression profiles are modulated with environmental changes and maturation treatments. Chapter 3 explored the heat shock factor (HSF) gene family, which regulates responses to environmental changes and participates in processes such as spermatogenesis. BLAST and phylogenetic analyses identified five known HSFs (HSF1-5) and a new HSF6 in vertebrates, with two HSF1 paralogs (HSF1a and HSF1b) found in eels likely originating from the teleost-specific WGD event. Expression analysis highlighted significant levels of all HSF genes in the testis and other tissues, such as brain and gills. Under different temperatures (10 vs. 20 °C) and salinity conditions, only HSF1 expression was modulated, suggesting its potential role in detecting environmental changes during migration. Hormonal treatment with hCGrec resulted in decreasing HSF expression during maturation, with notable changes in HSF1a and HSF4, while HSF5 peaked after 4 weeks. These findings suggest HSF potential roles in gametogenesis and environmental responsiveness during reproductive migration in European eel., Funded by the Spanish Ministry of Science, Innovation and Universities (MCIU; Project EELGONIA; RTI2018-096413-B-I00). Leonor Ferrao had a PhD contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From foes to friends: Viral infections expand the limits of host phenotypic plasticity

  • González, Rubén
  • Butkovic, Anamarija
  • ELENA FITO, SANTIAGO FCO
[EN] Phenotypic plasticity enables organisms to survive in the face of unpredictable environmental stress. Intimately related to the notion of phenotypic plasticity is the concept of the reaction norm that places phenotypic plasticity in the context of a genotype-specific response to environmental gradients. Whether reaction norms themselves evolve and which factors might affect their shape has been the object of intense debates among evolutionary biologists along the years. Since their discovery, viruses have been considered as pathogens. However, new viromic techniques and a shift in conceptual paradigms are showing that viruses are mostly non-pathogenic ubiquitous entities. Recent studies have shown how viral infections can even be beneficial for their hosts. This may happen especially in the context of stressed hosts, where the virus infection can induce beneficial changes in the host's physiological homeostasis, hence changing the shape of the reaction norm. Despite the fact that underlying physiological mechanisms and evolutionary dynamics are still not well understood, such beneficial interactions are being discovered in a growing number of plant-virus systems. Here, we aim to review these disperse studies and place them into the context of phenotypic plasticity and the evolution of reaction norms. This is an emerging field that is posing many questions that still need to be properly answered. The answers would clearly interest virologists, plant pathologists and evolutionary biologists and likely they will suggest possible future biotechnological applications, including the development of crops with higher survival rates and yield under adverse environmental situations., This work was funded by Spain's Agencia Estatal de Investigacion-FEDER grant BFU201565037-P and Generalitat Valenciana grant PROMETEU2019/012 to S.F.E. R.G. and A.B. were supported by Ministerio de Ciencia, Innovacion y Universidades-FEDER contract BES-2016-077078 and Generalitat Valenciana grant GRISOLIAP/2018/005, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative characterization of gum rosins for their use as sustainable additives in polymeric matrices

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldás-Carrasco, Miguel Fernando
  • Hernandez Fernandez, Joaquin Alejandro
[EN] There is a growing interest in the use of non-polluting compounds, which come from renewable sources, and which performance in their scope is equivalent to their synthetic similes. In this work, five types of rosins from different sources were studied, verifying the existence of differences that can be inferred in their subsequent use and application as material additives. For the study, rosins were analyzed using gas-mass chromatographic techniques, infrared spectrophotometry (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and color characterization. The results showed that the samples are composed of either abietic acid or by its structural isomers in contents higher than 80%. FTIR shows that the main difference in the gum rosins is related to the proclivity to absorb environmental moisture and that this technique is not enough to differentiate them. Moreover, the DSC reveals that the gum rosins present enthalpy relaxation effects due to their manufacturing process. The TGA showed that gum rosins are thermally stable until 200 degrees C, therefore they can be successfully blended with thermoplastic polymers. Finally, the color characterization shows little differences between the samples, being CA the gum rosin with the greatest total color differences., CRUE-Universitat Politecnica de Valencia; Spanish Ministry of Science and Innovation, Grant/Award Number: PID2020-116496RB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review of instabilities produced by direct contact condensation of steam injected in water pools and tanks

  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • Córdova, Y.
[EN] The purpose of this paper is to review and analyze several types of instabilities as condensation oscillations (CO), stable condensation oscillations (SC), and bubbling condensation oscillation (BCO). These instabilities are pro-duced during the discharge of steam into subcooled pools through vents or spargers. The mechanism of direct contact condensation (DCC) plays an essential role in these instabilities justifying that we review first the fundamental basis of DCC and the jet penetration length for the discharges of pure steam in subcooled water. Then, special attention is devoted to developing correlations for the nondimensional penetration length for ellipsoidal or hemi-ellipsoidal prolate steam jets observed in many experiments, to the heat transfer coefficients of DCC and to the best way to correlate the penetration length. Next, it is analyzed the stability of the steam jets with hemi-ellipsoidal shape in the transition and condensation oscillation regimes and it is computed the sub -cooling temperature threshold for low and high oscillation frequencies. These results for the subcooling tem-perature thresholds for low and high frequencies with a hemi-ellipsoidal steam jet are then compared with the results for spherical and cylindrical jets and with the experimental data in an interval of mass fluxes ranging from 0 to 180 kg/m2s. In addition, a sensitivity analysis is performed to know the dependence of the low and high frequency liquid temperature thresholds on the vent diameter and the polytropic coefficient. The third part of the paper is devoted to the study of the instabilities produced in the stable condensation (SC) and the interfacial condensation oscillations (IOC) regions of the map. First Hong et al. model (2012) is extended to include the entrainment in the liquid dominated region (LDR), obtaining new expressions for the oscillations frequency that depend on the entrainment coefficient and the expansion of the jet in the liquid dominated region. Finally, the mechanical energy balance is extended to include the momentum transferred to the jet by the condensate steam, obtaining a new equation for the frequency that is compared with Hong et al.'s data for a set of pool temperatures ranging from 35 degrees C to 90 degrees C and discharge mass steam fluxes ranging from 200 to 900 kg/m2s., One of the authors of this project received a Grisolía scholarship to perform his PhD. The authors of this paper are indebted to Generalitat Valenciana (Spain) by its support under the Grisolía scholarship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Contribution to the study of Oxy-Fuel Combustion in Reciprocating Engines for CO2 Capture

  • Raggi, Rodrigo
[ES] Los motores de combustión interna (MCI) se utilizan ampliamente en las principales actividades económicas de los países, no solo en diversos sectores industriales, sino también en la mayoría de los sistemas de transporte. En los últimos años se han desarrollado diversas alternativas para sustituir esta máquina de movimiento alternativo, pero se estima que su demanda seguirá aumentando en los próximos años. Es bien sabido que se libra una batalla política a nivel mundial para minimizar no solo los gases de efecto invernadero, sino también otras emisiones que afectan directamente a la salud humana, como NOx, CO, HC y PMx. Dado que las restricciones sobre estos gases se endurecerán con el paso de los años, los MCI deberán adaptarse a las normativas que se vayan implementando. Por ello, esta tesis doctoral tiene como objetivo estudiar los efectos de la oxicombustión (OFC) sobre el rendimiento (consumo y emisiones) al aplicarse en MCI. Para ello, se adaptó un banco de pruebas experimental para operar un motor de encendido por chispa monocilíndrico en condiciones de OFC, con el objetivo de evaluar con diferentes criterios los límites de este modo de combustión no convencional y las estrategias más adecuadas para maximizar el rendimiento y reducir las emisiones. El análisis experimental se complementa con simulaciones realizadas con herramientas teóricas calibradas para predecir con precisión el rendimiento de un MCI-OFC bajo diferentes estrategias de control y modificaciones geométricas. Los resultados de esta tesis doctoral sientan las bases para futuros estudios, al considerar los diversos fenómenos que surgen al operar un MCI-OFC en condiciones reales de operación., [CA] Els motors de combustió interna (MCI) s'utilitzen àmpliament en les principals activitats econòmiques dels països, no sols en diversos sectors industrials, sinó també en la majoria dels sistemes de transport. En els últims anys s'han desenrotllat diverses alternatives per a substituir esta màquina de moviment alternatiu, però s'estima que la seua demanda continuarà augmentant en els pròxims anys. És ben sabut que es lliura una batalla política a nivell mundial per a minimitzar no sols els gasos d'efecte d'hivernacle, sinó també altres emissions que afecten directament la salut humana, com NOx, CO, HC i PMx. Atés que les restriccions sobre estos gasos s'enduriran amb el pas dels anys, els MCI hauran d'adaptar-se a la normativa vigent. Per això, esta tesi doctoral té com a objectiu estudiar els efectes de la oxicombustión (OFC) sobre el rendiment (consum i emissions) en aplicar-se en MCI. Per a això, es va adaptar un banc de proves experimental per a operar un motor d'encesa per espurna monocilíndric en condicions de OFC, amb l'objectiu d'avaluar amb diferents criteris els límits d'esta manera de combustió no convencional i les estratègies més adequades per a maximitzar el rendiment i reduir les emissions. L'anàlisi experimental es complementa amb simulacions realitzades amb ferramentes teòriques calibrades per a predir amb precisió el rendiment d'un MCI-OFC baix diferents estratègies de control i modificacions geomètriques. Els resultats d'esta tesi doctoral establixen les bases per a futurs estudis, en considerar els diversos fenòmens que sorgixen en operar un MCI-OFC en condicions reals d'operació., [EN] Internal combustion engines (ICE) are widely used in the main economic activities of countries, not only in various industrial sectors but also in most of the transport systems. Various alternatives have been developed in recent years to replace this reciprocating movement machine, but it is estimated that demand for it will continue to increase in the coming years. It is well known that a political battle is being waged worldwide to minimize not only greenhouse gases but also other emissions that directly affect human health, such as NOx, CO, HC, and PMx. Given that the restrictions on these gases will become stronger over the years, ICEs will have to adapt to the regulations being implemented. For this reason, this thesis aims to study the effects that oxy-fuel combustion (OFC) has on performance (consumption and emissions) when applied in ICEs. To carry out this task, an experimental test bench was adapted to operate a single-cylinder spark-ignition engine under OFC conditions. Thus, this work evaluates with different criteria the limits of this non-conventional combustion mode and which strategies are most suitable for maximizing performance and reducing emissions. The experimental analysis is complemented by simulations performed by theoretical tools that were calibrated to accurately predict the performance of an OFC-ICE under different control strategies and geometry modifications. The results of this doctoral thesis provide a foundation for future studies by accounting for the various phenomena that arise when operating an ICE under real-world conditions using the OFC principle., I want to thank the Generalitat Valenciana for founding my predoctoral contract (GRISOLIAP/2021/108), which is included within the framework of Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement of the atmospheric Muon neutrino [nu mu] flux with six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Bardacova, Z.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] A measurement of the atmospheric nu(mu) + (nu) over bar (mu) flux with energies between 1 and 100 GeV is presented. The measurement has been performed using data taken with the first six detection units of the KM3NeT/ORCA detector, referred to as ORCA6. The data were collected between January 2020 and November 2021 and correspond to 510 days of livetime, with a total exposure of 433 kton.years. Using machine learning classification, 3894 neutrino candidate events have been selected with an atmospheric muon contamination of less than 1%. The atmospheric nu(mu) + (nu) over bar (mu) energy spectrum is derived using an unfolding procedure and the impact of systematic uncertainties is estimated. The atmospheric nu(mu) + (nu) over bar (mu) flux measured using the ORCA6 configuration is in agreement with the values measured by other experiments., The authors acknowledge the financial support of: KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GAR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, The Provence-Alpes-Cote d'Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Cote d'Azur region, the Bouches-du-Rhone Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, The CNRS Institut National de Physique Nucleaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). This work was supported by the European Research Council, ERC Starting grant MessMapp, under contract no. 949555. The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Unoversita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre", carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development fund; The program: 'Excellence initiative-research university' for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/2/ST6/00004 and ARTIQ/ 0004/2021; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6. 2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA - Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pine Resin Derivatives as Sustainable Additives to Improve the Mechanical and Thermal Properties of Injected Moulded Thermoplastic Starch

  • Aldas-Carrasco, Miguel Fernando
  • Arrieta, Marina Patricia
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Fully bio-based materials based on thermoplastic starch (TPS) were developed starting from corn starch plasticized with glycerol. The obtained TPS was further blended with five pine resin derivatives: gum rosin (GR), disproportionated gum rosin (dehydroabietic acid, RD), maleic anhydride modified gum rosin (CM), pentaerythritol ester of gum rosin (LF), and glycerol ester of gum rosin (UG). The TPS¿resin blend formulations were processed by melt extrusion and further by injection moulding to simulate the industrial conditions. The obtained materials were characterized in terms of mechanical, thermal and structural properties. The results showed that all gum rosin-based additives were able to improve the thermal stability of TPS, increasing the degradation onset temperature. The carbonyl groups of gum rosin derivatives were able to interact with the hydroxyl groups of starch and glycerol by means of hydrogen bond interactions producing a significant increase of the glass transition temperature with a consequent stiffening effect, which in turn improve the overall mechanical performance of the TPS-resin injected moulded blends. The developed TPS¿resin blends are of interest for rigid packaging applications., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO), project: PROMADEPCOL (MAT2017-84909-C2-2-R) as well as by Santander-UCM (PR87/19-22628) project. M.A. thanks Secretaria Nacional de Educación Superior, Ciencia, Tecnología e Innovación (SENESCYT-Ecuador) and Escuela Politécnica Nacional. C.P. thanks Santiago Grisolía fellowship (GRISOLIAP/2019/113) from Generalitat Valenciana and M.P.A. thanks MINECO for her postdoctoral contract: Juan de la Cierva-Incorporación (FJCI-2017-33536).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Intracrystalline Silanol Defects on the Diffusivity of Benzene in Silicalite Zeolite

  • Misturini, Alechania
  • Kariminasab, Sara
  • Altundal, Ömer Faruk
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Intracrystalline zeolite silanol defect groups (& EQUIV;SiOH) were modelled in silicalite (silica ZSM-5, MFI) using experimental data. We make a molecular dynamics study on the self-diffusivity of benzene in silicalite with defects. The simulations at three different loadings (1, 3 and 5 benzene per unit cell) and temperatures (298, 348 and 398 K) allow to calculate self-diffusivity, adsorption energy and the activation energy. The results show that benzene self-diffusivity in silicalite is increased by the presence of silanol defects. Previous experimental results support this claim., This work was supported by Generalitat Valenciana predoctoral fellowship GRISOLIAP/2019/084. We also thank Generalitat Valenciana for funding through PROMETEO/2021/077 project and CESGA for the use of computational facilities. Financial support by the Ministry of Science and Innovation (MICINN) of Spain through project CEX2021-001230-S (10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ANTARES Search for Point Sources of Neutrinos Using Astrophysical Catalogs: A Likelihood Analysis

  • Albert, A.
  • Andre, M.
  • Anghinolfi, M.
  • Anton, G.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bertin, V.
  • Biagi, S.
  • M. Bissinger
  • Boumaaza, J.
  • Bouta, M.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
[EN] A search for astrophysical pointlike neutrino sources using the data collected by the ANTARES detector between 2007 January 29 and 2017 December 31 is presented. A likelihood method is used to assess the signicance of an excess of muon neutrinos inducing track-like events in correlation with the location of a list of possible sources. Different sets of objects are tested in the analysis: (a) a subsample of the Fermi 3LAC catalog of blazars, (b) a jet- obscured population of active galactic nuclei, (c) a sample of hard X-ray selected radio galaxies, (d) a star-forming galaxy catalog, and (e) a public sample of 56 very-high-energy track events from the IceCube experiment. None of the tested sources shows a signi¿cant association with the sample of neutrinos detected by ANTARES. The smallest p-value is obtained for the catalog of radio galaxies with an equal-weights hypothesis, with a pre-trial p- value equivalent to a 2.8sigma excess, which is equivalent to 1.6sigma post-trial. In addition, the results of a dedicated analysis for the blazar MG3 J225517+2409 are also reported: this source is found to be the most signi¿cant within the Fermi 3LAC sample, with five ANTARES events located less than one degree from the source. This blazar showed evidence of ¿aring activity in Fermi data, in spacetime coincidence with a high-energy track detected by IceCube. An a posteriori signicance of 2.6sigma for the combination of ANTARES and IceCube data is reported., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR and A-FQM-053UGR18), Generalitat Valenciana: Grisolia (ref. GRISOLIA/2018/119) and GenT (ref. CIDEGENT/2018/034), Spain; Ministry of Higher Education, Scientific Research and Professional Training, Morocco. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Introgressed eggplant lines with the wild Solanum incanum evaluated under drought stress conditions

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Mircea, Diana Maria|||0000-0002-9747-7272
  • Ruiz-González, Mario X.|||0000-0003-3654-773X
  • Vicente, Oscar|||0000-0001-5076-3784
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
[EN] As access to irrigation water becomes increasingly limited, introgression of relevant genomic regions from drought-tolerant wild genotypes is a promising breeding strategy for crop plants. In this study, nine eggplant (Solanum melongena) introgression lines (ILs) covering altogether 71.6% of the genome of the donor wild relative parent S. incanum were evaluated for drought tolerance under water stress conditions. Plants at the five true leaves stage were irrigated at either 100% (control) or 30% (water stress) field capacity for 14 days, and growth and biochemical traits were measured. Reduced irrigation resulted in decreased growth and increased stress markers such as proline and malondialdehyde. Most ILs had lower growth and biomass production than the cultivated parent under both conditions. However, the wild alleles for two genomic regions related to stem and root dry weight conferred improved tolerance to water stress. In addition, several S. incanum alleles had a positive effect on important traits that may improve yield under drought conditions, such as leaf water content water use efficiency, and chlorophyll content. Fine-mapping the genomic regions for tolerance and reducing linkage drag with regions affecting growth will be crucial for significantly improving eggplant drought tolerance through introgression breeding., This work was supported by the grants CIPROM/2021/020 from Conselleria d'Educacio, Universitats i Ocupacio (Generalitat Valenciana, Spain) and PID2021-128148OB-I00 funded by MCIN/AEI/10.13039/501100011033/and by "ERDF A way of making Europ", as well as by the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing Crop Wild Relatives", which is supported by the Government of Norway. This latter project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http:// www.cwrdiversity.org/. Martin Flores-Saavedra is grateful to Conselleria d'Educacio, Universitats i Ocupacio de la Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia programme (GRISOLIAP/2021/151) . Pietro Gramazio is grateful to Spanish Ministerio de Ciencia e Innovacion for a post-doctoral grant (RYC2021-031999-I) funded by MCIN/AEI/10.13039/501100011033 and the European Union through NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fully Vacuum Deposited Perovskite Solar Cells in Substrate Configuration

  • Abhyuday, Paliwal
  • Zanoni, Kassio P. S.
  • Roldán-Carmona, Cristina
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] This work demonstrates the fabrication of perovskite solar cells in substrate configuration by vacuum-deposition methods. The resultant solar cells demonstrate high efficiency of 19% and thermal stability of more than 550 h. The use of mature and industry-friendly vacuum-deposition methods as well as the demonstrated approach of fabricating the perovskite solar cell may help in the upscaling and future commercialization of perovskite solar cells, The research leading to these results has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for project PROMETEU/2020/077 and A.P. for grant GRISOLIAP/2020/134. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI) project PID2021-126444OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; K.P.S.Z. for grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; and C.R.-C. for grant RYC2019-027187-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental investigation of ambient temperature effects on performance and refrigerant charge in a variable-speed, direct-suction R290 scroll compressor for heat pump applications

  • Gómez-Parada, Nicolás
  • Barceló Ruescas, Francisco|||0000-0002-0577-2662
  • Gonzálvez-Maciá, José|||0000-0001-9422-7756
[EN] Scroll compressors with direct suction are commonly used in commercial heat pumps; however, the evaluation of refrigerant inventory and the factors governing refrigerant retention within the compressor remain limited, particularly when operating with propane (R290). This aspect is particularly important in low-charge system designs due to the flammability of hydrocarbon refrigerants. This work experimentally characterizes a variable-speed direct-suction scroll compressor over a wide range of evaporation and condensation conditions, rotational speeds, and ambient temperatures with and without a thermal-acoustic insulation jacket. Results show that ambient temperature has a negligible influence on mass flow rate and power consumption at fixed suction and discharge pressures, but significantly affects discharge and oil-sump temperatures, especially at low speed and high-pressure ratio. A compact compressor model is calibrated for mass flow rate and power, and extended with a lumped heat-loss correction term to capture variations in discharge temperature under ambient exposure. The oil-sump temperature is then correlated with the modeled discharge temperature, yielding low errors (RMSE of 1.8 °C for insulated tests and 1.3 °C for non-insulated tests). Combining the oil-temperature correlation with published R290/PAG solubility curves enables estimation of the refrigerant mass dissolved in the oil, revealing differences up to 67.5 g at the same operating point. Finally, simulations for an air-to-water heat pump show that thermal insulation can shift operating limits in domestic hot-water mode by up to 4 K under a discharge-temperature constraint. The dataset and modeling approach support compressor thermal management and charge optimization for low-charge heat pumps using flammable refrigerants., We gratefully acknowledge the financial support provided by the project "Investigacion en la proxima generacion de bombas de calor aerotermicas para edificios integradas en los sistemas de calefaccion/ refrigeracion y agua caliente sanitaria", funded by Agencia Estatal de Investigacion de Espana , with code number: PID2023-148964OB-I00. The work of Nicolas Gomez Parada in this project has been partially supported by Generalitat Valenciana, under the program Santiago Grisolía with reference GRISOLIAP/2021/084. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An Adaptive LoRa-Based Edge Architecture for Data Sensing and Collection in Natural Parks

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Perles, Angel|||0000-0002-5782-4284
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This article introduces the design of a flexible IoT/Edge architecture to overcome the challenges of deploying advanced sensors in remote settings such as natural parks. These environments demand reliable communication and considerable computational resources to manage the extensive real-time data from IoT devices like sensors and cameras. Our approach combines two LoRa-based protocols to efficiently handle large data blocks and ensure long-range communication, conserving energy and maintaining data integrity crucial for integrating sophisticated sensors with conventional IoT devices. The architecture offers edge computing within a containerbased gateway, simplifying on-site data processing and minimizing data traffic complexities. The MQTT protocol supports interoperability among distributed services, enhancing adaptability and efficiency in processing data locally or via cloud services like digital twins. We demonstrate this system¿s effectiveness through two case studies in natural parks: visitor counting using Time of Flight technology and water level measurement with GNSS data. These cases highlight the system¿s ability to handle frequent small and less frequent large data transmissions efficiently, This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387; Research project CIPROM/2023/29, funded by Direccio General de Ciencia ` i Investigacio Generalitat Valenciana - SPAIN; EU s Horizon ¿ 2020 research and innovation program No 101017861, by project Ramon y Cajal Grant RYC2018-025580-I, funded by ¿ MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021- 130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Event reconstruction for KM3NeT/ORCA using convolutional neural networks

  • Aiello, S.
  • Albert, A.
  • Garre, S. Alves
  • Aly, Z.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Anton, G.
  • Aublin, J.
  • Bagatelas, C.
  • Barbarino, G.
  • Baret, B.
  • Diego-Tortosa, D.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches., The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education, Scientific Research and Professional Training, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR), Generalitat Valenciana: Grisolia (ref. GRISOLIA/2018/119) and GenT (ref. CIDEGENT/2018/034) programs, La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 713673), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of a Set of Eggplant (Solanum melongena) Lines With Introgressions From Its Wild Relative S. incanum Under Open Field and Screenhouse Conditions and Detection of QTLs

  • Mangino, Giulio
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
[EN] Introgression lines (ILs) of eggplant (Solanum melongena) represent a resource of high value for breeding and the genetic analysis of important traits. We have conducted a phenotypic evaluation in two environments (open field and screenhouse) of 16 ILs from the first set of eggplant ILs developed so far. Each of the ILs carries a single marker-defined chromosomal segment from the wild eggplant relative S. incanum (accession MM577) in the genetic background of S. melongena (accession AN-S-26). Seventeen agronomic traits were scored to test the performance of ILs compared to the recurrent parent and of identifying QTLs for the investigated traits. Significant morphological differences were found between parents, and the hybrid was heterotic for vigour-related traits. Despite the presence of large introgressed fragments from a wild exotic parent, individual ILs did not display differences with respect to the recipient parent for most traits, although significant genotype x environment interaction (G x E) was detected for most traits. Heritability values for the agronomic traits were generally low to moderate. A total of ten stable QTLs scattered across seven chromosomes was detected. For five QTLs, the S. incanum introgression was associated with higher mean values for plant- and flower-related traits, including vigour prickliness and stigma length. For one flower- and four fruit-related-trait QTLs, including flower peduncle and fruit pedicel lengths and fruit weight, the S. incanum introgression was associated with lower mean values for fruit-related traits. Evidence of synteny to other previously reported in eggplant populations was found for three of the fruit-related QTLs. The other seven stable QTLs are new, demonstrating that eggplant ILs are of great interest for eggplant breeding under different environments., This work was undertaken as part of the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting, and Preparing Crop Wild Relatives", which is supported by the Government of Norway. The project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http://www.cwrdiversity.org/.Funding was also received from Spanish Ministerio de Economia, Industria y Competitividad and Fondo Europeo de Desarrollo Regional (grant AGL2015-64755-R from MINECO/FEDER); from Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE); from European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops); and from Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigacion; PAID-06-18). Giulio Mangino is grateful to Generalitat Valenciana for a predoctoral grant within the Santiago Grisolia programme (GRISOLIAP/2016/012). Pietro Gramazio is grateful to Japan Society for the Promotion of Science for a postdoctoral grant (P19105, FY2019 JSPS Postdoctoral Fellowship for Research in Japan (Standard)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Growth and antioxidant responses to water stress in eggplant MAGIC population parents, F1 hybrids and a subset of recombinant inbred lines

