Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gradient descent algorithm for the optimization of fixed priorities in real-time systems

  • Rivas, Juan M.
  • Gutiérrez, J. Javier
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
[EN] This paper considers the offline assignment of fixed priorities in partitioned preemptive real-time systems where tasks have precedence constraints. This problem is crucial in this type of systems, as having a good fixed priority assignment allows for an efficient use of the processing resources while meeting all the deadlines. In the literature, we can find several proposals to solve this problem, which offer varying trade-offs between the quality of their results and their computational complexities. In this paper, we propose a new approach, leveraging existing algorithms that are widely exploited in the field of Machine Learning: Gradient Descent, the Adam Optimizer, and Gradient Noise. We show how to adapt these algorithms to the problem of fixed priority assignment in conjunction with existing worst-case response time analyses. We demonstrate the performance of our proposal on synthetic task-sets with different sizes. This evaluation shows that our proposal is able to find more schedulable solutions than previous heuristics, approximating optimal but intractable algorithms such as MILP or brute-force, while requiring reasonable execution times., This work was partially supported by MCIN/ AEI/10.13039/ 501100011033/ FEDER Una manera de hacer Europa , Spain under grants PID2021-124502OB-C41 and PID2021-124502OB-C42 (PRESECREL), and by the Vicerrectorado de Investigación de la Universitat Politècnica de Valencia (UPV) Aid to First Research Projects , Spain under grant PAID-06-23 and PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Online Attachment Style Recognition System Based on Voice and Machine Learning

  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Parra Vargas, Elena|||0000-0002-0279-9827
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Chicchi Giglioli, Irene Alice
[EN] Attachment styles are known to have significant associations with mental and physical health. Specifically, insecure attachment leads individuals to higher risk of suffering from mental disorders and chronic diseases. The aim of this study is to develop an attachment recognition model that can distinguish between secure and insecure attachment styles from voice recordings, exploring the importance of acoustic features while also evaluating gender differences. A total of 199 participants recorded their responses to four open questions intended to trigger their attachment system using a web-based interrogation system. The recordings were processed to obtain the standard acoustic feature set eGeMAPS, and recursive feature elimination was applied to select the relevant features. Different supervised machine learning models were trained to recognize attachment styles using both gender-dependent and gender-independent approaches. The gender-independent model achieved a test accuracy of 58.88%, whereas the gender-dependent models obtained 63.88% and 83.63% test accuracy for women and men respectively, indicating a strong influence of gender on attachment style recognition and the need to consider them separately in further studies. These results also demonstrate the potential of acoustic properties for remote assessment of attachment style, enabling fast and objective identification of this health risk factor, and thus supporting the implementation of large-scale mobile screening systems., This work was supported in part by the Generalitat Valenciana under Grant ACIF/2021/187, and its funded Project Mixed reality and brain decision -REBRAND under Grant PROMETEO/2019/105, and in part by the Universitat Politecnica de Valencia under Grants PAID-10-20 and PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uninformed Teacher-Student for hard-samples distillation in weakly supervised mitosis localization

  • Fernández-Martín, Claudio
  • Silva-Rodríguez, Julio
  • Kiraz, Umay
  • Janssen, Emiel A.M.
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Background and Objective: Mitotic activity is a crucial biomarker for diagnosing and predicting outcomes for different types of cancers, particularly breast cancer. However, manual mitosis counting is challenging and time-consuming for pathologists, with moderate reproducibility due to biopsy slide size, low mitotic cell density, and pattern heterogeneity. In recent years, deep learning methods based on convolutional neural networks (CNNs) have been proposed to address these limitations. Nonetheless, these methods have been hampered by the available data labels, which usually consist only of the centroids of mitosis, and by the incoming noise from annotated hard negatives. As a result, complex algorithms with multiple stages are often required to refine the labels at the pixel level and reduce the number of false positives. Methods: This article presents a novel weakly supervised approach for mitosis detection that utilizes only image-level labels on histological hematoxylin and eosin (H&E) images, avoiding the need for complex labeling scenarios. Also, an Uninformed Teacher-Student (UTS) pipeline is introduced to detect and distill hard samples by comparing weakly supervised localizations and the annotated centroids, using strong augmentations to enhance uncertainty. Additionally, an automatic proliferation score is proposed that mimicks the pathologist-annotated mitotic activity index (MAI). The proposed approach is evaluated on three publicly available datasets for mitosis detection on breast histology samples, and two datasets for mitotic activity counting in whole-slide images. Results: The proposed framework achieves competitive performance with relevant prior literature in all the datasets used for evaluation without explicitly using the mitosis location information during training. This approach challenges previous methods that rely on strong mitosis location information and multiple stages to refine false positives. Furthermore, the proposed pipeline for hard-sample distillation demonstrates promising dataset-specific improvements. Concretely, when the annotation has not been thoroughly refined by multiple pathologists, the UTS model offers improvements of up to in mitosis localization, thanks to the detection and distillation of uncertain cases. Concerning the mitosis counting task, the proposed automatic proliferation score shows a moderate positive correlation with the MAI annotated by pathologists at the biopsy level on two external datasets. Conclusions: The proposed Uninformed Teacher-Student pipeline leverages strong augmentations to distill uncertain samples and measure dissimilarities between predicted and annotated mitosis. Results demonstrate the feasibility of the weakly supervised approach and highlight its potential as an objective evaluation tool for tumor proliferation., This work was funded by the Horizon 2020 European Union research and innovation programme under the Marie Sklodowska Curie grant agreement No 860627 (CLARIFY Project) . The work of Sandra Morales has been co-funded by the Universitat Politecnica de Valencia, Spain through the program PAID-10-20. The work of J. Silva-Rodriguez was carried out during his previous position at Universitat Politecnica de Valencia. This work was partially funded by Generalitat Valenciana through project CIPROM/2022/20 and with Ayuda a Primeros Proyectos de Investigacion (PAID-06-23) , Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia. Funding for open access charge: Universitat Politecnica de Valencia (PAID-12-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Toughness of Polylactide by Binary Blends with Polycarbonate with Glycidyl and Maleic Anhydride-Based Compatibilizers

  • Tejada-Oliveros, Ramon
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This work reports on the development of polylactide (PLA) and polycarbonate (PC) blends with different compatibilizers with enhanced toughness. Since both polymers are immiscible, two types of compatibilizers are tested: petrochemical-based copolymers Xibond 160 and Xibond 920 with maleic anhydride and epoxy groups, respectively, and natural-based compatibilizers with the same functionalities, namely maleinized linseed oil (MLO) and, epoxidized linseed oil (ELO). Mechanical, thermal, and morphological characterization shows better properties for the PLA/PC (80/20 wt%) blends with chemically modified natural oils (ELO and MLO). The addition of 5 phr (parts per hundred resin) of MLO gives the maximum values for impact strength and elongation at break. Moreover, the glass transition temperature (Tg) slightly decreases with the addition of natural compatibilizers, thus showing some plasticization effect. Petroleum-derived compatibilizers give interesting results regarding tensile strength and stiffness without plasticization. PLA/PC blends show higher thermal stability than neat PLA, regardless of the compatibilizer used, since PC is much more thermally stable than PLA. The obtained results indicate that both petroleum-based and natural-derived compatibilizers positively contribute to enhance the properties of the binary PLA/PC blends. Nevertheless, the results with MLO suggest this is an interesting biobased solution to provide increased toughness to PLA/PC blends., L.Q.-C. wants to thank Universitat Politècnica de València for his postdoctoral PAID-10-20 grant from (SP20200073). J.G.-C. wants to thank Universitat Politècnica de València for his FPI grant from (SP20200080). This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project number MAT2017-84909-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter uncertainty modeling for multiobjective robust control design. Application to a temperature control system in a proton exchange membrane fuel cell

  • Veyna-Robles, Uriel
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] Advanced control systems are tuned using dynamic models and optimization techniques. This approach frequently involves satisfying multiple conflicting objectives. Tuning robust controllers requires considering a framework that represents the system uncertainties, and its definition is not a trivial task. When dealing with a nonlinear model with many parameters, a high-quality representation requires a massive sampling of variations. In many cases, this represents an inaccessible computational cost for the optimization process. This work presents a new methodology for parameter uncertainty modeling that is oriented to tuning robust controllers based on multiobjective optimization techniques. The uncertainty modeling formulated represents a feasible computational cost and leads to robust solutions without attributing excessive conservatism. The novelty of this process consists in using the multiobjective space to define a set of scenarios with highly representative properties of the global uncertainty framework that formulate the control problem under a predefined minimization strategy. To demonstrate the effectiveness of this methodology, we present a temperature control design in a micro-CHP system under worst-case minimization. Based on the results, particular interest is given to verifying the appropriate formulation of the uncertainty modeling, which represents a 92.8% reduction of the computational cost involved in solving the robust optimization problem under a global uncertainty framework., This work was supported in part by grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; by grant SP20200109 (PAID-10-20) funded by Universitat Politecnica de Valencia; and by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future"; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Técnicas de planificación para optimizar el rendimiento de los sistemas de tiempo real multiprocesador, Scheduling techniques for optimising the performance of multicore real-time systems

