Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges-Gutierrez, Hylenne
  • Martínez-Abad, Antonio
  • Marta Martínez-Sanz
  • Vilaplana Domingo, Francisco Javier
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe , by the European Union or by the European Union NextGenerationEU/PRTR . H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Valorisation of Watermelon and Persimmon Fruit Residues to Obtain Compounds of Interest in Food Applications

  • Méndez-Reyes, Daniel Alexander|||0000-0001-6414-305X
[ES] El objetivo de esta tesis doctoral ha sido la valorización de los residuos agroindustriales de los frutos de la sandía (Citrullus lanatus) y del caqui (Diospyros kaki Thunb.) para obtener compuestos de alto valor añadido con potenciales aplicaciones tecnológicas en la industria alimentaria. En concreto, la corteza de la sandía y los descartes del caqui se contemplan como una prometedora fuente de pectina, no sólo por la importancia económica de los cultivos, sino también por las interesantes características estructurales de la pectina extraída y sus propiedades funcionales. Además, se sabe que los frutos del caqui son una fuente de compuestos bioactivos que pueden utilizarse para diseñar productos alimentarios más saludables. En la primera parte de esta tesis, se llevó a cabo una metodología de superficie de respuesta para evaluar cómo afectan los diferentes parámetros del proceso a la composición, las características estructurales y el rendimiento de extracción de la pectina de la corteza de la sandía (WRP). A partir de estos resultados, se utilizó una combinación de herramientas reológicas, microestructurales y de dispersión para dilucidar el mecanismo de estabilización de la emulsión de WRP, que fue capaz de retener altas cantidades de aceite de girasol (>60%), evitando la coalescencia y la floculación. A continuación, se evaluó el efecto de la des-ramificación contralada enzimáticamente, la des-esterificación y la eliminación de proteínas, en la composición y la estructura molecular de la WRP, y se analizó en profundidad el potencial de la pectina tratada enzimáticamente para preparar hidrogeles con la adición de CaCl2, con el fin de comprender cómo la estructura de la pectina y la composición del extracto afectaban a la formación y las propiedades del gel. Se observó que las pequeñas cadenas laterales de arabinogalactano presentes en la pectina con bajo grado de esterificación, actuaban como refuerzo, induciendo la formación de redes más densamente empaquetadas y de hidrogeles más fuertes que sus homólogos menos ramificados. La pectina de sandía tratada enzimáticamente y con mejores propiedades de gelificación y rendimiento, se utilizó posteriormente para desarrollar estructuras de aerogeles utilizando secado con CO2 supercrítico. La formación de una estructura compactada durante la formación del aerogel lo convirtió en un buen candidato como sistemas de liberación de compuestos activos. En la segunda parte de la tesis, se estudió la potencial valorización de residuos de biomasa de caqui mediante la extracción de compuestos bioactivos y extractos ricos en pectina y la evaluación de sus propiedades funcionales. Un extracto rico en polifenoles obtenido a escala semi-industrial mostró actividad antiviral y fue capaz de reducir el envejecimiento celular y el contenido de grasa sin afectar al desarrollo del organismo modelo C. elegans. Además, se optimizaron y caracterizaron las condiciones de extracción de ingredientes funcionales a base de pectina y polifenoles, cuya composición dependió de la severidad de las condiciones de extracción. Estos extractos funcionales de pectina mostraron actividad antiviral, probablemente potenciada por la mayor estabilidad de los polifenoles que forman complejos con la pectina y se exploró, de manera exitosa, su aplicación como recubrimiento comestible en arándanos., [CA] L'objectiu d'aquesta tesi doctoral va ser la valorització de residus agroindustrials procedents de fruites de síndria (Citrullus lanatus) i caqui (Diospyros kaki Thunb.) per obtenir compostos d'alt valor afegit amb potencials aplicacions tecnològiques en la indústria alimentària. En concret, l'escorça de síndria i els descarts de caqui es preveuen com una prometedora font de pectina, no només per la importància econòmica dels cultius, sinó també per les interessants característiques estructurals de la pectina extreta i les propietats funcionals relacionades. A més, se sap que les fruites de caqui són una font de compostos bioactius que es poden utilitzar per dissenyar productes alimentaris més saludables. En la primera part d'aquesta tesi es va dur a terme una metodologia de superfície de resposta per avaluar com els diferents paràmetres de procés afecten la composició, les característiques estructurals i el rendiment d'extracció de la pectina de síndria (WRP). A partir dels resultats, es va utilitzar una combinació d'eines reològiques, microestructurals i de dispersió per dilucidar el mecanisme estabilitzador de l'emulsió de WRP, que va ser capaç de retenir altes quantitats d'oli de gira-sol (>60%), evitant la coalescència i la floculació. A continuació, es va avaluar l'efecte del de-brassament enzimàtic controlat, la des-esterificació i l'eliminació de proteïnes sobre la composició i l'estructura molecular del WRP i es va analitzar profundament el potencial de la pectina tractada enzimàticament per preparar hidrogels amb l'addició de CaCl2 per entendre com l'estructura de la pectina i la composició de l'extracte afectaven la formació i les propietats del gel. Es va observar que les petites cadenes laterals d¿arabinogalàctans presents a la pectina amb baix grau d'esterificació, actuaven com a reforç, induint la formació de xarxes més densament empaquetades i hidrogels més forts que els seus homòlegs menys ramificats. Posteriorment es va utilitzar la pectina de l'escorça de síndria tractada enzimàticament amb millors propietats gelificants i rendiment per desenvolupar estructures d'aerogel utilitzant CO2 supercrític. La formació d'una estructura compactada durant la formació d'aerogels la va convertir en un bon candidat per als sistemes de alliberació de compostos actius. En la segona part de la tesi es va estudiar la potencial valorització dels residus de biomassa de caqui mitjançant l'extracció de compostos bioactius i extractes rics en pectina i l'avaluació de les seves propietats funcionals. Un extracte obtingut a escala semi-industrialment ric en polifenols va mostrar una activitat antiviral i va ser capaç de reduir l'envelliment cel·lular i el contingut en greixos sense afectar el desenvolupament de l'organisme model de C. elegans. A més, es van optimitzar i caracteritzar les condicions d'extracció d'ingredients funcionals a base de pectina-polifenol, la composició de la qual depenia de la gravetat de les condicions d'extracció. Aquests extractes funcionals de pectina van mostrar una alta eficiència antiviral, probablement millorada per la major estabilitat dels polifenols com a complexos de pectina. De manera exitosa, es va explorar una potencial aplicació com a recobriment comestible sobre nabius., [EN] The aim of this doctoral thesis was the valorisation of agro-industrial wastes from watermelon (Citrullus lanatus) and persimmon (Diospyros kaki Thunb.) fruits to obtain high added-value compounds with potential technological applications in the food industry. Specifically, watermelon rind and persimmon discards are envisaged as a promising pectin source, not only because of the economic importance of the crops but also because of the interesting structural features of the extracted pectin and related functional properties. Furthermore, persimmon fruits are known to be a source of bioactive compounds which can be used to design healthier food products. In the first part of this thesis, a response surface methodology was carried out to evaluate how different process parameters affect the composition, structural features and extraction yield of watermelon rind pectin (WRP). Based on the results, a combination of rheological, microstructural and scattering tools was used to elucidate the emulsion stabilizing mechanism of WRP, which was able to retain high amounts of sunflower oil (>60%), avoiding coalescence and flocculation. Then, the effect of controlled enzymatic debranching, de-esterification and protein removal on WRP composition and molecular structure was evaluated and the potential of the enzymatically-treated pectin for preparing hydrogels with the addition of CaCl2 was deeply analysed in order to understand how pectin structure and extract composition affected gel formation and properties. It was observed that the small arabinogalactan side chains present in the pectin with low degree of esterification, acted as a reinforcement, inducing the formation of more densely packed networks and stronger hydrogels than their less-branched counterparts. An enzymatically-treated WRP with better gelling properties and yield was subsequently used to develop aerogel structures using supercritical CO2. The formation of a compacted structure during aerogel formation made it a good candidate for drug delivery systems. In the second part of the thesis, the potential valorisation of persimmon biomass waste through the extraction of bioactive compounds and pectin-rich extracts and the evaluation of their functional properties was studied. A semi-industrially scaled-up polyphenol-rich extract showed an effective antiviral efficiency and it was able to reduce the cellular ageing and fat content without affecting the development of C. elegans model organism. Furthermore, the extraction conditions of functional pectin-polyphenol-based ingredients were optimized and characterized, which composition was dependent on the severity of the extraction conditions. These functional pectin extracts showed high antiviral efficiency, probably enhanced by the higher stability of the polyphenols as pectin complexes. A successful potential application was explored with an edible coating on blueberries., This research was funded by grant RTI-2018-094268-B-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe". Mendez D. A. is supported by the Ministry of Science, Technology and Innovation (Minciencias) of the Colombian Government (783-2017). M. J. Fabra and A. Martinez- Abad are recipients of Ramon y Cajal (RYC-2014-158) and Juan de la Cierva (IJDC-2017- 31255), respectively, from the Spanish Ministry of Economy, Industry and Competitiveness. This work was also funded by the grant INNVAL10-19-009-CA8250 from Agència Valenciana d ́Innovació (AVI). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. (PTI-SusPlast+) is also acknowledged for financial support. Project INNEST/2021/27 was granted by Agencia Valenciana de Innovación (AVI) and co- financed by the European Union through the Operative Programme of FEDER from Comunitat Valenciana 2014-2020. We also appreciate the funding of the CERCA program (Centres de Recerca de Catalunya) of the Generalitat de Catalunya and from the CIEN project “BIOPRO” from CDTI. Nune Sahakyan is kindly acknowledged for experimental support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and Characterization of Gel-Like Structures from Aquatic Biomass for Food Applications, Obtención y caracterización de estructuras tipo gel a partir de biomasa acuática para aplicaciones alimentarias