  • Flores-Saavedra, Martín Ignacio|||0000-0002-8470-2362
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vicente, Oscar|||0000-0001-5076-3784
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[EN] Background The generation of new eggplant (Solanum melongena L.) cultivars with drought tolerance is a main challenge in the current context of climate change. In this study, the eight parents (seven of S. melongena and one of the wild relative S. incanum L.) of the first eggplant MAGIC (Multiparent Advanced Generation Intercrossing) population, together with four F1 hybrids amongst them, five S5 MAGIC recombinant inbred lines selected for their genetic diversity, and one commercial hybrid were evaluated in young plant stage under water stress conditions (30% field capacity; FC) and control conditions (100% FC). After a 21-day treatment period, growth and biomass traits, photosynthetic pigments, oxidative stress markers, antioxidant compounds, and proline content were evaluated. Results Significant effects (p<0.05) were observed for genotype, water treatments and their interaction in most of the traits analyzed. The eight MAGIC population parental genotypes displayed a wide variation in their responses to water stress, with some of them exhibiting enhanced root development and reduced foliar biomass. The commercial hybrid had greater aerial growth compared to root growth. The four F1 hybrids among MAGIC parents differed in their performance, with some having significant positive or negative heterosis in several traits. The subset of five MAGIC lines displayed a wide diversity in their response to water stress. Conclusion The results show that a large diversity for tolerance to drought is available among the eggplant MAGIC materials, which can contribute to developing drought-tolerant eggplant cultivars., This work was funded by MICIU/AEI/10.13039/501100011033 (PCI2019-103375) and cofunded by the European Union. Funding was also received from grant CIPROM/2021/020 funded by Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana, and from grant PDC2022-133513-I00 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. MF-S is grateful to Conselleria d'Educacio, Universitats i Ocupacio of the Generalitat Valenciana for a pre-doctoral grant within the Santiago Grisolia program (GRISOLIAP/2021/151). PG has received a postdoctoral grant (RYC2021-031999-I) funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. Funding for open access: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxy-fuel combustion feasibility of compression ignition engines using oxygen separation membranes for enabling carbon dioxide capture

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Farias, V. H.
[EN] Oxy-fuel combustion concept is studied in a compression ignition engine (CIE) using Mixed Ionic-electronic Conducting Membranes (MIECs) to separate oxygen (O2) from air in order to achieve a clean combustion eliminating completely nitrogen oxides (NOx) emissions and enabling upcoming carbon dioxide (CO2) capture. Exhaust gas recirculation (EGR), composed mainly by CO2 and water, is used to control the in-cylinder temperature and exhaust gas wasted energy is recovered for producing the O2 required by the engine by heating up the MIEC. For this purpose, different engine configurations are analyzed in order to find out an optimum one in terms of energy efficiency and engine performance. Basically, two different EGR control systems (CS) are studied: one with a variable geometry turbine (VGT) on EGR line and other with a VGT on cylinder exhaust line. A simulation software, so-called Virtual Engine Model (VEMOD), is employed in this study to build and analyze the proposed oxy-fuel engine model which is calibrated with experimental data. The engine and its auxiliary components (turbochargers and heat exchangers) are assessed under oxy-fuel combustion conditions for the engine full load operation points from 1250 rpm to 3500 rpm. If compared to a conventional CIE, at high engine speeds the proposed oxy-fuel combustion engine provides similar brake power and indicated efficiency, whereas at low engine speeds, despite of it yields higher brake-specific fuel consumption (BSFC on average, more than 10%), a brake power enhancement (on average, more than 30%) is observed. In any way the breakthrough result is the feasible end of correlation between BSFC and CO2 emissions due to CO2 capture., This work has been founded by Generalitat Valenciana (GRISOLIAP/ 2020/078) and Agencia Valenciana de la Innovacion (INNVA1/2021/ 38).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Soot reduction for cleaner Compression Ignition Engines through innovative bowl templates

  • Pastor, José V.|||0000-0003-4113-4681
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Micó, Carlos|||0000-0001-5787-6212
  • De Vargas Lewiski, Felipe
[EN] Considering the need of pollutant emissions reduction and the high cost of the after-treatment systems, in-cylinder solutions for pollutant reduction are becoming more and more relevant. Among different proposals, new piston geometries are considered an attractive solution for reducing both soot and nitrogen oxides emissions in compression ignition engines. For this reason, this paper evaluates the soot formation and combustion characteristics of a novel piston geometry proposal, called stepped lip-wave, for light-duty engines. It is compared with other two well-known bowl geometries: re-entrant and stepped lip. The study was performed in an optical single-cylinder direct injection compression ignition engine. Two optical techniques (2 color pyrometry and OH* chemiluminescence) were applied for analyzing soot formation in each piston geometry. Test were performed at different engine loads, fuel injection characteristics and exhaust gas recirculation configuration. The re-entrant piston presents higher soot formation and a slower late oxidation process in comparison with the other two geometries. Stepped lip and stepped lip-wave present similar soot formation levels. However, stepped lip-wave showed a more efficient and faster soot oxidation process during the final combustion stages. Results confirm the potential of the stepped lip-wave concept to reduce soot emissions and achieve a cleaner energy production system., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was partially funded by Generalitat Valenciana through the Programa Santiago Grisolia (GRISOLIAP/2018/142) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Photodegradation of Synthetic Dyes Mediated by Ag3PO4-Based Semiconductors under Visible Light Irradiation

  • Pavanello, Alice
  • Johnston, Peter F.
  • Miranda Alonso, Miguel Ángel
  • Blasco-Brusola, Alejandro
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Four silver phosphate-based materials were successfully synthesized, characterized, and evaluated, together with TiO2, in the photodegradation of synthetic dyes (tartrazine, Orange II, rhodamine, and Brilliant Blue FCF) under two irradiation sources centered at 420 and 450 nm. Scanning Electron Microscopy (SEM) images showed different topologies of the synthesized materials, whereas diffuse reflectance spectra demonstrated that they display absorption up to 500 nm. Degradation experiments were performed in parallel with the silver materials and TiO2. Upon irradiation centered at 420 nm, the abatement of the dyes was slightly more efficient in the case of TiO2-except for Orange II. Nevertheless, upon irradiation centered at 450 nm, TiO(2)demonstrated complete inefficiency and silver phosphates accomplished the complete abatement of the dyes-except for Brilliant Blue FCF. A careful analysis of the achieved degradation of dyes revealed that the main reaction mechanism involves electron transfer to the photogenerated holes in the valence band of silver photocatalysts, together with the direct excitation of dyes and the subsequent formation of reactive species. The performance of TiO(2)was only comparable at the shorter wavelength when hydroxyl radicals could be formed; however, it could not compete under irradiation at 450 nm since the formed superoxide anion is not as reactive as hydroxyl radicals., This research was funded by Spanish Government (Grant SEV-2016-0683), Generalitat Valenciana (Prometeo Program) and H2020/Marie Sklodowska-Curie Actions under the AQUAlity project (Reference: 765860). The authors would like to acknowledge H2020/Marie Sk¿odowska-Curie Actions under the AQUAlity project (Reference: 765860). Consellería d¿Educació, Investigació, Cultura i Esport (PROMETEO/2017/075 and GRISOLÍAP/2017/005) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the cellulose purification process on the properties of aerogels obtained from rice straw

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] Cellulose aerogels were obtained from purified rice straw cellulose fibres (CF) by applying different extraction methods: the conventional alkaline treatment (ALK) and alternative aqueous extraction based on the ultrasound combined with reflux heating (USHT) and subcritical water extraction (SWE) (160 and 180 degrees C). The composition and properties of the CFs were significantly affected by the purification process. The USHT treatment was as efficient as the ALK at eliminating the silica content, but the fibres maintained a notable ratio of hemicellulose (similar to 16 %). The SWE treatments were not so effective at removing silica (15 %) but greatly promoted the selective extraction of hemicellulose, especially at 180 degrees C (3 %). The CF compositional differences affected their hydrogel formation capacity and the properties of aerogels. A higher hemicellulose content in the CF led to better-structured hydrogels with better water-holding capacity, while the aerogels exhibited a more cohesive structure with thicker walls, higher porosity (99 %) and water vapour sorption capacity, but lower liquid water retention capacity (0.2 g/g). The residual silica content also interfered with the hydrogel and aerogel formation, giving rise to less structured hydrogels and more fibrous aerogels, with lower porosity (97-98 %)., The authors thank the Agencia Estatal de Investigación (Spain) for the financial support through project PID2019-105207RB-I00/AEI/10.13039/501100011033 and Generalitat Valenciana for funding the project CIPROM/2021/071 and grant GrisoliaP/2019/115.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chromogenic Chemodosimeter Based on Capped Silica Particles to Detect Spermine and Spermidine

  • Barros, Mariana
  • López-Carrasco, Alejandro
  • Amorós, Pedro
  • Gil Grau, Salvador
  • Gaviña, Pablo
  • PARRA ALVAREZ, MARGARITA
  • El Haskouri, Jamal
  • TERENCIO SILVESTRE, Mº CARMEN
  • Costero, Ana M.
[EN] A new hybrid organic-inorganic material for sensing spermine (Spm) and spermidine (Spd) has been prepared and characterized. The material is based on MCM-41 particles functionalized with an N-hydroxysuccinimide derivative and loaded with Rhodamine 6G. The cargo is kept inside the porous material due to the formation of a double layer of organic matter. The inner layer is covalently bound to the silica particles, while the external layer is formed through hydrogen and hydrophobic interactions. The limits of detection determined by fluorimetric titration are 27 mu M and 45 mu M for Spm and Spd, respectively. The sensor remains silent in the presence of other biologically important amines and is able to detect Spm and Spd in both aqueous solution and cells., This research was funded by Spanish Government (RTI2018-100910-B-C42 and RTI2018100910-B-C44 (MCUI/AEI/FEDER, UE) and grant GRISOLIAP/2019/023.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constraining gamma-ray burst parameters with the first ultra-high energy neutrino event KM3-230213A

  • Adriani, O.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshalloudi, S.
  • Alshamsi, M.
  • Garre, S. Alves
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] Context. The detection of the highest energy neutrino observed to date by KM3NeT, with an estimated energy of 220 PeV, opens up new possibilities for the study and identification of the astrophysical sources responsible for a di ffuse flux of such ultra-high-energy neutrinos, among which gamma-ray bursts are longstanding candidates.; Aims. Based on the event KM3-230213A, we derived constraints on the baryon loading and density of the surrounding environment in models of blast waves in long-duration gamma-ray bursts.; Methods. We computed the di ffuse flux from gamma-ray burst blast waves, either expanding in a constant density interstellar medium or developing in a radially decreasing density of a wind-like environment surrounding the gamma-ray burst progenitor star, by taking into account the expected neutrino spectra and luminosity function. We used a Poisson likelihood method to constrain the blast wave model parameters by calculating the expected number of neutrino events within the 90% confidence level energy range of KM3-230213A and by using the joint exposure of KM3NeT/ARCA, IceCube, and Pierre Auger.; Results. We constrain the baryon loading to be f(b) <= 51 at 90% confidence, with the best-fit and 68% confidence interval being f(b) = 26.9(-17.2)(+11.4) for a constant interstellar medium particle density of n(0) = 1 cm(-3). In the wind-like environment case, the baryon loading is fb similar to 1095 at 90% confidence, with the corresponding 68% confidence interval being f(b) is an element of [8, 231], which is proportional to the sixth power of a variable density parameter of A(*) = 0.1., We thank the anonymous reviewers for their insightful comments and constructive suggestions, which greatly improved this manuscript. The authors acknowledge the financial support of: KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, The Provence-Alpes-Cote d'Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Cote d'Azur region, the Bouches-du-Rhone Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, The CNRS Institut National de Physique Nucleaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto NRRP), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - Next-GenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre", carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; The program: "Excellence initiative-research university" for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/2/ST6/00004 and ARTIQ/0004/2021; Ministry of Education and Scientific Research, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6. 2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2020/049, CIDEGENT/2021/23, CIDEIG/2023/20, ESGENT2024/24, CIPROM/2023/51, GRISOLIAP/2021/192 and INNVA1/2024/110 (IVACE +i), Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA - Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microencapsulation of Copper(II) Sulfate in Ionically Cross-Linked Chitosan by Spray Drying for the Development of Irreversible Moisture Indicators in Paper Packaging

  • Rojas-Lema, Sandra
  • Terol, Jorge
  • Fages, Eduardo
  • Prieto, Cristina
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking with sodium tripolyphosphate (STPP) followed by spray drying. The microencapsulation process was optimal using an inlet temperature of 180 ºC, a liquid flow-rate of 290 mL/h, an aspiration rate of 90%, and an atomizing gas flow-rate of 667 nL/h. Chitosan particles containing copper(II) sulfate of approximately 4 microns with a shrunken-type morphology were effciently attained and, thereafter, fixated on a paper substrate either via cross-linking with STPP or using a chitosan hydrogel. The latter method led to the most promising system since it was performed at milder conditions and the original paper quality was preserved. The developed cellulose substrates were reduced and then exposed to different humidity conditions and characterized using colorimetric measurements in order to ascertain their potential as irreversible indicators for moisture detection. The results showed that the papers coated with the copper(II) sulfate-containing chitosan microparticles were successfully able to detect ambient moisture shown by the color changes of the coatings from dark brown to blue, which can be easily seen with the naked eye. Furthermore, the chitosan microparticles yielded no cytotoxicity in an in vitro cell culture experiment. Therefore, the cellulose substrates herein developed hold great promise in paper packaging as on-package colorimetric indicators for monitoring moisture in real time., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. S.R.-L. is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). S.T.-G. acknowledges MICI for his Juan de la Cierva Incorporación contract (IJCI-2016-29675). L.Q.-C. thanks GVA for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Characterisation of PDRG1 in Arabidopsis thaliana and the role of R2T/PFDL complex in cell differentiation

  • Hernández Villa, Laura Carolina
[ES] P53 and DNA damage-regulated gene 1 (PDRG1) forma parte del complejo similar a prefoldina (PFDLc) tanto en plantas como en animales. Sin embargo, aún no está claro si PDRG1 funciona principalmente como una subunidad de PFDLc o como una entidad independiente. En este estudio, demostramos que la pérdida de actividad de PDRG1 en Arabidopsis thaliana conduce a letalidad embrionaria, un fenotipo que también se ha observado en mutaciones de otras proteínas similares a prefoldina, como UXT y AtURI. Nuestros resultados indican que las subunidades de PFDLc son los principales interactores de PDRG1 in vivo, y que los interactomas de PDRG1, UXT y AtURI muestran una superposición considerable, particularmente con subunidades de la RNA polimerasa nuclear y de los complejos de espliceosoma. Estos hallazgos confirman que PDRG1 es esencial para el desarrollo de Arabidopsis y que su función principal es como subunidad del PFDLc. Por otro lado, el complejo R2T/PFDL desempeña un papel en la regulación de la formación de callo y la diferenciación de brotes en Arabidopsis. Los mutantes tpr5, aturi y pfd2,6 presentan defectos en el mantenimiento del crecimiento de células indiferenciadas, mientras que los callos mutantes muestran una mayor capacidad para formar brotes. El análisis transcriptómico de estos tres mutantes en medios CIM y SIM revela cambios significativos en la expresión génica, lo que sugiere que R2T/PFDL actúa aguas arriba de las principales vías moleculares que promueven la formación de callo y evitan la diferenciación de brotes. Nuestros resultados indican que estos defectos en los mutantes están mediados por una expresión alterada de genes relacionados con la pared celular. En general, R2T/PFDL emerge como un potencial regulador de las vías que controlan la formación y diferenciación del callo en Arabidopsis., [CA] P53 and DNA damage-regulated gene 1 (PDRG1) forma part del complex semblant a prefoldina (PFDLc) tant en plantes com en animals. No obstant això, encara no està clar si PDRG1 funciona principalment com a subunitat de PFDLc o com una entitat independent. En aquest estudi, demostrem que la pèrdua d'activitat de PDRG1 en Arabidopsis thaliana condueix a letalitat embrionària, un fenotip que també s'ha observat en mutacions d'altres proteïnes semblants a prefoldina, com UXT i AtURI. Els nostres resultats indiquen que les subunitats de PFDLc són els principals interactors de PDRG1 in vivo, i que els interactomes de PDRG1, UXT i AtURI mostren una superposició considerable, particularment amb subunitats de la RNA polimerasa nuclear i dels complexos d'espliceosoma. Aquests descobriments confirmen que PDRG1 és essencial per al desenvolupament d'Arabidopsis i que la seua funció principal és com a subunitat del PFDLc. D'altra banda, el complex R2T/PFDL té un paper en la regulació de la formació de call i la diferenciació de brots en Arabidopsis. Els mutants tpr5, aturi i pfd2,6 presenten defectes en el manteniment del creixement de cèl·lules indiferenciades, mentre que els calls mutants mostren una major capacitat per a formar brots. L'anàlisi transcriptòmic d'aquests tres mutants en medis CIM i SIM revela canvis significatius en l'expressió gènica, la qual cosa suggereix que R2T/PFDL actua riu amunt de les principals vies moleculars que promouen la formació de call i eviten la diferenciació de brots. Els nostres resultats indiquen que aquests defectes en els mutants estan mediats per una expressió alterada de gens relacionats amb la paret cel·lular. En general, R2T/PFDL emergeix com un regulador clau de les vies que controlen la formació i diferenciació del call en Arabidopsis., [EN] P53 and DNA damage-regulated gene 1 (PDRG1) is part of the prefoldin-like complex (PFDLc) in both plants and animals. However, it remains unclear whether PDRG1 functions mainly as a subunit of PFDLc or as an independent entity. In this study, we show that loss of PDRG1 activity in Arabidopsis thaliana leads to embryonic lethality, a phenotype that has also been observed with mutations in other prefoldin-like proteins, UXT and AtURI. Our results show that the subunits of PFDLc are the major interactors of PDRG1 in vivo, and the interactomes of PDRG1, UXT and AtURI show considerable overlap, particularly with subunits of nuclear RNA polymerase and spliceosome complexes. These results confirm that PDRG1 is essential for Arabidopsis development and functions mainly as a subunit of PFDLc. On the other hand, the R2T/PFDL complex plays a role in the regulation of callus formation and shoot differentiation in Arabidopsis. The mutants tpr5, aturi and pfd2,6 show defects in maintaining the growth of undifferentiated cells, whereas the mutant calli show an enhanced ability to form shoots. Transcriptomic analysis of the three mutants in CIM and SIM media shows significant changes in gene expression, suggesting that R2T/PFDL acts upstream of key molecular pathways that promote callus formation and prevent shoot differentiation. Our results suggest that these defects in the mutants are mediated by impaired expression of cell wall-related genes. Overall, R2T/PFDL emerges as a potential regulator upstream of the known pathways controlling callus formation and differentiation., La realización de esta Tesis Doctoral ha sido posible gracias a una Subvención Santiago Grisolía de la Generalitat Valenciana (GRISOLIAP/2018/001) Así mismo, el trabajo experimental ha sido financiado por el proyecto [ILOVEPFD] del Ministerio de Ciencia e Innovación AEI-MICINN (PID2019-109925GB-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Psychological Assessments with Open-Ended Questionnaires and Large Language Models: An ASD Case Study

  • Altozano-Fernández, Alberto|||0009-0006-3470-5836
  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Maddalon, Luna
[EN] Open-ended questionnaires allow respondents to express freely, capturing richer information than close-ended formats, but they are harder to analyze. Recent natural language processing advancements enable automatic assessment of open-ended responses, yet its use in psychological classification is underexplored. This study proposes a methodology using pre-trained large language models (LLMs) for automatic classification of open-ended questionnaires, applied to autism spectrum disorder (ASD) classification via parental reports. We compare multiple training strategies using transcribed responses from 51 parents (26 with typically developing children, 25 with ASD), exploring variations in model fine-tuning, input representation, and specificity. Subject-level predictions are derived by aggregating 12 individual question responses. Our best approach achieved 84\% subject-wise accuracy and 1.0 ROC-AUC using an OpenAI embedding model, per-question training, including questions in the input, and combining the predictions with a voting system. In addition, a zero-shot evaluation using GPT-4o was conducted, yielding comparable results, underscoring the potential of both compact, local models and large out-of-the-box LLMs. To enhance transparency, we explored interpretability methods. Proprietary LLMs like GPT-4o offered no direct explanation, and OpenAI embedding models showed limited interpretability. However, locally deployable LLMs provided the highest interpretability. This highlights a trade-off between proprietary models' performance and local models' explainability. Our findings validate LLMs for automatically classifying open-ended questionnaires, offering a scalable, cost-effective complement for ASD assessment. These results suggest broader applicability for psychological analysis of other conditions, advancing LLM use in mental health research., This publication is part of the R&D&I project with reference (IDI20201146), funded by The CDTI of the Spanish MCIU; part of the R&D&I project with reference PID2020-116422RB-C21, funded by MICIU/AEI/10.13039/501100011033; and by the Generalitat Valenciana (CIGE/2023/160). MEM received partial funding by the Generalitat Valenciana (GRISOLIAP/2019/137).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Limits on the nuclearite flux using the ANTARES neutrino telescope

  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bendahman, M.
  • Benfenati, F.
  • Bertin, V.
  • Biagi, S.
  • Bissinger, M.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
[EN] In this work, a search for nuclearites of strange quark matter by using nine years of ANTARES data taken in the period 2009-2017 is presented. The passage through matter of these particles is simulated taking into account a detailed description of the detector response to nuclearites and of the data acquisition conditions. A down-going flux of cosmic nuclearites with Galactic velocities (beta = 10(-3)) was considered for this study. The mass threshold for detecting these particles at the detector level is 4 x 10(13) GeV/c(2). Upper limits on the nuclearite flux for masses up to 10(17) GeV/c(2) at the level of similar to 5 x 10(-17) cm(-2) s(-1) sr(-1) are obtained. These are the first upper limits on nuclearites established with a neutrino telescope and the most stringent ever set for Galactic velocities., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41,-A-C42, -B-C43, -B-C44 and refs. PID2021-124591NB-C41, -C42, -C43) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (refs. GRISOLIA/2018/119,/2021/192) and GenT (refs. CIDEGENT/2018/034,/2019/043,/2020/049,/2021/023) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Blazars as a potential origin of the KM3-230213A event

  • Adriani, O.
  • Albert, A.
  • Alhebsi, A.R.
  • Alshalloudi, S.
  • Garre, S. Alves
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Bariego-Quintana, A.
  • Celli, S
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] The KM3NeT collaboration has reported the detection of the highest energy neutrino event observed to date. The energy of the event is of the order of 220PeV hinting towards a neutrino flux at the highest energies. In this article, the potential blazar origin for this event is explored. The publicly available Astro-Multimessenger Modeling software is used to model the blazar gamma-ray and neutrino fluxes. It is concluded that a population of blazars could produce the diffuse flux compatible with the observation of the ultra-high energy event detected by the KM3NeT/ARCA detector. At the same time, the gamma-ray flux produced by such a population of blazars is consistent with the diffuse gamma-ray flux measured by the Fermi Large Area Telescope., The authors acknowledge the financial support of: KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, The Provence-Alpes-Cote d'Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Cote d'Azur region, the Bouches-du-Rhone Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, The CNRS Institut National de Physique Nucleaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This research was funded by the European Union (ERC MuSES project No 101142396); The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union -NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre", carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; The program: "Excellence initiative-research university" for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/2/ST6/00004 and ARTIQ/0004/2021; Ministry of Education and Scientific Research, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6. 2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union -NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2020/049, CIDEGENT/2021/23, CIDEIG/2023/20, ESGENT2024/24, CIPROM/2023/51, GRISOLIAP/2021/192 and IN-NVA1/2024/110 (IVACE+i), Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subspace-Based Takagi-Sugeno Modeling for Improved LMI Performance

  • Robles-Ruiz, Ruben
  • Bernal Reza, Miguel Ángel
  • Gonzalez-German, Ivan Temoatzin
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Given a nonlinear system, the sector-nonlinearity methodology provides a systematic way of transforming it in an equivalent Takagi-Sugeno (T-S) model. However, such transformation is not unique: conservatism of shape-independent performance conditions in the form of linear matrix inequalities results in some models yielding better results than others. This paper provides some guidelines on choosing a sector-nonlinearity T-S model, with provable optimality (in a particular sense) in the case of quadratic nonlinearities. The approach is based on Hessian and restrictions of a function onto a subspace., This work was supported by the following institutions: Project Ciencia Basica SEP-CONACYT CB-168406, Project DPI2016-81002, (Spanish government, MINECO), Grant PROMETEOII/2013/004 (Generalitat Valenciana) and, the Scholarship GRISOLIA/2014/006.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiationless anapole states in on-chip photonics