  • Aceituno, José María
  • Pereira, Carlos Eduardo
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Multicore systems emerged as an alternative to traditional monocore systems. Although these systems possess high performance, they have more complexity. Moreover, their performance can be degraded because shared hardware resources introduce scheduling delays. To reduce this delay or contention, there are several techniques that can be applied both when allocating tasks to cores and when scheduling tasks within each core. In this paper, we propose a scheduling algorithm that combines different known scheduling policies to obtain a temporal plan that reduces the interference. In addition, we propose an artificial neural network to predict which allocation policy should be applied to minimize the length of the intervals that compose the temporal plan and thus reduce the scheduling complexity of each interval., [ES] Los sistemas multinúcleo surgieron como alternativa y mejora a los tradicionales sistemas mononúcleo. Aunque el rendimiento de estos sistemas es mayor, poseen más complejidad. Además, su rendimiento puede verse degradado debido a que los recursos hardware compartidos introducen retrasos en la planificación. Para reducir este retraso o contención existen diversas técnicas, que se pueden aplicar tanto a la hora de alojar las tareas en los núcleos como al planificar las tareas dentro de cada núcleo. En este trabajo se propone un algoritmo de planificación que combina distintas políticas de planificación conocidas para obtener un plan temporal que posea una menor interferencia. Además, se propone una red neuronal artificial para predecir qué política de alojamiento se debe aplicar para minimizar la longitud de los intervalos que forman el plan temporal y así reducir la complejidad de planificación de cada intervalo., Esta publicación es parte del proyecto de I+ D+ i PLEC2021-007609 financiado por MCIN/ AEI/ 10.13039/501100011033 y por Unión Europea NextGenerationEU / PRTR y del proyecto de I+ D + i PID2021-124502OB-C41, financiado por MCIN/ AEI/10.13039/501100011033. También ha sido financiado por PAID-10-20 (Universitat Politècnica de València)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Allocation algorithms for multicore partitioned mixed-criticality real-time systems

  • Ortiz-Enguix, Luis|||0009-0002-1376-0650
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[EN] Multicore systems introduced a performance increase over previous monocore systems. As these systems are increasingly finding application in critical domains, it arises a necessity to develop novel methodologies for their efficient resource allocation. In addition, it is particularly important to consider the criticality of applications when scheduling such systems. In multicore systems, scheduling also includes the allocation of tasks to cores. In architectures based on spatial and temporal partitioning, it is also necessary to allocate partitions. Consideration of all these variables when scheduling a critical multicore partitioned system is a major challenge. In this article, a hypervisor partitioned framework for mixed-criticality systems is proposed. In this sense, the allocation process has been split in two different parts. The initial phase will allocate tasks to partitions according to the criticality of the system. This is achieved through the implementation of a Mixed- Integer Linear Programming (MILP) algorithm. The second phase involves the allocation of tasks to cores, employing both, an additional MILP algorithm and a modified worst fit decrease utilisation approach. Experimental results show that the combination of both strategies leads to feasible scheduling and, in addition, to a reduction of the overhead introduced by the hypervisor., This work was supported by Grant PID2021-124502OB-C41 funded by MCIN/AEI/10.13039/501100011033 and, by "ERDF A way of making Europe", by the "European Union". This work was also supported by PAID-10-20 (UPV). There was no additional external funding received for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fusocelular skin dataset with whole slide images for deep learning models

  • del Amor, Rocío
  • López-Pérez, Miguel|||0000-0003-2965-0624
  • Meseguer-Esbrí, Pablo|||0000-0001-7821-6168
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Terradez, Liria
  • Aneiros-Fernandez, Jose
  • Mateos, Javier
  • Molina, Rafael
[EN] Cutaneous spindle cell (CSC) lesions encompass a spectrum from benign to malignant neoplasms, often posing significant diagnostic challenges. Computer-aided diagnosis systems offer a promising solution to make pathologists' decisions objective and faster. These systems usually require large-scale datasets with curated labels for effective training; however, manual annotation is time-consuming and expensive. To overcome this challenge, crowdsourcing has emerged as a popular and valuable strategy to scale up the labeling process by distributing the effort among different non-expert annotators. This work introduces AI4SkIN, the first public dataset Whole Slide Images (WSIs) for CSC neoplasms, annotated using an innovative crowdsourcing protocol. AI4SkIN dataset contains 641 Hematoxylin and Eosin stained WSIs with multiclass labels from both expert and trainee pathologists. The dataset improves CSC neoplasm diagnosis using advanced machine learning and crowdsourcing based on Gaussian Processes, showing that models trained on non-expert labels perform comparably to those using expert labels. In conclusion, we illustrate that AI4SkIN provides a good resource for developing and validating methods for multiclass CSC neoplasm classification., This work has received funding from the Spanish Ministry of Economy and Competitiveness through project PID2019-105142RB-C21 and PID2019-105142RB-C22 (AI4SkIN) and PID2022-140189OB-C21 and PID2022-140189OB-C22 (ASSIST), and Generalitat Valenciana through project COM-TACTS2 (CIPROM/2022/20). The work of Rocio del Amor was supported by the Spanish Ministry of Universities (FPU20/05263). The work of Pablo Meseguer was funded by valgrAI - Valencian Graduate School and Research Network of Artificial Intelligence. The work of Sandra Morales was co-funded by the Universitat Politecnica de Valencia through the program PAID-10-20. The work of M. Lopez-Perez was supported by the grant JDC2022-048318-I funded by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Annotation protocol and crowdsourcing multiple instance learning classification of skin histological images: The CR-AI4SkIN dataset

  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Pérez-Cano, Jose
  • López-Pérez, Miguel
  • Terradez, Liria
  • Aneiros-Fernandez, Jose
  • Mateos, Javier
  • Molina, Rafael
[EN] Digital Pathology (DP) has experienced a significant growth in recent years and has become an essential tool for diagnosing and prognosis of tumors. The availability of Whole Slide Images (WSIs) and the implementation of Deep Learning (DL) algorithms have paved the way for the appearance of Artificial Intelligence (AI) systems that support the diagnosis process. These systems require extensive and varied data for their training to be successful. However, creating labeled datasets in histopathology is laborious and time-consuming. We have developed a crowdsourcing-multiple instance labeling/learning protocol that is applied to the creation and use of the CR-AI4SkIN dataset.2 CR-AI4SkIN contains 271 WSIs of 7 Cutaneous Spindle Cell (CSC) neoplasms with expert and non-expert labels at region and WSI levels. It is the first dataset of these types of neoplasms made available. The regions selected by the experts are used to learn an automatic extractor of Regions of Interest (ROIs) from WSIs. To produce the embedding of each WSI, the representations of patches within the ROIs are obtained using a contrastive learning method, and then combined. Finally, they are fed to a Gaussian process-based crowdsourcing classifier, which utilizes the noisy non-expert WSI labels. We validate our crowdsourcing-multiple instance learning method in the CR-AI4SkIN dataset, addressing a binary classification problem (malign vs. benign). The proposed method obtains an F1 score of 0.7911 on the test set, outperforming three widely used aggregation methods for crowdsourcing tasks. Furthermore, our crowdsourcing method also outperforms the supervised model with expert labels on the test set (F1-score = 0.6035). The promising results support the proposed crowdsourcing multiple instance learning annotation protocol. It also validates the automatic extraction of interest regions and the use of contrastive embedding and Gaussian process classification to perform crowdsourcing classification tasks., This work has received funding from the Spanish Ministry of Economy and Competitiveness through project PID2019-105142RB-C21 (AI4SKIN) and Spanish Ministry of Science and Innovation through project PID2022-140189OB-C22, from Horizon 2020, the European Union's Framework Programme for Research and Innovation, under the grant agreement No. 860627 (CLARIFY) , grant B-TIC-324-UGR20 funded by Consejeria de Universidad, Investigacion e Innovacion (Junta de Andalucia) and by "ERDF A way of making Europe", and GVA through the project INNEST/2021/321 (SAMUEL) . The work of Rocio del Amor has been supported by the Spanish Ministry of Universities (FPU20/05263) . The work of Miguel Lopez Perez has been supported by the University of Granada postdoctoral program "Contrato Puente". The work of Sandra Morales has been co-funded by the Universitat Politecnica de Valencia through the program PAID-10-20.r Union's Framework Programme for Research and Innovation, under the grant agreement No. 860627 (CLARIFY) , grant B-TIC-324-UGR20 funded by Consejeria de Universidad, Investigacion e Innovacion (Junta de Andalucia) and by "ERDF A way of making Europe", and GVA through the project INNEST/2021/321 (SAMUEL) . The work of Rocio del Amor has been supported by the Spanish Ministry of Universities (FPU20/05263) . The work of Miguel Lopez Perez has been supported by the University of Granada postdoctoral program "Contrato Puente". The work of Sandra Morales has been co-funded by the Universitat Politecnica de Valencia through the program PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Evolution of Sea Water Quality in the Spanish Coast from Satellite Images before and during a Confinement Period

