Pasar al contenido principal

DESARROLLO DE MATERIALES BIOPOLIMERICOS DE ENVASADO DE ALIMENTOS A PARTIR DE BIOMASA DE RESIDUOS DE ORIGEN ACUATICO

RTI2018-094408-J-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and Characterization of Gel-Like Structures from Aquatic Biomass for Food Applications, Obtención y caracterización de estructuras tipo gel a partir de biomasa acuática para aplicaciones alimentarias

  • Fontes Candia, Cynthia
[ES] El objetivo de esta tesis doctoral ha sido el diseño y caracterización estructural de estructuras tipo gel basadas de polisacáridos extraídos de biomasa acuática con interés para aplicaciones relacionadas con la alimentación. Las propiedades de los polisacáridos extraídos de algas y plantas acuáticas son adecuadas para producir diferentes estructuras tipo gel basadas en la formación de redes reticuladas, como hidrogeles, aerogeles y emulsion-gels. En la primera parte de esta tesis se investigaron los diferentes mecanismos de gelificación de polisacáridos sulfatados, así como los parámetros que afectan a la estructura y las propiedades funcionales de los hidrogeles obtenidos. En base a los resultados, se evaluó la potencial aplicación de los hidrogeles y aerogeles de agar y k-carragenato para encapsular una proteína alimentaria modelo como la caseína, explorando así el efecto protector contra la hidrólisis enzimática tras digestiones gastrointestinales simuladas. En la segunda parte de esta tesis, se desarrollaron estructuras de aerogeles mediante la valorización de una fuente de biomasa residual infrautilizada, como es el Arundo donax. Con esta biomasa se generaron fracciones celulósicas con diferentes grados de purificación y extractos bioactivos solubles en agua, que posteriormente se utilizaron para producir aerogeles bioactivos híbridos. La estructura altamente porosa y la elevada capacidad de sorción de los aerogeles los convierten en excelentes candidatos para la sustitución de las almohadillas absorbentes para mantener la calidad de los productos cárnicos envasados. Los emulsion-gels son reconocidos por su gran potencial como ingredientes funcionales en la industria alimentaria como modificadores de textura y como sustitutos de grasas sólidas. Además, pueden utilizarse como vehículo para la liberación controlada de compuestos bioactivos liposolubles. Así, en la última parte de esta tesis, se investigó la naturaleza de las interacciones entre los componentes en las formulaciones de emulsion-gels basadas en polisacáridos y se relacionó con su estructura y comportamiento mecánico y reológico. Después de estudiar el mecanismo de gelificación de los emulsion-gels de carragenato, estos sistemas se adaptaron y utilizaron para dos diferentes aplicaciones relevantes para los sectores de alimentación y biomedicina. En primer lugar, se produjeron y evaluaron estructuras gelificadas a partir de emulsion-gels de agar y k-carragenato y aerogeles cargados de aceite como encapsulantes de un bioactivo lipofílico como la curcumina. Los resultados mostraron que el tipo de polisacárido y el estado físico de las redes del gel tenían un impacto en la estructura de los productos de la digestión. Por otro lado, se evaluó el potencial de los emulsion-gels basados en polisacáridos sulfatados (k-carragenato y agar) para la producción de un material capaz de simular tejido graso. Los resultados evidencian que los emulsions-gels de agar son adecuadas para producir materiales que simulan las propiedades dieléctricas para imitar tejidos de bajo y alto contenido en agua., [CA] L'objectiu d'aquesta tesi doctoral ha sigut, el disseny i caracterització estructural d'estructures tipus gel, basades en polisacàrids extrets de biomassa aquàtica amb interès per a aplicacions relacionades amb l'alimentació. Les propietats dels polisacàrids extrets d'algues i plantes aquàtiques, són adequades per a produir diferents estructures tipus gel basades en la formació de xarxes reticulades, com a hidrogels, aerogels i emulsió-gels. En la primera part d'aquesta tesi es van investigar els diferents mecanismes de gelificació de polisacàrids sulfatats, així com els paràmetres que afecten l'estructura i les propietats funcionals dels hidrogels obtinguts. Sobre la base dels resultats, es va avaluar la potencial aplicació dels hidrogels i aerogels d'agar i k-carraguenina per a encapsular una proteïna alimentària model com la caseïna, explorant així l'efecte protector contra la hidròlisi enzimàtica després de digestions gastrointestinals simulades. A la segona part d'aquesta tesi, es van desenvolupar estructures d' aerogels mitjançant la valorització d'una font de biomassa residual infrautilitzada, com és el Arundo donax. Amb aquesta biomassa es van generar fraccions cel·lulòsiques amb diferents graus de purificació i extractes bioactius solubles en aigua, que posteriorment es van utilitzar per a produir aerogels bioactius híbrids. L'estructura altament porosa i l'elevada capacitat de sorció dels aerogels els converteixen en excel·lents candidats per a la substitució dels coixinets absorbents per a mantenir la qualitat dels productes carnis envasats. Els emulsió-gels són reconeguts pel seu