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Bauer, Thomas
  • Barreda, Ángela I.
  • Kuipers, K.
[EN] High-index nanoparticles are known to support radiationless states called anapoles, where dipolar and toroidal moments interfere to inhibit scattering to the far field. In order to exploit the striking properties arising from these interference conditions in photonic integrated circuits, the particles must be driven in-plane via integrated waveguides. Here, we address the excitation of electric anapole states in silicon disks when excited on-chip at telecom wavelengths. In contrast to normal illumination, we find that the anapole condition¿identified by a strong reduction of the scattering¿does not overlap with the near-field energy maximum, an observation attributed to retardation effects. We experimentally verify the two distinct spectral regions in individual disks illuminated in-plane from closely placed waveguide terminations via far-field and near-field measurements. Our finding has important consequences concerning the use of anapole states and interference effects of other Mie-type resonances in high-index nanoparticles for building complex photonic integrated circuitry., E.D.E. acknowledges funding from Generalitat Valenciana under grant GRISOLIAP/2018/164. A.I.B. acknowledges financial support by the Alexander von Humboldt Foundation. T.B. and L.K. acknowledge support from the European Research Council (ERC) Advanced Investigator Grant no. 340438-CONSTANS. E.P.-C. gratefully acknowledges support from the Spanish Ministry of Science and Innovation under grant FJCI-2015-27228 and postdoctoral research stay grant CAS19/00349. A.M. thanks funding from Generalitat Valenciana (Grants No. PROMETEO/2019/123, BEST/2020/178 and IDIFEDER/2018/033) and Spanish Ministry of Science, Innovation and Universities (Grants No. PRX18/00126 and PGC2018-094490-BC22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-performance liquid chromatography and UV-visible measurements to optimize the storage of volume holograms in hydrogels

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Cárdenas, Daniel
  • Nieto-Rodríguez, Belén
  • Morales-Vidal, Marta
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The storage of time-stable holographic gratings in photohydrogels when the material is immersed in liquid media represents a great challenge at present. A very important stage in the process of storing holograms in photohydrogels are the washing stages to eliminate the remains of the components that have not reacted in the photochemical reaction. The main goal of this work is focusing on the study of the optimization of the washing stages of the photohydrogels based on acrylamide and N,N¿-methylenebis(acrylamide) once unslanted transmission holograms have been stored. For the purpose of determining the compositions of the wash solutions, High-Performance Liquid Chromatography and UV-visible measurements have been employed in our system. PBST and DMSO:H2O 6:4 (v/v) are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38.0 and 27.6% are reached when PBST and DMSO:H2O 6:4 are employed, respectively., Work funded by Ministerio de Ciencia e Innovacion, Spain, under project PID2019-106601RB-I00; by Generalitat Valenciana under projects GRISOLIAP/2019/143, CIDEXG/2022/60, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program), Spain. K. Berramdane thanks to the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain). M. I. Lucio acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelization of extended axial field-of-view PET scanners to analyze the performance improvement

  • Peña-Acosta, Miriam Magela
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • M. Lorduy|||0000-0002-8942-8278
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Positron Emission Tomography (PET) offers non-invasive insights into physiological processes. However, in clinical practice conventional PET scanners face limitations in comprehensive imaging due to their restricted axial field of view (FOV).This study explores the benefits and challenges of extending PET scanner AFOV using Monte Carlo simulation with GATE 9.1. The Biograph Vision Quadra scanner is a novel system based on the Digital Biograph Vision 600 scanner. Both devices use silicon photomultipliers and 3.2 x 3.2 × 20 mm Lutetium Oxyorthosilicate crystals (LSO). However, the 32 detector rings of the Quadra scanner enable a four-fold expansion in the Axial Field Of View (FOV) compared to Vision. As a result, higher sensitivity, and an enhancement of noise equivalent count rate and image quality are achieved. The purpose of this study is to analyze the effect of increasing the number of detector rings and the axial FOV on the scanner performance. To accomplish this, four different geometries are modeled using GATE (GEANT4 Application for Tomographic Emission). Based on the Biograph Vision 600 model, the length and the number of detector rings are gradually extended to reach the length of the Quadra scanner. Thus, four geometries with 8 (25.6 cm), 16 (51.2 cm), 24 (76.8 cm) and 32 (102.4 cm) detector rings are simulated, keeping the crystal configuration and the dimensions in the transaxial plane. The study evaluates sensitivity, Noise Equivalent Count Rate (NECR), and image quality parameters. Results indicate a significant increase in sensitivity and NECR with FOV extension, underscoring enhanced performance. However, artifact occurrence, particularly concentric circular patterns and background homogeneity changes, accentuates with extended AFOV. Normalization algorithms, particularly component-based normalization, mitigate these artifacts. This study contributes to the understanding of the advantages and limitations of extending PET scanner AFOV, offering insights into the effectiveness of component-based normalization for improving PET image quality., The authors are indebted to the Santiago Grisolia Program (GRISOLIAP/2021/186) for its training research personnel and the support of the BIORA Project (PROMETEO/2018/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Search for an eV-scale sterile neutrino with the first six detection units of KM3NeT/ORCA

  • Adriani, O.
  • Albert, A
  • Alhebsi, A. R.
  • Alshalloudi, S.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Baret, B.
  • Ardid, Miguel|||0000-0002-3199-594X
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] The existence of an eV-scale sterile neutrino has been proposed to explain several anomalous experimental results obtained over the course of the past 25 years. The first search for such a sterile neutrino conducted with data from KM3NeT/ORCA - a water Cherenkov neutrino telescope under construction at the bottom of the Mediterranean Sea - is reported in this paper. GeV-scale atmospheric neutrino oscillations are measured by reconstructing the energy and arrival direction of up-going neutrinos that have traversed the Earth. This study is based on a data sample containing 5828 neutrino candidates collected with 6 detection units (5% of the complete detector), corresponding to an exposure of 433 kton-years. From the expected effect of an eV-scale sterile neutrino on the first nu(mu) -> nu(tau) standard oscillation maximum, simultaneous constraints are put on the magnitude of the U-mu 4 and U-tau 4 mixing elements assuming triangle m(41 )(2)>= 1 eV(2). The results are compatible with the absence of mixing between active neutrinos and a sterile state, with |U-mu 4|(2) < 0.138 and |U-tau 4|(2) < 0.076 at a 90% confidence level. Such constraints are compatible with the results reported by other long-baseline experiments, and indicate that with KM3NeT/ORCA it is possible to bring crucial contributions to sterile neutrino searches in the coming years., The authors acknowledge the financial support of: KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GA & Ccaron;R 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris & Icirc;le-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, The Provence-Alpes-Cote d'Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Cote d'Azur region, the Bouches-du-Rhone Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, The CNRS Institut National de Physique Nucleaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This research was funded by the European Union (ERC MuSES project No 101142396); The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre", carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; The program: 'Excellence initiative-research university' for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/2/ST6/00004 and ARTIQ/0004/2021; Ministry of Education and Scientific Research, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6. 2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2020/049, CIDEGENT/2021/23, CIDEIG/2023/20, ESGENT2024/24, CIPROM/2023/51, GRISOLIAP/2021/192 and INNVA1/2024/110 (IVACE+i), Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA - Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

gSeaGen code by KM3NeT: An efficient tool to propagate muons simulated with CORSIKA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A.R.
  • M. Alshamsi
  • Garre, S. Alves
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Atmani, H.
  • Baret, B.
  • Biagi, S.
  • Celli, S
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gSeaGen code was not only extended in terms of functionality but also underwent a thorough redesign of the muon propagation routine, resulting in a more accurate and efficient simulation. This paper presents the capabilities of the new gSeaGen code as well as prospects for further developments.; Program summary; Program title: gSeaGen; CPC Library link to program files: https://doi.org/10.17632/ymgxvy2br4.2; Developer's respository link: git.km3net.de/opensource/gseagen; Licensing provisions: BSD 3-Clause; Programming language: C++; Nature of problem: Integration of the state-of-the-art extensive air shower Monte Carlo event generator CORSIKA [1] into the atmospheric muon simulation for water Cherenkov neutrino telescopes. The primary use case considered is the KM3NeT experiment [2], however, the code should be able to cover other similar experiments as well. The challenges in this work included interfacing the CORSIKA binary output, efficient handling of already generated events to reduce the overall computational cost, and preserving all the additional available information, which can be invaluable in physics analyses.; Solution method: The readout of CORSIKA simulation was adapted from the base script provided together with CORSIKA and implemented as a standalone flux driver in gSeaGen. The propagation routine has been redesigned to support the geometry of extensive air shower simulations and to improve its efficiency in propagating particles to the detector. To ensure a reliable modelling of muon energy loss and scattering, PROPOSAL [3] was set as the default internal code for muon transport. PROPOSAL is an open-source software developed and maintained by the IceCube collaboration [4] and is a well-established solution used by the neutrino physics community.; Additional comments including restrictions and unusual features: The code was tested with GENIE [5] version 3.4.0 and PROPOSAL 6.1.5. Currently, linking of gSeaGen to GENIE is mandatory, even in the case of a muon-only simulation using CORSIKA., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Labex UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-2213708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - NextGenerationEU, CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO)), the Netherlands; The National Science Centre, Poland, grant number 2021/41/N/ST2/01177; We gratefully acknowledge the funding support by program "Excellence initiative-research university'' for the AGH University in Krakow as well as the ARTIQ project: UMO-2021/01/2/ST6/00004 and ARTIQ/0004/2021; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre'', carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by ``ERDF A way of making Europe'', for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23, for CIDEIG/2023/20 and for GRISO-LIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of cold seawater pre-treatments on induction of early sexual maturation and sperm production in European eel (Anguilla anguilla)

  • Ferrão, Leonor
  • Morini, Marina
  • González-López, Wendy Ángela
  • Felip, Alicia
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] To induce sexual maturation in captivity, eels rely on hormonal treatments, but this process is costly and time-consuming. As an alternative, different types of conditioning, also referred as pre-treatment, have been assessed to ease hormonal treatment response. Recent studies have shown that migrating eels experience a wide range of temperatures, varying from 12 °C at night to as low as to 8 °C during the day. Therefore, this study evaluates the effects of low-temperature (10 °C) seawater pre-treatments of different durations (2 and 4 weeks) on male eel reproduction. The eye, gonadosomatic and hepatosomatic indexes from control (without thermic seawater pre-treatment) and pre-treated fish were measured. Blood and testis samples were also collected for sex steroid and histology analysis, respectively. Eels pre-treated for 2 weeks demonstrated increased progestin levels, comparing with the control group. Eels pre-treated for 4 weeks showed significantly higher gonadosomatic index and elevated androgens and estradiol levels in comparison with the remaining groups. In eels pre-treated for 2 and 4 weeks, there was an increase in the proportion of spermatogonia type B cells compared to undifferentiated spermatogonia type A, a differentiation process that was not observed in the control group. Cold seawater pre-treatment induced early sexual maturation, including steroid production, which consequently stimulated biometric changes and increased spermatogonia differentiation. Following the pre-treatments, eels started receiving standard hormonal treatment (with recombinant human chorionic gonadotropin at 20 °C). Pre-treated males started to spermiate earlier than the control group. In some treatment weeks, pre-treated individuals registered higher values of sperm density, motility, and kinetic parameters. Moreover, an economic evaluation was carried out relating the investment made in terms of hormone injections with the volume of high-quality sperm obtained from each experimental group. The low temperature pre-treatments demonstrated their economic effectiveness in terms of hormone treatment profitability, increasing the production of high-quality sperm in the European eel. Thus, this in vivo study suggests that cold seawater pre-treatment may increase sensitivity to the hormone applied during standard maturation treatment., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funded by the Spanish Ministry of Science, Innovation and Universities (MCIU; Project EELGONIA; RTI2018-096413-B-I00). L.F. had a PhD contract funded by the Generalitat Valenciana, Programa Grisolía (GRISOLIAP/2020/063). M.M. had a postdoctoral contract from the MCIU (MCIN/AEI/https:// doi.org/10.13039/501100011033) funded by European Union NextGenerationEU/ PRTR (C17. I1) and by Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. W.A.G.- L had a Margarita Salas postdoctoral contract (RD 289/2021.UAB) from the Spanish Ministry of Universities. V.G. had a Beatriz Galindo aid (BG22/00024; for the attraction of research talent 2022) funded by the Ministerio de Universidades (Spain). Funding for open access charge: CRUE-Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PET image reconstruction and dosimetry from voxelized phantoms with GATE

  • M. Lorduy|||0000-0002-8942-8278
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Avelino de Andrade, Pedro H.
  • Peña-Acosta, Miriam Magela
[EN] Accurate patient-specific internal dosimetry is a critical concern in the field of nuclear medicine. GATE is a robust Monte Carlo toolkit renowned for its integration of Geant4 algorithms, PET specialized tools and patient-specific dosimetry estimation. In this work, a GATE model is developed to simulate the PET scanner Biograph Vision and a voxelized phantom from Computed Tomography (CT) images. The segmentation of the CT images is performed using a deep learning model capable of automatically delineating anatomical structures, setting the basis for creating the patient-specific voxel phantom. GATE Nested parameterization method is employed for its efficient memory usage in defining geometry and faster navigation for ultra-large number of voxels. Simultaneously, PET acquisition data is used to assign the corresponding activity of a source to each voxel. This study aims to highlight the potential of GATE as a simulation tool within a methodology that integrates PET image recon- struction and internal dosimetry calculation, focused specifically on its application in prostate diagnostic testing via 18F-FDG. S-Value and dose are calculated for the prostate gland, yielding values of 1.52 E 4 mGy/MBq¿s and 8.1 mGy, respectively, consistent with literature findings. Differences in S-Values with the ICRP Phantom and with OpenDose for surrounding organs range from 0.5% to 67.9%, which can be attributed to the choice of phantoms used in calculations. This work confirms the capability of GATE to reproduce clinical studies using anthropomorphic voxelized models., The authors are indebted to the Santiago Grisolia Program (GRISOLIAP/2021/186) for its training research personnel and the support of the BIORA (PROMETEO/2018/035) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Insights into Adsorption of Linear, Monobranched, and Dibranched Alkanes on Pure Silica STW Zeolite as a Promising Material for Their Separation

  • Pérez-Botella, Eduardo
  • Misturini, Alechania
  • Sala-Gascon, Andres
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The adsorption of linear, monobranched and dibranched saturated hydrocarbons in the gasoline range has been studied on pure silica STW zeolite (Si-STW) by using pentane, hexane, and heptane isomers as model adsorbates. Experimental single-component adsorption isotherms and kinetic measurements together with configurational bias Monte Carlo (CBMC) and molecular dynamics (MD) simulations were carried out. Significant differences in both the equilibrium adsorption and especially the adsorption kinetics were found, which suggests that the separation of the quaternary-carbon dibranched isomer is feasible. The adsorption capacities and selectivities surpass those of pure silica MFI (Si-MFI), considered as reference. Altogether, Si-STW is presented as a promising adsorbent for increasing the octane number (ON) of the hydroisomerization product by selectively excluding quaternary-carbon dibranched hydrocarbons., We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. A.S. thanks the MCIU for his grant BES-2016-078684. E.P.B. thanks the MCIU for his grant (FPU15/01602). A.M. thanks the Generalitat Valenciana for a predoctoral fellowship GRISOLIAP/2019/084. A.M. and G.S. thank ASIC-UPV for the computational facilities. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical twin-vortex multi-trapping by Kolakoski lenses

  • Pérez-Hernández, Arlen Beatriz
  • Garmendía-Martínez, Adrián
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter D.
[EN] In this work, we design and implement a new bifocal diffractive spiral lens within an optical tweezers system. The proposed diffractive optical element coined Kolokaski Kinoform Spiral Lens (KKSL), generates twin optical vortices along the propagation direction. The axial positions, as well as the diameters of the generated vortex beams, are correlated with the Kolakoski aperiodic sequence introduced in the design of the diffractive lens. The unique properties of KKSLs make it ideal for optical trapping applications, allowing independent multiple trapping and particle displacement within each optical vortex beam. We present both the focusing properties of KKSL and the experimental results of its integration into the optical tweezer setup., This work was supported by the Spanish Ministerio de Ciencia e Innovacion (grant PID2022-142407NB-I00) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. A.G.M. and A.B.P. acknowledge the financial support from the Generalitat Valenciana (GRISOLIAP/2021/121) and Universitat Politecnica de Valencia (PAID-01-23), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of alginate purity and M/G ratio by methanolysis coupled with anion exchange chromatography

  • Bojorges-Gutierrez, Hylenne
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
  • Martínez-Abad, Antonio
[EN] Alginates are industrially relevant polysaccharides widely used in the food and biomedical industries for their excellent gelling properties. The growing emphasis on the valorization of marine resources has evidenced the need for alternative methods for the determination of both alginate content and the M/G ratio. This study describes the application of acid methanolysis and separation by anion exchange chromatography. Five samples, including alginates extracted from Saccharina latissima, Ascophyllum nodosum, a certified standard, and two polyuronates (Poly-M and Poly-G), were analysed for their M/G ratio and alginate content at different treatment conditions, and compared with other conventionally used or reference methods (NMR, FTIR, and colorimetric methods). Quantitative estimation of alginate was relatively accurate at optimum conditions (4 h at 100 ¿C), as compared with the certified standard or with other colorimetric methods. M/G ratios were not significantly different from those determined after the reference method ( 1 H NMR) or compared to FTIR protocols. The results evidence that methanolysis may be applied to simultaneously estimate the purity and M/G ratio of alginate-rich samples in a single analysis., The authors acknowledge funds from the project PID2020-117744RJ-I00, grant CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo de materiales cerámicos base circona sinterizados mediante técnicas rápidas no convencionales

  • Guillén Pineda, René Miguel
[ES] Los avances tecnológicos se encuentran, en algunas ocasiones, limitados debido a la imposibilidad de combinar las excelentes prestaciones de los materiales conocidos con algunas funcionalidades críticas necesarias para desarrollar nuevas aplicaciones tecnológicas. Estos nuevos materiales con un diseño a la carta resultan extremadamente interesantes ya que permiten combinar propiedades y funcionalidades actualmente inalcanzables. La circona, u oxido de zirconio (ZrO2), es un sólido cristalino blanco con enlaces iónicos altamente estables que es principalmente obtenido en forma de polvo para aplicaciones tecnológicas. Debido a sus propiedades física y químicas, la circona es un material cerámico que posee una serie de características excepcionales, que incluyen una dureza, tenacidad y fractura relativamente altas en comparación con otros materiales cerámicos, bajo coeficiente de fricción y alto punto de fusión. Además, es un material relativamente no reactivo cuando se expone a ambientes húmedos y corrosivos en comparación con otros materiales como metales y polímeros, con buena resistencia a altas temperaturas y abrasión. Todas estas propiedades posicionan a la circona como un material muy versátil con un amplio espectro de aplicaciones que abarca intercambiadores de calor, celdas de combustible, componentes de turbinas para sistemas aeronáuticos y generación de electricidad, así como para medicina, odontología y otras aplicaciones. El propósito de esta tesis doctoral es la obtención de materiales base circona que puedan ser empleados en la fabricación de nuevos composites con funcionalidades a la carta en sectores tecnológicos como el transporte, energía, medicina, etc. Para ello se utilizarán técnicas de sinterización no-convencionales: Microondas (MW) y Spark Plasma Sintering (SPS). Para este trabajo se plantea el estudio de distintos composites base circona: circona reforzada con óxido de niobio (Nb2O5), Titania (TiO2) y composites de circona reforzados con manganita de lantano dopada con estroncio (LSM). El resultado final de esta investigación permitirá determinar si las técnicas rápidas de sinterización no-convencional, permiten mejoran las propiedades mecánicas, eléctricas y magnéticas de los materiales obtenidos en comparación con la sinterización por métodos convencionales., [CA] Els avenços tecnològics són, en algunes ocasions, limitats per la impossibilitat de combinar l'excel·lent comportament dels materials coneguts amb algunes funcionalitats crítiques necessàries per desenvolupar noves aplicacions tecnològiques. Aquests nous materials amb disseny a la carta resulten summament interessants ja que permeten combinar propietats i funcionalitats actualment inabastables. La circonia, o òxid de zirconi (ZrO2), és un sòlid cristal·lí blanc amb enllaços iònics altament estables que s'obté principalment en forma de pols per a aplicacions tecnològiques. A causa de les seves propietats físiques i químiques, la zircònia és un material ceràmic que posseeix una sèrie de característiques excepcionals, que inclouen duresa, tenacitat i fractura relativament altes en comparació amb altres materials ceràmics, baix coeficient de fricció i alt punt de fusió. A més, és un material relativament no reactiu quan s'exposa a ambients humits i corrosius en comparació amb altres materials com metalls i polímers, amb bona resistència a altes temperatures i abrasió. Totes aquestes propietats posicionen a la zircònia com un material molt versàtil amb un ampli espectre d'aplicacions que inclou intercanviadors de calor, piles de combustible, components de turbines per a sistemes aeronàutics i generació d'electricitat, així com per a medicina, odontologia i altres aplicacions. L'objectiu d'aquesta tesi doctoral és l'obtenció de materials base de zircònia que puguin ser utilitzats en la fabricació de nous compòsits amb funcionalitats sota demanda en sectors tecnològics com transport, energia, medicina, etc. Per a això, s'utilitzaran tècniques de sinterització no convencionals utilitzat: microones (MW) i sinterització per plasma d'espurna (SPS) Per a aquest treball es proposa l'estudi de diferents composites a força de zircònia: zircònia reforçada amb òxid de niobi (Nb2O5), titanat (TiO2) i composites de zircònia reforçats amb manganita de lantani dopat amb estronci (LSM). El resultat final d'aquesta investigació permetrà determinar si les tècniques de sinterització ràpida no convencional permeten millorar les propietats mecàniques, elèctriques i magnètiques dels materials obtinguts en comparació amb la sinterització per mètodes convencionals., [EN] Technological advances are, on some occasions, limited due to the impossibility of combining the excellent performance of known materials with some critical functionalities necessary to develop new technological applications. These new materials of great design are extremely interesting since they allow combining properties and functionalities currently unattainable. Zirconia, or zirconium oxide (ZrO2), is a white crystalline solid with highly stable ionic bonds that is mainly obtained in powder form for technological applications. Due to its physical and chemical properties, zirconia is a ceramic material that possesses several exceptional characteristics, including relatively high hardness, toughness and fracture compared to other ceramic materials, low coefficient of friction, and high melting point. Furthermore, it is a relatively non-reactive material when exposed to humid and corrosive environments compared to other materials such as metals and polymers, with good resistance to high temperatures and abrasion. All these properties position zirconia as a very versatile material with a wide spectrum of applications that includes heat exchangers, fuel cells, turbine components for aeronautical systems and electricity generation, as well as for medicine, dentistry, and other applications. The purpose of this doctoral thesis is to obtain zirconia base materials that can be used in the manufacture of new composites with on-demand functionalities in technological sectors such as transport, energy, medicine, etc. For this, non-conventional sintering techniques will be used: Microwaves (MW) and Spark Plasma Sintering (SPS) For this work, the study of different zirconia-based composites is proposed: zirconia reinforced with niobium oxide (Nb2O5), titania (TiO2) and zirconia composites reinforced with strontium-doped lanthanum manganite (LSM). The result of this research will make it possible to determine whether rapid non-conventional sintering techniques allow the mechanical, electrical, and magnetic properties of the materials obtained to be improved compared to sintering by conventional methods., El autor agradece a la Generalitat Valenciana por la ayuda económica recibida para la beca del programa Santiago Grisolía (GRISOLIAP/2018/168)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of PBAT Processability and Mechanical Performance by Blending with Pine Resin Derivatives for Injection Moulding Rigid Packaging with Enhanced Hydrophobicity

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldas, Miguel
  • Arrieta, Marina P.
[EN] Polybutylene adipate-co-terephthalate (PBAT) is a biodegradable polymer with good features for packaging applications. However, the mechanical performance and high prices of PBAT limit its current usage at the commercial level. To improve the properties and reduce the cost of PBAT, pine resin derivatives, gum rosin (GR) and pentaerythritol ester of GR (UT), were proposed as sustainable additives. For this purpose, PBAT was blended with 5, 10, and 15 wt.% of additives by melt-extrusion followed by injection moulding. The overall performance of the formulations was assessed by tensile test, microstructural, thermal, and dynamic mechanical thermal analysis. The results showed that although good miscibility of both resins with PBAT matrix was achieved, GR in 10 wt.% showed better interfacial adhesion with the PBAT matrix than UT. The thermal characterization suggested that GR and UT reduce PBAT melting enthalpy and enhance its thermal stability, improving PBAT processability. A 10 wt.% of GR significantly increased the tensile properties of PBAT, while a 15 wt.% of UT maintained PBAT tensile performance. The obtained materials showed higher hydrophobicity than neat PBAT. Thus, GR and UT demonstrated that they are advantageous additives for PBAT-resin compounding for rigid food packaging which are easy to process and adequate for industrial scalability. At the same time, they enhance its mechanical and hydrophobic performance., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO), projects: PROMADEPCOL (MAT2017-84909-C2-2-R) and CTM2017-88989-P as well as by the European Union s Horizon 2020 research and innovation program under grant agreement no. 860407 BIO-PLASTICS EUROPE. M.A. thanks Secretaría de Educación Superior, Ciencia, Tecnología e Innovación (SENESCYT) and Escuela Politécnica Nacional (EPN). C.P. thanks Santiago Grisolía fellowship (GRISOLIAP/2019/113) from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and Application of Low-Cost and Environment-Friendly Techniques for Fish Sperm Cryopreservation