  • Parra-Boronat, Mar
  • Parra, Lorena
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Satellite imaging, a form of remote sensing, can be used to analyse water quality, which must be monitored for proper and sustainable environmental management. This paper studies the effect of a sea traffic reduction in the Alboran Sea (Spain), analysing the changes in water quality before (from February 3rd, 2020) and during (until June 22nd, 2020) a confinement period. This was an unprecedented event in modern times and brought an interesting opportunity to study dynamics when the human impact is reduced. The study of these dynamics and the concentration levels with little human effect is important for environmental conservation purposes. We applied already existing indices using ArcGIS and ACOLITE to determine the following environmental parameters: colored dissolved organic matter (CDOM), suspended particulate matter (SPM), chlorophyll-a (Chl-a), and harmful algal blooms (HABs). Prequarantine concentration levels can reach up to 4 a(CDOM)440 (CDOM), 18 g/m(3) (SPM), and 100 mu g/L (Chl-a). Most prequarantine days presented an increment in either concentration level or distribution from the day before. The effects a sudden human impact has on an ecosystem which experimented reduced human influence for months were shown. On the day before the said impact (June 12th), three of the parameters were barely detected with concentration levels of mostly 2 a(CDOM)440 (CDOM), 6 g/m(3) (SPM), and 25 mu g/L (Chl-a), and sparse distribution. Afterwards (June 22nd), their levels went up to 4 a(CDOM)440 (CDOM), 14 g/m(3) (SPM), and 1000 mu g/L (Chl-a) and were distributed near the ports. The results presented in this study show that the main drivers of change when human impact was reduced were climatologic events (such as storms). Nevertheless, the importance of the human facto can be seen through the CDOM, SPM, and Chl-a plume near port areas observed the day after port activity was reactivated, June 22nd., This research was funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR; by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04; and by Universitat Politecnica de Valencia through Program PAID-01-20 and PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using Diffusion Models for Data Augmentation on Limited Rodent OCT Datasets

  • García-Torres, Fernando|||0000-0002-5337-8774
  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Barroso, Álvaro
  • Kemper, Björn
  • Schnekenburger, Jürgen
[EN] Optical coherence tomography (OCT) has transformed ophthalmology by enabling accurate diagnosis of retinal diseases. OCT in rodents is used in research studies of ophthalmic diseases and treatment evaluation. However, the scarcity of data limits the effectiveness of deep learning models for this purpose. This study explores the use of synthetic data generation to improve deep learning models for OCT image analysis from rodent retinas. To address this, the research leverages advanced class-conditional generative models to create high-quality synthetic images of ex-vivo rodent retinas embedded in two different mediums (solid resin and liquid media) with a reduced initial database. The conditional Denoising Diffusion Probabilistic Model (DDPM) proved to be the best model, as it produces more realistic images that closely mimic the characteristics of real rodent retinal scans. By augmenting the training datasets with these synthetic images, the performance of deep learning models in segmenting retinal layers improved by 7%. This approach reduces reliance on scarce biological samples and animal testing, promoting ethical research practices while improving the accuracy and efficiency of AI-driven medical diagnostics. The integration of synthetic data generation represents a significant advance in medical imaging, offering a scalable solution to data scarcity, generating reliable samples in two mediums and promoting the development of more robust and accurate diagnostic tools., This work has received funding from Horizon Europe, the European Union s Framework Programme for Research and Innovation, under Grant Agreement No. 101070062 (SEQUOIA). Generalitat Valenciana partially funded this work through project CIPROM/2022/20. The work of Sandra Morales has been cofunded by the Universitat Polit`ecnica de Val`encia, Spain through the program PAID10-20. The work of Rocio del Amor has been supported by the Spanish Ministry of Universities under an FPU Grant (FPU20/05263).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of Solanum pimpinellifolium genome regions for increased resilience to nitrogen deficiency in cultivated tomato

  • Renau-Morata, Begoña
  • Carrillo, Laura
  • Gil Vilar, D.
  • Martí, Raul
  • Jiménez-Gómez, José María
  • Medina, Joaquín
  • Cebolla Cornejo, Jaime|||0000-0002-2607-9920
  • GRANELL RICHART, ANTONIO|||0000-0003-4266-9581
  • Monforte Gilabert, Antonio José|||0000-0003-3461-3094
  • Molina Romero, Rosa Victoria|||0000-0001-9922-1185
  • Nebauer, Sergio G.|||0000-0001-7978-6680
[EN] High-quality crop production with minimal fertilizer inputs is a key goal for the agriculture of the future. Globally, tomato is one of the most important vegetable crops and its intensive production and breeding has been based on the application of large quantities of nitrogen (N) fertilizers. Therefore, the development of N use efficient (NUE) cultivars with low N inputs needs to be addressed. Some variability in plant growth, fruit quality and NUE traits among tomato ( Solanum lycopersicum L.) varieties under low N supply has been reported, however, the relevance of wild relatives of tomato has not yet been assessed. In this study, we found that S. pimpinellifolium accession To-937 (SP) may be a suitable resource to increase NUE in tomato. We studied a set of 29 introgression lines (IL) from SP into the Moneymaker cultivar (MM) in different seasons to investigate the potential of SP introgressions to maintain the tomato plant performance during the growth cycle under low N input in greenhouse conditions. We identified specific regions in the SP genome, on chromosomes 1, 3 and 10, involved in the responses to N inputs of fruit production and fruit quality. Notably, the line SP_10-4 maintained vegetative biomass and fruit yield production under limiting N supply. The introgressed region contained putative candidate genes as sucrose phosphate phosphatase ( SPP ), invertases (INV) and glutamine synthase 1 ( GS1 ) genes, implicated in C and N metabolism. Genomic and expression analyses revealed differences in coding and non-coding sequences as well as in mRNA levels in SP_10-4, suggesting that these genes might well contribute to the reported biomass responses to N. Additionally, line SP_1-4 showed stable fruit amino acid contents under both sufficient and limiting N supplies, indicating that assimilated N partitioning to the fruit is maintained in response to N. Altogether, our results confirmed the suitability of SP as a source of NUE related traits and the interest in the studied ILs for developing new tomato cultivars with improved NUE under sustainable fertilization conditions., This work was supported by the Ministerio de Ciencia e Innovacion (MCIN) and the Agencia Estatal de Investigacion (grants RTA2015-00014-c02-00 to SGN and JM, PID2020-114165RR-C21 to JM, and PID2022-136541OB-I00 to SGN), the Agroalnext program (MCIN with funding of NextGenEU-PRTR-C17.I1 Generalitat Valenciana AGROALNEXT/2022/056 to SGN), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-21 to SGN; PAID-10-20 and PAID-PD-22 to RM), Ministerio de Ciencia e Innovacion (TED2021-129296B-I00 to SGN) and European Commission H2020 research and innovation program through HARNESSTOM grant agreement no. 101000716 (to AG) and RoxyCOST CA18210 for networking activities (to AG). We also want to acknowledge the "Severo Ochoa Program for Centers of Excellence in R&D" (CEX2020-000999-S) supported by MCIN/AEI/10.13039/501100011033. We thank Mike Bennett for revising the English language and Javier Forment from the IBMCP Bioinformatics service for support on genomic analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comparison of Archiving Strategies for Characterization of Nearly Optimal Solutions under Multi-Objective Optimization

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] In a multi-objective optimization problem, in addition to optimal solutions, multimodal and/or nearly optimal alternatives can also provide additional useful information for the decision maker. However, obtaining all nearly optimal solutions entails an excessive number of alternatives. Therefore, to consider the nearly optimal solutions, it is convenient to obtain a reduced set, putting the focus on the potentially useful alternatives. These solutions are the alternatives that are close to the optimal solutions in objective space, but which differ significantly in the decision space. To characterize this set, it is essential to simultaneously analyze the decision and objective spaces. One of the crucial points in an evolutionary multi-objective optimization algorithm is the archiving strategy. This is in charge of keeping the solution set, called the archive, updated during the optimization process. The motivation of this work is to analyze the three existing archiving strategies proposed in the literature (ArchiveUpdateP(Q,epsilon)D(xy), Archive_nevMOGA, and targetSelect) that aim to characterize the potentially useful solutions. The archivers are evaluated on two benchmarks and in a real engineering example. The contribution clearly shows the main differences between the three archivers. This analysis is useful for the design of evolutionary algorithms that consider nearly optimal solutions., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spain) (grant number RTI2018-096904-B-I00), by the Generalitat Valenciana regional government through project AICO/2019/055 and by the Universitat Politecnica de Valencia (grant number SP20200109).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Cobalt Doping on The Structural, Linear and Nonlinear Optical Parameters of Manganese Oxide Thin Layers

