Pasar al contenido principal

HACIA EL BIOSENSADO HOLOGRAFICO AVANZADO

PID2019-110713RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly sensitive homogeneous-heterogeneous nanogold-based microimmunoassays for multi-residue screening of pesticides in drinking water

  • Dobosz, P.
  • Puchades, Rosa|||0000-0002-9329-1593
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] A homogeneous-heterogeneous immunoassay based on the use of antibody modified gold nanoparticles, 5 and 50 nm in diameter, is developed with and without signal amplification. The assays involve the capture of the target analytes in the homogeneous phase and subsequent detection of the immunoreaction product, following a heterogeneous scheme performed on a regular DVD. The analytical approach was evaluated developing multiplexed competitive immunoassays for the determination of residues of the pesticides chlorpyrifos and azoxystrobin as model targets. The results revealed that homogeneous immunocapture strategy improves considerably the assay performance, giving better assay sensitivity when compared to the standard heterogeneous immunoassay format. Under the best conditions, the least detectable level for chlorpyrifos and azoxystrobin were 0.1 ¿g/L. The immunoassays were also highly selective, showing little or no cross-reactivity with other structurally similar compounds. The immunocapture approach was assessed by the analysis of water. The analytical sensitivity was compared with that of reference chromatographic methods, and recovery results agreed. The good recoveries obtained (mean values ranging between 80% and 125%) make this strategy a suitable screening biosensing methodology for either environmental monitoring or laboratory quantification of pesticide residues without sample treatment in a maximum time of 65 min at lower cost., S.M awards grants PID2019-110713RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. PROMETEO/2020/094, Proyecto 88/2021 Nominativa Accion 2021-12. Dr. A. Abad-Fuentes kindly provided the anti-azoxystrobin antibody and the corresponding coating conjuagte.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DNA -based hydrogels for high-performance optical biosensing application

  • Zezza, Paola
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] Analyte-sensitive DNA-based hydrogels find multiple applications in the field of biosensors due to their adaptable nature. Here, the design of DNA-based hydrogel and its application as sensing platform for the detection of a specific target sequence are presented. DNA-functionalized hydrogel structures were formed via a free radical co-polymerization process. A simple one-step probe immobilization procedure is reported: DNA probe molecules are added to the photoactive polymer mixture, dispensed onto a solid support, or a mold, and covalently attached while the hydrogel is formed through UV light exposure. Such hydrogels can be synthesized with desired recognition ability through the selection of a certain nucleotide sequence. Here we show the application of DNA -based hydrogel to detect the target with high performance in fluorescence microarray format and, additionally, to fabricate holographic surface relief gratings for label-free sensing assays., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (ADBIHOLPID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucio acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018035355-I). Also, P. Zezza acknowledges Generalitat Valenciana for her Grisolia fellowship grant. The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Patterned Biolayers of Protein Antigens for Label-Free Biosensing in Cow Milk Allergy

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Puchades, Rosa|||0000-0002-9329-1593
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
[EN] This paper focuses on creating one-dimensional diffractive grooved structures of antigen proteins on glass substrates for the label-free detection of antibodies to dairy allergens. In particular, the fabrication of protein structures is carried out by combining microcontact printing with physisorption, imines coupling, and thiol-ene click chemistry. The work first sets up these patterning methods and discusses and compares the main aspects involved in them (structure, biolayer thickness, functionality, stability). Homogeneous periodic submicron structures of proteins are created and characterized by diffractive measurements, AFM, FESEM, and fluorescence scanning. Then, this patterning method is applied to proteins involved in cow milk allergy, and the resulting structures are implemented as optical transducers to sense specific immunoglobulins G. In particular, gratings of bovine serum albumin, casein, and ß-lactoglobulin are created and assessed, reaching limits of detection in the range of 30¿45 ng·mL¿1 of unlabeled antibodies by diffractive biosensing., Grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and cofunded by "ERDF A way of making Europe", Generalitat Valenciana (PROMETEO/2020/094), and Universitat Politecnica de Valencia (PAID-06-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An all-in-one point-of-care testing device for multiplexed detection of respiratory infections

  • Teixeira, William|||0000-0002-6729-9508
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Sena-Torralba, Amadeo
  • Gozalbo-Rovira, Roberto
  • Rodríguez-Díaz, Jesús
  • Navarro, David
  • Giménez-Romero, David
[EN] The impact of the COVID-19 pandemic has reinforced the need for rapid, cost-effective, and reliable point-of-care testing (POCT) devices for massive population screening. The co-circulation of SARS-CoV-2 with several seasonal respiratory viruses highlights the need for multiplexed biosensing approaches. Herein, we present a fast and robust all-in-one POCT device for parallel viral antigen and serological analysis. The biosensing approach consists of a functionalized polycarbonate disc-shaped surface with microfluidic structures, where specific bioreagents are immobilized in microarray format, and a portable optoelectronic analyzer. The biosensor quantifies the concentration of viral antigens and specific immunoglobulins G and M for SARS-CoV-2, influenza A/B, adenovirus, and respiratory syncytial virus, using 30¿¿L of a sample. The semi-automated analysis of 6 samples is performed in 30¿min. Validation studies performed with 135 serum samples and 147 nasopharyngeal specimens reveal high diagnostic sensitivity (98¿100%) and specificity (84¿98%), achieving an excellent agreement (¿¿=¿0.937) with commercial immunoassays, which complies with the World Health Organization criteria for POC COVID-19 diagnostic tests. The versatility of the POCT device paves the way for the detection of other pathogens and analytes in the incoming post-pandemic world, integrating specific bioreagents against different variants of concerns and interests., W. T and A. J-D acknowledge the financial support for the Ph.D. studies (PAID-19-01-06 and FPI-UPV 2017 grants, respectively). S.M awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe." A.M awards grant DOGV no. 8815, May 19, 2020, pp. 16712-16726. The research was also supported by the Generalitat Valenciana (PROMETEO/2020/094, Proyecto "88/2021"). The authors gratefully acknowledge the outstanding contribution of Alicia Parra, Violeta Espada, Roberto Renuncio, and Jose A. Marzal for collecting the nasopharyngeal swab samples from the Health Centre of the Universitat Politecnica de Valencia. We also gratefully thank Dr. L. Mira and G. Rios for carefully reading this manuscript and the four anonymous reviewers for their insightful comments and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Estrategias analíticas integradas para potenciar la sensibilidad de los inmunoensayos de flujo lateral en entornos de punto de atención clínica

  • Banguera Ordóñez, Yulieth Deifan
[ES] Actualmente existe un creciente interés por desarrollar sistemas bioanalíticos robustos, sostenibles y capaces de proporcionar información molecular confiable en tiempos reducidos. Una vía eficaz para lograrlo es el diseño de dispositivos altamente integrados que permitan realizar pruebas Point-of-Care (PoC), es decir, analisis efectuados en el mismo lugar y momento de la toma de muestra. Estos dispositivos son esenciales tanto en entornos que requieren resultados inmediatos, como urgencias u atención primaria, como en contextos donde el usuario no especializado debe ejecutar la prueba, incluidos hogares o lugares de trabajo. Ejemplos emblemáticos de estos ensayos son la prueba de embarazo y los test rápidos de COVID-19. Para satisfacer las necesidades actuales, los ensayos PoC deben ser económicos, sencillos, selectivos y sensibles, ofrecer resultados rápidos y fiables, y no depender de equipamiento adicional. En este marco, el inmunoensayo en flujo lateral (LFIA) ha demostrado ser una herramienta versátil durante más de siete décadas en campos clínicos, alimentarios y medioambientales. Su éxito radica en su excelente relación coste-efectividad, al estar fabricado con materiales basados en papel, y en su arquitectura simple, que permite el flujo capilar en un solo paso. Sin embargo, su principal ventaja, el corto tiempo de reacción, también constituye una limitación: la interacción antígeno-anticuerpo es breve, lo que disminuye la sensibilidad analítica en comparación con técnicas como ELISA, cuyos tiempos de incubación son mucho más largos. Esto restringe la aplicabilidad del LFIA en el ámbito clínico, donde muchos biomarcadores relevantes se encuentran en niveles pico-femtomolares y pueden estar enmascarados por proteínas plasmáticas mucho más abundantes. Por ello, la investigación reciente se ha centrado en estrategias para mejorar la sensibilidad del LFIA mediante pretratamiento de muestras, amplificación de señal o aumento del tiempo de interacción. En este contexto se sitúan los tres desarrollos presentados en esta tesis, organizados en capítulos equivalentes a tres publicaciones científicas. El primer trabajo propone una estrategia simple y económica basada en nanopartículas de carbono como transductores colorimétricos. Estas nanopartículas generan un color negro con una relación señal-ruido muy superior a la de las nanopartículas de oro, permitiendo mejorar 55 veces el límite de cuantificación y alcanzar 1.5 ng/mL en la detección de lactato deshidrogenasa (LDH) en suero humano. El segundo estudio emplea nanopartículas de europio Bright-Dtech-614 como etiquetas fluorescentes de tiempo resuelto. Gracias a su rendimiento cuántico del 70 % y una eficiencia de conjugación del 90%, logrando un límite de detección de 38 pg/mL, mejorando la sensibilidad en 686, 15 y 2.9 veces respecto a LFIA con oro, carbono y ELISA, respectivamente. El tercer trabajo presenta un sistema innovador basado en la modulación del flujo mediante electroforesis, usando un dispositivo portátil impreso en 3D que permite etapas controladas de incubación y lavado directamente en la tira. Este formato alcanzó un límite de detección de 70 pg/mL para h-LDH utilizando nanopartículas de oro, lo que supone una mejora de sensibilidad de 367 veces frente al LFIA convencional. En conjunto, estas tres estrategias demuestran un gran potencial para impulsar la medicina de precisión en el punto de atención, permitiendo la cuantificación de biomarcadores clínicamente relevantes de forma rápida, económica y adaptable mediante el uso de distintos elementos de bioreconocimiento, [CA] Actualment existeix un interès creixent pel desenvolupament de sistemes bioanalítics robusts i sostenibles capaços de proporcionar informació molecular precisa en temps reduïts. Una estratègia adequada per donar resposta a aquesta necessitat és la implementació de sistemes altament integrats que permeten solucions Point-of-Care (PoC), definides com proves diagnòstiques realitzades en el mateix lloc i moment de la presa de mostra. Aquest tipus d'assajos és especialment rellevant en entorns que requereixen resultats immediats, com les unitats d'emergència o les consultes d'atenció primària, així com en espais on les proves poden ser efectuades per personal no especialitzat, com domicilis o llocs de treball. Entre els exemples més exitosos d'assajos PoC en format de tira reactiva es troben la prova d'embaràs i els glucòmetres. Per aquest motiu, en els darrers anys la recerca s'ha orientat cap a estratègies que milloren la sensibilitat del LFIA mitjançant pretractament de mostra, amplificació de senyal o modulació del temps d'interacció antigen-anticòs. En aquest marc s'emmarquen els objectius de la present tesi, estructurada en tres capítols que corresponen a tres publicacions científiques. El primer capítol presenta una estratègia econòmica i senzilla basada en l'ús de nanopartícules de carboni com a transductors colorimètrics. Aquestes nanopartícules proporcionen una relació senyal-soroll notablement superior a la de les nanopartícules d'or, millorant 55 vegades el límit de quantificació i assolint 1,5 ng/mL en la detecció de lactat deshidrogenasa (LDH) en sèrum humà. El segon capítol descriu una estratègia basada en nanopartícules d'europi com a transductors fluorescents. Les Bright-Dtech-614, amb un rendiment quàntic del 70% i un 90% d'eficiència de conjugació, permeten un límit de detecció de 38 pg/mL per a LDH, amb millores de sensibilitat de 686, 15 i 2,9 vegades respecte a plataformes basades en nanopartícules d'or, nanopartícules de carboni i ELISA estàndard. El tercer capítol presenta un dispositiu electroforètic portàtil imprés en 3D, capaç de realitzar etapes iteratives d'incubació i rentat directament sobre la tira de nitrocel·lulosa. Amb nanopartícules d'or com a transductors, aquesta plataforma aconsegueix un límit de detecció de 70 pg/mL per a LDH humana, equivalent a una millora de 367 vegades davant del LFIA convencional. En conjunt, les tres estratègies desenvolupades en aquesta tesi mostren un alt potencial per avançar en la medicina de precisió al punt d'atenció, permetent la quantificació ràpida, sensible i econòmica de biomarcadors clínicament rellevants, amb una versatilitat que facilita la seua adaptació a múltiples aplicacions mitjançant el simple reemplaçament dels elements de bioreconeixement., [EN] There is increasing interest in developing robust and sustainable bioanalytical systems capable of providing high-quality molecular information in short timeframes. A promising strategy involves highly integrated diagnostic platforms that enable Point-of-Care (PoC) testing, defined as diagnostic assays performed directly at the time and place of sample collection. These tests are essential in settings requiring rapid results, such as emergency units or primary care clinics, and in contexts where analyses must be performed by non-specialized users, including workplaces or home environments. Classic examples of PoC tests based on lateral flow formats are pregnancy tests and COVID-19 rapid assays. To meet current diagnostic demands, PoC tests must be cost-effective, simple to operate, analytically reliable, and capable of delivering sensitive and selective results without the need for external instrumentation. Within this framework, the lateral flow immunoassay (LFIA) has demonstrated remarkable versatility over the past 70 years across fields such as clinical diagnostics, food safety, and environmental monitoring. More recently, LFIA technologies were critical during the COVID-19 pandemic for both serological screening and antigen detection. Their success is largely attributable to their low-cost, paper-based design and straightforward architecture, which relies on capillary flow through overlapping pads on a support. This one-step format is highly advantageous; however, the very short assay time (10-15 minutes) significantly limits the duration of antigen-antibody interactions, ultimately reducing analytical sensitivity in comparison to ELISA assays with longer incubation times. This constraint hinders LFIA applicability in the detection of clinically relevant biomarkers present at pico- to femtomolar concentrations, often masked by abundant plasma proteins. For this reason, recent research efforts have focused on improving LFIA sensitivity through sample pretreatment, signal amplification, or modulation of antigen-antibody interaction dynamics. This thesis addresses these challenges through three complementary strategies, each presented as a scientific publication. Chapter 1 introduces a cost-effective approach using carbon nanoparticles (CNPs) as colorimetric signal transducers. CNPs generate a deep-black signal that provides a significantly higher signal-to-noise ratio than gold nanoparticles (AuNPs), improving the limit of quantification 55-fold and achieving 1.5 ng/mL for lactate dehydrogenase (LDH) detection in human serum. Chapter 2 explores the use of europium nanoparticles (EuNPs) as fluorescent time-resolved reporters. Bright-Dtech-614 EuNPs exhibit a 70% luminescence quantum yield and 90% antibody-conjugation efficiency, enabling an LDH detection limit of 38 pg/mL. This corresponds to improvements of 686-fold over AuNP-LFIA, 15-fold over CNP-LFIA, and 2.9-fold over standard ELISA. Chapter 3 presents a novel strategy based on electrophoretic flow modulation. A lightweight (151 g), 3D-printed electrophoretic device was developed, capable of performing iterative incubation and washing steps directly on the LFIA strip¿an impossibility for traditional capillary-driven systems. Using AuNPs as reporters, this platform achieved a detection limit of 70 pg/mL for human LDH, representing a 367-fold improvement compared to conventional LFIA. Collectively, these three approaches demonstrate substantial potential to advance precision medicine at the point of care by enabling the rapid, cost-effective, and highly sensitive quantification of clinically relevant biomarkers. Moreover, their versatility allows adaptation to a wide range of targets through the substitution of biorecognition elements., Y.D.B.O. acknowledges the financial support of the Ministerio de Ciencia Tecnología e Innovación Scholarship Program No. 8852 of Colombia. A.S. acknowledges Generalitat Valenciana and the European Social Fund for the CIAPOS fellowship (CIAPOS/2022/7). S.M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by "ERDF A way of making Europe”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Gutiérrez-Ramírez, Manuel
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Pascual, Inmaculada
  • Esquerdo Lloret, Tomás Vicente
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N¿-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated., This research was developed under project PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021- 1231240B-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program) funded by Generalitat Valenciana, Spain; and under project UAFPU20-23 funded by Universidad de Alicante.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Bragg gratings of proteins patterned on integrated waveguides for (bio)chemical analysis

