Pasar al contenido principal

DESARROLLO DE UN NUEVO PROCESO DE EXTRACCION EN CASCADA PARA LA VALORIZACION INTEGRAL DE ALGAS EN INGREDIENTES FUNCIONALES PARA APLICACIONES ALIMENTARIAS

PID2020-117744RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges-Gutierrez, Hylenne
  • Martínez-Abad, Antonio
  • Marta Martínez-Sanz
  • Vilaplana Domingo, Francisco Javier
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe , by the European Union or by the European Union NextGenerationEU/PRTR . H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring alternative red seaweed species for the production of agar-based hydrogels for food applications

  • Cebrián-Lloret, Vera
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
[EN] Three different red seaweed species, Gelidium corneum and two Gracilaria species (Agarophyton chilensis, and Gracilariopsis longissima), were used to produce agar-based fractions through conventional and simplified extraction methods and their composition and gel-forming properties were evaluated. The use of an alkaline pre-treatment was effective in removing impurities such as proteins, lipids, and ash, while the agarose/agaropectin ratio in agar was not affected. This led to the formation of hydrogels with higher stiffness and strength. Surprisingly, the presence of semi-crystalline agaropectin in the agar fractions from the two Gracilaria species, especially G. longissima, promoted the formation of more densely packed and stronger hydrogel networks, with higher gelling temperatures and superior mechanical properties. Thus, these results suggest that G. longissima has the potential to be used as an alternative to the more widespread use of G. corneum for the production of agar hydrogels for food applications., This work was financially supported by Hispanagar. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The authors also acknowledge funding from the Spanish ministry of Science and Innovation through project PID 2020-117744RJ-I00 and grant CEX2021-001189-S as well as the European Commission through project CIRCALGAE (Horizon Europe) under grant agreement 101060607
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of the invasive macroalgae Rugulopteryx Okamurae for potential biomass valorisation

  • Cebrián-Lloret, Vera
  • Cartan-Moya, Sara
  • Martínez-Sanz, Marta
  • Gómez-Cortés, Pilar
  • Calvo, María Visitación
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
[EN] This study aimed to examine the composition and properties of the invasive macroalgae R. okamurae and explore potential applications. The results showed that the seaweed biomass is mainly composed of structural carbohydrates, with alginate being the main constituent, accounting for 32 % of its total composition and with a mannuronic and guluronic acid ratio (M/G) ratio of 0.93. It also has a relatively high concentration of fucose, related to the presence of fucoidans that have important biological functions. Among the mineral contents, a high magnesium and calcium (7107 and 5504 mg/kg) concentration, and the presence of heavy metals above legislated thresholds, were notable. R. okamurae also contained a high lipid content of 17 %, mainly composed of saturated fatty acids, but with a significant fraction of n3 polyunsaturated fatty acids (18 %) resulting in a low n6/n3 ratio (0.31), that has health benefits. The protein content of R. okamurae was 12 %, with high-quality proteins, as essential amino acids (mainly leucine, phenylalanine and valine) constitute 32 % of the total amino acids. It also showed a high polyphenol content and outstanding antioxidant properties (106.88 mg TE/g). Based on these findings, R. okamurae has significant potential as a sustainable source of bioactive compounds that can add value to different sectors, including food, feed, pharmaceuticals and cosmetics., This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain) . The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PDI2020-114821RB-I00, PID2020-117744RJ-I00, as well as TED2021-129711B-I00 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through the European project CIRCALGAE under grant agreement 101060607. In all projects, funding from "ERDF A way of making Europe" or the "NextGenerationEU/PRTR" is also acknowledged, as appropriate.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of alginate purity and M/G ratio by methanolysis coupled with anion exchange chromatography

  • Bojorges-Gutierrez, Hylenne
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
  • Martínez-Abad, Antonio
[EN] Alginates are industrially relevant polysaccharides widely used in the food and biomedical industries for their excellent gelling properties. The growing emphasis on the valorization of marine resources has evidenced the need for alternative methods for the determination of both alginate content and the M/G ratio. This study describes the application of acid methanolysis and separation by anion exchange chromatography. Five samples, including alginates extracted from Saccharina latissima, Ascophyllum nodosum, a certified standard, and two polyuronates (Poly-M and Poly-G), were analysed for their M/G ratio and alginate content at different treatment conditions, and compared with other conventionally used or reference methods (NMR, FTIR, and colorimetric methods). Quantitative estimation of alginate was relatively accurate at optimum conditions (4 h at 100 ¿C), as compared with the certified standard or with other colorimetric methods. M/G ratios were not significantly different from those determined after the reference method ( 1 H NMR) or compared to FTIR protocols. The results evidence that methanolysis may be applied to simultaneously estimate the purity and M/G ratio of alginate-rich samples in a single analysis., The authors acknowledge funds from the project PID2020-117744RJ-I00, grant CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, Maria José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
[EN] The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respec-tively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, tex-turizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges fi-nancial support from the Generalitat Valenciana for the award of a Santiago Grisol?a grant (GRISOLIAP/2019/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Valorization of Marine Biomass for the Development of Biopolymeric Materials and Additives with Functional Properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina para desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba R. okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un gran potencial como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. El grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad en el tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza más altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas o polifenoles. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, podrían ser de interés para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de A. esculenta y S. latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que A. nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CA] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina para desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava R. okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un gran potencial com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre el comportament cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més, també es van estudiar les algues roges com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de forma més eficient mitjançant mètodes simplificats, i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. El grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. Per contra, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat en el temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa més altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes o polifenols. Encara que això va donar lloc a hidrogels menys rígids i resistents, podrien ser d'interés per a la producció d'hidrogels amb propietats bioactius. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de A. esculenta i S. latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que A. nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi , les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., [EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biorefinery of the relevant brown algae Saccharina latissima and Ascophylum nodosum towards novel, sustainable and functional ingredients