  • de Souza-França, Thales
[ES] La criopreservación de semen de peces es una técnica que puede aumentar la eficiencia de la reproducción en cautiverio de especies de peces de agua dulce y marinas. A lo largo de las últimas décadas, se han establecido protocolos para criopreservación de semen de diversas especies de peces. Sin embargo, el foco principal de los pescadores ha sido en tener éxito en el congelamiento y descongelamiento de los espermatozoides, no llevando en cuenta el período en que los gametos se quedan expuestos a la solución crioprotectora en un momento previo a la fertilización. Esta exposición de los espermatozoides a las soluciones crioprotectoras después del descongelamiento puede ser perjudicial a la calidad de los gametos, ya que pueden ser tóxicos. La mayoría de los protocolos establecidos utilizan recipientes de plástico ultrarresistentes para almacenar el semen durante el proceso de criopreservación. Estos recipientes normalmente no se reutilizan, generando residuos altamente contaminantes al medio ambiente. Así, el objetivo principal de la tesis fue crear y probar métodos de bajo costo que potencialicen el uso de los espermatozoides descongelados de peces y torne el proceso de criopreservación de semen menos contaminante al medio ambiente. Los experimentos de los capítulos 1 y 2 se llevaron a cabo en Brasil. Utilizamos el jundiá gris Rhamdia quelen, especie considerada modelo experimental para peces nativos de América del Sur. En el capítulo 1, probamos el uso de la dilución de semen descongelado para disminuir la toxicidad de la solución crioprotectora. La técnica se utiliza comúnmente en protocolos de criopreservación de semen de mamíferos, pero nunca antes se había aplicado al semen descongelado de peces suramericanos. Muestras de semen descongelado de R. quelen se diluyeron en un diluyente salino (NaCl al 1,1% - 325 mOsm kg-1; pH 7,6). Después, observamos que los espermatozoides de muestras diluidas mostraron mayores velocidades, rectitud, progresión y frecuencia de batido flagelar que las muestras no diluidas. La dilución del semen descongelado también proporcionó mayores tasas de fertilización y eclosión que el grupo no diluido. De esta manera, la dilución de semen descongelado de R. quelen resultó ser una metodología sencilla, económica y eficiente que debe incluirse en el protocolo de criopreservación del semen de la especie. En los capítulos 2 y 3 desarrollamos y probamos la metodología para el uso de cápsulas de gelatina biodegradables (colágeno) y cápsulas de hipromelosa biodegradables (HPMC) como recipiente alternativo al uso de pajuelas de plástico en la criopreservación de semen de peces. En el segundo capítulo observamos que las cápsulas biodegradables mantuvieron los parámetros cinéticos y la capacidad reproductiva del esperma de R. quelen así como las pajuelas de plástico.Los procedimientos experimentales del capítulo 3 se llevaron a cabo en España. En este capítulo aplicamos la metodología desarrollada en el capítulo 2 para la criopreservación del semen de anguila europea Anguilla anguilla, dorada Sparus aurata y lubina Dicentrarchus labrax. En estas tres especies, las cápsulas biodegradables conservaron los parámetros cinéticos y la integridad de la membrana de los espermatozoides, así como las pajuelas de plástico. Además, observamos que el daño al ADN en muestras de semen de anguila europea y lubina europea criopreservadas en cápsulas y pajuelas no difirió. Sin embargo, las muestras de semen de dorada mostraron mayor daño en el ADN que las criopreservadas en pajuelas. Aunque, el nivel de daño que observamos en las muestras almacenadas en las cápsulas se considera bajo, por lo que pueden no comprometer el desarrollo embrionario. Evaluamos los resultados y concluimos que las cápsulas de gelatina biodegradables y las cápsulas de HPMC biodegradables pueden utilizarse como recipientes alternativos al uso de pajuelas de plástico para la criopreservación de semen de las cuatro especies de peces., [CA] La criopreservació de l'esperma de peixos és una tècnica que pot augmentar l'eficiència de la reproducció en captivitat d'espècies de peixos d'aigua dolça i marins. Al llarg de les dècades passades, s'han establert protocols per a la criopreservació de l'esperma de diverses espècies de peixos. No obstant això, el focus principal dels pescadors ha estat tenir èxit en la congelació i descongelació dels espermatozoides, sense tenir en compte el temps en què els gamets queden exposats a la solució crioprotectora abans de la fecundació. Aquesta exposició dels espermatozoides a les solucions crioprotectores després de la descongelació pot ser perjudicial per a la qualitat dels gàmetes, ja que poden ser tòxics. La majoria dels protocols establerts utilitzen recipients de plàstic ultrarresistents per emmagatzemar l'esperma durant el procés de criopreservació. Aquests recipients normalment no es reutilitzen, generant residus altament contaminants per al medi ambient. Així, l'objectiu principal de la tesi va ser criar i provar mètodes de baix cost que potenciïn l'ús dels espermatozoides descongelats de peixos i facin que el procés de criopreservació de l'esperma sigui menys contaminant per al medi ambient. Els experiments dels capítols 1 i 2 es van dur a terme a Brasil. Vam utilitzar el jundia gris Rhamdia quelen, una espècie considerada com a model experimental per a peixos natius d'Amèrica del Sud. En el capítol 1, vam provar l'ús de la dilució de l'esperma descongelat per reduir la toxicitat de la solució crioprotectora. Aquesta tècnica s'utilitza comúment en protocols de criopreservació de l'esperma de mamífers, però mai abans s'havia aplicat a l'esperma descongelat de peixos sud-americans. Mostres d'esperma descongelat de R. quelen es van diluir en un diluent salí (NaCl al 1,1% - 325 mOsm kg-1; pH 7,6). Després, vam observar que els espermatozoides de mostres diluïdes mostraven majors velocitats, rectitud, progressió i freqüència de batuda flagel·lar que les mostres no diluïdes. La dilució de l'esperma descongelat també va proporcionar majors taxes de fecundació i eclosió que el grup no diluït. D'aquesta manera, la dilució de l'esperma descongelat de R. quelen va resultar ser una metodologia senzilla, econòmica i eficient que ha d'incloure's en el protocol de criopreservació de l'esperma de l'espècie. En els capítols 2 i 3 vam desenvolupar i provar la metodologia per a l'ús de càpsules de gelatina biodegradables (col·lagen) i càpsules d'hipromelosa biodegradables (HPMC) com a recipient alternatiu a l'ús de canuts de plàstic en la criopreservació de l'esperma de peixos. En el segon capítol vam observar que les càpsules biodegradables mantenien els paràmetres cinètics i la capacitat reproductiva de l'esperma de R. quelen així com els canuts de plàstic. Els procediments experimentals del capítol 3 es van dur a terme a Espanya. En aquest capítol vam aplicar la metodologia desenvolupada al capítol 2 per a la criopreservació de l'esperma d'anguila europea Anguilla anguilla, daurada Sparus aurata i llobarro Dicentrarchus labrax. En aquestes tres espècies, les càpsules biodegradables van conservar els paràmetres cinètics i la integritat de la membrana dels espermatozoides, així com els canuts de plàstic. A més, vam observar que el dany a l'ADN en mostres d'esperma d'anguila europea i llobarro europeu criopreservades en càpsules i canuts no es va diferir. No obstant això, les mostres d'esperma de daurada van mostrar més dany a l'ADN que les criopreservades en canuts. Tot i això, el nivell de dany que vam observar a les mostres emmagatzemades en càpsules es considera baix, pel que poden no comprometre el desenvolupament embrionari. Vam avaluar els resultats i vam concloure que les càpsules de gelatina biodegradables i les càpsules d'HPMC biodegradables es poden utilitzar com a recipients alternatius a l'ús de canuts de plàstic per a la criopreservació de l'esperma de les quatre espècies de peixos., [EN] Fish sperm cryopreservation is a technique that can increase the reproduction in captive efficiency of freshwater and marine fishes.Over the last few decades, protocols for sperm cryopreservation from many fishes have been established. However, the researchers' main focus was successfully freezing and thawing sperm, neglecting the period in which the gametes remain in contact with the cryoprotective solution until fertilization. Exposure of sperm to cryoprotectant solutions after thawing can be harmful to the quality of the gametes since they can be toxic. The majority of the established protocols use ultra-resistant plastic containers to store sperm during the cryopreservation process. These containers usually are not reused, generating highly polluting waste for the environment. Furthermore, in some countries, the containers usually used are sold by a few industries, which makes acquisition difficult and increases the product's price. Thus, the main objective of the thesis was to create and test low-cost methodologies that enhance the use of fish post-thaw sperm and make the sperm cryopreservation process more environmentally friendly. The experiments in the Chapters 1 and 2 were developed in Brazil. We used the South American silver catfish Rhamdia quelen, a species considered an experimental model for native South American fishes. In Chapter 1, we tested the use of post-thawing dilution to reduce the toxicity of the cryoprotectant solution. This technique is commonly used in mammalian sperm cryopreservation protocols but has never before been applied to post-thaw sperm of South American fishes. South American silver catfish post-thaw sperm samples were diluted in a saline extender (1.1% NaCl - 325 mOsm kg-1; pH 7.6). The post-thaw sperm diluted samples showed higher velocities, straightness, progression, and flagellar beat frequency than the cells of undiluted samples (control). The post-thawing dilution also provided higher fertilization and hatching rates than the control group. Thus, the post-thawing sperm dilution proved to be a simple, cheap, and efficient methodology that should be included in the silver catfish sperm cryopreservation protocol. In Chapters 2 and 3, we developed, tested, and described the methodology for using biodegradable gelatin (collagen) and hypromellose (HPMC) capsules as an alternative container to plastic straws in the fish sperm cryopreservation. In the second chapter, we observed that the biodegradable capsules maintained the kinetic parameters and reproductive capacity of South American silver catfish sperm just as effectively as plastic straws. The experimental procedures in Chapter 3 were carried out in Spain. We apply the methodology developed in Chapter 2 to the cryopreservation of sperm from European eel Anguilla anguilla, gilthead seabream Sparus aurata, and European sea bass Dicentrarchus labrax. In these three species, biodegradable capsules preserved the sperm kinetic parameters and membrane integrity just as effectively plastic straws. We observed that DNA damage in European eel and European sea bass sperm samples cryopreserved in capsules and straws did not differ. On the other hand, gilthead seabream sperm samples showed higher DNA damage than those cryopreserved in straws. However, the damage level observed in samples stored in capsules is considered low, thus, may not compromise embryonic development. We observed the results and concluded that biodegradable gelatin and HPMC capsules could be used as alternative containers to plastic straws for sperm cryopreservation from the tfour aquaculture fishes., This study was supported by MICINN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (THINKINAZUL/2021/012;THINKINAZUL/2021/024;THINKINAZUL/2021/042) including the contract of FF-G.WAG-L has a Margarita Salas postdoctoral contract (RD 289/2021. UAB) by the Spanish Ministry of Universities. LF has a PhD contract from Generalitat Valenciana (GRISOLIAP/2020/063). TSF (141717/2019-0 and 200285/2021-1) and MPS (200452/2022-3) have fellowships from Brazilian National Council for Scientific and Technological Development (CNPq).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Implementation and first results of the KM3NeT real-time core-collapse supernova neutrino search

  • Aiello, S.
  • Albert, A.
  • Alshamsi, M.
  • Alves Garre, S.
  • Aly, Z.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Aublin, J.
  • Bagatelas, C.
  • Bou Cabo, Manuel
  • Diego-Tortosa, Dídac
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Llorens Alvarez, Carlos David|||0000-0002-6675-3596
[EN] The KM3NeT research infrastructure is uncon- struction in the Mediterranean Sea. KM3NeT will study atmospheric and astrophysical neutrinos with two multi- purpose neutrino detectors, ARCA and ORCA, primar-ily aimed at GeV¿PeV neutrinos. Thanks to the multi-photomultiplier tube design of the digital optical modules, KM3NeT is capable of detecting the neutrino burst from a Galactic or near-Galactic core-collapse supernova. This potential is already exploitable with the first detection units deployed in the sea. This paper describes the real-time imple- mentation of the supernova neutrino search, operating on the two KM3NeT detectors since the first months of 2019. A quasi-online astronomy analysis is introduced to study the time profile of the detected neutrinos for especially signifi- cant events. The mechanism of generation and distribution of alerts, as well as the integration into the SNEWS and SNEWS 2.0 global alert systems, are described. The approach for the follow-up of external alerts with a search for a neutrino excess in the archival data is defined. Finally, an overview of the cur-rent detector capabilities and a report after the first two years of operation are given., The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education Scientific Research and Professional Training, ICTP through Grant AF-13, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (ref. GRISOLIA/2018/119) and GenT (refs. CIDEGENT/2018/034, /2019/043, /2020/049) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The whole-body motor skills of children with autism spectrum disorder taking goal-directed actions in virtual reality

  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Mantovani, Fabrizia
  • Sirera, Marian
  • Abad, Luis
  • Cervera-Torres, Sergio
  • Gómez-García, Soledad
  • Chicchi Giglioli, Irene Alice
[EN] Many symptoms of the autism spectrum disorder (ASD) are evident in early infancy, but ASD is usually diagnosed much later by procedures lacking objective measurements. It is necessary to anticipate the identification of ASD by improving the objectivity of the procedure and the use of ecological settings. In this context, atypical motor skills are reaching consensus as a promising ASD biomarker, regardless of the level of symptom severity. This study aimed to assess differences in the whole-body motor skills between 20 children with ASD and 20 children with typical development during the execution of three tasks resembling regular activities presented in virtual reality. The virtual tasks asked to perform precise and goal-directed actions with different limbs vary in their degree of freedom of movement. Parametric and non-parametric statistical methods were applied to analyze differences in children's motor skills. The findings endorsed the hypothesis that when particular goal-directed movements are required, the type of action could modulate the presence of motor abnormalities in ASD. In particular, the ASD motor abnormalities emerged in the task requiring to take with the upper limbs goal-directed actions with low degree of freedom. The motor abnormalities covered (1) the body part mainly involved in the action, and (2) further body parts not directly involved in the movement. Findings were discussed against the background of atypical prospective control of movements and visuomotor discoordination in ASD. These findings contribute to advance the understanding of motor skills in ASD while deepening ecological and objective assessment procedures based on VR., This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness-funded project T-EYE: Monitoring system for children with ASD based on artificial intelligence and physiological measures (IDI-20201146), and by the project funded by the Ministry of Science and Innovation of Spain ADAPTEA (PID2020- 116422RB-C21). It was also co-founded by the European Union through the Operational Program of the European Regional development Fund (FEDER) of the Valencian Community 2014 2020 (IDIFEDER/2018/029 and IDIFEDER/2021/038). Furthermore, MM received funding by the Valencian Community (GRISOLIAP/2019/137 and CIBEFP/2021/38), and by the Polytechnic University of Valencia (Predoctoral Mobility Grant of 2021). LG-Z received partial funding from the Valencian Community (ACIF/2021/187). JM-M received partial funding from the Polytechnic University of Valencia (PAID-10-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifocal diffractive lenses based on the aperiodic Kolakoski sequence

  • Garmendía-Martínez, Adrián|||0000-0003-3443-5144
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael
  • Furlan, Walter Daniel
[EN] In this work, we present a new family of Zone Plates (ZPs) designed using the self-generating Kolakoski sequence. The focusing and imaging properties of these aperiodic difractive lenses coined Kolakoski Zone Plates (KZPs) are extensively studied. It is shown that under monochromatic planewave illumination, a KZP produces two main foci of the same intensity along the axial axis. Moreover, one of the corresponding focal lengths is double the other, property correlated with the involved aperiodic sequence. This distinctive optical characteristic is experimentally confrmed. We have also obtained the frst images provided by these bifocal new difractive lenses., Tis work was supported by the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and by Generalitat Valenciana (grant CIPROM/2022/30), Spain. A.G.M acknowledges the fnancial support from rom the Generalitat Valenciana (GRISOLIAP/2021/121), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Faba bean protein films reinforced with cellulose nanocrystals as edible food packaging material

  • Rojas-Lema, Sandra
  • Nilsson, Klara
  • Trifol, Jon
  • Langton, Maud
  • Moriana, Rosana
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] In the present work, transparent films were obtained by the solution casting method from faba bean protein isolate (FBP), reinforced with different cellulose nanocrystals (CNCs) content (1, 3, 5 and 7 wt%), obtained by acid hydrolysis of pine cone, and using glycerol as plasticizer. The influence of different CNCs loadings on the mechanical, thermal, barrier, optical, and morphological properties was discussed. Microstructurally, the FTIR and FESEM results corroborated the formation of intramolecular interactions between the CNCs and proteins that lead to more compact and homogeneous films. These interactions had a positive influence on the mechanical strength properties, which is reflected in higher tensile strength and Young's modulus in reinforced films with respect to the control film, resulting in stiffer films as the CNCs content increases. Thermal stability of the FBP films was also improved with the presence of CNCs, by increasing the characteristic onset degradation temperature. In addition, the linkages formed between the CNCs, and proteins reduced the water affinity of the reinforced films, leading to a reduction in their moisture content and water solubility, and an increase in their water contact angle, obtaining more hydrophobic films as the CNCs content in the matrix increased. The addition of CNCs in the FBP film also considerably improved its barrier properties, reducing its water vapour transmission rate (WVTR) and oxygen transmission rate (OTR). The present work shows the possibility of obtaining biobased and biodegradable films of CNC-reinforced FBP with improved mechanical, thermal and barrier properties, and low water susceptibility, which can be of great interest in the food packaging sector as edible food packaging material., This research was supported by the Ministry of Science and Inno-vation (MICI) [MAT2017-84909-C2-2-R] . S. Rojas-Lema thanks the Generalitat Valenciana (GVA) for the financial support through a San-tiago Grisolia grant (GRISOLIAP/2019/132) . D. Garcia-Garcia wants to thank the Ministry of Science, Innovation and Universities for their financial support through the "Jose Castillejo" mobility grant (CAS19/00332).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adjusting the Crystallization of Tin Perovskites through Thiophene Additives for Improved Photovoltaic Stability

  • Solis, Omar E.
  • Mínguez-Avellán, Miriam
  • Betancur, Pablo F.
  • Sánchez-Alarcón, Raul I.
  • Martínez-Pastor, Juan P.
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Tin-based perovskites (Sn-PVK) are promising lead-free alternatives for efficient photovoltaic technology, but they face challenges related to bulk and surface defects due to suboptimal crystallization and Sn2+ oxidation. Introducing thiophene-2-ethylammonium halides (TEAX, where X = I, Br, Cl) improves FASnI3 crystallization and reduces Sn4+ formation. This is achieved by adjusting the crystallization dynamics through the formation of a complex between S and Sn during the preparation of the precursor solution, which also inhibits Sn2+ oxidation in the resulting films. In solar cells, these additives boost power conversion efficiency (PCE) from 6.6% (without additives) to 9.4% (using TEABr), with further enhancement to 12% by adjusting selective contacts. The addition of TEAX also increases the Sn2+ content, outperforming control. Devices with TEABr maintained over 95% of their initial PCE after 2000 h in N2 under continuous operation with 1 sun simulated illumination., This work was made possible by the SANTIAGO GRISOLIAprogram of the Valencian Community of Spain under theproject GRISOLIAP/2021/112. We acknowledge the supportof the Spanish MINECO through the project Nirvana (no.PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial supportof Generalitat Valenciana through the CIDEGENT contracts(ref: CIDEGENT/2021/044 and CIDEXG/2022/34), CIA-POS 2022/018 grant. The work was partially funded byMCIN/AEI through project TED2021-131600B-C32 andgrant CNS2023-144270 funded by MCIN/AEI/ 10.13039/501100011033 by European Union NextGenerationEU/PRTR . Financial support by the Spanish Ministry of Scienceand Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Search for quantum decoherence in neutrino oscillations with six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A.R.
  • Alshamsi, M.
  • Garre, S. Alves
  • Ambrosone, A.
  • Ameli, F.
  • André, F.M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Baret, B.
  • Bariego-Quintana, A.
  • Becherini, Y.
  • Bendahman, M.
  • Biagi, S.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] Neutrinos described as an open quantum system may interact with the environment which introduces stochastic perturbations to their quantum phase. This mechanism leads to a loss of coherence along the propagation of the neutrino - a phenomenon commonly referred to as decoherence - and ultimately, to a modification of the oscillation probabilities. Fluctuations in space-time, as envisaged by various theories of quantum gravity, are a potential candidate for a decoherence-inducing environment. Consequently, the search for decoherence provides a rare opportunity to investigate quantum gravitational effects which are usually beyond the reach of current experiments. In this work, quantum decoherence effects are searched for in neutrino data collected by the KM3NeT/ORCA detector from January 2020 to November 2021. The analysis focuses on atmospheric neutrinos within the energy range of a few GeV to 100 GeV. Adopting the open quantum system framework, decoherence is described in a phenomenological manner with the strength of the effect given by the parameters Gamma(21) and Gamma(31). Following previous studies, a dependence of the type Gamma(ij) alpha (E/E-0)(n) on the neutrino energy is assumed and the cases n = -2,-1 are explored. No significant deviation with respect to the standard oscillation hypothesis is observed. Therefore, 90% CL upper limits are estimated as Gamma(21) < 4.6 center dot 10(-21) GeV and Gamma(31) < 8.4 center dot 10(-21) GeV for n = -2 and Gamma(21) < 1.9 center dot 10(-22) GeV and Gamma 31 < 2.7 center dot 10(-22) GeV for n = -1, respectively., The authors thank Kristina Giesel for fruitful discussions about the interpretation of different quantum decoherence models. The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union -NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union -NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Ultrasound Pre-Treatment for Enhancing Extraction of Bioactive Compounds from Rice Straw

  • Vieira-De Freitas, Pedro Augusto
  • González Martínez, María Consuelo|||0000-0001-9993-8303
  • Chiralt, Amparo|||0000-0003-1134-8144
[EN] The extraction of water-soluble bioactive compounds using different green methods is an eco-friendly alternative for valorizing agricultural wastes such as rice straw (RS). In this study, aqueous extracts of RS (particles < 500 mu m) were obtained using ultrasound (US), reflux heating (HT), stirring (ST) and a combination of US and ST (USST) or HT (USHT). The extraction kinetics was well fitted to a pseudo-second order model. As regards phenolic compound yield, the US method (342 mg gallic acid (GAE). 100 g(-1) RS) was more effective than the ST treatment (256 mg GAE center dot 100 g(-1) RS), reaching an asymptotic value after 30 min of process. When combined with HT (USHT), the US pre-treatment led to the highest extraction of phenolic compounds from RS (486 mg GAE center dot 100 g(-1) RS) while the extract exhibited the greatest antioxidant activity. Furthermore, the USHT extract reduced the initial counts of Listeria innocua by 1.7 logarithmic cycles. Therefore, the thermal aqueous extraction of RS applying the 30 min US pre-treatment, represents a green and efficient approach to obtain bioactive extracts for food applications., Author P.A.V.F. is grateful to Generalitat Valenciana for the GrisoliaP/2019/115 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined search for neutrinos from dark matter self-annihilation in the Galactic Center with ANTARES and IceCube