  • Fontes Candia, Cynthia
[ES] El objetivo de esta tesis doctoral ha sido el diseño y caracterización estructural de estructuras tipo gel basadas de polisacáridos extraídos de biomasa acuática con interés para aplicaciones relacionadas con la alimentación. Las propiedades de los polisacáridos extraídos de algas y plantas acuáticas son adecuadas para producir diferentes estructuras tipo gel basadas en la formación de redes reticuladas, como hidrogeles, aerogeles y emulsion-gels. En la primera parte de esta tesis se investigaron los diferentes mecanismos de gelificación de polisacáridos sulfatados, así como los parámetros que afectan a la estructura y las propiedades funcionales de los hidrogeles obtenidos. En base a los resultados, se evaluó la potencial aplicación de los hidrogeles y aerogeles de agar y k-carragenato para encapsular una proteína alimentaria modelo como la caseína, explorando así el efecto protector contra la hidrólisis enzimática tras digestiones gastrointestinales simuladas. En la segunda parte de esta tesis, se desarrollaron estructuras de aerogeles mediante la valorización de una fuente de biomasa residual infrautilizada, como es el Arundo donax. Con esta biomasa se generaron fracciones celulósicas con diferentes grados de purificación y extractos bioactivos solubles en agua, que posteriormente se utilizaron para producir aerogeles bioactivos híbridos. La estructura altamente porosa y la elevada capacidad de sorción de los aerogeles los convierten en excelentes candidatos para la sustitución de las almohadillas absorbentes para mantener la calidad de los productos cárnicos envasados. Los emulsion-gels son reconocidos por su gran potencial como ingredientes funcionales en la industria alimentaria como modificadores de textura y como sustitutos de grasas sólidas. Además, pueden utilizarse como vehículo para la liberación controlada de compuestos bioactivos liposolubles. Así, en la última parte de esta tesis, se investigó la naturaleza de las interacciones entre los componentes en las formulaciones de emulsion-gels basadas en polisacáridos y se relacionó con su estructura y comportamiento mecánico y reológico. Después de estudiar el mecanismo de gelificación de los emulsion-gels de carragenato, estos sistemas se adaptaron y utilizaron para dos diferentes aplicaciones relevantes para los sectores de alimentación y biomedicina. En primer lugar, se produjeron y evaluaron estructuras gelificadas a partir de emulsion-gels de agar y k-carragenato y aerogeles cargados de aceite como encapsulantes de un bioactivo lipofílico como la curcumina. Los resultados mostraron que el tipo de polisacárido y el estado físico de las redes del gel tenían un impacto en la estructura de los productos de la digestión. Por otro lado, se evaluó el potencial de los emulsion-gels basados en polisacáridos sulfatados (k-carragenato y agar) para la producción de un material capaz de simular tejido graso. Los resultados evidencian que los emulsions-gels de agar son adecuadas para producir materiales que simulan las propiedades dieléctricas para imitar tejidos de bajo y alto contenido en agua., [CA] L'objectiu d'aquesta tesi doctoral ha sigut, el disseny i caracterització estructural d'estructures tipus gel, basades en polisacàrids extrets de biomassa aquàtica amb interès per a aplicacions relacionades amb l'alimentació. Les propietats dels polisacàrids extrets d'algues i plantes aquàtiques, són adequades per a produir diferents estructures tipus gel basades en la formació de xarxes reticulades, com a hidrogels, aerogels i emulsió-gels. En la primera part d'aquesta tesi es van investigar els diferents mecanismes de gelificació de polisacàrids sulfatats, així com els paràmetres que afecten l'estructura i les propietats funcionals dels hidrogels obtinguts. Sobre la base dels resultats, es va avaluar la potencial aplicació dels hidrogels i aerogels d'agar i k-carraguenina per a encapsular una proteïna alimentària model com la caseïna, explorant així l'efecte protector contra la hidròlisi enzimàtica després de digestions gastrointestinals simulades. A la segona part d'aquesta tesi, es van desenvolupar estructures d' aerogels mitjançant la valorització d'una font de biomassa residual infrautilitzada, com és el Arundo donax. Amb aquesta biomassa es van generar fraccions cel·lulòsiques amb diferents graus de purificació i extractes bioactius solubles en aigua, que posteriorment es van utilitzar per a produir aerogels bioactius híbrids. L'estructura altament porosa i l'elevada capacitat de sorció dels aerogels els converteixen en excel·lents candidats per a la substitució dels coixinets absorbents per a mantenir la qualitat dels productes carnis envasats. Els emulsió-gels són reconeguts pel seu gran potencial com a ingredients funcionals en la indústria alimentària com a modificadors de textura i com a substituts de greixos sòlids. A més, poden utilitzar-se com a vehicle per a l'alliberament controlat de compostos bioactius liposolubles. Així, a l'última part d'aquesta tesi, es va investigar la naturalesa de les interaccions entre els components dins les formulacions d' emulsió-gels basades en polisacàrids i es va relacionar amb la seua estructura i comportament mecànic i reològic. Després d'estudiar el mecanisme de gelificació dels emulsió-gels de carraguenina, aquests sistemes es van adaptar i es van utilitzar per a dues aplicacions diferents, rellevants per als sectors de l' alimentació i la biomedicina. En primer lloc, es van produir i van avaluar estructures gelificades a partir de emulsió-gels d'agar i k-carraguenina i aerogels carregats d'oli com a encapsulants d'un bioactiu lipofílic com la curcumina. Els resultats van mostrar que el tipus de polisacàrid i l'estat físic de les xarxes del gel tenien un impacte en l'estructura dels productes de la digestió. D'altra banda, es va avaluar el potencial dels emulsió-gels basats en polisacàrids sulfatats (k-carraguenina i agar) per a la producció d'un material capaç de simular teixit gras. Els resultats evidencien que els emulsió-gels d'agar són adequats per a produir materials que simulen les propietats dielèctriques podentimitar teixits de baix i alt contingut en aigua., [EN] The aim of this doctoral thesis was to design and characterize the structure of gel-like structures based on polysaccharides extracted from aquatic biomass, with interest for food-related applications. The properties of polysaccharides extracted from seaweeds and aquatic plants make them suitable to produce a range of gel-like structures based on the formation of interconnected networks, such as hydrogels, aerogels and emulsion-gels. In the first part of this thesis, the different gelation mechanism of sulphated polysaccharides and the parameters affecting the structure and functional properties of the obtained hydrogels were investigated. Based on the results, the potential application of agar and k-carrageenan hydrogels and aerogels to encapsulate a model food protein such as casein was evaluated, thus exploring the protective effect against the enzymatic hydrolysis upon simulated gastrointestinal digestions. In the second part of this thesis, aerogel structures were developed by valorising an underutilized waste biomass source such as Arundo donax. This biomass was used to generate cellulosic fractions with different purification degrees and water-soluble bioactive extracts, which were subsequently used to produce hybrid bioactive aerogels. The highly porous structure and high sorption capacity of aerogels make them excellent candidates for the replacement of absorbent pads to maintain the quality of packaged meat products. Emulsion-gels are recognized for their great potential as functional ingredients in the food industry to modify texture and for solid fat replacement. Moreover, they can be used as a delivery vehicle for the controlled release of fat-soluble bioactive compounds. Thus, in the last part, the nature of interactions between the components in polysaccharide-based emulsion-gel formulations was investigated and related to their structure and mechanical and rheological behavior. After studying the gelation mechanism of carrageenan emulsion-gels, these systems were adapted and used for two different applications relevant to the food and biomedicine sectors. Firstly, oil-filled gel-like structures from agar and k-carrageenan emulsion-gels and oil-filled aerogels were produced and evaluated as carriers of a lipophilic bioactive such as curcumin. The results showed that the polysaccharide type and the physical state of the gel network had an impact on the structure of the digestion products. On the other hand, the potential of emulsion-gels based on sulphated polysaccharides (k-carrageenan and agar) for the production of tissue mimicking phantoms was evaluated. The results evidence that the agar emulsion-gels are suitable to produce materials simulating the dielectric properties to mimic low- and high-water content tissues., Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (2018022638 project). This work was financially supported by the grant RTI2018-094268-B-C22 (MCIU/AEI/FEDER, UE). Part of this work was supported by the COST Action ES1408 European network for algal-bioproducts (EUALGAE). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). The projects RTI2018-094268-B-C22 and RTI2018-094408-J-I00 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work has also received financial support from project PID2019-107663RB-I00 from the Spanish Ministry of Science and Innovation (MICINN). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, Maria José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
[EN] The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respec-tively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, tex-turizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges fi-nancial support from the Generalitat Valenciana for the award of a Santiago Grisol?a grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biorefinery of the relevant brown algae Saccharina latissima and Ascophylum nodosum towards novel, sustainable and functional ingredients