  • Bojorges Gutiérrez, Hylenne
[ES] Esta tesis doctoral pretende aportar conocimientos fundamentales y prácticos sobre la valorización de las algas pardas. Se ha tratado de comprender la relación entre la estructura y funcionalidad de sus polisacáridos y proteínas, considerando sus propiedades funcionales, tecnológicas y bioactivas. Todo ello se ha abordado desde una perspectiva de biorrefinería, enfocada a la economía circular y la sostenibilidad. En primer lugar, se ha llevado a cabo una optimización para la extracción de compuestos valiosos a partir de algas pardas utilizando diversas tecnologías innovadoras. Se investigó un pretratamiento a alta presión de algas pardas (A. nodosum y S. latissima) para extraer alginato y se comparó con el método de extracción convencional. El objetivo era comprender cómo las diferencias iniciales en la composición y estructura de la pared celular de las algas afectaban a la extracción de este polisacárido y a sus propiedades tecnológicas, así como, su capacidad como emulsionante y gelificante. Asimismo, se examinó la extracción de conjugados proteína-polisacárido mediante la aplicación secuencial de varios métodos de extracción, así como sus propiedades funcionales (capacidad de retención de agua y aceite, emulsionante) y bioactivas (actividad antioxidante y capacidad antihipertensiva). En estos estudios se observaron diferencias en la arquitectura de la pared celular de las algas, pertenecientes a distintos órdenes, como Fucales y Laminariales, que influyeron directamente en los compuestos extraídos y en sus propiedades estructurales y tecnológicas. Sin embargo, a pesar de estas diferencias, los resultados mostraron el potencial de los compuestos extraídos como ingredientes en la industria alimentaria y farmacéutica. La segunda sección de esta tesis exploró la valorización de los subproductos generados durante la extracción del alginato. Se realizó un estudio exhaustivo de todas las fracciones y subproductos producidos en este proceso con el objetivo de identificar las fracciones más prometedoras para su valorización. Los resultados mostraron que los residuos sólidos tenían el potencial más significativo debido a su composición fisicoquímica. Por lo tanto, se sugirieron posibles estrategias para valorizar estos residuos, destacando su alto potencial como ingredientes bioactivos, texturizantes o de valor añadido nutricional para aplicaciones alimentarias, de piensos, cosméticos y farmacéuticos. Además, a partir de este trabajo, se investigó la extracción secuencial y combinada por diferentes métodos para recuperar la mayor cantidad posible de proteína intracelular de estos residuos sólidos. Se comprobó que la fracción proteica de los extractos contenía un alto porcentaje de aminoácidos esenciales, adecuadas propiedades funcionales y una interesante actividad antihipertensiva. Finalmente, la tercera parte de esta tesis se centró en la generación de conocimiento a través de la elucidación estructural del alginato. Para ello, se desarrolló un método rápido para determinar la relación M/G del alginato, que mostró valores cercanos al método de referencia (1H NMR), demostrando su precisión. En conjunto, esta tesis doctoral representa un avance significativo en la generación de conocimiento y valorización de la biomasa algal y sus residuos en compuestos de alto valor. Además, estos enfoques son potencialmente aplicables a otras biomasas algales., [CA] Esta tesi doctoral pretén aportar coneixements fonamentals i pràctics sobre la valorització de les algues marrons. S'ha tractat de comprendre la relació entre l'estructura i funcionalitat dels seus polisacàrids i proteïnes, considerant les seues propietats funcionals, tecnològiques i bioactivas. Tot això s'ha abordat des d'una perspectiva de biorrefinería, enfocada a l'economia circular i la sostenibilitat. En primer lloc, s'ha dut a terme una optimització per a l'extracció de compostos valuosos a partir d'algues marrons utilitzant diverses tecnologies innovadores. Es va investigar un pretractament a alta pressió d'algues marrons (A. nodosum i S. latissima) per a extraure alginat i es va comparar amb el mètode d'extracció convencional. L'objectiu era comprendre com les diferències inicials en la composició i estructura de la paret cel·lular de les algues afectaven l'extracció d'este polisacàrid i a les seues propietats tecnològiques, així com, la seua capacitat com a emulsionant i gelificant. Així mateix, es va examinar l'extracció de conjugats proteïna-polisacàrid mitjançant l'aplicació seqüencial de diversos mètodes d'extracció, així com les seues propietats funcionals (capacitat de retenció d'aigua i oli, emulsionant) i bioactivas (activitat antioxidant i capacitat antihipertensiva). En estos estudis es van observar diferències en l'arquitectura de la paret cel·lular de les algues, pertanyents a diferents ordes, com Fucales i Laminariales, que van influir directament en els compostos extrets i en les seues propietats estructurals i tecnològiques. No obstant això, malgrat estes diferències, els resultats van mostrar el potencial dels compostos extrets com a ingredients en la indústria alimentària i farmacèutica. La segona secció d'esta tesi va explorar la valorització dels subproductes generats durant l'extracció de l'alginat. Es va realitzar un estudi exhaustiu de totes les fraccions i subproductes produïts en este procés amb l'objectiu d'identificar les fraccions més prometedores per a la seua valorització. Els resultats van mostrar que els residus sòlids tenien el potencial més significatiu a causa de la seua composició fisicoquímica. Per tant, es van suggerir possibles estratègies per a valorar estos residus, destacant el seu alt potencial com a ingredients *bioactivos, texturitzants o de valor afegit nutricional per a aplicacions alimentàries, de pinsos, cosmètics i farmacèutics. A més, a partir d'este treball, es va investigar l'extracció seqüencial i combinada per diferents mètodes per a recuperar la major quantitat possible de proteïna intracel·lular d'estos residus sòlids. Es va comprovar que la fracció proteica dels extractes contenia un alt percentatge d'aminoàcids essencials, adequades propietats funcionals i una interessant activitat antihipertensiva. Finalment, la tercera part d'esta tesi es va centrar en la generació de coneixement a través de l'elucidació estructural de l'alginat. Per a això, es va desenvolupar un mètode ràpid per a determinar la relació M/G de l'alginat, que va mostrar valors pròxims al mètode de referència (1H NMR), demostrant la seua precisió. En conjunt, esta tesi doctoral representa un avanç significatiu en la generació de coneixement i valorització de la biomassa algal i els seus residus en compostos d'alt valor. A més, estos enfocaments són potencialment aplicables a altres biomasses algals., [EN] This doctoral thesis aims to provide fundamental and practical knowledge on the valorization of brown seaweeds. It has sought to understand the relationship between the structure and functionality of their polysaccharides and proteins, considering their functional, technological and bioactive properties. All this has been approached from a biorefinery perspective, focused on circular economy and sustainability. First, an optimization for extracting valuable compounds from brown seaweeds was carried out using various innovative technologies. A high-pressure pre-treatment of brown seaweeds (Ascophyllum nodosum and Saccharina latissima) to extract alginate was investigated and compared with the conventional extraction method. The purpose was to understand how initial differences in algal cell wall composition and structure affected the extraction of this polysaccharide and its technological properties, such as its ability as emulsifier and gelling agent. Likewise, the extraction of protein-polysaccharide conjugates was examined by sequential application of several extraction methods, as well as their functional properties (water, oil retention activity and emulsifying capacity) and bioactive properties (antioxidant activity and antihypertensive capacity). In these studies, differences were observed in the cell wall architecture of the algae, belonging to different orders, such as Fucales and Laminariales, which directly influenced the extracted compounds and their structural and technological properties. However, despite these differences, the results showed the potential of the extracted compounds as ingredients in the food and pharmaceutical industries. The second section of this thesis explored the valorization of by-products generated during alginate extraction. An exhaustive study of all the fractions and by-products produced in this process was carried out to identify the most promising fractions for valorization. The results showed that solid wastes had the most significant potential due to their physicochemical composition. Therefore, possible strategies to valorize these wastes were suggested, highlighting their high potential as bioactive, texturizing, or nutritional value-added ingredients for food, feed, cosmetic, and pharmaceutical applications. Besides, from this work, sequential and combined extraction by different methods was investigated to recover as much intracellular protein as possible from these solid wastes. It was found that the protein fraction of the extracts contained a high percentage of essential amino acids, adequate functional properties, and an interesting antihypertensive activity. Finally, the third part of this thesis focused on generating knowledge through the structural elucidation of alginate. For this purpose, a rapid method was developed to determine the M/G ratio of alginate, which showed values close to the reference method (1H NMR), demonstrating its accuracy. Overall, this PhD thesis represents a significant advance in generating knowledge and valorizing algal biomass and its residues into high-value compounds. Furthermore, these approaches are potentially applicable to other algal biomasses., The authors wish to acknowledge funds from the grants PID2022- 138328OB-C21 and CEX2021-001189-S funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007). The authors acknowledge funds from the project PID2020-117744RJ-I00 and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. Additionally, the Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged. H. Bojorges expresses gratitude for the financial assistance provided by the Generalitat Valenciana in the form of a Santiago Grisolía grant (GRISOLIAP/2019/007)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alginate industrial waste streams as a promising source of value-added compounds valorization

