Pasar al contenido principal

INNOVATIVE SPACE-DIVISION MULTIPLEXING FIBER DEVICES UNLEASHED FOR SIGNAL PROCESSING AND SENSING

PID2023-152314OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long-Term Stability Enhancement in Multi-Cavity Optoelectronic Oscillators via Multicore Fibers

  • García-Cortijo, Sergi|||0000-0002-7237-9457
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We report a novel multi-cavity Vernier optoelectronic oscillator (OEO) approach enabled by dispersion-engineered heterogeneous multicore fibers (MCFs) to achieve broadband tunability, ultra-low phase noise, and high temporal stability. By using the Central Limit Theorem, we theoretically demonstrate that the temporal stability of the oscillation frequency improves as the number of cavities increases, with the frequency drift variance scaling inversely with the number of cavities. This key insight transcends Vernier-specific implementations, offering a universal framework for enhancing stability in multi-cavity OEOs of varying topologies. Experimental validation using a custom-fabricated 7-core MCF demonstrates up to a 75% reduction in the frequency drift standard deviation for a 7-cavity OEO compared to a dual-cavity configuration, alongside an average phase noise level of approximately -120 dBc/Hz at a 10-kHz offset. By exploiting the phase-to-intensity modulation conversion to implement a broadband radiofrequency filtering response, we reach wideband optically tunable oscillation frequency from 10 to 18 GHz enabled by the MCF dispersion characteristics. These results position MCF-based multi-cavity Vernier OEOs as a versatile platform for next-generation radar, communications, and sensing systems demanding high spectral purity, long-term operational stability, and fast wideband reconfigurability., This work was supported in part by the Spanish MICIU/AEI under project PID2023-152314OB-100, in part by Generalitat Valenciana under Project PROMETEO/2021/15 , and in part by Universitat Politecnica de Valencia PAID-10-21 fellowship for S. Garcia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Fiber Layout to the Sensor: Preparation Methods as Key Factors for High-Quality Coupled-Core-Fiber Sensors

  • Lindner, F.
  • Bierlich, J.
  • Alonso-Murias, M.
  • Flores-Bravo, J. A.
  • Villatoro, J.
  • Wondraczek, K.
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] During recent years, the optical-fiber-based simultaneous sensing of strain and temperature has attracted increased interest for different applications, e.g., in medicine, architecture, and aerospace. Specialized fiber layouts further enlarge the field of applications at much lower costs and with easier handling. Today, the performance of many sensors fabricated from conventional fibers suffers from cross-sensitivity (temperature and strain) and relatively high interrogation costs. In contrast, customized fiber architectures would make it possible to circumvent such sensor drawbacks. Here, we report on the development of a high-quality coupled-core fiber and its performance for sensors¿from the initial fiber layout via elaboration of the preform and fiber up to the sensor evaluation. A compact, high-speed, and cost-effective interrogation unit using such a specialized coupled-core fiber has been designed to monitor reflectivity changes while even being able to distinguish the direction of the force or impact. Several fiber core material techniques and approaches were investigated, which made it possible to obtain a sufficient volume of material for the required fiber core number and a specialized fiber core geometry in terms of core distances and radial refractive index profile, whilst handling the non-symmetrical fiber architectures of such modeled, complex structures and balancing resources and efforts., This work has received funding from the European Union's Horizon2020 Program for research, technological development and demonstration under Grant Agreement no. degrees 779472 ACTPHAST project (P2022-06). This work was also funded by the German Federal Ministry of Education and Research (BMBF), "RUBIN-QUANTIFISENS" (FKZ: 03RU1U071J), and partially supported by the I+D+i projects INSTILL PID2020-120071RJ-I00, INNOFIBER PID2023-152314OB-I00 and NEXTPAM TED2021-131148B-I00 funded by the MICIU/AEI/10.13039/501100011033/ and by the "European Union NextGenerationEU/PRTR". D. Maldonado-Hurtado is supported by the Grant CETP 2022-00382/PCI2023-145987-2 funded by MICIU/AEI/10.13039/501100011033 and by "European Union". K.W. acknowledges funding from EIC Pathfinder Program V4F.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ambiguity-Free, Multiparametric, and Multipoint Fiber Refractometer Based on the Hilbert Transform

