Pasar al contenido principal

DESARROLLO DE HERRAMIENTAS DE OPTIMIZACION MULTIOBJETIVO PARA PROBLEMAS DE INGENIERIA CON INCERTIDUMBRE

PID2021-124908NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parameter uncertainty modeling for multiobjective robust control design. Application to a temperature control system in a proton exchange membrane fuel cell

  • Veyna-Robles, Uriel
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] Advanced control systems are tuned using dynamic models and optimization techniques. This approach frequently involves satisfying multiple conflicting objectives. Tuning robust controllers requires considering a framework that represents the system uncertainties, and its definition is not a trivial task. When dealing with a nonlinear model with many parameters, a high-quality representation requires a massive sampling of variations. In many cases, this represents an inaccessible computational cost for the optimization process. This work presents a new methodology for parameter uncertainty modeling that is oriented to tuning robust controllers based on multiobjective optimization techniques. The uncertainty modeling formulated represents a feasible computational cost and leads to robust solutions without attributing excessive conservatism. The novelty of this process consists in using the multiobjective space to define a set of scenarios with highly representative properties of the global uncertainty framework that formulate the control problem under a predefined minimization strategy. To demonstrate the effectiveness of this methodology, we present a temperature control design in a micro-CHP system under worst-case minimization. Based on the results, particular interest is given to verifying the appropriate formulation of the uncertainty modeling, which represents a 92.8% reduction of the computational cost involved in solving the robust optimization problem under a global uncertainty framework., This work was supported in part by grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; by grant SP20200109 (PAID-10-20) funded by Universitat Politecnica de Valencia; and by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future"; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parametric Design and Assessment of 3D Printable Open Noise Barrier: Device Customization to Protect Buildings from Train Brake Noise

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Redondo, Javier|||0000-0002-5507-7799
  • Sangiorgio, Valentino
  • Parisi, Nicola
  • Mangini, Agostino Marcello
  • Fanti, Maria Pia
[EN] Three-dimensional (3D) printing applied in architectural engineering is profoundly changing building technologies and construction processes. Indeed, the wide scope of metamaterials and components manufactured with 3D printing provides unprecedented adaptability and customizability in construction. One of the promising applications of such novel technology concerns metamaterial noise barriers that protect buildings from environmental noise. More specifically, sonic crystal noise barriers (SCNBs) are effective solutions with good sound insulation characteristics (with the advantage of letting air/light pass through). Conversely, the limitations of SCNB are related to their design and manufacturing (new complex design approaches are required to maximize the performance of such devices). To overcome such drawbacks, this research proposes a novel methodological approach to design and customize the topology of SCNBs made achievable with additive manufacturing. First, parametric modeling affords design flexibility and adaptability. Second, iterative performance simulations are set to adjust parameters considering target frequencies. Third, 3D printing allows the prototyping of customized barriers. The methodology is applied to the case of train brake noise. A novel SCNB is designed, simulated, and prototyped through 3D-printing technology. Finally, experimental validation is executed according to current international standards., This work was funded by the European Union-European Social Fund-PON Research and Innovation 2014-2020 and in part by Grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by the European Regional Development Fund (ERDF) "A way of making Europe." We acknowledge the EPSG laboratories resources and technicians for all the facilities for the experimental validation of the prototypes. A special thanks is addressed to Romina del Rey, Enrique Anastasio Spaeth, Jaime Galiana-Nieves, and FabLab Bitonto for supporting the development of the prototype in the laboratory Fablab Poliba.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Otros (Other)

Fundamentals for the design of energy management strategies for smart grids based on predictive control techniques. Methodology and case studies (EMS validation test)

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vivas Fernandez, Francisco José
  • Segura Manzano, Francisca
  • Andújar Márquez, José Manuel
This document compiles all the simulations performed to validate the EMS developed in the paper "Fundamentals for the design of energy management strategies for smart grids based on predictive control techniques. Methodology and case studies", This work was supported in part by grant PID2020-116616RB-C31 and grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’; by the Generalitat Valenciana regional government through project CIAICO/2021/064, by Andalusian Regional Program of R+D+i (P20- 00730), and by the project “The green hydrogen vector. Residential and mobility application”, approved in the call for research projects of the Cepsa Foundation Chair of the University of Huelva. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel energy management system based on two-level hierarchical economic model predictive control for use in microgrid control