  • Rossi, Zaid
  • Ghannam, Hajar
  • Brioual, Bilal
  • Zanouni, Mohamed
  • Diani, Mustapha
  • Aouni, Abdesamad
  • Ullah, Shafi
[EN] In this study, undoped and cobalt-doped manganese oxide Co:Mn3O4 (0, 2, and 4 at%) are elaborated by the spray pyrolysis procedure on glass substrates. The effect of cobalt doping concentrations on the structural, morphological, and optical features (linear and nonlinear) are investigated through the X-ray diffractometer, Raman spectroscopy, Scanning Electron Microscopy with an attached energy dispersive X-ray and UV-Vis-NIR spectrophotometer. The XRD investigations exhibit a polycrystalline tetragonal structure for all Co:Mn3O4 and confirm by Raman results with the distinctive tetragonal mode A(1g) at 657 cm(-)(1). The SEM images show an increase in roughness as cobalt doping concentration increases. The EDS quantitative analysis revealed the presence of manganese, oxygen, and cobalt. Furthermore, the optical investigation is pursued firstly through the linear optical that showed a decrease in the transmittance, and optical band gap energy as the cobalt concentration increased due to oxygen vacancies and defects and the increase of refractive index from 2.05 to 2.21. Second, the nonlinear optical parameters show a high value of the nonlinear refractive index 3.75 x 10(-7) (esu) and the third-order susceptibility chi(3) = 2.2 x 10(-8)(esu) of Co:Mn3O4(2at%). These values put the Co:Mn3O4(2at%) thin layer as a candidate in the optoelectronic applications as a third-order nonlinear medium., One of the authors Shafi Ullah Acknowledge the postdoctoral contract supported by the, RRHH, postdoctoral contract (Grant Number PAID-10-20), and Ministerio de Economia y Competitividad (Grant Number PID 2019107137 RB-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

  • Dolza, Celia
  • Fages, Eduardo
  • Gonga, Eloi
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] Environmentally friendly wood plastic composites (WPC) with biobased high density polyethylene (BioHDPE) as the polymer matrix and hemp, flax and jute short fibers as natural reinforcements, were melt-compounded using twin-screw extrusion and shaped into pieces by injection molding. Polyethylene-graft-maleic anhydride (PE-g-MA) was added at two parts per hundred resin to the WPC during the extrusion process in order to reduce the lack in compatibility between the lignocellulosic fibers and the non-polar polymer matrix. The results revealed a remarkable improvement of the mechanical properties with the combination of natural fibers, along with PE-g-MA, highly improved stiffness and mechanical properties of neat BioHDPE. Particularly, hemp fiber drastically increased the Young¿s modulus and impact strength of BioHDPE. Thermal analysis revealed a slight improvement in thermal stability with the addition of the three lignocellulosic fibers, increasing both melting and degradation temperatures. The incorporation of the fibers also increased water absorption due to their lignocellulosic nature, which drastically improved the polarity of the composite. Finally, fire behavior properties were also improved in terms of flame duration, thanks to the ability of the fibers to form char protective barriers that isolate the material from oxygen and volatiles., : This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project number MAT2017-84909-C2-2-R. AITEX wants to thank the European Regional Development Fund (ERDF) from the European Union for co-funding the project NABITEX Innovative technical textiles based on SUDOE natural fibers to be applied in Habitat Sector through the Interreg SUDOE Program (SOE2/P1/P0524). L.Q.-C. wants to thank Universitat Politècnica de València for his post-doctoral PAID-10-20 grant from (SP20200073). J.G.-C. wants to thank Universitat Politècnica de València for his FPI grant from (SP20200080).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An intrinsic electrical conductivity study of perovskite powders MAPbX3 (X = I, Br, Cl) to investigate its effect on their photovoltaic performance

  • Ullah, Shafi
  • Marí, B.|||0000-0003-0001-419X
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Andrio, Andreu
  • Marí-Guaita, Julia
  • Ullah, Hanif
  • Méndez-Blas, Antonio
  • del Castillo Vázquez, Roxana M.
[EN] An investigation into the intrinsic electrical conductivity of perovskite powders MAPbX(3), where X represents iodine (I), bromine (Br), or chlorine (Cl), was conducted to explore its impact on their photovoltaic performance. Results revealed that MAPbCl(3) demonstrated light absorption ability in the ultraviolet and visible regions, while MAPbBr(3) showed capacity for light absorption at longer wavelengths in the visible spectrum. On the other hand, MAPbI(3) exhibited good absorption at longer wavelengths, indicating its ability to absorb light in the near-infrared region. The optical bandgap of each perovskite was determined to be 2.90 eV for MAPbCl(3), 2.20 eV for MAPbBr(3), and 1.47 eV for MAPbI(3). The electrical conductivities of these powders were measured in-plane using the four-probe method and through-plane by electrochemical impedance spectroscopy (EIS). Electrochemical impedance spectroscopy (EIS) studies revealed a significant change in the conductivity of the MAPbI(3) perovskite at temperatures between 80 degrees C and 100 degrees C. This change could be attributed to structural modifications induced when the temperature exceeds these values. The through-plane conductivity changed from 3 x 10(-8) S cm(-1) at 60 degrees C to approximately 6 x 10(-5) S cm(-1) at 120 degrees C and around 2 x 10(-3) S cm(-1) at 200 degrees C. Meanwhile, the sheet conductivity (in-plane conductivity) measurements performed at ambient temperature reveal that sheet conductivities are 489 x 10(3) S m(-1), 486 x 10(3) S m(-1) and 510 x 10(3) S m(-1) for MAPbBr(3), MAPbCl(3) and MAPbI(3), respectively. This study provides valuable insights for optimizing the performance of perovskite solar cells. Understanding how dopants influence the electrical conductivity and photovoltaic properties of the perovskite material, this work will enable researchers to design and engineer more efficient and stable solar cell devices based on MAPbX(3) perovskites., The author Shafi Ullah acknowledges the post-doctoral contract supported by the RRHH (Human Resources for Research) program, postdoctoral contract (PAID-10-20) Universitat Politecnica de Valencia (UPV), and Ministerio de Economia y Competitividad under Grant Number PID 2019-107137 RB-C21. Antonio Mendez-Blas acknowledges CONACYT, Mexico (Sabbatical Grant 2022) and VIEP-BUAP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The whole-body motor skills of children with autism spectrum disorder taking goal-directed actions in virtual reality

  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Mantovani, Fabrizia
  • Sirera, Marian
  • Abad, Luis
  • Cervera-Torres, Sergio
  • Gómez-García, Soledad
  • Chicchi Giglioli, Irene Alice
[EN] Many symptoms of the autism spectrum disorder (ASD) are evident in early infancy, but ASD is usually diagnosed much later by procedures lacking objective measurements. It is necessary to anticipate the identification of ASD by improving the objectivity of the procedure and the use of ecological settings. In this context, atypical motor skills are reaching consensus as a promising ASD biomarker, regardless of the level of symptom severity. This study aimed to assess differences in the whole-body motor skills between 20 children with ASD and 20 children with typical development during the execution of three tasks resembling regular activities presented in virtual reality. The virtual tasks asked to perform precise and goal-directed actions with different limbs vary in their degree of freedom of movement. Parametric and non-parametric statistical methods were applied to analyze differences in children's motor skills. The findings endorsed the hypothesis that when particular goal-directed movements are required, the type of action could modulate the presence of motor abnormalities in ASD. In particular, the ASD motor abnormalities emerged in the task requiring to take with the upper limbs goal-directed actions with low degree of freedom. The motor abnormalities covered (1) the body part mainly involved in the action, and (2) further body parts not directly involved in the movement. Findings were discussed against the background of atypical prospective control of movements and visuomotor discoordination in ASD. These findings contribute to advance the understanding of motor skills in ASD while deepening ecological and objective assessment procedures based on VR., This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness-funded project T-EYE: Monitoring system for children with ASD based on artificial intelligence and physiological measures (IDI-20201146), and by the project funded by the Ministry of Science and Innovation of Spain ADAPTEA (PID2020- 116422RB-C21). It was also co-founded by the European Union through the Operational Program of the European Regional development Fund (FEDER) of the Valencian Community 2014 2020 (IDIFEDER/2018/029 and IDIFEDER/2021/038). Furthermore, MM received funding by the Valencian Community (GRISOLIAP/2019/137 and CIBEFP/2021/38), and by the Polytechnic University of Valencia (Predoctoral Mobility Grant of 2021). LG-Z received partial funding from the Valencian Community (ACIF/2021/187). JM-M received partial funding from the Polytechnic University of Valencia (PAID-10-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel compositional engineering for ~26% efficient CZTS-perovskite tandem solar cell

