Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Fiber Layout to the Sensor: Preparation Methods as Key Factors for High-Quality Coupled-Core-Fiber Sensors

  • Lindner, F.
  • Bierlich, J.
  • Alonso-Murias, M.
  • Flores-Bravo, J. A.
  • Villatoro, J.
  • Wondraczek, K.
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] During recent years, the optical-fiber-based simultaneous sensing of strain and temperature has attracted increased interest for different applications, e.g., in medicine, architecture, and aerospace. Specialized fiber layouts further enlarge the field of applications at much lower costs and with easier handling. Today, the performance of many sensors fabricated from conventional fibers suffers from cross-sensitivity (temperature and strain) and relatively high interrogation costs. In contrast, customized fiber architectures would make it possible to circumvent such sensor drawbacks. Here, we report on the development of a high-quality coupled-core fiber and its performance for sensors¿from the initial fiber layout via elaboration of the preform and fiber up to the sensor evaluation. A compact, high-speed, and cost-effective interrogation unit using such a specialized coupled-core fiber has been designed to monitor reflectivity changes while even being able to distinguish the direction of the force or impact. Several fiber core material techniques and approaches were investigated, which made it possible to obtain a sufficient volume of material for the required fiber core number and a specialized fiber core geometry in terms of core distances and radial refractive index profile, whilst handling the non-symmetrical fiber architectures of such modeled, complex structures and balancing resources and efforts., This work has received funding from the European Union's Horizon2020 Program for research, technological development and demonstration under Grant Agreement no. degrees 779472 ACTPHAST project (P2022-06). This work was also funded by the German Federal Ministry of Education and Research (BMBF), "RUBIN-QUANTIFISENS" (FKZ: 03RU1U071J), and partially supported by the I+D+i projects INSTILL PID2020-120071RJ-I00, INNOFIBER PID2023-152314OB-I00 and NEXTPAM TED2021-131148B-I00 funded by the MICIU/AEI/10.13039/501100011033/ and by the "European Union NextGenerationEU/PRTR". D. Maldonado-Hurtado is supported by the Grant CETP 2022-00382/PCI2023-145987-2 funded by MICIU/AEI/10.13039/501100011033 and by "European Union". K.W. acknowledges funding from EIC Pathfinder Program V4F.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ambiguity-Free, Multiparametric, and Multipoint Fiber Refractometer Based on the Hilbert Transform

  • Esquivel-Hernández, Jonathan
  • Martínez-Manuel, Rodolfo
  • Valentín-Coronado, Luis M.
  • García-Miquel, Héctor
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Hilbert transform (HT) is implemented to create an unambiguous, multiparametric, and multipoint fiber refractometer in a simple and practical way. The ambiguity effect in the fiber refractometer commonly occurs between liquid samples having refractive index (RI) values below and above the RI of the fundamental mode of the fiber. Here, the phase of the signal of the fiber refractometer obtained with the help of the HT is used to remove the ambiguity issue. The sensing head is a Fabry-Perot cavity formed between a fiber Bragg grating (FBG) and the fiber tip. The amplitude of the envelope obtained by the HT is used for RI monitoring, and the phase of the HT signal is used for temperature measurement. FBGs of different wavelengths permit the multipoint characteristic, whereas the HT allows to obtain all the results from a single scan in a simple and practical way. In addition, improvement in the signal visibility is experimentally demonstrated by comparing different reflectivity of FBGs in the sensing cavities., Jonathan Esquivel-Hernandez acknowledges the Consejo Nacional de Humanidades, Ciencia y Tecnolog¿ıa (CONAHCyT), Mexico, for the support provided through the Postgraduate Scholarship under Grant 808451.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microsphere-Augmented PDMS integration in tapered FBG small-scale sensors for enhanced temperature sensitivity