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Bru-Orgiles, Luis Alberto
[EN] The incorporation of biomacromolecules onto silicon waveguiding microstructures constitutes a growing trend that pushes towards compact and miniaturized biosensing systems. This paper presents the integration of one-dimensional periodic nanostructures of proteins on the surface of micrometric silicon waveguides for transducing binding events between biomacromolecules. The study demonstrates this new bioanalytical principle by experimental results and theoretical calculations, and proves that rib waveguides (1-¿1.6-µm width) together with protein gratings (495-¿515-nm period) display suitable spectral responses for this optical biosensing system. Protein assemblies of bovine serum albumin are fabricated on the surface of silicon nitride waveguides, characterized by electron microscopy, and their response is measured by optical frequency domain reflectometry along the fabrication process and the subsequent stages of the biorecognition assays. Detection and quantification limits of 0.3 and 3.7 µg·mL¿1, respectively, of specific antibodies are inferred from experimental dose¿response curves. Among other interesting features, the results of this study point towards new miniaturized and integrated sensors for label-free bioanalysis., Funding was provided by grants PID2019-110713RB-I00, TED2021-132584B-C21, and PID2019-110877GB-I00 funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and co-funded by ERDF A way of making Europe , Ministerio de Economía y Competitividad (TEC2016-80385-P), Generalitat Valenciana (PROMETEO/2020/094, PROMETEO/2021/015, IDIFEDER/2021/046), and Universitat Politècnica de València (PAID-06 22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Holographic Recording of Unslanted Volume Transmission Gratings in Acrylamide/Propargyl Acrylate Hydrogel Layers: Towards Nucleic Acids Biosensing

  • Zezza, Paola
  • Naydenova, Izabela
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The role of volume hydrogel holographic gratings as optical transducers in sensor devices for point-of-care applications is increasing due to their ability to be functionalized for achieving enhanced selectivity. The first step in the development of these transducers is the optimization of the holographic recording process. The optimization aims at achieving gratings with reproducible diffraction efficiency, which remains stable after reiterative washings, typically required when working with analytes of a biological nature or several step tests. The recording process of volume phase transmission gratings within Acrylamide/Propargyl Acrylate hydrogel layers reported in this work was successfully performed, and the obtained diffraction gratings were optically characterized. Unslanted volume transmission gratings were recorded in the hydrogel layers diffraction efficiencies; up to 80% were achieved. Additionally, the recorded gratings demonstrated stability in water after multiple washing steps. The hydrogels, after functionalization with oligonucleotide probes, yields a specific hybridization response, recognizing the complementary strand as demonstrated by fluorescence. Analyte-sensitive hydrogel layers with holographic structures are a promising candidate for the next generation of in vitro diagnostic tests., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Science and Innovation (ADBIHOL-PID2019-110713RB-I00/AEI/10.13039/501100011033) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucio acknowledges MINECO for her Juan de la Cierva-Incorporacion grants (IJC 2018-035355-I). P. Zezza acknowledges the Generalitat Valenciana for her S. Grisolia grant and the UPV for the mobility grant (BEFPI 2022). Funding was also received from Aid for First Research Projects (PAID-06-22) and the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). Partially funded by the European Space Agency, through PEA4000129503 collaborative project: Wound Healing In Space: Key challenges towards Intelligent and Enabling Sensing platforms.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Water-assisted synthesis of stable and multicolored CsPbX3@SiO2 core shell nanoparticles as fluorescent probes for biosensing

  • Collantes-Pablo, Cynthia
  • Teixeira, William|||0000-0002-6729-9508
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Colloidal lead halide perovskite nanocrystals are highly luminescent materials with great promise as fluorescent probes in biosensing as long as their intrinsic instability in aqueous media is effectively addressed. In this study, we successfully prepared stable and multicolored CsPbX3@SiO2 (X = Cl/Br, Br and I) core¿ shell nanoparticles through a simple method based on the water-induced transformation of Cs4PbX6 into CsPbX3, combined with sol¿gel procedures. We observed that the concentration of the Cs4PbX6 precursor plays a crucial role in the formation of isolated nanospheres with uniform silica coating and in controlling the number of core-free particles. Furthermore, our research expands this approach to other halide compositions, resulting in multicolored core¿shell nanoparticles with emission wavelengths ranging from 490 to 700 nm, average sizes below 30 nm, and photoluminescence quantum yields close to 60%. Unlike in previous reports, the silica coating boosts the photoluminescence quantum yields compared to uncoated counterparts and provides increased structural stability for more than four days. Moreover, a controlled thermal treatment confers water stability to the as-synthesized nanoparticles. To establish the feasibility of the developed materials as fluorescent probes, we successfully demonstrated their specific recognition of a humanized antibody (omalizumab) used in treating patients with severe allergic asthma. This work paves the way to develop in vitro tests using CsPbX3@SiO2 core¿shell nanoparticles as fluorogenic probes., This work was financially supported by the E.U FEDER project ADBIHOL/AEI/10.13039/501100011033 from MCIN/AEI and PROMETEO/2020/094 from Generalitat Valenciana. C. C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (BES-2017-080242). W. T. acknowledges the financial support from Universitat Politécnica de Valéncia for the Ph.D. studies (PAID-01-19-06).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of skeletally diverse ß-lactam haptens for the in vitro diagnosis of IgE-mediated drug allergy

  • Peña-Mendizábal, Edurne
  • Hua, Bruce K.
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Schreiber, Stuart L.
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] We present the first synthesis of beta-lactam-derived haptens, leveraging the principles of diversity-oriented synthesis to discover compounds for drug allergy in vitro testing. We designed, synthesised, and performed in vitro immunological evaluation on 18 structurally diverse haptens derived from beta-lactam antibiotics. The antigens obtained with the synthesised haptens allow for the detection of specific anti-beta-lactam immunoglobulins G and E. Excellent diagnostic sensitivity (83%) and specificity (100%) were achieved when the panel of antigens was tested against a cohort of 31 human serum samples using a multiplexed compact disc-based in vitro testing tool. We posit that adopting this strategy could aid beta-lactam delabeling initiatives., This work was supported by the H2020 program (project COBIOPHAD, grant agreement No. 688448), Agencia Estatal de Investigacion (PID2019-110713RB-I00, FEDER awarded to S.M.); Generalitat Valenciana (PROMETEO/2020/094 awarded S.M.); and the National Institute of General Medical Sciences (GM- 1R35GM127045 awarded to S.L.S.). E.P.M. was supported by an FPU fellowship from the Ministerio de Educacio¿n, Cultura y Deporte (FPU15/01738 and EST18/00360). B.K.H. was supported by a fellowship from the National Science Foundation (DGE1144152 and DGE1745303).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

New materials with advanced properties for label-free optical biosensing

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
[ES] La tesis doctoral titulada "Nuevos materiales con propiedades avanzadas para biosensado óptico sin marcaje" aborda el desarrollo de biosensores ópticos sin marcaje basados en hidrogeles biofuncionalizados transformados en redes difractivas que actúan como transductores ópticos, respondiendo a las demandas del diagnóstico in vitro, la medicina personalizada y las tecnologías portátiles para monitoreo en tiempo real. En el Capítulo 1 se presentan los conceptos fundamentales sobre biosensores, sus tipos, componentes y funcionamiento, destacando los biosensores holográficos y los hidrogeles como matrices de soporte, y proponiendo el uso de hidrogeles con anillos deslizantes para biosensado holográfico. El Capítulo 2 define los objetivos generales y específicos de la investigación, desarrollados en los capítulos experimentales. El Capítulo 3 ofrece una revisión crítica del estado del arte de biosensores holográficos basados en hidrogeles, sus principios de fabricación, métodos de detección y aplicaciones biomédicas, justificando la combinación de redes difractivas y polímeros sensibles como enfoque experimental. En el Capítulo 4 se presentan biosensores con redes de relieve superficial sobre hidrogeles de acrilamida biofuncionalizados con albúmina sérica bovina, demostrando detección directa de anticuerpos anti-BSA sin marcadores, optimizando transparencia y capacidad de hinchamiento, y logrando detecciones en niveles sub-mg L-1, además de validar detección de inmunoglobulinas G. El Capítulo 5 introduce hidrogeles tipo slide-ring con polirotaxanos, mejorando sensibilidad y estabilidad, reduciendo bioreceptores y validando clínicamente el sistema con sueros reales con recuperaciones del 70-75%. El Capítulo 6 se enfoca en la detección de la proteína C reactiva, biomarcador clave en inflamación y riesgo cardiovascular, mediante un hidrogel con fosforilcolina y polirotaxanos metilados, alcanzando límites de detección de 0,3 mg L-¹ y recuperaciones del 91-99%, demostrando alta sensibilidad y especificidad con ensayos de una hora. El Capítulo 7 desarrolla redes holográficas de volumen en hidrogeles biofuncionalizados mediante interferencia de doble haz, obteniendo biosensores portátiles, sensibles y estables, validados en el Centre for Industrial and Engineering Optics de la TU Dublin, consolidando bases para futuras aplicaciones clínicas. El Capítulo 8 compara metodologías de grabación con máscaras de fase y estrategias de incorporación del biorreceptor, demostrando que la unión dinámica mediante ciclodextrinas móviles mejora notablemente la biodisponibilidad y sensibilidad del sistema, aportando una innovación relevante en el control dinámico de elementos bioactivos en materiales blandos. Finalmente, el Capítulo 9 resume las conclusiones generales, confirmando el éxito en el desarrollo de hidrogeles biofuncionalizados aplicables a biosensores ópticos sin marcaje, caracterizados por especificidad, reproducibilidad, bajo coste y viabilidad para aplicaciones reales. En conjunto, la tesis aporta un recorrido integral desde la teoría hasta la validación experimental, demostrando la viabilidad de biosensores regenerables, adaptativos y portátiles para diagnóstico temprano y personalizado, abriendo nuevas perspectivas para la biomedicina, los dispositivos wearables y las tecnologías de atención primaria., [CA] La tesi doctoral titulada «Nous materials amb propietats avançades per al biosensat òptic sense marcadors» se centra en el desenvolupament de biosensors òptics sense marcadors basats en hidrogels biofuncionalitzats que es transformen en xarxes difractives que actuen com a transductors òptics, responent a les demandes actuals en diagnòstic in vitro (IVD), medicina personalitzada i tecnologies portàtils per al monitoratge en temps real. El Capítol 1 presenta els conceptes fonamentals dels biosensors, els seus tipus, components i funcionament, destacant els biosensors hologràfics i els hidrogels com a matrius de suport, i proposant l'ús d'hidrogels d'anells lliscants per al biosensat hologràfic. El Capítol 2 defineix els objectius generals i específics de la investigació, desenvolupats al llarg dels capítols experimentals. El Capítol 3 ofereix una revisió crítica de l'estat de l'art dels biosensors hologràfics basats en hidrogels, els seus principis de fabricació, mètodes de detecció i aplicacions biomèdiques, justificant la combinació de xarxes difractives i polímers sensibles com a enfocament experimental. El Capítol 4 presenta biosensors amb xarxes de relleu superficial (SRGs) sobre hidrogels d'acrilamida biofuncionalitzats amb albúmina sèrica bovina (BSA), demostrant la detecció directa d'anticossos anti-BSA sense marcadors, optimitzant la transparència i la capacitat d'inflament, aconseguint deteccions en nivells sub-mg L¿¹, i validant la detecció d'immunoglobulina G (IgG). El Capítol 5 introdueix hidrogels d'anells lliscants amb polirotaxans, millorant la sensibilitat i estabilitat, reduint la quantitat de bioreceptors necessaris i validant clínicament el sistema amb sèrums reals, obtenint recuperacions entre el 70 i el 75%. El Capítol 6 se centra en la detecció de la proteïna C reactiva (CRP), biomarcador clau d'inflamació i risc cardiovascular, mitjançant un hidrogel amb fosforilcolina i polirotaxans metilats, assolint límits de detecció de 0,3 mg L¿¹ i recuperacions entre el 91 i el 99%, demostrant alta sensibilitat i especificitat amb assaigs d'una hora. El Capítol 7 desenvolupa xarxes hologràfiques de volum (VHGs) en hidrogels biofuncionalitzats mitjançant interferència de doble feix, obtenint biosensors portàtils i estables, validats al Centre for Industrial and Engineering Optics de la TU Dublin, establint les bases per a futures aplicacions clíniques. El Capítol 8 compara metodologies d'enregistrament hologràfic amb màscares de fase i estratègies d'incorporació de bioreceptors, demostrant que la unió dinàmica mitjançant ciclodextrines mòbils millora significativament la biodisponibilitat i sensibilitat del sistema, aportant una innovació rellevant en el control dinàmic d'elements bioactius en materials tous. Finalment, el Capítol 9 resumeix les principals conclusions, confirmant l'èxit en el desenvolupament d'hidrogels biofuncionalitzats aplicables a biosensors òptics sense marcadors, caracteritzats per especificitat, reproductibilitat, baix cost i viabilitat pràctica. En conjunt, la tesi ofereix un recorregut complet des de les bases teòriques fins a la validació experimental, demostrant la viabilitat de biosensors regenerables, adaptatius i portàtils per al diagnòstic primerenc i personalitzat, obrint noves perspectives en biomedicina, dispositius portables i tecnologies d'atenció primària., [EN] The doctoral thesis entitled "New Materials with Advanced Properties for Label-Free Optical Biosensing" focuses on the development of label-free optical biosensors based on biofunctionalized hydrogels that transform into diffractive networks acting as optical transducers, addressing current demands in in vitro diagnostics (IVD), personalized medicine, and portable technologies for real-time monitoring. Chapter 1 presents the fundamental concepts of biosensors, their types, components, and operation, emphasizing holographic biosensors and hydrogels as support matrices, and proposing the use of slide-ring hydrogels for holographic biosensing. Chapter 2 defines the general and specific objectives of the research, developed throughout the experimental chapters. Chapter 3 provides a critical review of the state of the art in holographic biosensors based on hydrogels, their fabrication principles, detection methods, and biomedical applications, justifying the combination of diffractive networks and responsive polymers as an experimental approach. Chapter 4 presents biosensors with surface relief gratings (SRGs) on acrylamide hydrogels biofunctionalized with bovine serum albumin (BSA), demonstrating direct detection of anti-BSA antibodies without markers, optimizing transparency and swelling capacity, achieving detections in sub-mg L¿¹ ranges, and validating the detection of immunoglobulin G (IgG). Chapter 5 introduces slide-ring hydrogels with polyrotaxanes, improving sensitivity and stability, reducing the amount of bioreceptors required, and clinically validating the system with real serum samples, obtaining recoveries between 70-75%. Chapter 6 focuses on the detection of C-reactive protein (CRP), a key biomarker of inflammation and cardiovascular risk, through a hydrogel incorporating phosphorylcholine units and methylated polyrotaxanes, achieving detection limits of 0.3 mg L¿¹ and recoveries between 91-99%, demonstrating high sensitivity and specificity with one-hour assays. Chapter 7 develops volume holographic gratings (VHGs) in biofunctionalized hydrogels through double-beam interference, obtaining portable and stable biosensors, validated at the Centre for Industrial and Engineering Optics of TU Dublin, establishing foundations for future clinical applications. Chapter 8 compares holographic recording methodologies using phase masks and bioreceptor incorporation strategies, demonstrating that dynamic binding through mobile cyclodextrins significantly improves bioreceptor bioavailability and system sensitivity, offering a relevant innovation in the dynamic control of bioactive elements in soft materials. Finally, Chapter 9 summarizes the main conclusions, confirming the successful development of biofunctionalized hydrogels applicable to label-free optical biosensors, characterized by specificity, reproducibility, low cost, and practical feasibility. Overall, the thesis provides a comprehensive journey from theoretical foundations to experimental validation, demonstrating the feasibility of regenerable, adaptive, and portable biosensors for early and personalized diagnosis, opening new perspectives in biomedicine, wearable devices, and primary care technologies., This work was supported by ADBIHOL (PID2019-110713RB-I00) from MINECO and PROMETEO/2020/094 from Generalitat Valenciana. M. I. Lucío acknowledges MINECO for her Juan de la Cierva Incorporación grant (IJC 2018-035355-I). A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València. This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by “ERDF/EU” and PROGRAMA PROMETEO 2024 - CIPROM/2023/18 from Generalitat Valenciana. A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València. This work was supported by project WEAROPSENS PID2022-140653OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by “ERDF/EU” and PROMETEO CIPROM/2023/18. A. Cubells-Gómez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) and the “Ayudas para movilidad de estudiantes de doctorado de la UPV – 2023”. Michael Murray is supported by Research Ireland Grant SFI 20/FFP-P/8851 (LIGHTSHAPE). The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Study of Strategies for Genetic Variant Discrimination and Detection by Optosensing