  • Aamir Shafi, Muhammad
  • Khan, Laiq
  • Shafi, Muhammad Yasir
  • Ullah, Hanif
  • Ullah, Shafi
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] The production and commercialization of solar cells should meet such social criteria as price affordability, environment friendly, stability, and high efficiency of established materials.Various solar cells have been suggested and investigated in the past; but in this work, CZTS-Pemvskite tandem solar cell having a model "CZTS/PSC/CZTS/ZnO/FTO" was taken from the reported work as a reference. Furthermore, inserting the CdS as a buffer layer with the new model, "CZTS/ PSC/CZTS/CdS/ZnO/FTO" was simulated with SCAPS-1D software. Moreover, it was observed that the effect of CdS enhanced the tandem device efficiency from the base case of 22.57% without the CdS buffer layer to 25.95% with CdS and carried out further optimizations. This improvement is beneficial for CZTS-Perovskite tandem solar cells. The J-V characteristics curve and energy band diagram was generated using this model. Later on, with this new model, the effect of the thickness of CZTS layer on the solar cell's performance was investigated. So, the thickness also significantly affected the characteristic parameters of the solar cell as well as the J-V characteristics curve. Hence, a photo-conversion efficiency of 25.95% with Voc 1.18 V, Jsc 24.79 mA/cm(2) and FF 88.36%, the obtained results demonstrating that the proposed CZTS-perovskite tandem solar cell may concrete the way for the production of low-cost and more efficient photovoltaic applications., The work was supported by Higher Education Commission of Pakistan, International Research Support Initiative Program (IRSIP) under grant No: 1-8/HEC/HRD/2020/10744 PIN: IRSIP 45 Engg 17. Author Amal Bouich acknowledged the Post-doctoral contract supported by the, RRHH, Postdoctoral contract the Margarita Salas financed with union European Next Generation EU. Author Shafi Ullah acknowledged the post-doctoral contract supported by the, RRHH, postdoctoral contract (PAID-10-20) , and Ministerio de Economia y Competitividad (Grant Number PID2019-107137RB-C21) , Universitat Politecnica de Vale`ncia (UPV) Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predicting decision-making in virtual environments: an eye movement analysis with household products

  • Palacios-Ibáñez, Almudena
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Contero, Manuel|||0000-0002-6081-9988
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] Understanding consumer behavior is crucial for increasing the likelihood of product success. Virtual Reality head-mounted displays incorporating physiological techniques such as eye-tracking offer novel opportunities to study user behavior in decision-making tasks. These methods reveal unconscious or undisclosed consumer responses. Yet, research into gaze patterns during virtual product evaluations remains scarce. In this context, an experiment was conducted to investigate users¿ gaze behavior when evaluating their preferences for 64 virtual prototypes of a bedside table. Here, 24 participants evaluated and selected their preferred design through eight repeated tasks of an 8-AFC, with individual evaluations conducted for each design to ensure the reliability of the findings. Several eye-tracking metrics were computed (i.e., gaze time, visits, and time to first gaze), statistical tests were applied, and a Long Short-Term Memory model was created to recognize decisions based on attentional patterns. Our results revealed that the Gaze Cascade Model was replicated in virtual environments and that a correlation between product liking and eye-tracking metrics exists. We recognize subjects¿ decisions with a 90% accuracy, based on their eye patterns during the three seconds before their decision. The results suggest that eye-tracking can be an effective tool for decision-making prediction during product assessment in virtual environments., This work was funded by: (1) Spanish Ministry of Education and Vocational Training [FPU19/03878]; (2) Universitat Politècnica de València, grant for mobility of doctoral students [call for applications 2021]; and (3) Universitat Politècnica de València [PAID-10-20].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of CZTS kesterite by pH adjustment in order to improve the performance of CZTS thin film for photovoltaic applications

  • Aamir Shafi, Muhammad
  • Khan, Laiq
  • Ullah, Hanif
  • Ullah, Shafi
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Quaternary CZTS (Cu2ZnSnS4) kesterite thin layers were successfully made by electrochemical deposition method. CZTS thin layers were deposited on Indium Tin Oxide (ITO) from an aqueous solution. In this work, the effects of pH adjustment under ambient conditions of CZTS thin films were studied. The as grown samples were investigated by numerous existing characterization systems. The X-ray diffraction (XRD) proves the polycrystalline description of the layer. The average crystallite size is varying from 10 nm to 24 nm of the films is dependent on the pH of the solution. All the thin films are in the CZTS kesterite phase attributed to A(1) mode at 334 cm(-1) verified by Raman spectroscopy. The SEM and AFM study show that the pH variation of the so-lution improved the surface morphology and topography of the CZTS thin films which increase several nm in grain size. Moreover, the optical analysis indicates a suitable band gap in the range of 1.5-1.8 eV depending upon the sulfurization temperature. It is found that the pH variation affects both the stability and the performance of the high-quality CZTS absorber layer applications. The CZTS layer with 4.80 pH was annealed at 450 degrees C and 500 degrees C, and at these temperatures the band gap was varied. At the end the band gap variations effect on the performance of CZTS based solar cell is being analyzed by using a simulation tool SCAPS-1D., Author Sha fi Ullah acknowledged the post -doctoral contract supported by the, RRHH, postdoctoral contract (PAID-10-20), and Ministerio de Economia y Competitividad (Grant Number PID2019-107137RB-C21) , Universitat Politècnica de València (UPV) Spain. Author Amal Bouich acknowledged the Post -doctoral contract supported by the, RRHH, Postdoctoral contract the Margarita Salas fi nanced with union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The author Muhammad Aamir Sha fi acknowledge the Higher Education Commission of Pakistan, International Research Support Initiative Program (IRSIP) , for grant No: 1-8/HEC/HRD/2020/10744 PIN: IRSIP 45 Engg 17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable cultivation of melon landraces: effects of grafting on the accumulation of flavor-related compounds

  • Flores-León, Alejandro
  • Gisbert, Carmina|||0000-0002-4620-1065
  • Cebolla Cornejo, Jaime|||0000-0002-2607-9920
  • Picó Sirvent, María Belén|||0000-0001-7761-990X
  • Martí-Renau, Raul
  • Valcárcel, M.
  • Roselló, S.
  • Beltrán, J.
  • Garcia-Martinez, S
  • Ruiz, J.J.
[EN] Melon landraces are highly appreciated by consumers who pay price premiums to compensate for lower yields, enabling on-farm conservation. However, they are highly susceptible to soilborne diseases. This study analyses the impact of Cucurbita and Cucumis rootstocks on the accumulation of flavor-related metabolites in Spanish landraces of the Ibericus melon group, as a strategy to promote their sustainable cultivation. Scion genotype was the main factor conditioning the accumulation of sugars and acids both under standard and saline organic farming conditions. The effects of grafting on organic acid accumulation were negligible, while the effects on sugar content were significant. The latter effects were dependent on specific scion-rootstock combinations, though wild Cucumis (e.g. Fian) rootstocks represent an alternative that should be further studied. The effect on the accumulation of volatiles was limited, and again depended on specific scion-rootstock combinations. The rootstock effect even differed between populations of the same landrace., This work was supported by grants PROMETEO/2017/078 and PROMETEO/2021/072 (to promote excellence groups) funded by Conselleria d'Educacio, Investigacio, Cultura i Esports and Conselleria d'Educacio, Universitats i Ocupacio (Generalitat Valenciana, Spain), and grants PID2020-116055RB-C21 and AGL2017-85563-C2-1-R-AR funded by AEI https://doi.org/10.13039/501100011033 and by "ERDF A way of making Europe". AFL is a recipient of a predoctoral fellowship from Generalitat Valenciana. RM is a recipient of a postdoctoral grant (PAID-1020) from Universitat Politecnica de Valencia. CRUE-Universitat Politecnica de Valencia provided funding for the open access publication charges.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heart rate variability analysis for the assessment of immersive emotional arousal using virtual reality: Comparing real and virtual scenarios

  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Guixeres Provinciale, Jaime
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Higuera-Trujillo, Juan Luis
  • Valenza, Gaetano
[EN] Many affective computing studies have developed automatic emotion recognition models, mostly using emotional images, audio and videos. In recent years, virtual reality (VR) has been also used as a method to elicit emotions in laboratory environments. However, there is still a need to analyse the validity of VR in order to extrapolate the results it produces and to assess the similarities and differences in physiological responses provoked by real and virtual environments. We investigated the cardiovascular oscillations of 60 participants during a free exploration of a real museum and its virtualisation viewed through a head-mounted display. The differences between the heart rate variability features in the high and low arousal stimuli conditions were analysed through statistical hypothesis testing; and automatic arousal recognition models were developed across the real and the virtual conditions using a support vector machine algorithm with recursive feature selection. The subjects' self-assessments suggested that both museums elicited low and high arousal levels. In addition, the real museum showed differences in terms of cardiovascular responses, differences in vagal activity, while arousal recognition reached 72.92% accuracy. However, we did not find the same arousal-based autonomic nervous system change pattern during the virtual museum exploration. The results showed that, while the direct virtualisation of a real environment might be self-reported as evoking psychological arousal, it does not necessarily evoke the same cardiovascular changes as a real arousing elicitation. These contribute to the understanding of the use of VR in emotion recognition research; future research is needed to study arousal and emotion elicitation in immersive VR., The research leading to these results has received partial funding from the European Commission (Project HELIOS H2020-825585 and Project EXPERIENCE H2020-101017727), from the Universitat Politecnica de Valencia (PAID-10-20), and from the Italian Ministry of Education and Research (MIUR) ("Department of Excellence" CrossLab project for the Univ. of Pisa). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spanish Melon Landraces: Revealing Useful Diversity by Genomic, Morphological, and Metabolomic Analysis