  • Esquivel-Hernández, Jonathan
  • Martínez-Manuel, Rodolfo
  • Valentín-Coronado, Luis M.
  • García-Miquel, Héctor
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Hilbert transform (HT) is implemented to create an unambiguous, multiparametric, and multipoint fiber refractometer in a simple and practical way. The ambiguity effect in the fiber refractometer commonly occurs between liquid samples having refractive index (RI) values below and above the RI of the fundamental mode of the fiber. Here, the phase of the signal of the fiber refractometer obtained with the help of the HT is used to remove the ambiguity issue. The sensing head is a Fabry-Perot cavity formed between a fiber Bragg grating (FBG) and the fiber tip. The amplitude of the envelope obtained by the HT is used for RI monitoring, and the phase of the HT signal is used for temperature measurement. FBGs of different wavelengths permit the multipoint characteristic, whereas the HT allows to obtain all the results from a single scan in a simple and practical way. In addition, improvement in the signal visibility is experimentally demonstrated by comparing different reflectivity of FBGs in the sensing cavities., Jonathan Esquivel-Hernandez acknowledges the Consejo Nacional de Humanidades, Ciencia y Tecnolog¿ıa (CONAHCyT), Mexico, for the support provided through the Postgraduate Scholarship under Grant 808451.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microsphere-Augmented PDMS integration in tapered FBG small-scale sensors for enhanced temperature sensitivity

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Arques-Garrigós, Lucía|||0009-0009-0605-5698
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Sánchez, Luis A.
[EN] This work presents a novel high-sensitivity temperature sensor based on a fiber Bragg grating inscribed on a tapered optical fiber which terminates in a microsphere, all embedded within a PDMS-filled silica capillary. The fabricated microsphere at the taper's end enhances PDMS traction, improving strain transfer between the polymer and the fiber during temperature changes. Different waist diameters for the tapered fiber were considered for the design of the sensor. The sensor's response was analyzed over a temperature range of 20 °C to 90 °C for taper waist diameters ranging from 60 ¿m to 20 ¿m. Experimental results demonstrate a wavelength temperature sensitivity of 47.19 pm °C¿¹ for a 60 ¿m waist diameter and 221.2 pm °C¿¹ for a 20 ¿m waist diameter, achieving up to 22 times the sensitivity of a bare FBG. The experimental results were supported by finite element analysis simulations, which showed a clear correlation between the enhanced sensitivity and the increase in axial strain applied by the PDMS on the embedded fiber. This enhancement in sensitivity was demonstrated by housing the fiber in a capillary, integrating the microsphere at the end of the fiber, and diminishing the fiber taper's diameter. Moreover, unlike traditional techniques aimed at enhancing the thermal sensitivity of fiber Bragg gratings, the sensor developed through this innovative approach exhibits enhanced performance regarding both dimensions and sensitivity., This work is partially supported by the i+D+i projects INSTILL PID2020-120071RJ-I00, INNOFIBER PID2023-152314OB-I00 and NEXTPAM TED2021-131148B-I00 funded by the MICIU/AEI/501100011033/ and by the "European Union NextGenerationEU/PRTR"; also, is partially supported by the PROMETEO 2021/015 Research Excellency Award funded by the Generalitat Valenciana. B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature and vector bending sensing with a supermode fiber Bragg grating

  • Villatoro, J.
  • Alonso-Murias, M.
  • Zornoza, A.
  • Lindner, F.
  • Bierlich, J.
  • Wondraczek, K.
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Due to their multiple advantages, single-mode fiber Bragg gratings (FBGs) are widely used in a myriad of practical sensing applications. However, their concurrent sensitivity to strain and temperature makes a reference sensor necessary in several situations. Here, we demonstrate that a single supermode FBG can be used to measure bending and temperature. A specially designed two coupled-core optical fiber (TCCF) that supports two supermodes was fabricated in which gratings were inscribed with femtosecond or ultraviolet lasers. The interrogation of the gratings was carried out with a conventional FBG sensor interrogator. It was found that the reflection spectrum of the supermode grating depended on its inscription in the TCCF. So, it was possible to fabricate samples in which the reflection spectra exhibited two narrow peaks very close to each other with well-defined Bragg wavelengths and reflectivities. Cross sensitivities and polarization effects on the devices were studied. It was found that two Bragg wavelengths and two reflectivities provided abundant data to measure bending of the TCCF, temperature, and to discriminate in which direction the TCCF was bent. Thus, we believe that the results reported here can pave the way for next-generation grating-based specialty optical fiber devices that are capable of multi-parameter sensing. The results and approaches proposed here can also expand the use of Bragg grating technology., This work was funded in part through Projects PDC2022-133885-I00; PID2023-152763NB-I00; INNOFIBER PID2023-152314OB-I00, and SMARTMOORING Cetp-2022-00382, PCI2023-145987-2 funded by the Spanish MCIU/AEI /10.13039/501100011033 and the European Union Next Generation EU/PRTR, IT11452-22 funded by the Basque Government and P2022-06 funded by the EU Horizon2020 Actphast4R GA 825051. It is also partially supported by the Catedra Chip Fotonico UPV TSI-069100-2023-0002, and PROMETEO 2021/015 Research Excellency Award funded by the Generalitat Valenciana. M. Alonso-Murias acknowledges the support received from SECIHTI through the National Postdoctoral Stays Program (Grant No. 787628). The authors acknowledge Shrabya Shukla for her assistance in some experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Theoretical and experimental analysis of inter-core crosstalk in strongly-coupled multicore fiber tapers