  • Lázaro Zaragozá, Ana
[ES] La medicina actual se dirige hacia un enfoque más personalizado basándose en el diagnóstico molecular del paciente a través del estudio de biomarcadores específicos. Aplicando este principio molecular, el diagnóstico, pronóstico y selección de la terapia se apoyan en la identificación de variaciones específicas del genoma humano, como variaciones de un único nucleótido (SNV). Para detectar estos biomarcadores se dispone de una amplia oferta de tecnologías. Sin embargo, muchos de los métodos en uso presentan limitaciones como un elevado coste, complejidad, tiempos de análisis largos o requieren de personal y equipamiento especializado, lo que imposibilita su incorporación masiva en la mayoría de los sistemas sanitarios. Por tanto, existe la necesidad de investigar y desarrollar soluciones analíticas que aporten información sobre las variantes genéticas y que se puedan implementar en diferentes escenarios del ámbito de la salud con prestaciones competitivas y económicamente viables. El objetivo principal de esta tesis ha sido desarrollar estrategias innovadoras para resolver el reto de la detección múltiple de variantes genéticas que se encuentran en forma minoritaria en muestras biológicas de pacientes, cubriendo las demandas asociadas al entorno clínico. Las tareas de investigación se centraron en la combinación de reacciones de discriminación alélica con amplificación selectiva de DNA y el desarrollo de sistemas ópticos de detección versátiles. Con el fin de atender el amplio abanico de necesidades, en el primer capítulo, se presentan resultados que mejoran las prestaciones analíticas de la reacción en cadena de la polimerasa (PCR) mediante la incorporación de una etapa al termociclado y de un agente bloqueante amplificando selectivamente las variantes minoritarias que fueron monitorizadas mediante fluorescencia a tiempo real. En el segundo capítulo, se logró la discriminación alélica combinando la ligación de oligonucleótidos con la amplificación de la recombinasa polimerasa (RPA), que al operar a temperatura constante permitió una detección tipo point-of-care (POC). La identificación de SNV se llevó a cabo mediante hibridación en formato micromatriz, utilizando la tecnología Blu-Ray como plataforma de ensayo y detección. En el tercer capítulo, se integró la RPA con la reacción de hibridación alelo especifica en cadena (AS-HCR), en formato array para genotipar SNV a partir de DNA genómico en un chip. La lectura de los resultados se realizó mediante un smartphone. En el último capítulo, se presenta la síntesis de un nuevo reactivo bioluminiscente que se aplicó a la monitorización de biomarcadores de DNA a tiempo real y final de la RPA basada en la transferencia de energía de resonancia de bioluminiscencia (BRET), eliminando la necesidad de una fuente de excitación. Todas las estrategias permitieron un reconocimiento especifico de la variante de interés, incluso en muestras que contenían tan solo 20 copias de DNA genómico diana. Se consiguieron resultados sensibles (límite de detección 0.5% variante/total), reproducibles (desviación estándar relativa < 19%), de manera sencilla (3 etapas o menos), rápida (tiempos cortos de 30-200 min) y permitiendo el análisis simultaneo de varios genes. Como prueba de concepto, estas estrategias se aplicaron a la detección e identificación en muestras clínicas de biomarcadores asociados a cáncer colorrectal y enfermedades cardiológicas. Los resultados se validaron por comparación con los métodos de referencia NGS y PCR, comprobándose que se mejoraban los requerimientos técnicos y la relación coste-eficacia. En conclusión, las investigaciones llevadas a cabo posibilitaron desarrollar herramientas de genotipado con propiedades analíticas competitivas y versátiles, aplicables a diferentes escenarios sanitarios, desde hospitales a entornos con pocos recursos. Estos resultados son prometedores al dar respuesta a la demanda de tecnologías alternativas para el diagnóstico molecular personalizado., [CA] La medicina actual es dirigeix cap a un enfocament més personalitzat basant-se en el diagnòstic molecular del pacient a través de l'estudi de biomarcadors específics. Aplicant aquest principi molecular, el diagnòstic, pronòstic i selecció de la teràpia es recolzen en la identificació de variacions específiques del genoma humà, com variacions d'un únic nucleòtid (SNV). Per a detectar aquests biomarcadors, es disposa d'una àmplia oferta de tecnologies. No obstant això, molts dels mètodes en ús presenten limitacions com un elevat cost, complexitat, temps d'anàlisis llargues o requereixen de personal i equipament especialitzat, la qual cosa impossibilita la seua incorporació massiva en la majoria dels sistemes sanitaris. Per tant, existeix la necessitat d'investigar i desenvolupar solucions analítiques que aporten informació sobre les variants genètiques i que es puguen implementar en diferents escenaris de l'àmbit de la salut amb prestacions competitives i econòmicament viables. L'objectiu principal d'aquesta tesi ha sigut desenvolupar estratègies innovadores per a resoldre el repte de la detecció múltiple de variants genètiques que es troben en forma minoritària en mostres biològiques de pacients, cobrint les demandes associades a l'entorn clínic. Les tasques d'investigació es van centrar en la combinació de reaccions de discriminació al·lèlica amb amplificació selectiva de DNA i al desenvolupament de sistemes òptics de detecció versàtils. Amb la finalitat d'atendre l'ampli ventall de necessitats, en el primer capítol, es presenten resultats que milloren les prestacions analítiques de la reacció en cadena de la polimerasa (PCR) mitjançant la incorporació d'una etapa al termociclat i d'un agent bloquejant amplificant selectivament les variants minoritàries que van ser monitoritzades mitjançant fluorescència a temps real. En el segon capítol, es va aconseguir la discriminació al·lèlica combinant el lligament d'oligonucleòtids amb l'amplificació de la recombinasa polimerasa (RPA), que en operar a temperatura constant va permetre una detecció tipus point-of-care (POC). La identificació de SNV es va dur a terme mitjançant hibridació en format micromatriu, utilitzant la tecnologia Blu-Ray com a plataforma d'assaig i detecció. En el tercer capítol, es va integrar la RPA amb la reacció d'hibridació al·lel específica en cadena (AS-HCR), en format matriu per a genotipar SNV a partir de DNA genòmic en un xip. La lectura dels resultats es va realitzar mitjançant un telèfon intel·ligent. En l'últim capítol, es presenta la síntesi d'un nou reactiu bioluminescent que es va aplicar al monitoratge de biomarcadors de DNA a temps real i final de la RPA basada en la transferència d'energia de ressonància de bioluminescència (BRET), eliminant la necessitat d'una font d'excitació. Totes les estratègies van permetre un reconeixement específic de la variant d'interès, fins i tot en mostres que només contenien 20 còpies de DNA genòmic diana. Es van aconseguir resultats sensibles (límit de detecció 0.5% variant/total), reproduïbles (desviació estàndard relativa < 19%), de manera senzilla (3 etapes o menys), ràpida (temps curts de 30-200 min) i permetent l'anàlisi simultània de diversos gens. Com a prova de concepte, aquestes estratègies es van aplicar a la detecció i identificació en mostres clíniques de biomarcadors associats a càncer colorectal i a malalties cardiològiques. Els resultats es van validar per comparació amb els mètodes de referència NGS i PCR, comprovant-se que es milloraven els requeriments tècnics i la relació cost-eficàcia. En conclusió, les investigacions dutes a terme van possibilitar desenvolupar eines de genotipat amb propietats analítiques competitives i versàtils, aplicables a diferents escenaris sanitaris, des d'hospitals a entorns amb pocs recursos. Aquests resultats són prometedors en donar resposta a la demanda de tecnologies alternatives per al diagnòstic molecular personalitzat., [EN] Current medicine is moving towards a more personalized approach based on the patients' molecular diagnosis through the study of specific biomarkers. Diagnosis, prognosis and therapy selection, applying this molecular principle, rely on identifying specific variations in the human genome, such as single nucleotide variations (SNV). A wide range of technologies is available to detect these biomarkers. However, many of the employed methods have limitations such as high cost, complexity, long analysis times, or requiring specialized personnel and equipment, making their massive incorporation in most healthcare systems impossible. Therefore, there is a need to research and develop analytical solutions that provide information on genetic variants that can be implemented in different health scenarios with competitive and economically feasible performances. The main objective of this thesis has been to develop innovative strategies to solve the challenge of multiple detection of genetic variants that are found in a minority amount in patient samples, covering the demands associated with the clinical setting. Research tasks focused on the combination of allelic discrimination reactions with selective DNA amplification and the development of versatile optical detection systems. In order to meet the wide range of needs, in the first chapter, the analytical performances of the polymerase chain reaction (PCR) were improved by incorporating a thermocycling step and a blocking agent to amplify selectively minority variants that were monitored by real-time fluorescence. In the second chapter, allelic discrimination was achieved by combining oligonucleotide ligation with recombinase polymerase amplification (RPA), which operates at a constant temperature, allowing point-of-care (POC) detection. SNV identification was carried out by hybridization in microarray format, using Blu-Ray technology as the assay platform and detector. RPA was integrated with allele-specific hybridization chain reaction (AS-HCR), in an array format to genotype SNV from genomic DNA on a chip in the third chapter. The reading of the results was performed using a smartphone. In the last chapter, a new bioluminescent reagent was synthesized. It was applied to real-time and endpoint DNA biomarker monitoring based on bioluminescence resonance energy transfer (BRET), eliminating the need for an excitation source. All the strategies allowed specific recognition of the target variant, even in samples containing as few as 20 copies of target genomic DNA. Sensitive (limit of detection 0.5% variant/total), reproducible (relative standard deviation < 19%), simple (3 steps or less), fast (short times of 30-200 min) results were achieved, allowing simultaneous analysis of several genes. As proof of concept, these strategies were applied to detect and identify biomarkers associated with colorectal cancer and cardiological diseases in clinical samples. The results were validated by comparison with reference methods such as NGS and PCR, proving that the technical requirements and cost-effectiveness were improved. In conclusion, the developed research made it possible to develop genotyping tools with competitive analytical properties and versatile, applicable to different healthcare scenarios, from hospitals to limited-resource environments. These results are promising since they respond to the demand for alternative technologies for personalized molecular diagnostics., The authors acknowledge the financial support received from the Generalitat Valenciana PROMETEO/2020/094, GRISOLIA/2014/024 PhD Grant and GVA-FPI-2017 PhD grant, the Spanish Ministry of Economy and Competitiveness MINECO projects CTQ2016-75749-R and PID2019-110713RB-I00 and European Regional Development Fund (ERDF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Biogratings: Diffractive Transducers for Biosensing in Photonic Platforms

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
[ES] El desarrollo científico y tecnológico de las últimas décadas ha dado lugar a sistemas sensores capaces de obtener, procesar y transmitir información sobre multitud de aspectos físicos y químicos, y utilizarla para mejorar aspectos clave de multitud de áreas de nuestra sociedad. Los sensores químicos son dispositivos compactos y miniaturizados capaces de ofrecer soluciones alternativas a las técnicas de análisis instrumental convencionales. En especial, los biosensores han adquirido gran relevancia por los avances que han supuesto para sectores estratégicos como el diagnóstico clínico, la industria alimentaria y el medio ambiente. Los biosensores ópticos se basan en interacciones entre la luz y la materia para transducir eventos de bioreconocimiento y presentan prestaciones importantes como la estabilidad, inmunidad a estímulos externos y versatilidad en el desarrollo de aproximaciones sin marcaje (label-free). Este último aspecto suele aprovechar fenómenos nanoscópicos y su desarrollo se encuentra muy ligado al progreso de la nanociencia y nanotecnología. Un aspecto clave en el biosensado sin marcaje consiste en descubrir y desarrollar nuevas estrategias de transducción. En este sentido, aunque se encuentren aun en una etapa temprana de desarrollo, los biosensores difractivos presentan un gran potencial en términos de simplicidad, miniaturización, y capacidad para minimizar señales no deseadas fruto de interacciones no específicas, entre otros aspectos., [CA] El desenvolupament científic i tecnològic de les últimes dècades ha donat lloc a sistemes sensors capaços d'obtindre, processar i transmetre informació sobre multitud d'aspectes físics i químics, i utilizar-la per a millorar aspectes clau de multitud d'arees de la nostra societat. Els sensors químics són dispositius compactes i miniaturitzats capaços d'oferir solucions alternatives a les tècniques d'analisi instrumental convencionals. Especialment, els biosensors han adquirit gran rellevància pels avanços que han suposat per als sectors estratègics com el diagnòstic clínic, la industria alimentària i el medi ambient. Els biosensors òptics es basen en interaccions entre la llum i la matèria per a transduir esdeveniments de bioreconèixement i presenten prestacions importants com estabilitat, immunitat a estímuls externs i versatilitat en el desenvolupament d'aproximacions sense marcatge (label-free). Aquest últim aspecte sol aprofitat fenòmens nanoscòpics i el seu desenvolupament es troba molt lligat al progrés de la nanociència i nanotecnologia. Un aspecte clau en el biosensat sense marcatge consisteix a descobrir i desenvolupar noves estratègies de transducció. En aquest sentit, encara que es troben fins i tot en una etapa primerenca de desenvolupament, els biosensors difractius presenten un gran potencial en termes de simplicitat, miniaturització, i capacitat per a minimitzar senyals no desitjats fruit d'interaccions no específiques, entre altres aspectes., [EN] The scientific and technological progress in recent decades has given rise to sensor systems capable of obtaining, processing, and transmitting information on a multitude of physical and chemical aspects and using it to improve key aspects of many areas of our society. Chemical sensors are compact, miniaturized devices capable of offering alternative solutions to conventional instrumental analysis techniques. In particular, biosensors have become highly relevant due to the progress they have brought to strategic sectors such as clinical diagnostics, the food industry, and the environment. Optical biosensors rely on interactions between light and matter to transduce biosensing events and provide important features such as stability, immunity to external stimuli, and versatility in the development of label-free approaches. This last aspect usually exploits nanoscopic phenomena and its development in closely linked to the progress in nanoscience and nanotechnology. A key aspect of label-free biosensing is the discovery and development of new transduction strategies. In this regard, although they are at an early stage of development, diffractive biosensors offer great potential in terms of simplicity, miniaturization, and the ability to minimize unwanted signals from non-specific interactions, among other aspects., This work was financially supported by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) co-funded by the European Union “ERDF A way of making Europe” (PID2019-110713RB-I00, TED2021-132584B-C21, PID2019-110877GB-I00), Ministerio de Economía y Competitividad (TEC2016-80385-P), Generalitat Valenciana (PROMETEO/2019/048 PROMETEO/2020/094, PROMETEO/2021/015, IDIFEDER/2021/046). A.J.D. ackowledges the FPI-UPV 2017 grant program. The authors acknowledge Instituto de Microelectrónica de Barcelona CNM-CSIC for the support in the fabrication of the measured chip samples on the Multiproject CNM-VLC silicon nitride technology platform.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nucleotide-selective amplification and array-based detection for identifying multiple somatic mutations

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Martorell-Tejedor, Sara
  • Maquieira, Angel|||0000-0003-4641-4957
  • Lazaro, Ana
[EN] In the context of personalized and cost-effective treatment, knowledge of the mutational status of specific genes is advantageous to predict which patients are responsive to therapies. As an alternative to one-by-one detection or massive sequencing, the presented genotyping tool determines multiple polymorphic sequences that vary a single nucleotide. The biosensing method includes an effective enrichment of mutant variants and selective recognition by colorimetric DNA arrays. The proposed approach is the hybridization between sequence-tailored probes and products from PCR with SuperSelective primers to discriminate specific variants in a single locus. A fluorescence scanner, a documental scanner, or a smartphone captured the chip images to obtain spot intensities. Hence, specific recognition patterns identified any single-nucleotide change in the wild-type sequence over- coming qPCR methods and other array-based approaches. Studied mutational analyses applied to human cell lines provided high discrimination factors, the precision was 95%, and the sensitivity was 1% mutant of total DNA. Also, the methods showed a selective genotyping of the KRAS gene from tumorous samples (tissue and liquid biopsy), corroborating results by NGS. The developed technology supported on low-cost robust chips and optical reading provides an attractive pathway toward implementing fast, cheap, reproducible discrimination of oncological patients., Financial support received from EU FEDER, MINECO Project PID2019-110713RB-I00, and Generalitat Valenciana GVA PROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Holographic Surface Relief Diffraction gratings made of hydrogels for direct label-free biosensing of IgGs

  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] This work describes the development of a label-free (LF) biosensing platform for the direct detection of targets based on diffractive structures fabricated with acrylamide-based hydrogels biofunctionalized with proteins and antibodies. Hydrogels containing Bovine Serum Albumin protein (BSA) with different crosslinking degrees were synthesized and characterized to find the optimal conditions for the suitable fabrication of surface relief gratings (SRGs). The bioavailability of BSA-functionalized hydrogels for the specific recognition of anti-BSA antibodies was verified by fluorescence detection. After the hydrogel-based SRG fabrication, diffraction efficiency measures at two different laser wavelengths were used for the direct LF detection of anti-BSA antibodies. The limit of detection in the sub mg L-1 range was read. Additionally, SRGs were prepared with hydrogels biofunctionalized with anti-rabbit antibodies for the direct detection of IgGs from rabbit serum, obtaining similar analytical performance without the necessity of labeling or applying amplification strategies., This work was supported by project ADBIHOL PID2019-110713RB-I00 funded by MICIU/AEI/10.13039/501100011033, project WEAR-OPSENS PID2022-140653OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU", and PROMETEO/2020/094 from Generalitat Valenciana. M. I. Lucio acknowledges MINECO for her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) . A. Cubells-Gomez acknowledges the FPI-UPV 2022 grant program (PAID-01-22) . The authors acknowledge the assistance and advice from the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Diseño, obtención y caracterización de proteínas recombinantes a partir de determinantes antigénicos asociadas a reacciones alérgicas a ß-lactámicos.