  • Bojorges Gutiérrez, Hylenne
[ES] Esta tesis doctoral pretende aportar conocimientos fundamentales y prácticos sobre la valorización de las algas pardas. Se ha tratado de comprender la relación entre la estructura y funcionalidad de sus polisacáridos y proteínas, considerando sus propiedades funcionales, tecnológicas y bioactivas. Todo ello se ha abordado desde una perspectiva de biorrefinería, enfocada a la economía circular y la sostenibilidad. En primer lugar, se ha llevado a cabo una optimización para la extracción de compuestos valiosos a partir de algas pardas utilizando diversas tecnologías innovadoras. Se investigó un pretratamiento a alta presión de algas pardas (A. nodosum y S. latissima) para extraer alginato y se comparó con el método de extracción convencional. El objetivo era comprender cómo las diferencias iniciales en la composición y estructura de la pared celular de las algas afectaban a la extracción de este polisacárido y a sus propiedades tecnológicas, así como, su capacidad como emulsionante y gelificante. Asimismo, se examinó la extracción de conjugados proteína-polisacárido mediante la aplicación secuencial de varios métodos de extracción, así como sus propiedades funcionales (capacidad de retención de agua y aceite, emulsionante) y bioactivas (actividad antioxidante y capacidad antihipertensiva). En estos estudios se observaron diferencias en la arquitectura de la pared celular de las algas, pertenecientes a distintos órdenes, como Fucales y Laminariales, que influyeron directamente en los compuestos extraídos y en sus propiedades estructurales y tecnológicas. Sin embargo, a pesar de estas diferencias, los resultados mostraron el potencial de los compuestos extraídos como ingredientes en la industria alimentaria y farmacéutica. La segunda sección de esta tesis exploró la valorización de los subproductos generados durante la extracción del alginato. Se realizó un estudio exhaustivo de todas las fracciones y subproductos producidos en este proceso con el objetivo de identificar las fracciones más prometedoras para su valorización. Los resultados mostraron que los residuos sólidos tenían el potencial más significativo debido a su composición fisicoquímica. Por lo tanto, se sugirieron posibles estrategias para valorizar estos residuos, destacando su alto potencial como ingredientes bioactivos, texturizantes o de valor añadido nutricional para aplicaciones alimentarias, de piensos, cosméticos y farmacéuticos. Además, a partir de este trabajo, se investigó la extracción secuencial y combinada por diferentes métodos para recuperar la mayor cantidad posible de proteína intracelular de estos residuos sólidos. Se comprobó que la fracción proteica de los extractos contenía un alto porcentaje de aminoácidos esenciales, adecuadas propiedades funcionales y una interesante actividad antihipertensiva. Finalmente, la tercera parte de esta tesis se centró en la generación de conocimiento a través de la elucidación estructural del alginato. Para ello, se desarrolló un método rápido para determinar la relación M/G del alginato, que mostró valores cercanos al método de referencia (1H NMR), demostrando su precisión. En conjunto, esta tesis doctoral representa un avance significativo en la generación de conocimiento y valorización de la biomasa algal y sus residuos en compuestos de alto valor. Además, estos enfoques son potencialmente aplicables a otras biomasas algales., [CA] Esta tesi doctoral pretén aportar coneixements fonamentals i pràctics sobre la valorització de les algues marrons. S'ha tractat de comprendre la relació entre l'estructura i funcionalitat dels seus polisacàrids i proteïnes, considerant les seues propietats funcionals, tecnològiques i bioactivas. Tot això s'ha abordat des d'una perspectiva de biorrefinería, enfocada a l'economia circular i la sostenibilitat. En primer lloc, s'ha dut a terme una optimització per a l'extracció de compostos valuosos a partir d'algues marrons utilitzant diverses tecnologies innovadores. Es va investigar un pretractament a alta pressió d'algues marrons (A. nodosum i S. latissima) per a extraure alginat i es va comparar amb el mètode d'extracció convencional. L'objectiu era comprendre com les diferències inicials en la composició i estructura de la paret cel·lular de les algues afectaven l'extracció d'este polisacàrid i a les seues propietats tecnològiques, així com, la seua capacitat com a emulsionant i gelificant. Així mateix, es va examinar l'extracció de conjugats proteïna-polisacàrid mitjançant l'aplicació seqüencial de diversos mètodes d'extracció, així com les seues propietats funcionals (capacitat de retenció d'aigua i oli, emulsionant) i bioactivas (activitat antioxidant i capacitat antihipertensiva). En estos estudis es van observar diferències en l'arquitectura de la paret cel·lular de les algues, pertanyents a diferents ordes, com Fucales i Laminariales, que van influir directament en els compostos extrets i en les seues propietats estructurals i tecnològiques. No obstant això, malgrat estes diferències, els resultats van mostrar el potencial dels compostos extrets com a ingredients en la indústria alimentària i farmacèutica. La segona secció d'esta tesi va explorar la valorització dels subproductes generats durant l'extracció de l'alginat. Es va realitzar un estudi exhaustiu de totes les fraccions i subproductes produïts en este procés amb l'objectiu d'identificar les fraccions més prometedores per a la seua valorització. Els resultats van mostrar que els residus sòlids tenien el potencial més significatiu a causa de la seua composició fisicoquímica. Per tant, es van suggerir possibles estratègies per a valorar estos residus, destacant el seu alt potencial com a ingredients *bioactivos, texturitzants o de valor afegit nutricional per a aplicacions alimentàries, de pinsos, cosmètics i farmacèutics. A més, a partir d'este treball, es va investigar l'extracció seqüencial i combinada per diferents mètodes per a recuperar la major quantitat possible de proteïna intracel·lular d'estos residus sòlids. Es va comprovar que la fracció proteica dels extractes contenia un alt percentatge d'aminoàcids essencials, adequades propietats funcionals i una interessant activitat antihipertensiva. Finalment, la tercera part d'esta tesi es va centrar en la generació de coneixement a través de l'elucidació estructural de l'alginat. Per a això, es va desenvolupar un mètode ràpid per a determinar la relació M/G de l'alginat, que va mostrar valors pròxims al mètode de referència (1H NMR), demostrant la seua precisió. En conjunt, esta tesi doctoral representa un avanç significatiu en la generació de coneixement i valorització de la biomassa algal i els seus residus en compostos d'alt valor. A més, estos enfocaments són potencialment aplicables a altres biomasses algals., [EN] This doctoral thesis aims to provide fundamental and practical knowledge on the valorization of brown seaweeds. It has sought to understand the relationship between the structure and functionality of their polysaccharides and proteins, considering their functional, technological and bioactive properties. All this has been approached from a biorefinery perspective, focused on circular economy and sustainability. First, an optimization for extracting valuable compounds from brown seaweeds was carried out using various innovative technologies. A high-pressure pre-treatment of brown seaweeds (Ascophyllum nodosum and Saccharina latissima) to extract alginate was investigated and compared with the conventional extraction method. The purpose was to understand how initial differences in algal cell wall composition and structure affected the extraction of this polysaccharide and its technological properties, such as its ability as emulsifier and gelling agent. Likewise, the extraction of protein-polysaccharide conjugates was examined by sequential application of several extraction methods, as well as their functional properties (water, oil retention activity and emulsifying capacity) and bioactive properties (antioxidant activity and antihypertensive capacity). In these studies, differences were observed in the cell wall architecture of the algae, belonging to different orders, such as Fucales and Laminariales, which directly influenced the extracted compounds and their structural and technological properties. However, despite these differences, the results showed the potential of the extracted compounds as ingredients in the food and pharmaceutical industries. The second section of this thesis explored the valorization of by-products generated during alginate extraction. An exhaustive study of all the fractions and by-products produced in this process was carried out to identify the most promising fractions for valorization. The results showed that solid wastes had the most significant potential due to their physicochemical composition. Therefore, possible strategies to valorize these wastes were suggested, highlighting their high potential as bioactive, texturizing, or nutritional value-added ingredients for food, feed, cosmetic, and pharmaceutical applications. Besides, from this work, sequential and combined extraction by different methods was investigated to recover as much intracellular protein as possible from these solid wastes. It was found that the protein fraction of the extracts contained a high percentage of essential amino acids, adequate functional properties, and an interesting antihypertensive activity. Finally, the third part of this thesis focused on generating knowledge through the structural elucidation of alginate. For this purpose, a rapid method was developed to determine the M/G ratio of alginate, which showed values close to the reference method (1H NMR), demonstrating its accuracy. Overall, this PhD thesis represents a significant advance in generating knowledge and valorizing algal biomass and its residues into high-value compounds. Furthermore, these approaches are potentially applicable to other algal biomasses., The authors wish to acknowledge funds from the grants PID2022- 138328OB-C21 and CEX2021-001189-S funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007). The authors acknowledge funds from the project PID2020-117744RJ-I00 and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. Additionally, the Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged. H. Bojorges expresses gratitude for the financial assistance provided by the Generalitat Valenciana in the form of a Santiago Grisolía grant (GRISOLIAP/2019/007)
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Bioactive extracts from persimmon waste: influence of extraction conditions and ripeness