  • Hernández-Ambato, Valeria Katherine
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present a comprehensive theoretical model based on the coupled-mode theory, capable of analyzing the crosstalk in a multicore optical fiber taper. The novelty of our developed model lies in its ability to describe the mode coupling in strongly-coupled multicore fiber tapers, a feature not covered by previously reported models that are only suitable for weakly-coupled multicore fibers. In our approach, we consider all possible coupling interactions among both adjacent and nonadjacent cores, along with the self-coupling within each core of a homogeneous seven-core optical fiber. Moreover, we also take into account that when a homogeneous multicore fiber undergoes tapering, a propagation constant mismatch appears between the central and external cores, due to the closer proximity of the external cores to the surrounding environment. To validate our model, we implemented fiber tapers of different waist lengths and diameters in a seven-core optical fiber and compared their inter-core crosstalk with the simulated results. Unlike previous studies that only injected light into the central core, we also explored the case where the input is launched into any external core of the fiber tapers. For both scenarios, we verified that our theoretical model can describe the dynamics of mode coupling occurring in a tapered multicore fiber for a large range of waist diameters. We believe that the findings from this study could be useful for designing sensing and signal-processing devices., This research was partially supported by MCIN/AEI/10.13039/501100011033 (under I+D+i projects INSTILL PID2020-120071RJ-I00, SYNERGY PID2020-118310RB-I00, INNOFIBER PID2023-152314OBI00 and NEXTPAM TED2021-131148B-I00). Valeria HernandezAmbato was supported by Generalitat Valenciana (under grant GRISOLIAP/2020/083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber-Optic Voltage Sensor based on Micro-Electro-Mechanical Systems for Low-Voltage Applications

  • Sanipatin-Urquizo, Bryan David
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Sánchez, Luis A.
  • Bausells, Joan
  • Torres-Herrero, Nuria
  • Zabala, Miguel
  • García-Miquel, Héctor
[EN] This work presents the design, fabrication, and characterization of a direct-current (DC) low-voltage optical fiber sensor based on micro-electro-mechanical systems (MEMS) specifically engineered for DC voltage sensing within a range of 0 ¿5 V. The device integrates a parallel-plate electrostatic actuator with a fiber-optic Fabry-Pe ¿rot interferometer to accurately detect small deflections. By leveraging the distinct advantages of MEMS technology in conjunction with optical measurement techniques, our approach addresses the challenges of miniaturization and enhances measurement sensitivity. Two main configurations were developed: one with two supports and another with four, featuring reduced dimensions and different lengths to optimize sensitivity for low-voltage applications. The principle of operation relies on measuring the separation between the MEMS reflective surface and the tip of an optical fiber, demonstrating the voltage-deflection relationship that results from the interplay of electrostatic and mechanical forces. During measurement, the variations in the cavity length consequently result in detectable shifts in the produced interference pattern. This sensor takes advantage of optical detection, presenting good stability and repeatability across multiple measurement cycles. The foursupport design proved especially effective for voltages below 2.5 V thanks to its lower initial axial stress and improved sensitivity in that range. Notably, both designs exhibit rapid response and compact dimensions, showcasing their potential to significantly advance low-voltage monitoring solutions for applications requiring precise voltage measurements in DC systems. This is particularly relevant for battery-powered devices and power electronics environments, where miniaturization is essential to meet the demands of modern technology., This work is partially supported by the I + D + I projects INNOFIBER PID2023-152314OB-I00 funded by the MICIU/AEI/501100011033/and by the "European Union" NextGenerationEU/PRTR/, the Catedra Chip Fotonico UPV (TSI-069100-2023-0002) and CEX2023-001397-M/AEI/10.13039/501100011033; Luis A. Sanchez acknowledges financial support from the "Ministerio de Ciencia, Innovacion y Uni-versidades/Agencia Estatal de Investigacion"through the Torres-Quevedo research grant PTQ2023-013004. B. Sanipatin is supported by the Catedra Chip Fotonico UPV (TSI-069100-2023-0002) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interferometric temperature fiber sensor based on Hilbert Transform

  • Esquivel-Hernández, Jonathan
  • Martínez-Manuel, Rodolfo
  • Valentín-Coronado, Luis M.
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Implementation of the Hilbert Transform (HT) for temperature monitoring using an interferometric fiber sensor is presented. The method's effectiveness is confirmed through modeling, simulation, and experimental results. This approach simplifies the process of monitoring the phase of an interferometric signal from a fiber sensor. Using a Fabry-Perot interferometer as the sensing element, it is demonstrated that the HT method enables accurate temperature measurement. The results show a high sensitivity and precision, with an error margin of less than 0.1°C, demonstrating the method¿s reliability and potential for various applications., This work was supported in part by the I+D+i Projects funded by MICIU/AEI/10.13039/501100011033/ and by the European Union NextGenerationEU/PRTR under Grant INSTILL PID2020-120071RJ-I00, Grant INNOFIBER PID2023-152314OB-I00, and Grant NEXTPAMTED2021-131148B-I00; and in part by the Research Excellency Award funded by the Generalitat Valenciana under Grant PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multicore Fiber Nonuniformly-Spaced Optical Delay Line for Microwave Signal Processing