gran potencial com a ingredients funcionals en la indústria alimentària com a modificadors de textura i com a substituts de greixos sòlids. A més, poden utilitzar-se com a vehicle per a l'alliberament controlat de compostos bioactius liposolubles. Així, a l'última part d'aquesta tesi, es va investigar la naturalesa de les interaccions entre els components dins les formulacions d' emulsió-gels basades en polisacàrids i es va relacionar amb la seua estructura i comportament mecànic i reològic. Després d'estudiar el mecanisme de gelificació dels emulsió-gels de carraguenina, aquests sistemes es van adaptar i es van utilitzar per a dues aplicacions diferents, rellevants per als sectors de l' alimentació i la biomedicina. En primer lloc, es van produir i van avaluar estructures gelificades a partir de emulsió-gels d'agar i k-carraguenina i aerogels carregats d'oli com a encapsulants d'un bioactiu lipofílic com la curcumina. Els resultats van mostrar que el tipus de polisacàrid i l'estat físic de les xarxes del gel tenien un impacte en l'estructura dels productes de la digestió. D'altra banda, es va avaluar el potencial dels emulsió-gels basats en polisacàrids sulfatats (k-carraguenina i agar) per a la producció d'un material capaç de simular teixit gras. Els resultats evidencien que els emulsió-gels d'agar són adequats per a produir materials que simulen les propietats dielèctriques podentimitar teixits de baix i alt contingut en aigua., [EN] The aim of this doctoral thesis was to design and characterize the structure of gel-like structures based on polysaccharides extracted from aquatic biomass, with interest for food-related applications. The properties of polysaccharides extracted from seaweeds and aquatic plants make them suitable to produce a range of gel-like structures based on the formation of interconnected networks, such as hydrogels, aerogels and emulsion-gels. In the first part of this thesis, the different gelation mechanism of sulphated polysaccharides and the parameters affecting the structure and functional properties of the obtained hydrogels were investigated. Based on the results, the potential application of agar and k-carrageenan hydrogels and aerogels to encapsulate a model food protein such as casein was evaluated, thus exploring the protective effect against the enzymatic hydrolysis upon simulated gastrointestinal digestions. In the second part of this thesis, aerogel structures were developed by valorising an underutilized waste biomass source such as Arundo donax. This biomass was used to generate cellulosic fractions with different purification degrees and water-soluble bioactive extracts, which were subsequently used to produce hybrid bioactive aerogels. The highly porous structure and high sorption capacity of aerogels make them excellent candidates for the replacement of absorbent pads to maintain the quality of packaged meat products. Emulsion-gels are recognized for their great potential as functional ingredients in the food industry to modify texture and for solid fat replacement. Moreover, they can be used as a delivery vehicle for the controlled release of fat-soluble bioactive compounds. Thus, in the last part, the nature of interactions between the components in polysaccharide-based emulsion-gel formulations was investigated and related to their structure and mechanical and rheological behavior. After studying the gelation mechanism of carrageenan emulsion-gels, these systems were adapted and used for two different applications relevant to the food and biomedicine sectors. Firstly, oil-filled gel-like structures from agar and k-carrageenan emulsion-gels and oil-filled aerogels were produced and evaluated as carriers of a lipophilic bioactive such as curcumin. The results showed that the polysaccharide type and the physical state of the gel network had an impact on the structure of the digestion products. On the other hand, the potential of emulsion-gels based on sulphated polysaccharides (k-carrageenan and agar) for the production of tissue mimicking phantoms was evaluated. The results evidence that the agar emulsion-gels are suitable to produce materials simulating the dielectric properties to mimic low- and high-water content tissues., Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (2018022638 project). This work was financially supported by the grant RTI2018-094268-B-C22 (MCIU/AEI/FEDER, UE). Part of this work was supported by the COST Action ES1408 European network for algal-bioproducts (EUALGAE). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). The projects RTI2018-094268-B-C22 and RTI2018-094408-J-I00 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work has also received financial support from project PID2019-107663RB-I00 from the Spanish Ministry of Science and Innovation (MICINN). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680). Marta Martinez-Sanz is recipient of a Juan de la Cierva (IJCI-2015-23389) contract from the Spanish Ministry of Economy, Industry and Competitiveness.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of alginate-extracted seaweed biomass for the development of cellulose-based packaging films