  • Vivas, F. J.
  • Segura, F.
  • Andújar, J.M.
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] This study proposes an innovative energy management system (EMS) based on two-level hierarchical model predictive control, designed for microgrid control. MPC-based EMS are economically efficient and beneficial, although the real-time implementation often requires hierarchical structures due to high computational costs. The high level defines a long-term economic optimisation, with a longer sampling period and prediction horizon. Traditionally, the lower level is based on a tracking index of the high-level reference with a shorter sampling period and prediction horizon. In this case, it is necessary to determine the optimisation index weights, a complex selection that depends on the specific characteristics of each microgrid. Generally, the weights are determined by trial and error, lacking a clear physical meaning. Therefore, in this work, a new approach is proposed where the low level performs economic optimisation (similar to high level) in a short-term. Both approaches were evaluated through a practical case in a microgrid. The results obtained show that the traditional tracking approach can generate undesirable effects (unnecessary energy transactions and frequent switching of devices) that produces economic losses, which can only be mitigated by a careful adjustment of the weights. In contrast, the proposed economic approach eliminates these undesirable behaviours, and the need for weight definition, achieving an economic improvement of 3-25%. Therefore, the results confirmed the effectiveness of the proposed new approach, which provides better economic results while overcoming the limitations of traditional tracking methods., This work was supported in part by grant PID2023-148456OB-C41 and grant PID2021-124908NB-I00 founded by the Spanish Ministry of Economy and Competitiveness, and RED2022-134588-T REDGENERA founded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; by the Generalitat Valenciana regional government through project CIAICO/2021/064.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel energy management system based on move-blocking based predictive control for use in microgrid control

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vivas, F. J.
  • Segura, F.
  • Andújar, J. M.
[EN] The increasing complexity of renewable-based microgrids demands advanced Energy Management Systems (EMS) capable of efficiently managing multi-time scale dynamics. Conventional Model Predictive Control (MPC) based EMS often rely on complex hierarchical structures with problematic weighting factors, which can cause undesirable effects, leading to suboptimal performance. This work proposes and validates an innovative single-layer EMS that leverages a move-blocking strategy. The key novelty lies in embedding long-term economic objectives and short-term physical constraints into a unified optimisation problem, eliminating the need for hierarchical layers and manual weight tuning. The performance of the proposed EMS was benchmarked against a conventional bilevel hierarchical EMS and an optimal reference case. The results demonstrate significant quantitative and qualitative improvements. Our approach reduces total operating costs by over 8%. This saving is composed of several key factors: a 13 % decrease in degradation-related costs attributable to more stable management of the hydrogen system, a reduction in fixed operating costs by minimising the usage time of the hydrogen systems, and a 7 % reduction in variable energy costs. Computationally, the strategy is highly efficient, reducing computation time by 99 % compared to the optimal case and confirming its real-time feasibility. Furthermore, it ensures more stable operation of the hydrogen system and increases system autonomy. These findings position the proposed move-blocking MPC framework as a scalable, robust, and computationally efficient solution for intelligent energy management in next-generation microgrids., This work has been funded by project PID2023-148456OB-C41 and PID2021-124908NB-I00, funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal Operating Patterns for the Energy Management of PEMFC-Based Micro-CHP Systems in European Single-Family Houses

  • Navarro-Giménez, Santiago
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] Commercial proton exchange membrane fuel cell (PEMFC)-based micro-combined heat and power (micro-CHP) systems are operated by rule-based energy management systems (EMSs). These EMSs are easy to implement but do not perform an explicit economic optimization. On the other hand, an optimal EMS can explicitly incorporate an economic optimization, but its implementation is more complex and may not be viable in practice. In a previous contribution, it was shown that current rule-based EMSs do not fully exploit the economic potential of micro-CHP systems due to their inability to adapt to changing scenarios. This study investigates the economic performance and behavior of an optimal EMS in 46 scenarios within the European framework. This EMS is designed using a model predictive control approach, and it is formulated as a mixed integer linear programming problem. The results reveal that there are only four basic optimal operating patterns, which vary depending on the scenario. This finding enables the design of an EMS that is computationally simpler than the optimal EMS but capable of emulating it and, therefore, is able to adapt effectively to changing scenarios. This new EMS would improve the cost-effectiveness of PEMFC-based micro-CHP systems, reducing their payback period and facilitating their mass market uptake., This work was supported, in part, by grant PID2021-124908NB-I00, which was funded by MCIN/AEI/10.13039/501100011033/; by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advantages of using relevant nearly optimal solutions in multi-objective tuning of robust controllers