  • Bojorges, Hylenne
  • Fabra, María José
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
The alginate industry processes more than hundred thousand tons per year of algae in Europe, discarding around 80% of the algae biomass as different solid/liquid residual streams. In this work, Saccharina latissima and Ascophyllum nodosum, their generated alginates and all residual fractions generated in the process were characterized in terms of lipid, ash, protein content, and the carbohydrate composition and antioxidant capacities analyzed. The first fraction after acid treatment (ca. 50% of the initial dry biomass) was rich in phlorotannins (15 mg GAE/g) and bioactive fucoidans (15-70%), with a high sulfation degree in A. nodosum. Two fractions generated from the solid residue, one soluble and another insoluble (Ra and Rb, respectively), constituted 9% and 5-8% of the initial biomass and showed great potential as a source of soluble protein (30% for S. latissima), and cellulose (70%) or fucoidan, respectively. Valorization strategies are suggested for these waste streams, evidencing their high potential as bioactive, texturizing or nutritional added-value ingredients for cosmetic, food, feed or pharmaceutical applications., This work acknowledges financial support from the Spanish Research agency (Ministry of Science and Innovation) through projects RTI-2018-094268-B-C22 and PID2020-117744RJ-I00. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and functional properties of alginate obtained by means of high hydrostatic pressure-assisted extraction