  • Cebrián-Lloret, Vera
  • Mandy Metz
  • Martínez-Abad, Antonio
  • Svein Halvor Knutsen
  • Simon Ballance
  • López-Rubio, Amparo
  • Martínez-Sanz, Marta
[EN] Seaweed residues from Alaria esculenta, Saccharina latissima and Ascophyllum nodosum after alginate extraction have been valorized to produce cellulose-based fractions with different purification degrees. The residues were mainly composed of carbohydrates (35-57%) and proteins (12-37%), Alaria and Saccharina being richer in cellulose and Ascophyllum richer in fucoidan. The lower cellulose content in the latter made it unsuitable for the extraction of cellulosic fractions. Self-supporting films were obtained from the cellulosic fractions from Saccharina and Alaria residues. While the higher cellulose purity films presented more desirable characteristics in terms of mechanical properties (with elastic moduli of ca. 5-7 GPa and elongation values of ca. 3-5%) and visual appearance, the presence of noncellulosic components in the films from less purified fractions reduced their water sensitivity and promoted greater water barrier (with water permeability values of ca. 4-6 kg.m/s.m2.Pa). These results point towards the potential of a simple alkaline extraction to generate cellulose-based films from seaweed residuals with the best compromise between functional properties and economical and environmental efficiency., This work was financially supported by the "Agencia Estatal de Investigacion" (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Confocal Raman imaging as a useful tool to understand the internal microstructure of multicomponent aerogels

  • Benito González, Isaac
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Gómez-Mascaraque, Laura G.
This work shows the characterization of (nano)cellulosic aerogels prepared from Posidonia oceanica waste biomass by means of confocal Raman microscopy (CRM). For this aim, aerogels were prepared by simple freeze‐drying of aqueous dispersions of four (nano)cellulosic fractions with different purification degrees, tested at two different concentrations (0.5% and 2%). These were then coated with polylactic acid (PLA) in order to improve their hydrophobicity and subjected to oil sorption–desorption experiments. Both univariate and multivariate analyses, including an approach based on comparing the spectra with those of reference materials and another one based on automatic detection of components, were compared in terms of the quality and the accuracy of the information provided. Univariate analysis only provided accurate information in the simplest systems (native (nano)cellulosic aerogels), while multivariate analyses facilitated the detection of the different components even for the most complex structures. Automatic identification of components was selected as the optimal methodology, although it also underestimated the abundance of the components with the least intense Raman spectra (cellulosic clusters) in the presence of PLA and oil. Comparison with the reference materials resulted in unrealistic images for the most complex systems. Micron‐sized regions of concentrated cellulose were detected using CRM, being more abundant in the denser aerogels. Results also confirmed that PLA was preferentially located close to the surface, while oil could penetrate deeper along the matrix. Overall, the results showed the potential of Raman imaging as a novel approach for the characterization of complex biopolymeric aerogels., This work was financially supported by the project RTI2018‐094408‐J‐I00 from the Spanish Ministry of Science, Innovation and Universities, the ‘Agencia Estatal de Investigación’ and co‐funded by the European Union's Horizon 2020 research and innovation programme (ERA‐Net SUSFOOD2). Isaac Benito‐Gonzalez was recipient of an Erasmus Plus grant (European Comission Erasmus+: 2017.121178) from the Polytechnic University of Valencia (UPV) in order to carry out the experimental work at Teagasc (Fermoy, Ireland)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorisation of vine shoots for the development of cellulose-based biocomposite films with improved performance and bioactivity

