Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative characterization of gum rosins for their use as sustainable additives in polymeric matrices

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Aldás-Carrasco, Miguel Fernando
  • Hernandez Fernandez, Joaquin Alejandro
[EN] There is a growing interest in the use of non-polluting compounds, which come from renewable sources, and which performance in their scope is equivalent to their synthetic similes. In this work, five types of rosins from different sources were studied, verifying the existence of differences that can be inferred in their subsequent use and application as material additives. For the study, rosins were analyzed using gas-mass chromatographic techniques, infrared spectrophotometry (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and color characterization. The results showed that the samples are composed of either abietic acid or by its structural isomers in contents higher than 80%. FTIR shows that the main difference in the gum rosins is related to the proclivity to absorb environmental moisture and that this technique is not enough to differentiate them. Moreover, the DSC reveals that the gum rosins present enthalpy relaxation effects due to their manufacturing process. The TGA showed that gum rosins are thermally stable until 200 degrees C, therefore they can be successfully blended with thermoplastic polymers. Finally, the color characterization shows little differences between the samples, being CA the gum rosin with the greatest total color differences., CRUE-Universitat Politecnica de Valencia; Spanish Ministry of Science and Innovation, Grant/Award Number: PID2020-116496RB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recovery of (Z)-13-Docosenamide from Industrial Wastewater and Its Application in the Production of Virgin Polypropylene to Improve the Coefficient of Friction in Film Type Applications

  • Hernández-Fernández, Joaquín
  • Puello-Polo, Esneyder
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Additives play an important role in the production of plastic materials through their application, in which the mechanical, thermal, and physical properties of polymers are improved, making them last longer and be more resistant. During the synthesis of polypropylene resins, the remains of additives that are not absorbed by the resin are removed in the purification stage and end up in the wastewater. In this article, the recovery of (Z)-13-docosenamide from the wastewater from the process, its purification, and its application in the process was carried out. For the extraction of the additive, solid phase extraction (SPE) was used, and to guarantee the purity of (Z)-13-docosenamide, techniques such as high performance liquid chromatography (HPLC), Fourier transform infrared (FTIR), gas chromatography-mass spectrometry (GC/MS), thermogravimetric (TG) coupled with a gas chromatography-mass spectrometry (GC/MS), and differential scanning calorimetry (DSC) were used. The recovered erucamide was added to the PP between 0.05 and 0.3% w/w. The effects of the properties of the virgin polypropylene with the recovered additive were also evaluated to determine its effectiveness in improving the properties of the material by measuring the coefficient of friction (CoF) as well as the mechanical properties and wettability through atomic force microscopy (AFM) and the contact angle, respectively. It was discovered that using these techniques, it is possible to recover approximately 95% of the additive present in the water while keeping the material's properties within the desired limits., This research was supported by the Spanish Ministry of Science and Innovation/Validacion de los Materiales Sostenibles Obtenidos a Partir de Productos Naturales/(PDC2021-121345-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quantification and elimination of substituted synthetic phenols and volatile organic compounds in the wastewater treatment plant during the production of industrial scale polypropylene

  • Hernández-Fernández, J.
  • Barceló, Damià
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Substituted synthetic phenols and VOC as industrial waste in water and gases from a polypropylene (PP) production plant were the focus of this research. The scope of the study included two levels of the process which were: extrusion and desorber. A total of 264 samples were taken of the liquid and gas affluent and effluent. Waste water and residual gases were collected during the processing of 6 grades of PP with melt flow index of 25, 20, 15, 10, 2 and 1. The monitoring programs were carried out over the course of a year and the samples were taken at different times in order to evaluate the stability and magnitude of a possible environmental impact of the process. Five phenols were identified in the wastewater and a total of 41 VOCs were found in the gas sample. The selection of these phenols was based principally on their high consumption given the need to improve the thermo-oxidative properties of the PP. For the study of the VOC, a new methodology was developed permitting simultaneous analysis by GC-MS/PDHID/FID combining 7 valves, 8 columns and 3 detectors. In the past the wastewaters were treated with solid phase extraction cartridges and the substituted phenols were analyzed by HPLC with DAD.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of Different Sustainable Silk-Based Fillers on the Thermal and Mechanical Properties of Polylactic Acid Composites

  • Ferri, J.M|||0000-0002-1269-4973
  • E. Rayón|||0000-0002-0653-2046
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Aldas, Miguel
  • Lozano-Pérez, Antonio Abel
[EN] In this work, different silk fillers combined with maleinized corn oil (MCO), as environmentally friendly plasticizers, were used to modify the mechanical and thermal properties of polylactic acid (PLA) composites. Melt extrusion and injection were used to obtain samples with a content of 10 wt.% of MCO and 0.5 phr of different silk fillers: crushed silk (CS), silk fibroin microparticles (SFM), and silk fibroin nanoparticles (SFN). PLA formulation with 10 wt.% of MCO and 0.5 g of CS per hundred grams of composite (phr) showed the highest increase in mechanical ductile properties with an increase in elongation at break of approximately 1400%, compared with PLA. Differential scanning calorimetry (DSC) showed a decrease of 2 degrees C in their glass transition temperature with the addition of different silk fillers. In addition, SFM and SFN increase the degree of crystallinity of PLA. This increment was also confirmed by infrared spectroscopy analysis. Field emission scanning electron microscopy (FESEM) images revealed a good dispersion of the different silk fillers. Among them, PLA formulation with 10 wt.% MCO and 0.5 phr of SFN, showed an optimal balance between maximum resistance and elongation at break, with 52.0 MPa and 10.8%, respectively, improving elongation at break by 635%. Furthermore, all samples were satisfactorily disintegrated under composting conditions., This research was funded by the Spanish Research Agency (PDC2021-121345-C22.), the Spanish Ministry of Science and Innovation, (Grant No. PID2021-123753NA-C33) and partially supported (80%) by the European Commission ERDF/FEDER Operational Program Murcia CCI No. 2007ES161PO001 (Project No. 14-20/20). The research contract of Dr. J.M. Ferri was funded by Generalitat Valenciana (Grant No. APOSTD/2019/122).