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Veyna-Robles, Uriel
[EN] This paper presents a new approach for the multiobjective optimal design of robust controllers in systems with stochastic parametric uncertainty. Traditionally, uncertainty is incorporated into the optimization process. However, this can generate two problems: (1) low performance in the nominal scenario; and (2) high computational cost. For the first point, it is possible to ensure that the controllers produce an acceptable performance for the nominal scenario in exchange for being lightly robust. For the second point, the methodology proposed in this work reduces the computational cost significantly. This approach addresses uncertainty by analyzing the robustness of optimal and nearly optimal controllers in the nominal scenario. The methodology guarantees obtaining controllers that are similar/neighboring to lightly robust controllers. Two examples of controller design are shown: one for a linear model and another for a nonlinear model. Both examples demonstrate the usefulness of the proposed new approach., This work was supported in part by the grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033/ and by ''ERDF A way of making Europe''; by the Universitat Politecnica de Valencia through the grant SP20200109 (PAID-10-20); by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by ''ESF Investing in your future''; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strategy for obtaining robust solutions in multi-objective design with uncertainties

  • Veyna-Robles, Uriel
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] This paper proposes a novel definition of robustness for multi-objective optimization problems. This definition underpins an innovative strategy for obtaining robust solutions in the presence of uncertainty; it involves formulating the cost function under uncertainties as conflicting objectives during optimization. This approach aims to define the decision vectors that are not dominated in all scenarios simultaneously by any other. These solutions exhibit both optimality and robustness properties, aligning with conventional and unconventional multi-objective methods. This approach enables the implicit definition of the Pareto-optimal solutions for each scenario and robust solutions that optimize performance in worst-case scenarios. Additionally, the set of robust solutions that optimize the global performance concerning the utopian points of all uncertainty scenarios is also defined. To demonstrate the effectiveness of this method, this paper addresses two control design problems. The first example, a first-order process, illustrates the advantages and aspects of the optimization strategy. The second problem, multi-loop temperature control design of a proton exchange membrane fuel cell stack, is a more complex engineering problem involving results from previous research., This work was supported in part by the grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033/and by "ERDF A way of making Europe"; by grant PRE2019-087579 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future"; and by the Generalitat Valenciana regional government through project CIAICO/2021/064. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Frequency Sound Wave Propagation at Open-Air Concerts: Acoustic Metamaterial s Audience Phenomenon

  • La Roda Mauro, Joan F.
  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Over the past decade, there has been growing concern about how the audience affects sound wave propagation at open-air concerts, particularly in the low-frequency range. The key lies in the difference between the conditions when the system engineer sets up the mid-high units and the subwoofers before the show, without the audience, and when a dense crowd occupies the audience area during the performance. In this paper it will be shown that the audience behaves as an equivalent medium resulting in similar phenomena to those found in some acoustic metamaterials, delaying the sound propagation compared with the air above the audience. This delay affects the entire sound wave, modifying its phase and magnitude as it propagates. The front-of-house engineer can experience these phenomena, and the analysis of how it affects the front-of-house position, whether raised or on the ground, is required to properly set up the sound system within the varying conditions., This work was partially funded by grant PID2021-124908NB-I00, founded by MCIN/AEI/10.13039/501100011033 and by European Regional Development Fund (ERDF)- "A way of making Europe."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodology for energy management strategies design based on predictive control techniques for smart grids

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Vivas, F.J.
  • Segura, F.
  • Andújar, J.M.
[EN] This article focuses on the development of a general energy management system (EMS) design methodology using on model-based predictive control (MPC) for the control and management of microgrids. Different MPCbased EMS for microgrids have been defined in the literature; however, there is a lack of generality in the proposed that would facilitate adapting to new architectures, energy storage system technology, nature of the bus, application, or purpose. To fill this gap, a novel general formulation that is parameterizable, simple, easily interpretable, and reproducible in different microgrid architectures is presented. This is the result of the development of a novel methodology, which is also presented. It considers the state space formulation of the controller from the initial modelling phase, from the dynamics of the energy storage systems represented by their models to the subsequent definition of the optimisation problem. This is developed through the design of the general cost function and the formulation of constrains, by means of general guidelines and reference values. To evaluate the performance of the developed methodology, simulation tests were carried out for four different microgrid architectures, with different applications and objectives, also considering different generation conditions, demand profiles, and initial conditions. The results showed that, with some simple guidelines and regardless of the case study, the developed MPC controller design methodology can address the technical economic optimisation problem associated with energy management in microgrids in an easy and intuitive way., This work was supported in part by grant PID2020-116616RB-C31 and grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe ; by the Generalitat Valenciana regional government through project CIAICO/2021/ 064, by Andalusian Regional Program of R + D + i (P20- 00730), and by the project The green hydrogen vector. Residential and mobility application , approved in the call for research projects of the Cepsa Foundation Chair of the University of Huelva.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rule-based energy management strategies for PEMFC-based micro-CHP systems: A comparative analysis