  • Benito González, Isaac
  • Jaén Cano, C.M.
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Martínez Sanz, Marta
This work reports on the valorization of Tempranillo vine shoots for the development of bio-based packaging materials. Cellulose (F3) and nanocellulose (NANO F3) were produced by the conventional method, while less purified cellulosic fractions (F2A) and nanocrystals (NANO F2A) were extracted by simplified protocols (omitting Soxhlet and alkaline treatments) to reduce production costs and environmental impact and evaluate the potential added functionalities of these less purified materials. Although most of the hemicelluloses in F2A were digested upon acid hydrolysis, a small fraction remained in NANO F2A. On the other hand, the presence of a minor xylan fraction in F3 limited the access of sulphuric acid towards the cellulose microfibrils, hindering hydrolysis and producing heterogeneous fibrillar structures in NANO F3. The obtained materials were used to produce cellulosic films, as well as blends with agar, and their performance properties were evaluated. Overall, NANO F2A films showed the best compromise between performance and sustainability and presented additional antioxidant capacity. The properties of the films could be adjusted by the incorporation of agar, improving their ductility and water permeability., This work was financially supported by the project RTI2018-094408-J-I00 from the Spanish Ministry of Science, Innovation and Universities, the “Agencia Estatal de Investigación” and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2). A. Martinez-Abad acknowledges the Spanish Ministry of Science, Innovation and University, as a recipient of a Juan de la Cierva contract (IJDC-2017-31255)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional cellulosic aerogels from Posidonia oceanica waste biomass with antioxidant properties for meat preservation

  • Benito González, Isaac
  • López-Rubio, Amparo
  • Galarza-Jiménez, Paula
  • Martínez Sanz, Marta
Posidonia oceanica waste biomass has been valorized to develop bioactive multifunctional cellulosic aerogels (HCAG) by simpler and greener protocols. Hydrophobization of cellulosic aerogels was achieved through PLA coating, while bioactivity was imparted by the incorporation of hydrophilic (E2) and hydrophobic extracts (E3) produced from the same biomass. The incorporation of extracts led to denser aerogels, with less porous structures. These aerogels showed outstanding water and oil sorption capacities (1500–1900%), being able to release the adsorbed liquid almost completely after 7 days. Interestingly, all the aerogels showed a positive inhibition effect (23–91%) on the β-carotene bleaching assay. Moreover, the aerogels loaded with extracts, especially when combining E2 and E3, were able to reduce the oxidation of lipids and oxymyoglobin in red meat after 10 days of storage. This evidences the potential of these multifunctional aerogels as bioactive adsorbing pads to preserve the quality of fresh packaged foods., This work was financially supported by the BIOCARB-4-FOOD project granted by the “Agencia Estatal de Investigación” and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of alginate-extracted seaweed biomass for the development of cellulose-based packaging films

  • Cebrián-Lloret, Vera
  • Metz, Mandy
  • Martínez-Abad, Antonio
  • Knutsen, Svein Halvor
  • Ballance, Simon
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Seaweed residues from Alaria esculenta, Saccharina latissima and Ascophyllum nodosum after alginate extraction have been valorized to produce cellulose-based fractions with different purification degrees. The residues were mainly composed of carbohydrates (35–57%) and proteins (12–37%), Alaria and Saccharina being richer in cellulose and Ascophyllum richer in fucoidan. The lower cellulose content in the latter made it unsuitable for the extraction of cellulosic fractions. Self-supporting films were obtained from the cellulosic fractions from Saccharina and Alaria residues. While the higher cellulose purity films presented more desirable characteristics in terms of mechanical properties (with elastic moduli of ca. 5–7 GPa and elongation values of ca. 3–5%) and visual appearance, the presence of non-cellulosic components in the films from less purified fractions reduced their water sensitivity and promoted greater water barrier (with water permeability values of ca. 4–6 kg·m/s·m2·Pa). These results point towards the potential of a simple alkaline extraction to generate cellulose-based films from seaweed residuals with the best compromise between functional properties and economical and environmental efficiency., This work was financially supported by the “Agencia Estatal de Investigación” (PCI2018-092886 Grant) and co-funded by the European Union's Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2) and the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of polysaccharide-casein gel-like structures resistant to in vitro gastric digestion

