Pasar al contenido principal

SILICON NITRIDE SPECTROMETERS

TEC2016-80385-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Code Division Multiplexing Applied to FBG Sensing Networks: FBG Sensors Designed as Discrete Prolate Spheroidal Sequences (DPSS-FBG Sensors)

  • Triana-Infante, Cristian Andres
  • Varón, Margarita
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
[EN] We propose and demonstrate a sensing system with fiber Bragg grating sensors designed as discrete prolate spheroidal sequences (DPSS). In this way, we can encode all of the sensing devices in the network making sure that each sensor is completely distinguishable from each other even under overlapping conditions. Since these devices are complex structures involving unique magnitude and phase response, the demodulation method should be able to recover the associated magnitude and phase response in order to identify each device in the sensing network. To do so, we use a single side band modulated optical source sweeping over the operational wavelength range of the sensors, the reflected signal from the sensors is sent to a vector network analyzer in which it is obtained the magnitude and phase ratio of the network in the microwave domain. Experimental demonstration has been carried out including the manufacturing of DPSS structures. Feasibility of the interrogation technique for devices involving magnitude and phase distinction has been validated, not only to identify encoded sensors in a measurement network but also to allow overlapping between them, which allow to increase the number of sensors allocated in the sensing network., This work was supported in part by the Spanish MCINN through projects TEC2016-80385-P, TEC2013-42332-P, and TEC 2009-12169; and in part by the Colombian Science, Technology and Innovation department (Colciencias) through Ph.D. call 567.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silicon Nitride Photonic Integration Platforms for Visible, Near-Infrared and Mid-Infrared Applications

  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Alemany Server, Ruben
  • Mico-Cabanes, Gloria
  • Bru-Orgiles, Luis Alberto
  • Pérez-López, Daniel
  • Doménech Gómez, José David
  • Fernández, Juan
  • Baños López, Rocío
  • Gargallo-Jaquotot, Bernardo
  • Sanchez, Ana M.
  • Cirera, Josep Maria
  • Mas, Roser
  • Domínguez-Horna, Carlos
[EN] Silicon nitride photonics is on the rise owing to the broadband nature of the material, allowing applications of biophotonics, tele/datacom, optical signal processing and sensing, from visible, through near to mid-infrared wavelengths. In this paper, a review of the state of the art of silicon nitride strip waveguide platforms is provided, alongside the experimental results on the development of a versatile 300 nm guiding film height silicon nitride platform., The authors acknowledge financial support through projects TEC2013-42332-P, TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, TEC2014-54449-C3-1-R, GVA PROMETEO 2013/012 and EC H2020-ICT-27-2015 PICs4all. G.M. acknowledges BES-2014-068523, L.A.B. acknowledges PTA2015-11309-I, J.F. acknowledges DI-15-08031 and R.B. acknowledges PTQ-15-07966.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Foundry Developments Toward Silicon Nitride Photonics From Visible to the Mid-Infrared

  • P. Muñoz|||0000-0001-6026-1649
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • van Dijk, Paulus W. L.
  • Geuzebroek, Douwe
  • Geiselmann, Michael
  • Domínguez, Carlos
  • Stassen, Andim
  • Doménech, José David
  • Zervas, Michael
  • Leinse, Arne
  • Roeloffzen, Chris G.H.
  • Gargallo, Bernardo
  • Baños, Rocio
  • Fernández, Juan
  • Bru-Orgiles, Luis Alberto
[EN] Photonic integration technologies have spread in the past decade by means of foundry models that mirror the electronic-integrated circuit industry developments of the past century. Several monolithic technologies exist, based on silicon and III-V semiconductors. In this paper, we discuss the current state and forthcoming developments of open access photonic foundries whose technology platforms are based on silicon nitride material. The paper presents various silicon nitride technologies and foundries, alongside with access models supported by generic integration and process design kits. Technical features, enabled by different micro-fabrication processes and tools are summarized. Application examples and developments of forthcoming incorporation into these platforms are outlined., This work was supported in part by the Spanish MINECO projects TEC2016-80385-P SINXPECT, in part by TEC2014-54449-C3-1-R, in part by the EC H2020-ICT-27-2015 PICs4all CSA 687777, in part by the DARPA DODOS program, in part by H2020-ICT-2017-1 MOICANA RIA 780537, and in part by PIX4life IP 688519. The work of R. Banos was supported by PTQ-15-07966. The work of J. Fernandez was supported by DI-15-08031. The work of G. M. Cabanes was supported by BES-2014-068523. The work of L. A. Bru was supported by PTA2015-11309-I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated optical frequency domain reflectometry device for characterization of complex integrated devices