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
[ES] El diagnóstico de alergias a antibióticos ß-lactámicos incluye el uso de pruebas in vivo no satisfactorias ya que consumen mucho tiempo y conllevan el riesgo de provocar una nueva reacción alérgica. Por otro lado, los métodos in vitro basados en la inmunodetección de IgE alérgeno-específica generan una información muy valiosa, confirmando o descartando la alergia y postulándose como una alternativa de diagnóstico segura. A pesar de ello, las pruebas in vitro actuales carecen de sensibilidad y exactitud, con un 81% de falsos negativos, lo que limita su uso diagnóstico. Esto ha desencadenado una creciente demanda de nuevas pruebas in vitro basadas en la inmunodetección de IgE, el biomarcador presente en suero más estudiado en alergia. Sin embargo, la falta de estándares de referencia de IgE alérgeno-específica ha imposibilitado la validación y estandarización de los métodos, lo que hace que los resultados de las distintas pruebas no sean comparables. Además, dicha falta de estándares de referencia hace que las concentraciones de IgE específica se calculen a partir de una curva de calibración de IgE total mediante una interpolación heteróloga, lo que ha demostrado no ser totalmente correcto. Por los motivos mencionados, en esta tesis doctoral se plantea como objetivo principal el diseño, obtención y caracterización de proteínas recombinantes con reactividad frente a antibióticos ß-lactámicos. Esta investigación comienza con la puesta a punto de un inmunoensayo en placa ELISA con detección quimioluminiscente para la cuantificación de IgE específica. El ensayo desarrollado permitió determinar IgE específica por debajo de 0.1 IU/mL (0.24 ng/mL), permitiendo así la identificación de pacientes alérgicos con una mayor sensibilidad, utilizando solo 25 ¿L de muestra (suero). El inmunoensayo mostró una buena sensibilidad (64.6%), así como una excelente especificidad (100%), que mejoran significativamente el carácter predictivo de las pruebas in vitro existentes. A continuación, se abordó la obtención y caracterización de proteínas recombinantes similares a las IgE específicas de los ß-lactámicos utilizando la metodología Phage Display. La primera aproximación se trata de una proteína formada por dos nanoanticuerpos que mimetiza el comportamiento de una IgE específica. De esta manera, se obtuvieron proteínas recombinantes en las que uno de los nanoanticuerpos reconoce selectivamente un determinante antigénico de un antibiótico ß-lactámico, mientras que el otro reconoce específicamente al parátopo de un anticuerpo detector anti-IgE. Estas construcciones resultaron ser estables y funcionales. El papel de estas proteínas recombinantes como calibrador homólogo se estudió determinando la concentración de IgE específica a penicilina G presente en suero mediante un ensayo quimioluminiscente. El método desarrollado duplicaba la sensibilidad clínica (66%) frente al método de referencia (28%), mientras que mantenía una especificidad clínica del 100%. Alcanzado este punto, la tesis se centró en la producción de IgE específica recombinante utilizando como material de partida el ADN de un paciente alérgico a amoxicilina y penicilina G. A partir del material genético aislado, mediante Phage Display, ingeniería de anticuerpos y métodos de expresión en células de insecto se consiguió producir una IgE específica recombinante. De esta manera, se obtuvo un producto biológico que cumple con los requisitos para su adopción como material de referencia en ensayos in vitro. Igualmente, se utilizó como calibrador homólogo para la determinación de IgE específica a amoxicilina. Se alcanzó un límite de detección de 0.05 IU/mL con el que se conseguía un aumento de la sensibilidad clínica (73%) que cuadruplicaba al método de referencia (16%), manteniendo la especificidad clínica en el 100%., [CA] El diagnòstic d'al·lèrgies a antibiòtics ß-lactàmics inclou l'ús de proves in vivo no satisfactòries, ja que consumeixen molt de temps i comporten el risc de provocar una nova reacció al·lèrgica. D'altra banda, els mètodes in vitro basats en la immunodetecció d'IgE al·lergen-específica generen una informació molt valuosa, confirmant o descartant l'al·lèrgia i postulant-se com una alternativa de diagnòstic segura. Tanmateix, a les proves in vitro actuals hi ha una manca de sensibilitat i exactitud, amb un 81% de falsos negatius, cosa que en limita l'ús diagnòstic. Tot això ha desembocat en una demanda creixent de noves proves in vitro basades en la immunodetecció d'IgE, el biomarcador present en sèrum més estudiat en al·lèrgia. No obstant això, la manca d'estàndards de referència d'IgE al·lergen-específica ha impossibilitat la validació i estandardització dels mètodes, cosa que fa que els resultats de les diferents proves no siguen comparables. A més, aquesta manca d'estàndards de referència fa que les concentracions d'IgE específica es calculen a partir d'una corba de calibratge d'IgE total mitjançant una interpolació heteròloga, un mètode que ha demostrat no ser totalment correcte ja que no es pren en consideració la interacció entre el determinant antigènic i la IgE específica. Pels motius mencionats, en aquesta tesi doctoral es planteja com a objectiu principal el disseny, l'obtenció i la caracterització de proteïnes recombinants amb reactivitat davant dels antibiòtics ß-lactàmics. Aquesta investigació comença amb la posada a punt d'un immunoassaig en placa ELISA amb detecció quimioluminiscent per a la quantificació d'IgE específica. L'assaig desenvolupat va permetre determinar IgE específica per baix de 0.1 IU/mL (0.24 ng/mL), el que permet la identificació de pacients al·lèrgics amb més sensibilitat, utilitzant només 25 ¿L de mostra (sèrum). L'immunoassaig mostra una bona sensibilitat (64.6%), així com una excel·lent especificitat (100%), que milloren significativament el caràcter predictiu de les proves in vitro existents. A continuació, es va abordar l'obtenció i la caracterització de proteïnes recombinants similars a les IgE específiques dels ß-lactàmics utilitzant la metodologia Phage Display. La primera aproximació és una proteïna formada per dos nanoanticossos que mimetitza el comportament d'una IgE específica. D'aquesta manera, es van obtenir proteïnes recombinants en què un dels nanoanticossos reconeix selectivament un determinant antigènic d'un antibiòtic ß-lactàmic, mentre que l'altre reconeix específicament el paràtop d'un anticòs detector anti-IgE (Omalizumab). Aquestes construccions van resultar estables i funcionals. El paper d'aquestes proteïnes recombinants com a calibrador homòleg es va estudiar determinant la concentració d'IgE específica a penicil·lina G present en sèrum mitjançant un assaig quimioluminiscent. El mètode desenvolupat duplicava la sensibilitat clínica (66%) respecte del mètode de referència (28%), mentre que mantenia una especificitat clínica del 100%. Assolit aquest punt, la tesi es va centrar en la producció d'IgE específica recombinant utilitzant com a material de partida l'ADN d'un pacient al·lèrgic a amoxicil·lina i penicil·lina G. En combinació amb la metodologia Phage Display, enginyeria d'anticossos i mètodes d'expressió en cèl·lules d'insecte, es va aconseguir produir una IgE específica recombinant. D'aquesta manera, es va obtenir un producte biològic que compleix els requisits per ser adoptat com a material de referència en assajos in vitro. Igualment, es va utilitzar com a calibrador homòleg per a la determinació d'IgE específica a amoxicil·lina. Es va assolir un límit de detecció de 0.05 IU/mL amb què s'aconseguia un augment de la sensibilitat clínica (73%) que quadriplicava al mètode de referència (16%), mantenint l'especificitat clínica al 100%., [EN] The diagnosis of ß-lactam antibiotics allergy involves using unsatisfactory in vivo tests that are time-consuming and carry the risk of triggering a new allergic reaction. On the other hand, in vitro methods based on allergen-specific IgE immunodetection generate precious information, confirming or ruling out allergies and postulating themselves as a safe diagnostic alternative. Despite this, current in vitro tests lack sensitivity and accuracy, with 81% false negatives limiting their diagnostic use. This has led to a growing demand for new in vitro tests based on the immunodetection of IgE, the most studied biomarker in serum allergy. However, the lack of reference standards for allergen-specific IgE has made it impossible to validate and standardize methods, which means that the results of the different tests are not comparable. Furthermore, this lack of reference standards means that specific IgE concentrations are calculated from a total IgE calibration curve by heterologous interpolation, which has been shown not to be entirely correct. For the reasons mentioned above, the main objective of this doctoral thesis is to design, obtain and characterize recombinant proteins with reactivity against ß-lactam antibiotics. This research begins with developing an ELISA immunoassay with chemiluminescent detection for quantifying specific IgE. The assay developed allowed the determination of specific IgE below 0.1 IU/mL (0.24 ng/mL), thus allowing the identification of allergic patients with greater sensitivity, using only 25 µL of sample (serum). The immunoassay showed good sensitivity (64.6%) and excellent specificity (100%), significantly improving the predictive character of existing in vitro tests. Next, the obtaining and characterizing recombinant proteins similar to ß-lactam-specific IgE was approached using the Phage Display methodology. The first approach deals with a protein consisting of two single-domain antibodies that mimics the behavior of a specific IgE. In this way, recombinant proteins were obtained in which one of the nanobodies selectively recognizes an antigenic determinant of a ß-lactam antibiotic, while the other specifically recognizes the paratope of an anti-IgE detector antibody. These constructs were found to be stable and functional. The role of these recombinant proteins as a homologous calibrator was studied by determining the concentration of penicillin G-specific IgE present in serum by employing a chemiluminescent assay. The developed method doubled the clinical sensitivity (66%) compared to the reference method (28%), while maintaining a clinical specificity of 100%. At this point, the thesis focused on the production of recombinant specific IgE using as starting material the DNA of a patient allergic to amoxicillin and penicillin G. in combination with the Phage Display, antibody engineering and expression methods in insect cells, a recombinant-specific IgE was produced. In this way, a biological product was obtained that meets the requirements for its adoption as reference material in in vitro assays. Likewise, it was used as a homologous calibrator for the determination of specific IgE to amoxicillin. A detection limit of 0.05 IU/mL was achieved, which increased clinical sensitivity (73%) fourfold compared to the reference method (16%), while maintaining clinical specificity at 100%., This work was supported by CSIC 2007-348, ANII FMV 2019_156321, and ANII FMV 2018_148245. P.Q.-C. acknowledges financial support from Generalitat Valenciana through the research staff training program (GVA ACIF/2018/173). This research was also funded by Agencia Estatal de Investigación (PID2019-110713RB-I00, FEDER), program UPV-La FE 2019 (P105 VALBIOAL), and PROMETEO/ 2020/094
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing stable lead halide perovskite nanocrystals: From a single particle to nanocomposites

  • Collantes-Pablo, Cynthia
  • Teixeira, William|||0000-0002-6729-9508
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Metal halide perovskite nanocrystals have attracted substantial interest given their easy manufacturing, superior Photoluminiscence Quantum Yield and striking optical properties. Despite the huge potential of such materials, their practical implementation and future technological applications need to overcome stability drawbacks: spontaneous degradation, which is accelerated by external stressors (i.e., moisture, oxygen, heat, light, and their combinations), poor phase stability and loss of their colloidal stability due to ligand lability. Within this framework, the understanding of their surface chemistry features and ligand-binding patterns plays a key role in improving the robustness and stability of perovskite nanocrystals. This review presents a comprehensive study of state-of-the-art and current challenges in surface chemistry, interface engineering and encapsulation methodologies for stabilizing lead halide perovskite nanoparticles. We first introduced lead halide perovskite structural and optical properties and a brief discussion of synthesis methods. Next, we explored recent developments in encapsulation methods in different protective matrices comprising from core-shell to macroscale nanocomposites. We also analyzed the advantages and shortcomings of each approach according to their final applications. Finally, we concluded with a discussion of open research challenges and future directions in the aforementioned aspects., This work was financially supported by EU FEDER Project ADBIHOL/AEI/10.13039/501100011033 from MCIN/AEI and PROMETEO/2020/094 from the Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship) . W.T acknowledges financial support for Ph.D studies (FPI-UPV 2019 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A 3D-printed hollow microneedle-based electrochemical sensing device for in situ plant health monitoring

  • Parrilla, Marc
  • Sena-Torralba, Amadeo
  • Steijlen, Annemarijn
  • De Wael, Karolien
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Plant health monitoring is devised as a new concept to elucidate in situ physiological processes. The need for increased food production to nourish the growing global population is inconsistent with the dramatic impact of climate change, which hinders crop health and exacerbates plant stress. In this context, wearable sensors play a crucial role in assessing plant stress. Herein, we present a low-cost 3D-printed hollow microneedle array (HMA) patch as a sampling device coupled with biosensors based on screen-printing technology, leading to affordable analysis of biomarkers in the plant fluid of a leaf. First, a refinement of the 3D-printing method showed a tip diameter of 25.9 +/- 3.7 mu m with a side hole diameter on the microneedle of 228.2 +/- 18.6 mu m using an affordable 3D printer (<500 EUR). Notably, the HMA patch withstanded the forces exerted by thumb pressing (i.e. 20-40 N). Subsequently, the holes of the HMA enabled the fluid extraction tested in vitro and in vivo in plant leaves (i.e. 13.5 +/- 1.1 mu L). A paper-based sampling strategy adapted to the HMA allowed the collection of plant fluid. Finally, integrating the sampling device onto biosensors facilitated the in situ electrochemical analysis of plant health biomarkers (i.e. H2O2, glucose, and pH) and the electrochemical profiling of plants in five plant species. Overall, this electrochemical platform advances precise and versatile sensors for plant health monitoring. The wearable device can potentially improve precision farming practices, addressing the critical need for sustainable and resilient agriculture in changing environmental conditions., M.P. acknowledges the support of the Fund for Scientific Research (FWO) in Flanders (1265223N), Belgium. A.S.T. acknowledges Generalitat Valenciana and the European Social Fund for the CIAPOS fellowship (CIAPOS/2022/7) and the Fund for Scientific Reseach (FWO) in Flanders (V510323N). A.S recognizes support through a Rubicon fellowship from the Dutch Research Council (019.223EN.003). S.M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by "ERDF A way of making Europe". The research was financed by the AGROALNEXT/2022/054 grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat Valenciana, Spain), and MCIN, Next Generation EU (PRTR-C17.I1) funds. The authors acknowledge BOF-UAntwerp and FWO infrastructure funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monodispersed CsPb2Br5@SiO2 Core-Shell Nanoparticles as Luminescent Labels for Biosensing