  • Méndez, Daniel Alexander
  • Fabra, María José
  • Falcó, Irene
  • Sánchez, Gloria
  • Aranaz, Paula
  • Vettorazzi, Ariane
  • Ribas-Agustí, Albert
  • González-Navarro, Carlos Javier
  • Castellari, Massimo
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
In this work, a bioactive persimmon extract was produced from discarded fruits. A central composite design was used to evaluate the effect of different extraction parameters and ripeness stages of persimmon fruits on the total phenolic content and antioxidant activity of the resulting extracts. Significantly greater phenolic contents were obtained from immature persimmon (IP) fruits. The optimum IP extract with the conditions set by the experimental design was industrially up-scaled and its composition and functional properties were evaluated and compared with those obtained under lab-scale conditions. Both extracts contained significant protein (>20%) and phenolic contents (∼11–27 mg GA/g dry extract) and displayed significant antiviral activity against murine norovirus and hepatitis A virus. Moreover, the extract showed no toxicity and significantly reduced the fat content and the cellular ageing of Caenorhabditis elegans (C. elegans) without affecting the worm development. These effects were mediated by down-regulation of fat-7, suggesting an anti-lipogenic activity of this extract., info:eu-repo/semantics/publishedVersion
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Emulsion gels and oil-filled aerogels as curcumin carriers: Nanostructural characterization of gastrointestinal digestion products

  • Fontes-Candia, Cynthia
  • Martínez, Juan Carlos
  • López-Rubio, Amparo
  • Salvia Trujillo, Laura
  • Martín Belloso, Olga
  • Martínez-Sanz, Marta
Agar and κ-carrageenan emulsion gels and oil-filled aerogels were investigated as curcumin carriers and their structure and mechanical properties, as well as their structural changes upon in vitro gastrointestinal digestion were characterized. Agar emulsion gels presented stiffer behaviour, with smaller and more homogeneous oil droplets (ϕ ∼ 12 µm) than those from κ-carrageenan (ϕ ∼ 243 µm). The structure of κ-carrageenan gels was characterized by the presence of rigid swollen linear chains, while agar produced more branched networks. After simulated gastrointestinal digestion bile salt lamellae/micelles (∼5 nm) and larger vesicles of partially digested oil (Rg ∼ 20–50 nm) were the predominant structures, being their proportion dependent of the polysaccharide type and the physical state of the gel network. The presence of curcumin induced the formation of larger vesicles and limited the formation of mixed lamellae/micelles., The projects RTI2018-094268-B-C22 and RTI-2018-094268-B-C21 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron (2019103981 project).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Polysaccharide-based structured lipid carriers for the delivery of curcumin: An in vitro digestion study

  • Velderrain Rodríguez, Gustavo R.
  • Fontes-Candia, Cynthia
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
  • Martín Belloso, Olga
  • Salvia Trujillo, Laura
The present work aimed at studying the in vitro digestion fate of κ-carrageenan (KC) or agar (AG) emulsion gels (EG), and KC oil-filled aerogels (OAG) in terms of their structural changes, lipolysis kinetics and curcumin bioaccessibility. On the one hand, both EG and aerogels showed large (70–200 µm) and heterogeneous particles after gastric conditions, indicating the release of bulk oil and gelled material. Nonetheless, this material release in the stomach phase was lower in the case of EG-AG and OAG-KC compared to EG-KC. After small intestinal conditions, EG and oil-filled aerogels presented a wide range of particle sizes probably due to the presence of undigested lipid material, gelled structures, as well as lipid digestion products. For the most part, adding curcumin to the structures’ lipid phase did not cause of the structural modifications that occurred at the different in vitro digestion phases. On the other hand, the lipolysis kinetics was different depending on the type of structure. Amongst emulsion-gels, those formulated with κ-carrageenan presented a slower and lower lipolysis kinetics compared to those formulated with agar, which could be attributed to their higher initial hardness. Overall, the addition of curcumin in the lipid phase decreased the lipolysis in all the structures, which evidenced its interference in the lipid digestion process. The curcumin bioaccessibility reached high values (≈ 100 %) for all the studied structures, presenting a high solubility in intestinal fluids. This work unravels the implications of microstructural changes of emulsion-gels and oil-filled aerogels during digestion and their impact on their digestibility and subsequent functionality., This study was funded by the Ministry of Science, Innovation and Universities throughout the projects RTI2018–094268-B-C21 (University of Lleida) and RTI2018–094268-B-C22 (Agencia Estatal Consejo Superior de Investigaciones Cientificas (CSIC)). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Influence of the extraction conditions on the carbohydrate and phenolic composition of functional pectin from persimmon waste streams

  • Méndez, D. A.
  • Fabra, M. J.
  • Odriozola Serrano, Isabel
  • Martín Belloso, Olga
  • Salvia Trujillo, Laura
  • López-Rubio, Amparo
  • Martinez Abad, A.
Persimmon fruit (Diospyros kaki Thunb.) production suffers great losses (15–20%) due to the inefficient overripening process. In order to valorise this waste, a compositional characterization of different fruit stages of the residues was done, and immature fruit was selected due to its high pectin and very high polyphenol content. A 3-level full factorial design was carried out to study the effect of temperature (70–95 °C) and low pH (0.5–1.5), on yield, degree of esterification, carbohydrate constituents, phenolic content and antioxidant capacity of the extracted pectin, and a complete polyphenol profile (UPLC-MS/MS) was performed on selected extracts. All responses could be accurately adjusted to the models (R2 > 80; lack of fit). Pectin yield, phenolic compounds and antioxidant activity ranged from 1.4 to 4.5%, 53.3 ± 2.27 to 111.7 ± 9.74 mg GAE/g pectin and 0.29 ± 0.01 to 2.77 ± 0.04 TEAC (Trolox μmol/mg pectin), respectively. A strong pectin-polyphenol interaction was found, which significantly enhanced acid resistance of both the pectin and polyphenol constituents, with optimum yield and polyphenol content at pH 1 and 95 °C. These new pectin-based ingredients might have a great potential as functional foods or natural food ingredients enhancing the quality and shelf-life., This work was funded by grant RTI-2018-094268-B-C21 and RTI2018-094268-B-C22 (MCIU, AEI; FEDER, UE) . Mendez D. A. is supported by the Ministry of Science Technology and Innovation of the Colombian Government (783-2017) . A. Martinez-Abad is recipient of JdC (IJDC-2017-31255) contract from the Spanish Ministry of Economy, Industry and Competitiveness.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling the Extraction of Pectin towards the Valorisation of Watermelon Rind Waste

  • Méndez, Daniel A.
  • Fabra, María José
  • Gómez-Mascaraque, Laura G.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
Watermelon is the second largest fruit crop worldwide, with great potential to valorise its rind waste. An experimental design was used to model how extraction parameters (temperature, pH, and time) impact on the efficiency of the process, purity, esterification degree, monosaccharide composition and molar mass of watermelon rind pectin (WRP), with an insight on changes in their structural properties (linearity, branching degree and extraction severity). The models for all responses were accurately fitted (R2 > 90%, lack of fit p ≥ 0.05) and experimentally validated. At optimum yield conditions, WRP yield (13.4%), purity (540 µg/g galacturonic acid) and molar mass (106.1 kDa) were comparable to traditional pectin sources but showed a higher branching degree with longer galactan side chains and a higher protein interaction. Harsher conditions (pH 1) generated purer homogalacturonan fractions with average molar masses (80 kDa) at the expense of yield, while mild extraction conditions (pH ≥ 2) produced highly branched entangled pectin structures. This study underlines novel compositional features in WRP and the possibility of producing novel customized pectin ingredients with a wider potential application scope depending on the targeted structure., This research was funded by the grant RTI-2018-094268-B-C22 (MCI/AEI/FEDER, EU). Mendez D. A. is supported by the Ministry of Science, Technology and Innovation (Minciencias) of the Colombian Government (783-2017). M. J. Fabra and A. Martinez-Abad are recipients of Ramon y Cajal (RYC-2014-158) and Juan de la Cierva (IJDC-2017-31255), respectively, from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the different emulsification mechanisms of pectin: Comparison between watermelon rind and two commercial pectin sources