  • Bojorges, Hylenne
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
  • Rodrigo Aliaga, Dolores
  • Vilaplana, Francisco
  • López-Rubio, Amparo
  • Fabra, María José
The effects of the high hydrostatic pressure (HPP) pre-treatment on the alginate extraction were seen to greatly depend on the recalcitrant nature of two algae species. Alginates were deeply characterized in terms of composition, structure (HPAEC-PAD, FTIR, NMR, SEC-MALS), functional and technological properties. The pre-treatment significantly increased the alginate yield in the less recalcitrant A. nodosum (AHP) also favoring the extraction of sulphated fucoidan/fucan structures and polyphenols. Although the molecular weight was significantly lower in AHP samples, neither the M/G ratio nor the M and G sequences were modified. In contrast, a lower increase in alginate extraction yield was observed for the more recalcitrant S. latissima after the HPP pre-treatment (SHP), but it significantly affected the M/G values of the resulting extract. The gelling properties of the alginate extracts were also explored by external gelation in CaCl2 solutions. The mechanical strength and nanostructure of the hydrogel beads prepared were determined using compression tests, synchrotron small angle X-ray scattering (SAXS), and cryo-scanning electron microscopy (Cryo-SEM). Interestingly, the application of HPP significantly improved the gel strength of SHP, in agreement with the lower M/G values and the stiffer rod-like conformation obtained for these samples., Grants RTI-2018-094268-B-C22 and PID2020-117744RJ-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring alternative red seaweed species for the production of agar-based hydrogels for food applications

  • Cebrián Lloret, Vera
  • Martínez Abad, Antonio
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Three different red seaweed species, Gelidium corneum and two Gracilaria species (Agarophyton chilensis, and Gracilariopsis longissima), were used to produce agar-based fractions through conventional and simplified extraction methods and their composition and gel-forming properties were evaluated. The use of an alkaline pre-treatment was effective in removing impurities such as proteins, lipids, and ash, while the agarose/agaropectin ratio in agar was not affected. This led to the formation of hydrogels with higher stiffness and strength. Surprisingly, the presence of semi-crystalline agaropectin in the agar fractions from the two Gracilaria species, especially G. longissima, promoted the formation of more densely packed and stronger hydrogel networks, with higher gelling temperatures and superior mechanical properties. Thus, these results suggest that G. longissima has the potential to be used as an alternative to the more widespread use of G. corneum for the production of agar hydrogels for food applications., This work was financially supported by Hispanagar. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The authors also acknowledge funding from the Spanish ministry of Science and Innovation through project PID 2020-117744RJ-I00 and grant CEX 2021-001189-S as well as the European Commission through project CIRCALGAE (Horizon Europe) under grant agreement 101060607., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Overview of alginate extraction processes: Impact on alginate molecular structure and techno-functional properties