  • Collantes-Pablo, Cynthia
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Despite the rising advances in the field of metal halide perovskite nanocrystals (NCs), the exploitation of such nanoparticles as luminescent labels for ex vivo imaging and biosensing is still unclear and in the early stages of investigation. One of the major challenges toward the implementation of metal halide perovskite NCs in biosensing applications is to produce monodispersed nanoparticles with desired surface characteristics and compatible with aqueous environments. Here, we report the synthesis of monodispersed spherical CsPb2Br5@SiO2 core-shell nanoparticles by post-synthetic chemical transformation of 3D CsPbBr3 NCs in the presence of tetraethyl orthosilicate and a critical water/ammonia ratio. This method involves an ammoniamediated and ammonia-induced "top-down" transformation of as-synthesized 3D CsPbBr3 NCs to smaller CsPb2Br5 nanoclusters (ca. 2-3 nm), which trigger a seed-mediated silica growth, yielding monodispersed spherical blue luminescent (lambda(emission) = 432 nm) CsPb2Br5@SiO2 perovskite nanoparticles. By adjusting the reaction conditions, core-shell nanoparticles of a 36.1 +/- 4.5 nm diameter, which preserve their optical properties in water, were obtained. Besides that, the viability of the developed nanoparticles as a luminescent label for biosensing has been proven by specific biorecognition of the IgG protein in a direct immunoassay. Our work sheds light on the chemical processes and transformations involved in the silica nucleation mechanism in the presence of perovskite nanoparticles and opens the way for the future rational design of the next generation of semiconductor NC luminescent biological labels, This work was financially supported by the E.U FEDER projects BiHolog CTQ2016-75749-R and ADBIHOL (PID2019110713RB-I00) from MINECO and PROMETEO/2020/094 from Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship). V.G-P. thanks Universitat Polite`cnica de Vale`ncia for her postdoctoral fellowship (Grant-PAID-10-14) and for financial support from the project PAID/16/18 (VIITUPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple recombinase polymerase amplification and low-cost array technology for the screening of genetically modified organisms

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The identification of different transgenic products that are potentially present in foods is a priority given their impact on environmental safeness and health care. In this context, reliable, fast and inexpensive detection methods are demanded to screen the compliance of product labelling and traceability regulations. We herein developed a method that combines recombinase polymerase amplification (RPA) in a multiple format and a hybridisation assay. This system was optimised for the simultaneous amplification/detection of the 35S promoter, the NOS terminator and taxa, soya (Glycine max), corn (Zea mays) and potato (Solanum tuberosum), to denote the transgenic ingredients present in samples and to help to identify their source. As proof-of-concept, compact disc technology automated the optical sensing of RPA products. Discs worked as an analytical platform in the microarray format, and the reader/recorder as a detector. The analysis of the food mixtures containing genetically modified organisms up to 0.2 % showed excellent selectivity (no false-positives), reproducibility (relative error <20 %) and sensitivity (0.04 ng). The isothermal method was validated using certified reference materials and successfully compared to PCR-ELISA. The results of food products also confirmed it as an effective high-throughput tool for supporting simple, low-cost food safety controls, which makes it ideal for laboratories with limited resources., MINECO Project PID2019-110713RB-I00 and GVAPROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smartphone-based lateral flow immunoassay for sensitive determination of Lactate Dehydrogenase at the point of care

  • Banguera-Ordoñez, Yulieth Deifan
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Sena-Torralba, Amadeo
[EN] Lactate dehydrogenase (LDH), a prevalent enzyme involved in anaerobic glycolysis, is released into body fluids following cell damage and has long been a general marker of tissue injury. However, due to its lack of selectivity and the advent of more accurate biomarkers, the clinical utility of LDH has been largely limited to confirming hemolysis. LDH has been recognized as a valuable prognostic biomarker for various cancers, making its monitoring crucial during cancer management. Traditional LDH methods include spectrophotometric analysis of NADH at 340 nm, native electrophoresis, or enzyme-linked immunosorbent assay. This study presents the first lateral flow immunoassay (LFIA) for the smartphone-based quantification of serum LDH levels at the point of care. Highly-affinity and specific antibodies have been produced, with 5 nM equilibrium dissociation constant and no cross-reactivity with human serum albumin and human immunoglobulin G. Utilizing carbon nanoparticles as signal transducers significantly enhanced the quantification limit 55-fold, compared to the conventional gold nanoparticles-based LFIA, achieving a quantification limit of 1.5 ng mL¿ 1 . The developed assay demonstrated a mean recovery rate of 115 ± 21 % when evaluating LDH-spiked serum samples. This method can be an interesting home-testing tool for monitoring cancer progression or therapy effectiveness., Y.D.B.O. acknowledges the financial support of the Ministerio de Ciencia Tecnología e Innovacion Scholarship Program No. 8852 of Colombia. A.S. acknowledges Generalitat Valenciana and the European Social Fund for the CIAPOS fellowship (CIAPOS/2022/7). S.M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplexed analytical approaches to beta-lactam allergy in vitro testing standardization

  • Juárez-Rodríguez, María José
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] The suspicion of beta-lactam allergy directly contributes to the prescription of antibiotics that diverge from the guidelines, increasing antimicrobial resistance, one of the biggest threats to global health. In vitro quantification of specific IgE is very useful for monitoring allergy, as it confirms or rules out immediate beta-lactam drug allergy and helps find safe alternative antibiotic stewardship. However, reliable in vitro quantification of specific IgE to beta-lactam antibiotics by immunoassay is challenging because of the difficulty of having selective immunoreagents, mainly beta-lactam antigens, and its low concentration levels in serum. Thus, reliable and sensitive in vitro tests for multiplex detection of allergy to different beta-lactam antibiotics is currently essential for clinical diagnosis. Nevertheless, the lack of standardization of quantitative in vitro methods makes the comparison and interpretation of the results difficult. Here, as proof of concept, we report an improved multiplex microimmunoassay for beta-lactam allergy in vitro testing standardization. The results revealed that homologous calibration allows reliable quantification of specific IgE in human serum at very low concentrations (144 ng L-1). Moreover, the reproducibility of the results increases 2-fold using an internal standard, achieving accurate quantitative information: 93% and 106% recovery for penicillin and amoxicillin, respectively. We simultaneously evaluated the reliability of the improved multiplexed in vitro method in a cohort of 40 human serum samples and achieved excellent agreement (0.99) with a currently used in vitro test., M.J.J acknowledges financial support from the FPIprogram from Universitat Politecnica de Valencia. This research was supported by the H2020 program (project COBIOPHAD, grant agreement No. 688448) , being an initiative of the Photonics Public Private Partnership; Agencia Estatal de Investigacian (PID2019-110713RB-I0 0, FEDER) ; program UPVLa FE 2019 (P105 VALBIOAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biogratings: nanoestructuras de biomoléculas para análisis químico mediante difracción de luz

  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
[ES] La química analítica es una ciencia dinámica que integra multitud de disciplinas. Desde hace algún tiempo, parte del progreso de la química analítica es fruto de la convergencia entre diferentes campos. Entre otros, el uso de biomacromoléculas con fines analíticos proporciona una selectividad excelente, y la implementación de nanomateriales permite utilizar fenómenos fotónicos de transducción que favorecen el desarrollo de biosensores. 1,2 En los últimos años parte de las actividades de nuestro grupo de investigación se enmarcan en este contexto.3¿6 En particular, esta comunicación se centra en una estrategia especialmente interesante que hemos denominado con el término biogratings. Llamamos biograting a una capa de biomacromoléculas (proteínas, ácidos nucleicos, etc.) inmovilizadas sobre una superficie sólida y estructurada según un patrón periódico diseñado para difractar la luz incidente. En otras palabras, son nanoestructuras difractivas de biomoléculas sobre sustratos sólidos. La Figura 1 muestra una configuración típica de biograting constituido por un patrón de líneas de proteínas inmovilizadas (strips) y líneas vacías (gaps) dispuestas de forma periódica. El interés analítico de estas nanoestructuras reside en que son capaces de aprovechar la difracción de la luz para transformar interacciones biorreceptoranalito en señales ópticas fácilmente medibles. Entre otras capacidades que se discutirán a continuación, cabe destacar el poder realizar ensayos de biorreconocimiento sin marcaje y a tiempo real, para el análisis directo de muestras complejas. Esta comunicación expone las características de los biogratings y los aspectos clave en su desarrollo: fabricación, estrategias de transducción posibles, y su aplicación en biosensado., Esta publicación es parte del proyecto de I+D+i PID2019-110713RB-I00 financiado por MCIN/AEI/10.13039/501100011033 y FEDER Una manera de hacer Europa , y del proyecto PROMETEO/2020/094 financiado por la Generalitat Valenciana. Financiado con Ayuda a Primeros Proyectos de Investigación (PAID-06-22), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Denaturing for Nanoarchitectonics: Local and Periodic UV-Laser Photodeactivation of Protein Biolayers to Create Functional Patterns for Biosensing

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Maquieira, Angel|||0000-0003-4641-4957
  • Delgado-Pinar, Martina
  • Fernández-Sánchez, María Estrella
  • Cruz, José Luis
  • Andrés, Miguel V.
[EN] The nanostructuration of biolayers has become a paradigm for exploiting nanoscopic light-matter phenomena for biosensing, among other biomedical purposes. In this work, we present a photopatterning method to create periodic structures of biomacromolecules based on a local and periodic mild denaturation of protein biolayers mediated by UV-laser irradiation. These nanostructures are constituted by a periodic modulation of the protein activity, so they are free of topographic and compositional changes along the pattern. Herein, we introduce the approach, explore the patterning parameters, characterize the resulting structures, and assess their overall homogeneity. This UV-based patterning principle has proven to be an easy, cost-effective, and fast way to fabricate large areas of homogeneous one-dimensional protein patterns (2 min, 15 x 1.2 mm, relative standard deviation ? 16%). This work also investigates the implementation of these protein patterns as transducers for diffractive biosensing. Using a model immunoassay, these patterns have demonstrated negligible signal contributions from non-specific bindings and comparable experimental limits of detection in buffer media and in human serum (53 and 36 ng & BULL;mL-1 of unlabeled IgG, respectively)., This work was financially supported by the Ministerio de Ciencia e Innovacion/Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) , co-funded by the European Union "ERDF A way of making Europe", under grants PID2019-110713RB-I00 and PDI2019-104276RB-I00, and Generalitat Valenciana (PROMETEO/2020/094 and PROMETEO/2019/048) . A.J.-D. acknowledges the FPI-UPV 2017 grant program. The authors thank Angel Lopez Munoz for the construction of the scanning system.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface coupling of oligo-functionalized dendrimers to detect DNA mutations after blocked isothermal amplification

  • Martorell-Tejedor, Sara
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] This study presents a useful strategy for the bioconjugation of probes for developing high-performance versatile chips applied to fast-response, low-cost DNA biosensing. We herein demonstrate that the high-density immobilization of dendrimer-oligonucleotide hybrids promotes the reliable sensitive sensing of single-nucleotide variants despite their low concentration. Carboxyl-terminated poly(amidoamine) dendrimers directly coupled to amine-derivatized oligonucleotides were anchored to the activated surfaces of thermoplastics (polycarbonate and cycloolefin polymer). Surface characterization techniques and hybridization assays reported that the multiple functional sites of the oligofunctionalized dendrimer facilitated the efficient immobilization of probes and the sensitive capture of DNA targets (5 pM detection limit). Array performance was better than that of the surfaces functionalized with linear crosslinkers, such as vinyltriethoxysilane or 3-(triethoxysilyl)propyl isocyanate, as well films with unconjugated dendrimer molecules. Based on oligo-dendrimers hybrids, disposable DNA-based biosensing platforms were developed for point-ofcare diagnostics. A selective high-sensitive hybridization assay was performed that included amplification products of blocked PCR and recombinase polymerase amplification (RPA) as an isothermal reaction. The chip results indicated that the single-nucleotide mutant variant of the BRAF oncogene was correctly discriminated in colorectal tissues from cancer patients., The authors acknowledge the financial support received from EU FEDER, the Spanish Ministry of Economy and Competitiveness (PID2019-110713RB-I00 and Technical Support Personnel PTA-2016) and Generalitat Valenciana (PROMETEO/2020/094).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bispecific Single-Domain Antibodies as Highly Standardized Synthetic Calibrators for Immunodiagnosis

  • Segovia-de los Santos, Paula
  • Echaides, Cesar
  • Lassabe, Gabriel
  • Gonzalez-Sapienza, Gualberto
  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Commonly, serological immunoassays and diagnostic kits include reference standard reagents (calibrators) that contain specific antibodies to be measured, which are used for the quantification of unknown antibodies present in the sample. However, in some cases, such as the diagnosis of allergies or autoimmune diseases, it is often difficult to have sufficient quantities of these reference standards, and there are limitations to their lot-to-lot reproducibility and standardization over time. To overcome this difficulty, this study introduces the use of surrogate recombinant calibrators formulated on the basis of two single-domain antibodies (nanobodies) combined through a short peptide linker to produce a recombinant bispecific construct. One of the nanobodies binds to the cognate analyte of the target antibody and the second is specific for the paratope of the secondary detecting antibody. The bispecific nanobody inherits the outstanding properties of stability and low-cost production by bacterial fermentation of the parent nanobodies, and once calibrated against the biological reference standard, it can be reproduced indefinitely from its sequence in a highly standardized manner. As a proof of concept, we present the generation and characterization of two bispecific calibrators with potential application for the diagnosis of allergy against the antibiotics aztreonam and amoxicillin in humans., This work was supported by CSIC 2007-348, ANII FMV 2019_156321, and ANII FMV 2018_148245. P.S. is a recipient of a scholarship from ANII-Uruguay. P.Q.-C. acknowledges financial support from Generalitat Valenciana through the research staff training program (GVA ACIF/2018/173) . This research was also funded by Agencia Estatal de Investigacion (PID2019-110713RB-I00, FEDER) , program UPV-La FE 2019 (P105 VALBIOAL) , and PROMETEO/2020/094.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Holographic biosensors made of DNA-functionalised hydrogels for in vitro diagnostic