  • Albert, A.
  • Andre, M.
  • Anghinolfi, M.
  • Aubert, J-J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bertin, V.
  • Biagi, S.
  • Bissinger, M.
  • Boumaaza, J.
  • Bouta, M.
  • Bouwheis, M. C.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
[EN] We present the results of the first combined dark matter search targeting the Galactic Center using the ANTARES and IceCube neutrino telescopes. For dark matter particles with masses from 50 to 1000 GeV, the sensitivities on the self-annihilation cross section set by ANTARES and IceCube are comparable, making this mass range particularly interesting for a joint analysis. Dark matter self-annihilation through the ¿+¿¿, ¿+¿¿, b¯b, and W+W¿ channels is considered for both the Navarro-Frenk-White and Burkert halo profiles. In the combination of 2101.6 days of ANTARES data and 1007 days of IceCube data, no excess over the expected background is observed. Limits on the thermally averaged dark matter annihilation cross section h¿A¿i are set. These limits present an improvement of up to a factor of 2 in the studied dark matter mass range with respect to the individual limits published by both collaborations. When considering dark matter particles with a mass of 200 GeV annihilating through the ¿þ¿¿ channel, the value obtained for the limit is 7.44 × 10¿24 cm3 s¿1 for the Navarro-Frenk-White halo profile. For the purpose of this joint analysis, the model parameters and the likelihood are unified, providing a benchmark for forthcoming dark matter searches performed by neutrino telescopes., The authors from the ANTARES Collaboration acknowledge the financial support of the following funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et auxenergies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), IdEx program and UnivEarthS Labex program at Sorbonne Paris Cite (ANR-10-LABX-0023 and ANR-11IDEX-0005-02), Labex OCEVU (ANR-11-LABX-0060) and the A*MIDEX project (ANR-11-IDEX-0001-02), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR), Generalitat Valenciana: Grisolia (ref. GRISOLIA/2018/119), Spain; Ministry of Higher Education, Scientific Research and Professional Training, Morocco. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and CC-IN2P3 for the computing facilities. The authors from the IceCube Collaboration gratefully acknowledge the support from the following agencies and institutions: USA-U.S. National Science Foundation-Office of Polar Programs, U.S. National Science Foundation-Physics Division, Wisconsin Alumni Research Foundation, Center for High Throughput Computing (CHTC) at the University of Wisconsin-Madison, Open Science Grid (OSG), Extreme Science and Engineering Discovery Environment (XSEDE), U.S. Department of Energy-National Energy Research Scientific Computing Center, Particle astrophysics research computing center at the University of Maryland, Institute for Cyber-Enabled Research at Michigan State University, and Astroparticle physics computational facility at Marquette University; Belgium-Funds for Scientific Research (FRS-FNRS and FWO), FWO Odysseus and Big Science programmes, and Belgian Federal Science Policy Office (Belspo); Germany-Bundesministerium fur Bildung und Forschung (BMBF), Deutsche Forschungsgemeinschaft (DFG), Helmholtz Alliance for Astroparticle Physics (HAP), Initiative and Networking Fund of the Helmholtz Association, Germany-Deutsches Elektronen Synchrotron (DESY), and High Performance Computing cluster of the RWTH Aachen; Sweden-Swedish Research Council, Swedish Polar Research Secretariat, Swedish National Infrastructure for Computing (SNIC), and Knut and Alice Wallenberg Foundation; Australia-Australian Research Council; Canada-Natural Sciences and Engineering Research Council of Canada, Calcul Quebec, Compute Ontario, Canada Foundation for Innovation, WestGrid, and Compute Canada; Denmark-Villum Fonden, Danish National Research Foundation (DNRF), Carlsberg Foundation; New Zealand-Marsden Fund; Japan-Japan Society for Promotion of Science (JSPS) and Institute for Global Prominent Research (IGPR) of Chiba University; Korea-National Research Foundation of Korea (NRF); Switzerland-Swiss National Science Foundation (SNSF); United Kingdom-Department of Physics, University of Oxford. The IceCube collaboration acknowledges the significant contributions to this manuscript from Sebastian Baur, Nadege Iovine and Sara Rebecca Gozzini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the linking bridge on the photoreactivity of benzophenone-thymine conjugates

  • Blasco-Brusola, Alejandro
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Miranda Alonso, Miguel Ángel
[EN] Benzophenone (BP) is present in a variety of bioactive molecules. This chromophore is able to photosensitize DNA damage, where one of the most relevant BP/ DNA interactions occurs with thymine (Thy). In view of the complex photoreactivity previously observed for dyads containing BP covalently linked to thymidine, the aim of this work is to investigate whether appropriate changes in the nature of the spacer could modulate the intramolecular BP/Thy photoreactivity, resulting in an enhanced selectivity. Accordingly, the photobehavior of a series of dyads derived from BP and Thy, separated by linear linkers of different length, has been investigated by steady-state photolysis, as well as femtosecond and nanosecond transient absorption spectroscopy. Irradiation of the dyads led to photoproducts arising from formal hydrogen abstraction or Paterno-Buchi (PB) photoreaction, with a chemoselectivity that was clearly dependent on the nature of the linking bridge; moreover, the PB process occurred with complete regio- and stereoselectivity. The overall photoreactivity increased with the length of the spacer and correlated well with the rate constants estimated from the BP triplet lifetimes. A reaction mechanism explaining these results is proposed, where the key features are the strain associated with the reactive conformations and the participation of triplet exciplexes., Financial support from the Spanish Government (RYC-2015-17737 and CTQ2017-89416-R) and from the Conselleria d'Educació Cultura i Esport (PROMETEO/2017/075 and GRISOLIAP/2017/005) is gratefully acknowledged. The authors would like to thank the use of RIAIDT-USC analytical facilities for the X-ray crystallography analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity to light sterile neutrino mixing parameters with KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alshamsi, M.
  • Alves Garre, S.
  • Aly, Z.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Anton, G.
  • Aublin, J.
  • Bou Cabo, M.
  • Diego-Tortosa, D.
  • García Méndez, J.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] KM3NeT/ORCA is a next-generation neutrino telescope optimised for atmospheric neutrino oscillations studies. In this paper, the sensitivity of ORCA to the presence of a light sterile neutrino in a 3+1 model is presented. After three years of data taking, ORCA will be able to probe the active-sterile mixing angles ¿¿¿, ¿¿¿, ¿¿¿ and the effective angle ¿µ¿, over a broad range of mass squared difference ¿m² ~ [10¿5, 10] eV2, allowing to test the eV-mass sterile neutrino hypothesis as the origin of short baseline anomalies, as well as probing the hypothesis of a very light sterile neutrino, not yet constrained by cosmology. ORCA will be able to explore a relevant fraction of the parameter space not yet reached by present measurements., The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education Scientific Research and Professional Training, ICTP through Grant AF-13, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (ref. GRISOLIA/2018/119) and GenT (refs. CIDEGENT/2018/034,/2019/043,/2020/049) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Piecewise-Takagi-Sugeno asymptotically exact estimation of the domain of attraction of nonlinear systems

  • Gonzalez-German, Ivan Temoatzin
  • Bernal Reza, Miguel Ángel
  • Robles-Ruiz, Ruben
  • Sala, Antonio|||0000-0002-5691-8772
[EN] This report generalises recent results on stability analysis and estimation of the domain of attraction of nonlinear systems via exact piecewise affine Takagi Sugeno models. Algorithms in the form of linear matrix inequalities are proposed that produce progressively better estimates which are proved to asymptotically render the actual domain of attraction; regions already proven to belong to such domain of attraction can be removed and the estimate can contain significant portions of the modelling region boundary; in this way, level-set approaches in prior literature can be significantly improved. Illustrative examples and comparisons are provided. (C) 2016 The Franklin Institute. Published by Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the support of the following institutions: Project Ciencia Basica SEP-CONACYT CB-168406, the CONACyT/COECYT Sonora scholarship 383252, project DPI2016-81002-R (Spanish government, MINECO), and the scholarship GRISOLIA/2014/006 from Generalitat Valenciana (regional government).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forecasts for full decarbonization of the economy in off-grid systems with high end-use consumption rates through combined electricity and hydrogen deployment, the Canary Islands in 2040

  • Rivera-Durán, Yago
  • Córdova, Yaisel
  • Berna-Escriche, César|||0000-0002-2097-5089
  • Álvarez-Piñeiro, Lucas|||0000-0002-9450-2479
  • Blanco-Muelas, David|||0000-0003-2958-0558
[EN] This article explores the complete decarbonization of the Canary Archipelago's economy. The proposed scenario uses electric and hydrogen energy vectors to meet all final energy demands at affordable costs. The study considers the technical and economic aspects of the proposed system, as well as an estimation of electricity generation and hydrogen production capacity in 2040, to optimize the system to meet the demand at all times without relying on external sources. The recommended scenario involves the deployment of 7500 MWp of photovoltaic energy, 1076 MWp of wind turbines, and 907 MW of SMRs. Various storage options have been tested to accommodate the unavoidable storage requirements of such stand-alone systems. The selection of reverse-pumping storage with a maximum power output of 2050 MW and a total capacity of approximately 17GWh is sufficient to cover the existing system needs. The total investment required to implement the proposed system until 2040 is estimated at around 29,000 M€, of which approximately 6000 are for the hydrogen subsystem. The proposed system entails significantly less storage capacity and curtailment while enabling the production of sufficient hydrogen to achieve the complete decarbonization of all energy end-uses., The authors would like to express their gratitude to the Generalitat Valenciana (Spain) for its support under the Santiago Grisolía Program/2018/140. The authors would also like to extend their gratitude to the Ministerio de Economía, Industria y Competitividad and by Agencia Nacional de Investigacion ¿ under the FPI grant BES-2017-080031.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Different Compatibilization Strategies to Improve the Performance of Injection-Molded Green Composite Pieces Made of Polylactide Reinforced with Short Flaxseed Fibers

  • Agüero, Ángel
  • Rojas-Lema, Sandra Paola
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Green composites made of polylactide (PLA) and short flaxseed fibers (FFs) at 20 wt % were successfully compounded by twin-screw extrusion (TSE) and subsequently shaped into pieces by injection molding. The linen waste derived FFs were subjected to an alkalization pretreatment to remove impurities, improve the fiber surface quality, and make the fibers more hydrophobic. The alkali-pretreated FFs successfully reinforced PLA, leading to green composite pieces with higher mechanical strength. However, the pieces also showed lower ductility and toughness and the lignocellulosic fibers easily detached during fracture due to the absence or low interfacial adhesion with the biopolyester matrix. Therefore, four different compatibilization strategies were carried out to enhance the fiber-matrix interfacial adhesion. These routes consisted on the silanization of the alkalized FFs with a glycidyl silane, namely (3-glycidyloxypropyl) trimethoxysilane (GPTMS), and the reactive extrusion (REX) with three compatibilizers, namely a multi-functional epoxy-based styrene-acrylic oligomer (ESAO), a random copolymer of poly(styrene-co-glycidyl methacrylate) (PS-co-GMA), and maleinized linseed oil (MLO). The results showed that all the here-tested compatibilizers improved mechanical strength, ductility, and toughness as well as the thermal stability and thermomechanical properties of the green composite pieces. The highest interfacial adhesion was observed in the green composite pieces containing the silanized fibers. Interestingly, PS-co-GMA and, more intensely, ESAO yielded the pieces with the highest mechanical performance due to the higher reactivity of these additives with both composite components and their chain-extension action, whereas MLO led to the most ductile pieces due to its secondary role as plasticizer for PLA., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. D.L. and J.I.-M. thanks UPV for the grant received through the PAID-01-18 and PAID-01-19 (SP2019001) programs, respectively. S.T.-G. is recipient of a Juan de la Cierva contract (IJCI-2016-29675) from MICIU while S.R.J. is funded through the Santiago Gisolía contract (GRISOLIAP/2019/132) from Generalitat Valenciana (GVA). The microscopy services of UPV are also acknowledged for their help in collecting and analyzing the FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

AI*LoRa: Enabling Efficient Long-Range Communication with Machine Learning at the Edge

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Pietrosemoli, Ermanno
  • Zennaro, Marco
[EN] Efficient long-range communication is critical for environmental monitoring, especially when dealing with large data transfers in remote areas. We present an AI-driven dynamic RF configuration mode, which combines the advanced capabilities of a novel AI*LoRa model with an enhanced RF configuration request mechanism. By leveraging TinyML, AI*LoRa dynamically adjusts key parameters of the physical layer, based on real-time environmental data, ensuring robust and energy-efficient communication. We conducted extensive real-world testing across distances ranging from a few meters to over 100 kilometers to collect the dataset necessary for training our model. The results demonstrate that our approach achieved over 90% accuracy in predicting optimal settings, leading to an average improvement of over 170% in communication efficiency. These findings underscore AI*LoRa's significant potential to enhance long-range IoT deployments., This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387 and SMARTLAGOON grant No 101017861, by project Ramón y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021-130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Instalación Experimental de Chorros de Mezcla de Vapor y Gases Incondensables

  • Córdova, Y.
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • Escrivá, A.|||0000-0002-9670-068X
  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
[ES] La descarga de vapor en forma de chorro en piscinas con agua subenfriada es una forma muy eficiente de condesar vapor y se ha utilizado ampliamente en la industria ya que permite una rápida condensación del vapor al ofrecer una alta transferencia de calor y capacidad de intercambio de masa. Muchos experimentos de jet en piscina se han ido desarrollando desde hace décadas, aportando información de interés en el campo en que tratamos. Se sigue trabajando para obtener un rango de información más amplio, considerando mayor número de variables y parámetros, obteniendo correlaciones cada vez más precisas en las que se tiene en cuenta más diversidad de escenarios. Se ha desarrollado una instalación para llevar a cabo el estudio del jet horizontal en una piscina en la que se pueden realizar pruebas con una amplia variedad de situaciones, permitiendo el estudio del jet de aire, vapor y la mezcla de ambos gases, combinando distintas presiones, temperaturas y porcentaje de mezcla, entre otras variables de interés. Se realizan distintas pruebas obteniendo capturas de imágenes, con una cámara de alta de velocidad, mediante las cuales se puede realizar un tratamiento de datos, pudiendo obtener trayectorias, longitud de penetración y distintos patrones que ayuden a entender la fenomenología que se produce en la descarga en la piscina. La instalación consta de una instrumentación adecuada para realizar las medidas oportunas en rangos de error asumibles, con la intención de obtener resultados con la máxima precisión posible., Los autores del trabajo desean agradecer la financiación recibida del programa Santiago Grisolía.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Search for neutrino emission from GRB 221009A using the KM3NeT ARCA and ORCA detectors

  • Aiello, S.
  • Albert, A.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androutsou, E.
  • Anguita, M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Campion, S.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino events. In this paper, we summarize subsequent searches, in a wide energy range from MeV up to a few PeVs. No neutrino events are found in any of the searches performed. Upper limits on the neutrino emission associated with GRB 221009A are computed., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union -NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant "AstroCeNT: Particle Astrophysics Science and Technology Centre", carried out within the International Research Agendas programme of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union -NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23, for CIDEIG/2023/20 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

KM3NeT front-end and readout electronics system: hardware, firmware, and software

  • Aiello, S.
  • Ameli, F.
  • Andre, M.
  • Androulakis, Giorgos
  • Anghinolfi, M.
  • Anton, G.
  • Aublin, J.
  • Bagatelas, C.
  • Barbarino, G.
  • Baret, B.
  • Basegmez du Pree, Suzan
  • Belias, Anastasios
  • Bendahman, Meriem
  • Berbee, Edward
  • van den Berg, Ad M.
  • Bertin, Vincent
  • Diego-Tortosa, D.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
[EN] The KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-in. photomultiplier tubes, instrumentation for calibration of the photomultiplier signal and positioning of the optical module, and all associated electronics boards. By design, the total electrical power consumption of an optical module has been capped at seven Watts. We present an overview of the front-end and readout electronics system inside the optical module, which has been designed for a 1-ns synchronization between the clocks of all optical modules in the grid during a life time of at least 20 years., The authors acknowledge financial support from the funding agencies: Agence Nationale de la Recherche (Grant No. ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), IdEx program and UnivEarthS Labex program at Sorbonne Paris Cite (Grant Nos. ANR-10-LABX-0023 and ANR-11-IDEX-0005-02), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, Grant No. FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Istruzione, dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education, Scientific Research and Professional Training, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Plan Estatal de Investigacion [refs. FPA2015-65150-C3-1-P, -2-P and -3-P, (MINECO/FEDER)], Severo Ochoa Centre of Excellence program (MINECO), Red Consolider MultiDark (ref. FPA2017-90566-REDC, MINECO), and Prometeo and Grisolia programs (Generalitat Valenciana), "la Caixa" Foundation (ID 100010434) through the fellowship LCF/BQ/IN17/11620019, and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 713673, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Analysis of the combustion process and soot formation in a single cylinder optical engine fueled with e-fuels and using different piston geometries

  • Vargas Lewiski, Felipe de
[ES] La reducción de emisiones en motores de combustión interna (MCI) es uno de los mayores desafíos técnicos de la sociedad. Aunque están surgiendo nuevas tecnologías para la movilidad, el ICE seguirá teniendo un papel clave en el transporte durante las próximas décadas. Los motores diesel son un desafío en términos de emisiones contaminantes, en particular óxidos de nitrógeno (NOX) y hollín. De hecho, el último representa el 50 % de las emisiones totales de este tipo de motores. En este contexto, las nuevas tecnologías de hardware y los nuevos combustibles renovables han mostrado un gran potencial para reducir las emisiones de hollín sin afectar la eficiencia del motor (emisiones de CO2). Por esta razón, los impactos del uso de e-fuels (OMEX y FT diesel) y diferentes geometrías del bowl del pistón (reentrante, labio escalonado y labio escalonado con ondas) en la formación de hollín y el desarrollo de la combustión han sido analizados en un motor óptico mono cilíndrico diesel. Primero, se realizó una caracterización del flujo en el cilindro utilizando un pistón de geometría real (Reentrante) y aplicando la técnica de velocímetro de imágenes por partículas (PIV). Posteriormente, se analizó el movimiento de la llama, el proceso de combustión y la formación de hollín para diferentes geometrías de pistón mediante diversas técnicas ópticas como la velocímetro de imagen por combustión (CIV), luminosidad natural, quimioluminiscencia OH * y pirometría de 2 colores. Finalmente, se estudió el proceso de combustión y la formación de hollín al utilizar diferentes e-fuels aplicando las mismas técnicas ópticas utilizadas anteriormente. Además, para esta parte del estudio, se incluyó una técnica óptica específica denominada espectroscopia de alta velocidad para el análisis de hollín. Con respecto a la evaluación de las distintas geometrías del bowl, el labio escalonado y el labio escalonado con ondas presentaron una oxidación tardía del hollín que ha sido más rápida en comparación con la geometría reentrante. En condiciones extremas de hollín, también se observaron diferencias entre el labio escalonado y el labio escalonado con ondas. Se observó una oxidación más rápida del hollín para el segundo. Los e-fuels mostraron una notable reducción en la formación de hollín (especialmente OMEX) en comparación con el diesel fósil. A partir del análisis de espectroscopia, es posible afirmar la ausencia de hollín durante la combustión de OMEX puro. En general, tanto la aplicación de nuevos hardware (geometrías de bowls) como nuevos tipos de combustibles (e-fuels) en motores diesel han presentado un gran potencial para disminuir las emisiones de hollín, [CA] La reducció d'emissions en motors de combustió interna (MCI) es un dels majors reptes tècnics de la societat. Encara que estan sorgint noves tecnologies per a la mobilitat, el ICE seguirà tenint un paper clau en el transport durant les pròximes dècades. Els motors diesel son un dels reptes en termes d'emissió de contaminants, en particular òxids de nitrogen (NOX) i sutge. De fet, l'últim representa el 50% de les emissions totals d'aquest tipus de motor. Dins aquest context, les noves tecnologies de hardware y de nous combustibles renovables han mostrat un gran potencial per reduir les emissions de sutge sense afectar l'eficiència del motor (emissions de CO2). Per aquesta raó, els impactes sobre l'ús de e-fuels (OMEX i FT-diesel) i diferents geometries de bowl del pistó (re-entrant, llavi escalonat i llavi escalonat amb ones) en la formació de sutge i el desenvolupament de la combustió, han estat analitzats en un motor òptic mono-cilíndric diesel. Primer, es va realitzar una caracterització de flux en el cilindre utilitzant un pistó amb geometria real (re-entrant) i aplicant la tècnica de velocimetria de imatges per partícules (PIV). Posteriorment, es va analitzar el moviment de la flama, el procés de combustió i la formació de sutge per a diferents geometries de pistó mitjançant diverses tècniques òptiques com per exemple la de velocimetria de imatge per combustió (CIV), lluminositat natural, quimioluminescència de OH* i pirometria de 2 colors. Finalment, es va estudiar el procés de combustió i la formació de sutge utilitzant diferents e-fuels aplicant les mateixes tècniques òptiques utilitzades anteriorment. A més, per aquesta part de l'estudi, es va implementar una tècnica òptica específica denominada espectroscòpia d'alta velocitat per a l'anàlisi del sutge. Respecte a l'avaluació de les distintes geometries de bowl, els llavis escalonats i els escalonats amb ones presentaren una oxidació tardana del sutge que ha estat més ràpida en comparació amb la de geometria re-entrant. En condicions extremes de sutge, també es varen observar diferencies entre la geometria de llavi escalonat y la de llavi escalonat amb ones. Es va observar una oxidació més ràpida del sutge per al segon. Els e-fuels mostraren una reducció més ràpida del sutge (especialment l'OMEX) en comparació amb el diesel fòssil. A partir de l'anàlisi d'espectroscòpia, es possible afirmar l'absència de sutge durant la combustió de l'OMEX pur. En general, tant l'aplicació de nous hardwares (geometries de bowl) com nous tipus de combustibles (e-fuels) en motors diesel han presentat un gran potencial per a la reducció d'emissions de sutge., [EN] The emissions reduction in internal combustion engines (ICE) is one of the greatest technical challenges of society. Although new technologies for mobility are emerging, the ICE will still have a key role in transport over the next decades. Diesel engines are challenging in terms of pollutant emissions, in particular nitrogen oxides (NOX) and particles. In fact, the last one represents 50 % of total emissions of this kind of engine. In this context, new hardware technologies as well as new renewable fuels have shown great potential to reduce soot emissions without affecting engine efficiency (CO2) emissions. For this reason, the impacts of using e-fuels (OMEX and FT-diesel) and different piston bowl geometries (re-entrant, stepped lip and stepped lip-wave bowl) on soot formation and combustion development were analyzed in a single cylinder optical diesel engine. First, an in-cylinder flow characterization when using a real bowl shape was performed by applying particle image velocimetry (PIV) technique. Subsequently, the flame movement, combustion process and soot formation were analyzed for different piston geometries through several optical techniques such as combustion image velocimetry (CIV), natural luminosity, OH* chemiluminescence and 2 color pyrometry. Finally, the combustion process and soot formation when using different e-fuels were studied by applying the same optical techniques used previously. In addition, for this part of the study, it was included a specific optical technique named high-speed spectroscopy for the soot analysis. Regarding the bowl geometries evaluation, the stepped lip and wave-stepped lip presented a faster late soot oxidation in comparison with the re-entrant geometry. Under extreme soot conditions, differences were also observed between the wave-stepped lip and the stepped lip. A faster soot oxidation was observed for the first one. The e-fuels showed a remarkable reduction in soot formation (especially OMEX) when compared with fossil diesel. From the spectroscopy analysis, it is possible to state the absence of soot during the combustion of pure OMEX. In general, the application of new hardware (bowl geometries) as well as new kind of fuels in diesel engines have presented a great potential in order to diminish the soot emissions., This work was partially funded by Generalitat Valenciana through the Programa Santiago Grisolía (GRISOLIAP/2018/142) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the inflammatory responses to sol-gel coatings with distinct biocompatibility levels

  • Cerqueira, Andreia
  • Araújo-Gomes, Nuno
  • Zhang, Yang
  • van den Beucken, Jeroen J. J. P.
  • Ozturan, Seda
  • Izquierdo, Raúl
  • Muriach, Maria
  • Romero-Cano, Ricard
  • Baliño, Pablo
  • Romero-Gavilán, Francisco J.
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] The immune system plays a crucial role in determining the implantation outcome, and macrophages are in the frontline of the inflammatory processes. Further, cellular oxidative stress resulting from the material recognition can influence how cell responses develop. Considering this, the aim of this study was to study oxidative stress and macrophages phenotypes in response to sol-gel materials with distinct in vivo outcomes. Four materials were selected (70M30T and 35M35G30T, with high biocompatibility, and 50M50G and 50V50G, with low biocompatibility). Gene expression, immunocytochemistry and cytokine secretion profiles for M1 and M2 markers were determined. Moreover, oxidative stress markers were studied. Immunocytochemistry and ELISA showed that 50M50G and 50V50G lead to a higher differentiation to M1 phenotype, while 70M30T and 35M35G30T promoted M2 differentiation. In oxidative stress, no differences were found. These results show that the balance between M1 and M2, more than individual quantification of each phenotype, determines a biomaterial outcome., Generalitat Valenciana, Grant/Award Number: GRISOLIAP/2018/091; Ministerio de Economia y Competitividad, Grant/Award Numbers: MAT2017-86043-R, RTC2017-6147-1; Universitat Jaume I, Grant/Award Number: POSDOC/2019/28
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Disruption of MCL1/BOK transmembrane interaction as a novel strategy to induce cell death in tumours