  • Méndez, Daniel A.
  • Fabra, María José
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
  • Gorria, Marta
  • López-Rubio, Amparo
In this work, an advanced approach combining small angle X-ray scattering (SAXS) experiments, rheology and confocal laser scanning microscopy was used to explain the different emulsification mechanisms of three pectin sources (pectin extracted from watermelon rind -WRP- and commercial citrus -CP- and apple pectin -AP). Very interestingly, three different emulsification mechanisms were identified, related to the structure and composition of the pectin extracts. WRP had significantly greater emulsifying capacity than commercial CP and AP. This enhanced emulsification ability was mainly ascribed to a combination of its relatively high protein content (mainly acting as the surface-active material), combined with the presence of longer sugar side chains in pectin, further contributing to stabilizing the oil droplets in the emulsions. All these structural features resulted in a reduction in the mean droplet size as the concentration increased, thus, hindering flocculation and coalescence during the short-term storage conditions at 4 °C. In contrast, AP had the lowest emulsification capacity, which was only related to its viscosifying effect (provided by its greater Mw), while CP, having the greatest homogalacturonan content, greatest linearity and a more balanced hydrophilic/hydrophobic character (reflected in the degree of esterification), was able to form a better adsorbed layer at the o/w interphase, although it could not avoid flocculation and creaming at low pectin concentration during refrigerated storage., This work was funded by the grant RTI-2018-094268-B-C22 (MCI/AEI/FEDER, EU). Mendez D. A. is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government (783–2017). M. J. Fabra and A. Martinez-Abad are recipients of Ramon y Cajal (RYC-2014-158) and Juan de la Cierva (IJDC-2017-31255), respectively, from the Spanish Ministry of Economy, Industry and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioactive extracts from persimmon waste: influence of extraction conditions and ripeness

  • Méndez, Daniel A.
  • Fabra, María José
  • Falcó, Irene
  • Sánchez Moragas, Gloria
  • Aranaz, Paula
  • Vettorazzi, Ariane
  • Ribas Agustí, Albert
  • González Navarro, Carlos Javier
  • Castellari, Massimo
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
In this work, a bioactive persimmon extract was produced from discarded fruits. A central composite design was used to evaluate the effect of different extraction parameters and ripeness stages of persimmon fruits on the total phenolic content and antioxidant activity of the resulting extracts. Significantly greater phenolic contents were obtained from immature persimmon (IP) fruits. The optimum IP extract with the conditions set by the experimental design was industrially up-scaled and its composition and functional properties were evaluated and compared with those obtained under lab-scale conditions. Both extracts contained significant protein (>20%) and phenolic contents (∼11–27 mg GA/g dry extract) and displayed significant antiviral activity against murine norovirus and hepatitis A virus. Moreover, the extract showed no toxicity and significantly reduced the fat content and the cellular ageing of Caenorhabditis elegans (C. elegans) without affecting the worm development. These effects were mediated by down-regulation of fat-7, suggesting an anti-lipogenic activity of this extract., This work was financially supported by the grant RTI-2018-094268-B-C22 (MCI/AEI/FEDER, EU). Mendez D. A. is supported by the Ministry of Science, Technology and Innovation (Minciencias) of the Colombian Government (783-2017). M. J. Fabra and A. Martinez-Abad are recipients of Ramon y Cajal (RYC-2014-158) and Juan de la Cierva (IJDC-2017-31255), respectively, from the Spanish Ministry of Economy, Industry and Competitiveness. We also appreciate the funding of the CERCA program (Centres de Recerca de Catalunya) of the Generalitat de Catalunya and from the CIEN project “BIOPRO” from CDTI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the extraction conditions on the carbohydrate and phenolic composition of functional pectin from persimmon waste streams

  • Méndez, Daniel Alexander
  • Fabra, María José
  • Odriozola-Serrano, I.
  • Martín-Belloso, Olga
  • Salvia Trujillo, L.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
Persimmon fruit (Diospyros kaki Thunb.) production suffers great losses (15–20%) due to the inefficient overripening process. In order to valorise this waste, a compositional characterization of different fruit stages of the residues was done, and immature fruit was selected due to its high pectin and very high polyphenol content. A 3-level full factorial design was carried out to study the effect of temperature (70–95 °C) and low pH (0.5–1.5), on yield, degree of esterification, carbohydrate constituents, phenolic content and antioxidant capacity of the extracted pectin, and a complete polyphenol profile (UPLC-MS/MS) was performed on selected extracts. All responses could be accurately adjusted to the models (R2 > 80; lack of fit). Pectin yield, phenolic compounds and antioxidant activity ranged from 1.4 to 4.5%, 53.3 ± 2.27 to 111.7 ± 9.74 mg GAE/g pectin and 0.29 ± 0.01 to 2.77 ± 0.04 TEAC (Trolox μmol/mg pectin), respectively. A strong pectin-polyphenol interaction was found, which significantly enhanced acid resistance of both the pectin and polyphenol constituents, with optimum yield and polyphenol content at pH 1 and 95 °C. These new pectin-based ingredients might have a great potential as functional foods or natural food ingredients enhancing the quality and shelf-life., This work was funded by grant RTI-2018-094268-B-C21 and RTI2018-094268-B-C22 (MCIU, AEI; FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of polysaccharide-casein gel-like structures resistant to in vitro gastric digestion

  • Fontes Candia, Cynthia
  • Jiménez-Barrios, Pablo
  • Miralles, Beatriz
  • Recio, Isidra
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Controlling protein digestion is a promising strategy to modulate hormonal responses involved in satiety and appetite regulation. In this context, polysaccharide-casein gel-like structures have been developed and subjected to in-vitro gastrointestinal digestions to evaluate their potential for delaying casein hydrolysis. The effect of the polysaccharide type (agar vs. κ-carrageenan), the polysaccharide:casein ratio and the physical state of the structures (hydrogels vs. aerogels) on the protection ability was investigated. The microstructure evolution of the materials upon the digestions was studied and the molecular weight distribution and peptidomic profile of the digestion products were also determined. During the gastric phase most of the developed structures exerted a protective effect and intact casein clusters were even detected in some of the formulations. In contrast, during the intestinal phase most of the casein was released and hydrolysed to a certain extent. In general, the hydrogels showed a greater protective effect than the aerogels, due to a limited diffusion of the protein towards the liquid medium. Moreover, a higher polysaccharide:protein ratio produced stronger gel networks which provided greater protection. In particular, agar-based and κ-carrageenan hydrogels with 25% polysaccharide and agar-based aerogels with 75% polysaccharide would be the most optimum for delaying casein digestion, since they were able to preserve intact casein after the gastric phase while promoting the release of peptides during the intestinal phase., The projects RTI2018-094268-B-C22 and RTI2018-094408-J-I00 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work has also received financial support from project PID2019-107663RB-I00 from the Spanish Ministry of Science and Innovation (MICINN). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emulsion gels and oil-filled aerogels as curcumin carriers: Nanostructural characterization of gastrointestinal digestion products

  • Fontes Candia, Cynthia
  • Martínez, Juan Carlos
  • López-Rubio, Amparo
  • Salvia Trujillo, Laura
  • Martín-Belloso, Olga
  • Martínez Sanz, Marta
Agar and κ-carrageenan emulsion gels and oil-filled aerogels were investigated as curcumin carriers and their structure and mechanical properties, as well as their structural changes upon in vitro gastrointestinal digestion were characterized. Agar emulsion gels presented stiffer behaviour, with smaller and more homogeneous oil droplets (ϕ ∼ 12 µm) than those from κ-carrageenan (ϕ ∼ 243 µm). The structure of κ-carrageenan gels was characterized by the presence of rigid swollen linear chains, while agar produced more branched networks. After simulated gastrointestinal digestion bile salt lamellae/micelles (∼5 nm) and larger vesicles of partially digested oil (Rg ∼ 20-50 nm) were the predominant structures, being their proportion dependent of the polysaccharide type and the physical state of the gel network. The presence of curcumin induced the formation of larger vesicles and limited the formation of mixed lamellae/micelles., The projects RTI2018-094268-B-C22 and RTI2018-094268-B-C21 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron (2019103981 project)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, María José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respectively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, texturizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrosprayed Agar Nanocapsules as Edible Carriers of Bioactive Compounds

  • Tomadoni, Barbara
  • Fabra, María José
  • Méndez, Daniel Alexander
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
Electrosprayed agar nanocapsules were developed using an acetic acid solution as solvent. The role of solution properties (viscosity, surface tension, and conductivity) in the formation of agar particles was assessed, together with the effect of both agar and acetic acid concentrations on the size and morphology of the resulting particles. Agar solutions with a concentration below 10% w/v were not suitable for electrospraying. Furthermore, the agar-acetic acid ratio was also critical for the formation of agar nanostructures (with an optimum ratio of 1:2). A decrease in particle size was also observed when decreasing agar concentration, with particle diameter values ranging between 50 and 400 nm. Moreover, the suitability of the electrosprayed agar nanocapsules as carriers for a model bioactive compound, chlorophyllin sodium copper salt (CHL), was also evaluated. The release profile of encapsulated CHL, with an estimated encapsulation efficiency of around 40%, was carried out in food simulants with different hydrophilicity (10% v/v and 50% v/v ethanol). While the release of the bioactive was negligible in the hydrophilic food simulant, an initial burst release followed by a slower sustained release was observed when the capsules were immersed in 50% ethanol solution. The results open up a broad range of possibilities that deserve further exploration related to the use of these edible polysaccharide-based nanocapsules., This research was funded by Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT, Argentina), grant number PICT-2018-0970, and by the grant RTI-2018-094268-B-C22 (MCI/AEI/FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waste biomass valorisation for the development of sustainable cellulosic aerogels and their sound absorption properties