  • Bru-Orgiles, Luis Alberto
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] Because of the demand for advanced measurement systems in the field of modern photonic integrated circuits, optical frequency domain reflectometry (OFDR) is a robust technique for characterizing design-to-fabrication deviations. In this paper we report an OFDR device where the interferometric part is monolithically integrated along with the device under test. We discuss the advantages in terms of compactness and performance, and the importance of the incorporated dispersion de-embedding mechanism. Experimental validation is carried out by interrogating an arrayed waveguide grating on a silicon nitride platform. The results establish the proposed device as a first step in the quest for a universal test structure for integrated devices. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, Spanish national projects, Ministerio de Economia y Competitividad (TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, PTA2015-11309-I); Generalitat Valenciana (GVA PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated Optic Sensing Spectrometer: Concept and Design

  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
  • Gargallo-Jaquotot, Bernardo
[EN] In this paper the concept and design of an integrated optical device featuring evanescent field sensing and spectrometric analysis is presented. The device, termed integrated optics sensing spectrometer (IOSS), consists of a modified arrayed waveguide grating (AWG) which arms are engineered into two sets having different focal points. Half of the arms are exposed to the outer media, while the other half are left isolated, thus the device can provide both sensing and reference spectra. Two reference designs are provided for the visible and near-infrared wavelengths, aimed at the determination of the concentration of known solutes through absorption spectroscopy., This research was funded by Spanish MINECO projects grant number TEC2015-69787-REDT (PIC4TB) and TEC2016-80385-P (SINXPECT), as well as FPI doctoral grant BES-2014-068523.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Bragg gratings of proteins patterned on integrated waveguides for (bio)chemical analysis

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Bru-Orgiles, Luis Alberto
[EN] The incorporation of biomacromolecules onto silicon waveguiding microstructures constitutes a growing trend that pushes towards compact and miniaturized biosensing systems. This paper presents the integration of one-dimensional periodic nanostructures of proteins on the surface of micrometric silicon waveguides for transducing binding events between biomacromolecules. The study demonstrates this new bioanalytical principle by experimental results and theoretical calculations, and proves that rib waveguides (1-¿1.6-µm width) together with protein gratings (495-¿515-nm period) display suitable spectral responses for this optical biosensing system. Protein assemblies of bovine serum albumin are fabricated on the surface of silicon nitride waveguides, characterized by electron microscopy, and their response is measured by optical frequency domain reflectometry along the fabrication process and the subsequent stages of the biorecognition assays. Detection and quantification limits of 0.3 and 3.7 µg·mL¿1, respectively, of specific antibodies are inferred from experimental dose¿response curves. Among other interesting features, the results of this study point towards new miniaturized and integrated sensors for label-free bioanalysis., Funding was provided by grants PID2019-110713RB-I00, TED2021-132584B-C21, and PID2019-110877GB-I00 funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and co-funded by ERDF A way of making Europe , Ministerio de Economía y Competitividad (TEC2016-80385-P), Generalitat Valenciana (PROMETEO/2020/094, PROMETEO/2021/015, IDIFEDER/2021/046), and Universitat Politècnica de València (PAID-06 22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced and versatile interferometric technique for the characterization of photonic integrated devices