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
Background: Brown algae are a valuable source of various biopolymers, with alginate standing out as a phycocolloid of great industrial importance. Although the extraction process is well established on an industrial scale, several innovative and environmentally friendly extraction technologies have been explored to improve the efficiency of the process both in terms of yields and energy and solvent consumption. Scope and approach: The review aims to describe and analyze different strategies used to extract alginate from brown algae, including different pre-treatment methods used before extraction. In addition, the impact of these extraction technologies, with or without pre-treatments, on alginate's structural and techno-functional properties is also discussed. Key findings: The extraction process parameters play a key role and significantly influence the quality of alginate and the extraction yield. Innovative technologies have the potential to enhance extraction capacity, improve process efficiency, and promote environmental friendliness. Research efforts are focused on achieving sustainable alginate production and co-production of other value-added products. This review provides useful information to the alginate industry towards a more sustainable approach and foster the diversification of high-value products., The authors wish to acknowledge funds from the project PID2020-117744RJ-I00 and grant CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of the invasive macroalgae Rugulopteryx Okamurae for potential biomass valorisation

  • Cebrián Lloret, Vera
  • Cartan Moya, Sara
  • Martínez Sanz, Marta
  • Gómez-Cortés, Pilar
  • Calvo, Maria V.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
This study aimed to examine the composition and properties of the invasive macroalgae R. okamurae and explore potential applications. The results showed that the seaweed biomass is mainly composed of structural carbohydrates, with alginate being the main constituent, accounting for 32 % of its total composition and with a mannuronic and guluronic acid ratio (M/G) ratio of 0.93. It also has a relatively high concentration of fucose, related to the presence of fucoidans that have important biological functions. Among the mineral contents, a high magnesium and calcium (7107 and 5504 mg/kg) concentration, and the presence of heavy metals above legislated thresholds, were notable. R. okamurae also contained a high lipid content of 17 %, mainly composed of saturated fatty acids, but with a significant fraction of n3 polyunsaturated fatty acids (18 %) resulting in a low n6/n3 ratio (0.31), that has health benefits. The protein content of R. okamurae was 12 %, with high-quality proteins, as essential amino acids (mainly leucine, phenylalanine and valine) constitute 32 % of the total amino acids. It also showed a high polyphenol content and outstanding antioxidant properties (106.88 mg TE/g). Based on these findings, R. okamurae has significant potential as a sustainable source of bioactive compounds that can add value to different sectors, including food, feed, pharmaceuticals and cosmetics., This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PDI2020-114821RB-I00, PID2020-117744RJ-I00, as well as TED2021-129711B-I00 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through the European project CIRCALGAE under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe” or the “NextGenerationEU/PRTR” is also acknowledged, as appropriate., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX 2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Valorization of marine biomass for the development of biopolymeric materials and additives with functional properties, Valorización de biomasa marina para el desarrollo de materiales biopoliméricos y aditivos con propiedades funcionales