  • Benito González, Isaac
  • Cucharero, Jose
  • Al Haj, Yazan
  • Hänninen, Tuomas
  • Lokki, Tapio
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Vapaavuori, Jaana
Novel and more sustainable sound absorbing materials are produced through the valorization of waste biomass sources by following circular economy principles. Cellulosic nanocrystals (CNC) were extracted from Posidonia oceanica dead leaves, spent barely grains, and kale stems (KS) using a simplified purification protocol. These nanocrystals are used to prepare cellulosic aerogels, evaluating the effect of three parameters, namely, concentration (0.5–4%), CaCl2 and poly(lactic acid) (PLA) incorporation (hybrid aerogels), on their sound absorption properties. Aerogels from 4% suspensions show the highest sound absorption, outperforming benchmark rockwool and polyester—two modern commonly-used sound absorbers. Moreover, PLA coating also improves the sound absorption performance of the most aerogels. CNC from KS aerogels are selected as the optimum at both high (500–6000 Hz) and low (100–1500 Hz) frequency ranges. Overall, these results represent a new proof-of-concept of waste biomass conversion to high-performance cellulosic aerogels that have excellent sound absorbing properties., This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Grant RTI2018-094268-B-C22 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was a part of the Academy of Finland's Flagship Programme under Projects No. 318890 and 318891 (Competence Center for Materials Bioeconomy, FinnCERES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring structural, rheological and gelling properties of watermelon rind pectin by enzymatic treatments

  • Méndez, Daniel A.
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
In this work, pectin extracts from watermelon rind (WRP) were enzymatically treated to evaluate their potential for preparing hydrogels with the addition of CaCl2. Based on a previous work, two different conditions were selected to obtain WRP extracts according to the 1) highest yield (OP) or 2) highest yield without negatively affecting the branching and native structure of pectin (OPA). Firstly, both WRP extracts were enzymatically modified using different treatments (de-esterification and/or de-branching of galacturonic and arabinose side chains, and deproteinization), and their impact on the esterification degree, monosaccharide composition and changes on their structural properties (linearity and branching degree) were analysed. Then, the effect of the structural properties of the resulting pectin on the rheological behaviour and nanostructure of the hydrogels was investigated. The presence of long branched side chains and high methyl-esterified galacturonic acid chains promoted the formation of weaker hydrogels whereas de-esterification of the original pectin enabled intermolecular association giving rise to stronger hydrogels with the formation of ordered and densely packed structures (as deduced from SAXS results). However, the presence of small arabinogalactans side chains in the de-branched and de-esterified pectin extracts acted as reinforcement agents, inducing the formation of more densely packed networks and stronger hydrogels than their less-branched counterpart. These results demonstrated the impact of the pectin structure on the hydrogel-forming capacity., Grant RTI-2018-094268-B-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work was also funded by the grant INNVAL10-19-009 - CA8250 from Agència Valenciana d'Innovació (AVI). D.A. Méndez. is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government (783–2017). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. (PTI-SusPlast+) is also acknowledged for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges, Hylenne
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
  • Rodrigo Aliaga, Dolores
  • Vilaplana, Francisco
  • López-Rubio, Amparo
  • Fabra, María José
The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable bioactive pectin-based films to improve fruit safety via a circular economy approach

  • Méndez, Daniel A.
  • Falcó, Irene
  • Martínez-Abad, Antonio
  • Sánchez, Gloria
  • López-Rubio, Amparo
  • Fabra, María José
This work reports on the valorisation of persimmon (Diospyros kaki Thunb.) for the development of food-grade antiviral coatings against major viral foodborne pathogens, human noroviruses (NoVs) and hepatitis A virus (HAV). Initially, the antiviral activity of polyphenol-rich pectin extracts with abundant non-covalent interactions (PPN), pectin extracts enriched with intact pectin-polyphenol ester and O-glycosyl bonds (PPC) and hydro-ethanolic polyphenol-rich extracts (EPE) was compared. Higher viral reductions were found for the pectin extracts rich in polyphenols, mainly in those containing covalent pectin-polyphenol interactions. This specific extract was mixed with commercial citrus pectin (CP) to develop active edible films. Dry films were analysed in terms of their optical, morphological, mechanical and barrier properties. Addition of the bioactive pectin persimmon extract resulted in more coloured films with lower transparency. The presence of covalently-linked polyphenols gave rise to stiffer films, with lower sorption capacity and more hydrophobic nature. The infectivity of MNV and HAV on fresh blueberries after the coating treatments was reduced by approximately 4.28 and 2.38 log, respectively, after overnight incubation, as compared to the controls, when 10% PPC was incorporated into the film. Higher amounts of PPC did not significantly improve the antiviral activity and a complete inactivation for both viruses was observed after 4 days of storage at 25 °C. This paper highlights the potential of persimmon discards as a cheap source of food-grade antiviral coatings with improved physicochemical properties as compared to commercial citrus pectin., Grant RTI-2018-094268-B-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work was also funded by the grant INNVAL10-19-009 - CA8250 from Agència Valenciana d'Innovació (AVI). D.A. Méndez. Is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government (783–2017). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. PTI-SusPlast+ is also acknowledged for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pectin-based aerogel particles for drug delivery: Effect of pectin composition on aerogel structure and release properties

  • Méndez, D. A.
  • Schroeter, B.
  • Martínez-Abad, Antonio
  • Fabra, María José
  • Gurikov, P.
  • López-Rubio, Amparo
In this work, nanostructured pectin aerogels were prepared via a sol-gel process and subsequent drying under supercritical conditions. To this end, three commercially available citrus pectins and an in-house produced and enzymatically modified watermelon rind pectin (WRP) were compared. Then, the effect of pectin's structure and composition on the aerogel properties were analysed and its potential application as a delivery system was explored by impregnating them with vanillin. Results showed that the molecular weight, degree of esterification and branching degree of the pectin samples played a main role in the production of hydrogels and subsequent aerogels. The developed aerogel particles showed high specific surface areas (468-584 m2/g) and low bulk density (0.025-0.10 g/cm3). The shrinkage effect during aerogel formation was significantly affected by the pectin concentration and structure, while vanillin loading in aerogels and its release profile was also seen to be influenced by the affinity between pectin and vanillin. Furthermore, the results highlight the interest of WRP as a carrier of active compounds which might have potential application in food and biomedical areas, among others., The projects RTI2018-094268-B-C22 and CEX2021-001189-S were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Project INNEST/2021/27 was granted by Agencia Valenciana de Innovación (AVI) and co-financed by the European Union through the Operative Programme of FEDER from Comunitat Valenciana 2014–2020., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biotintas de alginato para impresión 3D: efecto de la estructura en sus propiedades reológicas

  • Mercado, Jorge
  • Esteban-Arranz, Adrián
  • Hernández-Sosa, Alejandro
  • López-Rubio, Amparo
  • Martínez Abad, Antonio
  • Hernández, Rebeca
  • Bojorges, Hylenne
  • Fabra, María José
El alginato es un polímero de origen natural que gelifica rápidamente a temperatura ambiente en presencia de cationes divalentes, ampliamente utilizado en impresión 3D por extrusión. En este trabajo se emplearon tres alginatos con diferentes características estructurales, uno comercial y dos extraídos en el laboratorio para la preparación de biotintas de alginato. Para la preparación de las biotintas, se entrecruzaron los alginatos con diferentes concentraciones de cloruro cálcico. Los resultados obtenidos mediante pruebas de vial invertido y medidas de flujo mostraron que el alginato con relación menor M/G dio lugar a biotintas con mayores valores de viscosidad a menores concentraciones de cloruro cálcico. Este trabajo pretende demostrar la gran influencia que la estructura del alginato tiene sobre la preparación de biotintas que puedan ser utilizadas para la producción de andamios por impresión 3D., Alginate is a natural polymer with a fast gelation process at room temperature in the presence of divalent cations, which is widely used in 3D printing by extrusion. In this work, three different alginates with different structural characteristics, one commercial and two extracted in the lab from algae were used to prepare alginate bioinks. These bioinks were crosslinked with different concentrations of CaCl2. Results from the inverted vial and flow measurements allowed to conclude that alginate with the lowest M/G ratio gave rise to bioinks with higher viscosity at lower concentrations of CaCl2. This work demonstrates the influence that the alginate structure possesses for the generation of bioinks that will be used to produce scaffolds by 3D printing technique., Los autores agradecen la financiación economica del MICINN (PID2020-113045GB-C22 y RTI-2018-094268-B-C22). Adrián Esteban-Arranz agradece el contrato financiado por la Plataforma Temática Interdisciplinar del CSIC, SusPlast: Plataforma Interdisciplinar de Plásticos Sostenibles para una Economía Circular. Hylenne Bojorges agradece el contrato Santiago Grisolía de la Generalitat Valenciana (GRISOLIAP/2019/007), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysaccharide-based emulsion gels as fat replacers in Frankfurter sausages: Physicochemical, nutritional and sensorial evaluation