  • Zezza, Paola
[ES] La tesis doctoral se centra en el desarrollo de un hidrogel sensible a analitos, funcionalizado con sondas de ADN, con estructura difractiva como transductor óptico para aplicaciones de diagnóstico in vitro. El primer capítulo incluye una visión general de los diferentes conceptos relacionados con el biosensado, los desarrollos recientes en el mercado del diagnóstico in vitro y, en particular, los biosensores de ADN. Además, se presenta la síntesis y caracterización de hidrogeles, su papel como matriz de soporte en biosensado y las estrategias de inmovilización. Por último, se explican los conceptos básicos de la holografía como nueva estrategia de detección y el papel de las diferentes redes de difracción en la biosensación. A continuación, en el Capítulo 2, se discuten los objetivos de este proyecto. El objetivo de esta investigación es desarrollar hidrogeles que incorporen sondas de ADN y dotarlas de una estructura difractiva para que actúen como transductores ópticos sin etiquetas. Se consideran dos tipos de estructuras difractivas: redes holográficas de relieve superficial (SRG) y redes de transmisión de volumen (VTG). La fase inicial de este trabajo se centró en la optimización de hidrogeles, ajustando su composición para que actuaran como biosensores holográficos. Se seleccionaron acrilamida y bisacrilamida para la preparación del hidrogel mediante reacción de polimerización por radicales libres. Además, para introducir la respuesta del analito en la red de hidrogeles 3D, hubo que investigar y poner a punto diferentes estrategias de inmovilización de biorreceptores. En el capítulo 3, la estrategia optimizada consiste en incorporar directamente sondas de ADN modificadas con acridita mediante copolimerización con monómeros de acrilamida durante la formación del hidrogel. Los hidrogeles funcionalizados con ADN se caracterizaron mediante imágenes de fluorescencia y se exploró su versatilidad mediante la fabricación de microarrays. Por último, el hidrogel optimizado sensible a los analitos se utilizó como plataforma para la preparación de SRG. El capítulo 4 describe otro enfoque adoptado para la funcionalización del hidrogel con sondas de ADN. Se añadió un comonómero de acrilato de propargilo al hidrogel de acrilamida, con el fin de introducir la presencia de residuos alcínicos y facilitar una mayor incorporación de las sondas de ADN. Las sondas de ADN utilizadas tenían grupos terminales tiol y se incorporaron mediante química de clic tiol-eno/tiol-yo, debido a la presencia de enlaces C-C dobles y triples. Con esta estrategia, se demostraron dos enfoques de inmovilización de sondas de ADN: durante y después de la síntesis del hidrogel. Los resultados preliminares mostraron que los SRGs tienen potencial para detectar directamente la hibridación de oligonucleótidos en un formato libre de etiquetas. En el capítulo 5, se optimizó el proceso de grabación de VTGs no inclinados en capas de hidrogel para mejorar el rendimiento del transductor. Tras una cuidadosa evaluación de los parámetros de grabación holográfica, las composiciones de las soluciones de incubación y los tiempos de incubación, las estructuras VTG se grabaron con una buena reproducibilidad, logrando una excelente eficiencia de difracción. Además, se estudió su estabilidad en agua para bioensayos. Por último, se observó que los VTG, modificados con oligonucleótidos, respondían selectivamente hibridándose sólo con la diana complementaria, a la vez que conservaban sus propiedades de difracción. El trabajo de investigación demostró la viabilidad de utilizar redes difractivas en capas de hidrogel como biosensores libres de etiquetas, capaces de detectar sondas de ADN, complementarias a la secuencia inmovilizada, en un medio acuoso. Por último, en el capítulo 6, se analizan comparativamente el rendimiento y la aplicabilidad de los distintos enfoques estudiados y se discuten las perspectivas futuras de los hidrogeles de ácidos nucleicos para la detección holográfica., [CA] La tesi doctoral se centra en el desenvolupament d'un hidrogel sensible a anàlits, funcionalitzat amb sondes d'ADN, amb estructura difractiva com a transductor òptic per a aplicacions de diagnòstic in vitro. El primer capítol inclou una visió general dels diferents conceptes relacionats amb el biosensado, els desenvolupaments recents en el mercat del diagnòstic in vitro i, en particular, els biosensores d'ADN. A més, es presenta la síntesi i caracterització d'hidrogels, el seu paper com a matriu de suport en biosensado i les estratègies d'immobilització. Finalment, s'expliquen els conceptes bàsics de l'holografia com a nova estratègia de detecció i el paper de les diferents xarxes de difracció en la biosensación. A continuació, en el Capítol 2, es discuteixen els objectius d'este projecte. L'objectiu d'esta investigació és desenvolupar hidrogels que incorporen sondes d'ADN i dotar-les d'una estructura difractiva perquè actuen com a transductors òptics sense etiquetes. Es consideren dos tipus d'estructures difractivas: xarxes hologràfiques de relleu superficial (SRG) i xarxes de transmissió de volum (VTG). La fase inicial d'este treball es va centrar en l'optimització d'hidrogels, ajustant la seua composició perquè actuaren com biosensores hologràfics. Es van seleccionar acrilamida I bisacrilamida per a la preparació de l'hidrogel mitjançant reacció de polimerització per radicals lliures. A més, per a introduir la resposta de l'anàlit en la xarxa d'hidrogels 3D, va caldre investigar i posar a punt diferents estratègies d'immobilització de biorreceptores. En el capítol 3, l'estratègia optimitzada consisteix a incorporar directament sondes d'ADN modificades amb acridita mitjançant copolimerización amb monòmers d'acrilamida durant la formació de l'hidrogel. Els hidrogels funcionalitzats amb ADN es van caracteritzar mitjançant imatges de fluorescència i es va explorar la seua versatilitat mitjançant la fabricació de bioxips. Finalment, l'hidrogel optimitzat sensible als anàlits es va utilitzar com a plataforma per a la preparació de SRG. El capítol 4 descriu un altre enfocament adoptat per a la funcionalització de l'hidrogel amb sondes d'ADN. Es va afegir un comonómero de acrilato de propargilo a l'hidrogel d'acrilamida, amb la finalitat d'introduir la presència de residus alcínicos i facilitar una major incorporació de les sondes d'ADN. Les sondes d'ADN utilitzades tenien grups terminals tiol i es van incorporar mitjançant química de clic tiol-eno/tiol-ino, a causa de la presència d'enllaços C-C dobles i triples. Amb esta estratègia, es van demostrar dos enfocaments d'immobilització de sondes d'ADN: durant i després de la síntesi de l'hidrogel. Els resultats preliminars van mostrar que els SRGs tenen potencial per a detectar directament la hibridació de oligonucleótidos en un format lliure d'etiquetes. En el capítol 5, es va optimitzar el procés de gravació de VTGs no inclinats en capes d'hidrogel per a millorar el rendiment del transductor. Després d'una acurada avaluació dels paràmetres de gravació hologràfica, les composicions de les solucions d'incubació i els temps d'incubació, les estructures VTG es van gravar amb una bona reproducibilidad, aconseguint una excel·lent eficiència de difracció. A més, es va estudiar la seua estabilitat en aigua per a bioensayos. Finalment, es va observar que els VTG, modificats amb oligonucleótidos, responien selectivament hibridant-se només amb la diana complementària, alhora que conservaven les seues propietats de difracció. El treball de recerca va demostrar la viabilitat d'utilitzar xarxes difractivas en capes d'hidrogel com biosensores lliures d'etiquetes, capaces de detectar sondes d'ADN, complementàries a la seqüència immobilitzada, en un medi aquós. Finalment, en el capítol 6, s'analitzen comparativament el rendiment i l'aplicabilitat dels diferents enfocaments estudiats i es discuteixen les perspectives futures dels hidrogels d'àcids nucleics per a la detecció hologràfica., [EN] The PhD thesis focuses on the development of an analyte-sensitive hydrogel, functionalised with DNA probes, with a diffractive structure as an optical transducer for in vitro diagnostic applications. The first chapter includes an overview of the different concepts related to biosensing, recent developments in the in vitro diagnostics market and, in particular, DNA biosensors. Furthermore, the synthesis and characterisation of hydrogels, their role as a support matrix in biosensing and immobilisation strategies are presented. Finally, the basic concepts of holography as a new detection strategy and the role of different diffraction gratings in biosensing are explained. Then, in Chapter 2, the objectives of this project are discussed. The aim of this research is to develop hydrogels that incorporate DNA probes and provide them with a diffractive structure to act as label-free optical transducers. Two types of diffractive structures are considered: surface-relief holographic gratings (SRGs) and volume transmission gratings (VTGs). The initial phase of this work focused on the optimisation of hydrogels, adjusting their composition to act as holographic biosensors. Acrylamide and bisacrylamide were selected for hydrogel preparation by free radical polymerisation reaction. Furthermore, in order to introduce the analyte response into the 3D hydrogel network, different bioreceptor immobilisation strategies had to be investigated and fine-tuned. In chapter 3, the optimised strategy is to directly incorporate acridite-modified DNA probes by copolymerisation with acrylamide monomers during hydrogel formation. The DNA-functionalised hydrogels were characterised by fluorescence imaging and their versatility was explored by microarray fabrication. Finally, the optimised analyte-responsive hydrogel was used as a platform for SRG preparation. Chapter 4 describes another approach adopted for functionalisation of the hydrogel with DNA probes. A propargyl acrylate comonomer was added to the acrylamide hydrogel in order to introduce the presence of alkyl residues and facilitate further incorporation of the DNA probes. The DNA probes used had thiol end-groups and were incorporated by thiol-ene/thiol-yo click chemistry, due to the presence of double and triple C-C bonds. With this strategy, two approaches to DNA probe immobilisation were demonstrated: during and after hydrogel synthesis. Preliminary results showed that SRGs have the potential to directly detect oligonucleotide hybridisation in a label-free format. In chapter 5, the recording process of unslanted VTGs in hydrogel layers was optimised to improve transducer performance. After careful evaluation of holographic recording parameters, incubation solution compositions and incubation times, the VTG structures were recorded with good reproducibility, achieving excellent diffraction efficiency. In addition, their stability in water for bioassays was studied. Finally, oligonucleotide-modified VTGs were found to respond selectively by hybridising only to the complementary target, while retaining their diffraction properties. The research work demonstrated the feasibility of using diffractive networks in hydrogel layers as label-free biosensors, capable of detecting DNA probes, complementary to the immobilised sequence, in an aqueous medium. Finally, in chapter 6, the performance and applicability of the different approaches studied are comparatively analysed and future prospects of nucleic acid hydrogels for holographic detection are discussed., I would like to acknowledge the government of Valencia to for the PhD fellowship “Santiago Grisolia” and the BEFPI/2022 grant for a 4-months doctoral stay and also the Spanish Ministry of Economy and Competitiveness MINECO (ADBIHOL national project) for their financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An ultra-sensitive homologous chemiluminescence immunoassay to tackle penicillin allergy

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Segovia-de los Santos, Paula
  • Ibáñez-Echevarría, Ethel
  • Hernández-Fernández de Rojas, Dolores
  • Casino, Patricia
  • Lassabe, Gabriel
  • Gonzalez-Sapienza, Gualberto
[EN] Penicillin is one of the most widely used antibiotics to treat bacterial infections in clinical practice. The antibiotic undergoes degradation under physiological conditions to produce reactive compounds that in vivo bind self- proteins. These conjugates might elicit an immune response and trigger allergic reactions challenging to di- agnose due to the complex immunogenicity. Penicillin allergy delabeling initiatives are now part of antibiotic stewardship programs and include the use of invasive and risky in vivo tests. Instead, the in vitro quantification of specific IgE is highly useful to confirm immediate allergy to penicillins. However, discrepant results associated with the low sensitivity and accuracy of penicillin allergy in vitro tests have limited their routine diagnostic use for delabeling purposes. We aimed to develop a homologous chemiluminescence-based immunochemical method for the reliable determination of specific IgE to penicillin G, using unprecedented synthetic human-like Analytica Chimica Acta 1214 (2022) 339940 2standards. The synthetic standard targets the major antigenic determinant of penicillin G and the paratope of Omalizumab, acting as human-like specific IgE. It is a potent calibrator, highly stable, easy, and inexpensive to produce, overcoming the limitations of the pooled human serum preparations. The developed method achieved a good agreement and strong positive relationship, reaching a detection limit below 0.1 IU mL, P.Q-C acknowledges financial support from Generalitat Valenciana through the research staff-training program (GVA ACIF/2018/173). P.C. awards grants Ramon y Cajal and PID2019-110630 GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe¿. S.M awards grants PID2019-110713RB-I00 funded by MCIN/ AEI/10.13039/501100011033 and by ERDF A way of making Europe. PROMETEO/2020/094 funded by Generalitat Valenciana, and program UPV-La FE 2019 (P105 VALBIOAL), FMV-ANII 148245, FMV-ANIII 156321 funded by Agencia Nacional de Investigacion and CSIC 2007- 348 UdelaR, Uruguay, are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Processing of Holographic Hydrogels in Liquid Media: A Study by High-Performance Liquid Chromatography and Diffraction Efficiency

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Zezza, Paola
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The storage of time-stable holographic gratings in hydrogel matrices when the material is immersed in aqueous media is a real challenge at present. The optimization of the storage stages of the holograms must be properly investigated to identify the most suitable development processes. For this reason, this work is focused on the study of the optimization of the washing stages of the hydrogels based on acrylamide and N,N'-methylenebis(acrylamide) once unslanted transmission holograms have been stored. High-performance liquid chromatography and UV-visible measurements have been employed in our system to analyze the composition of the washing solutions. PBST and DMSO:H2O are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38 and 27.6% are reached when PBST and DMSO:H2O are employed, respectively, for the washing process. Holograms show temporal stability after being stored immersed in PBST at 4 degrees C for 4 days., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, Spain, under project PID2019-106601RB-I00 and AdBiHol-PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; Generalitat Valenciana, Spain, under projects CDEIGENT/2018/024, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094 and IDIFEDER/2021/014 (co-funded by European Union through the FEDER Program). M. I. Lucio acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. M. I. Lucio and A. Belendez acknowledge the Programa Propio para el fomento de la I + D + I del Vicerrectorado de Investigacion y Transferencia de Conocimiento of the Universidad de Alicante for the grant "Ayudas para estancias de personal investigador invitado" (INVA20-02). K. Berramdane thanks to the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast DNA biosensing based on isothermal amplification, unmodified gold nanoparticles, and smartphone detection

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The protection of the consumer against foodborne illnesses and fraudulent practices requires methods capable of detecting critical components. Classical instrumental and DNA-based technologies have assay time, portability, and cost limitations. Thus, food control needs alternative methodologies for massive and cost-effective screening. Herein, we report an instrument-free method based on detecting genes that encode proteins related to food allergies and ingredients associated with illegal practices. Tailed recombinase polymerase amplification (tailed-RPA) provided the selective isothermal amplification of target regions. A reproducible and fast optical detection was developed based on the salt-induced aggregation of 15 nm gold nanoparticles (AuNPs). The target presence was directly observed (naked-eye detection) and quantified using a smartphone and RGB image decomposition. The advantages arise from the effective formation of a hybrid complex between non-functionalized nanoparticles and amplification products with a single-strand tail, featuring short incubation time, simplicity, and low sample and reagent volumes. As proof of concept, two targets were determined: trnL gene and ITS region. The first sequence is located in the chloroplast genome of cereals and is valuable to control the adulteration of meat products. The second is a fragment common to the three main gluten-containing cereals, applicable to the indirect detection of this allergen. The novelty also is the integration of a low-cost assay platform and a straightforward interpretation system to foster its implementation in the industry. The RPA-AuNP assay offered a good sensitivity (genomic DNA 0.8 ng), selectivity (absence of unspecific response), reproducibility (standard deviation 2¿11%), and accuracy in marketed food products (100%). Therefore, a competitive biosensing system enables better control according to food industry/consumers demands from Farm to Fork strategy., MINECO Project PID2019-110713RB-I00 and Generalitat Valenciana PROMETEO/2020/094. Students that have supported us during the research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Micro-Patterned Biofunctionalized Hydrogel for Direct Nucleic Acid Hybridization Detection

  • Zezza, Paola
  • Fernández, Estrella
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] The present research is focused on the development of a biofunctionalized hydrogel with a surface diffractive micropattern as a label-free biosensing platform. The biosensors described in this paper were fabricated with a holographic recording of polyethylene terephthalate (PET) surface micro-structures, which were then transferred into a hydrogel material. Acrylamide-based hydrogels were obtained with free radical polymerization, and propargyl acrylate was added as a comonomer, which allowed for covalent immobilization of thiolated oligonucleotide probes into the hydrogel network, via thiol-yne photoclick chemistry. The comonomer was shown to significantly contribute to the immobilization of the probes based on fluorescence imaging. Two different immobilization approaches were demonstrated: during or after hydrogel synthesis. The second approach showed better loading capacity of the bioreceptor groups. Diffraction efficiency measurements of hydrogel gratings at 532 nm showed a selective response reaching a limit of detection in the complementary DNA strand of 2.47 mu M. The label-free biosensor as designed could significantly contribute to direct and accurate analysis in medical diagnosis as it is cheap, easy to fabricate, and works without the need for further reagents., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Science and Innovation (ADBIHOL-PID2019-110713RB-I00/AEI/10.13039/501100011033) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucío acknowledges her Juan de la Cierva-Incorporación grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. P. Zezza acknowledges Generalitat Valenciana for her Grisolia fellowship grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Synthesis and Evaluation of Antigenic Determinants for ß-lactam Allergy Diagnosis