  • Cebrián Lloret, Vera
[EN] This doctoral thesis focused on the valorization of different sources of marine biomass with the main purpose of developing biopolymeric materials and ingredients for the food industry. Thus, in the first part of the thesis, the valorization of biomass from different algae species was carried out to identify compounds of interest and assess their potential to produce biopolymeric materials and protein-rich food ingredients. Among these species was Ruguloperyx okamurae, an invasive brown seaweed that poses a threat to marine ecosystems. However, this species was shown to have significant potential as a sustainable source of bioactive compounds, transforming its role as a threat into a valuable opportunity. Red seaweed biomass was also highlighted for its potential in a variety of applications, including the development of cost-effective and environmentally friendly materials for food applications obtained through minimal processing. In this context, the composition and structure of the algal cell walls played a crucial role in understanding how each species behaves during processing and in the properties of the resulting films. In addition to the production of biopolymeric materials, red seaweeds were also studied as a source of proteins for human consumption. Although native seaweeds had low digestibility, this was improved through processing. However, it is important to note that, despite the improvement in digestibility, processing could induce the degradation of more labile amino acids, having a negative impact on the nutritional quality of the proteins. In the second part of this thesis, several species of red seaweeds were explored to extract agar more efficiently by simplified methods, and the suitability of the extracts obtained to develop biopolymeric materials and hydrogels for food applications was evaluated. It could be observed that the degree of agar purification had a significant impact on the final properties of both films and hydrogels. In the case of films, those made of pure agar exhibited superior properties; however, they underwent significant changes in their semicrystalline structure during storage. In contrast, those films derived from less purified agar extracts showed greater stability over time, suggesting the potential of less purified agars as additives to reduce costs and improve the stability of pure agar films. Regarding the hydrogels, agar purification led to the formation of hydrogels with significantly higher strength and hardness. On the other hand, the simplified extraction protocol produced less purified agar fractions containing other compounds such as proteins, polyphenols, and minerals. Although this resulted in less rigid and resistant hydrogels, this feature could be advantageous for the production of hydrogels with bioactive properties. In the third and last part of the thesis, the valorization of industrial wastes generated after alginate extraction was addressed, with the purpose of obtaining cellulosic fractions by simplified methods for their application in the production of biopolymeric materials. In this context, it was observed that the residues of Alaria esculenta and Saccharina latissima were suitable for the extraction of cellulosic fractions, while Ascophyllum nodosum might be more interesting for the production of fucoidan-rich extracts. Cellulosic fractions with higher purity produced films with more desirable mechanical properties and visual appearance. Conversely, less purified fractions presented a greater barrier to water vapor. According to the results, it was determined that the simple application of an alkaline treatment could produce cellulosic fractions that resulted in films with an optimal balance between functional properties and economic and environmental efficiency in biopolymeric material production., [ES] Esta tesis doctoral se centró en la valorización de diferentes fuentes de biomasa marina con el propósito principal de desarrollar materiales biopoliméricos e ingredientes destinados a la industria alimentaria. Así pues, en la primera parte de la tesis, se llevó a cabo la valorización de la biomasa de diversas especies de algas con el objetivo de identificar compuestos de interés y evaluar su potencial para la producción de materiales biopoliméricos e ingredientes alimentarios ricos en proteínas. Entre estas especies se encontraba Ruguloperyx okamurae, un alga parda invasora que representa una amenaza para los ecosistemas marinos. No obstante, se demostró que esta especie posee un potencial significativo como fuente sostenible de compuestos bioactivos, transformando su papel de amenaza en una valiosa oportunidad. La biomasa de las algas rojas también destacó por su potencial en diversas aplicaciones, incluyendo el desarrollo de materiales rentables y respetuosos con el medio ambiente para aplicaciones alimentarias obtenidos mediante de un procesado mínimo. En este contexto, la composición y la estructura de las paredes celulares de las algas desempeñaron un papel fundamental para entender cómo se comporta cada especie durante el procesado y en las propiedades de las películas resultantes. Además de la producción de materiales biopoliméricos, también se estudiaron las algas rojas como fuente de proteínas para el consumo humano. Aunque las algas nativas presentaron una baja digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, esta mejoró mediante su procesado. No obstante, es importante destacar que, a pesar de esta mejora en la digestibilidad, el procesado podía inducir la degradación de los aminoácidos más lábiles, lo que repercutía negativamente en la calidad nutricional de las proteínas. En la segunda parte de esta tesis, se exploraron varias especies de algas rojas para extraer agar de forma más eficiente mediante métodos simplificados, y se evaluó la idoneidad de los extractos obtenidos para desarrollar materiales biopoliméricos e hidrogeles para aplicaciones alimentarias. Se pudo observar que el grado de purificación del agar tuvo un impacto significativo en las propiedades finales tanto de las películas como de los hidrogeles. En el caso de las películas, las fabricadas con agar puro presentaron propiedades superiores; sin embargo, sufrieron cambios significativos en su estructura semicristalina durante el almacenamiento. Por el contrario, las películas derivadas de extractos de agar menos purificados mostraron una mayor estabilidad a lo largo del tiempo, sugiriendo su potencial como aditivo para reducir costes y mejorar la estabilidad de las películas de agar puro. En el caso de los hidrogeles, la purificación del agar condujo a la formación de hidrogeles con una resistencia y dureza significativamente altas. Por otro lado, el protocolo de extracción simplificado produjo fracciones de agar menos purificadas que contenían compuestos adicionales como proteínas, polifenoles y minerales. Aunque esto dio lugar a hidrogeles menos rígidos y resistentes, esta característica podría ser beneficiosa para la producción de hidrogeles con propiedades bioactivas. En la tercera y última parte de la tesis, se abordó la valorización de los residuos industriales generados tras la extracción de alginato, con el propósito de obtener fracciones de celulosa mediante métodos simplificados para su aplicación en la producción de materiales biopoliméricos. En este contexto, se observó que los residuos de Alaria esculenta y Saccharina latissima resultaron adecuados para la extracción de fracciones celulósicas, mientras que Ascophyllum nodosum podría ser más interesante para la producción de extractos ricos en fucoidano. Las fracciones de celulosa con mayor pureza generaron películas con propiedades mecánicas y aspecto visual más deseables. En cambio, las fracciones menos purificadas presentaron una mayor barrera al vapor de agua. De acuerdo con los resultados, se determinó que la simple aplicación de un tratamiento alcalino puede producir fracciones de celulosa que dan lugar a películas con un equilibrio óptimo entre propiedades funcionales y eficiencia económica y medioambiental., [CAT] Aquesta tesi doctoral es va centrar en la valorització de diferents fonts de biomassa marina amb el propòsit principal de desenvolupar materials biopolimèrics i ingredients destinats a la indústria alimentària. Així doncs, en la primera part de la tesi, es va dur a terme la valorització de la biomassa de diverses espècies d'algues amb l'objectiu d'identificar compostos d'interés i avaluar el seu potencial per a la producció de materials biopolimèrics i ingredients alimentaris rics en proteïnes. Entre aquestes espècies es trobava Ruguloperyx okamurae, una alga marró invasora que representa una amenaça per als ecosistemes marins. No obstant això, es va demostrar que aquesta espècie posseeix un potencial significatiu com a font sostenible de compostos bioactius, transformant el seu paper d'amenaça en una valuosa oportunitat. La biomassa de les algues roges també va destacar pel seu potencial en diverses aplicacions, incloent-hi el desenvolupament de materials rendibles i respectuosos amb el medi ambient per a aplicacions alimentàries obtinguts mitjançant d'un processament mínim. En aquest context, la composició i l'estructura de les parets cel·lulars de les algues van exercir un paper fonamental per a entendre com es comporta cada espècie durant el processament i en les propietats de les pel·lícules resultants. A més de la producció de materials biopolimèrics, les algues roges també es van estudiar com a font de proteïnes per al consum humà. Encara que les algues natives van presentar una baixa digestibilitat, aquesta va millorar mitjançant el seu processament. No obstant això, és important destacar que, malgrat aquesta millora en la digestibilitat, el processament podia induir la degradació dels aminoàcids més làbils, la qual cosa repercutia negativament en la qualitat nutricional de les proteïnes. En la segona part d'aquesta tesi, es van explorar diverses espècies d'algues roges per a extraure agar de manera eficient mitjançant mètodes simplificats i es va avaluar la idoneïtat dels extractes obtinguts per a desenvolupar materials biopolimèrics i hidrogels per a aplicacions alimentàries. Es va poder observar que el grau de purificació de l'agar va tindre un impacte significatiu en les propietats finals tant de les pel·lícules com dels hidrogels. En el cas de les pel·lícules, les fabricades amb agar pur van presentar propietats superiors; no obstant això, van patir canvis significatius en la seua estructura semicristal·lina durant l'emmagatzematge. No obstant això, les pel·lícules derivades d'extractes d'agar menys purificats van mostrar una major estabilitat al llarg del temps, suggerint el seu potencial com a additiu per a reduir costos i millorar l'estabilitat de les pel·lícules d'agar pur. En el cas dels hidrogels, la purificació de l'agar va conduir a la formació d'hidrogels amb una resistència i duresa significativament altes. D'altra banda, el protocol d'extracció simplificat va produir fraccions d'agar menys purificades que contenien compostos addicionals com a proteïnes, polifenols i minerals. Encara que això va donar lloc a hidrogels menys rígids i resistents, aquesta característica podria ser beneficiosa per a la producció d'hidrogels amb propietats bioactives. En la tercera i última part de la tesi, es va abordar la valorització dels residus industrials generats després de l'extracció d'alginat, amb el propòsit d'obtindre fraccions de cel·lulosa mitjançant mètodes simplificats per a la seua aplicació en la producció de materials biopolimèrics. En aquest context, es va observar que els residus de Alaria esculenta i Saccharina latissima van resultar adequats per a l'extracció de fraccions cel·lulòsiques, mentre que Ascophyllum nodosum podria ser més interessant per a la producció d'extractes rics en fucoidans. Les fraccions de cel·lulosa amb major puresa van generar pel·lícules amb propietats mecàniques i aspecte visual més desitjables. En canvi, les fraccions menys purificades van presentar una major barrera al vapor d'aigua. D'acord amb els resultats, es va determinar que la simple aplicació d'un tractament alcalí pot produir fraccions de cel·lulosa que donen lloc a pel·lícules amb un equilibri òptim entre propietats funcionals i eficiència econòmica i mediambiental., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. This work was done within the framework of a collaboration with HISPANAGAR S.L (Burgos, Spain). The research was funded by the Spanish Ministry of Science, Innovation and Universities through projects PID2020-114821RB-I00, PID2020-117744RJ-I00, as well as CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge funding through project CIRCALGAE (Horizon Europe) under grant agreement 101060607. In all projects, funding from “ERDF A way of making Europe”, the “European Union” or the “European Union NextGenerationEU/PRTR” is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protein extraction from the industrial solid residue of brown seaweed after alginate extraction