  • Bru-Orgiles, Luis Alberto
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] Adaptable and complex optical characterization of photonic integrated devices, permitting to unearth possible design and fabrication errors in the different workflow steps are highly desired in the community. Here, we propose a technique capable of resolving full optical amplitude and phase response, in both frequency and time domains, of a photonic integrated device. It relies on optical frequency domain interferometry and makes use of a novel integrated architecture; a 3-way interferometer enabling single input and single output detection. We derive the test structure design rules and provide extensive experimental validation in silicon nitride and silicon on insulator technologies, by testing relevant devices such as arrayed waveguide grating, Mach-Zehnder interferometers, and ring resonators. Horizontal and vertical chip coupling, different external setup arrangements, and the optical dispersion de-embedding inherent to the technique are demonstrated. Finally, we discuss why this characterization approach might lay the groundwork of a standard testing tool for photonic integrated devices., Ministerio de Economia y Competitividad (PTA2015-11309-I, TEC2015-69787-REDT PIC4TB, TEC201680385-P SINXPECT); Ministerio de Ciencia, Innovacion y Universidades (PID2019-110877GB-I00 BHYSINPICS); Generalitat Valenciana (GVA PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BIO bragg gratings on microfibers for label-free biosensing

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Delgado-Pinar, Martina
  • Fernández-Sánchez, María Estrella
  • Andrés, Miguel V.
[EN] Discovering nanoscale phenomena to sense biorecognition events introduces new perspectives to exploit nano science and nanotechnology for bioanalytical purposes. Here we present Bio Bragg Gratings (BBGs), a novel biosensing approach that consists of diffractive structures of protein bioreceptors patterned on the surface of optical waveguides, and tailored to transduce the magnitude of biorecognition assays into the intensity of single peaks in the reflection spectrum. This work addresses the design, fabrication, and optimization of this system by both theoretical and experimental studies to explore the fundamental physicochemical parameters involved. Functional biomolecular gratings are fabricated by microcontact printing on the surface of tapered optical microfibers, and their structural features were characterized. The transduction principle is experimentally demonstrated, and its quantitative bioanalytical prospects are assessed in a representative immunoassay, based on patterned protein probes and selective IgG targets, in label-free conditions. This biosensing system involves appealing perspectives to avoid unwanted signal contributions from non-specific binding, herein investigated in human serum samples. The work also proves how the optical response of the system can be easily tuned, and it provides insights into the relevance of this feature to conceive multiplexed BBG systems capable to perform multiple label-free biorecognition assays in a single device., Spanish Ministry of Science and Innovation (CTQ2016-75749-R and TEC2016-80385-P), Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (PID2019-110877 GB-I00 and PDI2019-104276RB-I00) and Generalitat Valenciana (PROMETEO/2019/048 and PROMETEO/2017/103). A.J.-D. acknowledges the FPI-UPV 2017 grant program, M.A.-O acknowledges the APSOSTD/2019 program of the GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-Optic Phase Tuners Analysis and Design for Process Modules on a Silicon Nitride Platform

  • Alemany Server, Ruben
  • P. Muñoz|||0000-0001-6026-1649
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Domínguez, Carlos
[EN] In this paper, we present a systematic design for manufacturing analysis for thermo-optic phase tuners, framed within the process modules available on a silicon nitride platform. Departing from an established technology platform, the heat distribution in various micro-structures was analyzed, both in steady and transient states, employing a 2D heat transfer model solved numerically. Multi-parametric simulations were performed on designs combining trenches and substrate undercut, by varying their position and dimensions. The simulation results were compared to a reference conventional fully-clad cross-section. Deep air-filled trenches are shown to reduce the power consumption up to 70%, alongside a thermal crosstalk phase shift reduction of more than one order of magnitude (0.045 pi rad/mm), at the expense of a slightly lower bandwidth (11.8 kHz). The design with trenches and substrate undercut lowers the power consumption up to 97%, decreases two orders of magnitude the crosstalk (0.006 pi rad/mm), at the cost of less than one order of magnitude in bandwidth (0.9 kHz). In the works, we selected three different heater materials (Cr/Au, Al, poly-silicon) offered by the fab and four different heater widths (2.5 to 7 mu m). Their combinations are related to performance, reliability and durability of the devices, strongly linked to temperature, current density, and Omegaic resistance. The different figures of merit defined, and the methodology followed, can be mimicked by future designers to take design decisions at bird's eye., Funding This research was funded by Ministry of Economy, Industry and Competitiveness grants numbers TEC2016-80385-P SINXPECT and PID2019-110877GB-I00 BHYSINPICS, Generalitat Valenciana grant number PROMETEO/2017/103, Ministry of Science, Innovation and Universities grant number MCIU-RTI2018-100773-B-C31 and by H2020 Marie Sklodowska Curie Innovative Training Network grant number MICROCOMB (GA 812818).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Code Division Design Strategy for Multiplexing Fiber Bragg Grating Sensing Networks