  • Peña Mendizabal, Edurne
[EN] About 10 % of all adverse drug reactions are due to allergies, with ß-lactam antibiotics causing the majority of the episodes. Although the actual incidence remains unknown, individuals suspected of being allergic to a drug end up being prescribed with other medications that are less effective, more expensive or harmful. Consequently, a correct diagnosis is key to reduce the derived economic costs and proceed to an adequate 'delabeling' of the population. At present, clinical approaches to diagnose allergies to ß-lactam antibiotics are based on in vivo and in vitro tests. These tests present limited clinical performances since they are invasive, dangerous, and provide false positives and/or negatives. Moreover, the diagnostic sensitivity is far from what is expected, possibly because the epitopes that cause the allergic episodes are still not well detected. In this respect, the preparation of antigens has commonly been determined by the direct attachment of antibiotics to carrier molecules through the formation of an amide bond between amino lysine groups of the carrier molecule and the carboxylate group of the antibiotic. Even so, specific IgE are barely detected with such antigens. This dissertation addresses the synthesis of haptens and the generation of antigens to ß-lactam antibiotics, which develop a more reliable in vitro diagnosis of allergies to these drugs. The evaluation of the antigens has been carried out by means of multiplex in vitro tests based on compact disc technology. This research begins by focusing on the synthesis and preparation of penicillin antigens. To this end, first, the effect of the incorporation of aliphatic spacer arms in the chemical structure of penicillin has been approached, considering the possibility that a better molecular recognition is obtained by moving the hapten away from the carrier protein. Thirteen haptens derived from benzylpenicillin and amoxicillin were synthesized in order to prepare antigens with human serum albumin. The evaluation of the antigens revealed that even though they were immunogenic and were detected by the raised IgG antibodies, they were not detected by specific IgE from allergic patients. Additionally, the next approach considered the cationization of the carrier proteins, human serum albumin and histone. The modification of carboxylate groups of the protein to amino groups allow for an increase of the molar hapten/protein ratio. This strategy led to the generation of five antigens, four of which (only those histone-based antigens), did increase the sensitivity of the assay. Concretely, specific IgE has been determined in sera from allergic patients at low concentrations (LOD = 0.07 IU/mL) with a diagnostic specificity of 100 % and a sensitivity of 60 and 31 % for benzylpenicillin and amoxicillin, respectively. That means a 60 % improvement in the diagnostic sensitivity when compared to the in vitro reference test. Subsequently, the idea of preparing minor antigens based on penicillin metabolites was approached. Penicilloic, penilloic, penicillic, and 6-aminopenicillanic acids, together with penicillamine, were therefore conjugated to the carrier proteins human serum albumin and histone. Except penilloic acid, the rest of antigens were selectively detected when testing a set of serum samples from allergic patients. The diagnostic specificity obtained was 100 %, 94 % in the case of penicillic acid, and the sensitivity was between 67 and 100 %. Another approach was focused on the production of antigens for other families of ß-lactam antibiotics. The generation of antigens for cephalosporins, carbapenems, monobactams or ß-lactam inhibitors is essential, since in vitro tests for the detection of allergies to these antibiotics are not commercially available. Therefore, the results obtained after the preparation of major and minor antigens for the antibiotics cefuroxime, cefotaxime, ceftriaxone, meropenem, and aztreonam were evaluated., [ES] Alrededor del 10 % de las reacciones adversas a medicamentos son debidas a alergias, siendo los antibióticos ß-lactámicos los que más episodios alérgicos ocasionan. Aunque la incidencia real sigue siendo desconocida, los individuos sospechosos de presentar alergia a algún medicamento acaban siendo prescritos con otros medicamentos, menos efectivos, más caros o perjudiciales. Así pues, un correcto diagnóstico resulta clave para disminuir los costes económicos derivados y proceder a un adecuado 'desetiquetado' de la población. En la actualidad, las pruebas de diagnóstico de alergias a antibióticos ß-lactámicos se basan en ensayos in vivo e in vitro. Estos ensayos muestran bajas prestaciones, ya que son invasivos y peligrosos y proporcionan falsos positivos y/o negativos. Además, la sensibilidad diagnóstica está lejos de ser la esperada, posiblemente porque aún no se ha conseguido reconocer todos los epítopos causantes de los episodios alérgicos. En este sentido, la preparación de antígenos se ha basado hasta el momento, en mayor medida, en la unión directa de los antibióticos a las moléculas portadoras mediante la formación de un enlace amida entre los grupos amino de las lisinas de la molécula portadora y el grupo carboxilato del antibiótico. Aun así, las IgE específicas son vagamente detectadas con estos antígenos. En esta tesis se ha abordado la síntesis de haptenos y la generación de determinantes antigénicos a antibióticos ß-lactámicos con los que poder realizar un diagnóstico in vitro más fiable de alergias a estos fármacos. La evaluación de los mismos se ha llevado a cabo mediante ensayos in vitro multiplex basados en tecnología de disco compacto. Esta investigación comienza centrándose en la síntesis y preparación de antígenos de penicilina. Para ello, en una primera fase se ha estudiado el efecto de la incorporación de brazos espaciadores alifáticos en la generación de antígenos, considerando la posibilidad de que se obtenga un mejor reconocimiento molecular al alejar el hapteno de la proteína portadora. Se sintetizaron trece haptenos derivados de bencilpenicilina y amoxicilina con los que se prepararon antígenos con la proteína albumina de suero humano. La evaluación de los antígenos reveló que a pesar de ser suficientemente inmunogénicos y ser reconocidos por anticuerpos IgG de conejo, éstos no fueron reconocidos por IgE específicas de muestras de pacientes alérgicos. Así bien, por otro lado, la estrategia de cationización de las proteínas albumina de suero humano e histona fue abordada teniendo en cuenta que la modificación de grupos carboxilatos de la proteína a grupos amino aumenta la relación molar hapteno/proteína. Esta estrategia permitió la generación de 5 antígenos, 4 de los cuales (los antígenos de histona), esta vez sí, incrementaron la especificidad de la respuesta inmunológica obtenida, reconociendo IgE específicas. Concretamente, se han determinado IgE específicas en suero de pacientes alérgicos a bajas concentraciones (LOD = 0.07 IU/mL) con una especificidad diagnóstica del 100 % y una sensibilidad del 60 y 31 % para bencilpenicilina y amoxicilina, respectivamente, mejorando la sensibilidad un 60 % en comparación con el ensayo in vitro de referencia. A pesar de las mejoras obtenidas con las estrategias llevadas a cabo, se estudiaron otras vías no clásicas para la síntesis de nuevos haptenos con mayor diversidad química. Este enfoque se basa en la generación de antígenos en librerías químicas de compuestos con diversidad estructural para encontrar nuevos haptenos biológicamente activos. Dichas estrategias, hasta el momento, no han sido empleadas para la generación de antígenos y el análisis de muestras de suero de pacientes alérgicos. Con el fin de incorporar diversidad estructural, se sintetizaron, mediante la técnica combinatoria diversity-oriented synthesis, 22 compuestos de los precursores de las penicilinas y cefalosporinas, ácido 6-aminopenicilánico y ácido 7-amino-desacetoxicefalosporánico, respectivamente, y de los antibióticos amoxicilina y ampicilina. Su evaluación con el inmunoensayo in vitro basado en disco compacto ha demostrado que la incorporación de diversidad permite el reconocimiento de epítopos causantes de episodios alérgicos. Concretamente, se observó que estos antígenos eran capaces de detectar anticuerpos tipo IgG e IgE específicos procedentes de suero de conejos inmunizados y de suero humano de pacientes alérgicos, siendo especialmente selectivos los determinantes de amoxicilina y ampicilina. Concretamente, se obtuvo una sensibilidad diagnóstica del 79 % y una especificidad diagnóstica del 100 %, [CA] Al voltant del 10% de les reaccions adverses a medicaments són degudes a al·lèrgies, sent els antibiòtics ß-lactàmics aquells que més episodis al·lèrgics ocasionen. Encara que la incidència real continua sent desconeguda, els individus sospitosos de presentar al·lèrgia a algun medicament acaben sent prescrits amb altres medicaments, menys efectius, més cars o perjudicials. Així doncs, un correcte diagnòstic resulta clau per a disminuir els costos econòmics derivats i procedir a un adequat 'desetiquetatge' de la població. En l'actualitat, les proves de diagnòstic d'al·lèrgies a antibiòtics ß-lactàmics es basen en assaigs in vivo i in vitro. Aquests assaigs mostren baixes prestacions, ja que són invasius i perillosos i proporcionen falsos positius i/o negatius. A més a més, la sensibilitat diagnòstica està lluny de ser l'esperada, possiblement perquè encara no s'ha aconseguit reconéixer tots els epítopes causants dels episodis al·lèrgics. En aquest sentit, la preparació d'antígens s'ha basat fins al moment, en major mesura, en la unió directa dels antibiòtics a les molècules portadores mitjançant la formació d'un enllaç amida entre els grups amino de les lisines de la molècula portadora i el grup carboxilat de l'antibiòtic. Així i tot, les IgE específiques són vagament detectades amb aquests antígens. En aquesta tesi s'ha abordat la síntesi d'haptens i la generació de determinants antigènics a antibiòtics ß-lactàmics amb els quals poder realitzar un diagnòstic in vitro més fiable d'al·lèrgies a aquests fàrmacs. La seua avaluació s'ha dut a terme mitjançant assaigs in vitro multiplex basats en tecnologia de disc compacte. Aquesta investigació comença centrant-se en la síntesi i preparació d'antígens de penicil·lina. Per a això, en una primera fase s'ha estudiat l'efecte de la incorporació de braços espaiadors alifàtics en la generació d'antígens, considerant la possibilitat que s'obtinga un millor reconeixement molecular en allunyar l'haptè de la proteïna portadora. Es van sintetitzar tretze haptens derivats de bencilpenicil·lina i amoxicil·lina amb els quals es van preparar antígens amb la proteïna albúmina de sèrum humà. L'avaluació dels antígens va revelar que malgrat ser prou immunogènics i ser reconeguts per anticossos IgG de conill, aquests no van ser reconeguts per IgE específiques de mostres de pacients al·lèrgics. Així bé, d'altra banda, l'estratègia de cationització de les proteïnes albúmina de sèrum humà i histona va ser abordada tenint en compte que la modificació dels grups carboxilats de la proteïna a grups amino augmenta la relació molar hapten/proteïna. Aquesta estratègia va permetre la generació de 5 antígens, 4 dels quals (els antígens d'histona), aquesta vegada sí, van incrementar l'especificitat de la resposta immunològica obtinguda, reconeixent IgE específiques. Concretament, s'han determinat IgE específiques en sèrum de pacients al·lèrgics a baixes concentracions (LOD = 0.07 IU/mL) amb una especificitat diagnòstica del 100 % i una sensibilitat del 60 i 31 % per a bencilpenicil·lina i amoxicil·lina, respectivament, millorant la sensibilitat un 60 % en comparació amb l'assaig in vitro de referència. Malgrat les millores obtingudes amb les estratègies dutes a terme, es van estudiar altres vies no clàssiques per a la síntesi de nous haptens amb major diversitat química. Aquest enfocament es basa en la generació d'antígens en llibreries químiques de compostos amb diversitat estructural per a trobar nous haptens biològicament actius. Aquestes estratègies, fins al moment, no han sigut emprades per a la generació d'antígens i l'anàlisi de mostres de sèrum de pacients al·lèrgics. Amb la finalitat d'incorporar diversitat estructural, es van sintetitzar, mitjançant la tècnica combinatòria diversity- oriented synthesis, 22 compostos dels precursors de les penicil·lines i cefalosporines, àcid 6-aminopenicilànic i àcid 7-amino-desacetoxicefalosporànic, respectivament, i dels antibiòtics amoxicil·ina i ampicil·lina. La seua avaluació amb l'immunoassaig in vitro basat en disc compacte ha demostrat que la incorporació de diversitat permet el reconeixement d’epítops causants d'episodis al·lèrgics. Concretament, es va observar que aquests antígens eren capaços de detectar anticossos tipus IgG i IgE específics procedents de sèrum de conills immunitzats i de sèrum humà de pacients al·lèrgics, sent especialment selectius els determinants d’amoxicil·lina i ampicil·lina. Concretament, es va obtindre una sensibilitat diagnòstica del 79 % i una especificitat diagnòstica del 100 %., This work was supported by the H2020 program (project COBIOPHAD, grant agreement No. 688448 awarded to A.M.), being an initiative of the Photonics Public Private Partnership; Agencia Estatal de Investigación Agencia Estatal de Investigación (CTQ2016-75749-R, FEDER) (PID2019-110713RB-I00, FEDER) awarded to S.M.; Generalitat Valenciana (PROMETEO/2020/094 awarded to A.M. & S.M.); program UPV-La FE 2019 (P105 VALBIOAL awarded to S.M & E. I-E.); and the National Institute of General Medical Sciences (GM-1R35GM127045 awarded to S.L.S.). E.P.M. was supported by a FPU fellowship from the Ministerio de Educación, Cultura y Deporte (FPU15/01738 and EST18/00360). B.K.H. was supported by a fellowship from the National Science Foundation (DGE1144152 and DGE1745303). The authors acknowledge the Instituto de Investigación Sanitaria La Fe, Valencia, Spain, which provided the samples from both allergic patients and controls.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simultaneous quantification of six major allergens in commercial foods for children using a Multiplex Array on a Digital Versatile Disc

  • Sena-Torralba, Amadeo
  • Smits, Nathalie G.E.
  • Blázquez, David
  • Albero-Pérez, Clara
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] The hypothesis of this study is centered around the logic that an enhanced analysis of potential allergens during the food production can lead to increased accuracy and reliability of food labeling. The development of a cost-effective and straightforward optoelectrical microanalytical system for the simultaneous quantification of the six most common food allergens (peanut, hazelnut, almond, milk, wheat, and soybean) is presented. The system uses a regular versatile disc (DVD) functionalized with highly selective antibodies in a microarray format and a DVD drive as the optical detector. The multiplexed assay reliably (RSD < 20 %) determines the level of the allergenic proteins ranging from 0.1 to 143.4 ng mL-1. The analysis of food consumables (biscuits, seafood substitutes, and probiotic foods) revealed a 100 % accuracy in identifying the allergens ingredients declared on the label. The method offers potential for application as a high throughput biosensing tool for screening multiple allergens in commercial foods., The research team acknowledges financial support from Paymsa. S. M. awards grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The research was also supported by the Generalitat Valenciana (PROMETEO/2020/094, Proyecto "88/2021"). A. S. acknowledges MINECO for the Juan de la Cierva Formacion fellowship (FJC2020-043927-I). The researchers also gratefully thank Robbie Jennings for carefully revising the English throughout the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A genosensor for detecting single-point mutations in dendron chips after blocked recombinase polymerase amplification

  • Martorell-Tejedor, Sara
  • Maquieira, Angel|||0000-0003-4641-4957
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
[EN] A biosensing system was developed to accurately detect a single nucleotide change in the target organism genome, integrating a selective isothermal amplification and a sensitive dendron-mediated DNA hybridization assay in the array format. The novelty arises from the coupling reactions of the dendron and its use as a crosslinker. The allele-specific probes were oligonucleotide-dendron conjugates prepared by fast and clean click-chemistry (thiol-yne reaction) and coupled onto the photo-activated surface of polycarbonate substrates (carbodiimide reaction). The output was forest-array chips with multipoint-site crosslinkers and compatible with current microarray fabrication technologies. The products of blocked recombinase polymerase amplification (blocked RPA), formed at 37 degrees C, were hybridized with attached probes for specific nucleotide genotyping. The developed approach exhibited sensitive recognition of DNA variants compared to chips based on linear crosslinkers (10-100 fold), showing excellent analytical performances for planar chip and fluidic formats. The methodology was successfully applied to detect the H1047R mutation in the PIK3CA gene (c.3140A > G) from clinical samples of human cancer tissues, the results being consistent with sequencing techniques. The colorimetric biosensing method was reliable, versatile, low cost, sensitive (detection limit genomic DNA: 0.02 ng mu L-1), and specific (accuracy >95%)., The MINECO Project PID2019-110713RB-I00 and Generalitat Valenciana PROMETEO/2020/094 are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reversed-phase allergen microarrays on optical discs for multiplexed diagnostics of food allergies