  • Flores-León, Alejandro
  • Cebolla Cornejo, Jaime|||0000-0002-2607-9920
  • Picó Sirvent, María Belén|||0000-0001-7761-990X
  • Pérez-Moro, Clara
  • Martí-Renau, Raul
  • Beltran, Joaquim
  • Roselló, Salvador
[EN] Spain is a secondary centre of the diversification of the melon (Cucumis melo L.), with high diversity represented in highly appreciated landraces belonging to the Flexuosus and Ibericus groups. A collection of 47 accessions of Flexuosus, Chate, Piel de Sapo, Tendral, Amarillo, Blanco, and Rochet was analysed using a genotyping-by-sequencing (GBS) approach. A total of 66,971 quality SNPs were identified. Genetic analysis differentiated Ibericus accessions and exotic materials (Ameri, Momordica, Kachri, and Agrestis), while Flexuous accessions shared ancestry between them. Within the Ibericus group, no clear genomic distinction could be identified for the different landraces evaluated, with accessions of different landraces showing high genetic similarity. The morphological characterization confirmed that the external colour and fruit shape had been used as recognition patterns for Spanish melon landraces, but variability within a landrace exists. Differences were found in the sugars and acid and volatile profiles of the materials. Flexuosus and Chate melons at the immature commercial stage accumulated malic acid and low levels of hexoses, while Ibericus melons accumulated high contents of sucrose and citric acid. Specific trends could be identified in the Ibericus landraces. Tendral accumulated low levels of sugars and citric acid and high of malic acid, maintaining higher firmness, Rochet reached higher levels of sugars, and Amarillo tended to lower malic acid contents. Interestingly, high variability was found within landraces for the acidic profile, offering possibilities to alter taste tinges. The main volatile organic compounds (VOCs) in Flexuosus and Chate were aldehydes and alcohols, with clear differences between both groups. In the Ibericus landraces, general trends for VOC accumulation could be identified, but, again, a high level of variation exists. This situation highlights the necessity to develop depuration programs to promote on-farm in situ conservation and, at the same time, offers opportunities to establish new breeding program targets and to take advantage of these sources of variation., This work was supported by grants PROMETEO/2017/078 and PROMETEO/2021/072 (to promote excellence groups), funded by Conselleria d'Educacio, Investigacio, Cultura i Esports (Generalitat Valenciana, Spain) and grant AGL2017-85563-C2-1-R-AR, funded by AEI 10.13039/501100011033 and by "ERDF: A way of making Europe". C.P.M. is a recipient of the predoctoral fellowship "Programa de Ayudas de Investigacion y Desarrollo (PAID-01-19)" from Universitat Politecnica de Valencia, R.M. is a recipient of a postdoctoral grant (PAID-10-20) from Universitat Politecnica de Valencia, and A.F.-L. is a recipient of a predoctoral fellowship from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

InP/ZnS/ZnS core quantum dots for InP luminescence and photoelectrochemical improvement

  • Harabi, Imen
  • Khattak, Yousaf Hameed
  • Jemai, Safa
  • Toura, Hanae
  • Ullah, Shafi
  • Marí, B.|||0000-0003-0001-419X
[EN] Indium phosphide quantum dots (InP QDs) is a promising alternative to traditional Quantum Dots (QDs), improving photoluminescence and other properties. We present the synthesis of ZnS/ZnS double shell QDs by the hot injection method. The diameter of QDs was increased from 3.56 nm for the InP core, 4.7 nm for InP/ZnS QDs (with one-time shelling) and 5.53 nm for InP/ZnS/ZnS (double shelling). This experience revealed that the surface morphology of the QDs has a more regular spherical form and is well dispersed. Moreover, the shell's growth results in a strong improvement of the luminescence. Which is due to the passivation of the surface states by shell comparing with ZnS QDs mono shell coating, with an emission peak of 680 nm. Additionally, to improve the photocurrent efficiency, we report the synthesis of nanostructured films by depositing InP QDs, InP/ZnS QDs, and InP/ZnS/ZnS QDs. Spin coating method was used on the surface of Titanium dioxide nanotubes TiO2 NTAs prepared by the electrochemical anodization process. Photoelectrochemical analyses show significant properties improvement of InP/ZnS/TiO2 and InP/ZnS/ZnS/TiO2 in comparison of InP/TiO2. The measurement shows a photocurrent density around 4 x 10(-6) mAcm-2 for the photoanode InP/ZnS/ZnS/TiO2. Which is almost six times higher than that measured on TiO2/InP QDs. This result is attributed to a good compromise between Quantum Dots and TiO2 NTAs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cluster-Based Communication Protocol and Architecture for a Wastewater Purification System Intended for Irrigation

  • Lloret, Jaime|||0000-0002-0862-0533
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Sendra, Sandra|||0000-0001-9556-9088
  • García-García, Laura
  • Lorenz, Pascal
[EN] The remote location of agricultural fields leads to the difficulty of deploying Precision Agriculture (PA) systems as there is no Internet access in those areas. Therefore, the use of long-range wireless technologies such as LoRa can provide connectivity to rural areas and allow monitoring PA systems remotely. In this paper, a heterogeneous architecture and protocol that allows communication with both WiFi and LoRa, including multiple hops in LoRa are presented. The design is based on a tree topology comprised of electronic devices deployed on different areas of interest for PA systems such as the canals of irrigation water, the fields, and the urban areas that generate wastewater. A set of practical tests with different configurations have been performed to determine the correct operation of the proposed protocol. The results show that the consumed bandwidth for both 433 MHz and 868 MHz frequency bands remained within the limits for the most restrictive LoRa configurations. Therefore, different deployment needs can be addressed with the implementation of this proposal. Furthermore, the use of packet transmission delays of 500 ms at the CH node results in high successful packet delivery rates., This work has been funded by the European Union through the ERANETMED (Euromediterranean Cooperation through European Research Area Net (ERANET) joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the ''Ministerio de Ciencia e Innovacion'' through the Project PID2020-114467RR-C33 and by ''Ministerio de Agricultura, Pesca y Alimentacion'' through the ''proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri)'' project GO TECNOGAR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Schedulability Analysis in Fixed-Priority Real-Time Multicore Systems with Contention

  • Ortiz-Enguix, Luis|||0009-0002-1376-0650
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] In the scheduling of hard real-time systems on multicore platforms, significant unpredictability arises from interference caused by shared hardware resources. The objective of this paper is to offer a schedulability analysis for such systems by assuming a general model that introduces interference as a time parameter for each task. The analysis assumes constrained deadlines and is provided for fixed priorities. It is based on worst-case response time analysis, which exists in the literature for monocore systems. We demonstrate that the worst-case response time is an upper bound, and we evaluate our proposal with synthetic loads and execution on a real platform., This work was funded by MCIN/AEI/10.13039/501100011033/ grant PID2021-124502OBC41 (PRESECREL), and by PAID-10-20 (Universitat Politècnica de València)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advantages of using relevant nearly optimal solutions in multi-objective tuning of robust controllers

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Veyna-Robles, Uriel
[EN] This paper presents a new approach for the multiobjective optimal design of robust controllers in systems with stochastic parametric uncertainty. Traditionally, uncertainty is incorporated into the optimization process. However, this can generate two problems: (1) low performance in the nominal scenario; and (2) high computational cost. For the first point, it is possible to ensure that the controllers produce an acceptable performance for the nominal scenario in exchange for being lightly robust. For the second point, the methodology proposed in this work reduces the computational cost significantly. This approach addresses uncertainty by analyzing the robustness of optimal and nearly optimal controllers in the nominal scenario. The methodology guarantees obtaining controllers that are similar/neighboring to lightly robust controllers. Two examples of controller design are shown: one for a linear model and another for a nonlinear model. Both examples demonstrate the usefulness of the proposed new approach., This work was supported in part by the grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033/ and by ''ERDF A way of making Europe''; by the Universitat Politecnica de Valencia through the grant SP20200109 (PAID-10-20); by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by ''ESF Investing in your future''; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic artifact recognition and correction for electrodermal activity based on LSTM-CNN models