  • González-Pérez, Mario Annier|||0000-0001-9378-2942
  • Nazemosadat, Elham|||0000-0003-1740-9737
  • Gasulla Mestre, Ivana|||0000-0001-8088-7796
[EN] We propose and experimentally demonstrate, for the first time, the use of nonuniformly-spaced optical delay lines for microwave photonic discrete-time signal processing, leveraging the spatial diversity inherent in a multicore fiber (MCF). We present the design of a novel 32-core heterogeneous MCF with a tailored chromatic dispersion profile for each core to offer tunability over a 30-nm optical wavelength range, providing flexibility for eight specific microwave signal applications. As a proof of concept, we experimentally demonstrate a nonuniformly-spaced optical delay line based on a 5-km homogeneous MCF and variable delay lines. Our results show that the time delay offsets result in additional phase shifts, leading to an effective conversion to equivalent negative coefficients, all within a compact solution. Our experimental findings include the successful implementation of a bandpass filter with a flat frequency response of around 10 GHz using 5 and 7 taps/cores. Additionally, we present a fractional Hilbert transformer with variable rho pi phase shifts at 8 GHz, validated through the temporal Hilbert transform of a Gaussian pulse. Furthermore, we showcase a microwave pulse phase encoder for Barker and Quaternary Barker sequences, demonstrating accurate encoding of the input signal and a compression ratio consistent with theoretical predictions. Overall, we introduce a compact solution for microwave photonic applications that require negative coefficients. Our approach benefits from the ability of MCFs to provide parallel distributed signal processing with a reduction of size, weight, and power consumption., This work was supported in part by ERC Consolidator under Grant 724663, in part by the Spanish Ministerio de Ciencia e Innovacion under project PID2023-152314OB-I00, project PID2020-118310RB-100 and fellowship PRE2021-099682, and in part by Generalitat Valenciana PROME-TEO/2021/15 project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fiber-optic voltage sensor based on micro-electro-mechanical systems for low-voltage applications

  • Sanipatin, Bryan
  • Sánchez, Luis Alberto
  • Bausells, Joan
  • Torres Herrero, Nuria
  • Zabala, Miguel
  • Martínez, Jorge D.
  • García-Miquel, H.
  • Sales, Salvador
This work presents the design, fabrication, and characterization of a direct-current (DC) low-voltage optical fiber sensor based on micro-electro-mechanical systems (MEMS) specifically engineered for DC voltage sensing within a range of 0–5 V. The device integrates a parallel-plate electrostatic actuator with a fiber-optic Fabry-Pérot interferometer to accurately detect small deflections. By leveraging the distinct advantages of MEMS technology in conjunction with optical measurement techniques, our approach addresses the challenges of miniaturization and enhances measurement sensitivity. Two main configurations were developed: one with two supports and another with four, featuring reduced dimensions and different lengths to optimize sensitivity for low-voltage applications. The principle of operation relies on measuring the separation between the MEMS reflective surface and the tip of an optical fiber, demonstrating the voltage-deflection relationship that results from the interplay of electrostatic and mechanical forces. During measurement, the variations in the cavity length consequently result in detectable shifts in the produced interference pattern. This sensor takes advantage of optical detection, presenting good stability and repeatability across multiple measurement cycles. The four-support design proved especially effective for voltages below 2.5 V thanks to its lower initial axial stress and improved sensitivity in that range. Notably, both designs exhibit rapid response and compact dimensions, showcasing their potential to significantly advance low-voltage monitoring solutions for applications requiring precise voltage measurements in DC systems. This is particularly relevant for battery-powered devices and power electronics environments, where miniaturization is essential to meet the demands of modern technology., This work is partially supported by the I+D+I projects INNOFIBER PID2023–152314OB-I00 funded by the MICIU/AEI/501100011033/ and by the "European Union” NextGenerationEU/PRTR/, the Cátedra Chip Fotónico UPV (TSI-069100–2023–0002) and CEX2023-001397-M / AEI/10.13039/501100011033; Luis A. Sánchez acknowledges financial support from the "Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Investigación" through the Torres-Quevedo research grant PTQ2023–013004. B. Sanipatin is supported by the Cátedra Chip Fotónico UPV (TSI-069100–2023–0002)., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2023-001397-M)., Peer reviewed