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Arques-Garrigós, Lucía|||0009-0009-0605-5698
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Sánchez, Luis A.
[EN] This work presents a novel high-sensitivity temperature sensor based on a fiber Bragg grating inscribed on a tapered optical fiber which terminates in a microsphere, all embedded within a PDMS-filled silica capillary. The fabricated microsphere at the taper's end enhances PDMS traction, improving strain transfer between the polymer and the fiber during temperature changes. Different waist diameters for the tapered fiber were considered for the design of the sensor. The sensor's response was analyzed over a temperature range of 20 °C to 90 °C for taper waist diameters ranging from 60 ¿m to 20 ¿m. Experimental results demonstrate a wavelength temperature sensitivity of 47.19 pm °C¿¹ for a 60 ¿m waist diameter and 221.2 pm °C¿¹ for a 20 ¿m waist diameter, achieving up to 22 times the sensitivity of a bare FBG. The experimental results were supported by finite element analysis simulations, which showed a clear correlation between the enhanced sensitivity and the increase in axial strain applied by the PDMS on the embedded fiber. This enhancement in sensitivity was demonstrated by housing the fiber in a capillary, integrating the microsphere at the end of the fiber, and diminishing the fiber taper's diameter. Moreover, unlike traditional techniques aimed at enhancing the thermal sensitivity of fiber Bragg gratings, the sensor developed through this innovative approach exhibits enhanced performance regarding both dimensions and sensitivity., This work is partially supported by the i+D+i projects INSTILL PID2020-120071RJ-I00, INNOFIBER PID2023-152314OB-I00 and NEXTPAM TED2021-131148B-I00 funded by the MICIU/AEI/501100011033/ and by the "European Union NextGenerationEU/PRTR"; also, is partially supported by the PROMETEO 2021/015 Research Excellency Award funded by the Generalitat Valenciana. B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Theoretical and experimental analysis of inter-core crosstalk in strongly-coupled multicore fiber tapers

  • Hernández-Ambato, Valeria Katherine
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present a comprehensive theoretical model based on the coupled-mode theory, capable of analyzing the crosstalk in a multicore optical fiber taper. The novelty of our developed model lies in its ability to describe the mode coupling in strongly-coupled multicore fiber tapers, a feature not covered by previously reported models that are only suitable for weakly-coupled multicore fibers. In our approach, we consider all possible coupling interactions among both adjacent and nonadjacent cores, along with the self-coupling within each core of a homogeneous seven-core optical fiber. Moreover, we also take into account that when a homogeneous multicore fiber undergoes tapering, a propagation constant mismatch appears between the central and external cores, due to the closer proximity of the external cores to the surrounding environment. To validate our model, we implemented fiber tapers of different waist lengths and diameters in a seven-core optical fiber and compared their inter-core crosstalk with the simulated results. Unlike previous studies that only injected light into the central core, we also explored the case where the input is launched into any external core of the fiber tapers. For both scenarios, we verified that our theoretical model can describe the dynamics of mode coupling occurring in a tapered multicore fiber for a large range of waist diameters. We believe that the findings from this study could be useful for designing sensing and signal-processing devices., This research was partially supported by MCIN/AEI/10.13039/501100011033 (under I+D+i projects INSTILL PID2020-120071RJ-I00, SYNERGY PID2020-118310RB-I00, INNOFIBER PID2023-152314OBI00 and NEXTPAM TED2021-131148B-I00). Valeria HernandezAmbato was supported by Generalitat Valenciana (under grant GRISOLIAP/2020/083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interferometric temperature fiber sensor based on Hilbert Transform

  • Esquivel-Hernández, Jonathan
  • Martínez-Manuel, Rodolfo
  • Valentín-Coronado, Luis M.
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Implementation of the Hilbert Transform (HT) for temperature monitoring using an interferometric fiber sensor is presented. The method's effectiveness is confirmed through modeling, simulation, and experimental results. This approach simplifies the process of monitoring the phase of an interferometric signal from a fiber sensor. Using a Fabry-Perot interferometer as the sensing element, it is demonstrated that the HT method enables accurate temperature measurement. The results show a high sensitivity and precision, with an error margin of less than 0.1°C, demonstrating the method¿s reliability and potential for various applications., This work was supported in part by the I+D+i Projects funded by MICIU/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR under Grant INSTILL PID2020-120071RJ-I00, Grant INNOFIBER PID2023-152314OB-I00, and Grant NEXTPAMTED2021-131148B-I00; and in part by the Research Excellency Award funded by the Generalitat Valenciana under Grant PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber-optic hydrophone sensor for passive acoustic monitoring applications

  • Miralles Ricós, Ramón|||0000-0003-0039-2553
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Gosálbez Castillo, Jorge|||0000-0001-6520-9014
  • Monfort, Manuel
[EN] Fiber-Optic Hydrophones (FOHs) are starting to gain interest for Passive Acoustic Monitoring (PAM) applications. One of the fiber optic sensing technologies that has been shown to have practical applicability in harsh environments is the use of sensors based on Fiber Bragg Grating (FBG). Through the construction of a prototype and its experimental validation, it has been demonstrated that a 7 Multi-Core Fiber (MCF) adhered longitudinally to a membrane on the top of a hollow cylinder transforms acoustic pressure waves into mechanical deformations detectable by the 7 FBGs. The combination of this structure with a Deep Convolutional Neural Network based on a U-Net architecture allows to reduce the FOH noise and increase its sensitivity offering a reference framework for the design of FBG-based hydrophones in specific applications., This research was part of the project TED2021-131148B-I00 , funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU/PRTR". Funding for open access charges: CRUE-Universitat Politecnica de Valencia.