  • Buffa, M.
  • Leiva, D.
  • García-Jareño, A.
  • Garcés-Flores, M.
  • Díaz, E.
  • Lucantoni, F.
  • Telechea, M.
  • Chen, L.
  • Lucendo, E.
  • Shalaby, R.
  • Lolicato, F.
  • Kulig, W.
  • García-Sáez, A.J.
  • Moreno-Bueno, G.
  • Sancho, M.
  • Orzáez-Calatayud, Mar
[EN] MCL1, an anti-apoptotic BCL-2 family member, is frequently overexpressed in multiple tumour types and correlates with poor prognosis; however, targeting its cytosolic domain to release pro-apoptotic effectors has been limited by cardiotoxicity in clinical trials. In this study, we describe a chemically mediated disruption of the MCL1/BOK transmembrane interaction that induces tumour cell death without affecting viability in 3D cardiomyocyte cultures. Molecular dynamics simulations and LUV-based assays converged to show that the MBoIN179 disrupts transmembrane dimerization, thereby restoring BOK pore formation inhibited by MCL1. In cells, interference with the MCL1/BOK transmembrane interaction promoted relocalization of BOK from the endoplasmic reticulum to mitochondria, where it engaged a BOK-dependent cell death program in both 2D and 3D breast cancer models, leading to reduced tumour growth and metastasis in vivo. Analysis of patient tumour microarrays further showed that BOK is overexpressed in aggressive breast cancer subtypes and correlates with poor prognosis. Together, these findings identify the MCL1/BOK transmembrane interaction as a tumour-selective vulnerability that can be engaged to promote antitumour responses with cardiac safety, highlighting transmembrane interactions as viable molecular targets., These results are part of the project PID2023-148234NB-I00, funded by MCIU/AEI/ 10.13039/501100011033 and ERDF/EU, project PT23/00177, funded by Instituto de Salud Carlos III (ISCIII) and co-funded by the European Union, and the project CIPROM/2022/62, funded by the Department of Education, Culture, Universities and Employment of the Generalitat Valenciana (PROMETEO). A part of the work was also supported by grants from the Spanish Ministry of Economy and Innovation (PID2019- 104644RB-I00 -GMB-) and the Instituto de Salud Carlos III (CIBERONC, CB16/12/00295 -GMB). MB is funded by a predoctoral fellowship (GRISOLIAP/2021/132) from Generalitat Valenciana and by an EMBO Scientific Exchange Grant (11082) for a research stay in the laboratory of Ana García-Sáez. DL is funded by a predoctoral fellowship (PRDVA21475LEIV) from the Spanish Cancer Association (AECC). RS and AGS are partially funded by the Deutsche Forschungsgemeinschaft (CRC1403, project 414786233; TRR353, project 471011418). This work is also supported by grants of the Deutsche Forschungsgemeinschaft (DFG) to FL (SFB-1638/1 511488495 - Z01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Characterization of the Dimensionless Momentum Length for Submerged Jet Discharges of Air-Steam Mixtures into Stagnant Water

  • Y. Córdova
  • Rivera-Durán, Yago
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Escrivá, A.|||0000-0002-9670-068X
[EN] A very efficient method of condensing the steam in various industrial applications is the steam direct discharge into pools with subcooled water. This kind of condensation is known as Direct Contact Condensation (DCC), by providing high heat transfer and mass exchange capacity, the steam condenses quickly. In the past few decades, many experiments have been carried out on the submerged jets of non-condensable gases and pure steam in pools, supplying much information of interest, but efforts are still being made to obtain more information. In particular, the research of steam and non-condensable gas mixtures is of great interest to the chemical, energy, and nuclear industry. Consequently, this study investigates the discharge behavior of air-steam mixtures in a pool with subcooled water by direct visualization techniques using a high-speed camera. To know the behavior of the dimensionless momentum length, tests were carried out considering several initial discharge conditions such as nozzle diameter, percentage of mixture, and flow rates. After image acquisition, a series of complex processing, filtering, and post-processing procedures are applied using a subroutine in MATLAB. The momentum length of the jet was measured and found to be heavily influenced by the nozzle diameter, the jet velocity, and the mixture percentage. A correlation is obtained for the dimensionless momentum length of the horizontal jet that depends on the Froude and Mach numbers., The authors would like to acknowledge the support provided through the Spanish project EXMOTRANSIN ENE2016-79489-C2-1-P and the Santiago Grisolía Program for the training of research personnel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Mixture Separations with Zeolites: Molecular View on Adsorptive Processes

  • Misturini, Alechania
[ES] Los métodos de química computacional se han empleado en el estudio de materiales de zeolita aplicados a procesos de separación. Se consideró un enfoque clásico, donde los campos de fuerza se seleccionaron durante los procedimientos de benchmark entre los modelos actualmente disponibles. Los resultados obtenidos han sido validados considerando datos experimentales y se mejoró la descripción de los modelos, cuando fue posible, mediante procedimientos de parametrización. Así, los mejores modelos describieron sistemas con diferentes grados de complejidad, que fueron simulados a través de los métodos de Dinámica Molecular y Monte Carlo. La difusión y la adsorción en los microporos (bulk) y en la superficie externa de las zeolitas se pueden entender a nivel molecular. Se calculó la energía de adsorción y también se descompuso su magnitud en las contribuciones electrostática y de van der Waals. Además, fue posible observar más de cerca las interacciones anfitrión-invitado e invitado-invitado durante las trayectorias simuladas. Considerando la creciente demanda energética a nivel mundial, los biocombustibles se consideran una opción sostenible obtenida a partir de biomasa. Se han simulado con éxito los pasos del proceso experimental desarrollado por Denayer et al. para la recuperación de biobutanol a partir de una mezcla fermentada. Se modelaron los ciclos de adsorción y desorción en dos columnas zeolíticas con selectividad complementaria (tipo LTA y CHA), con sistemas de nanoláminas y considerando las principales características experimentales. Aunque las escalas de tiempo experimentales son inalcanzables para los recursos computacionales disponibles actualmente, los sistemas simulados pudieron capturar los fenómenos experimentales y fueron evaluados más a fondo a través del comportamiento microscópico de los sistemas. Un estudio experimental y computacional señaló la STW sílice pura (Si-STW) como un candidato prometedor para la separación de alcanos lineales, monoramificados y diramificados. Se probaron los isómeros C5 a C7, y el material Si-STW superó la capacidad de adsorción y selectividad de MFI de sílice pura, especialmente hacia los isómeros diramificados con átomos de carbono cuaternarios. Se calcularon las isotermas de adsorción, el calor de adsorción y el comportamiento de difusión de los hidrocarburos probados y se compararon con los resultados experimentales. Por lo tanto, las propiedades de adsorción de Si-STW pueden ser exploradas para su uso sobre el producto obtenido durante el proceso de hidromerización - que genera componentes de mayor octanaje para la mezcla de gasolina -, aumentando su número de octano. La producción de 6-kestosa para uso industrial como prebiótico y azúcar de bajo índice glucémico depende de su separación de las moléculas de sacarosa. La separación de una mezcla acuosa equimolar, que contiene sacarosa y 6-kestosa, mediante membranas zeolíticas se ha investigado a través de simulaciones de Dinámica Molecular. Una selección considerando las 253 estructuras de zeolitas reportadas, señaló los tres candidatos más prometedores (AET, ETR y DON), al evaluar el efecto de exclusión por tamaño (adsorción de sacarosa y exclusión de 6-kestosa), la movilidad de ambos azúcares dentro de las estructuras (evaluados con modelos tipo bulk), y simulando su futura aplicación como sistemas de membranas. Entre los mejores candidatos, la zeolita DON presentó una selectividad significativa para las moléculas de sacarosa, con el mayor flujo y siendo factible como material de sílice pura, igualando la composición química simulada., [CA] Els mètodes de química computacional s'han emprat en l'estudi de materials de zeolita aplicats a processos de separació. Es va considerar un enfocament clàssic, on els camps de força es van seleccionar durant els procediments de benchmark entre els models actualment disponibles. Els resultats obtinguts han sigut validats considerant dades experimentals i es va millorar la descripció dels models, quan va ser possible, mitjançant procediments de parametrització. Així, els millors models van descriure sistemes amb diferents graus de complexitat, que van ser simulats a través dels mètodes de Dinàmica Molecular i Monte Carlo. La difusió i l'adsorció en els microporus (bulk) i en la superfície externa de les zeolites es poden entendre a nivell molecular. Es va calcular l'energia d'adsorció i també es va descompondre la seua magnitud en les contribucions electroestàtica i de van der Waals. A més, va ser possible observar més de prop les interaccions amfitrió-convidat i convidat-convidat durant les trajectòries simulades. Considerant la creixent demanda energètica a nivell mundial, els biocombustibles es consideren una opció sostenible obtinguda a partir de biomassa. S'han simulat amb èxit els passos del procés experimental desenvolupat per Denayer et al. per a la recuperació de biobutanol a partir d'una mescla fermentada. Es van modelar els cicles d'adsorció i desorció en dues columnes de zeolites amb selectivitat complementària (tipus LTA i CHA), amb sistemes de nanoláminas i considerant les principals característiques experimentals. Encara que les escales de temps experimentals són inassolibles per als recursos computacionals disponibles actualment, els sistemes simulats van poder capturar els fenòmens experimentals i van ser avaluats més a fons a través del comportament microscòpic dels sistemes. Un estudi experimental i computacional va assenyalar la STW sílice pura (Si-STW) com un candidat prometedor per a la separació d'alcans lineals, monoramificats i diramificats. Es van provar els isòmers C5 a C7, i el material Si-STW va superar la capacitat d'adsorció i selectivitat de MFI de sílice pura, especialment cap als isòmers diramificats amb àtoms de carboni quaternaris. Es van calcular les isotermes d'adsorció, la calor d'adsorció i el comportament de difusió dels hidrocarburs provats i es van comparar amb els resultats experimentals. Per tant, les propietats d'adsorció de Si-STW poden ser explorades per al seu ús sobre el producte obtingut durant el procés de hidromerització - que genera components de major octanatge per a la mescla de gasolina -, augmentant el seu número d'octà. La producció de 6-kestosa per a ús industrial com a prebiòtic i sucre de baix índex glucèmic depén de la seua separació de les molècules de sacarosa. La separació d'una mescla aquosa equimolar que conté sacarosa i 6-kestosa mitjançant membranes de zeolites s'ha investigat amb simulacions de Dinàmica Molecular. Una selecció considerant les 253 estructures de zeolites reportades, va assenyalar els tres candidats més prometedors (AET, ETR i DON), en avaluar l'efecte d'exclusió per grandària (adsorció de sacarosa i exclusió de 6-kestosa), la mobilitat de tots dos sucres dins de les estructures (avaluats amb models tipus bulk), i simulant la seua futura aplicació com a sistemes de membranes. Entre els millors candidats, la zeolita DON va presentar una selectivitat significativa per a les molècules de sacarosa, amb el major flux i sent factible com a material de sílice pura, igualant la composició química simulada., [EN] Computational chemistry methods have been employed in the study of zeolite materials applied to separation processes. A classical approach was considered, where the force fields were selected during benchmark procedures among the models currently available. The obtained results have been validated considering experimental data, and models description was improved, when possible, by parameterization procedures. Thus, the best models described systems with different degrees of complexity, that were simulated through Molecular Dynamics and Monte Carlo methods. Diffusion and adsorption in zeolites' micropores (bulk) and external surface could be understood at a molecular level. The adsorption energy was calculated, and its magnitude also decomposed into the electrostatic and van der Waals contributions. Besides, a closer look into the host-guest and guest-guest interactions could be done during the trajectories simulated. Considering the growing energetic demand worldwide, biofuels are considered a sustainable option obtained from biomass. The steps of the experimental process developed by Denayer et al. for biobutanol recovery from a fermented mixture have been successfully simulated. Both adsorption and desorption cycles in two zeolitic columns with complementary selectivity (LTA and CHA-type) were modeled as nanosheet systems, considering the main experimental features. Although the experimental time scales are unreachable for the current computational resources available, the systems simulated could capture the experimental phenomena, and were further evaluated through the microscopic behavior of the systems. An experimental and computational study pointed pure silica STW (Si-STW) as a promising candidate for the separation of linear, monobranched and dibranched alkanes. C5 to C7 isomers were tested, and Si-STW material outperformed pure silica MFI adsorption capacity and selectivity, specially towards the dibranched isomers with quaternary carbon atoms. Adsorption isotherms, heat of adsorption and the diffusional behavior of the tested hydrocarbons have been calculated, and compared with the experimental results. Thus, Si-STW adsorptive properties can be further explored for its usage over the product obtained during the hydromerisation process - that generates higher-octane components for gasoline mixture -, increasing its octane number. The production of 6-kestose for industrial usage as prebiotic and low-glycemic sugar is dependent on its separation from sucrose molecules. The separation of an equimolar aqueous mixture, containing sucrose and 6-kestose, by zeolitic membranes have been investigated through Molecular Dynamics simulations. A screening considering the 253 zeolites structures reported, pointed out the three most promising candidates (AET, ETR and DON), by evaluating the size exclusion effect (adsorption of sucrose and exclusion of 6-kestose), the mobility of both sugars inside the frameworks (evaluated with bulk models), and simulating their future application as membrane systems. Among the best candidates, DON framework presented a significant selectivity for sucrose molecules, with the largest flux, and being feasible as a pure silica material, matching the chemical composition simulated., This work was supported by Generalitat Valenciana (GVA) predoctoral fellowship GRISOLIAP/2019/084. We also thank GVA for PROMETEO/2021/077 project and ASIC-UPV and SGAI-CSIC for the use of computational facilities. We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and use of introgression populations for the detection of QTL related to important agronomic traits in eggplant

  • Mangino, Giulio
[ES] La berenjena (Solanum melongena L.) es uno de los cultivos comerciales de hortalizas solanáceas más importantes que se cultiva ampliamente en Asia y la región del Mediterráneo. A pesar de su importancia económica, la disponibilidad de poblaciones experimentales y herramientas genómicas para el mejoramiento es aún muy limitada en comparación con otros cultivos importantes. Debido a la alteración progresiva del ecosistema global por el cambio climático, las plantas están constantemente expuestas a condiciones ambientales estresantes que impactan negativamente en su productividad. El cuello de botella genético ocurrido durante la domesticación de la berenjena, que limita la disponibilidad de recursos genéticos para su mejoramiento genético, hace que este cultivo sea extremadamente vulnerable al cambio climático, por lo que se requieren nuevas estrategias para reducir su erosión genética. En este contexto, los parientes silvestres de los cultivos (CWRs) han demostrado ser un recurso genético válido para la mejora vegetal, ya que su uso permite ampliar la diversidad genética de los cultivos y, en paralelo, desarrollar variedades mejoradas adaptadas al cambio climático. Para lograr este objetivo, en esta tesis doctoral informamos sobre el desarrollo y la evaluación de materiales avanzados de berenjena obtenidos mediante el uso de parientes silvestres. En el primer capítulo, realizamos una evaluación fenotípica en dos ambientes de un conjunto de 16 ILs de berenjena con introgresión de S. incanum, un pariente silvestre. Se evaluaron diecisiete caracteres agronómicos para comparar el rendimiento de las ILs con el parental recurrente e identificar QTLs para los caracteres investigados. Encontramos diferencias morfológicas significativas entre los parentales, y el híbrido resultó heterótico para los caracteres de vigor. A pesar de que la interacción entre genotipo y ambiente (G x E) resultó significativa para la mayoría de los caracteres, en general las ILs mostraron pocas diferencias fenotípicas con el progenitor receptor, incluso en presencia de grandes fragmentos de introgresión del progenitor silvestre. Se encontraron valores de heredabilidad bajos a moderados para los caracteres agronómicos. En total, detectamos diez QTLs estables, dos de los cuales estaban relacionados con caracteres de planta y cuatro para caracteres de flor y fruto. En general, las introgresiones de S. incanum mejoraron los valores medios de la mayoría de los caracteres de planta y flor, y disminuyeron el de los caracteres de fruto. Para tres QTLs relacionados con la longitud del pedicelo del fruto y con el peso del fruto, encontramos evidencia de sintenia con otros QTLs identificados previamente en poblaciones de berenjena. Siete QTLs eran nuevos, de los cuales cuatro relacionados con la altura de la planta, con la espinosidad del cáliz de la flor y con la longitud del pedicelo del fruto no colocalizaron con ningún QTL previamente identificado en las poblaciones de berenjena, y tres relacionados con el diámetro del tallo, con la longitud del pedúnculo y del estigma, fueron los primeros identificados en berenjena para estos caracteres. En el segundo capítulo, el conjunto de IL de berenjena con introgresiones de S. incanum se evaluó para la forma del fruto en dos ambientes. Específicamente, realizamos un fenotipado detallado de los frutos de los parentales, del híbrido y de las ILs utilizando 32 descriptores morfológicos de la herramienta fenómica Tomato Analyzer. Se encontraron grandes diferencias morfológicas en los frutos de los parentales, y el híbrido presentó valores negativos de heterosis para muchos de los caracteres de forma del fruto, siendo fenotípicamente más cercano al parental S. incanum. Para la mayoría de los descriptores de forma del fruto observamos diferencias significativas entre las ILs y el parental receptor, incluso en presencia de pequeños fragmentos de introgresión del parental silvestre. A pesar de que la contribución del ambiente y la..., [CA] L'albergínia (Solanum melongena L.) és un dels cultius comercials d'hortalisses solanácees més importants que es cultiva àmpliament a Àsia i la regió del Mediterrani. Malgrat la seua importància econòmica, la disponibilitat de poblacions experimentals i eines genòmiques per al millorament és encara molt limitada en comparació amb altres cultius importants. A causa de l'alteració progressiva de l'ecosistema global pel canvi climàtic, les plantes estan constantment exposades a condicions ambientals estressants que impacten negativament en la seua productivitat. El coll de botella genètic ocorregut durant la domesticació de l'albergínia, que limita la disponibilitat de recursos genètics per al seu millorament genètic, fa que aquest cultiu siga extremadament vulnerable al canvi climàtic, per la qual cosa es requereixen noves estratègies per a reduir la seua erosió genètica. En aquest context, els parents silvestres dels cultius (CWRs) han demostrat ser un recurs genètic vàlid per a la millora vegetal, ja que el seu ús permet ampliar la diversitat genètica dels cultius i, en paral·lel, desenvolupar varietats millorades adaptades al canvi climàtic. Per a aconseguir aquest objectiu, en aquesta tesi doctoral presentem el desenvolupament i l'avaluació de materials avançats d'albergínia obtinguts mitjançant l'ús de parents silvestres. En el primer capítol, realitzem una avaluació fenotípica en dos ambients d'un conjunt de 16 IL d'albergínia amb introgresions de S. incanum, un parent silvestre. Es van puntuar dèsset caràcters agronòmics per a avaluar el rendiment de les ILs en comparació amb el parental recurrent i identificar els QTL per als caràcters investigats. Trobarem diferències morfològiques significatives entre els parentals, i l'híbrid va resultar heteròtic per als caràcters de vigor. A pesar que la interacció entre genotip i ambient (G x E) va resultar significativa per a la majoria dels caràcters, en general les ILs van mostrar poques diferències fenotípiques amb el progenitor receptor, fins i tot en presència de grans fragments d'introgresió del progenitor silvestre. Es van trobar valors de heredabilitat baixos a moderats per als caràcters agronòmics. En total, detectarem deu QTL estables, dos dels quals estaven relacionats a caràcters de planta i quatre per a caràcters de flor i fruit. En general, les introgresions de S. incanum van millorar els valors mitjos de la majoria dels caràcters de planta i flor, i van disminuir el dels caràcters de fruit. Per a tres QTL relacionats amb la longitud del pedicel del fruit i amb el pes del fruit, trobem evidència de sintenia amb altres QTLs identificats prèviament en poblacions d'albergínia. Set QTL eren nous, dels quals quatre estaven relacionats amb l'altura de la planta, amb la espinositat del calze de la flor i amb la llargària del pedicel del fruit no van colocalitzar amb cap QTL prèviament identificat en les poblacions d'albergínia, i tres relacionats amb el diàmetre de la tija, amb la llargària del peduncle i de l'estigma, van ser els primers reportats en albergínia per a aquests caràcters. En el segon capítol, el conjunt de IL d'albergínia amb introgresions de S. incanum es va avaluar per a la forma del fruit en dos ambients. Específicament, realitzarem un fenotipado detallat dels fruits dels parentals, de l'híbrid i de les ILs utilitzant 32 descriptors morfològics de l'eina fenómica Tomato Analyzer. Es van trobar grans diferències morfològiques en els fruits dels parentals, i l'híbrid va presentar valors negatius de heterosis per a molts dels caràcters de forma del fruit, sent fenotípicamente més pròxim al parental S. incanum. Per a la majoria dels descriptors de forma del fruit observarem diferències significatives entre les ILs i el parental recipient, fins i tot en presència de xicotets fragments d'introgresió del parental silvestre. A pesar que la contribució de l'ambient i la interacció G × E van ser significatives per a quasi tots els descriptors, trobem que els seus..., [EN] Eggplant (Solanum melongena L.) is one of the most important commercial solanaceous vegetable crops grown widely in Asia and Mediterranean region. Despite its economic importance, the availability of experimental populations and genomic tools for breeding is still very limited compared to other major crops. Due to the progressive alteration of global ecosystem by climate change, plants are constantly exposed to stressful environmental conditions that impact negatively on their productivity. The genetic bottleneck occurred during eggplant domestication, which limits the availability of genetic resources for its genetic improvement, makes this crop extremely vulnerable to climate change, and, therefore, new strategies are needed for reducing its genetic erosion. In this context, crop wild relatives (CWRs) have demonstrated to be a valid genetic resources for plant breeding, as their use allows to broaden the genetic diversity of the crop and, in parallel, develop improved varieties adapted to climate change. To achieve this objective, in this doctoral thesis we reported on the development and evaluation of eggplant advanced materials obtained by using crop wild relatives. In the first chapter, we have conducted a phenotypic evaluation in two environments of a set of 16 eggplant ILs with introgression from S. incanum, a close wild relative. Seventeen agronomic traits were scored to test the performance of ILs compared to the recurrent parent and identify QTLs for the investigated traits. We found significant morphological differences between parents, and the hybrid was heterotic for vigour related traits. Although significant genotype x environment interaction (G x E) was detected for most traits, the ILs generally exhibited few phenotypic differences with recipient parent, even in the presence of large introgression fragments from the wild parent. Low to moderate heritability values were found for the agronomic traits. In total, we detected ten stable QTLs, two of which were for plant-related traits and four for both flower- and fruit-related traits. In general, S. incanum introgressions improved the performance of most plant- and flower-related traits and decreased that of fruit-related traits. For three QTLs related to fruit pedicel length and fruit weight, we found evidence of synteny to other QTLs previously reported in eggplant populations. Seven QTLs were new, of which four related to plant height, flower calyx prickles, and fruit pedicel length, did not colocalized with any previous identified QTLs in eggplant populations, and three related to stem diameter, peduncle length, and stigma length, were the first reported in eggplant for these traits. In the second chapter, the set of eggplant ILs with introgression from S. incanum was evaluated for fruit shape in two environments. Specifically, we performed a detailed phenotyping of the fruits of the parents, hybrid, and ILs using 32 morphological descriptors of the phenomics tool Tomato Analyzer. Large differences in fruit morphology were found between ILs parents, and the hybrid exhibited negative values of heterosis for many fruit shape traits, being phenotypically closer to S. incanum parent. For most fruit shape descriptors, we observed significant differences between ILs and recipient parent, even in the presence of small wild donor fragments. Although the contribution of the environment and G × E interaction were significant for almost all descriptors, we found that their effects on fruit shape were relatively low, and the observed variations in fruit shape was mainly genetically regulated. Hierarchical clustering revealed nine clusters of highly correlated traits and six ILs groups. A total of 41 QTLs were mapped. Of these, sixteen associated to Basic Measurement and Fruit Shape Index descriptors were syntenic to other previously reported in several intraspecific and interspecific eggplant populations, while twenty-five QTLs related to Blockiness, Homogeneity...., This work was undertaken as part of the initiative “Adapting Agriculture to Climate Change: Collecting, Protecting, and Preparing Crop Wild Relatives”, which is supported by the Government of Norway. The project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http://www.cwrdiversity.org/. Funding was also received from Spanish Ministerio de Economía, Industria y Competitividad and Fondo Europeo de Desarrollo Regional (grant AGL2015-64755-R from MINECO/FEDER); from Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE); from European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops); and from Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València (Ayuda a Primeros Proyectos de Investigación; PAID-06-18). Giulio Mangino is grateful to Generalitat Valenciana for a predoctoral grant within the Santiago Grisolía programme (GRISOLIAP/2016/012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regioselectivity in the adiabatic photocleavage of DNA-based oxetanes

  • Blasco-Brusola, Alejandro
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Miranda Alonso, Miguel Ángel
[EN] Direct absorption of UVB light by DNA may induce formation of cyclobutane pyrimidine dimers and pyrimidine-pyrimidone (6-4) photoproducts. The latter arise from the rearrangement of unstable oxetane intermediates, which have also been proposed to be the electron acceptor species in the photoenzymatic repair of this type of DNA damage. In the present work, direct photolysis of oxetanes composed of substituted uracil (Ura) or thymine (Thy) derivatives and benzophenone (BP) have been investigated by means of transient absorption spectroscopy from the femtosecond to the microsecond time-scales. The results showed that photoinduced oxetane cleavage takes place through an adiabatic process leading to the triplet excited BP and the ground state nucleobase. This process was markedly affected by the oxetane regiochemistry (head-to-head, HH, vs. head-to-tail, HT) and by the nucleobase substitution; it was nearly quantitative for all investigated HH-oxetanes while it became strongly influenced by the substitution at positions 1 and 5 for the HT-isomers. The obtained results clearly confirm the generality of the adiabatic photoinduced cleavage of BP/Ura or Thy oxetanes, as well as its dependence on the regiochemistry, supporting the involvement of triplet exciplexes. As a matter of fact, when formation of this species was favored by keeping together the Thy and BP units after splitting by means of a linear linker, a transient absorption at similar to 400 nm, ascribed to the exciplex, was detected., Financial support from the Spanish Government (RYC-2015-17737 and CTQ2017-89416-R) and from the Conselleria d'Educacio Cultura i Esport (PROMETEO/2017/075 and GRISOLIAP/2017/005) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Theoretical and experimental analysis of inter-core crosstalk in strongly-coupled multicore fiber tapers