  • Llanes-Jurado, José
  • Lucia A. Carrasco-Ribelles
  • Soria-Olivas, Emilio
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Marín-Morales, Javier|||0000-0003-1271-2892
[EN] Researchers increasingly use electrodermal activity (EDA) to assess emotional states, developing novel appli-cations that include disorder recognition, adaptive therapy, and mental health monitoring systems. However, movement can produce major artifacts that affect EDA signals, especially in uncontrolled environments where users can freely walk and move their hands. This work develops a fully automatic pipeline for recognizing and correcting motion EDA artifacts, exploring the suitability of long short-term memory (LSTM) and convolutional neural networks (CNN). First, we constructed the EDABE dataset, collecting 74h EDA signals from 43 subjects collected during an immersive virtual reality task and manually corrected by two experts to provide a ground truth. The LSTM-1D CNN model produces the best performance recognizing 72% of artifacts with 88% accuracy, outperforming two state-of-the-art methods in sensitivity, AUC and kappa, in the test set. Subsequently, we developed a polynomial regression model to correct the detected artifacts automatically. Evaluation of the complete pipeline demonstrates that the automatically and manually corrected signals do not present differences in the phasic components, supporting their use in place of expert manual correction. In addition, the EDABE dataset represents the first public benchmark to compare the performance of EDA correction models. This work provides a pipeline to automatically correct EDA artifacts that can be used in uncontrolled conditions. This tool will allow to development of intelligent devices that recognize human emotional states without human intervention., This work was supported by the European Commission [RHUMBO H2020-MSCA-ITN-2018-813234] ; the Generalitat Valenciana, Spain [REBRAND PROMETEU/2019/105] ; the MCIN/AEI, Spain [PID2021-127946OB-I00] ; and the Universitat Politecnica de Valencia, Spain [PAID-10-20].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Well-Defined Clusters to Functional Materials: Molecular Engineering of Amorphous Molybdenum Sulfides for Hydrogen Evolution Electrocatalysis

  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Rodenes-Carrillo, Miriam
  • Martín, Santiago
  • Sorribes-Terrés, Iván
[EN] Developing precious-metal-free electrocatalysts for the hydrogen evolution reaction (HER) is crucial to establishing H-2 produced from renewable energy sources as an alternative energy carrier to fossil fuels. Amorphous molybdenum sulfide-based materials are promising candidates that provide highly active HER electrocatalysts by introducing active sites at both the edge positions and the typically inactive basal planes. Herein, we report an innovative bottom-up synthesis of amorphous molybdenum sulfides using molecular complexes with Mo3S4 and Mo3S7 cluster cores as building entities. The ability to control the precursor of choice has made it viable to enhance the HER activity of these materials. Furthermore, the tunability of the atomic composition of the molecular cluster precursors allows the modification of the derived materials with atomic-scale precision, enabling us to track the synthesis mechanism and, in combination with Density Functional Theory (DFT) calculations, to decipher the nature of the HER active sites., This work has been supported by the Gen-T Plan of the Generalitat Valenciana through the programs "Subvencions a l'Excellencia Cientifica de Juniors Investigadors" (SEJI/2020/ 018) and "Investigadors Doctors d'Exellencia" (CIDEXG/ 2022/22). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. S.M. thanks DGA/fondos FEDER (construyendo Europa desde Aragon) for funding the research group Platon (E31_20R). M.R. and F.G. acknowledge the Vice-Rectorate for Research, Innovation and Transfer of the Universitat Politecnica de Valencia (UPV) for a pre- and postdoctoral (PAID-10-20) fellowship, respectively. The authors also thank the Electron Microscopy Service of the UPV for TEM facilities and Dr. G. Antorrena for technical support in XPS studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy-aware Randomized Neighbor Discovery Protocol based on Collision Detection in Wireless Ad Hoc Networks

  • Sorribes, Jose Vicente
  • Peñalver Herrero, Mª Lourdes|||0000-0002-0403-7770
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Sendra, Sandra|||0000-0001-9556-9088
[EN] In wireless ad hoc networks, neighbor discovery is necessary as an initial step. In this work we present LECDH (Low Energy Collision Detection Hello), an energy-aware randomized handshake-based neighbor discovery protocol for static environments. We carried out simulations through Castalia 3.2 simulator and compared LECDH with an existing protocol EAH (Energy Aware Hello) used as reference. We conclude that the proposal outperforms the reference protocol both in one-hop and multi-hop environments in terms of Energy consumption, Discovery time, Number of discovered neighbors, Throughput, and Discoveries per packet sent, for high duty cycles. Moreover, for low number of nodes in LECDH, as the duty cycle is reduced the performance is better according to all 5 metrics in both environments. Overall, we found that our proposal follows more realistic assumptions and still allows nodes to succeed at discovering all their neighbors almost with probability 1. Moreover, a qualitative comparison of the reference solution and our proposal is included in this paper., This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially founded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DRALBA: Dynamic and Resource Aware Load Balanced Scheduling Approach for Cloud Computing

  • Nabi, Said
  • Ibrahim, Muhammad
  • Jimenez, Jose M.|||0000-0002-3688-7235
[EN] For the last few years, Cloud computing has been considered an attractive high-performance computing platform for individuals as well as organizations. The Cloud service providers (CSPs) are setting up data centers with high performance computing resources to accommodate the needs of Cloud users. The users are mainly interested in the response time, whereas the Cloud service providers are more concerned about the revenue generation. Concerning these requirements, the task scheduling for the users' applications in Cloud computing attained focus from the research community. Various task scheduling heuristics have been proposed that are available in the literature. However, the task scheduling problem is NP-hard in nature and thus finding optimal scheduling is always challenging. In this research, a resource-aware dynamic task scheduling approach is proposed and implemented. The simulation experiments have been performed on the Cloudsim simulation tool considering three renowned datasets, namely HCSP, GoCJ, and Synthetic workload. The obtained results of the proposed approach are then compared against RALBA, Dynamic MaxMin, DLBA, and PSSELB scheduling approaches concerning average resource utilization (ARUR), Makespan, Throughput, and average response time (ART). The DRALBA approach has revealed significant improvements in terms of attained ARUR, Throughput, and Makespan.This fact is endorsed by the average resource utilization results (i.e., 98 % for HCSP dataset, 75 % for Synthetic workload (improve ARUR by 72.00 %, 77.33 %, 78.67 %, and 13.33 % as compared to RALBA, Dynamic MaxMin, DLBA and PSSELB respectively), and 77 % for GoCJ (i.e., the second best attained ARUR))., This work was supported in part by the Universitat Politecnica de Valencia through the Post-Doctoral PAID-10-20 Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A WiFi-Based Sensor Network for Flood Irrigation Control in Agriculture

  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Garcia-Fernandez, Julia
  • García, Laura
[EN] The role of agriculture in society is vital due to factors such as providing food for the population, is a major source of employment worldwide, and one of the most important sources of revenue for countries. Furthermore, in recent years, the interest in optimizing the use of water resources has increased due to aspects such as climate change. This has led to the introduction of technology in the fields by means of sensor networks that allow remote monitoring and control of cultivated lands. In this paper, we present a system for flood irrigation in agriculture comprised of a sensor network based on WiFi communication. Different sensors measure atmospheric parameters such as temperature, humidity, and rain, soil parameters such as humidity, and water parameters such as water temperature, salinity, and water height to decide on the need of activating the floodgates for irrigation. The user application displays the data gathered by the sensors, shows a graphical representation of the state of irrigation of each ditch, and allows farmers to manage the irrigation of their fields. Finally, different tests were performed on a plot of vegetables to evaluate the correct performance of the system and the coverage of the sensor network on a vegetated area with different deployment options., This work was partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the Programa Estatal de I+D+i Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2017-2020 (Project code: PID2020-114467RR-C33), and by proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri) in the framework Programa Nacional de Desarrollo Rural 2014-2020, GO TECNOGAR. This work was also partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical, luminescence, photocurrent and structural properties of sol-gel ZnO fibrous structure thin films for optoelectronic applications: A combined experimental and DFT study

  • Ullah, Shafi
[EN] Zinc oxide is an important oxide semiconductor, with excellent physical and chemical properties that are used in different applications fields. In this research paper, ZnO thin films were synthesized using different types of solvent by sol-gel spin coating technique. The effect of solvent on the structural, morphological, photocurrent and optical properties of the films has been studied. X-ray diffraction revealed the high crystallinity of films in the wurtzite structure with a c-axis preferred orientation. SEM micrographs revealed that all films exhibit a fibrous structure, where the more homogeneous and dense surfaces were observed for ZnO-2-PrOH and ZnO¿EtOH films. The optical properties analysis shows that the films have high transparency. Different structural and optical parameters were influenced by the type of solvent, where ZnO-2-PrOH film displays an improvement in structural and optical properties. The photoluminescence PL spectrum revealed three emissions, two green emissions and a UV emission at 390 nm. ZnO-2-PrOH film exhibits a high intensity ratio of UV to visible (IUV/Ivis), a best UV response, and photocurrent properties. Finally, structural and optical parameters were also calculated by first-principles DFT calculations, discussed, and compared to those experimental., One of the authors Shafi Ullah acknowledges the post-doctoral contract supported by the RRHH, postdoctoral contract (PAID-10-20), and Ministerio de Economía y Competitividad (Grant Number PID 2019-107137 RB-C21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Wireless Sensor Network Deployment for Soil Moisture Monitoring in Precision Agriculture