  • Fontes Candia, Cynthia
  • Jiménez-Barrios, Pablo
  • Miralles, Beatriz
  • Recio, Isidra
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
Controlling protein digestion is a promising strategy to modulate hormonal responses involved in satiety and appetite regulation. In this context, polysaccharide-casein gel-like structures have been developed and subjected to in-vitro gastrointestinal digestions to evaluate their potential for delaying casein hydrolysis. The effect of the polysaccharide type (agar vs. κ-carrageenan), the polysaccharide:casein ratio and the physical state of the structures (hydrogels vs. aerogels) on the protection ability was investigated. The microstructure evolution of the materials upon the digestions was studied and the molecular weight distribution and peptidomic profile of the digestion products were also determined. During the gastric phase most of the developed structures exerted a protective effect and intact casein clusters were even detected in some of the formulations. In contrast, during the intestinal phase most of the casein was released and hydrolysed to a certain extent. In general, the hydrogels showed a greater protective effect than the aerogels, due to a limited diffusion of the protein towards the liquid medium. Moreover, a higher polysaccharide:protein ratio produced stronger gel networks which provided greater protection. In particular, agar-based and κ-carrageenan hydrogels with 25% polysaccharide and agar-based aerogels with 75% polysaccharide would be the most optimum for delaying casein digestion, since they were able to preserve intact casein after the gastric phase while promoting the release of peptides during the intestinal phase., The projects RTI2018-094268-B-C22 and RTI2018-094408-J-I00 were funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work has also received financial support from project PID2019-107663RB-I00 from the Spanish Ministry of Science and Innovation (MICINN). Cynthia Fontes-Candia is recipient of a pre-doctoral grant from CONACYT (MEX/Ref. 306680)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable starch biocomposite films fully-based on white rice (Oryza sativa) agroindustrial by-products

  • Benito González, Isaac
  • Ortiz-Gimeno, María del Mar
  • López-Rubio, Amparo
  • Martínez-Abad, Antonio
  • Garrido Fernández, A.
  • Martínez Sanz, Marta
In this work, starch biocomposites fully-based on the valorization of white rice agroindustrial by-products have been produced by melt mixing. The film matrix consisted on rice flour (RF) or rice starch (RS) obtained, which was reinforced with cellulose-rich nanocrystals obtained through simplified extraction processes from rice husks (CN-RH) and rice straw (CN-RW). The presence of impurities in RF induced the re-crystallization of starch, producing more crystalline films with better mechanical performance, but greater water vapor permeability than RS. This was overcome by the addition of 15% (w/w) cellulosic nanocrystals. Moreover, the cellulosic nanocrystals increased the stiffness of the films, with the CN-RW yielding better mechanical performance due to their more homogeneous morphology and distribution within the RF matrix. Interestingly, all the RF films showed remarkable antioxidant capacity (>20% inhibition of β-carotene bleaching), highlighting the potential of less purified materials to develop sustainable food packaging with additional functionalities., M. M. Ortiz-Gimeno was recipient of a JAE-Intro grant from CSIC (JAEINT20_EX_0182) and A. Martínez-Abad is recipient of a Juan de la Cierva Incorporación contract (IJDC-2017-31255) from the Spanish Ministry of Economy, Industry and Competitiveness. This work was also financially supported by the RTI2018-094408-J-I00 project (MCIU/AEI/FEDER,UE) and the BIOCARB-4-FOOD project granted by the “Agencia Estatal de Investigación” and co-funded by the European Union’s Horizon 2020 research and innovation programme (ERA-Net SUSFOOD2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructural changes in polysaccharide-casein gel-like structures upon in vitro gastrointestinal digestion