  • Hernández-Ambato, Valeria Katherine
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present a comprehensive theoretical model based on the coupled-mode theory, capable of analyzing the crosstalk in a multicore optical fiber taper. The novelty of our developed model lies in its ability to describe the mode coupling in strongly-coupled multicore fiber tapers, a feature not covered by previously reported models that are only suitable for weakly-coupled multicore fibers. In our approach, we consider all possible coupling interactions among both adjacent and nonadjacent cores, along with the self-coupling within each core of a homogeneous seven-core optical fiber. Moreover, we also take into account that when a homogeneous multicore fiber undergoes tapering, a propagation constant mismatch appears between the central and external cores, due to the closer proximity of the external cores to the surrounding environment. To validate our model, we implemented fiber tapers of different waist lengths and diameters in a seven-core optical fiber and compared their inter-core crosstalk with the simulated results. Unlike previous studies that only injected light into the central core, we also explored the case where the input is launched into any external core of the fiber tapers. For both scenarios, we verified that our theoretical model can describe the dynamics of mode coupling occurring in a tapered multicore fiber for a large range of waist diameters. We believe that the findings from this study could be useful for designing sensing and signal-processing devices., This research was partially supported by MCIN/AEI/10.13039/501100011033 (under I+D+i projects INSTILL PID2020-120071RJ-I00, SYNERGY PID2020-118310RB-I00, INNOFIBER PID2023-152314OBI00 and NEXTPAM TED2021-131148B-I00). Valeria HernandezAmbato was supported by Generalitat Valenciana (under grant GRISOLIAP/2020/083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determining the neutrino mass ordering and oscillation parameters with KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alves Garre, S.
  • Aly, Z.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Androulakis, G.
  • Anghinolfi, M.
  • Anguita, M.
  • Anton, G.
  • Aublin, J.
  • Bagatelas, C.
  • Bou Cabo, Manuel
  • Diego-Tortosa, D.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] The next generation of water Cherenkov neu-trino telescopes in the Mediterranean Sea are under con- struction offshore France (KM3NeT/ORCA) and Sicily (KM3NeT/ARCA). The KM3NeT/ORCA detector features an energy detection threshold which allows to collect atmo- spheric neutrinos to study flavour oscillation. This paper reports the KM3NeT/ORCA sensitivity to this phenomenon. The event reconstruction, selection and classification are described. The sensitivity to determine the neutrino mass ordering was evaluated and found to be 4.4¿ if the true order- ing is normal and 2.3¿ if inverted, after 3 years of data taking. The precision to measure ¿m² and ¿¿¿ were also estimated and found to be 85.10¿¿ eV² and (¿¹.¿ -3.1)¿ for normal neu- trino mass ordering and, 75.10¿¿ eV² and (¿².¿ -7.0)¿ for inverted ordering. Finally, a unitarity test of the leptonic mixing matrix by measuring the rate of tau neutrinos is described. Three years of data taking were found to be sufficient to exclude ¿, The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education Scientific Research and Professional Training, ICTP through Grant AF-13, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR), Generalitat Valenciana: Grisolia (ref. GRISOLIA/2018/119) and GenT (ref. CIDEGENT/2018/034 and CIDEGENT/2019/043) programs, La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 713673), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact Dual-Band and Wideband Filters With Resonant Apertures in Rectangular Waveguide

  • Valencia-Sullca, Joaquín Francisco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
[EN] The objective of this article is to describe a new family of microwave bandpass filters in the rectangular waveguide based on resonant apertures, which can be used to implement both single- and dual-band transfer functions. The use of capacitive stubs and a staircase configuration is also discussed in order to enhance the out-of-band response and the selectivity of the filter with respect to the state of the art. Finally, simulations are compared with measured results, showing very good agreement, thereby fully validating both the new filter topologies and the design procedure., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spanish Government, through the Research and Development Project PID2019-103982RB, under Grant MCIN/AEI/10.13039/501100011033; and in part by the Generalitat Valenciana under Santiago Grisolia Grant GRISOLIA/2017/073. This article is an expanded version from the IEEE MTT-S International Microwave Symposium (IMS 2021), Atlanta, GA, USA, June 20-25, 2021 [DOI: 10.1109/IMS19712.2021.9574801].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fuzzy logic map-based knock control for spark ignition engines

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Jimenez, Irina Ayelen
  • Zhang, Y.
  • Shen, Tielong
[EN] Knock control represents one of the most critical aspects to reach optimal thermal efficiency in spark ignition engines, and its research is crucially important because it determines thermal efficiency, engine durability, and power density, as well as noise and emission performance. In this paper, a spark advance control based on a map learning technique is combined with a knock estimator to maximize the engine efficiency while keeping the knock probability below a desired limit. The proposed controller is experimentally validated on a production spark ignition gasoline engine test bench, and compared with a conventional spark advance controller in both, steady and transient conditions. From experimental results, a benefit in terms of thermal efficiency, control stability and engine security are achieved. The results show that the proposed method is capable of regulating the knock probability to a target percentage with low spark advance and thermal efficiency dispersion than the conventional controller., Irina A. Jimenez received a funding through the grant GRISOLIAP/2018/132 from the Generalitat Valenciana and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-induced band-gap energy increase in a metal iodate

  • Liang, Akun
  • Shi, Lan-Ting
  • Turnbull, Robin
  • Ibáñez, Jordi
  • Popescu, Catalin
  • Jasmin, M.
  • Singh, Jaspreet
  • Venkatakrishnan, Kanchana
  • Vaitheeswaran, Ganapathy
  • Errandonea, Daniel
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] A wide band gap is one of the essential requirements for metal iodates to be used as nonlinear optical materials. Usually, the band gap of these materials decreases under the application of pressure. Herein, we introduce a case in which the band-gap energy of a hydrated metal iodate, namely Ca(IO3)2 center dot H2O, has been successfully increased, from 4.52 to 4.92 eV, by applying external pressure without showing signs of saturation upon increasing pres-sure. The pressure-induced nonlinear band-gap opening correlates with the pressure-induced shortening of the I-O bond distances, as obtained from x-ray diffraction measurements. In addition, two pressure-induced isostructural phase transitions are observed in the pressure regions of 6.6-8.0 and 13.0-15.5 GPa. These two isostructural phase transitions cause a nonlinear pressure-induced evolution of the band-gap energy and crystal lattice parameters, as well as the occurrence of several extra peaks and peak splitting in Raman spectra., This study was supported by the MALTA ConsoliderTeam network (Project No. RED2018-102612-T), financed by MINECO/AEI/0.13039/501100003329,the I+D+i Project No.PID2019-106383GB-41/42 financed by MCIN/AEI/10.13039/501100011033, as well as by the Projects No. PROMETEO CIPROM/2021/075 (GREEN-MAT) and No. MFA/2022/007 financed by GeneralitatValenciana. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana. A.L. and D.E. thank the Generalitat Valenciana for Ph.D. Fellowship No. GRISOLIAP/2019/025.R.T. and D.E. thank the Generalitat Valenciana for Postdoctoral Fellowship No.CIAPOS/2021/20.The authors also thank ALBA synchrotron light source for the experiment funded under Proposal No. AV-2021095390at the MSPD-BL04 beamline. J.S. and K.V. would like to acknowledge IIT Hyderabad for providing computational facilities. J.S. would like to acknowledge CSIR for his Ph.D.fellowship. G.V. would like to acknowledge the Institute of Eminence, University of Hyderabad (UoH-IoE-RC3-21-046)for funding and CMSD, University of Hyderabad, forproviding computational facilities. The authors also thank the Tirant supercomputer (Universitat de Valencia) for providing computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Results of the follow-up of ANTARES neutrino alerts

  • Albert, A.
  • Alves, S
  • Andre, M.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Becherini, Y.
  • Belhorma, B.
  • Bendahman, M.
  • Benfenati, F.
  • Bertin, V.
  • Biagi, S.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
[EN] High-energy neutrinos could be produced in the interaction of charged cosmic rays with matter or radiation surrounding astrophysical sources. To look for transient sources associated with neutrino emission, a follow-up program of neutrino alerts has been operating within the ANTARES collaboration since 2009. This program, named TAToO, has triggered robotic optical telescopes (MASTER, TAROT, ROTSE and the SVOM ground based telescopes) immediately after the detection of any relevant neutrino candidate and scheduled several observations in the weeks following the detection. A subset of ANTARES events with highest probabilities of being of cosmic origin has also been followed by the Swift and the INTEGRAL satellites, the Murchison Widefield Array radio telescope and the H.E.S.S. high-energy gamma-ray telescope. The results of twelve years of observations are reported. In September 2015, ANTARES issued a neutrino alert and during the follow-up, a potential transient counterpart was identified by Swift and MASTER. A multi-wavelength follow-up campaign has allowed to identify the nature of this source and has proven its fortuitous association with the neutrino. No other optical and X-ray counterpart has been significantly associated with an ANTARES candidate neutrino signal. Constraints on transient neutrino emission have been set. The return of experience is particularly important for the design of the alert system of KM3NeT, the next generation neutrino telescope in the Mediterranean Sea., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seynesur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), The Netherlands; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; MCIN for PID2021-124591NB-C41, -C42, -C43, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014, ASFAE/2022/023 and AST22_6.2, with funding from the EU NextGenerationEU (PRTR-C17.I01), Generalitat Valenciana and Junta de Andalucia, and for CSIC-INFRA23013, Generalitat Valenciana for PROMETEO/2020/019, for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities. Based on observations collected at the European Organisation for Astronomical Research in the Southern Hemisphere under ESO programme(s) 095.D-0072(A). David Kaplan is supported by NSF grant AST-1816492.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Molecular and Functional Characterization of the Gonadal TGF-ß Factors Amh and Gsdf: Insights into Reproductive Regulation in the European sea bass (Dicentrarchus labrax)

  • Mascoli, Alessia
[ES] El control reproductivo es esencial para la domesticación de las especies acuícolas, ya que una regulación precisa de la gametogénesis permite obtener gametos y larvas de alta calidad y evitar fenómenos no deseados como la maduración precoz. Comprender los mecanismos endocrinos y paracrinos que regulan el desarrollo gonadal aporta conocimientos fundamentales y permite el desarrollo de herramientas para el control reproductivo en cautividad. En este contexto, la superfamilia TGF-ß constituye un eje central de la regulación reproductiva en vertebrados. Entre sus miembros, la hormona anti-mülleriana (Amh) y el factor derivado de células somáticas gonadales (Gsdf) desempeñan papeles clave en la diferenciación sexual y el desarrollo gonadal en teleósteos, aunque sus funciones, receptores y vías de señalización son poco conocidos. Esta tesis incluye la caracterización molecular, celular y funcional de Amh y Gsdf en la lubina europea (Dicentrarchus labrax), un modelo relevante para la acuicultura mediterránea. Para ello se ha aplicado un enfoque multidisciplinar integrando estudios de expresión génica y localización proteica, ensayos funcionales in vitro e in vivo, análisis evolutivos y experimentos de transactivación. Los objetivos principales incluyeron: caracterizar la expresión de amh, amhr2 y los parálogos gsdf1 y gsdf2 durante el desarrollo gonadal; esclarecer la función de Amh en gametogénesis y esteroidogénesis; reconstruir la evolución de gsdf y de los receptores TGF-ß; analizar la regulación transcripcional de gsdf; y determinar las interacciones funcionales ligando-receptor. Durante la diferenciación gonadal temprana, amh muestra una expresión gonadal 50 veces mayor en machos que en hembras. La proteína se localizó en testículos y ovarios adultos, confirmando su papel en ambos sexos, incluyendo la abundante presencia de Amh madura en ovarios post-vitelogénicos como forma bioactiva potencialmente circulante. Los ensayos funcionales revelaron un papel esteroidogénico no descrito previamente en teleósteos: la Amh potenció la acción de la Fsh en ovarios pre-vitelogénicos; y estimuló, in vitro e in vivo, la síntesis de andrógenos en testículos premeióticos. Además, la Amh de lubina estimuló la esteroidogénesis en testículos de medaka, mostrando conservación funcional entre especies. Ensayos realizados en sistemas heterólogos han mostrado que la Amh señaliza a través de Amhr2 activando tanto la vía canónica Smad1/5/8 (vía Alk2/3) como una vía no canónica, cAMP/PKA. La inhibición farmacológica evidenció interacciones entre ambas rutas, proporcionando una base mecanística para sus efectos esteroidogénicos. Se han identificado dos parálogos codificantes de Gsdf en lubina (gsdf1 y gsdf2), resultado de una duplicación independiente de la duplicación del genoma de los teleósteos. Sus patrones de expresión muestran dimorfismo sexual: gsdf1 predomina en testículos durante las fases iniciales de desarrollo, mientras que gsdf2 se expresa mayoritariamente en células foliculares ováricas. La regulación hormonal por Fsh, E2 y Amh, junto con la presencia de motivos reguladores en sus promotores, evidenció su integración en el control endocrino temprano de la gametogénesis. Finalmente, la caracterización funcional de los receptores TGF-ß de lubina reveló una notable plasticidad en la formación de dímeros de receptores tipo I/II y en la activación de vías Smad1/5/8 o Smad2/3, subrayando la versatilidad de este sistema en la regulación gonadal., [EN] Reproductive control is essential for the domestication of aquaculture species, as the precise regulation of gametogenesis enables the production of high-quality gametes and larvae while preventing undesired phenomena such as precocious maturation. Understanding the endocrine and paracrine mechanisms governing gonadal development provides fundamental knowledge and practical tools for reproductive management in captivity. In this context, the TGF-ß superfamily represents a central axis of reproductive regulation in vertebrates. Among its members, anti-Müllerian hormone (Amh) and gonadal soma-derived factor (Gsdf) play key roles in sexual differentiation and gonadal development in teleosts, although their functions, receptors, and signalling pathways remain only partially understood. This doctoral thesis investigates the molecular, cellular, and functional roles of Amh and Gsdf in the European sea bass (Dicentrarchus labrax), a species of major relevance for Mediterranean aquaculture. A multidisciplinary approach was applied, integrating expression and localization studies, functional assays in vitro and in vivo, evolutionary analyses, and transactivation experiments. The main objectives included characterizing the expression of amh, amhr2 and the gsdf paralogs during gonadal development; clarifying the role of Amh in gametogenesis and steroidogenesis; reconstructing the evolutionary history of gsdf and TGF-ß receptors; analysing the transcriptional regulation of gsdf; and determining functional ligand-receptor interactions. Amh showed a strongly male-biased expression during early gonadal differentiation, with levels approximately 50-fold higher in males than in females. Localization analyses confirmed its involvement in both testicular and ovarian development, including the presence of mature Amh in post-vitellogenic ovaries, suggesting a potentially circulating bioactive form. Functional assays revealed a previously undescribed steroidogenic role in teleosts: Amh enhanced Fsh-induced aromatase expression and E2 production in previtellogenic ovaries and stimulated androgen synthesis in premeiotic testes even in the absence of Fsh responsiveness. In vivo plasmid injections increased circulating 11-KT levels. Furthermore, sea bass Amh stimulated androgen production in medaka, indicating conserved bioactivity across teleost species. Heterologous systems demonstrated that Amh signals through Amhr2 via activation of the canonical Smad1/5/8 pathway (via Alk2/3) and also through a non-canonical cAMP/PKA pathway. Pharmacological inhibition uncovered interactions between both routes, providing a mechanistic basis for the observed steroidogenic effects. The study of Gsdf identified two species-specific paralogs (gsdf1 and gsdf2), originating from a duplication event independent of the teleost-specific whole-genome duplication. Their expression patterns were sexually dimorphic: gsdf1 predominated in males during early testicular development, whereas gsdf2 was mainly expressed in follicular cells of females. Hormonal regulation by Fsh, E2 and Amh, together with regulatory motifs in promoter regions, supported the integration of Gsdf into early endocrine control of gametogenesis. Finally, the functional characterization of TGF-ß receptors in sea bass revealed notable plasticity in type I/II receptor pairing and in the activation of Smad1/5/8 or Smad2/3 pathways, highlighting the versatility of this signalling network in gonadal regulation. Overall, this thesis redefines the role of Amh in teleosts as a positive regulator of steroidogenesis and demonstrates dual Smad/PKA signalling. It also reveals the functional diversification of gsdf paralogs and extensive flexibility in TGF-ß receptor usage. These findings provide a comprehensive molecular framework with potential applications for reproductive biotechnologies in aquaculture., [CA] El control reproductiu és essencial per a la domesticació de les espècies aquàtiques, ja que una regulació precisa de la gametogènesi permet obtenir gàmets i larves d'alta qualitat i evitar fenòmens indesitjats com la maduració precoç. Comprendre els mecanismes endocrins i paracrins que regulen el desenvolupament gonadal aporta coneixements fonamentals i permet el desenvolupament d'eines per al control reproductiu en captivitat. En aquest context, la superfamília TGF-ß constitueix un eix central de la regulació reproductiva en vertebrats. Entre els seus membres, l'hormona anti-mülleriana (Amh) i el factor derivat de cèl·lules somàtiques gonadals (Gsdf) exerceixen papers clau en la diferenciació sexual i el desenvolupament gonadal en teleòstes, encara que les seves funcions, receptors i vies de senyalització són poc conegudes. Aquesta tesi inclou la caracterització molecular, cel·lular i funcional de l'Amh i del Gsdf en llobarro (Dicentrarchus labrax), un model rellevant per a l'aqüicultura mediterrània. Per fer-ho, s'ha aplicat un enfocament multidisciplinari integrant estudis d'expressió gènica i localització proteica, assajos funcionals in vitro i in vivo, anàlisis evolutius i experiments de transactivació. Els objectius principals inclouen: caracteritzar l'expressió de amh, amhr2 i els paràlegs gsdf1 i gsdf2 durant el desenvolupament gonadal; aclarir la funció de l'Amh en gametogènesi i esteroidogènesi; reconstruir l'evolució del gsdf i dels receptors TGF-ß; analitzar la regulació transcripcional del gsdf; i determinar les interaccions funcionals lligand/receptor. Durant la diferenciació gonadal primerenca, l'amh mostra una expressió gonadal 50 vegades major en mascles que en femelles. La proteïna es localitza en testicles i ovaris adults, confirmant el seu paper en ambdós sexes, incloent-hi la presència abundant d'Amh madura en ovaris post-vitel·logènics com a forma bioactiva potencialment circulant. Els assajos funcionals han revelat un paper esteroidogènic no descrit prèviament en teleòstes: l'Amh potencia l'acció de la Fsh en ovaris pre-vitel·logènics i estimula, in vitro i in vivo, la síntesi d'andrògens en testicles premeiòtics. A més, l'Amh de llobarro estimula l'esteroidogènesi en testicles de medaka, mostrant conservació funcional entre espècies. Assajos realitzats en sistemes heteròlegs han mostrat que l'Amh senyalitza a través d'Amhr2 activant tant la via canònica Smad1/5/8 (via Alk2/3) com una via no canònica, cAMP/PKA. La inhibició farmacològica evidencia interaccions entre ambdues rutes, proporcionant una base mecanística per als seus efectes esteroidogènics. S'han identificat dos paràlegs codificants de Gsdf en llobarro (Gsdf1 i Gsdf2), resultat d'una duplicació independent de la duplicació del genoma dels teleòstes. Els seus patrons d'expressió mostren dimorfisme sexual: gsdf1 predomina en testicles durant les fases inicials de desenvolupament, mentre que gsdf2 s'expressa majoritàriament en cèl·lules fol·liculars ovàriques. La regulació hormonal per Fsh, E2 i Amh, juntament amb la presència de motius reguladors en els seus promotors, evidencia la seua integració en el control endocrí de les primeres etapes de la gametogènesi. Finalment, la caracterització funcional dels receptors TGF-ß de llobarro ha revelat una notable plasticitat en la formació de dímers de receptors tipus I/II i en l'activació de vies Smad1/5/8 o Smad2/3, subratllant la versatilitat d'aquest sistema en la regulació gonadal., This research was financially supported by Spanish MCIN/AEI/10.13039/501100011033/ and by the European Regional Development Fund (ERDF), “A way of making Europe”, through the following projects: xiv a. RTI2018-094667-B-C22 - Gonadal factors and genetic markers in early gametogenesis and puberty (GAMETOGENES). Plan Nacional de I+D+i. b. PID2021-122929OB-C32 -Underlying mechanisms in early oogenesis in fish focusing in a sustainable aquaculture (OVAGERM). Proyectos de Generación de Conocimiento 2021/ Investigación orientada Alessia Mascoli was supported by a PhD contract from the competitive funding program Santiago Grisolia, Generalitat Valenciana (Ref. GRISOLIAP/2020/129).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Architecture and performance of the KM3NeT front-end firmware

  • Aiello, Sebastiano
  • Albert, Arnauld
  • Alves Garre, Sergio
  • Aly, Zine
  • Ameli, Fabrizio
  • Andre, Michel
  • Androulakis, Giorgos
  • Anghinolfi, Marco
  • Anguita, Mancia
  • Anton, Gisela
  • Aublin, Julien
  • Bagatelas, Christos
  • Barbarino, Giancarlo
  • Baret, Bruny
  • Diego-Tortosa, Dídac
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] The KM3NeT infrastructure consists of two deep-sea neutrino telescopes being deployed in the Mediterranean Sea. The telescopes will detect extraterrestrial and atmospheric neutrinos by means of the incident photons induced by the passage of relativistic charged particles through the seawater as a consequence of a neutrino interaction. The telescopes are configured in a three-dimensional grid of digital optical modules, each hosting 31 photomultipliers. The photomultiplier signals produced by the incident Cherenkov photons are converted into digital information consisting of the integrated pulse duration and the time at which it surpasses a chosen threshold. The digitization is done by means of time to digital converters (TDCs) embedded in the field programmable gate array of the central logic board. Subsequently, a state machine formats the acquired data for its transmission to shore. We present the architecture and performance of the front-end firmware consisting of the TDCs and the state machine, The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-18-1268), Georgia; Deutsche Forschungsgemeinschaft (DFG), Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Istruzione, dell'Universita e della Ricerca (MIUR), PRIN 2017 program (Grant NAT-NET 2017W4HA7S) Italy; Ministry of Higher Education Scientific Research and Professional Training, ICTP through Grant AF-13, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The National Science Centre, Poland (2015/18/E/ST2/00758); National Authority for Scientific Research (ANCS), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucia (ref. SOMM17/6104/UGR), Generalitat Valenciana: Grisolia (ref. GRISOLIA/2018/119) and GenT (ref. CIDEGENT/2018/034) programs, La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 713673), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Impact of Biodegradable Plastics in the Properties of Recycled Polyethylene Terephthalate

  • Aldas, Miguel
  • Bertomeu, David
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Ferri, J.M|||0000-0002-1269-4973
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Since biodegradable materials are unwittingly mixed with synthetic materials, this work aimed to study the feasibility of reliably identifying some biopolymers, treated as contaminants, in the recycling process of polyethylene terephthalate (PET). The results showed that the miscibility between PET-PLA and PET-PHB is good. However, PHB is degraded in the recycling of PET due to the high processing temperatures used; meanwhile, PET and TPS are poorly miscible, characteristics also reflected in the microstructure. The contaminants decrease the mechanical properties of the recycled PET. WCA, FTIR, and DSC, do not allow to identify of these contaminants. FESEM resulted in the most successful technique to detect the biodegradable polymers in the PET matrix. No significant degradation of PET under composting conditions was obtained due to the presence of biodegradable polymers, and the effects of the biodegradable contaminants continue to reduce the mechanical performance of the recycled PET after 1 year of storage., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO), project: PROMADEPCOL (MAT2017-84909-C2-2-R). M.A. thanks Secretaria de Educacion Superior, Ciencia, Tecnologia e Innovacion (SENESCYT, Ecuador) and Escuela Politecnica Nacional. C.P. thanks Santiago Grisolia fellowship (GRISOLIAP/2019/113) from Generalitat Valenciana. J.M.F. thanks to Posdoctoral GVA fellowship (APOSTD/2019/122). from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer&apos, s spent grain

  • Rojas-Lema, S.
  • Mellinas, C.
  • Jiménez, A.
  • Garrigos, M.C.
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10-30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0¿33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity., This research is a part of the grants PID2023-152869OB-C21, PID2023-152869OB-C22, PID2020-116496RB-C21, PID2020-116496RB-C22, and TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGener-ationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant numbers CIGE/2023/46, and CIAICO/2023/253, for supporting this work. S.R.-L. acknowledges the Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132) . Microscopy Services at UPV are also acknowledged for their support in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of the aperiodic Mephisto Waltz sequence in the design of diffractive lenses

  • Garmendía-Martínez, Adrián
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Gimenez Palomares, Fernando
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Furlan, Walter Daniel
[EN] In this work, we present the design of a new quadrifocal diffractive lens based on the aperiodic Mephisto Waltz sequence. The proposed diffractive optical element (DOE), coined as the Mephisto Waltz Zone Plate (MWZP), allows the formation of four focal planes along the direction of propagation. The optical characteristics of this lens are directly correlated with the properties of the aperiodic sequence used in its design. The focusing properties of the MWZP have been analytically and experimentally studied, demonstrating that they preserve the inherent self-similarity characteristics of the aperiodic sequence. This self-similarity, along with the quadrifocal properties, highlights the potential of the MWZP in advanced optical applications, offering new capabilities in controlling light propagation and focusing., This work was supported by the Spanish Ministerio de Ciencia e Innovación (grant PID2022-142407NB-I00) and by Generalitat Valenciana, Spain (grant CIPROM/2022/30), Spain. A.G.M. acknowledges the financial support from the Generalitat Valenciana, Spain (GRISOLIAP/2021/121).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic characterization of combustion chambers in reciprocating engines: An application for low knocking cycles recognition