  • Navarro-Giménez, Santiago
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[EN] Los sistemas micro-CHP basados en PEMFC comerciales suelen operar mediante estrategias de gestión energética basadas en reglas. Cada una de estas estrategias constituye una forma distinta de satisfacer la demanda energética de un hogar, ya sea siguiendo la demanda de calor, la demanda de electricidad o el máximo de ambas. Estudios previos han demostrado que la estrategia más adecuada —es decir, la que logra cubrir la demanda con el menor costo operativo— depende del escenario particular en el que funcione el sistema micro-CHP. Entre los factores que influyen se encuentran los precios del gas y de la electricidad, las demandas energéticas anuales y la posibilidad de exportar electricidad a la red, entre otros. El presente trabajo tiene como objetivo explorar esta relación de dependencia y profundizar en su comprensión. Para ello, se realiza un análisis paramétrico en el que se comparan los desempeños alcanzados por cuatro estrategias de operación basadas en reglas. El estudio considera como variables los precios de la energía (electricidad y gas natural), la tarifa de inyección a la red, la degradación del stack, las condiciones climáticas y la relación calor–electricidad de la demanda. Los resultados muestran esta relación de dependencia de manera clara y más integral, lo que permite una mejor comprensión de su naturaleza. De este análisis se infiere, entre otras cosas, que adaptar la estrategia al escenario puede generar ahorros anuales de hasta 14,5 puntos porcentuales. Asimismo, esta caracterización más precisa de la relación entre estrategia y escenario puede ser útil para el diseño de nuevas estrategias operativas. Dichas estrategias, sin llegar a la complejidad de un enfoque de gestión energética óptima basado en programación lineal, podrían aprovechar mejor el potencial de ahorro de los sistemas micro-CHP y, en consecuencia, facilitar su futura comercialización masiva., This work was supported in part by the grant PID2021-124908NB-I00 founded by MCIN/AEI/10.13039/501100011033/ and by ERDF A way of making Europe ; and by the Generalitat Valenciana regional government through project CIAICO/2021/064.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Insertion Loss of Sonic Crystal Active Noise Barrier by Reinforcement Learning and Finite Difference Time Domain Simulations

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Galiana-Nieves, Jaime
  • Redondo, Javier|||0000-0002-5507-7799
  • Mangini, Agostino Marcello
  • Fanti, Maria Pia
[EN] Sonic crystal noise barriers (SCNB) have emerged as a promising solution for mitigating traffic noise pollution. These barriers utilize periodic structures to selectively reflect acoustic waves at specific target frequencies, offering the advantage of being permeable to light and wind. However, their installation and maintenance costs have hindered widespread adoption. In contrast, active noise control (ANC) systems leverage speakers and microphones to generate opposing sound waves that cancel out incoming noise, presenting a potentially cost-effective alternative. The efficacy of ANC, however, hinges on the precision of noise prediction models and control algorithms. Reinforcement Learning (RL) technique, an interdisciplinary area of machine learning, has shown promise in enhancing ANC systems by enabling them to adapt to changing noise conditions and achieve superior noise reduction, particularly in enclosed spaces. Despite these advancements, several challenges remain in applying RL to ANC systems for SCNB. This paper explores these challenges and proposes an RL-based solution for autonomous ANC systems within the context of SCNB, utilizing a Finite Difference Time Domain (FDTD) simulation environment to address low-frequency, moving sources, and outdoor propagation noise scenarios., This work was supported in part by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación of Spain through project MCIN/AEI/10.13039/501100011033 under Grant PID2021-124908NB-I00, and in part by the European Regional Development Fund (ERDF) A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Particle Swarm Optimization of Resonant Sonic Crystals Noise Barriers

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Redondo, Javier|||0000-0002-5507-7799
  • Mangini, Agostino Marcello
  • Fanti, Maria Pia
[EN] The study of technological materials made by meticulously arranging acoustic elements has received a lot of attention over the past three decades with the goal of generating improved acoustic properties, often going beyond the behavior of materials found in nature. These are frequently referred to as acoustic metamaterials, and because of the way wave propagation phenomena is managed, they exhibit unusual properties. Improvements in noise mitigation techniques of acoustic systems based on metamaterials principles have been made effectively and precisely using combined or hybrid numerical methods and improved numerical formulations. These noise mitigation properties should be optimized by modifying topology and inner elements properties, which requires a huge search space. This work focuses on metamaterials called sonic crystals with Helmholtz resonators, and its innovative insulation properties as noise barriers are optimized with the Particle Swarm Optimization (PSO). This evolutionary algorithm provides a mono objective solution for the multi-dimensional search space inspired in animal behavior looking for food and communicating between each other. In order to assess the results obtained by the proposed approach, the presented PSO algorithm is compared with a Genetic Algorithm (GA): the results show that the PSO algorithm provides a better solution that pursues the objective of satisfying the acoustic comfort without exceeding the imposed practical constraints, This work was supported in part by the Spanish Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación of Spain through project MCIN/AEI/10.13039/501100011033 under Grant PID2021-124908NB-I00, and in part by the European Regional Development Fund (ERDF) A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing Decentralized Multi-Variable Robust Controllers: A Multi-Objective Approach Considering Nearly Optimal Solutions