  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • García-García, Laura
[EN] The use of precision agriculture is becoming more and more necessary to provide food for the world's growing population, as well as to reduce environmental impact and enhance the usage of limited natural resources. One of the main drawbacks that hinder the use of precision agriculture is the cost of technological immersion in the sector. For farmers, it is necessary to provide low-cost and robust systems as well as reliability. Toward this end, this paper presents a wireless sensor network of low-cost sensor nodes for soil moisture that can help farmers optimize the irrigation processes in precision agriculture. Each wireless node is composed of four soil moisture sensors that are able to measure the moisture at different depths. Each sensor is composed of two coils wound onto a plastic pipe. The sensor operation is based on mutual induction between coils that allow monitoring the percentage of water content in the soil. Several prototypes with different features have been tested. The prototype that has offered better results has a winding ratio of 1:2 with 15 and 30 spires working at 93 kHz. We also have developed a specific communication protocol to improve the performance of the whole system. Finally, the wireless network was tested, in a real, cultivated plot of citrus trees, in terms of coverage and received signal strength indicator (RSSI) to check losses due to vegetation., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3227 SMARTWATIR, by the "Programa Estatal de I+D+i Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2017-2020" (Project code: PID2020-114467RR-C33) and by "proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri)" in the framework "Programa Nacional de Desarrollo Rural 2014-2020", GO TECNOGAR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biosignal comparison for autism assessment using machine learning models and virtual reality

  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Altozano-Fernández, Alberto|||0009-0006-3470-5836
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Chicchi Giglioli, Irene Alice
  • Mantovani, Fabrizia
[EN] Clinical assessment procedures encounter challenges in terms of objectivity because they rely on subjective data. Computational psychiatry proposes overcoming this limitation by introducing biosignal-based assessments able to detect clinical biomarkers, while virtual reality (VR) can offer ecological settings for measurement. Autism spectrum disorder (ASD) is a neurodevelopmental disorder where many biosignals have been tested to improve assessment procedures. However, in ASD research there is a lack of studies systematically comparing biosignals for the automatic classification of ASD when recorded simultaneously in ecological settings, and comparisons among previous studies are challenging due to methodological inconsistencies. In this study, we examined a VR screening tool consisting of four virtual scenes, and we compared machine learning models based on implicit (motor skills and eye movements) and explicit (behavioral responses) biosignals. Machine learning models were developed for each biosignal within the virtual scenes and then combined into a final model per biosignal. A linear support vector classifier with recursive feature elimination was used and tested using nested crossvalidation. The final model based on motor skills exhibited the highest robustness in identifying ASD, achieving an AUC of 0.89 (SD = 0.08). The best behavioral model showed an AUC of 0.80, while further research is needed for the eye-movement models due to limitations with the eye-tracking glasses. These findings highlight the potential of motor skills in enhancing objectivity and reliability in the early assessment of ASD compared to other biosignals., This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness-funded project IDI-20201146. It was also co-founded by the European Union through the Operational Program of the European Regional development Fund (FEDER) of the Valencian Community 2014 2020 (IDIFEDER/2018/029 and IDIFEDER/2021/038). Furthermore, MEM received partial funding by the Valencian Community (GRISOLIAP/2019/137; CIBEFP/2021/38), and by the Polytechnic University of Valencia (Predoctoral Mobility Grant of 2021). JMM received partial funding from the Polytechnic University of Valencia (PAID-10-20). Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecularly Engineering Defective Basal Planes in Molybdenum Sulfide for the Direct Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes

  • Rodenes-Carrillo, Miriam
  • Martín, Santiago
  • Sorribes-Terrés, Iván
  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Developing more sustainable catalytic processes for preparing N-heterocyclic compounds in a less costly, compact, and greener manner from cheap and readily available reagents is highly desirable in modern synthetic chemistry. Herein, we report a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes in the presence of molecular hydrogen. An innovative molecular cluster-based synthetic strategy that employs Mo3S4 complexes as precursors have been used to engineer a sulfur-deficient molybdenum disulfide (MoS2)-type material displaying structural defects on both the naturally occurring edge positions and along the typically inactive basal planes. By applying this catalyst, a broad range of functionalized 2-substituted benzimidazoles, including bioactive compounds, can be selectively synthesized by such a direct hydrogenative coupling protocol even in the presence of hydrogenation-sensitive functional groups, such as double and triple carbon-carbon bonds, nitrile and ester groups, and halogens as well as diverse types of heteroarenes., This work has been supported by the Gen-T Plan of the Generalitat Valenciana through the "Subvencions a l'Excel center dot le`ncia Cientifica de Ju ' niors Investigadors" program (SEJI/2020/018). Finantial support from the Spanish National Research Council (CSIC) is gratefully acknowledged (Project No. 201880E064). S.M. thanks for financial assistance from Ministerio de Ciencia e Innovacion from Spain and fondos FEDER in the framework of the project PID2019-105881RBI00 and DGA/fondos FEDER (construyendo Europa desde Aragon) for funding the research group Platon (E31_17R). M.R. and F.G. acknowledge the Vice-Rectorate for Research, Innovation and Transfer of the Universitat Polite`cnica de Vale`ncia (UPV) for a pre-and postdoctoral (PAID-10-20) fellowship, respectively. The authors also thank the Electron Microscopy Service of the UPV for TEM and STEM facilities and Dr. G. Antorrena for technical support in XPS studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Infrastructure Manager: A TOSCA-Based Orchestrator for the Computing Continuum

  • Caballer Fernández, Miguel|||0000-0001-9393-3077
  • Moltó, Germán|||0000-0002-8049-253X
  • Calatrava Arroyo, Amanda|||0000-0002-9018-9171
  • Blanquer Espert, Ignacio|||0000-0003-1692-8922
[EN] The edge-to-cloud continuum involves heterogeneous computing resources, including low-power physical devices, Virtual Machines (VMs) in cloud management platforms and serverless computing services based on the FaaS (Functions as a Service) model. This requires novel strategies to describe and efficiently deploy complex applications that execute across the computing continuum. To this end, this paper introduces the developments in the Infrastructure Manager (IM), an open-source TOSCA-based orchestrator to provision and configure virtualized computing resources from a wide range of cloud platforms. By supplementing TOSCA with additional types, the IM can also provision from FaaS platforms across the computing continuum by leveraging public cloud services such as AWS Lambda and on-premises serverless platforms, such as OSCAR. This allows event-driven data-processing applications across multiple computing platforms and architectures. The evolution of the Infrastructure Manager is described to accommodate the definition in TOSCA of complex applications that span across the computing continuum and their automated provisioning and configuration using Infrastructure as Code (IaC) approaches. Its effectiveness is assessed through a real use case involving a machine-learning classifier application for assisting in the early diagnosis of Rheumatic Heart Disease (RHD). The results show that the new developments enable the IM to efficiently deploy complete application architectures described in TOSCA across the computing continuum, from VMs to FaaS services., Grant PID2020-113126RB-I00 funded by MCIN/AEI/10.13039/501100011033. Also, Project PDC2021- 120844-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was partially supported by the project AI-SPRINT AI in Secure Privacy-Preserving Computing Continuum which has received funding from the European Union s Horizon 2020 Research and Innovation Programme under Grant 101016577 and by the AI4EOSC Artificial Intelligence for the European Open Science Cloud that has received funding from the European Union s Horizon Europe Research and Innovation Programme under Grant 101058593. Finally, Amanda wants to thank the support received by the Universitat Politècnica de València for the project Extensión de modelos de computaci¿n en cloud en entornos confiables y altamente distribuidos , from the PAID-10-20 postdoctoral program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Protocol and Architecture for a Wastewater Treatment System Intended for Irrigation

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
  • Parra-Boronat, Lorena
  • García, Laura
  • Mauri, Pedro V.
  • Lorenz, Pascal
[EN] Water quality may be affected by aspects such as pollution from industries, agricultural fertilizers and pesticides, and waste produced by humans. This contamination can affect the produce of the fields irrigated by untreated water. Therefore, it is necessary to add a treatment process in irrigation systems. In this paper, an architecture, communication protocol, and a data analysis algorithm for a wastewater treatment system intended for irrigation are presented. Our system includes a smart group-based wireless sensor network that is able to detect high salinity levels and pollution stains, such as oil spills. When contamination is detected, the water is led into auxiliary canals that perform the biosorption process to treat the water and dump it back into the main canal. Simulations were performed to assess the amount of data stored on the secure digital (SD) card, the consumed bandwidth, and the energy consumption of our proposal. The results show the system has a low bandwidth consumption with a maximum of 2.58 kbps for the setting of two daily data transmissions of the node in the last auxiliary canal. Furthermore, it can sustain the energy consumption in adverse conditions, where the node with the highest energy consumption reaches the lowest energy value of 12,320 mW/h., This research was partially funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program and by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.