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
  • Casañ-Raga, Natalia
  • Mas, Salva
  • Ibañez-Echevarria, Ethel
[EN] A high percentage of the population suffers from multiple food allergies justifying the importance of reliable diagnostic methods. Single-analyte solutions based on the determination of specific immunoglobulins E (sIgE) are safe and fast but are generally time-consuming and expensive. Thus sustainable microanalytical methods that provide multianalyte profiling information are highly demanded. This work presents the in vitro biosensing of specific IgE levels based on a reversed-phase allergen array. The approach consists of optical biosensing supported by direct multiplex immunoassays and on-disc technology. It identifies 12 sIgE associated with food allergies in a single analysis with a low serum sample volume (25 ¿L). After processing captured images, specific signals for each target biomarker correlate to their concentration. The assay analytically performs well with 0.3 IU/mL and 0.41 IU/mL as the detection and quantification limits in serum, respectively. This novel method achieves excellent clinical specificity (100%) and high sensitivity (91.1%), considering the diagnosis obtained by clinical history and ImmunoCAP analysis. The results demonstrate that microanalytical systems based on allergen arrays can potentially diagnose multiple food allergies and are easily implemented in primary care laboratory settings., Program UPV-La Fe 2019 (PI05 VALBIOAL) and grant PID2019-110713RB-I00 funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by "ERDF A way of making Europe." The Generalitat Valenciana also supported this research (PROME-TEO/2020/094, Proyecto "88/2021").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Storage Optimization of Transmission Holographic Gratings in Photohydrogels

  • Berramdane, Kheloud
  • Ramírez, Manuel G.
  • Navarro-Fuster, Victor
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Lucío, María Isabel|||0000-0001-7404-352X
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The development and optimization of holographic materials represent a great challenge today. These materials must be synthesized according to the characteristics that are desirable in photonic devices whose application is the object of investigation. In certain holographic sensors and biosensors, it is essential that the recording material be stable in liquid media. Furthermore, the holographic gratings stored in them must have temporal and structural stability, so that they can act as transducers of the analytical signal. Therefore, it is essential to optimize its storage in terms of the chemical composition of the material and the optical parameters of recording. This work focuses on the study of the storage optimization of unslanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N¿-methylenebis(acrylamide). Hydrogel matrices, also composed of acrylamide and N,N¿-methylenebis(acrylamide), with different degrees of cross-linking were used and analyzed by scanning electron microscopy and UV¿visible spectroscopy. The best results in terms of diffraction efficiency were reached for hydrogel matrices with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio between 19.9 and 26. This relationship was also optimized in the incubator solution used to incorporate the components necessary for the formation of the holograms in the hydrogel matrices. The maximum diffraction efficiency, about 35%, was achieved when using an incubation solution with an acrylamide/N,N¿-methylenebis(acrylamide) molar ratio of 4.35. The influence of the physical thickness of the hydrogel layers, the intensity, and the exposure time on the diffraction efficiency was also investigated and optimized. In addition, the behavior of the hologram was analyzed after a washing stage with PBST. A simple model that considered the effects of bending and attenuation of holographic gratings was proposed and used to obtain the optical parameters of the holograms., This research was funded by Ministerio de Ciencia, Innovación y Universidades, Spain, under project Wearopsens-PID2022-140653OB-I00, PID2019-106601RB-I00, AdBiHol-PID2019-110713RB-I00, and PID2021-1231240B-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; and by Generalitat Valenciana, Spain, under projects CIDEXG/2022/60, GRISOLIAP/2019/143, PROMETEO/2021/006, PROMETEO/2020/094, and IDIFEDER/2021/014 (cofunded by the European Union through the FEDER Program). M.I.L. acknowledges her Juan de la Cierva Incorporación grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. K.B. thanks the government of Algeria for her scholarship offered to develop her thesis in the Holography and Optical Processing Group at the University of Alicante (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Label-free detection of C-Reactive protein using bioresponsive hydrogel-based surface relief diffraction gratings

  • Lucío, María Isabel|||0000-0001-7404-352X
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Alamri, Sabri
  • Kunze, Tim
[EN] Responsive hydrogel-based surface relief gratings have demonstrated great performances as transducers in optical sensing. However, novel and smart designs of hydrogels are needed for the appropriate detection of analytes and biomolecules since the existing materials are very limited to specific molecules. In this work, a biosensing system based on surface relief gratings made of bioresponsive hydrogels has been developed. In particular, the hydrogel contains phosphocholine moieties to specifically recognize C-Reactive protein (CRP). The CRP-Sensing hydrogel capacity to selectively detect CRP was fully demonstrated. Using Direct Laser Interference Patterning, micro-gratings were created on CRP-Sensing hydrogel substrates and applied for the label-free sensing of CRP using a simple laser-based homemade optical setup. Limits of detection (LOD) and quantification (LOQ) in human serum dilutions of 1.07 and 8.92 mg L-1, respectively, were reached. These results demonstrate that the biosensing system allows the selective label-free detection of CRP within concentration ranges around those related to risks of cardiovascular diseases and sepsis. Besides, amplification strategies have been carried out improving the sensitivity, widening the linear range, and reaching better LOD and LOQ (0.30 mg L-1 and 4.36 mg L-1). Finally, all the approaches were tested for the quantification of CRP in certified human serum with recoveries of around 100%., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (BiHolog-CTQ2016- 75749-R and AdBiHol-PID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucío acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018-035355-I). The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Standardizing In Vitro beta-Lactam Antibiotic Allergy Testing with Synthetic IgE

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
  • Gozalbo-Rovira, Roberto
  • Rodríguez-Díaz, Jesús
[EN] The global prevalence of ß-lactam allergy poses a major challenge in administering first-line antibiotics, such as penicillins, to a significant portion of the population. The lack of ß-lactam IgE antibody pools with defined selectivity hampers the standardization and validation of in vitro assays for ß-lactam allergy testing. To address this limitation, this study introduces a synthetic IgE specific to ß-lactam antibiotics as a valuable tool for drug allergy research and diagnostic tests. Using phage display technology, we constructed a library of human single-chain antibody fragments (scFv) to target the primary determinant of amoxicillin, a widely used ß-lactam antibiotic. Subsequently, we produced a complete human synthetic IgE molecule using the highly efficient baculovirus expression vector system. This synthetic IgE molecule served as a standard in an in vitro chemiluminescence immunoassay for ß-lactam antibiotic allergy testing. Our results demonstrated a detection limit of 0.05 IU/mL (0.63 pM), excellent specificity (100%), and a four-fold higher clinical sensitivity (73%) compared to the in vitro reference assay when testing a cohort of 150 serum samples. These findings have significant implications for reliable interlaboratory comparison studies, accurate labeling of allergic patients, and combating the global public health threat of antimicrobial resistance. Furthermore, by serving as a valuable trueness control material, the synthetic IgE facilitates the standardization of diagnostic tests for ß-lactam allergy and demonstrates the potential of utilizing this synthetic strategy as a promising approach for generating reference materials in drug allergy research and diagnostics., P.Q.-C. acknowledges financial support from Generalitat Valenciana through the research staff-training program (GVA ACIF/2018/173). S.M. acknowledges grant PID2019-110713RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe . PROMETEO/2020/094 funded by Generalitat Valenciana, program UPV-La FE 2019 (P105 VALBIOAL), the H2020 program (COBIOPHAD project, grant agreement No. 688448). J.R.-D. acknowledges grant PID2020-115403RBC22 funded by MICIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lateral Flow Microimmunoassay (LFIA) for the Reliable Quantification of Allergen Traces in Food Consumables

  • Sena-Torralba, Amadeo
  • Gabaldón-Atienza, Javier
  • Casino, Patricia
  • Cubells-Gómez, Aitor|||0000-0001-6844-3439
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] Quality assurance and food safety are of great concern within the food industry because of unknown quantities of allergens often present in food. Therefore, there is an ongoing need to develop rapid, sensitive, and easy to use methods that serve as an alternative to mass spectrometry and enzyme-linked immunosorbent assay (ELISA) for monitoring food safety. Lateral flow immunoassay is one of the most used point-of-need devices for clinical, environmental, and food safety applications. Compared to traditional methods, it appears to be a simple and fast alternative for detecting food allergens. However, its reliability is frequently questioned due to the lack of quantitative information. In this study, a lateral flow microimmunoassay (LFuIA) is presented that integrates up to 36 spots in microarray format in a single strip, providing semi-quantitative information about the level of allergens, positive and negative controls, internal calibration, and hook effect. The LF IA has been evaluated for the on-site simultaneous and reliable quantification of almond and peanut allergens as a proof of concept, demonstrating high sensitivity (185 and 229 ug/kg, respectively), selectivity (77%), and accuracy (RSD 5¿25%) when analyzing commercial allergen-suspicious food consumables., S.M. awards grant PID2019-110713RB-I00 was funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. P.C. awards grant PID2019-110630 GB-I00 was funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The Generalitat Valenciana also supported the research (PROMETEO/2020/094, Proyecto 88/2021). A.S. acknowledges MINECO for the Juan de la Cierva Formación fellowship (FJC2020-043927-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discrimination of Single-Nucleotide Variants Based on an Allele-Specific Hybridization Chain Reaction and Smartphone Detection

  • Lázaro-Zaragozá, Ana
  • Maquieira, Angel|||0000-0003-4641-4957
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
[EN] Massive DNA testing requires novel technologies to support a sustainable health system. In recent years, DNA superstructures have emerged as alternative probes and transducers. We, herein, report a multiplexed and highly sensitive approach based on an allele-specific hybridization chain reaction (AS-HCR) in the array format to detect single-nucleotide variants. Fast isothermal amplification was developed before activating the HCR process on a chip to work with genomic DNA. The assay principle was demonstrated, and the variables for integrating the AS-HCR process and smartphone-based detection were also studied. The results were compared to a conventional polymerase reaction chain (PCR)-based test. The developed multiplex method enabled higher selectivity against single-base mismatch sequences at concentrations as low as 103 copies with a limit of detection of 0.7% of the mutant DNA percentage and good reproducibility (relative error: 5% for intra-assay and 17% for interassay). As proof of concept, the AS-HCR method was applied to clinical samples, including human cell cultures and biopsied tissues of cancer patients. Accurate identification of single-nucleotide mutations in KRAS and NRAS genes was validated, considering those obtained from the reference sequencing method. To conclude, AS-HCR is a rapid, simple, accurate, and cost-effective isothermal method that detects clinically relevant genetic variants and has a high potential for point-of-care demands., The authors acknowledge the financial support received from EU FEDER, the Spanish Ministry of Economy and Competitiveness (PID2019-110713RB-I00), and the Generalitat Valenciana (PROMETEO/2020/094 and GVA-FPI-2017 Ph.D. grant).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Examination of the composition of incubator solutions employed to preserve unslanted transmission holograms within photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • García-Vázquez, José Carlos
  • Lloret, Tomás
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
Holography's recent surge lies in its capacity to store detailed 3D objects in cost-effective photosensitive materials, revolutionizing fields like renewable energy and biodetection. With laser tech and optical systems already refined, attention shifts to enhancing holographic materials. Stability becomes paramount, especially in biosensing, where hydrogel matrices prove advantageous as binders. These 3D polymers, adept at retaining water, can be chemically tailored to alter their holographic traits based on environmental cues. This study aims to refine transmission hologram storage in photohydrogels by tweaking the photosensitive solution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Storage Optimization of Transmission Holographic Gratings in Photohydrogels

  • Berramdane, Kheloud
  • Lucío, María Isabel
  • Ramirez, Manuel G.
  • Navarro-Fuster, Víctor
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The development and optimization of holographic materials represent a great challenge today. These materials must be synthesized according to the characteristics that are desirable in photonic devices whose application is the object of investigation. In certain holographic sensors and biosensors, it is essential that the recording material be stable in liquid media. Furthermore, the holographic gratings stored in them must have temporal and structural stability, so that they can act as transducers of the analytical signal. Therefore, it is essential to optimize its storage in terms of the chemical composition of the material and the optical parameters of recording. This work focuses on the study of the storage optimization of unslanted transmission volume phase holograms in photohydrogels based on acrylamide and N,N’-methylenebis(acrylamide). Hydrogel matrices, also composed of acrylamide and N,N’-methylenebis(acrylamide), with different degrees of cross-linking were used and analyzed by scanning electron microscopy and UV–visible spectroscopy. The best results in terms of diffraction efficiency were reached for hydrogel matrices with an acrylamide/N,N’-methylenebis(acrylamide) molar ratio between 19.9 and 26. This relationship was also optimized in the incubator solution used to incorporate the components necessary for the formation of the holograms in the hydrogel matrices. The maximum diffraction efficiency, about 35%, was achieved when using an incubation solution with an acrylamide/N,N’-methylenebis(acrylamide) molar ratio of 4.35. The influence of the physical thickness of the hydrogel layers, the intensity, and the exposure time on the diffraction efficiency was also investigated and optimized. In addition, the behavior of the hologram was analyzed after a washing stage with PBST. A simple model that considered the effects of bending and attenuation of holographic gratings was proposed and used to obtain the optical parameters of the holograms.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the composition of the incubator solutions used for the storage of unslanted transmission holograms in photohydrogels

  • Nieto-Rodríguez, Belén
  • Ramirez, Manuel G.
  • Morales-Vidal, Marta
  • Lloret, Tomás
  • García-Vázquez, José Carlos
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Pascual, Inmaculada
  • García-Vázquez, José Carlos|||/items/ea633484-cbfe-44ff-be67-03410b577bea
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Nieto-Rodríguez, Belén|||/items/ca907227-f723-4936-b96d-4b95b2ad977d
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
The development of new holographic materials represents a field of research in continuous evolution. The design and synthesis strategy of these materials must respond to the desirable characteristics of the photonic devices that need to be manufactured. Hydrogels are used as binders in applications in which the material must retain its structural integrity in liquid media. In applications where it is required to store volume holograms in hydrogels, it is necessary to carry out a first incubation process in solutions containing the necessary components. The general aim of this work has been to optimize the composition of incubator solutions composed of acrylamide as monomer, N,N′-methylenebis(acrylamide) as crosslinker, triethanolamine and yellow eosin as photoinitiator system and DMSO/water as solvent. The effect of varying the monomer and crosslinker on the diffraction efficiency of stored holograms has been investigated.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Storage optimization of transmission volume holograms in hydrogel matrix

  • Ramirez, Manuel G.
  • Berramdane, Kheloud
  • Zezza, Paola
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Emerging applications such as holographic sensing [1] require the storage of time-stable volume holographic gratings while the material is immersed in a liquid medium. For this purpose, hydrogels can be used as matrices for the introduction of the necessary components for the hologram formation. Hydrogels are 3D polymer networks capable of undergoing reversible volume changes due to their high swelling capacity. Their liquid permeable structure allows the diffusion of molecules inside their matrix. Unslanted transmission volume phase holographic gratings (TVPHG) with a period of 0.830 μm have been stored in hydrogels based on acrylamide (AAm) and N,N’-methylenebis(acrylamide) (MBA). For this, solutions containing monomer (AAm), crosslinker (MBA) and photoinitiator system (triethanolamine (TEA) and yellowish eosin (YE)) in DMSO:H2O were deposited onto the hydrogel matrices and then exposed with a laser of wavelength 532 nm. TVPHG need to be washed to eliminate the components that do not react during the recording process. With the main objective of optimizing this washing with PBST (phosphate-buffered saline with Tween 20), high-performance liquid chromatography (HPLC) and UV-visible measurements have been employed to analyze the composition of the washing solutions. The recorded holograms were reconstructed using a laser of wavelength 633 nm immediately after the recording process and after each washing stage to obtain the diffraction efficiency (ratio between the intensities of diffracted and incident beams).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Processing of Holographic Hydrogels in Liquid Media: A Study by High-Performance Liquid Chromatography and Diffraction Efficiency

  • Berramdane, Kheloud
  • Ramirez, Manuel G.
  • Zezza, Paola
  • Lucío, María Isabel
  • Bañuls, María-José
  • Maquieira, Ángel
  • Morales-Vidal, Marta
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Morales-Vidal, Marta|||/items/258e6a03-b84a-4ded-a284-40a1cedbb93c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The storage of time-stable holographic gratings in hydrogel matrices when the material is immersed in aqueous media is a real challenge at present. The optimization of the storage stages of the holograms must be properly investigated to identify the most suitable development processes. For this reason, this work is focused on the study of the optimization of the washing stages of the hydrogels based on acrylamide and N,N’-methylenebis(acrylamide) once unslanted transmission holograms have been stored. High-performance liquid chromatography and UV-visible measurements have been employed in our system to analyze the composition of the washing solutions. PBST and DMSO:H2O are used as solvents in the washing stages. The diffraction efficiencies are measured during the washing stages and after the storing of the holograms during several days in PBST. Maximum diffraction efficiencies of 38 and 27.6% are reached when PBST and DMSO:H2O are employed, respectively, for the washing process. Holograms show temporal stability after being stored immersed in PBST at 4 °C for 4 days.