  • Fontes Candia, Cynthia
  • Díaz-Piñero, Laura
  • Martínez, Juan Carlos
  • Gómez-Mascaraque, Laura G.
  • López-Rubio, Amparo
  • Martínez Sanz, Marta
This work reports on the nanostructural changes taking place during the in vitro gastrointestinal digestion of polysaccharide-casein gel-like structures through the use of small angle X-ray scattering (SAXS). The results indicated that during the gastric phase, the hydrolysis of casein led to a swelling of the micellar structure, yielding peptide clusters. The presence of sulphated polysaccharides such as agar and κ-carrageenan was seen to limit the hydrolysis of casein during the gastric phase, hence decreasing the size of the formed clusters. After the intestinal phase, the produced peptidic fragments appeared to interact with the bile salts present in the digestion medium, yielding a mixture of bile salt lamellae/micelles and vesicular structures. However, in the presence of polysaccharides, which can interact with bile salts, the formation of vesicular structures was limited. Interestingly, the inclusion of casein within hybrid gel-like structures led to the formation of strong polysaccharide-protein interactions, especially in the case of κ-carrageenan. As a result, in some of the formulations, polysaccharide-peptide complexes were released towards the liquid medium, which formed larger vesicular structures. This was related to the greater protective effect of these particular gel-like structures. Furthermore, κ-carrageenan hindered the formation of bile salt lamellae/micelles. These results are of high relevance to understand the intestinal transport mechanism of the digestion products from protein-based ingredients and will allow a rational design of novel products with optimum nutritional and functional properties., This work was financially supported by the projects RTI2018-094408-J-I00 and RTI-2018-094268-B-C22, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposals 2021055177 and 2022025569). Laura Díaz-Piñero is recipient of a pre-doctoral JAE grant from CSIC (JAEINT_21 _03398_)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of polysaccharide-protein interactions on the multi-scale structure of hybrid micellar casein-xanthan gum systems

  • Aljewicz, Marek
  • Keklik, Mehtap
  • Recio, Isidra
  • Martínez Sanz, Marta
This study reports on the effect of pH and polysaccharide concentration (protein:polysaccharide ratios of 95:5, 85:15 and 75:25) on the interactions established between xanthan gum (XG) and micellar casein (MC), investigating the impact on the type of structures formed at the micro- and nanoscale. At pH ≥ 6, the micellar casein formed stable suspensions where micelles with diameters of ca. 130–150 nm showed a compact inner structure stabilised by colloidal calcium phosphate (CCP) nanoclusters, while at pH ≤ 3, a more loosely packed interconnected network structure, stabilised by protein-protein interactions, was noted. The addition of XG, even at low MC:XG ratios (95:5), resulted in increased stability of the system, preventing the formation of micelle aggregates at the microscale, and reducing the pH range at which casein precipitated close to the isoelectric point. For all the XG loadings, coacervates were formed at pH = 2–3 due to polysaccharide-protein electrostatic interactions, leading to separation into a solid gel-like phase composed of polysaccharide-protein fibrillar structures and a liquid phase rich in protein. At the nanoscale, XG was mostly coating the micelles and filling in the inner water channels when added at MC:XG ratios ≤85:15, while the higher polysaccharide content at the ratio 75:25 allowed to form an interconnected structure. Therefore, by adjusting pH and XG concentration, it is possible to improve casein stability, reduce agglomeration and manipulate the size of protein-polysaccharide complexes formed. This will be of great relevance for the development of novel food formulations with improved stability and modulated sensory and nutritional properties., This work was financially supported by the projects RTI2018-094408-J-I00 and RTI-2018-094268-B-C22, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022025569). The publication was written as a result of the author's internship in Instituto de Investigación en Ciencias de la Alimentación, co-financed by the European Union under the European Social Fund (Operational Program Knowledge Education Development), carried out in the project Development Program at the University of Warmia and Mazury in Olsztyn (POWR.03.05. 00-00-Z310/17)., Peer reviewed