  • Fontes Candia, Cynthia
  • Martínez Sanz, Marta
  • Gómez-Cortés, Pilar
  • Calvo, Maria V.
  • Verdú, Samuel
  • Grau, Raúl
  • López-Rubio, Amparo
Agar and κ-carrageenan emulsion gels were used to produce Frankfurters with reduced animal fat content by partially (50%) or completely (100%) replacing the pork back fat. The results showed that 50% of the pork back fat substitution did not affect the mechanical and physicochemical properties of the obtained sausages compared with the control (pure pork back fat). Slight changes in the textural and TBARS values were observed for the 100% substituted sausages, while a reduction from 25.37 to 17.07 g/g sample of total fat was attained. Thus, decreasing the caloric content from 280 to 209 kcal/g sample. The saturated fatty acid/unsaturated fatty acid ratio was also reduced from 0.58 to 0.38 with 50% substitution and 0.17 with total substitution, thus diminishing the atherogenic and thrombogenic indexes by 35% and 70%, respectively. The reformulated Frankfurters with a reduced-fat content were accepted by the consumers, evidencing that the polysaccharide-based emulsion gels can be promising ingredients for developing meat products with improved nutritional composition., The projects RTI2018-094268-B-C22, RTI2018-094268-B-C21, CEX2021-001189-S and PID2020-114821RB-I00 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructural changes in polysaccharide-casein gel-like structures upon in vitro gastrointestinal digestion

  • Fontes Candia, Cynthia
  • Díaz-Piñero, Laura
  • Martínez, Juan Carlos
  • Gómez-Mascaraque, Laura G.
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
This work reports on the nanostructural changes taking place during the in vitro gastrointestinal digestion of polysaccharide-casein gel-like structures through the use of small angle X-ray scattering (SAXS). The results indicated that during the gastric phase, the hydrolysis of casein led to a swelling of the micellar structure, yielding peptide clusters. The presence of sulphated polysaccharides such as agar and κ-carrageenan was seen to limit the hydrolysis of casein during the gastric phase, hence decreasing the size of the formed clusters. After the intestinal phase, the produced peptidic fragments appeared to interact with the bile salts present in the digestion medium, yielding a mixture of bile salt lamellae/micelles and vesicular structures. However, in the presence of polysaccharides, which can interact with bile salts, the formation of vesicular structures was limited. Interestingly, the inclusion of casein within hybrid gel-like structures led to the formation of strong polysaccharide-protein interactions, especially in the case of κ-carrageenan. As a result, in some of the formulations, polysaccharide-peptide complexes were released towards the liquid medium, which formed larger vesicular structures. This was related to the greater protective effect of these particular gel-like structures. Furthermore, κ-carrageenan hindered the formation of bile salt lamellae/micelles. These results are of high relevance to understand the intestinal transport mechanism of the digestion products from protein-based ingredients and will allow a rational design of novel products with optimum nutritional and functional properties., This work was financially supported by the projects RTI2018-094408-J-I00 and RTI-2018-094268-B-C22, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposals 2021055177 and 2022025569). Laura Díaz-Piñero is recipient of a pre-doctoral JAE grant from CSIC (JAEINT_21 _03398_)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polysaccharide-based structured lipid carriers for the delivery of curcumin: An in vitro digestion study

  • Velderrain-Rodríguez, Gustavo
  • Fontes Candia, Cynthia
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
  • Martín-Belloso, Olga
  • Salvia Trujillo, Laura
The present work aimed at studying the in vitro digestion fate of κ-carrageenan (KC) or agar (AG) emulsion gels (EG), and KC oil-filled aerogels (OAG) in terms of their structural changes, lipolysis kinetics and curcumin bioaccessibility. On the one hand, both EG and aerogels showed large (70-200 µm) and heterogeneous particles after gastric conditions, indicating the release of bulk oil and gelled material. Nonetheless, this material release in the stomach phase was lower in the case of EG-AG and OAG-KC compared to EG-KC. After small intestinal conditions, EG and oil-filled aerogels presented a wide range of particle sizes probably due to the presence of undigested lipid material, gelled structures, as well as lipid digestion products. For the most part, adding curcumin to the structures' lipid phase did not cause of the structural modifications that occurred at the different in vitro digestion phases. On the other hand, the lipolysis kinetics was different depending on the type of structure. Amongst emulsion-gels, those formulated with κ-carrageenan presented a slower and lower lipolysis kinetics compared to those formulated with agar, which could be attributed to their higher initial hardness. Overall, the addition of curcumin in the lipid phase decreased the lipolysis in all the structures, which evidenced its interference in the lipid digestion process. The curcumin bioaccessibility reached high values (≈ 100 %) for all the studied structures, presenting a high solubility in intestinal fluids. This work unravels the implications of microstructural changes of emulsion-gels and oil-filled aerogels during digestion and their impact on their digestibility and subsequent functionality., This study was funded by the Ministry of Science, Innovation and Universities throughout the projects RTI2018–094268-B-C21 (University of Lleida) and RTI2018–094268-B-C22 (Agencia Estatal Consejo Superior de Investigaciones Cientificas (CSIC))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization and characterization of reinforced biodegradable cellulose-based aerogels via polylactic acid/polyhydroxybutyrate coating

  • Reyes, Alcira
  • Calleja, Alberto
  • Gil-Guillén, Irene
  • Benito González, Isaac
Vine shoots (VS) and waste eucalyptus paperboard (EP) have been used as cellulose sources (in the form of cellulose nanocrystals -CNCs- and cellulosic fibers respectively) for developing cellulose-based aerogels. Two different parameters including cellulose concentration (0.5 % and 2 % w/v) and freezing temperatures (-20 °C and -80 °C) were tested to evaluate differences in the porosity of the aerogels via Brunauer-Emmett-Teller (BET) and thermal conductivity analyses. In addition, a supplementary coating was applied to the raw aerogels by means of dipping the materials in either polylactic acid (PLA) or polyhydroxybutyrate (PHB) solutions (1 % w/v). Their microstructure was observed via SEM and the reinforcing capacity provided by the coating was measured by means of mechanical compressive tests (~10-fold improvement) and water resistance (contact angle >100°). Finally, aerogels' biodegradability was also confirmed according to the standard ISO 20200 thus providing a sustainable and high-performance alternative to conventional materials also following circular economy principles., Isaac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033). This project was also funded with the support of ACCIO-Generalitat de Catalunya (Startup Capital Grant). The projects RTI2018-094268-B-C22 and CEX2021-001189-S were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of polysaccharide-protein interactions on the multi-scale structure of hybrid micellar casein-xanthan gum systems

  • Aljewicz, Marek
  • Keklik, Mehtap
  • Recio, Isidra
  • Martínez Sanz, Marta
This study reports on the effect of pH and polysaccharide concentration (protein:polysaccharide ratios of 95:5, 85:15 and 75:25) on the interactions established between xanthan gum (XG) and micellar casein (MC), investigating the impact on the type of structures formed at the micro- and nanoscale. At pH ≥ 6, the micellar casein formed stable suspensions where micelles with diameters of ca. 130–150 nm showed a compact inner structure stabilised by colloidal calcium phosphate (CCP) nanoclusters, while at pH ≤ 3, a more loosely packed interconnected network structure, stabilised by protein-protein interactions, was noted. The addition of XG, even at low MC:XG ratios (95:5), resulted in increased stability of the system, preventing the formation of micelle aggregates at the microscale, and reducing the pH range at which casein precipitated close to the isoelectric point. For all the XG loadings, coacervates were formed at pH = 2–3 due to polysaccharide-protein electrostatic interactions, leading to separation into a solid gel-like phase composed of polysaccharide-protein fibrillar structures and a liquid phase rich in protein. At the nanoscale, XG was mostly coating the micelles and filling in the inner water channels when added at MC:XG ratios ≤85:15, while the higher polysaccharide content at the ratio 75:25 allowed to form an interconnected structure. Therefore, by adjusting pH and XG concentration, it is possible to improve casein stability, reduce agglomeration and manipulate the size of protein-polysaccharide complexes formed. This will be of great relevance for the development of novel food formulations with improved stability and modulated sensory and nutritional properties., This work was financially supported by the projects RTI2018-094408-J-I00 and RTI-2018-094268-B-C22, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The publication was written as a result of the author's internship in Instituto de Investigación en Ciencias de la Alimentación, co-financed by the European Union under the European Social Fund (Operational Program Knowledge Education Development), carried out in the project Development Program at the University of Warmia and Mazury in Olsztyn (POWR.03.05. 00-00-Z310/17)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emulsification capacity of pectin extracts from persimmon waste: Effect of structural characteristics and pectin-polyphenol interactions