  • Bojorges, Hylenne
  • Martínez Sanz, Marta
  • Fontes Candia, Cynthia
  • Díaz-Piñero, Laura
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Fabra, María José
The growing interest in the “blue-bioeconomy” and the valorization of macroalgae has driven research and industrial efforts to develop valorization strategies for the by-products generated during alginate extraction. Sequential extraction methods, such as acid/alkali treatment, enzymatic, ultrasound, and pH-shift process, were investigated and compared in order to obtain protein extracts from the solid residues after alginate extraction from two brown seaweed species (Ascophyllum nodosum and Saccharina latissima). Applying a sequential extraction, combining several methods, allowed the recovery of more than 29.5 % of the total protein from the residues. The resulting extracts exhibited optimal functional properties in terms of oil and water retention and outstanding emulsifying and foaming capacity. In addition, the protein extracts showed considerable polyphenol content, remarkable antioxidant activity, and an enhanced ability to inhibit angiotensin-converting enzyme (ACE). This study demonstrated that the residues after alginate extraction are a sustainable and promising source of protein with potential applications in the food industry., The authors acknowledge funds from the project PID2022-141638OB-I00, PID2020-117744RJ-I00, and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged. H. Bojorges expresses gratitude for the financial assistance provided by the Generalitat Valenciana in the form of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional and bioactive properties of the protein-polysaccharide extracts from brown algae: Exploring novel functional ingredients