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Jimenez, Irina Ayelen
[EN] In this paper the acoustic response of a combustion chamber is studied by assuming different pressure field excitation. The viscous effects on the combustion chamber and the finite impedance of the walls have been modeled with a first order system, which damps the resonance oscillation created by combustion. The characterization of the acoustic response of the combustion chamber has been used to identify the source of the excitation in order to distinguish normal combustion from knock. Two engines, a conventional spark ignited (SI) and a turbulent jet ignition (TJI) engine, were used, fueled with gasoline and compressed natural gas (CNG), respectively. The pressure fluctuations in the combustion chambers are analyzed and a pattern recognition system identifies the most likely source of excitation. This new criteria for knock identification permits a more consistent differentiation between knocking and no-knocking cycles, independent on the amplitude of the phenomenon, thus allowing the improvement for knock control algorithms, specially with combustion modes which heavily excite resonance, such as turbulent jet ignition or homogeneous charge compression ignition (HCCI)., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Irina A. Jimenez received a funding through the grant 132GRISOLIAP/2018/132 from the Generalitat Valenciana and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pressure-induced band anticrossing in two adamantine ordered-vacancy compounds: CdGa2S4 and HgGa2S4

  • Liang, A.
  • Shi, L.T.
  • Errandonea, D.
  • Tiginyanu, I.M.
  • Ursaki, V.V.
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Gomis, O.|||0000-0001-6763-0638
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] This paper reports a joint experimental and theoretical study of the electronic band structure of two ordered-vacancy compounds with defect-chalcopyrite structure: CdGa2S4 and HgGa2S4. High-pressure optical-absorption experiments (up to around 17 GPa) combined with first-principles electronic band-structure calculations provide compelling evidence of strong nonlinear pressure dependence of the bandgap in both compounds. The nonlinear pressure dependence is well accounted for by the band anticrossing model that was previously established mostly for selenides with defect chalcopyrite structure. Therefore, our results on two sulfides with defect chalcopyrite structure under compression provide definitive evidence that the nonlinear pressure dependence of the direct bandgap is a common feature of adamantine ordered-vacancy compounds and does not depend on the type of anion., This work was supported by the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI), the European Fund for Regional Development (ERDF, FEDER) under grants PID2019-106383GB-C41/42 and RED2018-102612-T (MALTA Consolider-Team Network), and the Generalitat Valenciana under grant Prometeo/2018/123 (EFIMAT). This work also has received partial funding from the Horizon-2020 Spreading Excellence and Widening Participation research and innovation programme of the European Union under the grant #810652 (NanoMedTwin project). A.L. and D.E. would like to thank the Generalitat Valenciana for the Ph.D. fellowship GRISOLIAP/2019/025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accelerated serverless computing based on GPU virtualization

  • Naranjo-Delgado, Diana María
  • Risco, Sebastián
  • Pérez-González, Alfonso María
  • Alfonso Laguna, Carlos De|||0000-0002-2378-021X
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
  • Moltó, Germán|||0000-0002-8049-253X
[EN] This paper introduces a platform to support serverless computing for scalable event-driven data processing that features a multi-level elasticity approach combined with virtualization of GPUs. The platform supports the execution of applications based on Docker containers in response to file uploads to a data storage in order to perform the data processing in parallel. This is managed by an elastic Kubernetes cluster whose size automatically grows and shrinks depending on the number of files to be processed. To accelerate the processing time of each file, several approaches involving virtualized access to GPUs, either locally or remote, have been evaluated. A use case that involves the inference based on deep learning techniques on transtoracic echocardiography imaging has been carried out to assess the benefits and limitations of the platform. The results indicate that the combination of serverless computing and GPU virtualization introduce an efficient and cost-effective event-driven accelerated computing approach that can be applied for a wide variety of scientific applications., The work presented in this article has been partially funded by a research grant from the regional government of the Comunitat Valenciana (Spain), co-funded by the European Union ERDF funds (European Regional Development Fund) of the Comunitat Valenciana 2014-2020, with reference IDIFEDER/2018/032 (High-Performance Algorithms for the Modeling, Simulation and early Detection of diseases in Personalized Medicine). The authors would also like to thank the Spanish "Ministerio de Economia, Industria y Competitividad" for the project "BigCLOE" with reference number TIN2016-79951-R and the project ATMOSPHERE, funded jointly by the European Commission under the Cooperation Programme, Horizon 2020 grant agreement No 777154 and the Brazilian Ministerio de Ciencia, Tecnologia e Inovacao (MCI-I), number 51119. D.M.N would like to thank the "Generalitat Valenciana, Spain" for the grant GrisoliaP/2017/071.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the Properties of Thermo-Compressed Polylactide Films for Food Packaging Applications by Individual and Combined Additions of Lactic Acid Oligomer and Halloysite Nanotubes

  • Rojas-Lema, Sandra
  • Melendez-Rodriguez, Beatriz
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] In this work, films of polylactide (PLA) prepared by extrusion and thermo-compression were plasticized with oligomer of lactic acid (OLA) at contents of 5, 10, and 20 wt%. The PLA sample containing 20 wt% of OLA was also reinforced with 3, 6, and 9 parts per hundred resin (phr) of halloysite nanotubes (HNTs) to increase the mechanical strength and thermal stability of the films. Prior to melt mixing, ultrasound-assisted dispersion of the nanoclays in OLA was carried out at 100 ºC to promote the HNTs dispersion in PLA and the resultant films were characterized with the aim to ascertain their potential in food packaging. It was observed that either the individual addition of OLA or combined with 3 phr of HNTs did not significantly affect the optical properties of the PLA films, whereas higher nanoclay contents reduced lightness and induced certain green and blue tonalities. The addition of 20 wt% of OLA increased ductility of the PLA film by nearly 75% and also decreased the glass transition temperature (Tg) by over 18 ºC. The incorporation of 3 phr of HNTs into the OLA-containing PLA films delayed thermal degradation by 7 ºC and additionally reduced the permeabilities to water and limonene vapors by approximately 8% and 47%, respectively. Interestingly, the highest barrier performance was attained for the unfilled PLA film plasticized with 10 wt% of OLA, which was attributed to a crystallinity increase and an effect of ¿antiplasticization¿. However, loadings of 6 and 9 phr of HNTs resulted in the formation of small aggregates that impaired the performance of the blend films. The here-attained results demonstrates that the properties of ternary systems of PLA/OLA/HNTs can be tuned when the plasticizer and nanofiller contents are carefully chosen and the resultant nanocomposite films can be proposed as a bio-sourced alternative for compostable packaging applications., This research work was funded by the Spanish Ministry of Science and Innovation (MICI) project numbers RTI2018-097249-B-C21 and MAT2017-84909-C2-2-R. S.R.-L is a recipient of a Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132). L.Q.-C. wants to thank GVA for his FPI grant (ACIF/2016/182) and the Spanish Ministry of Education, Culture, and Sports (MECD) for his FPU grant (FPU15/03812), while D.G.-G. also acknowledges GVA for his postdoctoral contract (APOSTD/2019/201). B.M.-R. and S.T.-G. acknowledge MICIU for her FPI grant (BES-2016-077972) and his Juan de la Cierva¿Incorporación contract (IJCI-2016-29675), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Separation of an aqueous mixture of 6-kestose/sucrose with zeolites: A molecular dynamics simulation

  • Bolaño Losada, Iria
  • Grobas-Illobre, Pablo
  • Misturini, Alechania
  • Polaina, Julio
  • Seminóvski, Yohanna
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Extra-large pore zeolites are a small subset (21) among the whole list of 253 zeolites available. The discovery of new low-glycemic sugars is very attractive as new healthy additives in the food field. This is the case of the 6-kestose. In the present case, it appears in a mixture in aqueous solution together with sucrose, the separation of the mixture being necessary. For this, we have focused on using certain zeolites with adequate pore sizes that allow the separation of this mixture, considering that since the molecular size of 6-kestose is greater than sucrose, it is necessary to promote the sorption of the latter, so that the first can be purified. After a computational screening of micropores of the 253 IZA zeolites, 11 zeolites were selected. Of these, 3 extra-large pore zeolites (AET, DON, ETR) have been proposed, which were analyzed in-depth through a molecular dynamics study considering the external surface. The results show that DON presents the most promising theoretical results for a selective sucrose/6-kestose separation., We thank MICINN of Spain for funding through projects RTI2018101784-B-I00, RTI2018-101033-B-I00, SEV-2016-0683 as well as ASICUPV and CESGA for computational facilities. IBL and PGI gratefully acknowledge CSIC for a JAE-Intro fellowship. AM thanks Generalitat Valenciana for the predoctoral fellowship GRISOLIAP/2019/084.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AlLoRa: Empowering environmental intelligence through an advanced LoRa-based IoT solution

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Environmental intelligence aims to improve the decision-making process for high social and environmental value ecosystems. To this end, data are collected using different sensors to allow monitoring of different variables of interest. Typically, these ecosystems cover a large geographical area, with spots of low or no connectivity, preventing their monitoring in real time. In this work, we propose \allora{} (Advanced Layer LoRa), a modular, low-power, long-range communication protocol based on LoRa, that allows monitoring of remote natural areas. \allora{} has been evaluated and tested in an operational oceanographic buoy that has been deployed to address the specific environmental crisis of the Mar Menor lagoon in southeastern Spain - a region spanning 135 Km currently undergoing severe eutrophication process. Our results reveal that \allora{} offers good performance regarding transfer time, power consumption, and range. The throughput ranged from around 2 kbps with SF7 to approximately 300 bps with SF11; the power consumption per kilobyte transmitted varied from $395 \mu Wh$ to $428 \mu Wh$ depending on the specific device used. The Mesh mode test successfully maintained communication between nodes over 20.33 km. Further tests in various configurations under challenging conditions validated the mesh forwarding approach. Despite tripling the distance, the system maintained reliable data transfer, improving speeds from the original point-to-point setup., This work has been supported by the European Union s Horizon 2020 research and innovation program under grant agreement No 101017861 and also by the project Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021-130890B funded by MCIN/AEI and by European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Studying bioluminescence flashes with the ANTARES deep-sea neutrino telescope

  • Reeb, Nico
  • Hutschenreuter, Sebastian
  • Zehetner, Philipp
  • Ensslin, Torsten
  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Anghinolfi, M.
  • Anton, G.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Capone, A.
  • Martínez Mora, Juan Antonio
  • Poirè, C.
  • Ardid, Miguel|||0000-0002-3199-594X
[EN] We develop a novel technique to exploit the extensive data sets provided by underwater neutrino telescopes to gain information on bioluminescence in the deep sea. The passive nature of the telescopes gives us the unique opportunity to infer information on bioluminescent organisms without actively interfering with them. We propose a statistical method that allows us to reconstruct the light emission of individual organisms, as well as their location and movement. A mathematical model is built to describe the measurement process of underwater neutrino telescopes and the signal generation of the biological organisms. The Metric Gaussian Variational Inference algorithm is used to reconstruct the model parameters using photon counts recorded by photomultiplier tubes. We apply this method to synthetic data sets and data collected by the ANTARES neutrino telescope. The telescope is located 40 km off the French coast and fixed to the sea floor at a depth of 2475 m. The runs with synthetic data reveal that we can model the emitted bioluminescent flashes of the organisms. Furthermore, we find that the spatial resolution of the localization of light sources highly depends on the configuration of the telescope. Precise measurements of the efficiencies of the detectors and the attenuation length of the water are crucial to reconstruct the light emission. Finally, the application to ANTARES data reveals the first localizations of bioluminescent organisms using neutrino telescope data., We thank our colleagues of the Information Field Theory Group who provided insight and expertise on the NIFTy framework and Statistical Inference. We would also like to show our gratitude to Thomas Eberl for sharing his expertise on the ANTARES experiment and the data set. SH acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No 772663). The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, PGC2018-096663-A-C42, PGC2018-096663-B-C43, PGC2018-096663-B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (ref. GRISOLIA/2018/119), and GenT (refs. CIDEGENT/2018/034, CIDEGENT//2019/043, CIDEGENT//2020/049) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain; Ministry of Higher Education, Scientific Research and Professional Training, Morocco. We also acknowledge the technical support of Ifremer, AIM, and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities. Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure Raman study of Fe(IO3)3: Soft-mode behavior driven by coordination changes of iodine atoms

  • Liang, Akun
  • Rahman, Saqib
  • Rodriguez-Hernandez, Placida
  • Muñoz, Alfonso
  • Nenert, Gwilherm
  • Errandonea, Daniel
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] We report high-pressure Raman spectroscopy studies of Fe(IO3)(3) up to nearly 21 GPa that have been interpreted with the help of density functional theory calculations, which include the calculation of phonon dispersion curves and elastic constants at different pressures. Zero-pressure Raman-active mode frequencies and their pressure dependences have been determined. Modes have been assigned and correlated to atomic movements with the help of calculations. Interestingly, in the high-frequency region, there are several modes that soften under compression. These modes have been identified as internal vibrations of the IO3 coordination polyhedron. Their unusual behavior is a consequence of the changes induced by pressure in the coordination sphere of iodine, which gradually change from a threefold coordination to an almost sixfold coordination under compression. The coordination change is favored by the decrease of the stereoactivity of the iodine lone electron pair so that likely a real sixfold coordination is attained after a first-order phase transition previously reported to occur above 21 GPa. The strong nonlinear behavior found in Raman-active modes as well as in theoretically calculated elastic constants has been discovered to be related to the occurrence of two previously unreported isostructural phase transitions at 1.5-2.0 and 5.7-6.0 GPa as shown by dynamic instabilities close to the Brillouin zone center., This work was supported by the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI), the European Fund for Regional Development (ERDF, FEDER) under grants MAT2016-75586-C4-1/2/3-P, PID2019-106383GB-C41/42/43, and RED2018-102612-T (MALTA Consolider-Team Network), and the Generalitat Valenciana under grant Prometeo/2018/123 (EFIMAT). A.L. and D.E. would like to thank the Generalitat Valenciana for the Ph.D. fellowship GRISOLIAP/2019/025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Descifrando las funciones de la microbiota intestinal en la obesidad.

  • López Almela, Inmaculada
[ES] La obesidad es uno de los principales problemas de salud pública debido a su elevada prevalencia y a las comorbilidades asociadas, lo que se traduce en una reducción considerable de la calidad y esperanza de vida, además de un enorme gasto económico. Su origen es multifactorial y el desarrollo de terapias efectivas para combatirla resulta complejo. La microbiota intestinal ejerce un papel relevante en el mantenimiento del balance energético y salud metabólica. Por ello, las estrategias basadas en la modificación de la microbiota intestinal son consideradas potenciales alternativas para el manejo clínico de la obesidad. No obstante, se requiere un mayor conocimiento sobre cuáles son las especies bacterianas clave en el mantenimiento de la homeostasis energética del hospedador y su modo de acción. El objetivo general de la tesis ha sido identificar nuevas estrategias basadas en la manipulación de la composición y funciones de la microbiota intestinal eficaces contra la obesidad, así como sus mecanismos de interacción con el hospedador. El capítulo primero de la tesis se centra en estudiar los mecanismos de acción por los que Bacteroides uniformis CECT 7771 ejerce efectos protectores frente al desarrollo de la obesidad, tal y como nuestro grupo ha descrito en trabajos previos. A través de un estudio en ratones con obesidad inducida por la dieta hemos demostrado que esta cepa reduce la disfunción metabólica a través de la modulación de la microbiota intestinal y las alteraciones inmunológicas en el intestino y el tejido adiposo asociados a la obesidad. Todos los efectos sobre el eje intestino-tejido adiposo parecen estar mediados por la activación de TLR5. Además, hemos desarrollado una estrategia similar a un simbiótico con el fin de incrementar la eficacia de esta bacteria administrándola a dosis menores. La formulación simbiótica se diseñó en base a la preferencia de B. uniformis CECT 7771 por el salvado de trigo (WBE) como fuente de carbono en cultivos in vitro. La administración conjunta de la bacteria y WBE mostró beneficios inmuno-metabólicos al reducir el aumento de peso corporal y la adiposidad, al tiempo que mejoraron las rutas del metabolismo energético moduladas por insulina y la homeostasis inmunológica intestinal. Además, reforzó la primera línea de defensa inmunológica al aumentar los niveles de butirato y restaurar los niveles de IEL inducidos y las ILC3. En el segundo capítulo hemos llevado a cabo dos estudios preclínicos que describen los efectos de dos nuevas bacterias autóctonas del tracto gastrointestinal humano como potenciales probióticos para el tratamiento de la obesidad identificadas por el grupo. El primer estudio, la administración de Holdemanella biformis CECT 9752 a ratones con obesidad inducida por la dieta redujo los niveles de glucosa en ayuno y mejoró la tolerancia oral a la glucosa de forma independiente a la insulina. A nivel del contenido luminal del intestino grueso, la bacteria incrementó los niveles de ácidos grasos insaturados, potenciales secretagogos lipídicos de GLP-1. A nivel del intestino delgado, incrementó la sensibilidad a GLP-1 de las neuronas vagales aferentes, mecanismo implicado en la producción endógena de glucosa. A nivel hepático, la suplementación con la bacteria redujo la gluconeogénesis y mejoró la sensibilidad a insulina. En el segundo estudio hemos evaluado los efectos inmuno-metabólicos de Phascolarctobacterium faecium DSM 32890, consumidora de succinato y productora de propionato en un modelo animal de obesidad. La administración redujo el aumento de peso corporal y la ingesta de alimentos y mejoró la tolerancia oral a la glucosa. Estos beneficios se asociaron a un aumento sostenido de la hormona intestinal anorexigénica PYY en plasma y una prevención de la hipersecreción de GIP inducida por la dieta rica en grasa. Además, la bacteria normalizó la inmunidad intestinal alterada en la obesidad, y mejoró, [CA] L'obesitat és un dels principals problemas de salut pública a causa de la seua elevada prevalença i a les comorbilitats associades, la qual cosa es tradueix en una reducció considerable de la qualitat i de l'esperança de vida, a més d'una enorme despesa econòmica. El seu origen es multifactorial i el desenvolupament de teràpies efectives per combatre-les resulta complex. La microbiota intestinal exerceix un paper rellevant en el manteniment del balanç energètic i salut metabòlica. Per això, les estrategias basades en la modificació de la microbiota intestinal son considerades hui en dia potencials alternatives per al maneig clínic de l'obesitat. No obstant això, es requereix d'un major coneixement sobre quines son les espècies bacterianes claus al manteniment de l'homeòstasi energètica de l'hoste i la seua manera d'acció. L'objectiu general de la tesi ha sigut identificar noves estratègies basades en la manipulació de la composició i funcions de la microbiota intestinal eficaces contra l'obesitat, així com els seus mecanismes d'interacció amb l'hoste. El capítol primer de la tesi es centra en estudiar els mecanismes d'acció pels quals Bacteroides uniformis CECT 7771 exerceix efectes protectors enfront del desenvolupament de l'obesitat, tal com el nostre grup ha descrit previament. A través d'un estudi en ratolins amb obesitat induïda per la dieta hem demostrat que aquesta soca redueix la disfunció metabòlica a través de la modulació de la microbiota intestinal i les alteracions immunològiques en l'intestí i al teixit adipos epididimal associats a l'obesitat. Tots els efectes sobre l'eix intestí-teixit adipós semblen estar mediades per l'activació de TLR5. A més, hem desenvolupat una estrategia similar a un simbiòtic amb la finalitat d'incrementar l'eficàcia d'aquest bacteri administrant-la a dosis menors. La fomulació simbiòtica es va dissenyar basant-se en la preferència de B. uniformis CECT 7771 pel segó del blat (WBE) com a font de carboni en cultius in vitro. L'administració conjunta de la bacteria i WBE va mostrar beneficis immuno-metabòlics al reduir l'augment de pes corporal i l'adipositat, al mateix temps que van millorar les rutes del metabolisme energètic modulades per insulina i la homeòstasi immunològica intestinal. A més, va reforçar la primera línia de defensa immunològica augmentant els nivells de butirat i restaurant els nivells de IEL induïts i de ILC3. Al segon capítol de la tesi hem dut a terme dos estudis preclínics que descriuen els efectes de dos nous bacteris autòctones del tracte gastrointestinal humà com a potencials probiòtics per al tractament de l'obesitat identificades amb posterioritat pel grup. El primer estudi, l'administració de Holdemanella biformis CECT 9752 a un model animal d'obesitat va reduir els nivells de glucosa en dejú i va millorar la tolerància oral a la glucosa de manera independent a la insulina. A nivell del contingut luminal de l'intestí gros, el bacteri va incrementar els nivells d'àcids grassos insaturats, potencials secretagogos lipídics de GLP-1. A nivell de l'intestí prim, va incrementar la sensibilitat a GLP-1 de les neurones vagals aferents, mecanisme implicat en la producció endògena de glucosa. A nivell hepàtic, la suplementació amb el bacteri va reduir la gluconeogènesi i va millorar la sensibilitat a insulina. En el segon estudi hem avaluat els efectes immuno-metabòlics de Phascolarctobacterium faecium DSM 32890, consumidora de succinat i productora de propionat a un model animal d'obesitat. L'administració va reduir l'augment de pes corporal i l'ingesta d'aliments i va millorar la tolerància oral a la glucosa. Aquests beneficis es van associar a un augment sostingut de l'hormona intestinal anorexigénica PYY en plasma i la prevenció de la hipersecreció de GIP induïda per la dieta rica en greix. A més, el bacteri va normalitzar la immunitat intestinal alterada en l'obesitat i va millorar, [EN] Obesity is one of the main public health problems due to its high prevalence and associated comorbidities, which results in a considerable reduction of the health-related quality of life and life expectancy, as well as in an overwhelming cost to global health economies. It has a multifactorial origin and the development of effective therapies is complex and has become one of the main challenges for society. The gut microbiota plays an important role in the maintenance of energy balance and metabolic health. Therefore, strategies based on gut microbiota modification to beneficially modulate energy metabolism are nowadays considered potential alternatives for the clinical management of obesity. However, the effective implementation of these strategies requires the identification of key bacterial species for the maintenance of host energy homeostasis as well as the better understanding of which mechanisms are behind of their effects. The general objective of this doctoral thesis has been to identify new and effective strategies against obesity based on the manipulation of the gut microbiota composition and function, as well as their mechanisms of interaction with the host. The first chapter of the thesis focuses on studying the mechanisms of action by which Bacteroides uniformis CECT 7771 induces protective effects against the onset of obesity, based on previous studies of our group. An intervention conducted in diet-induced obese mice, we have demonstrated that this strain reduces metabolic dysfunction through the modulation of the intestinal microbiota and immune players obesity associated in both intestine and epididymal white adipose tissue. All the effects on the gut-adipose tissue axis appear to be mediated by TLR5 activation. Moreover, we have developed a symbiotic strategy with the aim of increasing the B. uniformis anti-obesity efficacy at lower doses. The symbiotic formulation was designed based on the preference of B. uniformis CECT 7771 for wheat bran (WBE) as a carbon source in in vitro cultures. The co-administration of the bacteria and WBE showed immuno-metabolic benefits reducing body weight gain and adiposity, along with improving insulin-modulated energy metabolism pathways and intestinal immune homeostasis. In addition, It strengthened the first line of immune defence by increasing butyrate levels and restoring levels of induced IEL and ILC3. In the second chapter of the thesis we have carried out two pre-clinical studies describing the effects of two new autochthonous bacteria of the human gastrointestinal tract as potential probiotics for the treatment of obesity identified later by the group. The first study, the administration of Holdemanella biformis CECT 9752 in an animal model obesity reduced fasting glucose levels and improved oral glucose tolerance in an insulin-independent manner. In the luminal content of the large intestine, the bacteria increased the abundance of unsaturated fatty acids, potential GLP-1 secretagogues. In the small intestine, it could directly increase the GLP-1 sensitivity of vagal afferent neurons, a mechanism involved in hepatic endogenous glucose production. At the hepatic level, the supplementation with the bacteria reduced gluconeogenesis and improved insulin sensitivity. In the second study we have evaluated the immuno-metabolic effects of Phascolarctobacterium faecium DSM 32890 succinate consumer and propionate producer in an animal model of diet-induced obesity. The bacteria reduced body weight gain and food intake and improved oral glucose tolerance. These benefits were associated with a sustained increase in plasma of the anorexigenic gut hormone PYY and a prevention of high-fat diet-induced GIP hypersecretion. In addition, the bacteria normalized the impaired intestinal immunity in obesity and improved intestinal barrier integrity., This study received funding from the European Union Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 797297 (M.R-P) and from the European Union 7th Framework program under the grant agreement no 613979 (MyNewGut) and grant AGL2017-88801-P from the Spanish Ministry of Economy and Competitiveness (MCIU, Spain). The Santiago Grisolía scholarship (GRISOLIAP/2014/110) to E.F from Generalitat Valenciana and the FPI scholarship (BES-2015-073930) of I López-Almela and the PTA contract (PTA2013-8836-I) of I. Campillo from MCIU are fully acknowledged.