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] This article presents a new methodology for designing a robust, decentralized control structure that considers stochastic parametric uncertainty and uses a multi-objective approach. This design tunes the loop pairing and controller to be implemented. The proposed approach obtains the optimal and nearly optimal controllers relevant to the nominal scenario. Once obtained, the robustness of these solutions is analyzed. This methodology is compared with a traditional approach for selecting the most robust control pairings. The traditional approach obtains lightly robust controllers, i.e., the most robust controllers with an acceptable performance for the nominal scenario, and it obtains trade-offs between robustness and nominal performance. However, the traditional approach has a high computational cost because it is necessary to consider uncertainty in the optimization stage. The proposed approach mathematically guarantees the acquisition of at least one neighbor controller for each existing lightly robust controller. Therefore, this approach obtains solutions similar to lightly robust solutions with a significantly lower computational cost. Furthermore, the proposed approach provides the designer with more diversity and interesting solutions that are not lightly robust. The different approaches are compared using an example of a multi-variable process with two alternative control structures. The results show the usefulness of the proposed methodology., This work was supported, in part, by grant PID2021-124908NB-I00, which was funded by MCIN/AEI/10.13039/501100011033/; by "ERDF A way of making Europe"; and by the Generalitat Valenciana regional government through project CIAICO/2021/064.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Ajuste multiobjetivo de controladores robustos considerando soluciones casi óptimas relevantes, Multi-objective tuning of robust controllers considering relevant nearoptimal solutions

  • Pajares, Alberto
  • Blasco, Xavier
  • Herrero Durà, Juan Manuel
  • García-Nieto, Sergio
[Resumen] En este trabajo se muestra la utilidad de las soluciones casi óptimas relevantes en el ajuste mediante optimización multiobjetivo de controladores robustos ante incertidumbre en el modelo. Una posibilidad muy común para este ajuste es incorporar la incertidumbre en el proceso de optimización, por ejemplo, incorporando la evaluación de la robustez durante el proceso. El principal problema de este enfoque es que tiene un alto coste computacional. Para evitar este problema, en este trabajo se propone analizar la incertidumbre en la etapa de decisión tanto para las soluciones óptimas como para las casi óptimas relevantes. Estas soluciones alternativas proporcionan mayor diversidad, pudiendo resultar controladores más robustos que los óptimos. Se muestra un ejemplo de diseño multivariable mediante dos controladores PI. El proceso a controlar es un modelo lineal de dos entradas y dos salidas donde la incertidumbre se ha modelado con un conjunto de cincuenta escenarios (posibles modelos alternativos). El ejemplo muestra que existen zonas de prestaciones en las que los controladores casi óptimos relevantes pueden obtener una mayor robustez que los controladores óptimos., [Abstract] In this paper we show the usefulness of relevant near-optimal solutions in the multi-objective optimization tuning of robust controllers in presence of model uncertainty. A very common possibility for this tuning is to incorporate uncertainty in the optimization process, for example, by incorporating the evaluation of the robustness during the process. The main problem with this approach is that it has a high computational cost. To avoid this problem, this paper proposes to analyze uncertainty at the decision stage for both optimal and relevant near-optimal solutions. These alternative solutions provide greater diversity and may result in more robust controllers than the optimal ones. An example of multivariable design using two PI controllers is shown. The process to be controlled is a two-input, two-output linear model where uncertainty has been modeled with a set of fifty scenarios (possible alternative models). The example shows that there are performance areas where relevant near-optimal controllers can obtain higher robustness than optimal controllers., Este trabajo ha sido realizado gracias al apoyo de los proyectos PID2021-124908NB-I00 y PID2020-119468RA-I00 financiados MCIN/AEI/10.13039/501100011033/ y por ”FEDER Una manera de hacer hacer Europa”; y la ayuda SP20200109 (PAID-10-20) de la Universitat Politécnica de Valencia., Universitat Politècnica de València; SP20200109 (PAID-10-20)