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
The present work reports the extraction of protein-polysaccharide extracts from brown algae (A. nodosum and S. latissima) for potential food industry applications. A sequential extraction method was employed to maximize yields by incorporating ultrasound, pH adjustment, and enzymatic treatment. The resulting extracts were characterized by their composition, bioactive properties, and emulsifying capabilities. Although the overall extraction yield was significantly higher for A. nodosum extracts, the protein content in both species' extracts increased at least threefold following enzymatic treatment, with S. latissima achieving the highest protein percentages. The enzymatically treated extracts mainly consisted of low molecular weight proteins (17–25 %) and carbohydrates (59–62 %), with alginate and fucoidan as the primary polysaccharides. These extracts exhibited a high emulsifying capacity (approximately 99 %), attributed to their relatively high protein content (acting as surfactants) and lower molecular weight, which enhanced oil droplet stabilization in emulsions. The increased protein content positively correlated with angiotensin-converting enzyme (ACE) inhibitory activity. Furthermore, the antioxidant activity was higher in extracts from A. nodosum, which is linked to sulfated fucoidan/fucan structures and polyphenols., The authors wish to acknowledge funds from the grants PID2022-138328OB-C21, PID2020-117744RJ-I00 and CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and the project CIRCALGAE (Horizon Europe) under grant agreement 101060607. H. Bojorges acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIAP/2019/007)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Protein extraction from the industrial solid residue of brown seaweed after alginate extraction [DATASET]

  • Bojorges, Hylenne
  • Martínez Sanz, Marta
  • Fontes Candia, Cynthia
  • Díaz Piñero, Laura
  • Martínez-Abad, Antonio
  • López-Rubio, Amparo
  • Fabra, María José
The growing interest in the “blue-bioeconomy” and the valorization of macroalgae has driven research and industrial efforts to develop valorization strategies for the by-products generated during alginate extraction. Sequential extraction methods, such as acid/alkali treatment, enzymatic, ultrasound, and pH-shift process, were investigated and compared in order to obtain protein extracts from the solid residues after alginate extraction from two brown seaweed species (Ascophyllum nodosum and Saccharina latissima). Applying a sequential extraction, combining several methods, allowed the recovery of more than 29.5 % of the total protein from the residues. The resulting extracts exhibited optimal functional properties in terms of oil and water retention and outstanding emulsifying and foaming capacity. In addition, the protein extracts showed considerable polyphenol content, remarkable antioxidant activity, and an enhanced ability to inhibit angiotensin-converting enzyme (ACE). This study demonstrated that the residues after alginate extraction are a sustainable and promising source of protein with potential applications in the food industry., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033:PID2022-138328OB-C21, PID2020-117744RJ-I00; Generalitat Valenciana: GRISOLIAP/2019/007; Severo Ochoa Centre of Excellence: CEX2021-001189-S), and by the Horizon Europe project CIRCALGAE (Grant Agreement No. 101060607)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Functional and bioactive properties of the protein-polysaccharide extracts from brown algae: Exploring novel functional ingredients [DATASET]

  • Bojorges, Hylenne
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Fabra, María José
The present work reports the extraction of protein-polysaccharide extracts from brown algae (A. nodosum and S. latissima) for potential food industry applications. A sequential extraction method was employed to maximize yields by incorporating ultrasound, pH adjustment, and enzymatic treatment. The resulting extracts were characterized by their composition, bioactive properties, and emulsifying capabilities. Although the overall extraction yield was significantly higher for A. nodosum extracts, the protein content in both species' extracts increased at least threefold following enzymatic treatment, with S. latissima achieving the highest protein percentages. The enzymatically treated extracts mainly consisted of low molecular weight proteins (17–25 %) and carbohydrates (59–62 %), with alginate and fucoidan as the primary polysaccharides. These extracts exhibited a high emulsifying capacity (approximately 99 %), attributed to their relatively high protein content (acting as surfactants) and lower molecular weight, which enhanced oil droplet stabilization in emulsions. The increased protein content positively correlated with angiotensin-converting enzyme (ACE) inhibitory activity. Furthermore, the antioxidant activity was higher in extracts from A. nodosum, which is linked to sulfated fucoidan/fucan structures and polyphenols., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PID2020-117744RJ-I00; Generalitat Valenciana: GRISOLIAP/2019/007; Severo Ochoa Centre of Excellence: CEX2021-001189-S), co-funded by the European Regional Development Fund (ERDF, “A way of making Europe”), and by the Horizon Europe project CIRCALGAE (Grant Agreement No. 101060607)., Peer reviewed