  • Molet Rodríguez, Anna
  • Méndez, Daniel A.
  • López-Rubio, Amparo
  • Fabra, María José
  • Martínez Sanz, Marta
  • Salvia Trujillo, Laura
  • Martín-Belloso, Olga
Polyphenol-rich pectin extracts obtained from persimmon waste might have great potential due to their emulsification capacity. Their emulsion stabilizing properties may be influenced by pectin molecular structure and pectin-polyphenol interactions which in turn can be determined by the extraction conditions. Hence, this work aimed to study the influence of the molecular structure characteristics and their respective pectin-polyphenol interactions of three polyphenol-rich persimmon pectin extracts obtained by three different extraction conditions. Low, medium and high severity extraction conditions resulted in covalent phenolics-extract (CP-E), non-covalent phenolics-extract (NCP-E) and free phenolics-extract (FP-E), respectively. The electrical charge of pectin was strongly dependent on the pH, becoming more negative at increasing pH due to carboxyl group dissociation. CP-E and NCP-E in solution had more expanded conformations than FP-E, with greater intermolecular distances and hydrodynamic diameters ranging from 1089 to 1791 nm for CP-E and NCP-E, whereas from 529 to 782 nm for FP-E. Their interfacial layer thickness was thicker at pH 3 than at pH 7, probably due to multilayer organization as a result of less repulsion between pectin chains. All pectin extracts were able to decrease the interfacial tension of an oil droplet from 35 to at least 25 mN/m, with FP-E at pH 3 being the most efficient (13.89 ± 1.07 mN/m). Even so, submicron O/W emulsions with negative ζ-potential values could be formed with all pectin extracts. However, CP-E rendered O/W emulsions with higher colloidal stability than FP-E or NCP-E, which showed aggregation and creaming. These findings provide novel insights to re-valorize pectin from persimmon waste., This study was funded by the Ministry of Economy, Industry and Competitiveness (MINECO/FEDER, UE) throughout projects RTI2018-094268-B-C2 and PID2022-137838OB-I00. Project INNEST/2021/27 was granted by Agencia Valenciana de Innovación (AVI) and co-financed by the European Union through the Operative Programme of FEDER from Comunitat Valenciana 2014–2020. The Accreditation of IATA-CSIC as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the extraction conditions on the carbohydrate and phenolic composition of functional pectin from persimmon waste streams

  • Méndez, D. A.
  • Fabra, M. J.
  • Odriozola Serrano, Isabel
  • Martín Belloso, Olga
  • Salvia Trujillo, Laura
  • López-Rubio, Amparo
  • Martinez Abad, A.
Persimmon fruit (Diospyros kaki Thunb.) production suffers great losses (15–20%) due to the inefficient overripening process. In order to valorise this waste, a compositional characterization of different fruit stages of the residues was done, and immature fruit was selected due to its high pectin and very high polyphenol content. A 3-level full factorial design was carried out to study the effect of temperature (70–95 °C) and low pH (0.5–1.5), on yield, degree of esterification, carbohydrate constituents, phenolic content and antioxidant capacity of the extracted pectin, and a complete polyphenol profile (UPLC-MS/MS) was performed on selected extracts. All responses could be accurately adjusted to the models (R2 > 80; lack of fit). Pectin yield, phenolic compounds and antioxidant activity ranged from 1.4 to 4.5%, 53.3 ± 2.27 to 111.7 ± 9.74 mg GAE/g pectin and 0.29 ± 0.01 to 2.77 ± 0.04 TEAC (Trolox μmol/mg pectin), respectively. A strong pectin-polyphenol interaction was found, which significantly enhanced acid resistance of both the pectin and polyphenol constituents, with optimum yield and polyphenol content at pH 1 and 95 °C. These new pectin-based ingredients might have a great potential as functional foods or natural food ingredients enhancing the quality and shelf-life., This work was funded by grant RTI-2018-094268-B-C21 and RTI2018-094268-B-C22 (MCIU, AEI; FEDER, UE) . Mendez D. A. is supported by the Ministry of Science Technology and Innovation of the Colombian Government (783-2017) . A. Martinez-Abad is recipient of JdC (IJDC-2017-31255) contract from the Spanish Ministry of Economy, Industry and Competitiveness.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Emulsion gels and oil-filled aerogels as curcumin carriers: Nanostructural characterization of gastrointestinal digestion products

  • Fontes-Candia, Cynthia
  • Martínez, Juan Carlos
  • López-Rubio, Amparo
  • Salvia Trujillo, Laura
  • Martín Belloso, Olga
  • Martínez-Sanz, Marta
Agar and κ-carrageenan emulsion gels and oil-filled aerogels were investigated as curcumin carriers and their structure and mechanical properties, as well as their structural changes upon in vitro gastrointestinal digestion were characterized. Agar emulsion gels presented stiffer behaviour, with smaller and more homogeneous oil droplets (ϕ ∼ 12 µm) than those from κ-carrageenan (ϕ ∼ 243 µm). The structure of κ-carrageenan gels was characterized by the presence of rigid swollen linear chains, while agar produced more branched networks. After simulated gastrointestinal digestion bile salt lamellae/micelles (∼5 nm) and larger vesicles of partially digested oil (Rg ∼ 20–50 nm) were the predominant structures, being their proportion dependent of the polysaccharide type and the physical state of the gel network. The presence of curcumin induced the formation of larger vesicles and limited the formation of mixed lamellae/micelles., The projects RTI2018-094268-B-C22 and RTI-2018-094268-B-C21 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron (2019103981 project).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bioactive extracts from persimmon waste: influence of extraction conditions and ripeness

  • Méndez, Daniel Alexander
  • Fabra, María José
  • Falcó, Irene
  • Sánchez, Gloria
  • Aranaz, Paula
  • Vettorazzi, Ariane
  • Ribas-Agustí, Albert
  • González-Navarro, Carlos Javier
  • Castellari, Massimo
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
In this work, a bioactive persimmon extract was produced from discarded fruits. A central composite design was used to evaluate the effect of different extraction parameters and ripeness stages of persimmon fruits on the total phenolic content and antioxidant activity of the resulting extracts. Significantly greater phenolic contents were obtained from immature persimmon (IP) fruits. The optimum IP extract with the conditions set by the experimental design was industrially up-scaled and its composition and functional properties were evaluated and compared with those obtained under lab-scale conditions. Both extracts contained significant protein (>20%) and phenolic contents (∼11–27 mg GA/g dry extract) and displayed significant antiviral activity against murine norovirus and hepatitis A virus. Moreover, the extract showed no toxicity and significantly reduced the fat content and the cellular ageing of Caenorhabditis elegans (C. elegans) without affecting the worm development. These effects were mediated by down-regulation of fat-7, suggesting an anti-lipogenic activity of this extract., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polysaccharide-based structured lipid carriers for the delivery of curcumin: An in vitro digestion study

  • Velderrain Rodríguez, Gustavo R.
  • Fontes-Candia, Cynthia
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
  • Martín Belloso, Olga
  • Salvia Trujillo, Laura
The present work aimed at studying the in vitro digestion fate of κ-carrageenan (KC) or agar (AG) emulsion gels (EG), and KC oil-filled aerogels (OAG) in terms of their structural changes, lipolysis kinetics and curcumin bioaccessibility. On the one hand, both EG and aerogels showed large (70–200 µm) and heterogeneous particles after gastric conditions, indicating the release of bulk oil and gelled material. Nonetheless, this material release in the stomach phase was lower in the case of EG-AG and OAG-KC compared to EG-KC. After small intestinal conditions, EG and oil-filled aerogels presented a wide range of particle sizes probably due to the presence of undigested lipid material, gelled structures, as well as lipid digestion products. For the most part, adding curcumin to the structures’ lipid phase did not cause of the structural modifications that occurred at the different in vitro digestion phases. On the other hand, the lipolysis kinetics was different depending on the type of structure. Amongst emulsion-gels, those formulated with κ-carrageenan presented a slower and lower lipolysis kinetics compared to those formulated with agar, which could be attributed to their higher initial hardness. Overall, the addition of curcumin in the lipid phase decreased the lipolysis in all the structures, which evidenced its interference in the lipid digestion process. The curcumin bioaccessibility reached high values (≈ 100 %) for all the studied structures, presenting a high solubility in intestinal fluids. This work unravels the implications of microstructural changes of emulsion-gels and oil-filled aerogels during digestion and their impact on their digestibility and subsequent functionality., This study was funded by the Ministry of Science, Innovation and Universities throughout the projects RTI2018–094268-B-C21 (University of Lleida) and RTI2018–094268-B-C22 (Agencia Estatal Consejo Superior de Investigaciones Cientificas (CSIC)). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680)