  • Triana-Infante, Cristian Andres
  • Varón, Margarita
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
This work was supported by the Spanish MCInn through projects TEC2016-80385-P, TEC2013-42332-P and TEC2009-12169; and by the Colombian Science, Technology and Innovation Department (Colciencias) through PhD call 567.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reconfigurable reflective arrayed waveguide grating using optimization algorithms

  • Fernández, Juan
  • Felip, Joan
  • Gargallo, Bernardo
  • Doménech, José David
  • Domínguez-Horna, Carlos
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report the experimental realization of a reconfigurable reflective arrayed waveguide grating on silicon nitride technology, using optimization algorithms borrowed from machine learning applications. A dozen of band-shape responses, as well as a spectral resolution change, are demonstrated in the optical telecom C-band, alongside a proof of operation of the same device in the O-band. In the context of programmable and reconfigurable integrated photonics, this building block supports multi-wavelength/band spectral shaping of optical signals that can serve to multiple applications., Ministerio de Economia y Competitividad (Industrial doctorate grant DI-15-08031, PID2019110877GB-I00 BHYSINPICS, TEC2016-80385-P SINXPECT); H2020 Marie Sklodowska-Curie Actions (Training Network MICROCOMB (GA 812818)); Generalitat Valenciana (PROMETEO/2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Linear Propagation Properties for a 300 nm Film Height Silicon Nitride Photonic Integration Platform in the Optical Telecom C-band

  • Bru-Orgiles, Luis Alberto
  • Pérez-López, Daniel
  • Doménech, David
  • Sanchez, Ana M.
  • Cirera, Josep M.
  • Sanchez, Javier
  • Domínguez, Carlos
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report on the characterization of the propagation loss, group index, dispersion, birefringence, and thermo-optic phase shift of Si 3 N 4 strip waveguides with guiding film height of 300 nm fabricated using low-preassure chemical vapour deposition, The authors acknowledge financial support through projects TEC2013-42332-P, TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, TEC2014-54449-C3-1-R, GVA PROMETEO 2013/012, EC H2020-ICT-27-2015 CSA 687777 and IP 688519, FEDER UPVOV 10-3E-492 and 08- 3E-008. G.M. acknowledges BES-2014-068523. L.B. acknowledges PTA2015-11309-I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-loss inverted taper edge coupler in silicon nitride

  • Fernández-Vicente, Juan
  • Baños Lopez, Rocio
  • Doménech Gómez, José David
  • Domínguez-Horna, Carlos
  • P. Muñoz|||0000-0001-6026-1649
[EN] An inverted lateral taper with one vertical discrete step was designed for a medium confinement silicon nitride waveguide platform in the C-band, as a chip edge coupler, with a predicted insertion loss of 0.58¿dB. The design is supported by an extensive study to evaluate the impact of fabrication process variations on the performance of such a coupler. The device was manufactured and measured, showing an insertion loss of 1.47 dB, which was traced back to fabrication process variations as cross-checked with simulations. To the authors¿ knowledge, the reported edge coupler is the shortest and among the best performing found for silicon nitride platforms., The authors acknowledge financial support through projects TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, TEC2014-54449-C3-1-R, GVA PROMETEO 2017/103, EC H2020-ICT-27-2015 PICs4all CSA 68777.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Interrogation of a spectrally overlapped sensing network through phase and amplitude encoding of super-structured FBG sensors

  • Triana Infante, Cristian Andrés
  • Varón, Margarita
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
[EN] Phase and amplitude encoded FBG sensors are proposed. We present their experimental identification under overlapping conditions using a dual-wavelength interrogation setup to retrieve the frequency response of the sensing network, This work was supported by the Spanish MCINN projects TEC2016-80385-P, TEC2013-42332-P and TEC 2009-12169; and by the Colombian Science, Technology and Innovation department (Colciencias) through PhD call 567